Bob Hook Chevrolet 2011 Chevy Volt Owners Manual

2011 Chevrolet Volt Owner Manual MIn Brief . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Storage . . . . . . . . . . . . . . . . . . . . . . . 4-1 Navigation . . . . . . . . . . . . . . . . . . . . 7-39 Instrument Panel . . . . . . . . . . . . . . 1-2 Storage Compartments . . . . . . . . 4-1 Voice Recognition . . . . . . . . . . . . 7-77 Initial Drive Information . . . . . . . . 1-4 Additional Storage Features . . . 4-2 Phone . . . . . . . . . . . . . . . . . . . . . . . . 7-85 Vehicle Features . . . . . . . . . . . . . 1-15 Battery and Efficiency. . . . . . . . 1-18 Instruments and Controls . . . . 5-1 Climate Controls . . . . . . . . . . . . . 8-1 Performance and Instrument Panel Overview . . . . 5-4 Climate Control Systems . . . . . . 8-1 Maintenance . . . . . . . . . . . . . . . . 1-23 Controls . . . . . . . . . . . . . . . . . . . . . . . 5-6 Air Vents . . . . . . . . . . . . . . . . . . . . . . . 8-9 Warning Lights, Gauges, andKeys, Doors and Windows . . . 2-1 Indicators . . . . . . . . . . . . . . . . . . . . 5-9 Driving and Operating . . . . . . . . 9-1 Keys and Locks . . . . . . . . . . . . . . . 2-2 Information Displays . . . . . . . . . . 5-31 Driving Information . . . . . . . . . . . . . 9-2 Doors . . . . . . . . . . . . . . . . . . . . . . . . 2-12 Vehicle Messages . . . . . . . . . . . . 5-45 Starting and Operating . . . . . . . 9-18 Vehicle Security. . . . . . . . . . . . . . 2-13 Vehicle Personalization . . . . . . . 5-53 Electric Vehicle Operating Exterior Mirrors . . . . . . . . . . . . . . . 2-15 Universal Remote System . . . . 5-60 Modes . . . . . . . . . . . . . . . . . . . . . . 9-24 Interior Mirrors . . . . . . . . . . . . . . . . 2-16 Engine Exhaust . . . . . . . . . . . . . . 9-30 Windows . . . . . . . . . . . . . . . . . . . . . 2-16 Lighting . . . . . . . . . . . . . . . . . . . . . . . 6-1 Electric Drive Unit . . . . . . . . . . . . 9-32 Exterior Lighting . . . . . . . . . . . . . . . 6-1 Brakes . . . . . . . . . . . . . . . . . . . . . . . 9-33Seats and Restraints . . . . . . . . . 3-1 Interior Lighting . . . . . . . . . . . . . . . . 6-5 Ride Control Systems . . . . . . . . 9-37 Head Restraints . . . . . . . . . . . . . . . 3-2 Lighting Features . . . . . . . . . . . . . . 6-5 Cruise Control . . . . . . . . . . . . . . . . 9-40 Front Seats . . . . . . . . . . . . . . . . . . . . 3-4 Object Detection Systems . . . . 9-43 Rear Seats . . . . . . . . . . . . . . . . . . . . 3-8 Infotainment System . . . . . . . . . 7-1 Charging . . . . . . . . . . . . . . . . . . . . . 9-49 Safety Belts . . . . . . . . . . . . . . . . . . 3-10 Introduction . . . . . . . . . . . . . . . . . . . . 7-2 Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . 9-57 Airbag System . . . . . . . . . . . . . . . . 3-25 Radio . . . . . . . . . . . . . . . . . . . . . . . . . 7-10 Towing . . . . . . . . . . . . . . . . . . . . . . . 9-62 Child Restraints . . . . . . . . . . . . . . 3-41 Audio Players . . . . . . . . . . . . . . . . 7-18 Conversions and Add-Ons . . . 9-63

2011 Chevrolet Volt Owner Manual MVehicle Care . . . . . . . . . . . . . . . . . 10-1 Technical Data . . . . . . . . . . . . . . . 12-1 General Information . . . . . . . . . . 10-3 Vehicle Identification . . . . . . . . . 12-1 Vehicle Checks . . . . . . . . . . . . . . . 10-8 Vehicle Data . . . . . . . . . . . . . . . . . . 12-2 Headlamp Aiming . . . . . . . . . . . 10-32 Bulb Replacement . . . . . . . . . . 10-34 Customer Information . . . . . . . 13-1 Electrical System . . . . . . . . . . . . 10-37 Customer Information . . . . . . . . 13-1 Wheels and Tires . . . . . . . . . . . 10-48 Reporting Safety Defects . . . . 13-24 Jump Starting . . . . . . . . . . . . . . . 10-79 Vehicle Data Recording and Towing . . . . . . . . . . . . . . . . . . . . . . 10-84 Privacy. . . . . . . . . . . . . . . . . . . . 13-26 Appearance Care . . . . . . . . . . . 10-89 Index . . . . . . . . . . . . . . . . . . . . . i-1Service and Maintenance . . . 11-1 General Information . . . . . . . . . . 11-1 Scheduled Maintenance . . . . . . 11-2 Recommended Fluids, Lubricants, and Parts . . . . . . . 11-6 Maintenance Records . . . . . . . . 11-8

Introduction iii This manual describes features that Canadian Vehicle Owners may or may not be on your specific vehicle either because they are Propriétaires Canadiens options that you did not purchase A French language copy of this or due to changes subsequent to manual can be obtained from your the printing of this owner manual. dealer or from: Please refer to the purchaseThe names, logos, emblems, documentation relating to your On peut obtenir un exemplaire deslogans, vehicle model names, specific vehicle to confirm each ce guide en français auprès duand vehicle body designs appearing of the features found on your concessionnaire ou à ladressein this manual including, but vehicle. For vehicles first sold suivante:not limited to, GM, the GM logo, in Canada, substitute the nameCHEVROLET, the CHEVROLET Helm, Incorporated “General Motors of Canada Limited” P.O. Box 07130Emblem, VOLT, and the VOLT for Chevrolet Motor Divisionlogo are trademarks and/or service Detroit, MI 48207 wherever it appears in this manual.marks of General Motors LLC, its 1-800-551-4123subsidiaries, affiliates, or licensors. Keep this manual in the vehicle for Numéro de poste 6438 quick reference. de langue française www.helminc.comLitho in U.S.A. ©Part No. 20819514 B Second Printing 2010 General Motors LLC. All Rights Reserved.

iv IntroductionUsing this Manual Symbols { WARNINGTo quickly locate information The vehicle has components andabout the vehicle, use the Index These mean there is something labels that use symbols instead ofin the back of the manual. It is an that could hurt you or other text. Symbols are shown along withalphabetical list of what is in the people. the text describing the operation ormanual and the page number information relating to a specificwhere it can be found. component, control, message, Notice: This means there is gauge, or indicator. something that could resultDanger, Warnings, and in property or vehicle damage. M : This symbol is shownCautions This would not be covered by when you need to see your owner the vehicles warranty. manual for additional instructionsWarning messages found on vehicle or information.labels and in this manual describehazards and what to do to avoid or * : This symbol is shown whenreduce them. you need to see a service manual for additional instructions orDanger indicates a hazard with a information.high level of risk which will result inserious injury or death.Warning or Caution indicates a A circle with a slash through ithazard that could result in injury or is a safety symbol which meansdeath. “Do Not,” “Do not do this,” or “Do not let this happen.”

Introduction vVehicle Symbol Chart O : Exterior LampsHere are some additional symbols y : Faultthat may be found on the vehicleand what they mean. For more g : First Responderinformation on the symbol, refer . : Fuel Gaugeto the Index. + : Fuses9 : Airbag Readiness Light 3 : Headlamp High/Low-Beam# : Air Conditioning Changer! : Antilock Brake System (ABS) _: High Voltageb g : Audio Steering Wheel ® j: LATCH System ChildControls or OnStar RestraintsI: Brake System Warning [ : LeafLight * : Malfunction Indicator LampA : Charge Port Door : : Oil Pressure" : Charging System O : Power(12‐Volt Battery)I : Cruise Control B : Remote Vehicle Startf : Electric Parking Brake > : Safety Belt Remindersd : Electronic Stability 7 : Tire Pressure MonitorControl (ESC) M : Windshield Washer FluidB: Engine Coolant Temperature

vi Introduction 2 NOTES

In Brief 1-1In Brief Interior Lighting . . . . . . . . . . . . . . 1-11 Exterior Lighting . . . . . . . . . . . . . 1-11 Performance and Maintenance Traction Control Windshield Wiper/Washer . . . . 1-12 System (TCS) . . . . . . . . . . . . . . 1-23 Climate Controls . . . . . . . . . . . . . 1-13 Electronic StabilityInstrument Panel Control (ESC) . . . . . . . . . . . . . . 1-23 Instrument Panel . . . . . . . . . . . . . . 1-2 Vehicle Features Tire Pressure Monitor . . . . . . . . 1-23 Radio(s) . . . . . . . . . . . . . . . . . . . . . 1-15 Tire Sealant andInitial Drive Information Satellite Radio . . . . . . . . . . . . . . . 1-15 Initial Drive Information . . . . . . . . 1-4 Compressor Kit . . . . . . . . . . . . . 1-24 Portable Audio Devices . . . . . . 1-15 Engine Oil Life System . . . . . . 1-24 Remote Keyless Entry (RKE) Bluetooth® . . . . . . . . . . . . . . . . . . . 1-16 System . . . . . . . . . . . . . . . . . . . . . . 1-4 Driving for Better Energy Steering Wheel Controls . . . . . 1-16 Efficiency . . . . . . . . . . . . . . . . . . . 1-25 Remote Start . . . . . . . . . . . . . . . . . . 1-5 Cruise Control . . . . . . . . . . . . . . . 1-17 Door Locks . . . . . . . . . . . . . . . . . . . 1-5 Roadside Assistance Navigation System . . . . . . . . . . . 1-17 Program . . . . . . . . . . . . . . . . . . . . 1-27 Windows . . . . . . . . . . . . . . . . . . . . . . 1-6 Power Outlets . . . . . . . . . . . . . . . 1-17 Seat Adjustment . . . . . . . . . . . . . . 1-6 OnStar® . . . . . . . . . . . . . . . . . . . . . 1-27 Heated Seats . . . . . . . . . . . . . . . . . 1-8 Battery and Efficiency Head Restraint Adjustment . . . . 1-9 High Voltage Safety Safety Belts . . . . . . . . . . . . . . . . . . . 1-9 Information . . . . . . . . . . . . . . . . . 1-18 Sensing System for Charging . . . . . . . . . . . . . . . . . . . . . 1-18 Passenger Airbag . . . . . . . . . . 1-10 Fueling . . . . . . . . . . . . . . . . . . . . . . 1-21 Mirror Adjustment . . . . . . . . . . . . 1-10 Total Vehicle Range . . . . . . . . . 1-22 Steering Wheel Regenerative Braking . . . . . . . . 1-22 Adjustment . . . . . . . . . . . . . . . . . 1-11 Service . . . . . . . . . . . . . . . . . . . . . . 1-23

1-2 In BriefInstrument Panel

In Brief 1-3A. Air Vents on page 8‑9. H. Light Sensor. See Daytime R. Leaf Button. See Center StackB. Turn and Lane‐Change Lever. Running Lamps (DRL) on Display on page 5‑31. See Turn and Lane-Change page 6‑3. S. DRIVE MODE Button. Signals on page 6‑4. I. Instrument Panel Storage on See Driver Selected Operating Exterior Lamp Controls on page 4‑1. Modes on page 9‑26. page 6‑1. J. Automatic Climate Control T. Power Button on page 9‑18. Pedestrian Friendly Alert on System on page 8‑1. U. Shift Lever. See Electric Drive page 6‑2. K. Driver Information Center (DIC) Unit on page 9‑32.C. Instrument Cluster on page 5‑9. Controls. See Driver Information V. Infotainment on page 7‑2. Center (DIC) on page 5‑43. Driver Information Center (DIC) Navigation System. See Using Display. See Driver Information L. Instrument Panel Illumination the Navigation System on Center (DIC) on page 5‑43. Control on page 6‑5. page 7‑39.D. Windshield Wiper/Washer on M. Data Link Connector (DLC) W. Electric Parking Brake on page 5‑7. (Out of View). See Malfunction page 9‑35. Indicator Lamp on page 5‑21.E. Heated Front Seats on page 3‑6 X. Power Door Locks on (If Equipped). N. Cruise Control on page 9‑40. page 2‑11.F. Center Stack Display on O. Steering Wheel Adjustment on Y. Hazard Warning Flashers on page 5‑31. page 5‑6. page 6‑4.G. Charging Status Indicator. P. Horn on page 5‑7. Z. Glove Box on page 4‑1. See Charging Status Feedback Q. Steering Wheel Controls on on page 9‑52. page 5‑6 (If Equipped).

1-4 In BriefInitial Drive Remote Keyless Q: Press to lock all doors.Information Entry (RKE) System Lock and unlock feedback can The Remote Keyless Entry (RKE) be personalized. See VehicleThis section provides a brief Personalization on page 5‑53.overview about some of the transmitter will work up to 60 mimportant features that may (195 ft) away from the vehicle. 7 : Press and release to locateor may not be on your specific the vehicle. Press and hold forvehicle. three seconds to sound the panic alarm. Press again to cancel theFor more detailed information, refer panic alarm.to each of the features which can befound later in this owner manual. B : Press Q and then press and hold B within five seconds to start the vehicles heating or air conditioning systems and rear window defogger from outside the vehicle using the RKE transmitter. See Remote Start on page 2‑8 for more information. Press the key release button to A : Press to open the charge extend the key. The key can be port door. See Plug-In Charging on used for all locks. page 9‑49 for more information. K: Press once to unlock the driver See Keys on page 2‑2 and Remote door. Press a second time within Keyless Entry (RKE) System five seconds to unlock all doors. Operation on page 2‑3.

In Brief 1-5Remote Start After entering the vehicle during a Door Locks remote start, press the POWER OThis feature starts the heating or To lock or unlock the door, useair conditioning systems and rear button on the center stack with the the Remote Keyless Entry (RKE)window defogger from outside the brake pedal applied to operate as transmitter or the key from outsidevehicle. Normal operation of the normal. the vehicle. Use the door lock knobsystem will return after the vehicle Canceling Remote Start or switch from inside the vehicle.has been turned on. The engine See Door Locks on page 2‑10.may start to support the climate To cancel a remote start, do any ofcontrol operation. the following: Power Door Locks . Aim the RKE transmitter at theActivating the Remote Start vehicle and press and hold B1. Aim the RKE transmitter at the until the parking lamps turn off. vehicle. . Turn on the hazard warning2. Press Q on the RKE transmitter; flashers. the doors will lock. . Press the POWER O button on3. Within five seconds, press and the center stack, with the brake hold B until the turn signal pedal applied, then press the lamps flash or for approximately POWER O button again to turn four seconds. Pressing B again the vehicle off. during a remote start will turn the See Remote Start on page 2‑8. feature off. The power door lock switches are on the center stack. K: Press to unlock the doors. Q: Press to lock the doors.

1-6 In BriefSee Power Door Locks on Windows Seat Adjustmentpage 2‑11. Seat PositionHatch To adjust the seat position: The power window switches 1. Pull the handle at the front of the are on the driver door armrest. seat cushion to unlock it.To open the hatch, with all doors Each passenger door has a switch 2. Move the seat forward orunlocked, press the button on the that controls only that window. rearward and release theunderside of the hatch and lift up. Press the front of the switch to lower handle.Always close the hatch before the window. Pull the switch up to 3. Try to move the seat back anddriving. Do not press the button raise it. forth to be sure it is locked inwhile closing the hatch; it will unlock The driver and passenger windows place.it again. have an express-down feature and See Seat Adjustment on page 3‑4.See Hatch on page 2‑12. the driver window has express-up. See Power Windows on page 2‑17.

In Brief 1-7Height Adjustment Reclining Seatbacks To return the seatback to the upright position: 1. Lift the lever fully without applying pressure to the seatback, and the seatback will return to the upright position. 2. Push and pull on the seatback to make sure it is locked. See Reclining Seatbacks on page 3‑4.Move the lever up or down to raise To recline the seatback:or lower the seat. 1. Lift the lever.See “Seat Height Adjuster” under 2. Move the seatback to theSeat Adjustment on page 3‑4. desired position, and then release the lever to lock the seatback in place. 3. Push and pull on the seatback to make sure it is locked.

1-8 In BriefHeated Seats Press M or L to heat the driver Auto Heated Seats or passenger seat cushion and seatback. Press the button once for the highest setting. With each press of the button, the heated seat will change to the next lower setting, and then the off setting. Three lights indicate the highest setting and one light the lowest. See Heated Front Seats on page 3‑6 for more information.If available, the controls are on the If available, the controls can becenter stack. To operate, the vehicle accessed while the vehicle is on bymust be on. pressing the CLIMATE button on the center stack.

In Brief 1-9Press the touch screen M AUTO or Head Restraint Safety BeltsL AUTO button. The button color Adjustmentwill change to green when thisfeature is on. Do not drive until the head restraints for all occupants are installed andWhen the vehicle is on, this feature adjusted properly.will automatically activate theheated seats at the level required To achieve a comfortable seatingby the vehicles interior temperature. position, change the seatbackThe active high, medium, low, or off recline angle as little as necessaryheated seat level will be indicated while keeping the seat and theby the manual heated seat button head restraint height in the properlights on the center stack. Use the position.touch screen buttons or the manual For more information see Headheated seat buttons on the center Restraints on page 3‑2 and Seatstack to turn auto heated seats off. Adjustment on page 3‑4. Refer to the following sections forSee Heated Front Seats on important information on how to usepage 3‑6 for more information. safety belts properly.The heated seats can also be . Safety Belts on page 3‑10.programmed to come on during a . How to Wear Safety Beltsremote start. See “Remote Start Properly on page 3‑13.Auto Heat Seats” under VehiclePersonalization on page 5‑53 for . Lap-Shoulder Belt on page 3‑19.more information. . Lower Anchors and Tethers for Children (LATCH System) on page 3‑49.

1-10 In BriefSensing System for Mirror Adjustment To adjust a mirror:Passenger Airbag Exterior 1. Move the selector switch to L (left) or R (right) to choose Mirrors can be folded inward toward the driver or passenger mirror. the vehicle to prevent damage when 2. Press the arrows on the control going through an automatic car pad to move each mirror in the wash. Push the mirror outward to desired direction. return it to the original position. 3. Return the selector switch to the See Folding Mirrors on page 2‑16. center position.The passenger sensing system willturn off the right front passenger See Power Mirrors on page 2‑15.frontal airbag and passenger knee When the rear window defoggerairbag under certain conditions. is activated, the heated mirriors,The driver airbags, seat‐mounted if equipped, will also come on.side impact airbags, and roof‐rail See Heated Mirrors on page 2‑16.airbags are not affected by thepassenger sensing system. See InteriorPassenger Sensing System on The vehicle has an automaticpage 3‑33 for more information. dimming inside rearview mirror.The passenger airbag status Automatic dimming reduces theindicator will be visible on the glare from the headlamps of theoverhead console when the vehicle vehicle behind you. The dimmingis started. See Passenger Airbag Controls for the outside power feature and the indicator light comeStatus Indicator on page 5‑20. mirrors are on the driver door. on each time the vehicle is started. Hold the mirror in the center to adjust it. See Automatic Dimming Rearview Mirror on page 2‑16.

In Brief 1-11Steering Wheel Interior Lighting Exterior LightingAdjustment Dome Lamps The dome lamp controls are in the overhead console. To operate, press the following buttons: + : Press to turn on the dome lamps. The exterior lamp control is on the turn signal/lane change lever. 1 : Press to turn the lamps on automatically when a door is O : Turn to operate the exterior opened. lamps. * : Press to turn the lamps off, O: Turns the exterior lamps off. even when a door is open. AUTO: Turns the exterior lamps onTo adjust the steering wheel: Reading Lamps and off automatically depending on1. Pull the lever (A) down. the exterior light. The front reading lamps are in the2. Move the steering wheel up overhead console. or down. #$: Press to turn each lamp on3. Pull or push the steering wheel or off. closer or away from you. For more information on interior4. Pull the lever (A) up to lock the lighting, see Instrument Panel steering wheel in place. Illumination Control on page 6‑5.Do not adjust the steering wheelwhile driving.

1-12 In Brief; : Turns on the parking lamps, Windshield Wiper/Washertogether with the sidemarker lamps,taillamps, license plate lamps, andinstrument panel lights.5 : Turns on the headlamps,together with the parking lamps,sidemarker lamps, taillamps, licenseplate lamps, and instrument panel G: Move the lever up to G forlights. adjustable interval wipes, then turn The windshield wiper lever is the band up for more frequent wipesFor more information, see: on the side of the steering column. or down for less frequent wipes. With the vehicle on, move the. Exterior Lamp Controls on windshield wiper lever to select 9 : Use to turn the windshield page 6‑1. the wiper speed. wipers off.. Turn and Lane-Change Signals 2: Move the lever up to 2 for fast 3 : For a single wipe, briefly move on page 6‑4. wipes. the wiper lever down. For several. Headlamp High/Low-Beam wipes, hold the wiper lever down. 1: Move the lever up to 1 for slow Changer on page 6‑2. wipes. Windshield Washer Pull the windshield wiper lever toward you to spray windshield washer fluid and activate the wipers. See Windshield Wiper/Washer on page 5‑7.

In Brief 1-13Climate ControlsHeating, cooling, and ventilation can be controlled by using the climatecontrol buttons and the climate touch screen. Climate Control ButtonsA. Temperature Control D. ClimateB. Driver and Passenger Heated E. Auto (Automatic Operation) Seats F. Rear Window DefoggerC. Defrost G. Manual Fan Control

1-14 In Brief F. Climate Modes: Fan Only, ECO, Comfort G. Climate Power Gauge H. Manual Fan Control I. Temperature Setting Display J. Air Conditioning Indicator K. Heat Status Indicator See Automatic Climate Control System on page 8‑1. Auto Heated Seats are selected using the climate control touch screen. See Heated Front Seats on page 3‑6. Climate Touch Screen ControlsA. Driver and Passenger Auto D. Manual Recirculation Heated Seats E. Outside Air TemperatureB. Air Delivery Mode Controls DisplayC. Auto Recirculation

In Brief 1-15Vehicle Features XM Satellite Radio Service Portable Audio Devices XM is a satellite radio service based This vehicle has a 3.5 mm (1/8 in)Radio(s) in the 48 contiguous United States auxiliary input and a USB port and 10 Canadian provinces. XM located in the center stack.This vehicles radio is part of the Satellite Radio has a wide variety ofnavigation system. See Infotainment External devices such as iPods®, programming and commercial-free laptop computers, MP3 players, CDon page 7‑2. music, coast to coast, and in changers, and USB storage devices digital-quality sound. A fee is may be connected, depending onSatellite Radio required to receive the XM service. the audio system.Vehicles with an XM™ Satellite For more information refer to: For more information, see AuxiliaryRadio tuner and a valid XM Satellite Devices on page 7‑38.Radio subscription can receive XM . www.xmradio.com or callprogramming. 1-800-929-2100 (U.S.). . www.xmradio.ca or call 1-877-438-9677 (Canada). For more information, see Satellite Radio on page 7‑16.

1-16 In BriefBluetooth® Steering Wheel Controls $ / i : Press to silence the vehicle speakers only. Press againThe Bluetooth system allows users to turn the sound on. For vehicleswith a Bluetooth-enabled cell phone with OnStar or Bluetooth systems,to make and receive hands-free press to reject an incoming call,calls using the vehicle audio or to end a current call.system, microphone, and controls.The Bluetooth-enabled cell phone _ SRC ^ : Turn _ or ^ to select a radio band or audio source.must be paired with the in-vehicleBluetooth system before it can be Turn _ or ^ to select the next orused in the vehicle. Not all phones previous favorite radio station, CD,will support all functions. or MP3 track.See Bluetooth on page 7‑85. Press SRC to change between radio and CD or DVD. For vehicles with audio steering + x −: Press + to increase or − to wheel controls, some audio controls decrease the volume. can be adjusted at the steering wheel. For more information, see Steering Wheel Controls on page 5‑6. b / g : Press to interact with the available Bluetooth, OnStar, or navigation system.

In Brief 1-17Cruise Control RES/+ : Move the thumbwheel up Power Outlets to resume to a previously set speed or to accelerate. The accessory power outlets can be used to plug in electrical equipment, SET/− : Move the thumbwheel such as a cell phone or MP3 player. down to set a speed and activate cruise control or to make the vehicle There are three accessory power decelerate. outlets: . Inside the front of the center See Cruise Control on page 9‑40. floor console. Navigation System . On the rear of the center floor console. The vehicle has a navigation system . Inside the instrument panel that includes information about the radio, audio players, and navigation storage area.The cruise control buttons are on system. The power outlets supply powerthe steering wheel. The navigation system provides while the vehicle is on, or if the detailed maps of most major vehicle is in Retained Accessory1 : Press to turn the cruise control freeways and roads. After a Power (RAP). See Retainedsystem on and off. An indicator light destination has been set, the Accessory Power (RAP) onwill turn on or off in the instrument system provides turn-by-turn page 9‑22.cluster. instructions for reaching the Remove the cover to access and*: Press to disengage cruise destination. In addition, the system replace when not in use.control without erasing the set can help locate a variety of POIsspeed from memory. (Points of Interest), such as banks, See Power Outlets on page 5‑8. airports, restaurants, and more. See Infotainment on page 7‑2 for more information.

1-18 In BriefBattery and Efficiency If the vehicle is in a crash, the Charging sensing system may shut down the high voltage system. When this The high voltage battery canHigh Voltage Safety occurs, the high voltage battery is be charged using a householdInformation disconnected and the vehicle will electrical outlet. There are three not start. The SERVICE VEHICLE ways to program how the vehicle is charged. See Charging on { WARNING SOON message in the Driver Information Center (DIC) will be page 5‑33 for more information. Exposure to high voltage displayed. Before the vehicle can This section explains the process can cause shock, burns, and be operated again, it must be for charging the high voltage battery. even death. The high voltage serviced at your dealer. Do not allow the vehicle to remain components in the vehicle can See Battery on page 10‑28 for in temperature extremes for long only be serviced by technicians important safety information. If an periods without being driven or with special training. airbag has inflated, see What Will plugged in. It is recommended that You See after an Airbag Inflates? on the vehicle be plugged in when High voltage components are temperatures are below 0°C (32°F) page 3‑31. identified by labels. Do not and above 32°C (90°F) to maximize remove, open, take apart, Only a trained service technician high voltage battery life. or modify these components. with the proper knowledge and tools should inspect, test, or replace The charging system may run fans High voltage cable or wiring has the high voltage battery. See your and pumps that result in sounds orange covering. Do not probe, dealer if the high voltage battery from the vehicle while it is turned tamper with, cut, or modify high off. Additional unexpected clicking voltage cable or wiring. needs service. sounds may be experienced caused See Battery on page 10‑28. by the electrical devices used whileThis vehicle has a high voltage charging.battery and a standard 12‐voltbattery.

In Brief 1-19Charging In cold weather conditions, ice It is located near the tire sealant may form around the charge port and compressor kit (C). Pull upStart Charge door. The charge port door may on the charge cord handle (D) not open on the first attempt. to release it from the handle Remove ice from the area and clip (E). Lift the charge cord up repeat attempting to open the and rearward to remove it from charge port door. the vehicle. The vehicle plug (B) is stored as shown. 3. Plug the charge cord into the electrical outlet. See Electrical Requirements for Battery Charging on page 9‑56. Verify that the charge cord status indicators are both green. See Charge Cord on page 9‑54 for more information.1. The charge port door release button is on the driver door inner trim panel. With the vehicle in P (Park), press the button for one second and release to open 2. Open the rear hatch, lift the load the charge port door. The charge support floor covering (A), and port door can also be opened remove the charge cord (D). using the RKE transmitter. See Remote Keyless Entry (RKE) System Operation on page 2‑3.

1-20 In Brief End Charge 4. Unplug the charge cord from the 1. Unlock the vehicle with the RKE electrical outlet. transmitter to disarm the charge 5. Before storing the charge cord, cord theft alert. have the charge cord face up and wrap the charge cable neatly counterclockwise around the body of the charge cord.4. Then plug in the vehicle plug of the charge cord into the charge port on the vehicle. Verify that 2. Unplug the vehicle plug of the the charging status indicator charge cord from the vehicle by illuminates on top of the squeezing the vehicle plug lever instrument panel and a horn and pull to remove. chirp occurs. See Charging 3. Close the charge port door by Status Feedback on page 9‑52 pressing firmly in the center to for more information. latch properly.5. To arm the charge cord theft alert, lock the vehicle with the RKE transmitter. This feature can be disabled by a service technician.

In Brief 1-21 While the charge cord is plugged into the vehicle, the vehicle cannot be driven. Fueling The fuel system on this vehicle requires a refueling process to control evaporative emissions. To refuel the vehicle: 2. When the READY TO REFUEL message displays, the fuel door on the passenger side will6. Place the charge cord, unlock. Push the rearward edge face down, into the storage of the fuel door in and release to compartment with the front open the door. edge (F) of the charge cord body under the clips (G) located in the front of the storage compartment. The vehicle plug (B) should be on the right side of the charge cord.7. Push the charge cord handle down until it locks into the handle clip at the rear of the 1. Press the fuel door button on storage compartment. the driver door for one second. A WAIT TO REFUEL message displays on the Driver Information Center.

1-22 In Brief3. Turn the fuel cap Total Vehicle Range Regenerative Braking counterclockwise to remove. While refueling, hang the fuel Regenerative braking takes some of cap tether from the hook on the energy from the moving vehicle the inside of the fuel door. and turns it back into electrical Complete refueling within energy. This energy is then stored 30 minutes of pushing the back into the high voltage battery fuel door button found on the system, contributing to increased driver side door. If refueling energy efficiency. more than 30 minutes, push See Regenerative Braking on the fuel door button again. page 9‑37.4. After refueling, reinstall the fuel cap by turning it clockwise until it Total vehicle range is the remaining clicks. Close the fuel door. distance the vehicle can be driven combining the electric range andSee Filling the Tank on page 9‑60. fuel range. See Driving for Better Energy Efficiency on page 9‑2.

In Brief 1-23Service Performance and Tire Pressure Monitor Maintenance This vehicle may have a Tire { WARNING Pressure Monitor System (TPMS).Never try to do your own service Traction Controlon high voltage components. System (TCS)You can be injured and the The Traction Control System limitsvehicle can be damaged if you wheel spin. The system turns ontry to do your own service work. automatically every time the vehicleService and repair of these high is on and cannot be turned off.voltage components should The TPMS warning light alerts youonly be performed by a trained For more information, see Traction Control System (TCS) on to a significant loss in pressure ofservice technician with the proper one of the vehicles tires. If theknowledge and tools. See Doing page 9‑37. warning light comes on, stop asYour Own Service Work on soon as possible and inflate thepage 10‑8. Electronic Stability tires to the recommended pressure Control (ESC) shown on the Tire and Loading Electronic Stability Control assists Information label. See Vehicle Load with directional control of the Limits on page 9‑14. The warning vehicle in difficult driving conditions. light will remain on until the tire The system turns on automatically pressure is corrected. every time the vehicle is on and cannot be turned off. For more information, see Electronic Stability Control (ESC) on page 9‑39.

1-24 In BriefDuring cooler conditions, the low tire Tire Sealant and Resetting the Oil Life Systempressure warning light may appearwhen the vehicle is first started and Compressor Kit 1. Use the SELECT knob to select OIL LIFE on the DIC menu.then turn off. This may be an early This vehicle may have a tire sealantindicator that the tire pressures are and compressor kit that can be used 2. Press SELECT to start thegetting low and the tires need to be to seal small punctures in the tread OIL LIFE reset procedure.inflated to the proper pressure. area of the tire. Significant sidewall 3. The DIC menu will display “AreThe TPMS does not replace normal damage will require the tire to be you sure that you want to reset?”monthly tire maintenance. It is the replaced. Use SELECT to choose YES todriver’s responsibility to maintain See Tire Sealant and Compressor reset oil life or NO to exit andcorrect tire pressures. Kit on page 10‑71 for complete return to the previous menu.See Tire Pressure Monitor System operating information. 4. If YES is selected, the DIC menuon page 10‑55. will display RESET OIL LIFE for Engine Oil Life System a short time and then 100% OIL The engine oil life system calculates LIFE will be displayed when engine oil life based on vehicle use OIL LIFE is successfully reset. and displays the CHANGE ENGINE See Engine Oil Life System on OIL SOON message when it is time page 10‑15. to change the engine oil and filter. The oil life system should be reset to 100% only following an oil change.

In Brief 1-25Driving for Better Energy Acceleration/Braking/Coasting Drive Mode and PRNDL SelectionEfficiency Avoid unnecessary rapid Use Normal Mode when possible. accelerations and decelerations. Sport Mode provides moreUse the following tips to helpmaximize energy efficiency and Electric range is maximized at responsive acceleration thanrange. 80 km/h (50 mph) and below. Higher Normal Mode but can reduce speeds use more energy and can efficiency.Driving Style significantly reduce electric range. Use Mountain Mode prior toEfficiency Gauge Use cruise control when climbing long, steep grades in(Instrument Cluster) appropriate. mountainous areas. Be sure toThe ball indicator should be kept Plan ahead for decelerations engage Mountain Mode beforegreen and in the center of the and coast whenever possible. starting to climb. Mountain Modegauge. For example, do not rush to traffic reduces electric range and power signals. but may be needed to maintainInefficient acceleration is indicated speeds above 96 km/h (60 mph)when the ball turns yellow and Do not shift to N (Neutral) to coast. when climbing grades of 5% ortravels above the center of the The vehicle recovers energy while greater.gauge. coasting and braking in D (Drive) or L (Low). Use L (Low) in heavy stop‐and‐goAggressive braking is indicated traffic or when traveling downhill.when the ball turns yellow and L (Low) requires less braketravels below the center of the pedal application and providesgauge. a controlled, efficient way to slow the vehicle down.

1-26 In BriefClimate Setting Use the auto heated seat feature Maintenance instead of climate settings. Heating Always keep the tires properlyUsing the heat and air conditioning the seat uses less energy than inflated and the vehicle properlysystems decreases the energy heating the vehicle interior. aligned.available for electric driving. Use remote start to heat or cool The weight of excess cargo in theOptimal energy efficiency is the interior when the vehicle is vehicle affects efficiency and range.achieved with the heat, air plugged in to maximize the electric Avoid carrying more than is needed.conditioning, and fan turned off. range by utilizing electricity from theLess energy is used at low fan electrical outlet. If fuel is not regularly used, considerspeeds. When using the fan: keeping the fuel tank only one‐third In hot weather, avoid parking in full. Excess fuel weight impacts. Fan Only is the most energy direct sunlight or use sunshades efficiency and range. efficient climate setting as long inside the vehicle. as 0 is not selected. Use premium fuel. Turn off the front and rear window. ECO is for moderate air defog/defrost when they are no Avoid unnecessary use of electrical conditioning and heater longer needed. accessories. Power used for operation and is the next most functions other than propelling the Avoid driving with the windows open vehicle will reduce EV range. energy efficient setting as long at highway speeds. as 0 is not selected. Using a rooftop carrier will reduce Vehicle Charging/Maintenance efficiency due to additional weight. Comfort provides the most and drag. comfort but is the least energy Charging efficient. Keep the vehicle plugged in, even when fully charged, to keep the battery temperature ready for the next drive. This is important when outside temperatures are extremely hot or cold.

In Brief 1-27Roadside Assistance Roadside Assistance and OnStar OnStar®Program If you have an active OnStarU.S.: 1-888-811-1926 subscription, press the Q button and the current GPS location willTTY Users: 1-888-889-2438 be sent to an OnStar advisor whoCanada: 1-800-268-6800 will assess your problem, contact Roadside Assistance, and relayAs the owner of a new Chevrolet, your exact location to get the helpyou are automatically enrolled in you need.the Roadside Assistance program. For vehicles with an active OnStarThis program provides security Online Owner Center subscription, OnStar uses severaland convenience in the event of innovative technologies and live The Online Owner Center is a Advisors to provide a wide rangean on-road failure or emergency complimentary service that includessituation. Service is provided of safety, security, navigation, online service reminders, vehicle diagnostics, and calling services.24 hours a day, 365 days a year for maintenance tips, online ownerthe 5 year/160 000 km (100,000 mi) manual, special privileges, Automatic Crash Responsecoverage period. and more. In a crash, built‐in sensorsSee Roadside Assistance Program Sign up today at: automatically alert an OnStaron page 13‑6 for more information. www.chevyownercenter.com Advisor who is immediately (U.S.) or www.gm.ca (Canada). connected to the vehicle to see if you need help.

1-28 In BriefHow OnStar Service Works OnStar at 1-888-4-ONSTAR reception, and technology (1‐888‐466‐7827) or TTY compatible with OnStar service.Q: Push this blue button to 1‐877‐248‐2080, or push Service involving locationconnect to a specially trainedOnStar Advisor to verify your the Q button to speak with an information about your vehicle OnStar Advisor 24 hours a day, cannot work unless GPS signalsaccount information and to seven days a week. are available, unobstructed,answer questions. and compatible with the OnStar] : Push this red emergency For a full description of OnStar hardware. The vehicle must havebutton to get priority help from services and system limitations, a working electrical system andspecially trained OnStar Emergency see the OnStar Owners Guide in adequate 12‐volt battery power forAdvisors. the glove box. the OnStar equipment to operate.X : Push this button for hands‐free, OnStar service is subject to the OnStar service may not work if thevoice‐activated calling and to give OnStar Terms and Conditions OnStar equipment is not properlyvoice commands for Hands‐Free included in the OnStar Glove installed or you have not maintainedCalling and Turn‐by‐Turn Box Kit. it even if your vehicle is in goodNavigation. working order and in compliance OnStar service requires wireless with all government regulations.Automatic Crash Response, communication networks and the If you try to add, connect, or modifyEmergency Services, Crisis Assist, Global Positioning System (GPS) any equipment or software in yourStolen Vehicle Assistance, Vehicle satellite network. Not all OnStar vehicle, OnStar service may notDiagnostics, Remote Door Unlock, services are available everywhere work. Other problems beyondRoadside Assistance, Turn‐by‐Turn or on all vehicles at all times. OnStars control may preventNavigation, and Hands‐Free Calling OnStar service cannot work unless service to you, such as hills,are available on most vehicles. Not your vehicle is in a place where tall buildings, tunnels, weather,all OnStar services are available on OnStar has an agreement with electrical system design andall vehicles. For more information a wireless service provider for architecture of your vehicle, damagesee the OnStar Owners Guide service in that area, and the to important parts of your vehicleor visit www.onstar.com (U.S.) or wireless service provider has in a crash, or wireless phonewww.onstar.ca (Canada), contact coverage, network capacity, network congestion or jamming.

In Brief 1-29See Radio Frequency Your Responsibility OnStar®Statement on page 13‑28 for Increase the volume of the radio If the vehicle is equipped withinformation regarding Part 15 if the OnStar Advisor cannot be an active OnStar system, thatof the Federal Communications heard. system may also record data inCommission (FCC) rules and If the light next to the OnStar crash or near crash-like situations.Industry Canada Standards buttons is red, the system may The OnStar Terms and ConditionsRSS-210/220/310. not be functioning properly. provides information on dataOnStar Steering Wheel collection and use and is available Push Q and request a vehicle in the OnStar Glove Box Kit,Controls diagnostic check. If the light at www.onstar.com (U.S.) orThis vehicle may have talk and appears clear or no light appears, www.onstar.ca (Canada), or bymute buttons that can be used to your OnStar subscription hasinteract with OnStar Hands-Free pushing Q and speaking to an expired and all services have beenCalling. See Steering Wheel Advisor. deactivated. Push Q to confirm thatControls on page 5‑6 for more the OnStar equipment is active.information.On some vehicles, the mute buttoncan be used to dial numbers intovoice mail systems, or to dial phoneextensions. See the OnStar OwnersGuide for more information.

1-30 In Brief 2 NOTES

Keys, Doors and Windows 2-1Keys, Doors and Doors Hatch . . . . . . . . . . . . . . . . . . . . . . . . 2-12 Interior Mirrors Automatic Dimming RearviewWindows Vehicle Security Mirror . . . . . . . . . . . . . . . . . . . . . . . 2-16 Vehicle Security . . . . . . . . . . . . . . 2-13 Windows Anti-theft Alarm System . . . . . . 2-13 Windows . . . . . . . . . . . . . . . . . . . . . 2-16Keys and Locks Immobilizer . . . . . . . . . . . . . . . . . . 2-14 Power Windows . . . . . . . . . . . . . 2-17 Keys . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2 Immobilizer Operation . . . . . . . 2-14 Sun Visors . . . . . . . . . . . . . . . . . . . 2-19 Remote Keyless Entry (RKE) System . . . . . . . . . . . . . . . . . . . . . . 2-3 Exterior Mirrors Remote Keyless Entry (RKE) Convex Mirrors . . . . . . . . . . . . . . 2-15 System Operation . . . . . . . . . . . 2-3 Power Mirrors . . . . . . . . . . . . . . . . 2-15 Remote Start . . . . . . . . . . . . . . . . . . 2-8 Folding Mirrors . . . . . . . . . . . . . . . 2-16 Door Locks . . . . . . . . . . . . . . . . . . 2-10 Heated Mirrors . . . . . . . . . . . . . . . 2-16 Power Door Locks . . . . . . . . . . . 2-11 Delayed Locking . . . . . . . . . . . . . 2-11 Automatic Door Locks . . . . . . . 2-11 Lockout Protection . . . . . . . . . . . 2-11 Safety Locks . . . . . . . . . . . . . . . . . 2-12

2-2 Keys, Doors and WindowsKeys and Locks The key that is part of the RKE The key has a bar-coded key tag transmitter can be used for all locks. that the dealer or qualified locksmith can use to make new keys. StoreKeys this information in a safe place, not in the vehicle. { WARNING See your dealer if a replacementLeaving children in a vehicle with key or an additional key is needed.the Remote Keyless Entry (RKE) Notice: If the keys get lockedtransmitter is dangerous for many in the vehicle, it may have to bereasons; children or others could damaged to get them out. Alwaysbe badly injured or even killed. carry a spare key.They could operate the power If locked out of the vehicle, call thewindows or other controls or Roadside Assistance Center. Seeeven make the vehicle move. Roadside Assistance Program onThe windows will function with Press the key release button on the page 13‑6. With an active OnStarthe RKE transmitter in the vehicle RKE transmitter to extend the key. subscription, an OnStar Advisorand they could be seriously Press the key release button and may remotely unlock the vehicle.injured or killed if caught in fold the key blade to retract the key. See OnStar® on page 1‑27.the path of a closing window.Do not leave the RKE transmitterin a vehicle with children.

Keys, Doors and Windows 2-3Remote Keyless Remote Keyless Entry The hazard warning lamps will flash twice each time the buttonEntry (RKE) System (RKE) System Operation is pressed and the anti-theftSee Radio Frequency The RKE transmitter functions will alarm system will be disarmed.Statement on page 13‑28 for work up to 60 m (195 ft) away from See Anti-theft Alarm System oninformation regarding Part 15 the vehicle. page 2‑13.of the Federal Communications Keep in mind that other conditions, Q (Lock): Press to lock all doors.Commission (FCC) rules and such as those previously stated, The hazard warning lamps will flashIndustry Canada Standards can impact the performance of the once and the anti-theft alarm systemRSS-210/220/310. transmitter. will be armed. See Anti-theft AlarmIf there is a decrease in the RKE System on page 2‑13.operating range: If the driver door is open when Q is. Check the distance. pressed, all doors lock and then The transmitter may be the driver door will unlock if the too far from the vehicle. Unlocked Door Anti Lock Out. Check the location. Other feature is enabled through vehicles or objects may be the vehicle personalization. blocking the signal. See “Unlocked Door Anti Lock Out Feature” under Vehicle. Check the transmitters battery. Personalization on page 5‑53 for See “Battery Replacement” later more information. This may vary in this section. based on vehicle personalization.. If the transmitter is still not working correctly, see your dealer or a qualified technician K (Unlock): Press once to unlock for service. the driver door. Press a second time within five seconds to unlock all doors.

2-4 Keys, Doors and Windows7 (Panic Alarm): Press and A (Charge Port Door): Press Programming with a Recognizedrelease one time to locate the to open the charge port door. Transmittervehicle. The exterior lamps flash See Plug-In Charging on page 9‑49 A new transmitter can beand the horn chirps three times. for more information. programmed to the vehiclePress and hold for three seconds when there is one recognizedto sound the panic alarm. The horn Programming Transmitters to transmitter. For vehicles soldsounds and the turn signals flash for the Vehicle in Canada, two recognized30 seconds. Press again to cancel Only RKE transmitters transmitters are required to programthe panic alarm. programmed to this vehicle a new transmitter. To program,B (Remote Start): Press Q and will work. If a transmitter is lost the vehicle must be off and all or stolen, a replacement can be of the transmitters, both currentlythen press and hold B within purchased and programmed through recognized and new, must be infive seconds to start the vehicles your dealer. When the replacement the vehicle.heating or air conditioning systems transmitter is programmed to this 1. Place the recognizedand rear window defogger from vehicle, all remaining transmitters transmitter(s) in the cupholder.outside the vehicle using the RKE must also be reprogrammed.transmitter. See Remote Start on 2. Insert the vehicle key of the new Any lost or stolen transmitterspage 2‑8 for more information. transmitter into the key lock will no longer work once theThe auto heated seats, if equipped, new transmitter is programmed. cylinder on the outside of thecan be programmed to come Each vehicle can have up to driver door and turn the key toon when the vehicle is remotely five transmitters matched to it. the unlock position five timesstarted. See Vehicle Personalization within 10 seconds.on page 5‑53 for more information. The Driver Information CenterAlso see “Auto Heated Seats” under (DIC) displays READY FORHeated Front Seats on page 3‑6. REMOTE #2, 3, 4 OR 5.

Keys, Doors and Windows 2-5 4. Press and hold the POWER O Programming without a button on the center stack Recognized Transmitter for two seconds. When the Non-Canadian (U.S.) owners transmitter is programmed, the are permitted to program a DIC will show that it is ready to new transmitter to their vehicle program the next transmitter. when a recognized transmitter 5. Remove the transmitter from the is not available. The Canadian regulations require that Canadian transmitter slot and press K on owners see their dealer for the transmitter. programming new transmitters To program additional when two recognized transmitters transmitters, repeat Steps 3 are not available. If there are no3. Remove the rubber mat in through 5. currently recognized transmitters the instrument panel storage. available, follow this procedure to When all additional transmitters Extend the key blade on the new program up to five transmitters. are programmed, press and transmitter and insert the key hold the POWER O button blade into the transmitter slot. for 10 seconds to exit programming mode.

2-6 Keys, Doors and WindowsThis procedure will take 3. Repeat Step 2 two more times. 5. Press and hold the POWER Oapproximately 30 minutes to After the third time, all previously button for two seconds. Whencomplete. The vehicle must be known transmitters will no longer the transmitter is programmed,off and all of the transmitters work with the vehicle. Remaining the DIC will show that it is readymust be in the vehicle. transmitters can be programmed to program the next transmitter.1. Insert the vehicle key of the during the next steps. 6. Remove the transmitter from the transmitter into the key lock The DIC display should transmitter slot and press K on cylinder on the outside of the now show READY FOR driver door and turn the key to REMOTE # 1. the transmitter. the unlock position five times To program additional within 10 seconds. transmitters, repeat Steps 4 The Driver Information Center through 6. (DIC) displays REMOTE LEARN When all additional transmitters PENDING, PLEASE WAIT. are programmed, press and2. Wait for 10 minutes until the hold the POWER O button DIC displays PRESS START for 10 seconds to exit BUTTON TO LEARN and then programming mode. press the POWER O button on the center stack. The DIC display will again show REMOTE LEARN PENDING, PLEASE WAIT. 4. Remove the rubber mat in the instrument panel storage. Extend the key blade on the new transmitter and insert the key blade into the transmitter slot.

Keys, Doors and Windows 2-7Starting the Vehicle with a Low Battery ReplacementTransmitter Battery Notice: When replacing theIf the transmitter battery is weak, battery, do not touch any ofthe DIC may display NO REMOTE the circuitry on the transmitter.DETECTED when you try to Static from your body couldstart the vehicle. The REPLACE damage the transmitter.BATTERY IN REMOTE KEY To replace the battery:message may also be displayedat this time. 1. Extend the key blade and open the battery cover on the back ofTo start the vehicle: the unit.1. Open the instrument panel 2. Remove the used battery. storage and remove the 2. Extend the key blade and place Avoid touching the circuit board rubber mat. the blade into the slot. to other components. 3. With the vehicle in P (Park) or 3. Insert the new battery, positive N (Neutral), press the brake side facing down toward pedal and the POWER O button the base. on the center stack. See Power 4. Reassemble the battery cover. Button on page 9‑18 for additional information. 5. Check the operation of the transmitter with the vehicle. Replace the transmitter battery as soon as possible.

2-8 Keys, Doors and Windows . If the vehicle has heated . The engine may start to provideRemote Start seats, and this feature has energy for heating and cooling,This feature starts the heating or been enabled through vehicle independent of the vehicle beingair conditioning systems and rear personalization, the heated plugged in or completelywindow defogger from outside the seats will turn on during charged.vehicle. Use remote start to heat or colder outside temperatures. . Vehicle range may decreasecool the interior when the vehicle See “Remote Start Heated if the vehicle is not pluggedplugged in to maximize the electric Seats” under Heated Front into an electrical outlet. If therange by utilizing electricity from the Seats on page 3‑6 and Vehicle vehicle is plugged in, much ofelectrical outlet. Normal operation Personalization on page 5‑53 the energy needed to supportof the system will return after the for additional information. this feature will be provided fromvehicle has been turned on. . The rear defogger will turn the utility, not from the highB (Remote Start): This button is on during colder outside voltage battery.on the RKE transmitter. temperatures. Laws in some communitiesDuring remote start: . Selecting 1 during colder may restrict the use of features. The climate control system outside temperatures before that remotely start the engine. will typically default to the last shutting the vehicle off will For example, some laws may climate settings. If Fan Off or help windshield clearing. require a person using the remote Fan Only were selected, the start feature to have the vehicle in . Shutting the vehicle off in ECO view when doing so. Check local air conditioning or heat will turn on as needed. See Automatic Mode without 1 selected will regulations for any requirements Climate Control System on minimize the impact to electric on remote starting of vehicles. page 8‑1 for more information. range. Shutting the vehicle off in other modes will maximize heating or air conditioning.

Keys, Doors and Windows 2-9With the remote start feature, the Remote start will automatically shut Extending the TimeRKE transmitter functions will have off after 10 minutes unless a time To extend the time of the firstan increased range of operation. extension is done. remote start, repeat the steps forHowever, the range may be less While the remote start is active, activating remote start. Remotewhile the vehicle is running. the parking lamps will turn on and start can only be extended oneOther conditions can affect the remain on. time between driving.performance of the transmitter. After entering the vehicle during aSee Remote Keyless Entry (RKE) Canceling Remote StartSystem on page 2‑3 for additional remote start, press the POWER O To cancel a remote start, do any ofinformation. button on the center stack with the the following: brake pedal applied to operate asActivating the Remote Start normal. . Aim the RKE transmitter at theTo heat or cool the passenger The remote start can be initiated vehicle and press and hold Bcompartment using remote start: two separate times between until the parking lamps turn off.1. Aim the RKE transmitter at the driving. For each remote start, the . Turn on the hazard warning vehicle. passenger compartment will be flashers. heated or cooled for 10 minutes.2. Press Q on the RKE transmitter; . Press the POWER O button on the doors will lock. the center stack, with the brake pedal applied, then press the3. Within five seconds press and POWER O button again to turn hold B until the turn signal the vehicle off. lamps flash or for approximately four seconds. Pressing B again during a remote start will turn the feature off.

2-10 Keys, Doors and WindowsConditions in Which Remote Door Locks WARNING (Continued)Start May Not WorkConditions in which a remote start { WARNING . Young children who get intomay not occur include: unlocked vehicles may be Unlocked doors can be unable to get out. A child can. An open hood. dangerous. be overcome by extreme heat. Vehicle propulsion system . Passengers, especially and can suffer permanent fault conditions, including an children, can easily open the injuries or even death from emission control system doors and fall out of a moving heat stroke. Always lock the malfunction. vehicle. The chance of being vehicle whenever leaving it.. High voltage battery fault thrown out of the vehicle in . Outsiders can easily enter conditions. a crash is increased if the through an unlocked doorA second remote start or extension doors are not locked. So, all when slowing or stoppingwill not occur if the fuel level is low. passengers should wear the vehicle. Lock the doors safety belts properly andDuring a remote start, conditions to help prevent this from the doors should be lockedin which a remote start may be happening. whenever the vehicle iscanceled include: driven.. Vehicle propulsion system (Continued) To lock or unlock the door, use or high voltage battery fault the Remote Keyless Entry (RKE) conditions. transmitter or the key from outside the vehicle. Use the door lock knob. Low engine oil pressure. or switch from inside the vehicle.. Engine coolant temperature that is too high.

Keys, Doors and Windows 2-11Power Door Locks Delayed Locking Automatic Door Locks This vehicle may have a delayed Automatic Door Lock locking feature. If delayed locking is enabled, a chime will sound to The doors are programmed to indicate a door or hatch is open automatically lock when the shift when the doors are locked with the lever is moved out of P (Park). power door lock switch. The doors The automatic door lock feature will automatically lock and the cannot be disabled. theft-deterrent system will arm after all doors are closed and Automatic Door Unlock five seconds have passed. Press The doors can be programmed the lock button again to make the to automatically unlock when the doors lock immediately. Press the shift lever is moved into P (Park). unlock switch to cancel the delayed See “Power Door Locks” in VehicleThe power door lock switches are lock operation. To enable this Personalization on page 5‑53.on the center stack. feature, see “Power Door Locks” in Vehicle Personalization on Lockout ProtectionQ (Lock): Press to lock the doors. page 5‑53. To arm and disarm theK (Unlock): Press to unlock the theft-deterrent system, see Anti-theft If the power door lock switch isdoors. Alarm System on page 2‑13. pressed when the driver door is open and the vehicle is on, all the doors will lock and then the driver door will unlock. This feature can also be enabled to function when the vehicle is off. To enable this feature, see “Unlocked Door Anti Lock Out” in Vehicle Personalization on page 5‑53.

2-12 Keys, Doors and WindowsSafety Locks Doors WARNING (Continued) Hatch If the vehicle must be driven in Extended Range Mode with the { WARNING hatch open: . Do not operate in Mountain Exhaust gases can enter the Mode if driving with the vehicle if it is driven in Extended hatch open. Range Mode with the hatch open, or with any objects . Close all of the windows. that pass through the seal . Fully open the air outlets on between the body and the hatch. the instrument panel. Engine exhaust contains Carbon . Adjust the Climate Control Monoxide (CO) which cannot be system to a setting thatThe rear door safety locks prevent seen or smelled. It can cause brings in only outside airpassengers from opening the rear unconsciousness and even death. and set the fan speeddoors from inside the vehicle. (Continued) to the highest setting.Press o { to activate the rear door See Automatic Climatesafety locks. The LED light (A) Control System on page 8‑1.comes on when activated. For more information aboutPress o { again to deactivate the carbon monoxide, see Enginesafety locks. Exhaust on page 9‑30.

Keys, Doors and Windows 2-13 Vehicle Security This vehicle has theft-deterrent features; however, they do not make it impossible to steal. Anti-theft Alarm System This vehicle has an anti-theft alarm system. Arming the System To arm the system, close all of theTo open the hatch, with all doors Use the inside pull handle to lower windows and doors and then:unlocked, press the button on the and close the hatch.underside of the hatch and lift up. . Press Q on the RKE transmitter. Always close the hatch before driving. Do not press the button . Or, lock the vehicle using the while closing the hatch; it will unlock power door lock switch in the again. center stack if Unlocked Door Anti Lock Out is turned off. See “Unlocked Door Anti Lock Out” under Vehicle Personalization on page 5‑53 for more information. The alarm automatically arms after about 30 seconds.

2-14 Keys, Doors and WindowsPressing Q on the RKE transmitter Charge Cord Theft Alert Immobilizer Operationa second time will bypass the To arm or disarm the charge cord This vehicle has a passive30-second delay and immediately theft alert, lock or unlock the vehicle theft-deterrent system.arm the system. with the RKE transmitter. The system does not have to beDisarming the System If there is an attempt to remove manually armed or disarmed. the charge cord while the vehicle The vehicle is automaticallyTo disarm the system, press K on is locked, the system alarm will be immobilized when the vehiclethe RKE transmitter. activated. To turn off the system is turned off.Turning off the System Alarm alarm, press K on the RKE The system is automatically transmitter. disarmed when the vehicle isIf there is an attempt to open thedoors, hatch, or hood without first started with a valid RKE transmitter Immobilizer in the vehicle. The RKE transmitterpressing K on the RKE transmitter, See Radio Frequency uses electronic coding that matchesthe system alarm will be activated. Statement on page 13‑28 for an immobilizer control unit inThe exterior lamps will flash and information regarding Part 15 the vehicle and automaticallythe horn will sound for about of the Federal Communications disarms the system. Only a30 seconds. Commission (FCC) rules and correct transmitter can beTo turn off the system alarm: Industry Canada Standards used to turn the vehicle on.. Press K on the RKE transmitter. RSS-210/220/310.. Or, start the vehicle by pressing POWER O on the center stack with the brake pedal applied and the RKE transmitter in the vehicle.

Keys, Doors and Windows 2-15 Exterior Mirrors Power Mirrors Convex Mirrors { WARNINGThe security light in the instrument A convex mirror can make things,cluster comes on if there is a like other vehicles, look fartherproblem with arming or disarmingthe theft-deterrent system. away than they really are. If you cut too sharply into the right lane,When trying to start the vehicle, the you could hit a vehicle on thesecurity light comes on briefly when right. Check the inside mirror orthe vehicle is turned on. glance over your shoulder beforeIf the vehicle does not start and the changing lanes.security light stays on, there is a Controls for the outside powerproblem with the system. Attempt to mirrors are on the driver door. The passenger side mirror is convexturn the vehicle off and try it again. To adjust a mirror: shaped. A convex mirrors surface isDo not leave the RKE transmitter in curved so more can be seen from 1. Move the selector switch tothe vehicle. the driver seat. L (left) or R (right) to choose the driver or passenger mirror. 2. Press the arrows on the control pad to move each mirror in the desired direction. 3. Return the selector switch to the center position.

2-16 Keys, Doors and WindowsFolding Mirrors Interior Mirrors WindowsManual Foldaway MirrorsThe mirrors can be folded inward Automatic Dimming { WARNINGtoward the vehicle to prevent Rearview Mirror Leaving children, helplessdamage when going through an The vehicle has an automatic adults, or pets in a vehicleautomatic car wash. Push the dimming inside rearview mirror. with the windows closed ismirror outward to return it to the Automatic dimming reduces the dangerous. They can beoriginal position. glare from the headlamps of the overcome by the extreme heat vehicle behind you. The dimming and suffer permanent injuriesHeated Mirrors feature and the indicator light come or even death from heat stroke. on each time the vehicle is started.The vehicle may have heated Never leave a child, a helpless Hold the mirror in the center tomirrors. adult, or a pet alone in a vehicle, adjust it.= (Rear Window Defogger): especially with the windowsPress to heat the outside rearview Cleaning the Mirror closed in warm or hot weather.mirrors. See “Rear Window Do not spray glass cleaner directlyDefogger” under Automatic Climate on the mirror. Use a soft towelControl System on page 8‑1 for dampened with water.more information.

Keys, Doors and Windows 2-17 Power Windows { WARNING Leaving children in a vehicle with the RKE transmitter is dangerous for many reasons; children or others could be badly injured or even killed. They could operate the power windows or other controls or even make the vehicle move. The windows willThe vehicle aerodynamics are function with the RKE transmitter The window switches on the driverdesigned to improve fuel economy in the vehicle and they could be door control all windows in theperformance. This may result in seriously injured or killed if caught vehicle. Each passenger doora pulsing sound when either rear in the path of a closing window. has a switch that controls onlywindow is down and the front Do not leave the RKE transmitter that window.windows are up. To reduce the Press the front of the switch to open in a vehicle with children.sound, open either a front window the window. Pull the switch up toor the sunroof (if equipped). When there are children in the close it. rear seat, use the window lockout button to prevent unintentional The power windows work when the operation of the windows. vehicle is on, or when Retained Accessory Power (RAP) is active. See Retained Accessory Power (RAP) on page 9‑22.

2-18 Keys, Doors and WindowsExpress‐Down/Up Windows preset factory position. Weather Programming the Power conditions such as severe icing WindowsWindows with an express-down may also cause the window toor up feature allow the window Programming the power windows auto-reverse. The window willto be lowered or raised without may be necessary if the 12-volt return to normal operation once theholding the switch. The driver battery has been disconnected or obstruction or condition is removed.window has express-down and up; discharged.the passenger and rear windows Express Window Anti-Pinch To program the window:have only express-down. Override 1. Close all doors with thePull a window switch up or push In an emergency, the anti-pinch vehicle on, or when Retainedit down all the way, release it, feature can be overridden in a Accessory Power (RAP) isand the window goes up or down supervised mode. Hold the window active. See Retained Accessoryautomatically. Stop the window switch all the way up to the second Power (RAP) on page 9‑22.by pushing or pulling the switch. position. The window will rise for as long as the switch is held. Once 2. Pull the window switch toExpress Window Anti-Pinch completely close the window. the switch is released, the expressFeature Continue to hold the window mode is re-activated.If any object is in the path of the switch two seconds after the In this mode, the window can still window is closed.window when the express-up is close on an object in its path. Useactive, the window will stop at the 3. Repeat for each window. care when using the override mode.obstruction and auto-reverse to a

Keys, Doors and Windows 2-19Window Lockout Sun VisorsThe rear window lockout switch Pull the sun visor down to blockis on the driver door. This feature glare. Detach the sun visor fromprevents the rear passenger the center mount to pivot to the sidewindows from operating, except window, or to extend along the rod,from the driver position. if available.Press o { to activate the rearwindow lockout switch. The LEDlight (A) comes on when activated.Press o { again to deactivate thelockout switch.

2-20 Keys, Doors and Windows 2 NOTES

Seats and Restraints 3-1Seats and Airbag System Airbag System . . . . . . . . . . . . . . . 3-25 Child Restraints Older Children . . . . . . . . . . . . . . . 3-41Restraints Where Are the Airbags? . . . . . 3-27 When Should an Airbag Infants and Young Children . . . . . . . . . . . . . . . . . . . . 3-43 Inflate? . . . . . . . . . . . . . . . . . . . . . 3-28 Child Restraint Systems . . . . . 3-45Head Restraints What Makes an Airbag Where to Put the Restraint . . . 3-47 Head Restraints . . . . . . . . . . . . . . . 3-2 Inflate? . . . . . . . . . . . . . . . . . . . . . 3-30 Lower Anchors and Tethers How Does an Airbag for Children (LATCHFront Seats Restrain? . . . . . . . . . . . . . . . . . . . 3-30 System) . . . . . . . . . . . . . . . . . . . . 3-49 Seat Adjustment . . . . . . . . . . . . . . 3-4 What Will You See after an Replacing LATCH System Reclining Seatbacks . . . . . . . . . . 3-4 Airbag Inflates? . . . . . . . . . . . . 3-31 Parts After a Crash . . . . . . . . . 3-57 Heated Front Seats . . . . . . . . . . . 3-6 Passenger Sensing Securing Child Restraints System . . . . . . . . . . . . . . . . . . . . . 3-33 (Rear Seat) . . . . . . . . . . . . . . . . . 3-57Rear Seats Servicing the Airbag-Equipped Securing Child Restraints Rear Seats . . . . . . . . . . . . . . . . . . . . 3-8 Vehicle . . . . . . . . . . . . . . . . . . . . . 3-38 (Front Passenger Seat) . . . . 3-60Safety Belts Adding Equipment to the Safety Belts . . . . . . . . . . . . . . . . . . 3-10 Airbag-Equipped Vehicle . . . 3-38 How to Wear Safety Belts Airbag System Check . . . . . . . . 3-40 Properly . . . . . . . . . . . . . . . . . . . . 3-13 Replacing Airbag System Lap-Shoulder Belt . . . . . . . . . . . 3-19 Parts after a Crash . . . . . . . . . 3-40 Safety Belt Use During Pregnancy . . . . . . . . . . . . . . . . . . 3-23 Safety Belt Extender . . . . . . . . . 3-23 Safety System Check . . . . . . . . 3-23 Safety Belt Care . . . . . . . . . . . . . 3-24 Replacing Safety Belt System Parts after a Crash . . . . . . . . . 3-24

3-2 Seats and RestraintsHead Restraints Front Seats The vehicles front seats have { WARNING adjustable head restraints in the outboard seating positions.With head restraints that arenot installed and adjustedproperly, there is a greaterchance that occupants will suffera neck/spinal injury in a crash.Do not drive until the headrestraints for all occupants areinstalled and adjusted properly. To raise or lower the head restraint, press the button located on the side of the head restraint and pull up or push the head restraint down and release the button. Adjust the head restraint so that the top of the restraint is at the same height as the top of the occupants head. This position reduces the chance of a neck injury in a crash.

Seats and Restraints 3-3Pull and push on the head restraint To lower the head restraint, pressafter the button is released to make the button, located on the top ofsure that it is locked in place. the seatback, and push the headThe front seat outboard head restraint down. Try to move therestraints are not designed to be head restraint after the button isremoved. released to make sure that it is locked in place.Rear Seats If you are installing a child restraintThe vehicles rear seats have in the rear seat, see “Securing aadjustable head restraints in the Child Restraint Designed for theoutboard seating positions. LATCH System” under Lower Anchors and Tethers for Children The height of the head restraint can (LATCH System) on page 3‑49. be adjusted. Pull the head restraint up to raise it. Try to move the head restraint to make sure that it is locked in place.

3-4 Seats and RestraintsFront Seats To adjust the seat position: Reclining Seatbacks 1. Pull the handle at the front of theSeat Adjustment seat cushion to unlock it. { WARNING 2. Move the seat forward or You can lose control of the rearward and release the handle. vehicle if you try to adjust a manual driver seat while the 3. Try to move the seat back and vehicle is moving. The sudden forth to be sure it is locked in movement could startle and place. confuse you, or make you push a Seat Height Adjuster pedal when you do not want to. Adjust the driver seat only when the vehicle is not moving. { WARNINGYou can lose control of thevehicle if you try to adjust a { WARNINGmanual driver seat while the If either seatback is not locked, itvehicle is moving. The sudden could move forward in a suddenmovement could startle and stop or crash. That could causeconfuse you, or make you push injury to the person sitting there. Move the lever up or down to raise Always push and pull on thea pedal when you do not want to. or lower the seat.Adjust the driver seat only when seatbacks to be sure they arethe vehicle is not moving. locked.

Seats and Restraints 3-5To recline the seatback: { WARNING Sitting in a reclined position when the vehicle is in motion can be dangerous. Even when buckled up, the safety belts cannot do their job when reclined like this. The shoulder belt cannot do its job because it will not be against your body. Instead, it will be in1. Lift the lever. front of you. In a crash, you could2. Move the seatback to the go into it, receiving neck or other Do not have a seatback reclined if desired position, and then injuries. the vehicle is moving. release the lever to lock the The lap belt cannot do its job seatback in place. either. In a crash, the belt could3. Push and pull on the seatback to go up over your abdomen. make sure it is locked. The belt forces would beTo return the seatback to the upright there, not at your pelvic bones.position: This could cause serious internal injuries.1. Lift the lever fully without applying pressure to the For proper protection when the seatback, and the seatback vehicle is in motion, have the returns to the upright position. seatback upright. Then sit well2. Push and pull on the seatback to back in the seat and wear the make sure it is locked. safety belt properly.

3-6 Seats and RestraintsHeated Front Seats Auto Heated Seats { WARNINGIf you cannot feel temperaturechange or pain to the skin, theseat heater may cause burnseven at low temperatures.To reduce the risk of burns,people with such a conditionshould use care when usingthe seat heater, especially forlong periods of time. Do not If available, the controls are on theplace anything on the seat that center stack. To operate, the vehicleinsulates against heat, such must be on. If available, the controls can beas a blanket, cushion, cover, accessed while the vehicle is on byor similar item. This may cause Press M or L to heat the driver pressing the CLIMATE button on thethe seat heater to overheat. or passenger seat cushion and center stack.An overheated seat heater may seatback.cause a burn or may damage Press the button once for the Press the touch screen M AUTO orthe seat. highest setting. With each press L AUTO button. The button color of the button, the heated seat will will change to green when this change to the next lower setting, feature is on. and then the off setting. Three lights indicate the highest setting and one light the lowest.

Seats and Restraints 3-7When the vehicle is on, this feature Remote Start Heated Seats The indicator lights on the heatedwill automatically activate the When it is cold outside, the heated seat buttons do not turn on during aheated seats at the level required seats can be programmed to turn remote start.by the vehicles interior temperature. on automatically during a remote The temperature performance of anThe active high, medium, low, or off vehicle start. Unless the auto unoccupied seat may be reduced.heated seat level will be indicated heated seats feature is available This is normal.by the manual heated seat button and enabled, the heated seats willlights on the center stack. Use the The heated seats will not turn on be canceled when the vehicle is during a remote start unless thetouch screen buttons or the manual turned on. If the vehicle has autoheated seat buttons on the center heated seats feature is enabled in heated seats and the feature is the vehicle personalization menu.stack to turn auto heated seats off. enabled, the seat heating level will See “Remote Start Auto Heat Seats”If the passenger seat is unoccupied, automatically change to the level under Vehicle Personalization onthe auto heated seats feature will required by the vehicles interior page 5‑53 for more information.not activate that seat. temperature when the vehicle isThe auto heated seats feature turned on.can be programmed to always beenabled when the vehicle is on.See “Auto Heated Seats” underVehicle Personalization onpage 5‑53 for more information.

3-8 Seats and RestraintsRear Seats { WARNINGFolding the Seatback A safety belt that is improperly routed, not properly attached, { WARNING or twisted will not provide the protection needed in a crash.If either seatback is not locked, it The person wearing the belt couldcould move forward in a sudden be seriously injured. After raisingstop or crash. That could cause the rear seatback, always checkinjury to the person sitting there. to be sure that the safety beltsAlways push and pull on the are properly routed and attached,seatbacks to be sure they are and are not twisted. A. Safety Belt Guidelocked. B. Safety Belt Storage Clip To fold the seatback down: 1. Remove the safety belt from the Notice: Folding a rear seat with safety belt guide (A) and place it the safety belts still fastened may in the storage clip (B). cause damage to the seat or the safety belts. Always unbuckle the The safety belt should remain safety belts and return them to in the storage clip while the their normal stowed position seatback is in the folded before folding a rear seat. position.

Seats and Restraints 3-92. Pull the seatback release lever To raise the seatback: 2. Raise the seatback and push it to unlock the seatback. rearward to lock it into place. A tab near the lever raises when A tab near the seatback release the seatback is unlocked. lever retracts when the seatback3. Fold the seatback forward. is locked. 3. Push and pull the top of theRaising the Seatback seatback to be sure it is lockedNotice: Damage to the safety belt into position.or rear seat locking mechanism 4. Return the safety belt to thecan occur if the safety belt is safety belt guide after raising thecaught between the rear seatback seatback.and the seat locking mechanism.The safety belt must be out of the Keep the seat in the upright, lockedway when the rear seat is raised position when not in use. A. Seatback Locking Mechanismto the upright, locked position.If the safety belt is damaged, see B. Safety Belt Storage Clipyour dealer and have it replaced. 1. Make sure the safety belt is in the storage clip (B) before raising the seatback. The safety belt should not cross the seatback locking mechanism (A) when raising the seatback.

3-10 Seats and RestraintsSafety Belts { WARNING In most states and in all Canadian provinces, the law requires wearingThis section of the manual safety belts. Here is why:describes how to use safety belts It is extremely dangerous to ride in a cargo area, inside or outside You never know if you will be inproperly. It also describes some of a vehicle. In a collision, people a crash. If you do have a crash,things not to do with safety belts. riding in these areas are more you do not know if it will be a serious one. { WARNING likely to be seriously injured or killed. Do not allow people to ride A few crashes are mild, and some Do not let anyone ride where in any area of your vehicle that crashes can be so serious that even a safety belt cannot be worn is not equipped with seats and buckled up, a person would not properly. In a crash, if you or safety belts. Be sure everyone survive. But most crashes are in your passenger(s) are not in the vehicle is in a seat and between. In many of them, people wearing safety belts, the injuries using a safety belt properly. who buckle up can survive and can be much worse. You can hit sometimes walk away. Without safety belts they could have been things inside the vehicle harder This vehicle has indicators as a badly hurt or killed. or be ejected from the vehicle. reminder to buckle the safety belts. You and your passenger(s) can See Safety Belt Reminders on After more than 40 years of safety be seriously injured or killed. page 5‑18 for additional information. belts in vehicles, the facts are clear. In the same crash, you might In most crashes buckling up does not be, if you are buckled up. matter ... a lot! Always fasten your safety belt, and check that your passenger(s) are restrained properly too.

Seats and Restraints 3-11Why Safety Belts WorkWhen you ride in or on anything,you go as fast as it goes. Put someone on it. Get it up to speed. Then stop the vehicle. The rider does not stop.Take the simplest vehicle. Supposeit is just a seat on wheels.

3-12 Seats and RestraintsThe person keeps going until or the instrument panel... or the safety belts!stopped by something. In a real With safety belts, you slow downvehicle, it could be the windshield... as the vehicle does. You get more time to stop. You stop over more distance, and your strongest bones take the forces. That is why safety belts make such good sense.

Seats and Restraints 3-13Questions and Answers About Q: If I am a good driver, and I How to Wear Safety BeltsSafety Belts never drive far from home, why should I wear safety ProperlyQ: Will I be trapped in the vehicle belts? This section is only for people of after a crash if I am wearing a adult size. safety belt? A: You may be an excellent driver, but if you are in a crash — even Be aware that there are specialA: You could be — whether you one that is not your fault — you things to know about safety are wearing a safety belt or and your passenger(s) can be belts and children. And there are not. But your chance of being hurt. Being a good driver does different rules for smaller children conscious during and after an not protect you from things and infants. If a child will be riding accident, so you can unbuckle beyond your control, such in the vehicle, see Older Children on and get out, is much greater if as bad drivers. page 3‑41 or Infants and Young you are belted. And you can Children on page 3‑43. Follow those unbuckle a safety belt, even if Most accidents occur within 40 km (25 mi) of home. rules for everyones protection. you are upside down. And the greatest number of It is very important for all occupantsQ: If my vehicle has airbags, why serious injuries and deaths to buckle up. Statistics show that should I have to wear safety occur at speeds of less than unbelted people are hurt more often belts? 65 km/h (40 mph). in crashes than those who areA: Airbags are supplemental Safety belts are for everyone. wearing safety belts. systems only; so they work Occupants who are not buckled up with safety belts — not instead can be thrown out of the vehicle in a of them. Whether or not an crash. And they can strike others in airbag is provided, all occupants the vehicle who are wearing safety still have to buckle up to get belts. the most protection. That is true not only in frontal collisions, but especially in side and other collisions.

3-14 Seats and RestraintsFirst, before you or your worn low and snug on the hips, just Q: What is wrong with this?passenger(s) wear a safety belt, touching the thighs. In a crash, thisthere is important information you applies force to the strong pelvicshould know. bones and you would be less likely to slide under the lap belt. If you slid under it, the belt would apply force on your abdomen. This could cause serious or even fatal injuries. The shoulder belt should go over the shoulder and across the chest. These parts of the body are best able to take belt restraining forces. The shoulder belt locks if there is a sudden stop or crash. A: The shoulder belt is too loose. It will not give as much protection this way.Sit up straight and always keepyour feet on the floor in front of you.The lap part of the belt should be

Seats and Restraints 3-15 Q: What is wrong with this? { WARNING { WARNINGYou can be seriously hurt if the You can be seriously hurt if theshoulder belt is too loose. In a lap belt is too loose. In a crash,crash, you would move forward you could slide under the laptoo much, which could increase belt and apply force on yourinjury. The shoulder belt should abdomen. This could causefit snugly against your body. serious or even fatal injuries. The lap belt should be worn low and snug on the hips, just touching the thighs. A: The lap belt is too loose. It will not give nearly as much protection this way.

3-16 Seats and RestraintsQ: What is wrong with this? Q: What is wrong with this? { WARNING You can be seriously injured if the belt is buckled in the wrong place like this. In a crash, the belt would go up over your abdomen. The belt forces would be there, not on the pelvic bones. This could cause serious internal injuries. Always buckle the belt into the buckle nearest you.A: The belt is buckled in the wrong A: The belt is over an armrest. buckle.

Seats and Restraints 3-17 Q: What is wrong with this? { WARNING { WARNINGYou can be seriously injured if the You can be seriously injuredbelt goes over an armrest like if you wear the shoulder beltthis. The belt would be much too under your arm. In a crash, yourhigh. In a crash, you can slide body would move too far forward,under the belt. The belt force which would increase the chancewould then be applied on the of head and neck injury. Also,abdomen, not on the pelvic the belt would apply too muchbones, and that could cause force to the ribs, which are notserious or fatal injuries. Be sure as strong as shoulder bones.the belt goes under the armrests. You could also severely injure internal organs like your liver or A: The shoulder belt is worn under spleen. The shoulder belt should the arm. It should be worn over go over the shoulder and across the shoulder at all times. the chest.

3-18 Seats and RestraintsQ: What is wrong with this? Q: What is wrong with this? { WARNING You can be seriously injured by not wearing the lap-shoulder belt properly. In a crash, you would not be restrained by the shoulder belt. Your body could move too far forward increasing the chance of head and neck injury. You might also slide under the lap belt. The belt force would then be applied right on the abdomen. That couldA: The belt is behind the body. cause serious or fatal injuries. A: The belt is twisted across The shoulder belt should go over the body. the shoulder and across the chest.

Seats and Restraints 3-19 2. Adjust the seat, if the seat is { WARNING adjustable, so you can sit up straight. To see how, see “Seats” You can be seriously injured by a in the Index. twisted belt. In a crash, you would not have the full width of the belt 3. Pick up the latch plate and pull to spread impact forces. If a belt the belt across you. Do not let it is twisted, make it straight so it get twisted. can work properly, or ask your The lap-shoulder belt may lock if dealer to fix it. you pull the belt across you very quickly. If this happens, let the belt go back slightly to unlock it.Lap-Shoulder Belt Then pull the belt across you more slowly. 4. Push the latch plate into theAll seating positions in the vehicle buckle until it clicks.have a lap-shoulder belt. If the shoulder portion of a passenger belt is pulled out Pull up on the latch plate toThe following instructions explain make sure it is secure. If the belthow to wear a lap-shoulder belt all the way, the child restraint locking feature may be engaged. is not long enough, see Safetyproperly. Belt Extender on page 3‑23. If this happens, let the belt go1. If the seat has a safety belt back all the way and start again. Position the release button on guide, and the safety belt is not the buckle so that the safety belt routed through the guide, slide could be quickly unbuckled if the edge of the belt webbing necessary. through the opening on the guide. Be sure the belt is not twisted.

3-20 Seats and Restraints Safety Belt Pretensioners This vehicle has safety belt pretensioners for front outboard occupants. Although the safety belt pretensioners cannot be seen, they are part of the safety belt assembly. They can help tighten the safety belts during the early stages of a moderate to severe frontal, near frontal, or rear crash if the threshold conditions for pretensioner activation are met.5. To make the lap part tight, pull To unlatch the belt, push the button And, if the vehicle has side impact up on the shoulder belt. on the buckle. The belt should airbags, safety belt pretensioners It may be necessary to pull return to its stowed position. can help tighten the safety belts in stitching on the safety belt Before a door is closed, be sure a side crash or a rollover event. through the latch plate to fully the safety belt is out of the way. If a Pretensioners work only once. tighten the lap belt on smaller door is slammed against a safety If the pretensioners activate in a occupants. belt, damage can occur to both the crash, they need to be replaced, safety belt and the vehicle. and other new parts for the vehicles safety belt system may be required. See Replacing Safety Belt System Parts after a Crash on page 3‑24.

Seats and Restraints 3-21Rear Safety Belt Comfort before using the comfort guide.Guides To install a comfort guide to the safety belt:This vehicle may have rear safetybelt comfort guides. If not, theyare available through your dealer.The guides may provide addedsafety belt comfort for older childrenwho have outgrown booster seatsand for some adults. When installedand properly adjusted, the comfortguide positions the belt away fromthe neck and head. 2. Place the guide over the belt,There is one guide, if equipped, for and insert the two edges of theeach outside passenger position belt into the slots of the guide.in the rear seat. When using acomfort guide, remove the safetybelt from the seat‐mounted guide 1. Remove the guide from its storage clip on the interior body trim next to the rear seat.

3-22 Seats and Restraints { WARNING A safety belt that is not properly worn may not provide the protection needed in a crash. The person wearing the belt could be seriously injured. The shoulder belt should go over the shoulder and across the chest. These parts of the body are best able to take belt restraining forces.3. The belt should not be twisted 4. Buckle, position, and release and it should lie flat. The elastic the safety belt as described cord must be under the belt and previously in this section. the guide on top. Make sure that the shoulder belt crosses the shoulder. To remove and store the comfort guide, squeeze the belt edges together so that the safety belt can be removed from the guide. Slide the guide back into its storage clip located on the interior body trim next to the side of the seatback.

Seats and Restraints 3-23Safety Belt Use During The best way to protect the fetus is Safety System Check to protect the mother. When a safetyPregnancy belt is worn properly, it is more likely Now and then, check that theSafety belts work for everyone, that the fetus will not be hurt in a safety belt reminder light, safetyincluding pregnant women. Like all crash. For pregnant women, as for belts, buckles, latch plates,occupants, they are more likely to anyone, the key to making safety retractors, and anchorages arebe seriously injured if they do not belts effective is wearing them working properly. Look for anywear safety belts. properly. other loose or damaged safety belt system parts that might keep a Safety Belt Extender safety belt system from doing its job. See your dealer to have it If the vehicles safety belt will fasten repaired. Torn or frayed safety belts around you, you should use it. may not protect you in a crash. But if a safety belt is not long They can rip apart under impact enough, your dealer will order you forces. If a belt is torn or frayed, an extender. When you go in to get a new one right away. order it, take the heaviest coat you Make sure the safety belt reminder will wear, so the extender will be light is working. See Safety Belt long enough for you. To help avoid Reminders on page 5‑18 for more personal injury, do not let someone information. else use it, and use it only for the Keep safety belts clean and dry. seat it is made to fit. The extenderA pregnant woman should wear See Safety Belt Care on page 3‑24. has been designed for adults.a lap-shoulder belt, and the lap Never use it for securing child seats.portion should be worn as low as To wear it, attach it to the regularpossible, below the rounding, safety belt. For more information,throughout the pregnancy. see the instruction sheet that comes with the extender.

3-24 Seats and RestraintsSafety Belt Care Replacing Safety Belt After a minor crash, replacement of safety belts may not be necessary.Keep belts clean and dry. System Parts after a But the safety belt assemblies that Crash were used during any crash may { WARNING have been stressed or damaged. Do not bleach or dye safety belts. { WARNING See your dealer to have the safety belt assemblies inspected or It may severely weaken them. A crash can damage the safety replaced. In a crash, they might not be able belt system in the vehicle. New parts and repairs may be to provide adequate protection. A damaged safety belt system necessary even if the safety belt Clean safety belts only with mild may not properly protect the system was not being used at the soap and lukewarm water. person using it, resulting in time of the crash. serious injury or even death in Have the safety belt pretensioners a crash. To help make sure the checked if the vehicle has been in a safety belt systems are working crash, or if the airbag readiness light properly after a crash, have them stays on after you start the vehicle inspected and any necessary or while you are driving. See Airbag replacements made as soon as Readiness Light on page 5‑19. possible.

Seats and Restraints 3-25Airbag System All of the airbags in the vehicle will have the word AIRBAG embossed Here are the most important things to know about the airbag system:The vehicle has the following in the trim or on an attached labelairbags: near the deployment opening. { WARNING. A frontal airbag for the driver. For frontal airbags, the word AIRBAG will appear on the middle You can be severely injured or. A frontal airbag for the right front killed in a crash if you are not passenger. part of the steering wheel for the driver and on the instrument panel wearing a safety belt — even if. A knee airbag for the driver. for the right front passenger. the vehicle has airbags. Airbags. A knee airbag for the front are designed to work with safety With knee airbags, the word passenger. belts, but do not replace them. AIRBAG will appear on the lower Also, airbags are not designed to. A seat-mounted side impact portion of the instrument panel. deploy in every crash. In some airbag for the driver. With seat-mounted side impact crashes safety belts are the only. A seat-mounted side impact airbags, the word AIRBAG will restraint. See When Should an airbag for the right front appear on the side of the seatback Airbag Inflate? on page 3‑28. passenger. closest to the door. Wearing a safety belt during a. A roof-rail airbag for the driver With roof-rail airbags, the word crash helps reduce your chance and the passenger seated AIRBAG will appear along the of hitting things inside the vehicle directly behind the driver. headliner or trim. or being ejected from it. Airbags. A roof-rail airbag for the Airbags are designed to supplement are “supplemental restraints” to right front passenger and the the protection provided by safety the safety belts. Everyone in the passenger seated directly belts. Even though todays airbags vehicle should wear a safety belt behind the right front passenger. are also designed to help reduce properly — whether or not there is the risk of injury from the force of an an airbag for that person. inflating bag, all airbags must inflate very quickly to do their job.

3-26 Seats and Restraints { WARNING { WARNINGAirbags inflate with great force, Children who are up against,faster than the blink of an eye. or very close to, any airbagAnyone who is up against, or when it inflates can be seriouslyvery close to, any airbag when it injured or killed. Airbags plus There is an airbag readinessinflates can be seriously injured lap-shoulder belts offer protection light on the instrument cluster,or killed. Do not sit unnecessarily for adults and older children, but which shows the airbag symbol.close to any airbag, as you would not for young children and infants. The system checks the airbagbe if you were sitting on the edge Neither the vehicles safety belt electrical system for malfunctions.of the seat or leaning forward. system nor its airbag system The light tells you if there is anSafety belts help keep you in is designed for them. Young electrical problem. See Airbagposition before and during a children and infants need the Readiness Light on page 5‑19crash. Always wear a safety belt, protection that a child restraint for more information.even with airbags. The driver system can provide. Alwaysshould sit as far back as possible secure children properly inwhile still maintaining control of the vehicle. To read how, seethe vehicle. Older Children on page 3‑41 orOccupants should not lean on or Infants and Young Children onsleep against the door or side page 3‑43.windows in seating positions withseat-mounted side impact airbagsand/or roof-rail airbags.

Seats and Restraints 3-27Where Are the Airbags? The driver knee airbag is below Driver Side Shown, the steering column. The right front Passenger Side SimilarThe driver frontal airbag is in the passenger knee airbag is below the The seat-mounted side impactmiddle of the steering wheel. glove box. airbags for the driver and right front passenger are in the side of theThe right front passenger frontal seatbacks closest to the door.airbag is in the instrument panel onthe passenger side.

3-28 Seats and Restraints WARNING (Continued) When Should an Airbag Inflate? or even death. The path of an Frontal airbags are designed inflating airbag must be kept to inflate in moderate to severe clear. Do not put anything frontal or near frontal crashes between an occupant and an to help reduce the potential for airbag, and do not attach or severe injuries mainly to the drivers put anything on the steering or right front passengers head wheel hub or on or near any and chest. However, they are other airbag covering. only designed to inflate if the Do not use seat accessories impact exceeds a predetermined Driver Side Shown, that block the inflation path of a deployment threshold. Deployment Passenger Side Similar thresholds are used to predict how seat-mounted side impact airbag. severe a crash is likely to be in timeThe roof-rail airbags for the driver, Never secure anything to the roof for the airbags to inflate and helpright front passenger, and second of a vehicle with roof-rail airbags restrain the occupants.row outboard passengers are in the by routing a rope or tie‐downceiling above the side windows. Whether the frontal airbags will through any door or window or should deploy is not based on opening. If you do, the path how fast your vehicle is traveling. { WARNING of an inflating roof-rail airbag It depends largely on what you hit, will be blocked. the direction of the impact, and how If something is between an quickly your vehicle slows down. occupant and an airbag, the airbag might not inflate properly or it might force the object into that person causing severe injury (Continued)

Seats and Restraints 3-29Frontal airbags may inflate Frontal airbags are not intended to The vehicle has seat-mounted sideat different crash speeds. inflate during vehicle rollovers, rear impact airbags and roof-rail airbags.For example: impacts, or in many side impacts. See Airbag System on page 3‑25.. If the vehicle hits a stationary In addition the vehicle has Seat-mounted side impact and object, the airbags could inflate dual‐stage frontal airbags. roof-rail airbags are intended to at a different crash speed than if Dual‐stage airbags adjust the inflate in moderate to severe side the vehicle hits a moving object. restraint according to crash crashes. In addition, these roof‐rail severity. airbags are intended to inflate. If the vehicle hits an object that during a rollover or in a severe deforms, the airbags could Frontal knee airbags are designed frontal impact. Seat-mounted side inflate at a different crash speed to inflate in moderate to severe impact and roof-rail airbags will than if the vehicle hits an object frontal or near frontal impacts inflate if the crash severity is above that does not deform. that exceed a predetermined the systems designed threshold. If the vehicle hits a narrow object deployment threshold. level. The threshold level can vary (like a pole), the airbags could The vehicle has electronic frontal with specific vehicle design. inflate at a different crash speed sensors, which help the sensing Roof-rail airbags are not than if the vehicle hits a wide system distinguish between a intended to inflate in rear impacts. object (like a wall). moderate frontal impact and a A seat‐mounted side impact airbag. If the vehicle goes into an object more severe frontal impact. is intended to deploy on the side at an angle, the airbags could For moderate frontal impacts, of the vehicle that is struck. Both inflate at a different crash speed dual-stage airbags inflate at a roof‐rail airbags will deploy when than if the vehicle goes straight level less than full deployment. either side of the vehicle is struck or into the object. For more severe frontal impacts, if the sensing system predicts that full deployment occurs. the vehicle is about to roll over, orThresholds can also vary with in a severe frontal impact.specific vehicle design.

3-30 Seats and RestraintsIn any particular crash, no one What Makes an Airbag How Does an Airbagcan say whether an airbag shouldhave inflated simply because of Inflate? Restrain?the damage to a vehicle or because In a deployment event, the sensing In moderate to severe frontal orof what the repair costs were. system sends an electrical signal near frontal collisions, even beltedFor frontal airbags, inflation is triggering a release of gas from the occupants can contact the steeringdetermined by what the vehicle hits, inflator. Gas from the inflator fills the wheel or the instrument panel.the angle of the impact, and how airbag causing the bag to break out In moderate to severe sidequickly the vehicle slows down. of the cover and deploy. The inflator, collisions, even belted occupantsFor seat-mounted side impact and the airbag, and related hardware are can contact the inside of theroof-rail airbags, deployment is all part of the airbag module. vehicle.determined by the location and Frontal airbag modules are located Airbags supplement the protectionseverity of the side impact. inside the steering wheel and provided by safety belts. FrontalIn a rollover event, roof‐rail airbag instrument panel. For vehicles airbags with knee airbags distributedeployment is determined by the with knee airbags, there are the force of the impact more evenlydirection of the roll. airbag modules below the steering over the occupants body, stopping column and below the glove box. the occupant more gradually. For vehicles with seat-mounted side Seat-mounted side impact and impact airbags, there are airbag roof-rail airbags distribute the modules in the side of the front force of the impact more evenly seatbacks closest to the door. over the occupants upper body. For vehicles with roof-rail airbags, there are airbag modules in the ceiling of the vehicle, near the side windows that have occupant seating positions.

Seats and Restraints 3-31Rollover capable roof‐rail airbags What Will You See afterare designed to help contain the an Airbag Inflates? { WARNINGhead and chest of occupants inthe outboard seating positions After the frontal airbags and When an airbag inflates, therein the first and second rows. seat-mounted side impact airbags may be dust in the air. This dustThe rollover capable roof‐rail inflate, they quickly deflate, so could cause breathing problemsairbags are designed to help quickly that some people may not for people with a history ofreduce the risk of full or partial even realize an airbag inflated. asthma or other breathing trouble.ejection in rollover events, although Roof-rail airbags may still be at least To avoid this, everyone in theno system can prevent all such partially inflated for some time after vehicle should get out as soonejections. they deploy. Some components of as it is safe to do so. If you haveBut airbags would not help in the airbag module may be hot for breathing problems but cannotmany types of collisions, primarily several minutes. For location of the get out of the vehicle after anbecause the occupants motion airbag modules, see What Makes airbag inflates, then get fresh airis not toward those airbags. See an Airbag Inflate? on page 3‑30. by opening a window or a door.When Should an Airbag Inflate? on The parts of the airbag that come If you experience breathingpage 3‑28 for more information. into contact with you may be warm, problems following an airbag but not too hot to touch. There may deployment, you should seekAirbags should never be regarded be some smoke and dust coming medical attention.as anything more than a supplementto safety belts. from the vents in the deflated airbags. Airbag inflation does not The vehicle has a feature that may prevent the driver from seeing out automatically unlock the doors, turn of the windshield or being able to on the interior lamps and hazard steer the vehicle, nor does it prevent warning flashers, and shut off the people from leaving the vehicle. fuel system after the airbags inflate.

3-32 Seats and RestraintsYou can lock the doors, turn off the In many crashes severe enough to . The vehicle has a crashinterior lamps and hazard warning inflate the airbag, windshields are sensing and diagnostic moduleflashers by using the controls for broken by vehicle deformation. which records informationthose features. Additional windshield breakage after a crash. See Vehicle Data may also occur from the right Recording and Privacy on page 13‑26 and Event Data { WARNING front passenger airbag. Recorders on page 13‑26. . Airbags are designed to inflate A crash severe enough to only once. After an airbag . Let only qualified technicians inflate the airbags may have inflates, you will need some work on the airbag systems. also damaged important functions new parts for the airbag system. Improper service can mean that in the vehicle, such as the fuel If you do not get them, the an airbag system will not work system, brake and steering airbag system will not be there properly. See your dealer for systems, etc. Even if the vehicle to help protect you in another service. appears to be drivable after a crash. A new system will include moderate crash, there may be airbag modules and possibly concealed damage that could other parts. The service manual make it difficult to safely operate for your vehicle covers the need the vehicle. to replace other parts. Use caution if attempting to restart the vehicle after a crash has occurred.

Seats and Restraints 3-33Passenger Sensing The passenger sensing system According to accident statistics, turns off the right front passenger children are safer when properlySystem frontal airbag and the knee airbag secured in a rear seat in a correctThe vehicle has a passenger on the passenger side, under child restraint for their weightsensing system for the right front certain conditions. The driver and size.passenger position. The passenger airbag, the driver knee airbag, the We recommend that children beairbag status indicator will be visible seat-mounted side impact airbags, secured in a rear seat, including:on the overhead console when the and the roof-rail airbags are not an infant or a child riding in avehicle is started. affected by the passenger sensing rear-facing child restraint; a child system. riding in a forward-facing child seat; The passenger sensing system an older child riding in a booster works with sensors that are part seat; and children, who are large of the right front passenger seat. enough, using safety belts. The sensors are designed to detect A label on the sun visor says, the presence of a properly seated “Never put a rear-facing child seat occupant and determine if the right in the front.” This is because the riskThe words ON and OFF are visible front passenger frontal airbag and to the rear-facing child is so great,during the system check. When the passenger knee airbag should be if the airbag deploys.system check is complete, either enabled (may inflate) or not.the word ON or OFF will be visible.See Passenger Airbag StatusIndicator on page 5‑20.

3-34 Seats and Restraints . A right front passenger takes { WARNING WARNING (Continued) his/her weight off of the seat for a period of time.A child in a rear-facing child Secure rear-facing child restraints . Or, if there is a critical problemrestraint can be seriously in a rear seat, even if the with the airbag system or theinjured or killed if the right airbag(s) are off. If you secure a passenger sensing system.front passenger airbag inflates. forward-facing child restraint inThis is because the back of the the right front seat, always move When the passenger sensingrear-facing child restraint would the front passenger seat as far system has turned off the rightbe very close to the inflating back as it will go. It is better to front passenger frontal airbag andairbag. A child in a forward-facing secure the child restraint in a passenger knee airbag, the offchild restraint can be seriously rear seat. indicator will light and stay lit toinjured or killed if the right front remind you that the airbags are off. See Passenger Airbag Statuspassenger airbag inflates and the The passenger sensing system is Indicator on page 5‑20.passenger seat is in a forward designed to turn off the right frontposition. The passenger sensing system is passenger airbag and passenger designed to turn on (may inflate) theEven if the passenger sensing knee airbag if: right front passenger frontal airbagsystem has turned off the right . The right front passenger seat is and passenger knee airbag anytimefront passenger airbag(s), no unoccupied. the system senses that a person ofsystem is fail-safe. No one can adult size is sitting properly in the . The system determines thatguarantee that an airbag will not right front passenger seat. an infant is present in a childdeploy under some unusual restraint. When the passenger sensingcircumstance, even though system has allowed the airbags tothe airbag(s) are turned off. be enabled, the on indicator will light (Continued) and stay lit to remind you that the airbags are active.

Seats and Restraints 3-35For some children, including If the On Indicator is Lit for a 5. If, after reinstalling the childchildren in child restraints, Child Restraint restraint and restarting theand for very small adults, the vehicle, the on indicator ispassenger sensing system may If a child restraint has been installed still lit, turn the vehicle off.or may not turn off the right front and the on indicator is lit: Then slightly recline the vehiclepassenger frontal airbag and 1. Turn the vehicle off. seatback and adjust the seatpassenger knee airbag, depending cushion, if adjustable, to make 2. Remove the child restraint fromupon the person’s seating posture sure that the vehicle seatback the vehicle.and body build. Everyone in the is not pushing the child restraintvehicle who has outgrown child 3. Remove any additional items into the seat cushion.restraints should wear a safety from the seat such as blankets, Also make sure the childbelt properly — whether or not cushions, seat covers, seat restraint is not trapped underthere is an airbag for that person. heaters, or seat massagers. the vehicle head restraint. 4. Reinstall the child restraint If this happens, adjust the head { WARNING following the directions restraint. See Head Restraints provided by the child restraint on page 3‑2. If the airbag readiness light ever manufacturer and refer to comes on and stays on, it means 6. Restart the vehicle. Securing Child Restraints that something may be wrong (Rear Seat) on page 3‑57 or The passenger sensing system with the airbag system. To help Securing Child Restraints (Front may or may not turn off the avoid injury to yourself or others, Passenger Seat) on page 3‑60. airbags for a child in a child have the vehicle serviced right restraint depending upon the away. See Airbag Readiness childs seating posture and body Light on page 5‑19 for more build. It is better to secure a information, including important child restraint in a rear seat. safety information.

3-36 Seats and RestraintsIf the Off Indicator is Lit for an system to detect that person and Additional Factors AffectingAdult-Size Occupant enable the right front passenger System Operation frontal airbag and passenger knee airbag: Safety belts help keep the passenger in position on the 1. Turn the vehicle off. seat during vehicle maneuvers 2. Remove any additional material and braking, which helps the from the seat, such as blankets, passenger sensing system maintain cushions, seat covers, seat the passenger airbag status. heaters, or seat massagers. See “Safety Belts” and “Child Restraints” in the Index for 3. Place the seatback in the fully additional information about the upright position. importance of proper restraint use. 4. Have the person sit upright in A thick layer of additional material, the seat, centered on the seat such as a blanket or cushion, cushion, with legs comfortably or aftermarket equipment suchIf a person of adult size is sitting extended. as seat covers, seat heaters,in the right front passenger seat, 5. Restart the vehicle and have the and seat massagers can affectbut the off indicator is lit, it could be person remain in this position for how well the passenger sensingbecause that person is not sitting two to three minutes after the on system operates. We recommendproperly in the seat. If this happens, indicator is lit. that you not use seat covers oruse the following steps to allow the other aftermarket equipment except when approved by GM for your specific vehicle.

Seats and Restraints 3-37See Adding Equipment to the . Liquid pooled on the seat that The on indicator may be lit ifAirbag-Equipped Vehicle on has not soaked in may make it an object, such as a briefcase,page 3‑38 for more information more likely that the passenger handbag, grocery bag, laptop orabout modifications that can affect sensing system will enable other electronic device, is put onhow the system operates. (turn on) the passenger frontal an unoccupied seat. If this is not airbag and passenger knee desired remove the object fromA wet seat can affect the airbag while a child restraint orperformance of the passenger the seat. child occupant is on the seat.sensing system. Here is how: If the passenger frontal airbag. The passenger sensing system and passenger knee airbag are { WARNING may turn off the passenger turned on, the on indicator will Stowing of articles under the frontal airbag and passenger be lit. passenger seat or between the knee airbag when liquid is If the passenger seat gets wet, dry passenger seat cushion and soaked into the seat. If this the seat immediately. If the airbag seatback may interfere with the happens, the off indicator will readiness light is lit, do not install proper operation of the passenger be lit, and the airbag readiness a child restraint or allow anyone sensing system. light on the instrument panel to occupy the seat. See Airbag will also be lit. Readiness Light on page 5‑19 for important safety information.

3-38 Seats and RestraintsServicing the Adding Equipment to theAirbag-Equipped Vehicle { WARNING Airbag-Equipped VehicleAirbags affect how the vehicle For up to 10 seconds after the Q: Is there anything I might addshould be serviced. There are vehicle is turned off and the to or change about the vehicleparts of the airbag system in 12‐volt battery is disconnected, that could keep the airbagsseveral places around the vehicle. an airbag can still inflate during from working properly?Your dealer and the service manual improper service. You can be injured if you are close to an A: Yes. If you add things thathave information about servicing change the vehicles frame,the vehicle and the airbag system. airbag when it inflates. Avoid bumper system, height, front endTo purchase a service manual, yellow connectors. They are or side sheet metal, they maysee Service Publications Ordering probably part of the airbag keep the airbag system fromInformation on page 13‑12. system. Be sure to follow proper working properly. Changing or service procedures, and make moving any parts of the front sure the person performing work seats, safety belts, the airbag for you is qualified to do so. sensing and diagnostic module, steering wheel, instrument panel, roof-rail airbag modules, ceiling headliner or pillar garnish trim, overhead console, front sensors, side impact sensors, rollover sensor module, or airbag wiring can affect the operation of the airbag system.

Seats and Restraints 3-39In addition, the vehicle has a airbag(s) or prevent the Q: Because I have a disability,passenger sensing system passenger sensing system I have to get my vehiclefor the right front passenger from properly turning off modified. How can I find outposition, which includes sensors the passenger airbag(s). whether this will affect mythat are part of the passenger See Passenger Sensing airbag system?seat. The passenger sensing System on page 3‑33. A: If you have questions,system may not operate properly If you have questions, call Customer Assistance.if the original seat trim is call Customer Assistance. The phone numbers andreplaced with non-GM covers, The phone numbers and addresses for Customerupholstery or trim, or with addresses for Customer Assistance are in Step TwoGM covers, upholstery or Assistance are in Step Two of the Customer Satisfactiontrim designed for a different of the Customer Satisfaction Procedure in this manual.vehicle. Any object, such as Procedure in this manual. See Customer Satisfactionan aftermarket seat heater See Customer Satisfaction Procedure on page 13‑1.or a comfort enhancing pad Procedure on page 13‑1.or device, installed under or on In addition, the dealer and thetop of the seat fabric, could also If the vehicle has rollover service manual have informationinterfere with the operation of roof‐rail airbags, see Different about the location of the airbagthe passenger sensing system. Size Tires and Wheels on sensors, sensing and diagnosticThis could either prevent proper page 10‑65 for additional module, and airbag wiring.deployment of the passenger important information.

3-40 Seats and RestraintsAirbag System Check Replacing Airbag System If an airbag inflates, you will need to replace airbag system parts.The airbag system does not need Parts after a Crash See your dealer for service.regularly scheduled maintenance If the airbag readiness light stays onor replacement. Make sure theairbag readiness light is working. { WARNING after the vehicle is started or comesSee Airbag Readiness Light on A crash can damage the on when you are driving, the airbagpage 5‑19 for more information. airbag systems in the vehicle. system may not work properly. A damaged airbag system Have the vehicle serviced rightNotice: If an airbag covering is away. See Airbag Readiness Lightdamaged, opened, or broken, may not work properly and on page 5‑19 for more information.the airbag may not work properly. may not protect you and yourDo not open or break the airbag passenger(s) in a crash, resultingcoverings. If there are any in serious injury or even death.opened or broken airbag covers, To help make sure the airbaghave the airbag covering and/or systems are working properlyairbag module replaced. For the after a crash, have themlocation of the airbag modules, inspected and any necessarysee What Makes an Airbag replacements made as soonInflate? on page 3‑30. See your as possible.dealer for service.

Seats and Restraints 3-41 . Can proper safety belt fit beChild Restraints The manufacturers instructions that come with the booster seat state the maintained for the length of the weight and height limitations for that trip? If yes, continue. If no,Older Children booster. Use a booster seat with a return to the booster seat. lap-shoulder belt until the child Q: What is the proper way to passes the fit test below: wear safety belts? . Sit all the way back on the seat. A: An older child should wear a Do the knees bend at the seat lap-shoulder belt and get the edge? If yes, continue. If no, additional restraint a shoulder return to the booster seat. belt can provide. The shoulder . Buckle the lap-shoulder belt. belt should not cross the face Does the shoulder belt rest on or neck. The lap belt should the shoulder? If yes, continue. fit snugly below the hips, just If no, try using the rear safety touching the top of the thighs. belt comfort guide. See “Rear This applies belt force to the Safety Belt Comfort Guides” childs pelvic bones in a crash. under Lap-Shoulder Belt on It should never be worn over theOlder children who have outgrown abdomen, which could cause page 3‑19 for more information.booster seats should wear the severe or even fatal internal If the shoulder belt still does notvehicle safety belts. injuries in a crash. rest on the shoulder, then return to the booster seat. Also see “Rear Safety Belt Comfort . Does the lap belt fit low and Guides” under Lap-Shoulder Belt on snug on the hips, touching the page 3‑19. thighs? If yes, continue. If no, return to the booster seat.

3-42 Seats and RestraintsAccording to accident statistics,children and infants are safer WARNING (Continued)when properly restrained in a childrestraint system or infant restraint head and neck injury. The childsystem secured in a rear seating might also slide under the lapposition. belt. The belt force would thenIn a crash, children who are not be applied right on the abdomen.buckled up can strike other people That could cause serious or fatalwho are buckled up, or can be injuries. The shoulder belt shouldthrown out of the vehicle. Older go over the shoulder and acrosschildren need to use safety belts the chest.properly. { WARNING { WARNING Never do this. Never do this. Never allow a child to wear the Never allow two children to wear safety belt with the shoulder belt the same safety belt. The safety behind their back. A child can be belt cannot properly spread the seriously injured by not wearing impact forces. In a crash, the two the lap-shoulder belt properly. children can be crushed together In a crash, the child would not be and seriously injured. A safety restrained by the shoulder belt. belt must be used by only one The child could move too far person at a time. forward increasing the chance of (Continued)

Seats and Restraints 3-43Infants and Young Airbags plus lap‐shoulder belts WARNING (Continued) offer protection for adults and olderChildren children, but not for young childrenEveryone in a vehicle needs and infants. Neither the vehicles 40 km/h (25 mph), a 5.5 kg (12 lb)protection! This includes infants safety belt system nor its airbag infant will suddenly become aand all other children. Neither the system is designed for them. Every 110 kg (240 lb) force on a personsdistance traveled nor the age and time infants and young children ride arms. An infant should besize of the traveler changes the in vehicles, they should have the secured in an appropriateneed, for everyone, to use safety protection provided by appropriate restraint.restraints. In fact, the law in every child restraints.state in the United States and in Children who are not restrainedevery Canadian province says properly can strike other people,children up to some age must be or can be thrown out of the vehicle.restrained while in a vehicle. { WARNING { WARNING Never do this. Children can be seriously injured or strangled if a shoulder belt Never hold an infant or a child is wrapped around their neck while riding in a vehicle. Due to and the safety belt continues to crash forces, an infant or a child tighten. Never leave children will become so heavy it is not unattended in a vehicle and possible to hold it during a crash. never allow children to play For example, in a crash at only with the safety belts. (Continued)

3-44 Seats and Restraints For most basic types of child { WARNING restraints, there are many different models available.Never do this. When purchasing a childChildren who are up against, restraint, be sure it is designedor very close to, any airbag when to be used in a motor vehicle.it inflates can be seriously injured If it is, the restraint will have aor killed. Never put a rear-facing label saying that it meets federalchild restraint in the right front motor vehicle safety standards.seat. Secure a rear-facing child The restraint manufacturersrestraint in a rear seat. It is also instructions that come with thebetter to secure a forward-facing restraint state the weight andchild restraint in a rear seat. If you Q: What are the different types of height limitations for a particularmust secure a forward-facing add-on child restraints? child restraint. In addition, therechild restraint in the right front are many kinds of restraints A: Add-on child restraints, whichseat, always move the front available for children with are purchased by the vehiclepassenger seat as far back special needs. owner, are available in fouras it will go. basic types. Selection of a particular restraint should take into consideration not only the childs weight, height, and age but also whether or not the restraint will be compatible with the motor vehicle in which it will be used.

Seats and Restraints 3-45 Child Restraint Systems { WARNING { WARNINGTo reduce the risk of neck and A young childs hip bones are stillhead injury during a crash, infants so small that the vehicles regularneed complete support. This is safety belt may not remain lowbecause an infants neck is not on the hip bones, as it should.fully developed and its head Instead, it may settle up aroundweighs so much compared with the childs abdomen. In a crash,the rest of its body. In a crash, the belt would apply force on aan infant in a rear-facing child body area that is unprotected byrestraint settles into the restraint, any bony structure. This aloneso the crash forces can be could cause serious or fataldistributed across the strongest injuries. To reduce the risk ofpart of an infants body, the back serious or fatal injuries during (A) Rear‐Facing Infant Seatand shoulders. Infants should a crash, young children should A rear-facing infant seat (A)always be secured in rear-facing always be secured in appropriate provides restraint with the seatingchild restraints. child restraints. surface against the back of the infant. The harness system holds the infant in place and, in a crash, acts to keep the infant positioned in the restraint.

3-46 Seats and Restraints Securing an Add-On Child Restraint in the Vehicle { WARNING A child can be seriously injured or killed in a crash if the child restraint is not properly secured in the vehicle. Secure the child restraint properly in the vehicle using the vehicle safety belt or LATCH system, following the (B) Forward-Facing Child Seat (C) Booster Seats instructions that came with thatA forward-facing child seat (B) A booster seat (C) is a child child restraint and the instructionsprovides restraint for the childs restraint designed to improve the fit in this manual.body with the harness. of the vehicles safety belt system. A booster seat can also help a child To help reduce the chance of to see out the window. injury, the child restraint must be secured in the vehicle. Child restraint systems must be secured in vehicle seats by lap belts or the lap belt portion of a lap-shoulder belt, or by the LATCH system.

Seats and Restraints 3-47See Lower Anchors and Tethers In some areas, Certified Child Where to Put thefor Children (LATCH System) on Passenger Safety Technicianspage 3‑49 for more information. (CPSTs) are available to inspect RestraintChildren can be endangered in a and demonstrate how to correctly According to accident statistics,crash if the child restraint is not use and install child restraints. children and infants are saferproperly secured in the vehicle. In the U.S., refer to the National when properly restrained in a childWhen securing an add-on child Highway Traffic Safety restraint system or infant restraintrestraint, refer to the instructions Administration (NHTSA) website system secured in a rear seatingthat come with the restraint which to locate the nearest child safety position.may be on the restraint itself or in a seat inspection station. For CPST We recommend that children andbooklet, or both, and to this manual. availability in Canada, check with child restraints be secured in a rearThe child restraint instructions Transport Canada or the Provincial seat, including: an infant or a childare important, so if they are not Ministry of Transportation office. riding in a rear-facing child restraint;available, obtain a replacement Securing the Child within the a child riding in a forward-facingcopy from the manufacturer. Child Restraint child seat; an older child riding in aKeep in mind that an unsecured booster seat; and children, who are large enough, using safety belts.child restraint can move around in acollision or sudden stop and injure { WARNING A label on the sun visor says,people in the vehicle. Be sure to A child can be seriously injured “Never put a rear-facing childproperly secure any child restraint in or killed in a crash if the child restraint in the front.” This isthe vehicle — even when no child is is not properly secured in the because the risk to the rear-facingin it. child restraint. Secure the child child is so great, if the airbag properly following the instructions deploys. that came with that child restraint.

3-48 Seats and Restraints Depending on where you place { WARNING WARNING (Continued) the child restraint and the size of the child restraint, you mayA child in a rear-facing child Secure rear-facing child restraints not be able to access adjacentrestraint can be seriously in a rear seat, even if the safety belt assemblies or LATCHinjured or killed if the right airbag(s) are off. If you secure a anchors for additional passengersfront passenger airbag inflates. forward-facing child restraint in or child restraints. Adjacent seatingThis is because the back of the the right front seat, always move positions should not be used if therear-facing child restraint would the front passenger seat as far child restraint prevents access tobe very close to the inflating back as it will go. It is better to or interferes with the routing of theairbag. A child in a forward-facing secure the child restraint in a safety belt.child restraint can be seriously rear seat. Wherever a child restraint isinjured or killed if the right front See Passenger Sensing System installed, be sure to secure thepassenger airbag inflates and the on page 3‑33 for additional child restraint properly.passenger seat is in a forward information.position. Keep in mind that an unsecured child restraint can move around in aEven if the passenger sensing When securing a child restraint in collision or sudden stop and injuresystem has turned off the right a rear seating position, study the people in the vehicle. Be sure tofront passenger airbag(s), no instructions that came with the properly secure any child restraint insystem is fail-safe. No one can child restraint to make sure it is the vehicle — even when no child isguarantee that an airbag will not compatible with this vehicle. in it.deploy under some unusual Child restraints and booster seatscircumstance, even though vary considerably in size, and somethe airbag(s) are turned off. may fit in certain seating positions (Continued) better than others. Always make sure the child restraint is properly secured.

Seats and Restraints 3-49Lower Anchors and a top tether, you must also use Lower Anchors either the lower anchors or theTethers for Children safety belts to properly secure the(LATCH System) child restraint. A child restraint mustThe LATCH system holds a child never be attached using only therestraint during driving or in a crash. top tether and anchor.This system is designed to make In order to use the LATCH systeminstallation of a child restraint easier. in your vehicle, you need aThe LATCH system uses anchors in child restraint that has LATCHthe vehicle and attachments on the attachments. The child restraintchild restraint that are made for use manufacturer will provide you withwith the LATCH system. instructions on how to use the Lower anchors (A) are metal child restraint and its attachments. bars built into the vehicle.Make sure that a LATCH-compatible The following explains how to There are two lower anchors forchild restraint is properly installed attach a child restraint with these each LATCH seating position thatusing the anchors, or use the attachments in the vehicle. will accommodate a child restraintvehicles safety belts to secure the with lower attachments (B).restraint, following the instructions Not all vehicle seating positions orthat came with that restraint, and child restraints have lower anchorsalso the instructions in this manual. and attachments or top tetherWhen installing a child restraint with anchors and attachments.

3-50 Seats and RestraintsTop Tether Anchor The child restraint may have Lower Anchor and Top Tether a single tether (A) or a dual Anchor Locations tether (C). Either will have a single attachment (B) to secure the top tether to the anchor. Some child restraints that have a top tether are designed for use with or without the top tether being attached. Others require the top tether always to be attached. Be sure to read and follow theA top tether (A, C) anchors the instructions for the child restraint.top of the child restraint to thevehicle. A top tether anchor isbuilt into the vehicle. The top tetherattachment (B) on the child restraint Rear Seatconnects to the top tether anchor in I (Top Tether Anchor): Seatingthe vehicle in order to reduce the positions with top tether anchors.forward movement and rotation ofthe child restraint during driving or H (Lower Anchor): Seating positions with two lower anchors.in a crash.

Seats and Restraints 3-51 Do not secure a child restraint in a position without a top tether anchor if a national or local law requires that the top tether be attached, or if the instructions that come with the child restraint say that the top tetherTo assist you in locating the lower must be attached.anchors, each seating position with According to accident statistics,lower anchors has two labels, near children and infants are safer whenthe crease between the seatback Top Tether Anchors properly restrained in a childand the seat cushion. The top tether anchors for outboard restraint system or infant restraint rear seating positions are located system secured in a rear seating on the back of the rear seatback. position. See Where to Put the Be sure to use an anchor located Restraint on page 3‑47 for on the same side of the vehicle as additional information. the seating position where the child restraint will be placed.To assist you in locating the toptether anchors, the top tether anchorsymbol is located near the top tetheranchor.

3-52 Seats and RestraintsSecuring a Child RestraintDesigned for the LATCH { WARNING { WARNINGSystem Do not attach more than one Children can be seriously injured child restraint to a single anchor. or strangled if a shoulder belt { WARNING Attaching more than one child is wrapped around their neck restraint to a single anchor could and the safety belt continues toIf a LATCH-type child restraint is cause the anchor or attachment tighten. Buckle any unused safetynot attached to anchors, the child to come loose or even break belts behind the child restraint sorestraint will not be able to protect during a crash. A child or others children cannot reach them. Pullthe child correctly. In a crash, the could be injured. To reduce the the shoulder belt all the way outchild could be seriously injured risk of serious or fatal injuries of the retractor to set the lock,or killed. Install a LATCH-type during a crash, attach only one if the vehicle has one, after thechild restraint properly using the child restraint per anchor. child restraint has been installed.anchors, or use the vehicle safetybelts to secure the restraint,following the instructions that Notice: Do not let the LATCHcame with the child restraint and attachments rub against thethe instructions in this manual. vehicle’s safety belts. This may damage these parts. If necessary, move buckled safety belts to avoid rubbing the LATCH attachments.

Seats and Restraints 3-53Do not fold the empty rear attachments or the desired 1.3. Attach and tighten the lowerseat with a safety belt buckled. seating position does not have attachments on the childThis could damage the safety lower anchors, secure the child restraint to the lowerbelt or the seat. Unbuckle and restraint with the top tether and anchors.return the safety belt to its the safety belts. Refer to your 2. If the child restraint manufacturerstowed position, before folding child restraint manufacturer recommends that the top tetherthe seat. instructions and the instructions be attached, attach and tightenMake sure to attach the child in this manual. the top tether to the top tetherrestraint at the proper anchor 1.1. Find the lower anchors anchor, if equipped. Refer to thelocation. for the desired seating child restraint instructions andThis system is designed to make position. the following steps:installation of child restraints easier. 1.2. Put the child restraint on 2.1. Find the top tether anchorWhen using lower anchors, do the seat. on the back of the rearnot use the vehicles safety belts. If the head restraint seatback.Instead use the vehicles anchors interferes with the properand child restraint attachments installation of the childto secure the restraints. Some restraint, the head restraintrestraints also use another vehicle may be removed. Seeanchor to secure a top tether. “Head Restraint Removal1. Attach and tighten the lower and Reinstallation” at the attachments to the lower end of this section. anchors. If the child restraint does not have lower

3-54 Seats and Restraints 2.2. Route, attach, and tighten the top tether according to your child restraint instructions and the following instructions: If the position you are using If the rear outboard seating does not have a headrest position you are using has or head restraint, or the an adjustable head restraint headrest or head restraint and you are using a dual has been removed, and tether, route the tether you are using a dual tether, around the head restraint. If the position you are using route the tether over the does not have a headrest seatback. or head restraint, or the headrest or head restraint has been removed, and you are using a single tether, route the tether over the seatback.

Seats and Restraints 3-55 3. Before placing a child in the child restraint, make sure it is securely held in place. To check, grasp the child restraint at the LATCH path and attempt to move it side to side and back and forth. There should be no more than 2.5 cm (1 in) of movementIf the rear outboard seating for proper installation.position you are using Head Restraint Removal andhas an adjustable headrestraint and you are using Reinstallation 2. Press both buttons on thea single tether, raise the The rear outboard head restraints head restraint posts at the samehead restraint and route can be removed if they interfere with time, and pull up on the headthe tether under the head the proper installation of the child restraint.restraint and in between restraint.the head restraint posts. 3. Store the head restraint in the To remove the head restraint: cargo area of the vehicle. 1. Partially fold the seatback forward. See Rear Seats on page 3‑8 for additional information.

3-56 Seats and Restraints4. When the child restraint is To reinstall the head restraint: 2. Push the head restraint down. removed, reinstall the head If necessary, press the height restraint before the seating adjustment release button to position is used. further lower the head restraint. See Head Restraints on { WARNING page 3‑2. With head restraints that are 3. Try to move the head restraint not installed and adjusted to make sure that it is locked in properly, there is a greater place. chance that occupants will suffer a neck/spinal injury in a crash. Do not drive until the head restraints for all occupants are installed and adjusted properly. 1. Insert the head restraint posts into the holes in the top of the seatback. The notches (A) on the posts must face the driver side of the vehicle.

Seats and Restraints 3-57Replacing LATCH System Securing Child Restraints If the child restraint does not have the LATCH system, you will beParts After a Crash (Rear Seat) using the safety belt to secure When securing a child restraint in the child restraint in this position. { WARNING a rear seating position, study the Be sure to follow the instructions instructions that came with the that came with the child restraint. A crash can damage the child restraint to make sure it is Secure the child in the child restraint LATCH system in the vehicle. compatible with this vehicle. when and as the instructions say. A damaged LATCH system may not properly secure the child If the child restraint has the LATCH If more than one child restraint system, see Lower Anchors and needs to be installed in the rear restraint, resulting in serious Tethers for Children (LATCH seat, be sure to read Where to injury or even death in a crash. System) on page 3‑49 for how and Put the Restraint on page 3‑47. To help make sure the LATCH where to install the child restraint 1. Put the child restraint on system is working properly after using LATCH. If a child restraint a crash, see your dealer to have the seat. is secured in the vehicle using a the system inspected and any safety belt and it uses a top tether, If the head restraint interferes necessary replacements made see Lower Anchors and Tethers with the proper installation as soon as possible. for Children (LATCH System) on of the child restraint, the head page 3‑49 for top tether anchor restraint may be removed. locations. See “Head Restraint RemovalIf the vehicle has the LATCH system and Reinstallation” underand it was being used during a Do not secure a child seat in a Lower Anchors and Tethers forcrash, new LATCH system parts position without a top tether anchor Children (LATCH System) onmay be needed. if a national or local law requires page 3‑49.New parts and repairs may be that the top tether be anchored, or ifnecessary even if the LATCH the instructions that come with thesystem was not being used at child restraint say that the top strapthe time of the crash. must be anchored.

3-58 Seats and Restraints2. Remove the safety belt from the guide on the seatback by sliding the webbing through the opening on the guide. Do not secure the child restraint with the safety belt routed through the guide.3. Pick up the latch plate, and run the lap and shoulder portions of the vehicles safety belt through or around the restraint. The child restraint instructions will show you how. 4. Push the latch plate into the 5. Pull the shoulder belt all the way buckle until it clicks. out of the retractor to set the Position the release button on lock. When the retractor lock is the buckle so that the safety belt set, the belt can be tightened but could be quickly unbuckled if not pulled out of the retractor. necessary.

Seats and Restraints 3-59 7. If the child restraint has a top To remove the child restraint, tether, follow the child restraint unbuckle the vehicle safety belt manufacturers instructions and let it return to the stowed regarding the use of the top position. If the top tether is tether. See Lower Anchors and attached to a top tether anchor, Tethers for Children (LATCH disconnect it. If the head restraint System) on page 3‑49 for more was removed, reinstall it before information. the seating position is used. 8. Before placing a child in the See “Head Restraint Removal and child restraint, make sure it is Reinstallation” under Lower Anchors securely held in place. To check, and Tethers for Children (LATCH grasp the child restraint at the System) on page 3‑49 for additional safety belt path and attempt to information on installing the head6. To tighten the belt, push down restraint properly. on the child restraint, pull the move it side to side and back shoulder portion of the belt to and forth. When the child If the seat has a safety belt guide, tighten the lap portion of the belt, restraint is properly installed, return the safety belt into the guide and feed the shoulder belt back there should be no more than on the seatback by sliding the into the retractor. When installing 2.5 cm (1 in) of movement. webbing through the opening a forward-facing child restraint, on the guide. it may be helpful to use your knee to push down on the child restraint as you tighten the belt. Try to pull the belt out of the retractor to make sure the retractor is locked. If the retractor is not locked, repeat Steps 5 and 6.

3-60 Seats and RestraintsSecuring Child Restraints A label on the sun visor says, WARNING (Continued) “Never put a rear-facing child seat(Front Passenger Seat) in the front.” This is because the riskThis vehicle has airbags. A rear to the rear-facing child is so great, Even if the passenger sensingseat is a safer place to secure if the airbag deploys. system has turned off the righta forward-facing child restraint. front passenger airbag(s), no system is fail-safe. No one canSee Where to Put the Restraint onpage 3‑47. { WARNING guarantee that an airbag will A child in a rear-facing child not deploy under some unusualIn addition, the vehicle has a circumstance, even though thepassenger sensing system which restraint can be seriously injured or killed if the right airbag(s) are turned off.is designed to turn off the rightfront passenger frontal airbag front passenger airbag inflates. Secure rear-facing childand passenger knee airbag under This is because the back of the restraints in a rear seat, even ifcertain conditions. See Passenger rear-facing child restraint would the airbag(s) are off. If you secureSensing System on page 3‑33 and be very close to the inflating a forward-facing child restraint inPassenger Airbag Status Indicator airbag. A child in a forward-facing the right front seat, always moveon page 5‑20 for more information, child restraint can be seriously the front passenger seat as farincluding important safety injured or killed if the right front back as it will go. It is better toinformation. passenger airbag inflates and the secure the child restraint in a passenger seat is in a forward rear seat. position. See Passenger Sensing System (Continued) on page 3‑33 for additional information.

Seats and Restraints 3-61If the child restraint has the LATCH You will be using the lap-shouldersystem, see Lower Anchors and belt to secure the child restraint inTethers for Children (LATCH this position. Follow the instructionsSystem) on page 3‑49 for how and that came with the child restraint.where to install the child restraint 1. Move the seat as far back asusing LATCH. If a child restraint is it will go before securing thesecured using a safety belt and forward-facing child restraint.it uses a top tether, see LowerAnchors and Tethers for Children When the passenger sensing(LATCH System) on page 3‑49 system has turned off the rightfor top tether anchor locations. front passenger frontal airbag and passenger knee airbag, theDo not secure a child seat in a off indicator on the passengerposition without a top tether anchor airbag status indicator should 4. Push the latch plate into theif a national or local law requires light and stay lit when you start buckle until it clicks.that the top tether be anchored, or if the vehicle. See Passengerthe instructions that come with the Position the release button on Airbag Status Indicator on the buckle so that the safety beltchild restraint say that the top strap page 5‑20.must be anchored. could be quickly unbuckled if 2. Put the child restraint on necessary.In Canada, the law requires that the seat.forward-facing child restraints havea top tether, and that the tether be 3. Pick up the latch plate, and runattached. the lap and shoulder portions of the vehicles safety belt through or around the restraint. The child restraint instructions will show you how.

3-62 Seats and Restraints 7. Before placing a child in the child restraint, make sure it is securely held in place. To check, grasp the child restraint at the safety belt path and attempt to move it side to side and back and forth. When the child restraint is properly installed, there should be no more than 2.5 cm (1 in) of movement. If the airbags are off, the off indicator in the passenger airbag5. Pull the shoulder belt all the way 6. To tighten the belt, push down status indicator will come on and out of the retractor to set the on the child restraint, pull the stay on when the vehicle is started. lock. When the retractor lock is shoulder portion of the belt to If a child restraint has been installed set, the belt can be tightened but tighten the lap portion of the belt, and the on indicator is lit, see not pulled out of the retractor. and feed the shoulder belt back “If the On Indicator is Lit for a Child into the retractor. When installing Restraint” under Passenger Sensing a forward-facing child restraint, System on page 3‑33 for more it may be helpful to use your information. knee to push down on the child restraint as you tighten the belt. To remove the child restraint, unbuckle the vehicle safety belt and Try to pull the belt out of the let it return to the stowed position. retractor to make sure the retractor is locked. If the retractor is not locked, repeat Steps 5 and 6.

Storage 4-1Storage Storage Glove Box Compartments Open the glove box by lifting up on the lever.Storage Compartments Instrument Panel Storage . . . . 4-1 Instrument Panel Storage Floor Console Storage Glove Box . . . . . . . . . . . . . . . . . . . . 4-1 Floor Console Storage . . . . . . . . 4-1 Umbrella Storage . . . . . . . . . . . . . 4-2Additional Storage Features Cargo Cover . . . . . . . . . . . . . . . . . . 4-2 There is a storage compartment on top of the instrument panel that includes an auxiliary power outlet. Inside is a transmitter slot for the Remote Keyless Entry (RKE) Inside the front of the floor console transmitter. See Remote Keyless is an auxiliary power outlet (C) Entry (RKE) System Operation on and a jack for auxiliary input page 2‑3. devices (B). Cords can be routed in the pass‐thru (A). See Auxiliary Devices on page 7‑38. The console has cupholders and a storage area.

4-2 Storage Umbrella Storage Additional Storage Features Cargo CoverThe rear console has open storagewith an auxiliary power outlet andcupholders. Slide an umbrella into the opening on either the driver or passenger doors. There is a cover for the rear cargo area. Use the four cargo cover loops to hook the cover to the side panels.

Instruments and Controls 5-1 Traction Control SystemInstruments and Battery Gauge (High Voltage) . . . . . . . . . . . . . . . . . . . . 5-16 (TCS)/StabiliTrak® Light . . . . 5-27Controls Fuel Gauge . . . . . . . . . . . . . . . . . . 5-16 Driver Efficiency Gauge . . . . . . 5-17 Engine Coolant Temperature Warning Light . . . . . . . . . . . . . . 5-27 Total Vehicle Range . . . . . . . . . 5-17 Tire Pressure Light . . . . . . . . . . 5-27Instrument Panel Overview Safety Belt Reminders . . . . . . . 5-18 Engine Oil Pressure Light . . . . 5-28 Instrument Panel Overview . . . . 5-4 Airbag Readiness Light . . . . . . 5-19 Low Fuel Warning Light . . . . . . 5-28 Passenger Airbag Status Security Light . . . . . . . . . . . . . . . . 5-29Controls Indicator . . . . . . . . . . . . . . . . . . . . 5-20 High-Beam On Light . . . . . . . . . 5-29 Steering Wheel Adjustment . . . 5-6 Charging System Light Lamps On Reminder . . . . . . . . . 5-29 Steering Wheel Controls . . . . . . 5-6 (12-Volt Battery) . . . . . . . . . . . . 5-21 Cruise Control Light . . . . . . . . . 5-29 Horn . . . . . . . . . . . . . . . . . . . . . . . . . . 5-7 Malfunction Door, Hood, or Hatch Open Windshield Wiper/Washer . . . . . 5-7 Indicator Lamp . . . . . . . . . . . . . 5-21 Light . . . . . . . . . . . . . . . . . . . . . . . 5-30 Power Outlets . . . . . . . . . . . . . . . . . 5-8 Brake System Warning Light . . . . . . . . . . . . . . . . . . . . . . . 5-24 Information DisplaysWarning Lights, Gauges, and Electric Parking Brake Center Stack Display . . . . . . . . 5-31Indicators Light . . . . . . . . . . . . . . . . . . . . . . . 5-25 Power Flows . . . . . . . . . . . . . . . . . 5-31 Warning Lights, Gauges, and Service Electric Parking Brake Charging . . . . . . . . . . . . . . . . . . . . . 5-33 Indicators . . . . . . . . . . . . . . . . . . . . 5-9 Light . . . . . . . . . . . . . . . . . . . . . . . 5-25 Energy Information . . . . . . . . . . 5-41 Instrument Cluster . . . . . . . . . . . . 5-9 Antilock Brake System (ABS) Clock . . . . . . . . . . . . . . . . . . . . . . . . 5-42 Speedometer . . . . . . . . . . . . . . . . 5-15 Warning Light . . . . . . . . . . . . . . 5-26 Driver Information Odometer . . . . . . . . . . . . . . . . . . . . 5-15 Sport Mode Light . . . . . . . . . . . . 5-26 Center (DIC) . . . . . . . . . . . . . . . 5-43 Trip Odometer . . . . . . . . . . . . . . . 5-15 Mountain Mode Light . . . . . . . . 5-26 Compass . . . . . . . . . . . . . . . . . . . . 5-16

5-2 Instruments and ControlsVehicle Messages Ride Control System Vehicle Messages . . . . . . . . . . . 5-45 Messages . . . . . . . . . . . . . . . . . . 5-50 Battery and Charging Airbag System Messages . . . . 5-51 Messages . . . . . . . . . . . . . . . . . . 5-45 Anti-theft Alarm System Brake System Messages . . . . 5-46 Messages . . . . . . . . . . . . . . . . . . 5-51 Cruise Control Messages . . . . 5-46 Service Vehicle Messages . . . 5-51 Door Ajar Messages . . . . . . . . . 5-46 Starting the Vehicle Drive Mode Messages . . . . . . . 5-47 Messages . . . . . . . . . . . . . . . . . . 5-52 Electric Drive Unit Tire Messages . . . . . . . . . . . . . . . 5-52 Messages . . . . . . . . . . . . . . . . . . 5-47 Vehicle Speed Messages . . . . 5-53 Engine Cooling System Washer Fluid Messages . . . . . 5-53 Messages . . . . . . . . . . . . . . . . . . 5-47 Engine Oil Messages . . . . . . . . 5-48 Vehicle Personalization Fuel System Messages . . . . . . 5-48 Vehicle Personalization . . . . . . 5-53 Key and Lock Messages . . . . . 5-48 Universal Remote System Lamp Messages . . . . . . . . . . . . . 5-49 Universal Remote System . . . 5-60 Object Detection System Universal Remote System Messages . . . . . . . . . . . . . . . . . . 5-49 Programming . . . . . . . . . . . . . . . 5-60 Propulsion Power Universal Remote System Messages . . . . . . . . . . . . . . . . . . 5-50 Operation . . . . . . . . . . . . . . . . . . 5-63

Instruments and Controls 5-32 NOTES

5-4 Instruments and ControlsInstrument Panel Overview

Instruments and Controls 5-5A. Air Vents on page 8‑9. H. Light Sensor. See Daytime R. Leaf Button. See Center StackB. Turn and Lane‐Change Lever. Running Lamps (DRL) on Display on page 5‑31. See Turn and Lane-Change page 6‑3. S. DRIVE MODE Button. Signals on page 6‑4. I. Instrument Panel Storage on See Driver Selected Operating Exterior Lamp Controls on page 4‑1. Modes on page 9‑26. page 6‑1. J. Automatic Climate Control T. Power Button on page 9‑18. Pedestrian Friendly Alert on System on page 8‑1. U. Shift Lever. See Electric Drive page 6‑2. K. Driver Information Center (DIC) Unit on page 9‑32.C. Instrument Cluster on page 5‑9. Controls. See Driver Information V. Infotainment on page 7‑2. Center (DIC) on page 5‑43. Driver Information Center (DIC) Navigation System. See Using Display. See Driver Information L. Instrument Panel Illumination the Navigation System on Center (DIC) on page 5‑43. Control on page 6‑5. page 7‑39.D. Windshield Wiper/Washer on M. Data Link Connector (DLC) W. Electric Parking Brake on page 5‑7. (Out of View). See Malfunction page 9‑35. Indicator Lamp on page 5‑21.E. Heated Front Seats on page 3‑6 X. Power Door Locks on (If Equipped). N. Cruise Control on page 9‑40. page 2‑11.F. Center Stack Display on O. Steering Wheel Adjustment on Y. Hazard Warning Flashers on page 5‑31. page 5‑6. page 6‑4.G. Charging Status Indicator. P. Horn on page 5‑7. Z. Glove Box on page 4‑1. See Charging Status Feedback Q. Steering Wheel Controls on on page 9‑52. page 5‑6 (If Equipped).

5-6 Instruments and ControlsControls 3. Pull or push the steering wheel b / g (Push to Talk): For vehicles closer or away from you. with an OnStar, Bluetooth,Steering Wheel 4. Pull the lever (A) up to lock the or navigation system, press steering wheel in place. to interact with those systems.Adjustment See Bluetooth on page 7‑85 and Do not adjust the steering wheel the OnStar Glove Box Kit for more while driving. information. Steering Wheel Controls $ / i (End Call/Mute): Press to silence the vehicle speakers only. Press again to turn the sound on. For vehicles with OnStar or Bluetooth systems, press to reject an incoming call, or to end a current call. _ SRC ^ (Rotary Control): Press _ or ^ to select a radio band or audio source.To adjust the steering wheel: Press _ or ^ to select the next or1. Pull the lever (A) down. previous favorite radio station,2. Move the steering wheel up CD track, DVD track/chapter, or down. or MP3 track. For vehicles with audio steering wheel controls, some audio controls can be adjusted at the steering wheel.

Instruments and Controls 5-7Press SRC to change between Windshield Wiper/Washerradio and CD or DVD.+ x − (Volume): Press + toincrease the volume; press − todecrease the volume.Horn G (Adjustable Interval Wipes):Press near the horn symbols to The windshield wiper lever is on Move the lever up to G forsound the horn. the side of the steering column. adjustable interval wipes, then turnThe Pedestrian Friendly Alert the band up for more frequent wipes With the vehicle on, move theprovides momentary soft‐note or down for less frequent wipes. windshield wiper lever to selecthorn sound. See PedestrianFriendly Alert on page 6‑2 for the wiper speed. 9 (Off): Use to turn the windshieldmore information. 2: Move the lever up to 2 for fast wipers off. wipes. 3 (Mist): For a single wipe, 1: Move the lever up to 1 for slow briefly move the wiper lever down. wipes. For several wipes, hold the wiper lever down.

5-8 Instruments and ControlsClear ice and snow from the wiper Windshield Washer Power Outletsblades before using them. If frozen Pull the windshield wiper lever The accessory power outlets can beto the windshield, carefully loosen or toward you to spray windshield used to plug in electrical equipment,thaw them. Damaged wiper blades washer fluid and activate the wipers. such as a cell phone or MP3 player.should be replaced. See WiperBlade Replacement on page 10‑31. The washer and wipers will continue There are three accessory power until the lever is released or the outlets:Heavy snow or ice can overload the maximum wash time is reached.wipers. If the wiper motor overheats, . Inside the front of the centerthe windshield wipers will stop until When the windshield wiper lever floor console.the motor cools and the wiper is released, additional wipes maycontrol is turned off. See Electrical occur depending on how long . On the rear of the center floorSystem Overload on page 10‑37. the windshield washer had been console. activated. See Washer Fluid on . Inside the instrument panelWipe Parking page 10‑24 for information on storage area.If the vehicle is turned off, while the filling the windshield washer fluid The power outlets supply powerwipers are on 1, 2, or G, they will reservoir. while the vehicle is on, or if thestop immediately. vehicle is in Retained AccessoryIf the windshield wiper lever is then { WARNING Power (RAP). See Retainedmoved to off before the driver door Accessory Power (RAP) on In freezing weather, do not use page 9‑22.is opened or within 10 minutes, the the washer until the windshield iswipers will restart and move to the warmed. Otherwise the washerbase of the windshield. fluid can form ice on theIf the vehicle is turned off during a windshield, blocking your vision.windshield wash, the wipers willstop when they reach the base ofthe windshield.

Instruments and Controls 5-9Remove the cover to access and Warning Lights, When one of the warning lightsreplace when not in use. comes on and stays on whileCertain accessory plugs may Gauges, and driving, or when one of the gauges shows there may be a problem,not be compatible with the Indicators check the section that explains whataccessory power outlet andcould overload vehicle or adapter Warning lights and gauges can to do. Waiting to do repairs can befuses. If a problem is experienced, signal that something is wrong costly and even dangerous.see your dealer. before it becomes serious enough to cause an expensive repair or Instrument ClusterWhen adding electrical equipment, replacement. Paying attention tobe sure to follow the installation the warning lights and gauges The instrument cluster displays ainstructions included with the could prevent injury. preview of information that includesequipment. See Add-On Electrical electric range, charging, odometer,Equipment on page 9‑63. Warning lights come on when there and battery status. This happens could be a problem with a vehicle upon entry when the driver door isNotice: Hanging heavy function. Some warning lights come opened, and following the welcomeequipment from the power on briefly when the propulsion animation, before starting theoutlet can cause damage not system is started to indicate they vehicle.covered by the vehicle warranty. are working.The power outlets are designed A CHARGING OVERRIDE/for accessory power plugs only, Gauges can indicate when there INTERRUPTION OCCURREDsuch as cell phone charge cords. could be a problem with a vehicle message may display on the lower function. Often gauges and warning left of the screen. This indicates that lights work together to indicate a an override of the charge settings problem with the vehicle. by the owner via OnStar has occurred.

5-10 Instruments and ControlsThe following screens may appear,depending on the status. This screen indicates that the This screen indicates that charging charge cord is connected and is active and the estimated charge the charging is complete. completion time is 10:00 a.m.This screen indicates that thecharge cord is not connected.Plug the charge cord in to chargethe vehicle.

Instruments and Controls 5-11This screen indicates that charging This screen indicates that the This screen indicates that theis programmed to be delayed with vehicle is fully charged and the charge cord is connected, but thean estimated completion time of charge cord is not connected. vehicle cannot be charged.7:00 a.m.

5-12 Instruments and Controls Complete Cluster with Enhanced Configuration in Electric Mode

Instruments and Controls 5-13A. Brake System Warning Light on K. Turn and Lane-Change Signals U. Tire Pressure Light on page 5‑24. on page 6‑4. page 5‑27.B. Battery Gauge (High Voltage) L. Compass on page 5‑16. V. Traction Control System (TCS)/ on page 5‑16. M. Speedometer on page 5‑15. StabiliTrak® Light on page 5‑27.C. Fuel Gauge on page 5‑16. N. Cruise Control Light on W. Malfunction Indicator Lamp onD. Service Electric Parking Brake page 5‑29. page 5‑21. Light on page 5‑25. O. Electric Parking Brake Light on X. Odometer on page 5‑15.E. Security Light on page 5‑29. page 5‑25. Y. Lamps On Reminder onF. Engine Coolant Temperature P. Door, Hood, or Hatch Open page 5‑29. Warning Light on page 5‑27. Light on page 5‑30. Z. Sport Mode Light on page 5‑26G. Charging System Light Q. Low Fuel Warning Light on and Mountain Mode Light on (12-Volt Battery) on page 5‑21. page 5‑28. page 5‑26.H. Engine Oil Pressure Light on R. Antilock Brake System (ABS) AA. Driver Information Center (DIC) page 5‑28. Warning Light on page 5‑26. on page 5‑43.I. High-Beam On Light on S. Electric Drive Unit Positions. AB. Total Vehicle Range on page 5‑29. See Electric Drive Unit on page 5‑17.J. Second Row Passenger Safety page 9‑32. AC. Airbag Readiness Light on Belt Reminder Light. See Safety T. Driver Efficiency Gauge on page 5‑19. Belt Reminders on page 5‑18. page 5‑17. AD. Driver Safety Belt Reminder Light. See Safety Belt Reminders on page 5‑18.

5-14 Instruments and ControlsInstrument Cluster Display Choose either the Simple orConfigurations Enhanced Configuration display.There are two instrument clusterdisplay configurations to choosefrom. Press CONFIG located leftof the steering wheel to changethe configuration. See DriverInformation Center (DIC) onpage 5‑43 for more information. Simple Configuration in Extended Range Mode Simple Configuration The Enhanced Configuration in Electric Mode displays the Driver Efficiency Gauge.

Instruments and Controls 5-15 Speedometer The speedometer shows the vehicle speed in both kilometers per hour (km/h) and miles per hour (mph). The DIC menu can be used to change the units. See Driver Information Center (DIC) on page 5‑43.Enhanced Configuration Enhanced Configuration in Electric Mode in Extended Range Mode Odometer The odometer shows how far the vehicle has been driven, in either kilometers or miles. Trip Odometer The trip odometer is within the Driver Information Center. See Driver Information Center (DIC) on page 5‑43 for more information.

5-16 Instruments and ControlsCompass Battery Gauge Fuel GaugeThe vehicle has a compass display (High Voltage)in the instrument cluster abovethe speedometer. The compassreceives its heading and otherinformation from the GlobalPositioning System (GPS) antennaand vehicle speed information.The compass system has automaticcalibration and zone adjustmentfeatures. This indicator displays the fuelAvoid covering the GPS antenna This indicator displays the high level. When this indicator is in thefor long periods of time with objects voltage battery charge level. foreground, the vehicle is operatingthat may interfere with the antennas in Extended Range Mode.ability to receive a satellite signal. When this indicator is displayed in the foreground, the vehicle The number next to the indicatorSee Multi-Band Antenna on displays an estimate of how farpage 7‑18 for the location of the is operating in Electric Mode. The number next to the indicator the vehicle can be driven whilevehicles antenna. The compass in this mode.system is designed to operate for a displays an estimate of how farcertain number of miles or degrees the vehicle can be driven while See Extended Range Mode onof turn before needing a signal from in this mode. page 9‑25.the GPS satellites. The compass See Electric Mode on page 9‑25.system will automatically determinewhen a GPS signal is restored andprovide a heading.

Instruments and Controls 5-17Driver Efficiency Gauge See Driving for Better Energy Total Vehicle Range Efficiency on page 9‑2. accel: If the ball turns yellow and travels above the center of the gauge, acceleration is too aggressive to optimize efficiency. brake: If the ball turns yellow and travels below the center of the gauge, braking is too aggressive to optimize efficiency.This gauge is a guide to driving in Total vehicle range is the remainingan efficient manner by keeping the distance the vehicle can be drivenball green and in the center of the combining the electric range andgauge. The leaves stop spinning fuel range.when the vehicle stops or when the See Driving for Better Energyball travels away from the center of Efficiency on page 9‑2.the gauge.

5-18 Instruments and ControlsSafety Belt Reminders Passenger Safety Belt If the passenger safety belt is Reminder Light buckled, neither the chime norDriver Safety Belt Reminder the light comes on.Light The front passenger safety belt reminder light and chime may turn on if an object is put on the seat such as a briefcase, handbag, grocery bag, laptop, or other electronic device. To turn off When the vehicle is started, this the reminder light and/or chime, light flashes and a chime may come remove the object from the seatWhen the vehicle is started, this on to remind the passenger to or buckle the safety belt.light flashes and a chime may come fasten their safety belt. The lighton to remind the driver to fasten stays on solid until the belt istheir safety belt. The light stays buckled.on solid until the belt is buckled. This cycle may continue severalThis cycle may continue several times if the passenger remainstimes if the driver remains or or becomes unbuckled while thebecomes unbuckled during driving vehicle is moving.while the vehicle is moving.If the driver safety belt is alreadybuckled, neither the light nor thechime comes on.

Instruments and Controls 5-19Second Row Passenger Safety the instrument cluster to alert the Airbag Readiness LightBelt Reminder Light driver that passengers may need to fasten their safety belts. After the This light shows if there is an passenger safety belt is buckled, electrical problem. The system the corresponding safety belt check includes the airbag sensor, symbol in the instrument cluster the pretensioners, the airbag turns green. If a safety belt is not modules, the wiring, and the crash initially buckled, the instrument sensing and diagnostic module. cluster displays a red safety belt For more information on the airbag symbol. While the vehicle is moving, system, see Airbag System onSecond row seating positions if a second row passenger that page 3‑25.monitored for safety belt use was previously buckled becomesare represented by a colored unbuckled, the corresponding safetysymbol indicating safety belt belt symbol will change to flashingstatus. When the vehicle is started, red for several seconds and a chimetwo safety belt symbols come on may sound.and stay on for several seconds in The airbag readiness light comes on and stays on for several seconds when the vehicle is started. Then the light goes out.

5-20 Instruments and ControlsA message may also display in the Passenger Airbag Status Then, after several more seconds,Driver Information Center (DIC). the status indicator will light either Indicator ON or OFF to let you know theSee Airbag System Messages onpage 5‑51 for more information. The vehicle has a passenger status of the right front passenger sensing system. See Passenger frontal airbag and the passenger Sensing System on page 3‑33 knee airbag. { WARNING for important safety information. If the word ON is lit on the The passenger airbag status passenger airbag status indicator, it If the airbag readiness light stays indicator is in the overhead console. means that the right front passenger on after the vehicle is started or comes on while driving, it means frontal airbag and the passenger the airbag system might not be knee airbag are enabled and may working properly. The airbags in inflate. the vehicle might not inflate in a If the word OFF is lit on the airbag crash, or they could even inflate status indicator, it means that the without a crash. To help avoid passenger sensing system has injury, have the vehicle serviced turned off the right front passenger When the vehicle is started, the frontal airbag and the passenger right away. passenger airbag status indicator knee airbag. will light ON and OFF for several seconds as a system check.

Instruments and Controls 5-21If, after several seconds, both Charging System Light Malfunctionstatus indicator lights remain on,or if there are no lights at all, there (12-Volt Battery) Indicator Lampmay be a problem with the lights A computer system called OBD IIor the passenger sensing system. (On-Board Diagnostics-SecondSee your dealer for service. Generation) monitors operation of the fuel, ignition, and emission { WARNING control systems. It ensures that emissions are at acceptable levels If the airbag readiness light ever for the life of the vehicle, helping comes on and stays on, it means The charging system light comes to produce a cleaner environment. that something may be wrong on briefly when the vehicle is in This light comes on when the with the airbag system. To help ON/RUN, as a check to show the vehicle is placed in Service Only avoid injury to yourself or others, light is working. Mode, as a check to show it is have the vehicle serviced right If the light stays on, or comes on working. If it does not, have the away. See Airbag Readiness while driving, there could be a vehicle serviced by your dealer. Light on page 5‑19 for more problem with the electrical charging See Power Button on page 9‑18 information, including important system. Have it checked by your for more information. safety information. dealer. Driving while this light is on could drain the 12‐volt battery. If a short distance must be driven with the light on, be sure to turn off all accessories, such as the radio.

5-22 Instruments and Controls Notice: Modifications made This light comes on during a to the engine, electric drive unit, malfunction in one of two ways: exhaust, intake, or fuel system Light Flashing: A misfire condition of the vehicle or the replacement has been detected. A misfire of the original tires with other increases vehicle emissions and than those of the same Tire could damage the emission controlIf the malfunction indicator lamp Performance Criteria (TPC) system on the vehicle. Diagnosiscomes on and stays on, while the can affect the vehicle emission and service might be required.vehicle is in ON/RUN, this indicates controls and can cause this light to come on. Modifications The following can prevent morethat there is an OBD II problem and to these systems could lead to serious damage to the vehicle:service is required. costly repairs not covered by . Reduce vehicle speed.Malfunctions often are indicated by the vehicle warranty. This couldthe system before any problem is also result in a failure to . Avoid hard accelerations.apparent. Being aware of the light pass a required Emission . Avoid steep uphill grades.can prevent more serious damage Inspection/Maintenanceto the vehicle. This system assists test. See Accessories and If the light continues to flash, whenthe service technician in correctly Modifications on page 10‑4. it is safe to do so, stop the vehicle.diagnosing any malfunction. Find a safe place to park the vehicle. Turn the vehicle off, wait atNotice: If the vehicle is least 10 seconds, and restart thecontinually driven with this light vehicle. If the light is still flashing,on, the emission controls might follow the previous steps and seenot work as well, the vehicle fuel your dealer for service as soon aseconomy might not be as good, possible.and the engine might not runas smoothly. This could lead tocostly repairs that might not becovered by the vehicle warranty.

Instruments and Controls 5-23Light On Steady: An emission . Check that good quality fuel Emissions Inspection andcontrol system malfunction has is used. Poor fuel quality Maintenance Programsbeen detected on the vehicle. causes the engine not to runDiagnosis and service might be as efficiently as designed and Some state and local governmentsrequired. may cause stalling after start-up have or might begin programs or misfiring. These conditions to inspect the emission controlThe following may correct an might go away once the engine equipment on the vehicle. Failure toemission system malfunction: is warmed up. pass this inspection could prevent. Check that the fuel cap is fully getting a vehicle registration. If one or more of these installed. The diagnostic system conditions occurs, change the Here are some things to know to can determine if the fuel cap fuel brand used. It will require at help the vehicle pass an inspection: has been left off or improperly least one full tank of the proper installed. A loose or missing fuel . The vehicle will not pass this fuel to turn the light off. inspection if the malfunction cap allows fuel to evaporate into the atmosphere. A few driving If none of the above have made indicator lamp is on while the trips with the cap properly the light turn off, your dealer can vehicle is in ON/RUN, or if the installed should turn the light off. check the vehicle. The dealer vehicle is placed in Service has the proper test equipment Only Mode and the malfunction. Check that the electrical system and diagnostic tools to fix any indicator lamp does not come is not wet. The system could mechanical or electrical problems on. See your dealer for be wet if the vehicle was that might have developed. assistance in verifying proper driven through a deep puddle of operation of the malfunction water. The condition is usually indicator lamp. corrected when the electrical system dries out. A few driving trips should turn the light off.

5-24 Instruments and Controls. The vehicle will not pass this inspection if the OBD II Brake System Warning If the light comes on and stays on, there is a base brake problem. (On-Board Diagnostic) system Light determines that critical emission control systems have not been The vehicle brake system consists of two hydraulic circuits. { WARNING completely diagnosed by the If one circuit is not working, the The brake system might not be system. The vehicle would remaining circuit can still work to working properly if the brake be considered not ready for stop the vehicle. For normal braking system warning light is on. inspection. This can happen performance, both circuits need to Driving with the brake system if the 12‐volt battery has be working. warning light on can lead to a recently been replaced or if the 12‐volt battery has run If the warning light comes on, there crash. If the light is still on after down. The diagnostic system is a brake problem. Have the brake the vehicle has been pulled off is designed to evaluate critical system inspected right away. the road and carefully stopped, emission control systems during have the vehicle towed for normal driving. This can take service. several days of routine driving. If this has been done and the vehicle still does not pass the inspection for lack of OBD II system readiness, your dealer can prepare the vehicle for This light comes on briefly when inspection. the vehicle is turned on. If it does not come on then, have it fixed so it will be ready to warn if there is a problem.

Instruments and Controls 5-25Electric Parking Brake Service Electric Parking If this light stays on, there is a problem with a system on theLight Brake Light vehicle that is causing the parking brake system to work at a reduced level. The vehicle can still be driven, but should be taken to a dealer as soon as possible. See Electric Parking Brake on page 9‑35 for more information. If a message displays in the Driver InformationThis status light comes on when The Service Electric Parking Brake Center (DIC), see Brake Systemthe parking brake is applied. If the light should come on briefly when Messages on page 5‑46 for morelight flashes and stays on after the the vehicle is in ON/RUN. If it does information.parking brake is released, or while not come on, have it fixed so itdriving, there is a problem with the will be ready to warn if there is aElectric Parking Brake system. problem.If the light does not come on,or remains flashing, see your dealer.See Electric Parking Brake onpage 9‑35 for more information.

5-26 Instruments and ControlsAntilock Brake System If the ABS warning light remains on Sport Mode Light after resetting the system or comes(ABS) Warning Light on again while driving, the vehicle needs service. If the ABS warning light is on, but the regular brake system warning light is not on, the antilock brakes are not working properly, but the regular brakes are still functioning. Have the vehicle serviced right away. If both brake This light comes on when SportThis light should come on briefly lights are on, the vehicle does not Mode is selected. See “Sport Mode”when the vehicle is in ON/RUN. If it have antilock brakes, and there is in Driver Selected Operating Modesdoes not come on, have the vehicle a problem with the regular brakes on page 9‑26 for more information.serviced by your dealer. as well. Have the vehicle towed for service. See Towing the Vehicle on Mountain Mode LightIf the ABS warning light stays onlonger than a few seconds after the page 10‑84.vehicle is in ON/RUN, or comeson and stays on while driving, tryresetting the system. To reset thesystem:1. While driving, pull over when it is safe to do so. This light comes on when Mountain2. Place the vehicle in P (Park). Mode is selected. See “Mountain Mode” in Driver Selected Operating3. Turn the vehicle off. Modes on page 9‑26 for more4. Restart the vehicle. information.

Instruments and Controls 5-27Traction Control System Engine Coolant Tire Pressure Light(TCS)/StabiliTrak® Light Temperature Warning Light For vehicles with the Tire PressureThis light comes on briefly while Monitor System (TPMS), this lightstarting the vehicle. comes on briefly when the vehicle is The engine coolant temperature in ON/RUN. It provides informationIf it does not, have the vehicle warning light comes on briefly when about tire pressures and the TPMS.serviced by your dealer. If the the vehicle is started.system is working normally the When the Light is On Steady If it does not, have the vehicleindicator light then goes off. serviced by your dealer. If the This indicates that one or moreIf the light comes on and stays system is working normally the of the tires are significantlyon while driving, there could be a indicator light then goes off. underinflated.problem with the TCS/StabiliTrak If the light comes on and stays A message in the Driver Informationsystem and the vehicle might need on while driving, the vehicle may Center (DIC) may also display.service. When this warning light is have a problem with the cooling See Tire Messages on page 5‑52on, the TCS/StabiliTrak system is system. Stop and turn off the for more information. Stop as soonoff and does not limit wheel spin. vehicle to avoid damage to the as possible, and inflate the tires toThe light flashes if the system is engine. A warning chime sounds the pressure value shown on theactive and is working to assist the when this light is on. Tire and Loading Information Label.driver with directional control of the See Tires on page 10‑48 for more See Engine Overheating onvehicle in difficult driving conditions. information. page 10‑23 for more information.

5-28 Instruments and ControlsWhen the Light Flashes First and Notice: Lack of proper engine Low Fuel Warning LightThen is On Steady oil maintenance can damage theThis indicates that there may be engine. The repairs would not bea problem with the Tire Pressure covered by the vehicle warranty.Monitor System. The light flashes Always follow the maintenancefor about one minute and stays on schedule for changing engine oil.steady until the vehicle is in OFF.This sequence repeats each timethe vehicle is in ON/RUN. See Tire The low fuel warning light comes onPressure Monitor System on briefly when the vehicle is started.page 10‑55 for more information. This light also comes on when the fuel level is low. When fuel is added,Engine Oil Pressure Light the light should go off. If it does not, The oil pressure light should come on briefly as the vehicle is started. have the vehicle serviced. { WARNING If it does not come on have the Do not keep driving if the oil vehicle serviced by your dealer. pressure is low. The engine can If the light comes on and stays on, it become so hot that it catches means that oil is not flowing through fire. Someone could be burned. the engine properly. The vehicle Check the oil as soon as possible could be low on oil and might and have the vehicle serviced. have some other system problem. See your dealer.

Instruments and Controls 5-29Security Light High-Beam On Light Cruise Control LightThis light comes on briefly when the The high-beam on light comes on The cruise control light comes onvehicle is started. when the high-beam headlamps are when the cruise control is turned onIf the light remains on while driving, in use. and turns green when cruise controlthere is a problem with the security See Headlamp High/Low-Beam is engaged.system. See your dealer for service. Changer on page 6‑2 for more See Cruise Control on page 9‑40 forFor more information, see Vehicle information. more information.Security on page 2‑13. Lamps On Reminder This light comes on when the parking lamps, headlamps, or taillamps are on.

5-30 Instruments and ControlsDoor, Hood, or HatchOpen LightIf a door, hood, or hatch is notcompletely closed, a light comes ontogether with a graphic in the DriverInformation Center (DIC). Hood Open Hatch Open The DIC indicates when a door, the hood, or the hatch is open. The light displays the open area as shaded. The DIC and the light both display when the vehicle is moving. Only the light displays if the vehicle is Door(s) Open stopped.

Instruments and Controls 5-31Information Displays Use the finger pad rather than the Power Flows finger tip to minimize response time. If the controls are not responding, To view the Power Flow screens,Center Stack Display remove the gloves. press the [ button on theThe center stack screen displays center stack and then press theCharging, Power Flow, and Energy Power Flow button at the top ofInformation. See the information that the touch screen. The Power Flowfollows. screens indicate the current system operating condition. The screensThe Climate Control, Infotainment, show the energy flow between theand Vehicle Personalization also engine, electric drive unit, and highdisplay information in this screen. voltage battery. These componentsFor more information on these will be highlighted when they aresystems, see: active.. Automatic Climate Control System on page 8‑1.. Infotainment on page 7‑2.. Vehicle Personalization on To view the Power Flow, Charging, page 5‑53. and Energy Information, pressThe center stack controls only need the [ button on the center stack.a light touch to operate and workbest with bare hands. The controlswill work with most gloves althoughthey may take longer to respond. Battery Power ‐ Battery is active with energy flowing to the wheels.

5-32 Instruments and ControlsBattery Power ‐ Vehicle is stationary Engine Power ‐ Vehicle is stationaryin electric mode and no power is in extended range mode and noflowing to the wheels. power is flowing to the wheels. Regen Power Recovery ‐ Power from the wheels returns to the battery during regenerative braking or coasting.Engine Power ‐ Engine is active Engine and Battery Power ‐ Bothwith energy flowing to the wheels. the engine and battery are active with energy flowing to the wheels.

Instruments and Controls 5-33 Charging Charge Mode Status Programmable Charging This vehicle has three programmable charge modes. To view the current charge mode status in the center stack display, press the [ button on the center stack and then press the ChargingPower Off ‐ No power is flowing to button at the top of the touchthe wheels. screen. The current charge mode status can also be viewed in a temporary pop-up in the center stack display by pressing the charge port door release button on the driver door. The Charge Start and Charge Complete time estimations are also displayed on the screen. These estimations are most Immediately: The vehicle starts accurate when the vehicle is charging as soon as it is connected plugged in and in moderate to an electrical outlet. See Plug-In temperature conditions. Charging on page 9‑49.

5-34 Instruments and Controls departure time for the current day of the week. Charging begins at the start time and is complete by the departure time only if sufficient time is allowed after the charge cord is plugged in. The vehicle uses an internal clock for programmable charging, not the clock in the center stack. Delayed Rate and Departure Time: The vehicle estimates the charging start time based on the utility rate schedule, utility rate preference, and the programmed departure time for the current day of the week. The vehicle will charge during the least expensive rate periods to achieve a full battery charge by the departure time.Delayed Departure Time: The Electrical rate information from thevehicle estimates the charging start utility company for the chargingtime considering the programmed location is required for this mode.

Instruments and Controls 5-35Charge Mode Selection Departure Time Entry Charge Rate SelectionFrom the Charge Mode Status From the Delayed Charge Mode From the Delayed Rate andscreen, press Change Status screen, press Edit to change Departure Time Charge ModeCharge Mode. the departure time for each day of Status screen, press Edit. the week to match your personal schedule.Select one option: Select one of the following:. Immediately upon plug in. . Edit Electric Rate Schedule. 1. Press the day to change.. Delayed based on . Edit Departure Time Schedule. departure time. 2. Press + or − to change the hours See “Departure Time Entry.” and minutes.. Delayed based on electric . Select Charge Rate Preference. rates & departure time. 3. Press + or − to change AM or PM. 4. Press Back to store changes and return to the previous screen.

5-36 Instruments and ControlsCharge Rate Preference Selection . Charge during Mid‐Peak and Electric Rate Plan Selection Off‐Peak Rates: The vehicle willFrom the Departure Time & Rate charge during Off-Peak and/or Electric rates, or cost per unit,Information screen, press Select Mid-Peak rate periods only and may vary based on time, weekday/Charge Rate Preference. will select when to charge to weekend, and season. During the minimize the total cost of the day when the demand for electricity charge. is high, the rates are usually higher and called Peak rates. At night . Charge during Off‐Peak Rates: when the demand for electricity The vehicle will only charge is low, the rates are usually lower during Off-Peak rate periods. and called Off-Peak rates. In some Charging begins at the start time areas, a Mid-Peak rate is offered. and is complete by the departure Contact the utility company to obtain time only if sufficient time is allowed the rate schedule for your area. after the charge cord is plugged The summer and winter start datesPress one of the following options to in. For example, if the vehicle is must be established to use aselect the Charge Rate Preference. plugged in for only one hour prior summer/winter schedule.. Charge during Peak, Mid‐Peak, to the departure time, and the battery is completely discharged, From the Departure Time & Rate and Off‐Peak Rates: The vehicle the vehicle will not be fully charged Information screen, press Edit will charge during any rate by the departure time regardless of Electric Rate Schedule. period and will select when to charge to minimize the total the rate selection. cost of the charge.

Instruments and Controls 5-37 Summer/Winter Schedule Start Electric Rate Schedule Editing Date Entering From the Enter Summer/Winter From the Select Electric Rate Plan Start Dates screen, press Edit screen, press Summer/Winter Summer Schedule or Edit Winter Schedule then press Edit. Schedule. From the Select Electric Rate Plan screen, press Yearly Schedule and then press Edit. 1. Press Summer Start. 2. Press + or − to set the month and day for the start of summer.To edit the Summer/WinterSchedule: 3. Press Winter Start.1. Press Summer/Winter Schedule. 4. Press + or − to set the month and day for the start of winter.2. Press Edit. 5. Press Edit Summer Schedule orTo edit the Yearly Schedule: Edit Winter Schedule to edit the1. Press Yearly Schedule. daily electric rate schedule.2. Press Edit.

5-38 Instruments and Controls Both weekday and weekend Electric Rate Finish Time Editing schedules must be set. The rate From the Edit (Summer, Winter, schedule only applies for a 24-hour or Yearly) Electric Rate Schedule period, starting at 12:00 AM and screen, press Edit next to the row ending at 12:00 AM. There can be to change. five rate changes for each day; not all must be used. The finish times must be consecutive. If a finish time does1. Press Weekday or Weekend. not follow a start time, the error2. Press Edit next to the row to be message displays “An invalid entry changed. was found in the data entered. . Weekdays are Monday Please re‐enter data.” through Friday and use the same rate schedule. . Weekends are Saturday and Sunday and use the same rate schedule.

Instruments and Controls 5-39 Electric Rate Schedule Viewing From the Select Electric Rate Plan screen, press View (Summer, Winter, or Yearly) Schedule.1. Press + or − to adjust the time. Temporary Charge Mode2. Press Peak, Mid-Peak, Override and Cancel or Off-Peak to select the Programmed Delayed Charge electric rate. Modes can be temporarily3. Press the Back button to store overridden to an Immediate changes. Charge Mode for one charge cycle. There are also other waysOnly the finish time can be edited. to temporarily override a DelayedThe start time is automatically Charge Mode. See Plug-Inpopulated in the rate table. Charging on page 9‑49.

5-40 Instruments and ControlsTo temporarily override a Delayed Programmable ChargingCharge Mode from inside the Disabledvehicle:1. Press the charge port door release button on the driver door to view the Charge Mode Status pop-up in the center stack display.2. Press Charge Immediately Upon To cancel the temporary override Plug In. from the Temporary Charge Mode The new Temporary Charge Status screen or pop-up, press Mode Status screen will Cancel Temporary Charge Mode When the Programmable Charging automatically display the on the bottom of the touch screen. system is disabled, the Default revised charge complete time. The vehicle will reinstate the Charge Mode Status screen and programmed delayed charge the pop-up will display “- -:- -” mode settings. for the Charge Complete Time.

Instruments and Controls 5-41The Programmable Charging Energy Usage There are maximum limits to somesystem will be disabled if the of the values that can be displayed.Charge Complete Time cannot When these values are replacedbe confidently estimated. If the with dashes, the value limits haveProgrammable Charging system been reached. To reset theseis consistently disabled, see your values, the high voltage batterydealer for details. will need to be fully recharged. The circle graph also representsEnergy Information the percentage of distance traveled using Electric ModeTo view the Energy Usage, Energy versus Extended Range Mode.Efficiency, and Efficiency Tips, press The Lifetime Fuel Economy is athe [ button on the center stack The Energy Usage screen displays total over the life of the vehicle andand then press the Energy Info information for the total of all the can only be reset by the dealer.button at the top of the touch drive cycles since the last timescreen. the high voltage battery was fully charged. This includes distance traveled in Electric Mode, distance traveled in Extended Range Mode, total distance traveled, total fuel used, and average fuel economy.

5-42 Instruments and Controls Energy Efficiency Efficiency TipsThe Energy Usage informationwill also appear automatically on The Efficiency Tips screen ispower off when Retained Accessory The Energy Efficiency screen is accessed by pressing EfficiencyPower is active. This automatic accessed by pressing Energy Tips from the Energy Usagepop-up can be disabled through Efficiency on the Energy Usage or Energy Efficiency screen.the vehicle personalization. screen. This screen displays the This screen provides a guide onSee “Energy Summary Exit Pop-up” energy efficiency over the drive how to improve energy usage tounder Vehicle Personalization on cycle based on driving style and increase fuel economy and range.page 5‑53. climate settings. Driving in a more efficient manner will result in a Clock higher percentage displayed for driving style. Minimizing the use The clock is in the center stack of the climate control system will display. To set the time, see “Setting result in a higher percentage the Clock” under Configure Menu on displayed for climate setting. page 7‑66 for more information.

Instruments and Controls 5-43Driver Information DIC Controls DIC Menu ItemsCenter (DIC) At the main DIC menu: 1. Turn the SELECT knob to scroll through the possible DIC menus. 2. Press the center of the SELECT knob when a menu item is highlighted to enter that menu. 3. Continue to turn and press the SELECT knob to scroll through and select the available menu items:The Driver Information Center (DIC) } : Trip Adisplay is in the instrument cluster. CONFIG: Press to select either the x : Trip BThe DIC displays information about Simple or Enhanced instrumentthe vehicle. It also displays warning : : Oil Life cluster configuration display.messages if a system problem isdetected. See Vehicle Messages on } BACK: Press to return to the v : Tire Pressurepage 5‑45 for more information. previous screen, exit a screen, { : Vehicle Messages or return to the main menu.DIC Operation and Displays z : Units Press } BACK to minimizeView the DIC displays by pressing the DIC menu display. y : Tutorial Modethe DIC buttons located to theleft of the steering wheel. The DIC SELECT: Press the center of thedisplays trip, fuel, and warning knob to select the highlighted item.messages if a system problem Turn the knob to scroll through theis detected. menu items.

5-44 Instruments and ControlsTrip A and Trip B The oil life must be reset after Vehicle MessagesThe trip displays show fuel used, each oil change. Avoid accidental Turn the SELECT knob to scrollaverage fuel economy, and distance resetting of the Engine Oil Life through any active warningtraveled since the last trip reset. System. It cannot be reset messages. Press SELECT accurately until the next oil change. to review the messages.Reset the trip data by pressing and To reset the Engine Oil Life System,holding the SELECT button when see Engine Oil Life System on Unitseither Trip A or Trip B is displayed. page 10‑15. The system is reset Turn the SELECT knob to changeOil Life when 100% displays. the unit display to METRIC or USThis displays the percentage Tire Pressure when the display is active. Pressof remaining oil life. The lower SELECT to confirm the setting. The display will show a vehicle with This will change the displays onthe percentage, the closer the the approximate pressures of allvehicle is to needing an oil change. the cluster and DIC to either metric four tires. Tire pressure is displayed or English (US) measurements.When the oil life is depleted, the in either kilopascals (kPa) or inCHANGE ENGINE OIL SOON pounds per square inch (psi). Tutorial Modemessage displays. Change the oil If a low or high tire pressure is Select this menu item to view aas soon as possible. Additional detected, a message is displayed screen that explains some of themaintenance is also recommended advising to check the tire pressure unique features of the cluster.in the Maintenance Schedule. in the specified tire. See TireSee Scheduled Maintenance on Tutorial mode is only available when Pressure on page 10‑54 and Tire the vehicle is in P (Park).page 11‑2 and Engine Oil on Messages on page 5‑52 for morepage 10‑12. information. If the tire pressure display shows dashes instead of a value, there may be a problem with the vehicle. See your dealer for service.

Instruments and Controls 5-45Vehicle Messages Battery and Charging CHARGE CORD CONNECTEDMessages displayed in the DIC Messages This message displays when theindicate the status of the vehicle charge cord is connected to the BATTERY SAVER ACTIVE vehicle. The vehicle cannot beor some action that may be neededto correct a condition. Multiple This message displays when the shifted out of P (Park) with themessages may display one after vehicle has detected that the 12-volt charge cord connected.the other. battery voltage has dropped and CHARGE DOOR OPEN vehicle features are being disabled.Messages that do not require The 12-volt battery saver system This message displays when theimmediate action can be starts reducing certain features charge door is open and the vehicleacknowledged and cleared by trying to save the charge of the is shifted out of P (Park).pressing the SELECT knob. 12-volt battery. Turn off unnecessaryThe messages requiring immediate features to allow the battery to LOW BATTERYaction cannot be cleared until that recharge. This message displays whenaction is performed. All messages the 12-volt battery voltage is low.should be taken seriously. Clearing BATTERY TOO COLD, PLUG IN See Battery on page 10‑28 forthe messages does not correct the TO WARM more information.problem. This message displays during SERVICE BATTERY extremely cold temperatures, when the vehicle will not start CHARGING SYSTEM until the high voltage battery is This message displays when there warm enough. is a fault in the 12-volt battery Plug the vehicle in to allow the charging system. Take the vehicle charging system to warm the high to your dealer for service. voltage battery, then the vehicle can be started.

5-46 Instruments and ControlsSERVICE HIGH VOLTAGE SERVICE BRAKE ASSIST Cruise Control MessagesCHARGING SYSTEM This message displays when there CRUISE SET TO XXXThis message displays when there is a problem with the brake boostis a problem with the high voltage assist system. When this message This message displays when thecharging system. See your dealer displays, the brake boost assist cruise control is set and shows thefor service. motor might be heard operating speed it was set to. See Cruise and a pulsation may be felt in the Control on page 9‑40 for moreBrake System Messages brake pedal. Take the vehicle to information. your dealer for service.BRAKE FLUID LOW Door Ajar Messages SERVICE PARKING BRAKEThis message displays when the DOOR(S) OPEN, HOOD OPEN,brake fluid level is low. See Brake This message displays when there is a problem with the parking brake. HATCH OPENFluid on page 10‑26. Take the vehicle to your dealer for A symbol will appear on the displayRELEASE PARKING BRAKE service. showing the area that is open.This message displays if the electric See Door, Hood, or Hatch Open STEP ON BRAKE TOparking brake is on while the vehicle Light on page 5‑30. RELEASE PARK BRAKEis in motion. Release it beforeattempting to drive. See Electric This message displays whenParking Brake on page 9‑35 for attempting to release the electricmore information. parking brake without the brake pedal applied. See Electric Parking Brake on page 9‑35 for more information.

Instruments and Controls 5-47Drive Mode Messages Electric Drive Unit ENGINE OVERHEATED — Messages TURN VEHICLE OFFMOUNTAIN MODE NOTAVAILABLE This message displays and a SHIFT TO PARK continuous chime sounds if theThis message displays when This message displays when engine cooling system reachesin Mountain Mode and the the vehicle should be shifted to unsafe temperatures for operation.mode becomes unavailable. P (Park). This may appear when Stop and turn off the vehicle asSee “Mountain Mode” under attempting to turn off the vehicle soon as it is safe to do so to avoidDriver Selected Operating when it is not in P (Park). severe damage. This messageModes on page 9‑26. clears when the engine has cooled Engine Cooling System to a safe operating temperature.SPORT MODE NOTAVAILABLE Messages ENGINE RUNNING DUE TOThis message displays when in TEMPERATURE ENGINE OVERHEATED —Sport Mode and the mode becomes REDUCE SPEED This message displays when theunavailable. See “Sport Mode” high voltage battery is charged butunder Driver Selected Operating This message displays when the the engine has to come on becauseModes on page 9‑26. engine coolant temperature or of the outside temperature or high engine oil is too hot. Reduce speed voltage battery temperature. and allow the vehicle to cool down.

5-48 Instruments and ControlsEngine Oil Messages Fuel System Messages READY TO REFUELCHANGE ENGINE OIL SOON CLOSE FUEL DOOR This message displays when the fuel system is depressurized andThis message displays when the This message displays when the the vehicle can be refueled.engine oil needs to be changed. fuel door is open and the vehicle isAfter changing the engine oil, moving. TIGHTEN GAS CAPthe Engine Oil Life System must This message displays when thebe reset. See Engine Oil Life ENGINE NOT AVAILABLE fuel cap is not on tight. Tighten theSystem on page 10‑15 and ADD FUEL fuel cap.Driver Information Center (DIC) on This message displays whenpage 5‑43 for information on how the engine is not available due to WAIT TO REFUELto reset the system. See Engine running out of fuel. The vehicle can This message displays when theOil on page 10‑12 and Scheduled continue to be driven in Electric fuel system is pressurized and youMaintenance on page 11‑2 for Mode until the battery is depleted, must to wait to refuel the vehicle.more information. but will have reduced acceleration.OIL PRESSURE LOW — TURN When this message is displayed, Key and Lock Messages refuel the vehicle. See Out of Fuel/VEHICLE OFF Engine Unavailable on page 9‑28. When programming new RemoteThis message displays if low oil Keyless Entry (RKE) transmitters,pressure levels occur. Stop the FUEL LEVEL LOW DIC messages display. See Remotevehicle as soon as safely possible This message displays when the Keyless Entry (RKE) Systemand do not operate it until the cause vehicle is low on fuel. Refuel as Operation on page 2‑3 for moreof the low oil pressure has been soon as possible. information.corrected. Check the oil as soonas possible and have the vehicleserviced by your dealer.

Instruments and Controls 5-49NO REMOTE DETECTED REMINDER: KEY LEFT IN CHECK LAMP or LAMPThis message displays when the VEHICLE FAILURERKE transmitter is not detected This message displays when Depending on the lamp, one ofwhile attempting to start the vehicle. leaving the vehicle with the RKE these messages may display.The transmitter battery may be transmitter still inside. See Bulb Replacement onweak. See “Starting the Vehicle page 10‑34.with a Low Transmitter Battery” REPLACE BATTERY INunder Remote Keyless Entry (RKE) REMOTE KEY TURN SIGNAL ONSystem Operation on page 2‑3 for This message displays when the This message displays if the turnmore information. battery in the RKE transmitter needs signal has been left on. Turn off theNO REMOTE DETECTED, to be replaced. turn signal.PRESS BRAKE TO RESTART SERVICE KEYLESS START Object Detection SystemThis message displays if the RKE SYSTEMtransmitter is no longer detected Messages This message displays when thein the vehicle. Press the brake keyless start system needs service. PARK ASSIST OFFpedal and the POWER O button Take the vehicle to your dealer. This message displays when theto restart the vehicle, or press the park assist system has been turnedPOWER O button without pressing Lamp Messages off. See Ultrasonic Parking Assistthe brake pedal to turn the vehicle on page 9‑43.off. If the vehicle is turned off and AUTOMATIC LIGHT CONTROLa valid transmitter is not available, ON OR OFF SERVICE PARKING ASSISTthe vehicle will not restart. A message will display when the This message displays if there is a automatic light control has been problem with the park assist system. turned on or off. Take the vehicle to your dealer for service.

5-50 Instruments and ControlsPropulsion Power This message can display when Ride Control System driving in mountainous terrainMessages without using Mountain Mode or by MessagesPROPULSION POWER IS not entering Mountain Mode soon LOW TRACTIONREDUCED enough to build a sufficient battery charge reserve before climbing This message displays when theThis message displays when the steep grades. This is normal Antilock Brake System (ABS) ispropulsion power is reduced and operation to protect the high active and is working to assist thecan affect the ability to accelerate. voltage battery. Only if both driver with control of the vehicle inIf this message is on, but there the PROPULSION POWER IS difficult driving conditions.is no reduction in performance, REDUCED message and theproceed to your destination. SERVICE STABILITRAK malfunction indicator lamp areThe performance may be reduced on should the vehicle be taken This message displays whenthe next time the vehicle is driven. to the dealer for service. there is a problem detected withThe vehicle may be driven at a the StabiliTrak system. The vehiclereduced speed while this message While climbing the grade with this is safe to drive, but the StabiliTrakis on, but maximum acceleration message displayed, the vehicle system is not operational.and speed may be reduced. speed may be reduced until the See Electronic Stability ControlIf this message stays on when engine can recover the battery (ESC) on page 9‑39 for informationthe malfunction indicator lamp is state of charge to a normal level. on resetting the system.on, the vehicle should be taken to See “Mountain Mode” under Driveryour dealer for service as soon as Selected Operating Modes onpossible. page 9‑26.

Instruments and Controls 5-51SERVICE TRACTION Anti-theft Alarm System ENGINE NOT AVAILABLECONTROL Messages SERVICE SOONThis message displays when there This message displays when theis a problem detected with the SERVICE THEFT ALARM engine is not available due to aTraction Control System (TCS). This message displays if there is a malfunction that will not allow theThe vehicle is safe to drive, but the problem with the alarm. See your engine to start. The vehicle canTCS is not operational. See Traction dealer for service. continue to be driven in ElectricControl System (TCS) on page 9‑37 Mode until the battery is depleted,for information on resetting the SERVICE THEFT DETERRENT but will have reduced acceleration.system. SYSTEM When this message is displayed, This message displays if there is the vehicle should be taken toAirbag System Messages a problem with the theft-deterrent your dealer for service as soon as system. See your dealer for service. possible. See Out of Fuel/EngineSERVICE AIRBAG Unavailable on page 9‑28.This message displays if there is Service Vehicle Messages SERVICE AC SYSTEMa problem with the airbag system.Take the vehicle to your dealer for ENGINE MAINTENANCE XXX% This message displays if there is aservice. COMPLETE problem with the air conditioning system. Take the vehicle to your This message displays when dealer for service. the Engine Maintenance Mode is running. See “Engine Maintenance SERVICE HEATER SOON Mode” under Maintenance Modes This message displays if there is on page 9‑28. a problem with the heater system. Take the vehicle to your dealer for service.

5-52 Instruments and ControlsSERVICE POWER STEERING PRESS BUTTON AGAIN TO TIRE LOW ADD AIR TO TIREThis message displays if there is a TURN OFF This message displays when theproblem with the power steering This message displays as a pressure in one or more of the tiressystem. Take the vehicle to your reminder to press the POWER O is low.dealer for service. button to turn the vehicle off when This message also displaysSERVICE VEHICLE SOON an attempt is made to turn off the LEFT FRONT, RIGHT FRONT, vehicle while it is in motion. LEFT REAR, or RIGHT REAR toThis message displays if there is a indicate the location of the low tire.problem with the vehicle. Take the Tire Messagesvehicle to your dealer for service. The low tire pressure warningDepending on the severity of a SERVICE TIRE MONITOR light will also come on. See Tirecrash, this message may come Pressure Light on page 5‑27. SYSTEMon along with the airbag readiness If a tire pressure message appearslight. This message displays if there is on the DIC, stop as soon as you a problem with the Tire Pressure can. Inflate the tires by adding airStarting the Vehicle Monitor System (TPMS). See Tire until the tire pressure is equal to Pressure Monitor Operation onMessages the values shown on the Tire and page 10‑57 for more information. Loading Information label. See TiresPRESS BRAKE TO START TIRE LEARNING ACTIVE on page 10‑48, Vehicle Load LimitsVEHICLE on page 9‑14, and Tire Pressure on This message displays when page 10‑54.This message displays when the system is learning new tires.attempting to start the vehicle See Tire Pressure Monitor You can receive more than onewithout first pressing the brake Operation on page 10‑57 for tire pressure message at a time.pedal. more information. The DIC also shows the tire pressure values. See Driver Information Center (DIC) on page 5‑43.

Instruments and Controls 5-53Vehicle Speed Messages Vehicle TUNE/MENU Knob . Press to enter, select, or activateSPEED LIMITED TO XXX Personalization a highlighted menu option.This message displays when the The Vehicle Personalization . Turn to highlight a menu option.vehicle speed is limited. features can be accessed by using either the infotainment controls or . Press to turn a system setting onWasher Fluid Messages the touch screen in the center stack or off. display. See Overview on page 7‑3WASHER FLUID LOW ADD under “Infotainment System” for } BACKFLUID more information. . Press to exit a menu.This message displays when Using the Infotainment . Press to return to a previousthe washer fluid level is low. Controls screen.For information on filling thewasher fluid, see Washer Fluid on Use the CONFIG, TUNE/MENU Submenuspage 10‑24. knob, and } BACK buttons An arrow on the right‐hand edge on the center stack to select of the menu indicates that it has a personalization features. submenu with other options. CONFIG (Configuration): Press to Selecting a Menu Option scroll through the available menus across the top of the touch screen 1. Turn the TUNE/MENU knob to display. highlight the function. 2. Press the TUNE/MENU knob to select the highlighted option. A checkmark next to the option indicates the selected option.

5-54 Instruments and ControlsTurning a Function On or Off Submenus Entering the1. Turn the TUNE/MENU knob to An arrow on the right‐hand edge Personalization Menu highlight the function. of the menu indicates that it has a2. Press the TUNE/MENU knob submenu with other options. to turn the function on or off. Selecting a Menu Option A checkmark next to the function indicates that the function is on. Touch any one of the available menu options on the touch screenUsing the Touch Screen to select the option. A checkmark next to the option indicates theUse the touch screen icons and selected option.menus on the center stack displayto select personalization features. Turning a Function On or Off Press Vehicle menu on the touchw: Touch to scroll up. Touch the screen where the screen.x: Touch to scroll down. available function is listed to turn it The Vehicle menu features may on or off. A checkmark next to the include:Back: Touch Back in the upper function indicates that the functionright corner of the display to return is on. . Climate and Air Qualityto the previous menu. . Comfort and Convenience . Languages . Lighting . Power Door Locks . Remote Locking, Unlocking, Starting . Return to Factory Settings

Instruments and Controls 5-55Climate and Air Quality 3. Select Auto Fan Speed. Remote Start Auto Heat SeatsSelect the Climate and Air Quality 4. Select the fan speed. When on, this feature will turn themenu to display: 5. Press Back to return to the heated seats on when using remote previous menu. start.. Auto Fan Speed To turn the remote start auto heat. Auto Heated Seats Auto Heated Seats seats on or off:. Remote Start Auto Heat Seats When enabled, the auto heated 1. Press the Vehicle menu.. Auto Defog seat buttons on the touch screen will be highlighted. This feature will 2. Select Climate and Air Quality.Auto Fan Speed automatically activate heated seats 3. Turn the remote start auto heatThis feature sets the automatic at the level required by the interior seats feature on or off.fan speed to maintain the desired temperature. The auto heated seats can be turned off by using the 4. Press Back to return to theinterior tempurature. This selection previous menu.is available on vehicles with the heated seat buttons on the centerAutomatic Climate Control system. stack. Auto DefogChoose a blower setting: To turn the auto heated seats on When on and high humidity isHigh: Increased speed. or off: detected, the Climate Control 1. Press the Vehicle menu. system will adjust the outside air,Medium: Moderate speed. air conditioner, or heat to decreaseLow: Reduced speed. 2. Select Climate and Air Quality. fogging. The fan speed mayTo select the auto fan speed: 3. Turn the auto heated seats increase. When high humidity is feature on or off. no longer detected, the system1. Press the Vehicle menu. will return to previous operation. 4. Press Back to return to the2. Select Climate and Air Quality. previous menu.

5-56 Instruments and ControlsTo turn the auto defog on or off: Chime Volume 3. Turn the button chime feature on1. Press the Vehicle menu. This allows the selection of the or off.2. Select Climate and Air Quality. chime volume level to be either 4. Press Back to return to the normal or high. previous menu.3. Turn the auto defog feature on or off. To select the chime volume level: Energy Summary Exit Pop‐up4. Press Back to return to the 1. Press the Vehicle menu. This allows the energy summary previous menu. 2. Select Comfort and exit pop‐up to be turned on or off: Convenience. 1. Press the Vehicle menu.Comfort and Convenience 3. Select Chime Volume. 2. Select Comfort andSelect the Comfort and 4. Select the volume level. Convenience.Convenience menu and thefollowing will be displayed: 5. Press Back to return to the 3. Turn the energy summary exit previous menu. pop‐up feature on or off.. Chime Volume Button Chime 4. Press Back to return to the. Button Chime previous menu.. Energy Summary Exit Pop‐up This allows a tone to be heard when a selection is made using the infotainment system. To turn the button chime on or off: 1. Press the Vehicle menu. 2. Select Comfort and Convenience.

Instruments and Controls 5-57Languages Exit Lighting Vehicle Locator LightsThis allows the selection of a This allows the selection of how This allows the vehicle locator lightslanguage: long the exterior headlamps stay on to be turned on or off. When on, the when leaving the vehicle and it is headlamps, parklamps, taillamps,1. Press the Vehicle menu. dark outside. license plate lamps, and back-up2. Select Languages. lamps will illuminate when K is The available options are:3. Select English, French, . pressed on the RKE transmitter. OFF or Spanish. To turn the vehicle locator lights on . 30 seconds or off:4. Press Back to return to the previous menu. . 1 minute 1. Press the Vehicle menu.Lighting . 2 minutes 2. Select Lighting.Select the Lighting menu and the To select the length of time the 3. Turn the vehicle locator lights onfollowing will be displayed: exterior lamps will remain on: or off.. Exit Lighting 1. Press the Vehicle menu. 4. Press Back to return to the. Vehicle Locator Lights 2. Select Lighting. previous menu. 3. Select Exit Lighting. Power Door Locks 4. Select the length of time the Select Power Door Locks and the exterior lamps will remain on. following will be displayed: 5. Press Back to return to the . Auto Door Unlock previous menu. . Unlocked Door Anti Lock Out . Delayed Door Lock

5-58 Instruments and ControlsAuto Door Unlock Unlocked Door Anti Lock Out To turn the delayed door lockThis allows selection of which doors When on, this feature will keep the feature on or off:will automatically unlock when the driver door from locking until the 1. Press the Vehicle menu.vehicle is shifted into P (Park). door is closed. If this feature is 2. Select Power Door Locks.The available options are: turned on, the Delayed Door Lock menu will not be available. 3. Turn the delayed door lock. All Doors feature on or off. To turn the unlocked door anti lock. Driver Door 4. Press Back to return to the out feature on or off:. OFF previous menu. 1. Press the Vehicle menu.To select how the doors will 2. Select Unlocked Door Anti Remote Locking, Unlocking,automatically unlock: Lock Out. Starting1. Press the Vehicle menu. 3. Turn the unlocked door anti lock Select Remote Locking, Unlocking, out feature on or off. Starting and the following will be2. Select Power Door Locks. displayed:3. Select Auto Door Unlock. 4. Press Back to return to the previous menu. . Remote Lock Feedback4. Select how the doors will Delayed Door Lock . Remote Unlock Light Feedback automatically unlock. When on, this feature will delay the . Door Unlock or Remote Door5. Press Back to return to the locking of the doors. To override the Unlock previous menu. delay, press the power door lock . Remote Left in Vehicle Reminder switch on the center stack.

Instruments and Controls 5-59Remote Lock Feedback Remote Unlock Light Feedback If All Doors is selected, all doors willThis allows selection of what When on, the exterior lamps will be unlocked.feedback is provided when flash when unlocking the vehicle If Driver Door is selected, only theunlocking the vehicle with with the RKE transmitter. driver door will be unlocked on thethe RKE transmitter. To turn the remote unlock light first press of K. All doors will beThe available options are: feedback feature on or off: unlocked on the second press. Lights and Horn 1. Press the Vehicle menu. of K within five seconds of the prior press.. Lights Only 2. Select Remote Locking, Unlocking, Starting. To select how the doors will unlock. Horn Only with the RKE transmitter:. OFF 3. Turn the remote unlock light feedback feature on or off. 1. Press the Vehicle menu.To select the remote lock feedback: 2. Select Remote Locking, 4. Press Back to return to the1. Press the Vehicle menu. previous menu. Unlocking, Starting.2. Select Remote Locking, Door Unlock or Remote Door 3. Select Door Unlock or Remote Unlocking, Starting. Unlock Door Unlock.3. Select Remote Lock Feedback. This allows selection of which doors 4. Select how the doors will unlock.4. Select the remote feedback. will unlock when pressing K on the 5. Press Back to return to the RKE transmitter. previous menu.5. Press Back to return to the previous menu. The available options are: . All Doors . Driver Door

5-60 Instruments and ControlsRemote Left in Vehicle Reminder Universal Remote This system provides a way toWhen on, the horn will chirp rapidly replace up to three remote controlthree times if an RKE transmitter is System transmitters used to activateleft in the vehicle. devices such as garage door See Radio Frequency openers, security systems, andTo turn the remote left in vehicle Statement on page 13‑28 for home automation devices.reminder feature on or off: information regarding Part 15 of the Federal Communications Do not use the Universal Remote1. Press the Vehicle menu. Commission (FCC) rules and system with any garage door opener2. Select Remote Locking, Industry Canada Standards that does not have the stop and Unlocking, Starting. RSS-210/220/310. reverse feature. This includes any garage door opener model3. Turn the remote left in vehicle reminder feature on or off. Universal Remote System manufactured before April 1,1982. Programming Read the instructions completely4. Press Back to return to the before attempting to program previous menu. the Universal Remote system.Return to Factory Settings Because of the steps involved, it may be helpful to have anotherThis returns all of the vehicle person available to assist withpersonalization settings to the programming the Universalfactory settings. Remote system.1. Press the Vehicle menu. If the vehicle has this feature, you2. Select Return to Factory will see these buttons with one Settings. LED indicator next to them in the3. Select Yes or No. overhead console.4. Press Back to return to the previous menu.

Instruments and Controls 5-61Keep the original hand-held Programming the Universal 2. At the same time, presstransmitter for use in other vehicles Remote System and hold both the hand-heldas well as for future Universal transmitter button and oneRemote system programming. For questions or help programming of the three Universal RemoteIt is also recommended that the Universal Remote system, system buttons to be used toupon the sale of the vehicle, the call 1‐800‐355‐3515 or go to operate the garage door. Do notprogrammed Universal Remote www.homelink.com. release the Universal Remotesystem buttons be erased for Programming a garage door opener system button or the hand-heldsecurity purposes. See “Erasing involves time-sensitive actions, so transmitter button until theUniversal Remote System Buttons” read the entire procedure before indicator light changes from alater in this section. starting. Otherwise, the device will slowly to a rapidly flashing light.When programming a garage door, time out and the procedure will have You now may release bothpark outside of the garage. Park to be repeated. buttons.directly in line with and facing the To program up to three devices: Some entry gates and garagegarage door opener motor-head door openers may require 1. Hold the end of the hand-heldor gate motor-head. Be sure that substitution of Step 2 with transmitter about 3 to 8 cmpeople and objects are clear of the procedure noted in “Gate (1 to 3 in) away from thethe garage door or gate being Operator and Canadian Universal Remote systemprogrammed. Programming” later in this buttons while keepingIt is recommended that a new section. the indicator light in view.battery be installed in the hand-held The hand-held transmitter wastransmitter for quicker and more supplied by the manufactureraccurate transmission of the of the garage door openerradio-frequency signal. receiver (motor-head unit).

5-62 Instruments and Controls3. Press and hold for five seconds It may be helpful to have 6. Immediately return to the the newly trained Universal another person assist with vehicle. Firmly press and hold Remote system button (the the remaining Steps 4 for two seconds the Universal button selected in Step 2) while through 6. Remote system button, selected observing the indicator light and in Step 2 to control the garage garage door activation. door, and then release it. If the . If the indicator light stays on garage door does not move or continuously or the garage the lamp on the garage door door starts to move when opener receiver (motor-head the Universal Remote unit) does not flash, press and system button is pressed hold the same button a second and released, then the time for two seconds, and then programming is complete. release it. Again, if the door There is no need to “Learn” or “Smart” Buttons does not move or the garage continue programming door lamp does not flash, press 4. After Steps 1 through 3 have and hold the same button a third Steps 4 through 6. been completed, locate the time for two seconds, and then . If the Universal Remote “Learn” or “Smart” button inside release. system indicator light blinks the garage on the garage door rapidly for two seconds, opener receiver (motor-head The Universal Remote system then turns to a constant unit). The name and color should now activate the light and the garage door of the button may vary by garage door. does not move, continue manufacturer. To program the remaining two with programming Steps 4 5. Firmly press and release the Universal Remote system buttons, through 6. “Learn” or “Smart” button. After begin with Step 1 of “Programming you press this button, you will the Universal Remote System.” have 30 seconds to complete Step 6.

Instruments and Controls 5-63Gate Operator and Canadian If you live in Canada, or you are Universal Remote SystemProgramming having difficulty programming a gate operator or garage door OperationIf you have questions or need help opener by using the “Programmingprogramming the Universal Remote Using the Universal Remote the Universal Remote System” Systemsystem, call 1‐800‐355‐3515 or go procedures, regardless of whereto www.homelink.com. you live, replace Step 2 under Press and hold the appropriateCanadian radio-frequency laws “Programming the Universal Remote Universal Remote systemrequire transmitter signals to time System” with the following: button for at least half of a second.out or quit after several seconds of The indicator light will come on Continue to press and hold while the signal is being transmitted.transmission. This may not be long the Universal Remote systemenough for the Universal Remote button while you press and Erasing Universal Remotesystem to pick up the signal during release every two seconds (cycle)programming. Similarly, some U.S. System Buttons the hand-held transmitter buttongate operators are manufactured to until the frequency signal has All programmed buttons should betime out in the same manner. been successfully accepted by erased when the vehicle is sold or the Universal Remote system. the lease ends. The Universal Remote system To erase all programmed buttons indicator light will flash slowly at on the Universal Remote system first and then rapidly. Proceed with device: Step 3 under “Programming the 1. Press and hold down the Universal Remote System” to two outside buttons until the complete. indicator light begins to flash. This should take about 10 seconds. 2. Release both buttons.

5-64 Instruments and ControlsReprogramming a SingleUniversal Remote SystemButtonTo reprogram any of the threeUniversal Remote system buttons:1. Press and hold the desired Universal Remote system button. Do not release the button.2. The indicator light will begin to flash after 20 seconds. Without releasing the button, proceed with Step 1 of the section “Programming the Universal Remote System.”If you have questions or need helpprogramming the Universal Remotesystem, call 1‐800‐355‐3515 or goto www.homelink.com. You mayalso call the customer assistancephone number under CustomerAssistance Offices on page 13‑3.

Lighting 6-1Lighting Exterior Lighting AUTO (Automatic Headlamps): Turns the exterior lamps on and off automatically depending on the Exterior Lamp Controls exterior light.Exterior Lighting Exterior Lamp Controls . . . . . . . . 6-1 ; (Parking Lamps): Turns on Headlamp High/Low-Beam the parking lamps together with the Changer . . . . . . . . . . . . . . . . . . . . . 6-2 following: Flash-to-Pass . . . . . . . . . . . . . . . . . 6-2 . Sidemarker Lamps Pedestrian Friendly Alert . . . . . . 6-2 Daytime Running . Taillamps Lamps (DRL) . . . . . . . . . . . . . . . . 6-3 . License Plate Lamps Hazard Warning Flashers . . . . . 6-4 The exterior lamp control is on the Turn and Lane-Change turn signal/lane change lever. . Instrument Panel Lights Signals . . . . . . . . . . . . . . . . . . . . . . 6-4 O (Exterior Lamp Control): 5 (Headlamps): Turns on the Operates the exterior lamps. Turn to headlamps, together with theInterior Lighting previously listed lamps and lights. Instrument Panel Illumination one of the following positions: Control . . . . . . . . . . . . . . . . . . . . . . 6-5 O (Off): Turns the exterior Dome Lamps . . . . . . . . . . . . . . . . . 6-5 lamps off. Reading Lamps . . . . . . . . . . . . . . . 6-5Lighting Features Entry Lighting . . . . . . . . . . . . . . . . . 6-5 Exit Lighting . . . . . . . . . . . . . . . . . . . 6-6 Battery Power Protection . . . . . . 6-6

6-2 LightingHeadlamp High/ Flash-to-Pass To use the pedestrian friendly alert:Low-Beam Changer The flash‐to‐pass feature works with Pull the turn signal/lane change the low beams or Daytime Running lever all the way toward you2 3 Headlamp High/Low‐Beam momentarily. See ExteriorChanger: Push the turn signal/lane Lamps (DRL) on or off. Lamp Controls on page 6‑1 andchange lever away from you and To flash the high beams, pull the Headlamp High/Low-Beam Changerrelease, to turn the high beams on. turn signal/lane change lever toward on page 6‑2. The high‐beamTo return to low beams, push the you momentarily and then release it. headlamps and indicator lightlever again or pull it toward you The Pedestrian Friendly Alert will will turn on, and a soft‐noteand release. also sound if the vehicle is moving alert will momentarily sound. less than 64 km/h (40 mph). When the turn signal/lane change Pedestrian Friendly Alert lever is released, the high‐beam headlamps and indicator light will While driving at low speeds, such turn off. as in parking lots, use this feature Repeat for additional activations of to alert people who may not hear the pedestrian friendly alert. your vehicle approaching.This indicator light turns on inthe instrument cluster when the The pedestrian alert is onlyhigh‐beam headlamps are on. available when the vehicle is moving at less than 64 km/h (40 mph) or is stopped and is not in P (Park).

Lighting 6-3Daytime Running When the DRL are on, the taillamps, sidemarker lamps, instrument panelLamps (DRL) lights, and other lamps will not beThe Daytime Running Lamps (DRL) on. The instrument cluster will be lit.system comes on in daylight when When the exterior lamp control bandthe following conditions are met: is turned to the headlamp position,. The vehicle is on. the low-beam headlamps come on. The other lamps that come on with. The exterior lamp control is in the headlamps will also come on. the automatic position. When the vehicle is on and you are. The electric drive unit is not in stopped, the DRL can be turned off P (Park). by moving the shift lever to P (Park).. The light sensor determines it is A light sensor on top of the The DRL will stay off until the shift daytime. instrument panel makes the DRL lever is moved out of the P (Park) work, so be sure it is not covered. position. Fully functional DRL are required on The regular headlamp system all vehicles first sold in Canada. should be turned on when needed.

6-4 LightingHazard Warning Flashers Turn and Lane-Change Raise or lower the lever until the arrow starts to flash to signal a lane Signals change. Hold it there until the lane change is complete. If the lever is moved momentarily to the lane change position, the arrow will flash three times. The lever returns to its starting position when it is released. An arrow on the instrument cluster If a turn signal arrow flashes rapidly will flash in the direction of the turn or does not come on, a signal bulb or lane change. may need to be replaced. See Bulb Replacement on page 10‑34. Move the lever all the way up or down to signal a turn.| (Hazard Warning Flasher):Press this button, on the centerstack, to make the front and rearturn signal lamps flash on and off.This warns others that you arehaving trouble.Press | again to turn theflashers off.

Lighting 6-5Interior Lighting The thumbwheel is on the instrument panel to the left Lighting Features of the steering column.Instrument Panel Entry Lighting Move the thumbwheel up or down toIllumination Control brighten or dim the lights. The headlamps, parking lamps, taillamps, back‐up lamps, and the Dome Lamps interior lights turn on briefly, when the Remote Keyless Entry (RKE) The dome lamp controls are in the transmitter K is pressed. The lights overhead console. turn off immediately when the To operate, press the following POWER O button is pressed or buttons: automatically after a brief period. + (On): Press to turn on the dome lamps. 1 (Door): Press to turn the lamps on automatically when a door is opened.The brightness of the instrument * (Off): Press to turn the lampspanel cluster display, infotainment off, even when a door is open.display and controls, steering wheelcontrols, and all other illuminated Reading Lampscontrols, as well as feature statusindicators can be adjusted. The front reading lamps are in the overhead console. #$: Press to turn each lamp on or off.

6-6 LightingExit Lighting Battery Power ProtectionThe headlamps, parking lamps, The battery saver feature istaillamps, back‐up lamps, and designed to protect the vehicleslicense plate lamps come on 12‐volt battery.when the vehicle is turned off. If the exterior lamps or any interiorSome interior lights also come lamp is left on and the vehicle ison when the vehicle is turned off. turned off, the battery rundownThe exterior lamps and interior protection system automaticallylights remain on after the door turns the lamps off after aboutis closed for a brief period and 10 minutes.then turn off.The exit lighting featurecan be changed. See VehiclePersonalization on page 5‑53.

Infotainment System 7-1Infotainment Audio Players CD/DVD Player . . . . . . . . . . . . . . 7-18 Vehicle Positioning . . . . . . . . . . Problems with Route 7-75System MP3 . . . . . . . . . . . . . . . . . . . . . . . . . Hard Drive Device (HDD) . . . . 7-23 7-26 Guidance . . . . . . . . . . . . . . . . . . . If the System Needs 7-76 Auxiliary Devices . . . . . . . . . . . . 7-38 Service . . . . . . . . . . . . . . . . . . . . . 7-76Introduction Ordering Map DVDs . . . . . . . . . 7-76 Navigation Database Coverage Infotainment . . . . . . . . . . . . . . . . . . . 7-2 Using the Navigation Theft-Deterrent Feature . . . . . . . 7-3 Explanations . . . . . . . . . . . . . . . 7-77 System . . . . . . . . . . . . . . . . . . . . . 7-39 Overview . . . . . . . . . . . . . . . . . . . . . . 7-3 Maps . . . . . . . . . . . . . . . . . . . . . . . . 7-44 Voice RecognitionRadio Navigation Symbols . . . . . . . . . 7-47 Voice Recognition . . . . . . . . . . . 7-77 AM-FM Radio . . . . . . . . . . . . . . . . 7-10 Destination . . . . . . . . . . . . . . . . . . 7-51 OnStar® Destination Phone Satellite Radio . . . . . . . . . . . . . . . 7-16 Bluetooth . . . . . . . . . . . . . . . . . . . . 7-85 Radio Reception . . . . . . . . . . . . . 7-17 Download . . . . . . . . . . . . . . . . . . 7-64 Multi-Band Antenna . . . . . . . . . . 7-18 Configure Menu . . . . . . . . . . . . . 7-66 Global Positioning System (GPS) . . . . . . . . . . . . . . 7-74

7-2 Infotainment SystemIntroduction This system provides access to Notice: Contact your dealer many audio and non‐audio listings. before adding any equipment.Infotainment To minimize taking your eyes off the Adding audio or communication road while driving, do the following equipment could interfere withThe vehicle has a navigation system while the vehicle is parked: the operation of the engine,with an AM-FM radio. Read the radio, or other systems, andfollowing pages to become familiar . Become familiar with the operation and controls of could damage them. Followwith its features. federal rules covering mobile the audio system. radio and telephone equipment. { WARNING . Set up the tone, speaker adjustments, and preset The vehicle has Retained Taking your eyes off the road radio stations. Accessory Power (RAP). With RAP, for extended periods could the audio system can be played For more information, see Defensive even after the vehicle is turned off. cause a crash resulting in Driving on page 9‑4. See Retained Accessory Power injury or death to you or others. (RAP) on page 9‑22 for more Do not give extended attention to information. entertainment tasks while driving.

Infotainment System 7-3Theft-Deterrent Feature Overview screen appears and OK must be pressed to access the NAV andThe theft-deterrent feature works When the navigation system is DEST functions. See instructionsby learning a portion of the turned on, a screen may appear that later in this section.Vehicle Identification Number must be read and acknowledged.(VIN) to the infotainment system. To get started, set your preferencesThe infotainment system does not or delete information in theoperate if it is stolen or moved to navigation system using variousa different vehicle. options. Navigation System Overview See “Navigation Buttons” under Using the Navigation System on page 7‑39 for more information. If the Caution screen appears, press OK. If either the NAV or DEST buttons are pressed, this Caution

7-4 Infotainment System A. RADIO BAND (AM, FM, XM) B. HDD/DVD/AUX (Source) C. FAV (Favorite) D. TUNE/MENU E. } BACK F. TONE G. CONFIG (Configuration) H. r SEEK/SEEK [ I. V / 0 (Phone/Mute) J. TP (Time Program) K. DEL (Delete) L. O REC (Record) M. k (Play/Pause) N. VOL/ O (Volume/Power) O. INFO (Information) P. DEST (Destination) Q. NAV (Navigation) R. RPT (Repeat)

Infotainment System 7-5S. AS1-2 (Autostore) Config Setup MenuT. X (Eject)NAV (Navigation) MenuUse the Navigation Menu screento access the navigation systemsettings. See Using the NavigationSystem on page 7‑39 for moreinformation. . Press the NAV button to change between a map/audio split view or a full map view. Press the CONFIG button to display the Config Menu. The Config Menu is used for changing the settings for the audio, navigation display, phone, vehicle configuration, and time features. Turn the TUNE/MENU knob to scroll through the available setup features.. Press the NAV button to view Once the desired feature displays, the navigation map screen. press the TUNE/MENU knob or The map and the current press the desired feature on the vehicle location display. screen, to display more options within that feature.

7-6 Infotainment SystemLanguages Deleting Personal Information Storing Radio Station PresetsTo change the display language, The navigation system can record Up to 36 preset stations cansee Vehicle Personalization on and store destinations and personal be stored. AM, FM, and XM,page 5‑53 for more information. information such as names and if equipped, can be mixed.The vehicle supports English, addresses. To store presets:French Canadian, and Spanish. It is recommended that this 1. Press VOL/ O to turn theThe default language is English. information be deleted when system on. selling or disposing of the vehicle:English and Metric Unit If viewing a map screen, pressConversion . Previous Destinations the RADIO BAND button.To change the display readings . Address Book, Fav Route, 2. Select the band.between English and metric units, Preset Destinations, and HDD Music Files 3. Seek or tune to the desiredsee Driver Information Center (DIC) station to select it.on page 5‑43 for more information. 4. Press and hold one of the preset screen buttons for more than two seconds. 5. Repeat the steps for each preset. To change the number of preset pages, see “Mixed-Band Presets” under AM-FM Radio on page 7‑10 for more information.

Infotainment System 7-7Entering an Address and Point 3. Select the street name field. 5. Select the city from the list orof Interest, and Storing Preset Enter the street name. Do not enter the city name.Destinations enter directional information 6. Enter the house number. or street type. Use the space This field is automaticallyThe vehicle must be in P (Park) to screen button between streetperform these operations. selected. and city names. Use theEntering an Address backspace q screen button to 7. Press the OK screen button. delete an incorrect character. The address information screenTo more easily find a city or a displays the address entered.street name: A list displays if four or fewer names are available. If there 8. Press the Go screen button if. Enter the street name first correct. The route will calculate. instead of the city name, are more than four, there is a or vice versa. match counter with a number 9. Select the route preference for of available streets. Press the Fastest, Shortest, or Easiest.. Enter more characters or reduce List screen button to view the See “Navigation Settings” under the number of characters to list and select the street. Using the Navigation System on reduce or expand the available page 7‑39 for more information. options. 4. Press the state/province name field on the touch screen 10. Press the Start GuidanceTo set a destination by entering a to change it. The last state/ screen button and the routestreet name: province name is automatically is calculated.1. Press the DEST button. recalled. See “Address Entry” under2. Press the Address Entry button Destination on page 7‑51 for more on the touch screen. information.

7-8 Infotainment SystemEntering a Point of Interest (POI) 6. Press the Go screen button. 5. Press Save from the mapTo set a destination by entering a The system calculates the route. screen to add the current finalPoint of Interest (POI): 7. Select the route preference for destination to the address book. Fastest, Shortest, or Easiest. 6. Press the Edit screen button1. Press VOL/ O to turn the The system highlights the route. and then press the Change system on. Name field on the screen. 8. Press the Start Guidance screen2. A caution could appear. button. The route is now ready An alpha-keyboard displays. Press OK to proceed. to be started. Enter the name.3. Press the DEST button. See Destination on page 7‑51 for 7. Press and hold one of the more information on how to enter screen buttons at the bottom4. Press the Point of Interest of the screen until the text in screen button. a POI. the button changes.5. Enter the specific title of the Storing Preset Destinations The address book entry POI in the POI name space name appears in that preset (e.g., Washington Monument). 1. Press VOL/ O to turn the system on. destination screen button and If four or fewer names are is now available to select from available, a list displays. If more 2. If a caution appears, press the the Select Destination screen. than four are available, there is a OK screen button to proceed. See “Using the Stored Preset match counter with a number in 3. Press the DEST button. Destinations” following to select it, representing the number of it as a destination. available POI names. Press the 4. Enter a destination. See Destination on page 7‑51 See Destination on page 7‑51 List screen button to view the for more information on how to list. Select the POI. for information on how to enter a destination. add preset destinations.

Infotainment System 7-9Using the Stored Preset Canceling Guidance 3. Press Voice Volume.Destinations Guidance is canceled at the final 4. Press the + or – screen buttonsThese destinations are available for destination. To cancel guidance to increase or to decrease theselection while driving. prior to reaching the final volume of the voice prompts. destination: See Using the Navigation System1. Press VOL/ O to turn the on page 7‑39 for more information. system on. 1. Press the DEST button.2. A caution could appear. 2. Press the Cancel Guidance Cleaning the Display Press the OK screen button screen button. If the center stack or the display is to proceed. 3. Press the Yes screen button to stained, wipe it with a dry, soft cloth.3. Press the DEST button. confirm cancellation. Notice: Using abrasive cleaners4. Press one of the available Voice Guidance when cleaning glass surfaces, preset destination screen could scratch the glass. When To adjust the volume of voice buttons. The system calculates cleaning the glass, use only a guidance prompts: the route. soft cloth and do not spray 1. Press the CONFIG button to cleaner directly on the system.5. Select the route preference for enter the menu features. Turn Fastest, Shortest, or Easiest. Do not wipe the center stack with the TUNE/MENU knob until Nav The system highlights the route. a hard cloth or use a volatile liquid displays. Press the TUNE/MENU such as paint thinner; it could6. Press the Start Guidance screen knob to select Nav or press the scratch the surface or erase button. The route is now ready Nav screen button to display the characters on the buttons. to be started. more options within that feature.See “Preset Destinations” under 2. Press Voice Prompt.Destination on page 7‑51 for moreinformation.

7-10 Infotainment SystemRadio RADIO BAND: Press to select the AM, FM, and XM (if equipped) band.AM-FM Radio The audio sources can also be changed by using the steeringPlaying the Radio wheel controls. See Steering Wheel Controls on page 5‑6Audio Source Menu for more information.VOL/ O (Volume/Power): HDD/DVD/AUX: Change to the1. Press to turn the radio on or off. Hard Drive, CD, DVD, USB, or AUX Press the source indicator button by pressing the HDD/DVD/AUX to display the current audio source2. Turn to increase or decrease button until the desired source is the volume. The volume is screen. The display shows a split selected. screen with the audio source screen adjusted for the current audio source, active navigation voice on the left side and the map or guidance, voice prompts, guidance screen on the right side. or audio cues. Press the Full Map button to exit the split screen.The steering wheel controls canalso be used to adjust the volume.See Steering Wheel Controls onpage 5‑6 for more information.TUNE/MENU: Turn to changethe radio station. See “Finding aStation” in this section for more If the audio source is on whileinformation. viewing a map screen, a source indicator button displays at the top of the map screen.

Infotainment System 7-11Navigation Audio System Adjusting the Speakers EQ SettingsSound Menu To adjust the speaker balance using the Sound menu:To access the Sound menu, pressthe TONE button. . Press and hold the left arrow for more sound from the leftUse the Sound menu to adjust the speakers or the right arrowfollowing features: for more sound from the right. Setting the Tone speakers. The middle position. balances the sound between Adjusting the Speakers the left and right speakers.Setting the Tone To adjust the speaker fade:To adjust the tone using the EQ (Equalization): The EQ . Press and hold the front arrow settings are selected throughSound menu: for more sound from the front the Sound menu. If the vehicle is. Treble: Press + or − to change speakers and the rear arrow equipped with the Bose® Energy the level. for more sound from the rear Efficient Series sound system, speakers. The middle position EQ provides a choice of Manual. Mid (Midrange): Press + or − to balances the sound between or Talk settings. change the level. the front and rear speakers.. Bass: Press + or − to change the level.

7-12 Infotainment SystemRadio Menu Audio Cue OptionsThere are two ways to access theRadio menu: Audio Cue Volume: Press the + or This menu allows changes to the − screen buttons to adjust the audio Audio Cue features. cue volume. The audio cue volume has a minimum volume. A “Limit. Press the CONFIG button, then Audio Cue Options are used to Reached” pop-up will display when press the Radio screen button. welcome the driver to the car as the volume has been changed to well as indicate when the vehicle. Turn the TUNE/MENU knob less than the minimum volume. is ready to drive or when the vehicle until Radio displays. Press the is no longer ready to drive. Press the Audio Cue Volume screen TUNE/MENU knob to select button to hear the selected sound Radio or press the Radio screen level. button to display more options within that feature. The audio cues can also be changed by adjusting the TUNE/MENU knob. Audio Cues: Press to turn the audio cues on or off. A checkmark indicates the audio cues are on.

Infotainment System 7-13Auto Volume Show/Hide XM Categories Local Station List SearchSelect OFF, Low, Medium, or High Configure favorite categories to besensitivity to automatically adjust used during XM mode.the volume to minimize the effectsof unwanted background noise DivX Registration Codethat can result from changing road Display the DivX registration codesurfaces, driving speeds, or open used for DivX media playback.windows. This feature works bestat lower volume settings where Finding a Stationbackground noise is typically louder To select the band, see “Audiothan the sound system volume. Source Menu” earlier in this section. To find a list of local stationsNumber of Favorite Pages Turn the TUNE/MENU knob to find in the current band, press the a radio station. To select a preset TUNE/MENU knob. The radioChange the number of mixed-band station, press the corresponding performs a search for availablepreset pages when using the FAV preset button. stations.button. Press 1-6 to select thenumber of preset lists. See “Mixed-Band Presets” later for Mixed-Band Presets more information.HDD FAV Pages (Number Up to 36 preset stations canof Favorite Categories for Seeking a Station be stored. Each page can storeHDD Mode) six preset stations. The presets Press r SEEK/SEEK [ to search within a page can be from differentSelect the categories such as for a station.Playlist, Artist, Album, and Genre radio bands.to be used as a favorite categoryduring HDD mode.

7-14 Infotainment SystemTo scroll through the pages, press 4. Press and hold one of the Timeshiftthe FAV button. The current page preset buttons for more than The timeshift feature automaticallynumber displays above the preset two seconds. The station begins recording the audio whenbuttons. The stored stations for frequency appears on the listening to the radio.each list display on the preset preset button at the bottombuttons at the bottom of the screen. of the display. The recording allows playback ofThe number of preset FAV lists can content that was missed. 5. Repeat the steps for each presetbe changed. in each page. Timeshift stores up to 20 minutesTo store a radio station to a of content. After 20 minutes, it To recall a preset station from amixed-band preset list: removes the oldest content and FAV page: continues recording new content.1. Press the RADIO BAND button, 1. Press the FAV button to scroll to then press AM, FM, or XM, While listening to the radio, press the page. if equipped, to select the k (Play/Pause) to stop hearing the desired band. 2. Press the preset button. information through the speaker. The stored preset station During this paused time, timeshift2. Tune to the station. is recalled. keeps recording. A status bar3. Press the FAV button to scroll to displays the length of the recording. the list.

Infotainment System 7-15To resume listening to the broadcast Radio Data System (RDS) This system relies on receivingat the point left off, press k again. specific information from these The audio system has a Radio stations and only works whenTimeshift stops recording and Data System (RDS). RDS features the information is available.erases the buffer when the vehicle are available for use only on In rare cases, a radio station couldis turned off or the station or source FM stations that broadcast broadcast incorrect informationis changed. RDS information. With RDS, that causes the radio features to the radio can:Before turning the vehicle off, press work improperly. If this happens,k so that timeshift keeps recording . Seek to stations broadcasting contact the radio station.for 20 minutes. If the vehicle is still the selected type of The RDS system is always on.off after 20 minutes, the system programming. When information is broadcast fromstops recording and all information . Receive announcements the current FM station, the stationis lost. If a low 12-volt battery concerning local and national name or call letters display on thecondition occurs, timeshift stops emergencies. audio screen. RDS can provide arecording and all information is program type (PTY) for currenterased. . Display messages from radio stations. programming and the name of the program being broadcasted.

7-16 Infotainment SystemSatellite Radio XM Categories XM Updating: The encryption code in the receiver is being updated.XM™ Satellite Radio Service XM stations are organized in No action is required. This process categories.Vehicles with an XM satellite radio should take no longer thantuner and an XM satellite radio Removing or Adding Categories 30 seconds.subscription can receive XM 1. Press the CONFIG button. Loading XM: The audio systemprogramming. Turn the TUNE/MENU knob is acquiring and processing audioXM is a satellite radio service based until Radio displays. Press the and text data. No action is needed.in the 48 contiguous United States TUNE/MENU knob or press This message should disappearand 10 Canadian provinces. XM Radio to display the radio shortly.satellite radio has a wide variety of settings menu. Channel Off Air: This channel isprogramming and commercial-free 2. Select the Show/Hide XM not currently in service. Tune in tomusic, coast to coast, and in Categories screen button. another channel.digital-quality sound. A service Channel Unauth: This channel is 3. Press the category buttons onfee is required to receive the XM the screen to show or hide the blocked or cannot be received withservice. For more information, category. your XM subscription package.see www.xmradio.com or call1-800-929-2100 in the U.S. XM Messages Channel Unavailable: ThisIn Canada, see www.xmradio.ca previously assigned channel isor call 1-877-438-9677. XL (Explicit Language no longer assigned. Tune to Channels): These channels, or any another station.When XM is active, the channel others, can be blocked by request,name and number, category name, by calling 1-800-929-2100 in the No Artist Info: The systemsong title, and artist display on the U.S., and 1-877-438-9677 in is working properly. No artistscreen. Canada. information is available at this time on this channel.

Infotainment System 7-17No Title Info: The system is CAT Not Found: The system is Radio Receptionworking properly. No song title working properly. There are noinformation is available at this channels available for the selected Frequency interference and statictime on this channel. category. can occur during normal radio reception if items such as cell phoneNo CAT Info: The system is XM Radio ID: If tuned to channel 0, chargers, vehicle convenienceworking properly. No category this message alternates with the accessories, and external electronicinformation is available at this XM radio eight‐digit radio ID label. devices are plugged into thetime on this channel. This label is needed to activate the accessory power outlet. If there isNo Information: The system service. interference or static, unplug theis working properly. No text or Unknown: If this message is item from the accessory powerinformational messages are received when tuned to channel 0, outlet.available at this time on this there could be a receiver fault.channel. Consult with your dealer. FMNo XM Signal: The system is Check Antenna: If this message FM signals only reach about 16 to 65 km (10 to 40 mi). Although theworking properly. The vehicle may does not clear within a short period radio has a built-in electronic circuitbe in a location where the XM signal of time, the receiver could have ais being blocked. When the vehicle fault. Consult with your dealer. that automatically works to reduce interference, some static can occur,is moved into an open area, the XM Not Available: If this message especially around tall buildings orsignal should return. does not clear within a short period hills, causing the sound to fade in of time, the receiver could have a and out. fault. Consult with your dealer.

7-18 Infotainment SystemAM Cellular Phone Usage Audio PlayersThe range for most AM stations is Cellular phone usage can causegreater than for FM, especially at interference with the vehicles radio. CD/DVD Playernight. The longer range can cause The player can be used for CD,station frequencies to interfere with Multi-Band Antenna MP3, and DVD audio, and as aeach other. Static can occur whenthings like storms and power lines The multi-band antenna is on the DVD video player.interfere with radio reception. When roof of the vehicle. The antenna With the vehicle on, insert athis happens, try reducing the treble is used for the AM‐FM radio, CD/DVD into the slot, label sideon the radio. OnStar, the XM Satellite Radio up. The player pulls it in and Service System, and GPS (Global begins playing. While playing,XM™ Satellite Radio Service Positioning System), if the vehicle the navigation system is available. has these features. Keep theXM Satellite Radio Service gives The vehicle must be in P (Park) for antenna clear of obstructionsdigital radio reception from coast video to display.to coast in the 48 contiguous for clear reception.United States, and in Canada. The DVD player is only compatibleJust as with FM, tall buildings or with DVDs of the appropriate regionhills can interfere with satellite radio code printed on the jacket ofsignals, causing the sound to fade most DVDs.in and out. In addition, travelingor standing under heavy foliage,bridges, garages, or tunnels maycause loss of the XM signal for aperiod of time.

Infotainment System 7-19The system is capable of playing: There can be increased skipping, Loading and Ejecting Discs. Most audio CDs difficulty in recording tracks, To load a disc: difficulty in finding tracks/chapters,. CD-R and/or difficulty in loading and 1. Turn the vehicle on.. CD-RW ejecting. If these problems occur, 2. Insert a disc into the slot, label check the disc for damage or try side up. The player pulls it in. MP3 or unprotected WMA a known good disc. the rest of the way. If the disc is formats To avoid damage to the CD/DVD damaged or improperly loaded,. DVD-Video player: there is an error and the disc. DVD-Audio ejects. . Do not use scratched or. DVD-R/RW damaged discs. The disc automatically plays once loaded.. DVD+R/RW . Do not apply labels to discs.When playing any compatible The labels could get caught Press X to eject a disc from the in the player. CD/DVD player.recordable disc, the sound qualitycan be reduced due to disc quality, . Insert only one disc at a time. Playing a CD/DVDthe method of recording, the quality . Keep the loading slot free ofof the music or video that has been A disc must be loaded to select the foreign materials, liquids,recorded, or the way the disc has source. and debris.been handled. When a disc is loaded, the disc icon . Use a marking pen to label the displays. top of the disc.

7-20 Infotainment SystemThere are two ways to play a SEEK [: CD MenuCD/DVD: . Press to seek to the next track.. Insert the disc and play starts automatically. . Press and hold to fast forward through a track. Release the. Press the HDD/DVD/AUX button to return to playing button, then press the disc speed. Elapsed time displays. screen button. r SEEK:Playing an Audio CD . Press to seek to the beginning of the current or previous track. If the track has been playing for Press the CD Menu screen button less than five seconds, it seeks to display the CD Menu. the previous track. If longer than five seconds, the current track Shuffle: Press to play the starts from the beginning. tracks randomly rather than in sequence. Press again to stop . Press and hold to fast reverse shuffle. A checkmark indicates through a track. Release the shuffle is on. button to return to playing speed. Elapsed time displays. Track List: Press to display the listA track number displays at the of tracks on the disc. Select a trackbeginning of each track. Song, TUNE/MENU: Turn to the right or from the list. The selected trackArtist, and Album information left to display the track list. Turn plays and the CD screen displays.displays when available. it again to cycle through the list.Use the following controls to play Press this knob to select the track.the disc: The system plays the selected track and returns to the CD screen.k (Play/Pause): Use to start,pause, or resume play.

Infotainment System 7-21Playing an Audio and There are two pages of DVD q, Q , r , R (Arrow Buttons):Video DVD options. Press the arrow screen Use these arrow screen buttons to button, in the bottom right corner navigate through the DVD menu.To view the DVD video, the vehicle of the screen, to access the othermust be in P (Park) or the parking page. Only the highlighted functions k (Play/Pause): Use to start,brake must be engaged. are available for use. Some menu pause, or resume play. options are only available when the SEEK [: disc is not playing. 1. Press to seek to the next DVD Options chapter. Full Screen: 2. Press more than once to 1. Press to hide the DVD options continue moving forward through and display the full video image. the disc. 2. Press anywhere on the 3. Press and hold to fast forward navigation system screen or through a disc. When fastAfter the DVD is loaded, the menu press the FAV, HDD/DVD/AUX, forward is active, press againoptions display on the DVD screen. or } BACK button to display the to change the speed. ElapsedThe menu options time out and time displays. source screen buttons over thea full screen appears after about10 seconds. Press anywhere on video image. 4. Press k to resume playing.the navigation system screen or Cursor: Press this buttonpress the FAV, HDD/DVD/AUX, to access the Cursor menu. The arrows and other cursoror } BACK button to view the options allow navigation of themenu screen again. DVD menu options. The CursorUse the preset keys or press screen menu options are only availablebuttons to operate the DVD options. if a DVD has a menu.

7-22 Infotainment Systemr SEEK: Stop: Menu: Press to display the menu 1. Press on the display screen for the part of the DVD currently1. Press to seek to the beginning of playing. Availability of this feature the current or previous chapter. to show the available buttons. Press the stop button to stop is dependent on the DVD and is If the chapter has played for not available for audio DVDs. less than five seconds, it goes the DVD. to the previous chapter. If the 2. To resume playing the DVD from Keypad: Press to display and chapter has played longer than search through the chapter, track, where it stopped, press k. or menu number screen. On the five seconds, the current chapter is restarted. More than one 3. Press k twice to start the DVD keypad, enter the title/chapter press continues moving back number or the group/track number. from the beginning. through the disc. Search: Press to perform a title Z (Shuffle): search.2. Press and hold to fast reverse through a disc. When fast 1. Press to play the tracks Angle: Press to adjust the viewing reverse is active, press again randomly rather than in angle of the DVD, depending on to change the speed. Elapsed sequence. the DVD, while the DVD is playing. time displays. 2. Press again to play sequentially. Continue pressing to cycle through This button is available for DVD the viewing angles. k to resume playing.3. Press audio discs. Audio: Press to change the audioTUNE/MENU: Press r SEEK/ Top Menu: Press to display the stream and the audio languageSEEK [ to go to the next or first menu of the DVD. Availability heard, while the DVD is playing.previous chapter. You can also of this feature is dependent on Continue pressing to cycle throughchange chapters by turning the the DVD. the available audio streams orTUNE/MENU knob after touching languages, depending on the DVD.the screen.

Infotainment System 7-23 . The disc is very hot. Try the discSubtitle: Press while a DVD is again when the temperature MP3playing to view with subtitles onor off or to change the language of returns to normal. Playing an MP3 CD and DVDthe subtitles. Continue pressing to . The road is very rough. Try the The following guidelines must becycle through the available subtitle disc again when the road is met when creating an MP3 disc,languages and to turn subtitles off, smoother. otherwise the CD might not play:depending on the DVD playing. . The disc is dirty, scratched, wet, . Sampling rate: 8 kHz, 16 kHz,Pan Scan: Pan Scan is a method or upside down. 22.05 kHz, 24 kHz, 32 kHz,of adjusting widescreen film images 44.1 kHz, and 48 kHz.so that they can be proportioned to . The air is very humid. Try thefit the DVD screen display. Press disc again later. . Bit rates supported: 8, 16, 24,this screen button to turn on . There was a problem while 32, 40, 48, 56, 64, 80, 96, 112,Pan Scan. burning the disc. 128, 144, 160, 192, 224, 256, and 320 kbps.Error Messages . The label is caught in the . Maximum number of folders: 255 CD/DVD player.If Disc Read Error displays and/or with a maximum hierarchy ofthe disc comes out, it could be for If the CD or DVD is not playing eight folders.one of the following reasons: correctly, for any other reason, try a known good CD or DVD. . Maximum of 1,024 files on. The disc has an invalid or a disc. unknown format. If any error continues, contact your dealer. . Recorded on a CD-R or CD-RW. The disc is not from a correct with a maximum capacity of region. 700 MB. . DVD-Dual Layer discs should not be used.

7-24 Infotainment System. The Artist/Album/Song Titles/ To play a disc: 3. Press and hold this button Genre information requires a to reverse quickly through CD to be fully scanned before k (Play/Pause): Use to start, playback. the music navigator works with pause, or resume play of a these menus. Disc scanning loaded disc. 4. Release the button to return to does not occur when the disc playing speed. Elapsed time SEEK [: displays. is being played. 1. Press to seek to the next track. TUNE/MENU:When an MP3 is loaded in theplayer, MP3 displays. 2. Press again to continue moving 1. Turn to the right or left to display forward through the disc. the track list. 3. Press and hold to advance 2. Turn it again to cycle through quickly through playback. the list. 4. Release the button to return to 3. Press TUNE/MENU to select playing speed. Elapsed time the track. The system plays the displays. selected track and returns to the r SEEK: CD screen. 1. Press to seek to the beginning MP3 Music Menu of the current or previous track. Press the Disc Menu screen buttonIf a disc is already loaded, but you If the track has played for lessare currently on a map screen or or press the TUNE/MENU knob than five seconds, it goes to the on the faceplate while on the disclistening to a different audio source, previous track. If longer thanpress the HDD/DVD/AUX button to audio screen to display the MP3 five seconds, the current track Music Menu.switch to the disc source. A track restarts.number appears on the displaywhen each track starts to play. 2. Press again to continue moving back through the disc.

Infotainment System 7-25 . Track List (All Songs) . Genres Press to view a list of all songs Press to view the genres on the on the disc. There might be a disc. Select a genre to view a delay before the list displays. list of all songs of that genre. Select a song from the list and There might be a delay before it begins to play. Songs are the list displays. Select a song displayed based on the CD from the list and it begins to play. burning application folder . Song Titles and file structure used.Press any of the following category Press to display a list of all . Artists songs on the disc. There mightbuttons on the MP3 Music Menu todisplay the corresponding category Press to view the list of artists be a delay before the listscreen: stored on the disc. Select an displays. Select a song from the artist name to view a list of list and it begins to play. Songs. Folders/Playlists all songs by the artist. There are displayed in alphabetical Press to view the folders stored might be a delay before the list order based on the Song Title on the disc. Select a folder to displays. Select the desired ID3 tag, if available. view the list of all songs in that song from the list and it begins folder. There might be a delay to play. Root Directory before the list displays. Select . Albums The root directory is treated the song from the list and it as a folder. All files contained begins to play. Press to view the albums on the directly under the root directory are disc. Select the album to view accessed prior to any root directory a list of all songs on the album. folders. There might be a delay before the list displays. Select a song from the list and it begins to play.

7-26 Infotainment SystemEmpty Directory or Folder Preprogrammed Playlists For optimal recording performance,If a root directory or folder is empty The radio recognizes make sure the disc is clean withor contains only folders, the player preprogrammed playlists; no damage; otherwise the systemadvances to the next folder in however, there is no editing might partially record the track.the file structure that contains a capability. These playlists arecompressed audio file. The empty treated as special folders containingfolder(s) are not displayed or compressed audio song files.numbered.No Folder Hard Drive Device (HDD)When the CD only contains With a Hard Drive Device (HDD),compressed audio files without songs can be recorded.any folders or playlists, all files The types of formats supported byare under the root folder. the HDD are: To select the hard drive audioFile System and Naming . MP3 source:The displayed song title is taken . MP3-Pro Press the HDD/DVD/AUX button;from the files ID3 tag. If a song . WMA cycle through the available audiotitle is not present in the ID3 tag, sources until the HDD sourcethe radio displays the file name . Audible.com displays or press the HDD/DVD/as the track name. . M4A AUX button once, and then press Songs can be recorded from the HDD source button. a CD player or a mass media storage device connected by a USB connector. The hard drive has 30 GB memory capacity for storage of media files.

Infotainment System 7-27Recording from a CD to the To record selected tracks from 2. Press the O REC button.Hard Drive the disc: 3. A confirmation displays.The speed of the recording 1. Load a CD or press the HDD/DVD/AUX button until 4. Select All Songs to copy allincreases if you are listening to the Disc screen displays. tracks. A progress bar displays.another source while recording. To record selected tracks:To record all tracks from the disc: 2. Press r SEEK/SEEK [ or the CD/MP3 Music Menu to select a 1. Connect a USB device or press1. Load a CD or press the song for recording. the HDD/DVD/AUX button until HDD/DVD/AUX button until the disc screen displays the the Disc screen displays. 3. Press the O REC button. USB screen.2. Press the O REC button. 4. A confirmation displays. 2. Use the r SEEK/SEEK [ or3. A confirmation displays. 5. Select the song name to record. the Music Menu to select a song A progress bar displays. for recording. Recording from a USB Device 3. Press the O REC button. to the Hard Drive 4. A confirmation displays. To copy all tracks from the USB 5. Select the song name to record. device: A progress bar displays. 1. Connect a USB device or press the HDD/DVD/AUX button until the disc screen displays the USB screen.4. Select All Songs to record all tracks. A progress bar displays.

7-28 Infotainment SystemDuplicate Content Power Mode SEEK [:When the record function starts, If the system is turned off during 1. Press to seek to the next track.there is a check to verify that the a CD or USB recording process,content does not already exist on it stops. When the radio is turned 2. Press and hold to advancethe hard drive. If the entire content back on, the recording process quickly through playback.of the CD exists on the hard drive, does not resume automatically. 3. Release the button to return toit will not record the content. playing speed. Elapsed time Playing Hard Disc Drive displays.If it is determined that some or none Contentof the content exists, then only that r SEEK:missing content will be copied to the 1. Press to seek to the beginninghard drive. of the current or previous track.If the same file is recorded from the If the track has been playingUSB and CD, it is possible to have for less than five seconds, theduplicate tracks. previous track plays. If longer than five seconds, the currentCD Eject track restarts.If the CD ejects before the recording 2. Press and hold this buttonprocess completes, only tracks that to reverse quickly throughhave been completely recorded are To operate hard drive functions playback.stored to the hard drive. Incomplete while the HDD source is active,tracks are discarded. use the following buttons or 3. Release the button to return to touch-sensitive buttons: playing speed. Elapsed time displays. k (Play/Pause): Press to start, pause, or resume play of the current media source.

Infotainment System 7-29TUNE/MENU: Playlists:1. Turn to the right or left to display 1. Press to view the playlists on the All Songs. hard drive.2. Turn it again to cycle through 2. Select a playlist to view a list of the list. all songs in the playlist.3. Press the TUNE/MENU knob to 3. Select a song from the list. Once select the song. The system selected, Playlist Mode displays. plays the selected song and Artists: returns to the CD screen. Press any of the following buttons on the HDD Music Menu: 1. Press to view the artists on theDEL (Delete): hard drive. Shuffle: Press to play the tracks1. Select the song from the HDD 2. Select an artist to view a list of randomly rather than in sequence. Music Menu screen to delete. all songs by that artist. More Like This: Press to use2. Press the DEL button. Gracenote® music recognition 3. Select a song from the list. OnceTo delete an entire list of Artists, technology and related data to selected, Artist Mode displays.Albums, or Genres, select the generate a list of songs similar to Albums:category from the HDD Music Menu the current song. Select a songscreen. Press the DEL button. from the list. 1. Press to view the albums on the hard drive.HDD Music Menu This feature is only available with songs recorded to the HDD from 2. Select an album to view a list ofFrom the HDD screen, press the all songs on the album. audio CDs, not MP3s and otherHDD Menu screen button on the compressed audio. 3. Select a song from the list. OnceHDD screen to display the HDDMusic Menu. When recording CDs to the HDD, selected, Album Mode displays. there might be delays to build the list until all files are compressed.

7-30 Infotainment SystemAll Songs: Saving HDD Favorites Playing HDD Favorites1. Press to view a list of all songs During HDD playback, to save the Favorites can be played two on the hard drive. current song playing to a category different ways:2. Select a song from the list. preset: . Press the FAV button until the Once selected, All Songs Mode 1. Press the FAV button until the appropriate FAV HDD category displays. FAV playlist category displays. displays. Press a preset buttonGenres: 2. Press and hold a preset button at the bottom of the FAV HDD on the bottom of the screen until screen.1. Press to view the genres on the hard drive. the Saved to Favorites message . Select FAV from the HDD displays. Music Menu. Favorite Artist,2. Select a genre to view a list of Album, and Genre are in the all songs of that genre. To save an entire Artist, Album, or Genre to a FAV category preset: corresponding list.3. Select a song from the list. Once selected, Genre Mode displays. 1. Press the FAV button until the correct FAV category appears.Recently Saved: Press to view alist of the 50 most recently saved 2. Press and hold a preset buttonsongs to the HDD. Once selected, on the bottom of the screen.Recently Saved Mode displays.

Infotainment System 7-31USB-Supported Devices Playing from a USB To play a USB device:The USB connector uses the A USB mass storage device can be 1. Connect the USB and it beginsfollowing: connected to the USB port to copy to play.. USB 2.0. compressed audio files onto the 2. Press the HDD/DVD/AUX hard drive. Content can also be button, then press the USB. USB flash sticks or pen drives. played directly from the USB screen button.. Portable USB Hard Drives. device. While the USB source is active, Special care needs to be taken The USB port is in the center use the following to operate USB related to the power source console. function: of these devices (USB bus powered vs. external power). k (Play/Pause): Press to start, pause, or resume play of the current. Portable media adapters that media source. support SD Flash, Compact Flash, or SD Micro. SEEK [:Depending on the USB mass 1. Press to seek to the next track.storage device, some devicesmight not be recognized. 2. Press and hold to advance quickly through playback.Music can be played directly from Release the button to returnthe USB device and controlled The USB icon displays when the to playing speed. Elapsedthrough the MP3 control functions USB device is connected. time displays.and menu.

7-32 Infotainment Systemr SEEK: USB Music Menu Track List: Press to view a list of songs and what track the songs are1. Press to seek to the beginning stored on. of the current or previous track. If the track has been playing Artists: Press to view the artists for less than five seconds, the stored on the USB. Select an artist previous track plays. If playing to view a list of all songs by the longer than five seconds, the artist. Select a song from the list. current track restarts. Once selected, Artist Mode displays.2. Press and hold to reverse quickly through playback. Albums: Press to view the albums Press the USB Menu screen button stored on the USB. Select an album3. Release the button to return to or press the TUNE/MENU knob to view a list of all songs on the playing speed. Elapsed time while on the USB Audio screen album. Select a song from the list. displays. to display the USB Music Menu. Once selected, Album ModeTUNE/MENU: displays. Select any of the following buttons1. Turn to the right or left to display on the USB Music Menu: All Songs: Press to view a list of the track list. all songs stored on the USB. Select Shuffle: Press to play the tracks a song from the list. Once selected,2. Turn it again to cycle through randomly rather than in sequence. All Songs Mode displays. the list. Select again to stop this function. Genres: Press to view the genres3. Press the TUNE/MENU knob Folders/Playlists: Select to view stored on the USB. Select a genre to select the track. The system the playlists stored on the USB. to view a list of all songs of that plays the selected track and Select a folder/playlist to view a list genre. Select a song from the list. returns to the USB screen. of all songs in the folder/playlist. Once selected, Genre Mode Select a song from the list. Once displays. selected, Folder/Playlist Mode displays.

Infotainment System 7-33Eject USB: Press when the USB For proper operation, make sure If the iPod is an unsupportedis to be removed. If the USB is the iPod has the latest firmware model, it can still be listened todisconnected without selecting from Apple®. iPod firmware can be in the vehicle by connecting toEject USB, the files could become updated using the latest iTunes® the auxiliary input jack using acorrupted. application. For more information, standard 3.5 mm (1/8 in) stereo visit www.apple.com/itunes. cable. See Auxiliary Devices onPlaying from an iPod® page 7‑38 for more information. Recording from the iPod to the HDD is not supported. Media must iPod Music Menu be recorded using a USB mass storage device. To connect and control an iPod, connect one end of the standard iPod USB cable to the iPods dock connector. Connect the other end to the USB port in the center console. iPod music information displaysThis feature supports the following on the radio’s display and beginsiPod models: playing through the vehicle’s audio Press any of the following buttons. iPod (fifth generation or later) system. on the iPod Music Menu to display. iPod nano (first, second, third, The iPod battery recharges the corresponding screen: fourth, and fifth generation) automatically while the vehicle Shuffle: is on. When the vehicle is off while. iPod classic 1. Press to play the tracks an iPod is connected using the iPod. iPod touch (first and second USB cable, the iPod battery stops randomly rather than in generation) charging and the iPod automatically sequence. turns off. 2. Press the button again to stop this function.

7-34 Infotainment SystemPlaylists: Albums: Genres:1. Press to view the playlists stored 1. Press to view the albums stored 1. Press to view the genres stored on the iPod. on the iPod. on the iPod.2. Select a playlist name to view a 2. Select an album name to view a 2. Select a genre name to view a list of all songs in the playlist. list of all songs on the album. list of all songs of that genre.3. Select the desired song from 3. Select the desired song from 3. Select the desired song from the list. Once a song has been the list. Once a song has been the list. Once a song has been selected, Playlist Mode appears selected, Album Mode appears selected, Genre Mode appears on the iPod main screen. on the iPod main screen. on the iPod main screen.Artists: All Songs: Composers:1. Press to view the artists stored 1. Press to view a list of all songs 1. Press to view the composers on the iPod. stored on the iPod. stored on the iPod.2. Select an artist name to view a 2. Select the desired song from 2. Select a composer name to list of all songs by the artist. the list. Once a song has been view a list of all songs by that3. Select the desired song from selected, All Songs Mode composer. the list. Once a song has been appears on the iPod main 3. Select the desired song from selected, Artist Mode appears screen. the list. Once a song has been on the iPod main screen. selected, Composer Mode appears on the iPod main screen.

Infotainment System 7-35Audio Books: Audio Book After inserting the USB or CD1. Press to view the audio books storage media, the following The system can play back audio stored on the iPod. screen displays: book content downloaded from2. Select the audio book from the Audible.com by either burning it list. Once an audio book has to a CD or recording it to a USB been selected, Audio Book storage device. Mode appears on the iPod Audible.com is a provider of main screen. spoken word audio entertainment,Podcasts appear with the general information, and educationalmusic. They do not have their own programming. The use of thecategory. Like the other music files, Audible.com playback featurethey are searchable by title, artist, requires that the Audible.comand album. account be activated with the radio. Press the All recording screen For more information on creating button to record all available audioEject iPod: Press to remove the an account or how to activate the books. A specific audio book toiPod. If the iPod is disconnected radio with an existing account, record can be selected by pressingwithout selecting this button, the visit www.audible.com/caraudio. the Select Book screen button.files on the iPod could be corrupted. The activation process requires the Vehicle Identification Number (VIN) After the files have been recorded, of the vehicle. eject the CD/USB external media. Once activated, files can be transferred by burning them to a CD or by using a USB storage device.

7-36 Infotainment SystemPlaying Audio Book Content 4. Select a chapter to startAfter activating and transferring playback.www.audible.com files to thesystem, play the files: 2. Press the HDD Menu. The HDD Music Menu displays. Scroll down to the Audio Book option and select. 5. The audio book begins playback.1. Press the HDD/DVD/AUX button until the HDD source is selected. 3. The Audio Book screen displays a list of the available audio books for playback. Select a book.

Infotainment System 7-37Selecting Another Audio BookTo play a different audio book fromthe one selected, return to the AudioBook menu options.To change the audio book currentlyplaying: 2. The Audio Book screen 4. The audio book begins displays a list of the available playback. audio books for playback. Select a book.1. Press the TUNE/MENU knob or press the HDD Menu screen button. The HDD Music Menu displays. Scroll down to the Audio Book option. 3. Select a chapter to start playback.

7-38 Infotainment SystemChanging Chapters within an Auxiliary Devices If an auxiliary device has alreadyAudio Book been connected, but a different This vehicle may have an auxiliary source is currently active, do eitherTo change chapters within an input jack in the center console.audio book: of the following to switch back to the Possible auxiliary audio sources auxiliary source: include: . Press the HDD/DVD/AUX button . Laptop computer repeatedly to cycle through all . MP3 player of the available audio source screens, until the AUX source . Tape player screen is selected. This jack is not an audio output. . Press the HDD/DVD/AUX button Do not plug headphones into the once, then press the AUX auxiliary input jack. Drivers are source screen button. encouraged to set up any auxiliaryWhile the audio book is playing, device while the vehicle is inturn the TUNE/MENU knob. P (Park).The chapter list of the current book Connect a 3.5 mm (1/8 in) cabledisplays. Select a chapter from the from the auxiliary device to thelist. To return to the current chapter auxiliary input jack. When abeing played, select the chapter device is connected, the systemwith the checkmark at the right. automatically begins playing audio from the device over the vehicle speakers.

Infotainment System 7-39 . Set up the audio by presettingNavigation favorite stations, setting the { WARNING tone, and adjusting theUsing the Navigation speakers. Avoid looking too long or tooSystem often at the moving map on the . Set up the navigation features navigation screen. This couldRead this section thoroughly to before beginning to drive, such as entering an address or a cause a crash and you or othersbecome familiar with how the can be injured or killed. Use thenavigation system operates. preset destination. turn-by-turn voice guidanceKeeping your eyes on the road and . For vehicles equipped with directions whenever possible.your mind on driving is important for phone capability, set up phonesafe driving. The navigation system numbers in advance so they can be called with the press Use the navigation system to:has built-in features intended tohelp do this. Some features may be of a single button or a single . Plan a route by selecting adisabled while driving. A grayed-out voice command. destination using the variousfunction indicates it is not available methods and choices.when the vehicle is moving. { WARNING . Follow turn-by-turn instructionsAll functions are available when the and map guidance with voice Taking your eyes off the road toovehicle is parked. Do the following prompts, when permitted by long or too often while using thebefore driving: traffic laws, controls, and navigation system could cause a conditions.. Become familiar with the crash resulting in injury or death navigation system operation, to you or others. Focus your . Receive RDS broadcast buttons on the faceplate, and attention on driving. announcements. touch-sensitive screen buttons of the navigation system.

7-40 Infotainment SystemAlways be alert and obey traffic Infotainment Control Buttons TUNE/MENU: Turn to highlightand roadway laws and instructions, a feature. Press to activate the The buttons on the faceplate areregardless of the guidance from highlighted feature. used to start primary functionsthe navigation system. Because } BACK: Press to return to while using the infotainment system.the navigation system uses street the previous screen in a menu. See Overview on page 7‑3. Thesemap information that does notinclude all traffic restrictions or buttons are: The } BACK button does not workthe latest road changes, it may RADIO BAND: Press to select AM, in primary screens, such as thesuggest using a road that is now FM, or XM, if equipped. map, audio, leaf, or climate screens.closed for construction or a turn HDD/DVD/AUX (Source): Change TONE: Press to open the tonethat is prohibited by signs at the to the Hard Drive, CD, DVD, USB, menu for sound adjustment.intersection. Because the system or AUX by pressing the HDD/DVD/uses limited information, always CONFIG (Configure): Press to AUX button until the desired source adjust features for radio, navigation,evaluate whether following the is selected.systems directions is safe and display, phone, vehicle, and time.legal for the current conditions. The audio sources can also be See Configure Menu on page 7‑66 changed by using the steering for more information.Use the buttons on the navigation wheel controls. See Steering Wheelsystem and the available screen Controls on page 5‑6 for more SEEK [:buttons on the navigation screen to information. 1. Press to seek to the next trackoperate the system. See Overview or chapter.on page 7‑3. FAV (Favorites): Press to display the current page number above the 2. Press and hold to advanceVarious functions are disabled when preset buttons. The stored stations quickly through playback.the vehicle is moving. for each list display on the preset 3. Release the button to return to buttons at the bottom of the touch playing speed. Elapsed time screen. The number of preset FAV displays. lists can be changed.

Infotainment System 7-41r SEEK: Adjust the time as needed. See NAV (Navigation): Press to view Configure Menu on page 7‑66 later the vehicles current position on1. Press to seek to the beginning of in this section. the map screen. Continue pressing the current or previous track or to cycle through the full map and chapter. If the track or chapter O REC (Record): Press to record split screen. Full Map displays the has been playing for less than from a CD player or a mass media storage device connected by a USB screen in full view; Split Screen five seconds, the previous track displays both map and audio or chapter plays. If playing connector. information. longer than five seconds, the DEL (Delete): Press to delete XM current track or chapter restarts. categories and information from the INFO (Information): Press for hard drive. weather information, if equipped,2. Press and hold to reverse and climate control displays, quickly through playback. VOL/ O (Volume/Power): Press to if equipped. Release the button to return turn the system on and off. Turn this RPT (Navigation Repeat): Press to playing speed. Elapsed knob to adjust the volume for the to repeat the last voice guidance time displays. audio, OnStar, voice guidance, and prompt.V / 0 (Phone): See Bluetooth on voice recognition voice prompts.page 7‑85 for more information. AS1–2 (Autostore): The stations DEST (Destination): Press to that can be received best in an AMk (Play/Pause): Press to start, plan a route through the Select or FM band can be searched forpause, or resume play of the current Destination menu. If route guidance and stored automatically through themedia source. is active, press to access the autostore function. Each band hasTP (Time Program): Press Route menu. See Destination on two autostore lists (AS 1, AS 2), into display the Time settings. page 7‑51 for more information. each of which six stations can beThis button can be pressed to stored. To update station list pressquickly go to the Time menu instead and hold AS 1-2 button for moreof pathing through the Config than two seconds.menu and the TUNE/MENU knob. X (CD/DVD Eject): Press to eject a CD or a DVD.

7-42 Infotainment SystemTouch Screen Buttons A-Z (Alphabet): To select letters Navigation Settings from the alphabet.Touch screen buttons are on thescreen and are highlighted when a Symbols: To select symbols.feature is available. Some screen U (Space): To enter a spacebuttons highlight when active and between characters or the wordsgrey out when inactive. of a name.Alpha-Numeric Keyboard q (Backspace): To delete anLetters of the alphabet, symbols, incorrect character that has beenpunctuation, and numbers, when selected.available, display on the navigation To make name selection easier,screen as an alpha or numeric the system highlights only The Config Menu screen accesseskeyboard. The alpha keyboard characters that are available after the navigation system settings.displays when data needs to be the previously entered one. To access:entered. If a name does not display after 1. Press the CONFIG button toAll characters are touch screen entry, try entering it differently. display the Setup menu.buttons. Touch to select. The map database may not contain 2. Turn the TUNE/MENU knobÀ -Ý (Accent Alphabet): To select all information. to scroll through the availableletters with accent symbols. setup features. Press the TUNE/ MENU knob or press the Nav screen button to display other options within that feature. 3. Select the navigation setting to change.

Infotainment System 7-43Voice Prompt Route Preference Press the Route Preference screen button to change route options when a route is calculated. Voice Guidance: Press toThis menu allows changes to the enable or disable voice guidance.voice features. A checkmark indicates on.The touch screen buttons Speech Confirmationavailable are: Feedback: Press to turn the speech confirmation feedback on Avoid Freeway: Major roads areVoice Volume: Adjust the voice or off. A checkmark indicates on. avoided.volume for guidance and voicerecognition prompts by pressing Traffic Voice Prompt: Press Avoid Toll Road: Toll roads arethe − or + screen buttons or by to enable or disable traffic voice avoided.turning the VOL/ O knob on prompts. If the voice prompts are on Avoid Ferry: Ferries are avoided.the infotainment system. Press and an Alert for Approaching Traffic displays, the related voice prompt is Avoid Time and SeasonalGuidance Volume to previewthe selected sound level. provided. A checkmark indicates on. Restricted Roads: Time restricted and seasonal roads are avoided.

7-44 Infotainment SystemBack Track Map Database Information Off-Road ModePress the Back Track screen Displays map database version When selected, the off-road featurebutton to turn on, off, or delete information. is on. When the off-road mode isthe recording and displaying of turned on, the navigation system willthe traveled path. show the path being traveled by the vehicle when not on a marked road. Weather Warning (If Equipped) When selected, a pop-up screen displays weather warnings. Show 3-D Landmark When selected, 3-D landmarks Press the Coverage button display on the map screen. to view the major metropolitan coverage area. MapsDisplay Back Tracks: Whenactive, the traveled path displays. Low Fuel Warning This section includes basic information about the mapRecord Back Track Points: When When selected, a pop-up screen database.active, the traveled path is recorded. displays gas station icons on the map or lists the five nearest gas Map CoverageDelete Back Track Points: stations.The recorded path is deleted. The navigation maps are stored on Back Track Mode the hard drive. When selected, the back track For more information on map feature is on. See “Back Track” coverage, see “Navigation Settings” earlier in this section. earlier in this section.

Infotainment System 7-45Installing the DVD Map Disc 4. Press the Update screen button Handling the DVD Map Disc when the Update ConfirmationYour dealer installs the map . Handle the disc very carefully to screen displays.database information on the HDD. avoid contamination or flaws. 5. Enter the Authentication Code, Signals might not read outAn updated map disc can be then press Enter. properly.used to update the map databaseinformation. See Ordering Map 6. If the correct code is entered, . Use a soft cloth if the disc getsDVDs on page 7‑76. the system starts updating and soiled and gently wipe it from the the status bar displays. center of the disc to the outside.Before updating the map database Do not use cleaners or solvents.on the HDD, read the following 7. Press X after the mapsteps: database update is completed. . Do not use the disc to rest on1. Turn the vehicle on. while writing or drawing with any If the application update file is writing utensil or attach a seal to included in the disc, the application2. Press VOL/ O to turn the update is also done. any of the sides of the disc. system on. . Do not keep the disc in direct3. Insert the map update disc into sunlight, high temperatures, the slot, label side up. or humidity. . Place the disc back into the original case after use.

7-46 Infotainment SystemMap Adjustments The scale ranges from 100 m . Scroll speed increases when (150 ft) to 400 km (250 mi). touching closer to the edge ofThe scale of view on the map can the screen. To change from metric to English,be adjusted. see Driver Information Center (DIC) . Press NAV on the faceplate toMap Scales on page 5‑43 for more information. exit map scrolling and return to Scroll Features the current vehicle location on the map. . While scrolling the map, this symbol can display the distance to the crosshair area. . To scroll within the map, touchThere are two methods to change anywhere on the map screenthe map scale: and the scroll symbol displays.. Turn the TUNE/MENU knob . Tap the map to center that For example, this shows that the clockwise or counterclockwise location on the screen. map has been scrolled 160 m to zoom out or in. . Press the screen in any direction (0.1 mi) away from the current. Press the Map Scale button on outside the scroll symbol to vehicle position. the left bottom corner of the map scroll the map in that direction. screen to change the zoom level. The map scale bar times out if the zoom level is not changed within a few seconds.

Infotainment System 7-47Navigation SymbolsFollowing are the most commonsymbols that appear on a mapscreen. The waypoint symbol marks This symbol indicates that the map a set waypoint and is numbered view is North-up: North-up displays depending on how many have North at the top of the map screen been set. regardless of the direction the A waypoint is a stopover destination vehicle is traveling. Select this point added to the planned route. screen symbol to change theThe vehicle symbol indicates view to Heading-up or 3-D.the current position and headingdirection of the vehicle on the map. This symbol indicates that the map view is Heading-up.The destination symbol marks the If waypoints have been added Heading-up view displays thefinal destination after a route has to the current route, each waypoint direction the vehicle is travelingbeen planned. destination displays estimated time at the top of the map screen. and distance to the destination. The shaded triangle indicates North.

7-48 Infotainment SystemPress this screen symbol to changeto 3‐D mode.The 3-D symbol is the same as theHeading-up symbol, but the map isin 3-D. This symbol indicates that a menu is available and displays on the left side of the screen. Press this The upper symbol indicates the symbol or the TUNE/MENU knob information can be displayed on to access the screen menu. the right side of the map. The lower symbol indicates the information Driving on a RouteThe No GPS symbol appears can be hidden to show a full screenwhen there is no Global Positioning While driving on a route, the next map view. maneuver the map screen displaysSystem (GPS) satellite signal. is either an urgent maneuver or a non-urgent maneuver.

Infotainment System 7-49Urgent Maneuver Map Screen OptionsAn urgent maneuver is displayed While on route, several options arewhen the next maneuver is less available while viewing the mapthan or equal to 0.8 km (0.5 mi) screen. To access this menu:away on a residential road or lessthan or equal to 1.5 km (2 mi) awayon a highway. Driving on a Residential Road Non-Urgent Maneuver A non-urgent maneuver is when the distance to the next maneuver is greater than 0.8 km (0.5 mi) when driving on a residential Press the TUNE/MENU knob to road or greater than 1.5 km (2 mi) display the menu on the left side. Driving on a Highway when driving on a highway. This See Navigation Symbols on is indicated by a small arrow in page 7‑47 to learn how to change the top right corner of the screen. the map view to North-up, Heading-up, or 3-D view.

7-50 Infotainment System distance and time remaining from the current vehicle position to any of the set waypoints or final destination. Save: Press to save a specific location to the address book.When this symbol is selected, the Show POI: Press to view POIdistance and time remaining from information nearby and on route.the current vehicle position to thefirst waypoint displays. Edit: Press to display a list of POI icons. 1. Select the POI icon to edit. The POI icon is replaced by another icon that is selected from the next menu. There are several Preset options on the bottom of the screen.This menu displays if the symboland waypoints are entered. Selectthe main map view to display the

Infotainment System 7-51 Hide: Press to hide the POIs from Destination view on the map. To display, go to the Map menu, press the Show POI While destination is not set, press Icons menu and press the Show the DEST button to access the option. See “Map Screen Options” Select Destination screen. Several earlier for more information on options can be selected to plan a showing the POIs. route by entering destinations.2. Select the new POI icon.3. The new icon is on the Show POI Icons menu.List: Displays all available POIs.Clear: Clears all selected POIs. Press this button to change the full map screen to the half map screenNearby: Displays up to 200 of the and half exit information. Address Entryselected POIs within 32 km (20 mi)of the current vehicle position. Traffic: Press to provide nearby Set a route by entering theThe POIs can be sorted by traffic information and traffic events state/province name, city name,distance, icon, or type. on the planned route. street name, and house number. Whole Route: Press to choose State/Province: Enter a options for the entire route. state/province name. Cancel Guidance: Press to cancel City: Enter a city name. guidance of the current route. Street Name: Enter a street name. House #: Enter a valid address number.

7-52 Infotainment SystemCross Street Name: Enter a street 3. Enter the city name. The city 7. Press Go located on thename that intersects with the field is automatically selected. confirmation screen if theselected street. 4. Enter the street name. This field information is correct.A checkmark displays on the is automatically selected. Do not The route is calculated.right side when the field has been enter directional information 8. Select the route preference forselected and the destination can or street type. Use the space Fastest, Shortest, or Easiest.be entered. After an entry step is screen button between street The chosen route preferencecompleted, the checkmark moves and city names. Use the highlights. See “Entering anto the next item. backspace q screen button to Address and Point of Interest, delete an incorrectly entered and Storing Preset Destinations” character. under Overview on page 7‑3 for more information. A list displays if four or fewer names are available. If there 9. Press the Start Guidance are more than four, there is a screen button and the route match counter with a number is calculated. of available streets. Press the Entering the street name first: List screen button to view the list and select the street. 1. Press the DEST button. 5. Enter the house number. 2. If necessary, enter theEntering the city name first: This field is automatically state/province name.1. Press the DEST button. The last state/province selected.2. If necessary, enter the name is automatically 6. Press the OK screen button. recalled. state/province name. The last The address information screen state/province is automatically displays the address entered. recalled.

Infotainment System 7-533. Select the street name field. 7. Press Go located on the Point of Interest Enter the street name. Do not confirmation screen if the The POI destination entry allows enter directional information information is correct. selection of a destination by or street type. Use the space The route is calculated. providing the POI name or city screen button between street name, or selecting from the POI list. and city names. Use the backspace q screen button to Entering by POI name/phone delete an incorrect character. number: A list displays if four or fewer 1. Press the DEST button. names are available. If there 2. Select Point of Interest. are more than four, there is a match counter with a number of available streets. Press the List screen button to view the 8. Select the route preference for list and select the street. Fastest, Shortest, or Easiest.4. Select the city from the list or The chosen route preference enter the city name. highlights. See “Entering an5. Enter the house number. Address and Point of Interest, This field is automatically and Storing Preset Destinations” selected. under Overview on page 7‑3 for more information. 3. Enter the name or select by6. Press the OK screen button. phone number. 9. Press the Start Guidance screen button and the route is calculated.

7-54 Infotainment System A list displays if four or fewer 5. Enter the new state and city. names are available. If there 6. Select a category, then a are more than four, there is a sub-category. match counter with a number of available POI names. Press The available POI names will the List screen button to view display. the list. 7. Select the POI name.4. Select the POI name from 8. If the POI is correct, press the the list. Go screen button. The route is 4. Select a category, then a5. Press Go located on the calculated. sub-category. confirmation screen if the 9. Select the route preference for information is correct. The available POI names Fastest, Shortest, or Easiest. display.6. Select the route preference for 10. Press the Start Guidance Fastest, Shortest, or Easiest. 5. Select the POI name. screen button and start the7. Press the Start Guidance screen route. 6. If the POI is correct, press the button and start the route. Go screen button. The route is Selecting from a POI Category: calculated.Entering a POI by city name: 1. Press the DEST button. 7. Select the route preference for1. Press the DEST button. 2. Select Point of Interest. Fastest, Shortest, or Easiest.2. Select Point of Interest. 3. Press the Browse screen button. 8. Press the Start Guidance screen3. Press the Browse screen button. button and start the route.4. Select the Change Location screen button.

Infotainment System 7-55Previous Destination 4. Press Go located on the Address Book confirmation screen if theSelect a destination from a list Choose a destination by selecting information is correct.of previous destinations. Up to an address that has been stored in The route is calculated.15 points that have been previously the address book.entered can be recalled. If the list 5. Select the route preference for 1. Press the DEST button.is full, the oldest destinations are Fastest, Shortest, or Easiest.automatically deleted once the See “Entering an Address andnewest destinations are added. Point of Interest, and Storing Preset Destinations” under1. Press the DEST button. Overview on page 7‑3 for2. Press Previous Destination. more information. A list displays the previous 6. Press the Start Guidance screen destinations. button and start the route.3. Select the destination. 2. Press Address Book. A list displays the address book entries.

7-56 Infotainment System3. Select the destination from 3. Press the Zoom in/out arrow Lat/Long Coordinates the list. key on the screen and press the Choose a destination based4. Press Go on the confirmation map to locate the destination to on latitudinal and longitudinal screen if the information is select. Press and hold a finger coordinates. correct. The route calculates. on the map to activate fast scrolling.5. Select the route preference for Fastest, Shortest, or Easiest. 4. Press Go on the confirmation See “Entering an Address and screen if the information is Point of Interest, and Storing correct. The route calculates. Preset Destinations” under 5. Select the route preference for Overview on page 7‑3 for Fastest, Shortest, or Easiest. more information. See “Entering an Address and6. Press the Start Guidance screen Point of Interest, and Storing button and start the route. Preset Destinations” under Overview on page 7‑3 for Enter the location as coordinates,Pick From Map more information. latitude and longitude.Select a destination by scrolling on 6. Press the Start Guidance screen 1. Press the DEST button.the map. button and start the route. 2. Press the Lat/Long screen1. Press the DEST button. button.2. Press the Pick From Map screen button. A map screen with a scroll symbol displays.

Infotainment System 7-573. Enter the coordinates for the to use. See “Entering an Address Getting Started on the Route destination in degrees, minutes, and Point of Interest, and Storing Several functions can be performed and seconds. Preset Destinations” under after a destination has been4. Press Go on the confirmation Overview on page 7‑3 for entered. Press the DEST button to screen if the information is more information. access the Route Menu screen. correct. The route calculates. 1. Press the DEST button.5. Select the route preference for 2. Select one of the available Fastest, Shortest, or Easiest. preset destination screen See “Entering an Address and buttons. The screen buttons Point of Interest, and Storing were stored with the name Preset Destinations” under selected. The route is Overview on page 7‑3 for calculated. more information. 3. Select the route preference for6. Press the Start Guidance screen Fastest, Shortest, or Easiest. button and start the route. See “Entering an Address and Cancel Guidance Point of Interest, and StoringPreset Destinations Preset Destinations” under From the Route Menu screen,Set a destination by selecting Overview on page 7‑3 for press Cancel Guidance to cancelfrom one of six previously stored more information. the current route. Press Yes on thedestinations. If a destination is not confirmation screen to cancel or No 4. Press the Start Guidance screen to continue the guidance.set for one of the screen buttons, button and start the route.the button dims and is not available

7-58 Infotainment SystemVoice Prompt Turn List WaypointsSelect Voice Volume to change thevolume of voice prompts and voicerecognition.Select the Voice Guidance, SpeechConfirmation Feedback, or TrafficVoice Prompt screen buttons to turnvoice prompts on or off for eachcategory. See “Navigation Settings”under Using the Navigation Systemon page 7‑39 for more information. To view the list of maneuvers for the Up to three waypoints can be addedDetour entire route, select Turn List from to the current route, between the the Route Menu screen. start point and final destination.While on the surface streets, The waypoints can be edited orselect a detour around the current deleted.route, select the Route screen,then select to detour 2, 5, or To add a waypoint:10 km (1, 3, or 5 mi). While 1. Press the DEST button.on the highway, select to detour2, 5, or 10 km (5, 15, or 25 mi). 2. Press the Add Waypoint screenSelect Whole Route to detour the button. This button is onlyentire route. This is only available available if the route has beenwhile driving on a route. calculated.

Infotainment System 7-593. Enter the waypoint by any of the To delete a waypoint: Route Preview add destination methods. See 1. Press the DEST button. Preview the entire route in either Destination on page 7‑51 for 2. Press the Delete Waypoint direction. more information. The system calculates and highlights the screen button. route and the route can be 3. Select the waypoint to be started. deleted by touching the screen.4. To add more waypoints, press 4. A confirmation message the DEST button. Press the displays. Press the Yes Add Waypoint screen button screen button to delete the to add the waypoint in the waypoint; press No to cancel order desired on the route. this operation. The system The system calculates and calculates and highlights the highlights the route and the route and the route can be s t (Reverse or Forward Skip): route can be started. started. . Press the reverse skip arrow to go to the start point. . Press the forward skip arrow to go to the final destination.

7-60 Infotainment System . Address Entry: Enter au v (Fast Reverse or Forward Previous Destinations — destination through theScroll): Deleting Address Entry menu. Press the. Press the fast reverse scroll To delete all previous destinations Go screen button. The Save arrow to go to the start point. from the system: screen button displays at the. Press the fast forward 1. Press the DEST button. bottom of the screen. Press the scroll arrow to go to the final Save screen button to save this 2. Press the Previous Destination location to the address book. destination. These buttons screen button. display once the reverse/forward . POI Menu: Select a POI. Press scroll button has been selected. 3. Press the Clear All screen Save located at the bottom of button. the information page display.S T (Reverse or Forward Scroll): 4. Press OK to Clear All Previous . Previous Destination: From. Press the reverse scroll arrow to Destinations, or press the go to the start point. the Previous Destination Menu, Cancel screen button to select the destination to save.. Press the forward scroll arrow to cancel this operation. Press Save located at the go to the final destination. bottom of the information page. Address Bookj (Pause): Pauses the route Options for saving to the To change the map icon of anpreview, while in reverse, fast address book entry: address book:reverse, forward, or fast forwardscroll. . Scrolling on map or Pick from 1. Press the DEST button. Map in the Dest Menu: Scroll 2. Press the Address Book screenSuspend/Resume Guidance to the location. Press the button. A list displays thePress the Suspend/Resume TUNE/MENU knob on the address book entries.Guidance screen button to suspend faceplate. A menu displays on the left side of the screen. 3. Select the address book entry toor resume guidance on the currentroute. Press the Save screen button be changed. and the location is saved. 4. Press Edit, located on the bottom of the screen.

Infotainment System 7-61 5. Press the Change Name option. To add a voice tag to an address 6. Use the alpha keyboard to enter book entry: the name. 1. Press the DEST button. 7. Press the OK screen button to 2. Press the Address Book screen save the changes. button. A list displays the To add or change the phone number address book entries. of an address book entry: 3. Select the address book entry to 1. Press the DEST button. be changed.5. Press Change Icon. 2. Press the Address Book screen 4. Press Edit, located on the6. Select an icon from the list. bottom of the screen. button. A list of address book7. Press the OK screen button to entries displays. 5. Press the Add Voice Tag screen save the changes. button. 3. Select the address book entry toTo edit the name of an be changed. 6. Speak the name after theaddress book: beep and within four seconds. 4. Press Edit, located on the1. Press the DEST button. bottom of the screen. The name is repeated back.2. Press the Address Book 5. Press the Change Phone To delete an address book entry: screen button. A list displays Number option. 1. Press the DEST button. the address book entries. 6. Use the numeric keyboard to 2. Press the Address Book screen3. Select the address book entry to enter or change the phone button. A list displays the be changed. number. address book entries.4. Press Edit, located on the 7. Press the OK screen button to bottom of the screen. save the changes.

7-62 Infotainment System3. Select the address book entry to Favorite Route To change the route name: be deleted. 1. Select Change Route Name. 1. After the route has been4. Press the Delete Entry screen planned, press the NAV button 2. Using the keypad, enter button. A confirmation message until the full map screen is the name. displays. shown. 3. Select the Favorite Route entryTo add a preset destination from the 2. Press the TUNE/MENU knob. to be edited.address book: A menu displays. 4. Press the OK screen button.1. Press the DEST button. 3. Scroll down and select Whole The new name will be in the2. Press the Address Book screen Route. The whole route map Favorite Route Menu. button. screen displays. To add a voice tag:3. Select the address book entry to 4. Press the Add Route screen button. The route is stored as 1. Press the Add Voice Tag screen add as a preset. The Address button. Book Information screen a favorite. displays. To change the route name, add a 2. Speak the name after the beep voice tag, or delete a favorite route: within four seconds. The name is4. Press Edit, located on the repeated back. bottom of the screen. 1. Press the DEST button. To delete a favorite route:5. Press and hold one of the 2. Press the Fav Route screen six screen buttons at the bottom button. 1. Press Delete Favorite Route. of the screen until the text within The confirmation screen 3. Select the route. displays. the button changes. 4. Press Edit, located on the 2. Press the Yes screen button to6. The name appears in that preset bottom of the screen. delete the route or press No to destination screen button and can be selected from the Select 5. Select from: Change Route cancel from deleting the route. Destination screen. Name, Add Voice Tag, or Delete Favorite Route.

Infotainment System 7-63Menu Screen Button Map Heading Show POI: Press to display POI icons to be shown on the map. Select from a list of six pre-programmed POI sub-categories. Scroll through a list of categories, or select nearby and on route options.Various navigation system settingsare available through the Menuscreen button. Some options areonly available after a route is Press to change the view to Press this screen button to minimizeplanned. North-up, Heading-up, or 3-D mode. the guidance window and expand1. Press the NAV button to view See Navigation Symbols on the map window. the Map screen. page 7‑47 for more information. Whole Route: Press to view the2. Press the Menu screen button Traffic: Press to view the Traffic entire route from starting point to or the TUNE/MENU knob on the Information screen. See Configure destination on the map. faceplate. Menu on page 7‑66 for more Cancel Guidance: Press to stop information. the current route. Save: Press to save a location to the address book.

7-64 Infotainment SystemOnStar® Destination Using Destination DownloadDownloadThe OnStar Destination Downloadlets an OnStar subscriber askan OnStar Advisor to downloada destination to the navigationsystem. OnStar will send addressinformation and location coordinatesof the destination into the navigation In this case, “Using Coordinates”system. displays on the downloaded screen. The navigation system displays a If the system is unable to locate the “Please wait” as the address is address, the Destination Not Found searched within the map database. screen displays. If the address is not found within the map database, the system may use latitude and longitude coordinates to locate the destination. OnStar Destination Download Screen

Infotainment System 7-65Route Guidance Not Active . Press the Save screen button; Route Guidance Active the navigation system copiesIf an OnStar destination is the downloaded destination to If an OnStar destination isdownloaded while route guidance the address book and displays downloaded while route guidance isis not active, the navigation system the new address book entry. already active, the system displaysdisplays a pop-up screen and the The destination saves this a pop-up screen and the followingfollowing available screen functions: download even if it is only available screen functions:. Press the Go screen button; the partial information such as . Press the Go screen button; navigation system starts route a phone number. the navigation system adds the calculation to the destination(s) . Press the Back screen button; downloaded destination before received. the navigation system cancels the next waypoint of the existing. Press the Map screen button; OnStar Destination Download route (closest to the current the navigation system displays and returns to the previous vehicle position). the Destination Map screen. screen. The downloaded . All other buttons on the pop-up address is not added to screen operate as described. Press the Call screen button; the previous destinations. under “Route Guidance Not the navigation system initiates a call with Bluetooth Phone Active.” (if available) or OnStar Hands-Free Calling.

7-66 Infotainment SystemPrevious Destinations Configure Menu Nav (Navigation)Previously downloaded OnStar Adjust features and preferences Press the CONFIG button todestinations are saved under through the Configure Menu. enter the Menu options. Turn thePrevious Destinations in the The last selected menu screen TUNE/MENU knob to scroll throughnavigation system where they displays. Adjust features for Sound, the available menu options. Presscan be accessed or saved to Radio, Nav (navigation), Display, the TUNE/MENU knob or press thethe address book. or Time. Nav screen button.Map Destination Screen Functions Radio XM NavTraffic® (if equipped) Press the CONFIG button to The navigation system might enter the Menu options. Turn the have an XM NavTraffic receiver. TUNE/MENU knob to scroll through It is a subscription service provided the available menu options. Press through XM Satellite Radio. the TUNE/MENU knob or press A service fee is required to Radio to display the radio settings. receive the XM NavTraffic service. Press this feature to make changes Real-time traffic information is for radio information displayed, provided to fully integrate the preset pages, Auto Volume, Audio navigation system to display Destination Map Screen current traffic conditions for Cue Options, and XM CategoriesIf the map screen is used to show Restore. See Satellite Radio on the chosen route.destination, it has map screen page 7‑16 for more information. A screen displays to indicate if thecapabilities such as Go, Save, XM NavTraffic subscription is notZoom, Scroll, etc. The address is activated.shown at the top of the screen.

Infotainment System 7-67If activated, traffic information To turn XM NavTraffic on or off: Traffic Icondisplays: 1. Press the CONFIG button to When traffic conditions are found. Unscheduled traffic incident enter the menu options. Turn in the local area, the Traffic Icon data, such as accidents and the TUNE/MENU knob to scroll appears in the lower left side of disabled vehicles. through the available menu the map.. Scheduled traffic incident data, options. Press the TUNE/MENU such as road construction and knob or press the Nav screen road closures. button to display the other navigation settings.. Traffic flow information (rate of speed data). Flow data might not 2. Press the Traffic Information be available in all markets. button.Traffic information is delivered to the 3. Press the Traffic screen button.vehicle by the XM Radio satellites. This button highlights and aXM NavTraffic provides continuously checkmark displays when active.updated traffic information. Selecting Alert for Approaching The Traffic Icon has three different Traffic Events displays a screen condition displays. These are:XM NavTraffic currently broadcaststhe traffic information for many to notify of possible traffic events . No icon displays if there is nomarkets nationally. The service may ahead. XM NavTraffic subscription orbe available in more cities in the there are no traffic events.future. Visit www.xmnavtraffic.com . A single car icon displays iffor more details on local coverage. there are traffic events in the area, but none are on route. . A multiple car icon displays if there are traffic events on the route.

7-68 Infotainment SystemIt could take some time to sort the 2. Scroll down and press the Trafficreceived information. The list of screen button. A list of traffictraffic conditions displays in the conditions with distance fromorder of distance from the vehicle, the vehicle’s current positionfor up to approximately 125 km displays.(75 mi). With a route planned, An arrow may appear before thetraffic events display on the route. distance. The arrow indicatesNot all traffic conditions may display. the distance is a straight line distance and the direction of the event from the vehicle’s current 3. Select a traffic condition to get position. If no arrow appears, the more detailed information. distance indicates how far the event is ahead on current route. No more than three pages of traffic events may be viewed while the vehicle is moving.To view the traffic condition locationand information on the map:1. Press NAV to show the map, then press the TUNE/MENU Select Options. A Traffic Options knob for the map menu. menu displays. Select the traffic-related option.

Infotainment System 7-69Traffic: Press to enable or disable Traffic Flow Status — Enables or Traffic flow data arrows displaythe traffic function. disables the green, yellow, red, and on the map when scaled up to black arrows that display beside the eight miles. For Closed Road, Traffic roads and shows the traffic flow or Delays, Incidents, and Advisories, extent of a traffic event. select the traffic event icon that . Black indicates a closed road appears on the map screens. segment. Alert For Approaching Traffic . Red indicates significantly Events: When On, if an impaired traffic flow with approaching traffic event is within average speed of less than the alert range, one of two traffic 40 km/h (25 mph). alerts displays: . Yellow indicates slightly . With no route planned, while onShow Traffic ICONs: Press to impaired traffic flow with average expressways, the Approachingdisplay traffic icons on the map speed between 40 km and Traffic Event without Avoidscreen. Also, select what traffic 73 km/h (25 and 45 mph). screen displays.information displays. . With a route planned, the Traffic . Green indicates normal traffic flow with average speed above Event on Route screen displays. 73 km/h (45 mph). If the Alert For Approaching Traffic Events is Off, the alert does not display.

7-70 Infotainment SystemOn Route Scrolling to Traffic Events on o (Stopped Traffic): Traffic the Map stopped, stop-and-go traffic, While scrolling the map, the traffic delayed and congested traffic. event icons can appear indicating a p (Alert): Object on the roadway, traffic event within 125 km (75 mi) disabled vehicle, or dangerous road from current position. To receive conditions. information about the traffic event, place the crosshairs over the t (Accident): Roadway obstructed traffic condition icon. Traffic events due to accident. beyond 125 km (75 mi) from current s (Road Work): Delayed traffic position will not be displayed. due to construction.Press the On Route screen buttonto display all events ahead on Press the Info. button to display the j / r (Road Condition): Delayedthe current active route. No traffic type of traffic, the street name, and or stopped traffic, lane blocked orevents reported on route displays a description of the traffic event. closed due to a road condition.if there are none to report. k (Weather): Heavy rain, snow, Traffic Event Display CategoriesName or fog weather condition. The following are traffic eventPress the Name screen button to categories and symbols that m (Parking): Availabledisplay traffic events in alphabetical can appear on the display: parking area.order. q (Road Closed): Road and/or l (Information): Special event,Distance ramps closed. general information, or warning.Press the Distance screen buttonto display traffic events in order ofdistance with the closest eventshown first.

Infotainment System 7-71Traffic Event Information Back, Map, More, and Avoid Traffic Voice Prompts The traffic voice prompt can be turned on and off by selecting Traffic Voice Prompt in Voice Prompt on the CONFIG Nav screen. If the voice prompts are on and an Alert for Approaching Traffic displays, the related voice prompt is provided. The RPT (Repeat) button doesUse to display additional details These buttons have common not repeat traffic prompts, onlyof a traffic event. This screen can functions across all Detailed navigation traffic maneuvers.display when: Traffic Event screens. The current prompt playback. Scrolling to an event on the map Back: Return to the previous cancels if RPT is pressed during and then pressing Info. screen. a traffic voice prompt.. Selecting a traffic event listed on Map: Display related traffic events Traffic prompts are disabled during the Traffic Event List screen. on the map if available. OnStar or Voice Recognition activity.. Approaching a traffic event. More: View more information for the traffic event. Avoid: Avoid the location of an event on the route and calculate a new route. The full map screen shows the new route. The Avoid button is only available if the event is on the route ahead.

7-72 Infotainment SystemAlternate Route Traffic Condition SymbolsWhen Alternate Route Available The following traffic conditiondisplays, a possible quicker route symbols may display:is available and can be selected todetour around the traffic condition.Press the Yes screen button and thenew route is calculated. This option Lane Narrows Roadis only available when the multiple Constructioncar icon appears.XM NavTraffic information might not Stopped Traffic Traffic Jambe provided for the alternate route,depending on what type of road thevehicle is traveling on. Alert Road Condition Accident Road Closed Road Visibility Other

Infotainment System 7-73XM™ Weather Extended Forecast From the XM Weather Menu(where available) Screen, press Along the Route:Press INFO, then press it againuntil the Weather screen buttonis selected or press the Weatherscreen button.Current ConditionPress INFO until the Weatherscreen button is selected to showthe current weather condition in the Enter the weather menu by pressingcity of the vehicle’s current position. the TUNE/MENU knob or press Weather Alerts the Menu button on the screen. From this screen, press Extended From the XM Weather Menu, press Forecast. Weather Alerts to display any current weather advisory warnings Weather Along the Route in effect near the current position. If a destination is set, there is the option to view weather conditions for up to three locations along the route:Allow up to 15 minutes for the . Current vehicle position.current weather in the area to . Midway point from currentdisplay. position to final destination. . Current weather condition of the destination city.

7-74 Infotainment SystemDisplay Night: The map background Display: Press Display to turn the darkens. display of the time on the screen on To change the overall brightness or off. setting for the display, use the vehicle interior lighting dimming Global Positioning control. System (GPS) Setting the Clock The position of the vehicle is determined by using satellite To set the time: signals, various vehicle signals, 1. Press the TP (Time Program) and map data.Press the CONFIG button to button to go directly to the At times, other interferences suchenter the menu options. Turn the time setting page or press the as the satellite condition, roadTUNE/MENU knob to scroll through CONFIG button and select configuration, the condition of thethe available setup features. Press Time from the list. vehicle, and/or other circumstancesthe TUNE/MENU knob or press the 2. Press + or – to decrease or can interfere with the navigationDisplay screen button to display increase the Hours and Minutes systems ability to determine theother options within that feature. displayed on the clock. accurate position of the vehicle.Dimming Mode 12/24 HR Format: Press the 12 HR The GPS shows the current position screen button for standard time; of the vehicle using signals sent byAuto (Automatic): The screen press the 24 HR screen button for the GPS Satellites of the Unitedbackground automatically adjusts military time. States Department of Defense.depending on exterior lightingconditions. Day + or Day –: Press the day + or day – display buttons to increase orDay: The map background decrease the day.brightens.

Infotainment System 7-75 . The vehicle changes directionsWhen the vehicle is not receiving Vehicle Positioning more than once, or the vehiclesignals from the satellites, a symbolappears on the map screen. See At times, the position of the vehicle is turning on a turn table in aNavigation Symbols on page 7‑47. on the map could be inaccurate parking lot. due to one or more of the followingThis system might not be available . The vehicle is entering and/or reasons:or interferences can occur if any of exiting a parking lot, garage,the following is true: . The road system has changed. or a lot with a roof. . The vehicle is driving on slippery . The GPS signal is not received.. Signals are obstructed by tall buildings, trees, large trucks, road surfaces such as in sand, . A roof carrier is installed on the or a tunnel. gravel, and/or snow. vehicle.. Satellites are being repaired or . The vehicle is traveling on . Tire chains have been installed. improved. winding roads or long straight roads. . The tires are replaced or worn.For more information if the GPSis not functioning properly, see . Approaching a tall building or a . The tire pressure for the tires is“If the System Needs Service” and large vehicle. incorrect.“Problems with Route Guidance.” . The surface streets run parallel . This is the first navigation use to a freeway. after the map data is updated. . The vehicle has been transferred . The 12-volt battery is by a vehicle carrier or a ferry. disconnected for several days. . The current position calibration . The vehicle is driving in heavy is set incorrectly. traffic where driving is at low speeds, and the vehicle is . The vehicle is traveling at high stopped and started repeatedly. speed.

7-76 Infotainment System . The route prohibits the entryProblems with Route of a vehicle due to a regulation Ordering Map DVDsGuidance by time or season or any other The map data in the vehicle isInappropriate route guidance can regulation which may be given. the most up-to-date informationoccur under one or more of the available when the vehicle was . Some routes might not befollowing conditions: produced. The map data is updated searched. periodically, provided that the map. The turn was not made on the . The route to the destination information has changed. road indicated. might not be shown if there For questions about the operation of. Route guidance might not be are new roads, if roads have the navigation system or the update available when using automatic recently changed, or if certain process, contact the GM Nav Disc rerouting for the next right or roads are not listed in the map Center toll‐free phone number, left turn. data. See Maps on page 7‑44 1‐877‐NAV‐DISC (1‐877‐628‐3472) for more information.. The route might not be changed or go to the centers website, when using automatic rerouting. To recalibrate the vehicles position www.gmnavdisc.com. If updates on the map, park with the vehicle are needed, call the GM Nav Disc. There is no route guidance when on for two to five minutes, until the Center or order a new disc online. turning at an intersection. vehicle position updates. To order a disc, have the vehicles. Plural names of places might be Vehicle Identification Number (VIN) announced occasionally. If the System Needs available. See “Vehicle Identification Service Number (VIN).”. It could take a long time to operate automatic rerouting If the navigation system needs After receiving the updated disc, during high-speed driving. service and the steps listed here see “Installing the DVD Map Disc” have been followed but there are under Maps on page 7‑44 for more. Automatic rerouting might still problems, see your dealer for information. display a route returning to the set waypoint if heading for a assistance. destination without passing through a set waypoint.

Infotainment System 7-77Database Coverage Voice Recognition Using Voice RecognitionExplanations The navigation systems voice 1. Press and release the b gCoverage areas vary with respect to recognition allows for hands-free steering wheel button. The audiothe level of map detail available for operation of the navigation system system mutes, and a beep isany given area. Some areas feature and the audio system features. heard. A voice prompt stating,greater levels of detail than others. Voice recognition only works if the “Please start speaking after theIf this happens, it does not mean map database is installed in the beep” might be heard.there is a problem with the system. system. If there is no beep, make sureAs the map data is updated, more If the radio is off, the only that the voice volume setting isdetail can become available for commands would be Hands not turned down. See Configureareas which previously had limited Free and Help. Menu on page 7‑66 for moredetail. See Ordering Map DVDs on information.page 7‑76 for more information. Navigation voice commands are not available until the I Agree button While voice recognition is active, has been selected. the system displays a g symbol. Voice recognition can be used when 2. Clearly speak one of the the vehicle is on or when Retained commands listed later in this Accessory Power (RAP) is active. section. See Retained Accessory Power (RAP) on page 9‑22 for more information.

7-78 Infotainment SystemCanceling Voice Recognition Helpful Hints for Speaking . When the system does not Commands recognize the command,1. Press and release the $ i the system issues an error steering wheel button to cancel . When multiple commands are message such as “pardon” a command, or if the system available, choose the command or “command not recognized.” response does not match the that best works for you. The system could also say, verbal command. . Words that are in brackets are “voice recognition canceled.”2. The system replies, “Voice optional. For example, for the . If experiencing difficulty with the recognition canceled.” command “Radio (band) FM,” system recognizing a command, saying “Radio FM” or “Radio confirm that the command is Pressing any other radio or Band FM” are both valid correct. Try saying the command steering wheel control, other commands. clearly or wait for a brief moment than the volume knob or the . Words separated by a ( / ) mean after the beep. volume steering wheel button cancels the session. there is a choice of using a . Background noise such as a word on either side of the slash. climate control fan positioned3. Press and release the b g For example, for the command on high, open windows, and steering wheel button to restart (CD/DVD/Disc) (help), you can very loud outside noises, even the voice recognition session. say “CD (help)” or “DVD (help)” if the windows are closed, can or “Disc (help).” cause voice commands to be . When the system recognizes the misunderstood. command, the system will either perform the function or ask to confirm the choice by clearly saying “yes” or “no.”

Infotainment System 7-79. This system is able to recognize Voice Recognition Help Display (help): The system plays commands in different back helpful advice about display languages, such as English, To enter the help playback session, commands, and some common French Canadian, and Spanish. clearly speak one of the help display commands which are The system only recognizes commands. available to adjust the display commands based on the Help: The system plays back setting. language selected. more specific help commands Navigation (help): The system. To increase or decrease the (such as Radio Help, Display Help, plays back helpful advice about voice volume during a voice Navigation Help) for the user to navigation commands, and some recognition session, turn choose from. common navigation commands the volume knob of the radio, Radio (help): The system plays which are available. or press the volume steering back helpful advice about radio wheel buttons. If the volume commands, and some common Voice Recognition Commands is adjusted during a voice radio commands which are The following list shows the recognition session, a Voice available. Use this command voice commands available for Volume bar appears on the to learn about how to select a the navigation system with a brief screen showing the voice band (AM, FM, or XM), and how description of each. The commands volume level as it is being to change radio stations (by are listed with the optional words adjusted. This also changes speaking frequency numbers). in brackets. To use the voice the volume of the guidance commands, see the instructions prompts. (CD/DVD/Disc) (help): The system plays back helpful advice about listed previously. disc commands, and some common disc commands which are available. Use this command to learn about how to select Disc mode playback, and how to change track numbers.

7-80 Infotainment SystemDisplay Commands Radio Commands CD/DVD/Disc CommandsDisplay (set) day (mode), Radio AM, radio (band) AM, The following commands are onlydisplay (select) day (mode): radio FM, radio (band) FM, available when a CD, MP3, or DVDThis command instructs the system radio XM, radio (band) XM: is loaded:to switch the display to day mode. These commands instruct the Radio CD, radio DVD, radio disc:Display (set) night (mode), system to go to either the AM, These commands instruct thedisplay (select) night (mode): FM, or XM radio bands. system to go to Disc mode.This command instructs the system Radio select (frequency) AM, Radio CD select (track number),to switch the display to night mode. radio select (frequency) FM: radio DVD select (track number),Display (set) auto (mode), These commands instruct the radio disc select (track number):display (select) auto (mode): system to go to a specific frequency These commands instruct theThis command instructs the system on either the AM or FM band. system to play a specific track onto switch the display to auto mode. For example, radio select ninety the disc. For example, radio disc seven point one FM or radio select select ten. This command supportsDisplay (help): This command ten forty AM.instructs the system to play back up to 254 tracks.helpful advice about display Radio select (channel) XM: CD (help), DVD (help), disccommands, and some common This command instructs the (help): This command instructsdisplay commands which are system to go to a specific channel the system to play back helpfulavailable to adjust the display on the XM band (if equipped). advice about disc commands, andsetting. For example, radio select one some common disc commands fifty one XM. which are available. Radio (help): This command instructs the system to play back some helpful advice about radio commands, and some common radio commands which are available to the user.

Infotainment System 7-81General Navigation Commands Point of Interest (POI) Navigation show ATM(s), Commands navigation hide ATM(s): TheseFeedback on, feedback off: commands instruct the system toThis command instructs the The following is a list of POI display and hide ATM POIs on thesystem to turn on and off the commands. POIs only display on map screen.voice recognition feedback. the map screen if the map scaleWhen feedback is ON, the system is 800 m (0.50 mi) or less. If POIs Navigation show hotel(s),responds to commands with a talk display on a map with the wrong navigation hide hotel(s): Theseback phrase. When feedback is scale, the system reminds that this commands instruct the system toOFF, the system responds to cannot be done. The available POI display and hide hotel POIs on thecommands with a chime. commands are: map screen.Navigation voice (guidance) on, Navigation show gas station(s), Navigation show airport(s),navigation voice (guidance) off: navigation show gas, navigation navigation hide airport(s): TheseThis command instructs the system hide gas station(s), navigation commands instruct the system toto turn on and off voice guidance hide gas: These commands display and hide airport POIs on theprompts during route guidance. instruct the system to display and map screen.Cancel: This instructs the system hide gas station POIs on the map Navigation show shop(s),to cancel the command. screen. navigation show shopping, Navigation show restaurant(s), navigation hide shop(s), navigation show dining, navigation hide shopping: These navigation hide restaurant(s), commands instruct the system to navigation hide dining: These display and hide shopping POIs on commands instruct the system to the map screen. display and hide restaurant POIs on the map screen.

7-82 Infotainment SystemDestination and Guidance If the destination to be entered is inCommands the displayed state, then say the desired city name. Otherwise, sayNavigation (go to) preset “Change State” and say the statedestination (number) (one, two, name the search should take placethree, four, five, or six): These in. Then, say the desired city namecommands instruct the system to when prompted, and say the desiredset one of the preset destinations street name and house numberone through six as the new when prompted.destination. To set a destination using voice For example, if the desiredNavigation delete: This command recognition: destination is in Ohio, but theinstructs the system to delete the system shows New York (NY)destination, route, or next waypoint. 1. Press and release the b g in the pop-up banner, sayThe system requests a confirmation steering wheel control. “Change State.”of which item should be deleted The audio system mutes,(destination, route, or next 3. After saying “Change State,” the and a beep is heard. system replies with “Please saywaypoint). 2. Say the command “Destination.” state name.” Say the correctDestination (available for English The system replies with “Please state.language only): This command say city name or change state,”instructs the system that the and the system shows a pop-upuser wants to enter a destination banner of an abbreviated stateusing voice recognition. After this name, such as NY for New York.command is stated, the system If the state is correct, then go todisplays a state abbreviation Step 4. Otherwise, say “Change(such as NY for New York). State.”

Infotainment System 7-83 5. Reply with the street name Voice Tag Commands including the suffix (Blvd, Ave, Voice tags are recorded phrases Rd, etc.), when prompted. that can be stored in the navigation The radio might display a system. These voice tags are candidate list with the closest associated with address book matches to the spoken street entries, and once these voice tags name. Say the correct are stored, they can be used as street name. part of a voice recognition command 6. Reply with the house number that sets the particular address book The state name displays. when prompted. The radio might entry as a destination. See “Address In some cases the radio shows display a candidate list with the Book” earlier in this manual for a candidate list with the closest closest matches to the spoken information about instructions on matches to the spoken state house number. Say the house how to store a voice tag in the name. The system asks the number as a single digit. system. user to select an item from the candidate list either by pressing 7. Confirm the correct address is Navigation (go to) (voice tag): the desired choice, or by saying displayed, then reply with yes This command allows selection of a the list number of the desired or no, when prompted. destination saved under the stored choice. 8. This address is now set as voice tag. The system plays back the destination. Select the the voice tag and asks to confirm4. The system asks the user by saying yes or no. to say the city name. As shown Start screen button to begin earlier, the radio can display a destination guidance. If a destination is set to “Home,” say candidate list with the closest “Navigation go to Home.” After the matches to the spoken city system plays back the voice tag name. Say the correct and it is confirmed, the system city name. sets “Home” as the destination.

7-84 Infotainment SystemOnStar (if equipped) Command CD/DVD/Disc Commands Navigation hide Radio (CD/DVD/Disc) (dining/restaurant/restaurants)Hands Free: This command Radio (CD/DVD/Disc) select Navigation hide (ATM/ATMs)instructs the system to enter the <track number> Navigation hide (hotel/hotels)OnStar voice recognition system.See “Hands-Free Calling” in the General Navigation Commands Navigation hide (airport/airports)OnStar Owners Guide for more Feedback On Navigation hideinformation. Feedback Off (shop/shops/shopping) Navigation voice (guidance) on Destination and GuidanceHelp Commands Navigation voice (guidance) off Commands Help (cancel/goodbye/quit) Navigation (go to) preset Radio (help) CD (help), DVD (help), Point of Interest (POI) Commands destination (number) one Disc (help) Navigation show Navigation (go to) preset Display (help) (gas/gas station/gas stations) destination (number) two Navigation (help) Navigation show Navigation (go to) preset (dining/restaurant/restaurants) destination (number) threeDisplay Commands Navigation (go to) preset Navigation show (ATM/ATMs) Display (set/select) day (mode) destination (number) four Navigation show (hotel/hotels) Display (set/select) night (mode) Navigation (go to) preset Navigation show Display (set/select) auto (mode) destination (number) five (airport/airports) Navigation show Navigation (go to) presetRadio Commands (shop/shops/shopping) destination (number) six (radio/radio band) AM Navigation hide Navigation delete (destination/ (radio/radio band) FM (gas/gas station/gas stations) route/next waypoint) (radio/radio band) XM Radio select <frequency> AM Radio select <frequency> FM Radio select <frequency> XM

Infotainment System 7-85 . Pair cell phone(s) to the vehicle. Route (used in conjunction with Phone The system may not work with another command) Next waypoint all cell phones. See “Pairing a (used in conjunction with Bluetooth Phone” in this section for more another command) For vehicles equipped with information. Add to waypoint Bluetooth capability, the system . If the cell phone has voice (used in conjunction with can interact with many cell phones, dialing capability, learn to use another command) allowing: that feature to access the Replace destination . Placement and receipt of calls in address book or contact list. (used in conjunction with a hands-free mode. See “Voice Pass-Thru” in this another command) section for more information. Yes (used in conjunction with . Sharing of the cell phone’s address book or contact list . See “Storing and Deleting Phone another command) with the vehicle. Numbers” in this section for No (used in conjunction with more information. another command) To minimize driver distraction, Destination (used for Destination VR entry, available before driving, and with the vehicle parked: { WARNING in English language only) . Become familiar with the When using a cell phone, it canVoice Tag Commands features of the cell phone. be distracting to look too long Navigation (go to) <Voice Tag> Organize the phone book and or too often at the screen ofOnStar Command contact lists clearly and delete the phone or the infotainment Hands Free duplicate or rarely used entries. (navigation) system. Taking If possible, program speed dial your eyes off the road too long or other shortcuts. or too often could cause a crash . Review the controls and resulting in injury or death. operation of the infotainment Focus your attention on driving. and navigation system.

7-86 Infotainment SystemUsing Voice Recognition 4. Start the pairing process on the Listing All Paired and Connected cell phone that you want to pair. PhonesTo use voice recognition, press the For help with this process, seeb g button on the steering wheel. your cell phone manufacturers The system can list all cell phones paired to it. If a paired cell phone isThe system responds with a tone. user guide. also connected to the vehicle, theAfter the tone say “Hands Free” to 5. Locate the device named “Your system responds with “is connected”use the Bluetooth voice recognition Vehicle” in the list on the cell after that phone name.system. The system then responds phone. Follow the instructionswith “Ready,” followed by a tone. on the cell phone to enter the 1. Press b g. Say “Hands Free”After the tone, say a command. after the tone. PIN that was provided in Step 3.For additional information say After the PIN is successfully 2. Say “Bluetooth.”“Help” while you are in a voice entered, the system prompts yourecognition menu. to provide a name for the paired 3. Say “List.” cell phone. This name will be Deleting a Paired PhonePairing a Phone used to indicate which phones If the phone name you want to1. Press b g. Say “Hands Free” are paired and connected to the delete is unknown, see “Listing All after the tone. vehicle. See “Listing All Paired and Connected Phones” later in Paired and Connected Phones.”2. Say “Bluetooth.” this section for more information. 1. Press b g. Say “Hands Free”3. Say “Pair.” The system responds 6. Repeat Steps 1 through 5 to pair after the tone. with instructions and a four‐digit additional phones. Personal Identification Number 2. Say “Bluetooth.” (PIN). The PIN is used in Step 5. 3. Say “Delete.” The system asks for which phone to delete. 4. Say the name of the phone you want to delete.

Infotainment System 7-87Connecting to a Different Phone Storing and Deleting Phone Using the “Store” CommandTo connect to a different cell phone, Numbers 1. Press b g. Say “Hands Free”the Bluetooth system looks for the The system can store up to after the tone.next available cell phone in the 30 phone numbers as name tagsorder in which all available cell 2. Say “Store.” in the Hands-Free Directory that isphones were paired. Depending shared between the Bluetooth and 3. Say the phone number or groupon which cell phone you want to OnStar systems. of numbers to store all at onceconnect to, you may have to use with no pauses, then follow thethis command several times. The following commands are used directions given by the system to to delete and store phone numbers. save a name tag for this number.1. Press b g. Say “Hands Free” Store: This command will store after the tone. a phone number, or a group of Using the “Digit Store” Command2. Say “Bluetooth.” numbers as a name tag. If an unwanted number is3. Say “Change phone.” Digit Store: This command allows recognized by the system, say a phone number to be stored as a “Clear” at any time to clear the . If another cell phone is last number. name tag by entering the digits one found, the response will at a time. To hear all of the numbers be “<Phone name> is now connected.” Delete: This command is used to recognized by the system, delete individual name tags. say “Verify” at any time. . If another cell phone is not found, the original phone Delete All Name Tags: This 1. Press b g. Say “Hands Free” remains connected. command deletes all stored after the tone. name tags in the Hands-Free 2. Say “Digit Store.” Calling Directory and the OnStar Turn-by-Turn Destinations Directory.

7-88 Infotainment System3. One at a time, say each number Using the “Delete All Name Tags” Making a Call to store. After each number is Command Calls can be made using the entered, the system repeats This command deletes all stored following commands: back the number it heard name tags in the Hands-Free followed by a tone. After the Dial or Call: The dial or Calling Directory and the OnStar last number has been entered, call command can be used Turn-by-Turn Destinations Directory. say “Store,” and then follow the interchangeably to dial a phone directions given by the system to To delete all name tags: number or a stored name tag. save a name tag for this number. 1. Press b g. Say “Hands Free” Digit Dial: This command allowsUsing the “Delete” Command after the tone. a phone number to be dialed by entering the digits one at a time.1. Press b g. Say “Hands Free” 2. Say “Delete all name tags.” Re‐dial: This command is used to after the tone. Listing Stored Numbers dial the last number used on the cell2. Say “Delete.” The list command will list all the phone.3. Say the name tag you want to stored numbers and name tags. Using the “Dial” or “Call” delete. Command Using the “List” Command 1. Press b g. Say “Hands Free” 1. Press b g. Say “Hands Free” after the tone. after the tone. 2. Say “Directory.” 2. Say “Dial” or “Call.” 3. Say “Hands-Free Calling.” 3. Say the entire number without pausing or say the name tag. 4. Say “List.” Once connected, the person called will be heard through the audio speakers.

Infotainment System 7-89Using the “Digit Dial” Command Once connected, the person called Call WaitingThe digit dial command allows a will be heard through the audio Call waiting must be supported onphone number to be dialed by speakers. the cell phone and enabled by theentering the number one at a time. Using the “Re‐dial” Command wireless service carrier.After each number is entered, thesystem repeats back the number it 1. Press b g. Say “Hands Free” . Press b g to answer anheard followed by a tone. after the tone. incoming call when another call is active. The original call isIf an unwanted number is 2. After the tone, say “Re‐dial.” placed on hold.recognized by the system, say Once connected, the person called“Clear” at any time to clear the will be heard through the audio . Press b g again to return to thelast number. speakers. original call.To hear all of the numbers . To ignore the incoming call, norecognized by the system, say Receiving a Call action is required.“Verify” at any time. When an incoming call is received, the audio system mutes and a ring . Press $ i to disconnect the1. Press b g. Say “Hands Free” tone is heard in the vehicle. current call and switch to the call after the tone. on hold.2. Say “Digit Dial.” . Press b g to answer the call.3. Say each digit, one at a time, . Press $ i to ignore a call. that you want to dial. After each digit is entered, the system repeats back the digit it heard followed by a tone. After the last digit has been entered, say “Dial.”

7-90 Infotainment SystemThree‐Way Calling Muting a Call To Transfer Audio from the Bluetooth System to a Cell PhoneThree‐way calling must be During a call, all sounds from insidesupported on the cell phone the vehicle can be muted so that the During a call with the audio in theand enabled by the wireless person on the other end of the call vehicle:service carrier. cannot hear them. 1. Press b g.1. While on a call, press b g. To mute a call, press b g, and then 2. Say “Transfer Call.”2. Say “Three‐way call.” say “Mute Call.” To Transfer Audio to the Bluetooth3. Use the dial or call command to To cancel mute, press b g, and System from a Cell Phone dial the number of the third party then say “Un‐mute Call.” During a call with the audio on the to be called. Transferring a Call cell phone, press b g. The audio4. Once the call is connected, transfers to the vehicle. If the audio Audio can be transferred between press b g to link all callers the Bluetooth system and the cell does not transfer to the vehicle, together. phone. use the audio transfer feature on the cell phone. See your cell phoneEnding a Call The cell phone must be paired manufacturers user guide for more and connected with the Bluetooth information.Press $ i to end a call. system before a call can be transferred. The connection process can take up to two minutes after the vehicle is started.

Infotainment System 7-91Voice Pass-Thru Dual Tone Multi-Frequency Clearing the SystemVoice pass‐thru allows access to (DTMF) Tones Unless information is deleted outthe voice recognition commands on The Bluetooth system can send of the in‐vehicle Bluetooth system,the cell phone. See your cell phone numbers and numbers stored as it will be retained indefinitely.manufacturers user guide to see if name tags during a call. Use this This includes all saved name tags inthe cell phone supports this feature. feature when calling a menu-driven the phone book and phone pairingTo access contacts stored in the cell phone system. Account numbers information. For information on howphone: can also be stored for use. to delete this information, see the previous sections on “Deleting a1. Press b g. Say “Hands Free” Sending a Number or Name Tag Paired Phone” and “Storing and During a Call Deleting Phone Numbers.” after the tone.2. Say “Bluetooth.” The system 1. Press b g. The system responds “Bluetooth ready,” responds “Ready,” followed followed by a tone. by a tone.3. Say “Voice.” The system 2. Say “Dial.” responds “OK, accessing 3. Say the number or name tag <phone name>.” to send. The cell phones normal prompt messages will go through their cycle according to the phones operating instructions.

7-92 Infotainment SystemPairing a Phone Using theInfotainment SystemThe pairing process can be startedby using the controls on theinfotainment system. 2. Turn the TUNE/MENU knob On the cell phone, locate the until Bluetooth displays. Press device named “Your Vehicle.” the TUNE/MENU knob or press Follow the instructions given on the Bluetooth screen button to the cell phone or follow the voice display other options. prompts, to enter the four-digit 3. Select “Add new Phone.” Personal Identification Number The pairing process will begin (PIN) that has been provided.1. Press the CONFIG button. Turn the TUNE/MENU knob searching for Bluetooth devices 4. The system voice prompt until the Phone menu displays. on the cell phone. See the cell requests a name for the phone Press the TUNE/MENU knob or phone manufacturers user guide being paired. Use a name press the Phone screen button for information on this process. that best describes the phone. to display other options. The system voice prompt then repeats the name you provided for confirmation; say “Yes.” 5. The system responds with “phone name has been successfully paired” after the pairing process is complete.

Infotainment System 7-93Listing All Paired and ConnectedPhones 2. Turn the TUNE/MENU knob 3. Turn the TUNE/MENU knob until until Bluetooth displays. Press Device List displays. Press the the TUNE/MENU knob or press TUNE/MENU knob or press the1. Press the CONFIG button. the Bluetooth screen button to Device List screen button to Turn the TUNE/MENU knob display other options. display other options. until the Phone menu displays. A list of all previously paired Press the TUNE/MENU knob or phones will be displayed. If there press the Phone screen button is a currently connected phone, to display other options. a checkmark will appear on the right side of the phone name.

7-94 Infotainment SystemDeleting a Paired Phone 2. Turn the TUNE/MENU knob 3. Turn the TUNE/MENU knob until until Bluetooth displays. Press Device List displays. Press the1. Press the CONFIG button. the TUNE/MENU knob or press TUNE/MENU knob or press the Turn the TUNE/MENU knob the Bluetooth screen button to Device List screen button to until the Phone menu displays. display other options. display other options. Press the MENU knob or press the Phone screen button to display other options.

Infotainment System 7-95 Linking to a Different Phone To link to a different phone, the new phone must be in the vehicle and available to be connected to the Bluetooth system before the process is started.4. Turn the TUNE/MENU knob, 2. Turn the TUNE/MENU knob until then press it to select the Bluetooth displays. Press the phone to be deleted. Follow TUNE/MENU knob or press the on-screen prompts to delete the Bluetooth screen button the device from the system. to display other options.5. Once a phone has been deleted, the only way to connect back to that phone is to pair the phone 1. Press the CONFIG button. again. Turn the TUNE/MENU knob until the Phone menu displays. Press the TUNE/MENU knob or press the Phone screen button to display other options.

7-96 Infotainment System3. Turn the TUNE/MENU knob until 4. Select the phone to be linked 5. The Phone menu will be Device List displays. Press the and then follow the on-screen displayed with the name TUNE/MENU knob or press the prompts. of the phone linked. Device List screen button to display other options.

Infotainment System 7-97Making a Call Phone BookPress V / 0 on the infotainmentsystem, to access the Phone Menu. 2. Enter the phone number by pressing the numbers on the keypad. The phone book can be accessed by pressing the Phone Book 3. Press the Call button on the selection on the Phone MenuEnter Number screen to make the call. screen.Use this option to enter a phone Turn the TUNE/MENU knob tonumber and make a call. select the person or place to call.1. Turn the TUNE/MENU knob, Press the TUNE/MENU knob or then press it to select Enter press the desired person or place Number selection. A dial pad to display the number. Press the displays. TUNE/MENU knob or press the number to make the call.

7-98 Infotainment System Press the TUNE/MENU knob or Call Lists press the appropriate search line to obtain the numbers of the listed persons or places that have been saved.The Phone Book feature also has asearch menu that can be accessedby pressing that option screen The Call Lists selection from thebutton. Once the Search menu Phone Menu screen can be useddisplays, turn the TUNE/MENU to show a list of incoming calls,knob to scroll through the list, then outgoing calls, and missed calls.press the TUNE/MENU button to 1. Press the CONFIG button.select the desired list item. These Turn the TUNE/MENU knoblists are saved in alphabetical order. until Phone displays. Press the MENU knob or press the Phone screen button to display other options.

Infotainment System 7-992. Turn the TUNE/MENU knob, Accepting or Declining an then press this knob or press Incoming Call either Incoming Calls, Outgoing Calls, or Missed Calls. When an incoming call is received, the audio is muted and a ring tone sounds. Accepting a Call Press the appropriate screen button for the Answer option on the screen Turn the TUNE/MENU knob, to answer the call. then press this knob or press the appropriate screen button to select someone on that list. A menu displays showing the phone numberOnce one of these options has been for that person.selected, a pop-up menu displays.A list of persons and places willdisplay for the selected option. Declining a Call Select the Decline option on the screen.

7-100 Infotainment SystemCall Waiting Conference CallingCall waiting must be supported on Conference and three-way callingthe Bluetooth phone and enabled by must be supported on the Bluetooththe wireless service carrier to work. phone and enabled by the wireless service carrier to work.Switching Calls (Only Availablewith Call Waiting) To start a conference while in a current call:This feature allows switchingbetween calls, making one call 1. Press V / 0 on the infotainmentactive, and placing the other 3. Make another call. The first system until the Phone mainon hold. call will be placed on hold while screen is shown with the current the second call is dialing and active call. connected. 4. To make a conference call, select Merge Calls and both calls merge into one conference call. 5. To add more callers to the conference call, repeat Steps 2 through 4. The number of callersSwitch Call: Turn or press the that can be added is limited byTUNE/MENU knob to Switch Call your wireless service carrier. 2. Select Enter Number on theand press Enter or press the Switch screen.Call option.

Infotainment System 7-101Ending a Call Dual Tone Multi-Frequency (DTMF) Tones The in-vehicle Bluetooth system can send numbers during a call. This is used when calling a menu-driven phone system. 1. Press V / 0.To end a call:1. Press V / 0.2. Select Hang Up.Mute or UnMute a Call1. Press V / 0. 2. Turn the TUNE/MENU knob,2. Select Mute Call. then press this knob or press the3. Select Mute Call again to Enter Number option and enter unmute the call. the number sequence. The DTMF Tones will be generated on the network as you enter each number.

7-102 Infotainment System 2 NOTES

Climate Controls 8-1Climate Controls Climate Control This provides additional heating and defrost capability obtained Systems by running the engine, even if the high voltage battery is adequatelyClimate Control Systems Automatic Climate Control Automatic Climate charged. Under these conditions, the engine will start and use fuel. System . . . . . . . . . . . . . . . . . . . . . . 8-1 Control System Make sure there is fuel in the tank.Air Vents The climate control buttons and the Do not allow the vehicle to remain Air Vents . . . . . . . . . . . . . . . . . . . . . . 8-9 touch screen are used to adjust the in extreme temperatures for long heating, cooling, and ventilation. periods without being driven or The vehicle may require the being plugged in. use of an auxiliary heat source under certain cold conditions.

8-2 Climate Controls Climate Control ButtonsA. Temperature Control E. Auto (Automatic Operation)B. Driver and Passenger Heated F. Rear Window Defogger Seats G. Manual Fan ControlC. DefrostD. Climate

Climate Controls 8-3 Climate Control Touch Screen The climate mode, fan, air delivery, recirculation, and auto heated seats are controlled by pressing the CLIMATE button on the center stack and viewing information in the center stack display. Climate Mode Operation There are three climate mode settings: Fan Only, ECO, and Comfort. These settings adjust the impact the climate control system has on the vehicles electric range or fuel economy. To select a climate mode: Climate Touch Screen Controls 1. Press CLIMATE on the center stack.A. Driver and Passenger Auto F. Climate Modes: Fan Only, ECO, 2. Press the climate mode button Heated Seats Comfort on the touch screen. The climate mode will be lit.B. Air Delivery Mode Controls G. Climate Power GaugeC. Auto Recirculation H. Manual Fan ControlD. Manual Recirculation I. Temperature Setting DisplayE. Outside Air Temperature J. Air Conditioning Indicator Display K. Heat Status Indicator

8-4 Climate ControlsFan Only Mode: The air This is normal. To prevent cold air Comfort Mode: The vehicle airconditioning and electric heat are from blowing into the interior, turn conditioning and electric heat areturned off. As long as 0 is not off the fan control and select the controlled to reach the best comfortselected, the climate control settings vent mode and manual recirculation level based on the temperaturemay not have a noticeable effect mode, and close the air vents. setting selected. In this mode,on the vehicle electric range and When in Fan Only mode, vehicle electric range or fuelfuel economy. if Auto Defog is enabled, the air economy will decrease depending conditioning and electric heat on the amount of energy requiredWhen in Fan Only mode, the to reach the best comfort levels.AUTO indicator light will be off. may turn on when high humidityWhen AUTO is selected in Fan conditions exist. See “ClimateOnly mode, the mode will change and Air Quality” under Vehicleto either ECO or Comfort. Personalization on page 5‑53 for more information on theWhen in Fan Only mode, the air Auto Defog selection. The airconditioning system may turn on conditioning may also runautomatically if the high voltage if 0 is selected. Climate Power Gaugebattery is being cooled. The climatecontrol system could blow cold air. ECO Mode: The vehicle air When the climate mode is changed, conditioning and electric heat are the Climate Power gauge displays controlled to balance comfort with the impact that user setting changes fuel economy. As long as 0 is not have on energy consumption. selected, the vehicle electric range The higher the reading, the more or fuel economy will decrease less energy is being used. than in Comfort mode, but will result in moderate comfort.

Climate Controls 8-5 The air conditioning may also run Q / R (Temperature Control): if 0 is selected, regardless of the Press to increase or decrease climate mode. the temperature. Automatic Operation Auto Defog: The system will monitor high humidity inside the The system automatically controls vehicle. When high humidity is Air Conditioning/Heat Status the fan speed, air delivery mode, detected, the climate control system Indicators and recirculation to heat or cool the may adjust to outside air supply and vehicle to the selected temperature. turn on the air conditioner or theThe air conditioning/heat statusdisplays when the air conditioning When the AUTO indicator light is heater. The fan speed may slightlyor electric heat is being used. on, the system is in full automatic increase to help prevent fogging. operation. If the air delivery mode, When high humidity is no longerThe air conditioning and electric fan speed, or recirculation setting is detected, the system will returnheat could be on at the same time adjusted, the AUTO indicator turns to its prior operation. To turn Autowhen dehumidification is required off and the selected settings display. Defog off or on, see “Climatein ECO or Comfort modes. and Air Quality” under Vehicle For automatic operation:In Fan Only mode, occasionally Personalization on page 5‑53.the air conditioning and/or heating 1. Press AUTO.status will be on if the Auto Defog 2. Set the temperature.function is enabled and high An initial setting of 23°C (74°F)humidity is detected. See “Climate is recommended. Allow theand Air Quality” under Vehicle system time to stabilize. AdjustPersonalization on page 5‑53, the temperature as needed.for details on enabling or disablingthe Auto Defog function.

8-6 Climate ControlsManual Operation Air Delivery Mode Control: - (Defog): Air is directed to theA (Fan Control): Press the Press CLIMATE to select the windshield and floor outlets. Clearsfan control buttons or the touch Climate touch screen. Press the the windows of fog or moisture.screen fan control, to increase or air delivery mode touch screen button to change the direction of 0 (Defrost): Air is directed todecrease the fan speed. The fan the windshield. The windshield isspeed setting displays. Pressing the airflow. The selected air delivery mode button is lit. Pressing any cleared of fog or frost more quickly.either button cancels automatic Selecting 0 will disable automaticfan control and the fan can be of the air delivery buttons cancels automatic air delivery control and control and the AUTO buttoncontrolled manually. Press AUTO the direction of the airflow can be indicator will not be lit.to return to automatic operation. controlled manually. Press AUTOPress the fan down button to return to automatic operation. Selecting 0 again will return to therepeatedly to turn off the fan previous climate settings.and the climate control system. To change the current mode, select one of the following: For best results, clear all snow andIf the fan is manually turned off ice from the windshield beforewhile in ECO or Comfort mode, Y (Vent): Air is directed to the defrosting.the display will automatically change instrument panel outlets.to Fan Only mode. When the fan is If 0 is selected in Fan Only orturned back on either by manually (Bi-Level): Air is divided ECO mode, air conditioning or between the instrument panelincreasing fan speed or pressing outlets and the floor outlets. electric heat may turn on and havethe AUTO button, the climate a noticeable effect on vehiclemode will revert back to ECO [ (Floor): Air is directed to the electric range and fuel economy.or Comfort mode. floor outlets.

Climate Controls 8-7AUTO h (Auto Recirculation): Pressing this button cancels Press the touch screen L AUTO orPress to allow the system to automatic recirculation. Press M AUTO button. The button colorautomatically choose the air AUTO or AUTO h to return to will change to green when thissupply mode for best performance automatic operation; recirculation feature is on. When the vehicle isin terms of comfort, efficiency, runs automatically as needed. on, this feature will automaticallyand defogging. Air is recirculated Manual recirculation mode is not activate the heated seats at theor outside air is pulled into the available when in Defrost or Defog level required by the vehiclesvehicle. The touch screen button modes. interior temperature. The activeis lit. high, medium, low, or off heatedh (Manual Recirculation): M / L (Manual Heated Seats): seat level will be indicated by the If available, the controls are on the manual heated seat button lightsPress to alternate between center stack. To operate, the vehiclerecirculating air inside the on the center stack. Use the touch must be on. screen buttons or the manualvehicle or pulling in outside air. heated seat buttons on the centerWhen selected, the touch screen Press M or L to heat the driverbutton lights up to indicate that stack to turn auto heated seats off. or passenger seat cushion and For more information, see Heatedair is being recirculated. This helps seatback. For more information,to quickly cool the air inside the Front Seats on page 3‑6. see Heated Front Seats onvehicle or prevent outside air page 3‑6.and odors from entering. M AUTO/ L AUTO (Auto Heated Seats): If available, the controls are on the touch screen on the center stack.

8-8 Climate ControlsRear Window Defogger Notice: Do not try to clear frost Compressor or other material from the inside= (Rear Window Defogger): of the front windshield and rear The vehicle has an electric poweredPress to turn the rear window air conditioning compressor. window with a razor blade ordefogger on or off. This allows for continuous air anything else that is sharp.The rear window defogger conditioning and/or high voltage This may damage the rearturns off automatically after about battery cooling operation, without window defogger grid and affectfive minutes. If turned on again, running the engine. the radios ability to pick upit runs for about five minutes stations clearly. The repairs The compressor operating speedbefore turning off. The defogger wouldnt be covered by the is not tied to the engine speed, socan also be turned off by turning vehicle warranty. some noise may be heard from thethe vehicle off. compressor, especially when air Remote Start: For vehicles withFor vehicles with heated outside conditioning use is high and the this feature, the climate controlrearview mirrors, they turn on when engine has turned off. This is system may be started by usingthe rear window defogger button normal. the Remote Keyless Entry (RKE)is on and help to clear fog or frost transmitter. The climate controlfrom the surface of the mirror. system will default to an appropriateSee Heated Mirrors on page 2‑16. heating or cooling mode. See Remote Start on page 2‑8. The rear window defogger turns on if it is cold outside.

Climate Controls 8-9Sensors Humidity Sensor Air VentsSolar Sensor The humidity sensor is near the Use the louvers on the air vents to base of the inside rearview mirror.The solar sensor is located on top change the direction of the airflow. The climate control system usesof the instrument panel, near the the sensor information to adjust the Use the thumbwheels near eachwindshield, where it monitors solar temperature and recirculation for vent to open and close off theintensity. best comfort. airflow.The climate control system Operation Tips Outside Air Temperature Sensoruses the sensor information to . Keep all outlets open wheneveradjust the temperature, fan speed, The outside air temperature sensorrecirculation, and air delivery is located behind the front grille possible for best systemmode for best comfort. of the vehicle. The vehicle uses performance. the sensor information to display . Keep the path under all seatsDo not cover the sensor; otherwise outside air temperature. The climate clear of objects to help circulatethe automatic climate control system control system uses the information the air inside the vehicle moremay not work properly. to adjust the climate system effectively. operation. . Use of non-GM approved hood deflectors can adversely affect the performance of the system.

8-10 Climate Controls 2 NOTES

Driving and Operating 9-1Driving and Shifting Into Park . . . . . . . . . . . . 9-22 Shifting out of Park . . . . . . . . . . 9-23 Ride Control Systems Traction ControlOperating Parking over Things That Burn . . . . . . . . . . . . . . . . . . 9-24 System (TCS) . . . . . . . . . . . . . . 9-37 Electronic Stability Control (ESC) . . . . . . . . . . . . . . 9-39 Electric Vehicle OperatingDriving Information Modes Cruise Control Driving for Better Energy Cruise Control . . . . . . . . . . . . . . . 9-40 System Operation . . . . . . . . . . . 9-24 Efficiency . . . . . . . . . . . . . . . . . . . . 9-2 Electric Mode . . . . . . . . . . . . . . . . 9-25 Defensive Driving . . . . . . . . . . . . . 9-4 Object Detection Systems Extended Range Mode . . . . . . 9-25 Drunk Driving . . . . . . . . . . . . . . . . . 9-4 Ultrasonic Parking Assist . . . . 9-43 Driver Selected Operating Control of a Vehicle . . . . . . . . . . . 9-5 Rear Vision Modes . . . . . . . . . . . . . . . . . . . . . . 9-26 Braking . . . . . . . . . . . . . . . . . . . . . . . 9-5 Camera (RVC) . . . . . . . . . . . . . 9-46 Out of Fuel/Engine Steering . . . . . . . . . . . . . . . . . . . . . . . 9-6 Unavailable . . . . . . . . . . . . . . . . 9-28 Charging Off-Road Recovery . . . . . . . . . . . . 9-8 Maintenance Modes . . . . . . . . . 9-28 Plug-In Charging . . . . . . . . . . . . . 9-49 Loss of Control . . . . . . . . . . . . . . . . 9-8 Driving on Wet Roads . . . . . . . . . 9-9 Engine Exhaust Delayed Charging Highway Hypnosis . . . . . . . . . . . 9-10 Engine Exhaust . . . . . . . . . . . . . . 9-30 Override . . . . . . . . . . . . . . . . . . . . 9-52 Hill and Mountain Roads . . . . . 9-10 Running the Vehicle While Charging Status Winter Driving . . . . . . . . . . . . . . . . 9-11 Parked . . . . . . . . . . . . . . . . . . . . . 9-31 Feedback . . . . . . . . . . . . . . . . . . 9-52 If the Vehicle Is Stuck . . . . . . . . 9-13 Charge Cord . . . . . . . . . . . . . . . . . 9-54 Vehicle Load Limits . . . . . . . . . . 9-14 Electric Drive Unit Electrical Requirements for Electric Drive Unit . . . . . . . . . . . 9-32 Battery Charging . . . . . . . . . . . 9-56Starting and Operating New Vehicle Break-In . . . . . . . . 9-18 Brakes Power Button . . . . . . . . . . . . . . . . 9-18 Antilock Brake Starting and Stopping the System (ABS) . . . . . . . . . . . . . . 9-33 Vehicle . . . . . . . . . . . . . . . . . . . . . 9-20 Electric Parking Brake . . . . . . . 9-35 Retained Accessory Regenerative Braking . . . . . . . . 9-37 Power (RAP) . . . . . . . . . . . . . . . 9-22

9-2 Driving and OperatingFuel Driving Information Acceleration/Braking/Coasting Fuel . . . . . . . . . . . . . . . . . . . . . . . . . 9-57 Avoid unnecessary rapid Gasoline Specifications (U.S. and Canada Only) . . . . . . . . . . 9-58 Driving for Better Energy accelerations and decelerations. California Fuel Efficiency Electric range is maximized at Requirements . . . . . . . . . . . . . . 9-58 80 km/h (50 mph) and below. Use the following tips to help Higher speeds use more energy Fuels in Foreign Countries . . . 9-58 maximize energy efficiency Fuel Additives . . . . . . . . . . . . . . . 9-59 and can significantly reduce and range. electric range. Filling the Tank . . . . . . . . . . . . . . 9-60 Filling a Portable Fuel Driving Style Use cruise control when Container . . . . . . . . . . . . . . . . . . . 9-62 appropriate. Efficiency GaugeTowing (Instrument Cluster) Plan ahead for decelerations General Towing and coast whenever possible. The ball indicator should be kept Information . . . . . . . . . . . . . . . . . 9-62 For example, do not rush to green and in the center of the gauge. traffic signals.Conversions and Add-Ons Add-On Electrical Inefficient acceleration is indicated Do not shift to N (Neutral) to coast. Equipment . . . . . . . . . . . . . . . . . 9-63 when the ball turns yellow and The vehicle recovers energy while travels above the center of the coasting and braking in D (Drive) gauge. or L (Low). Aggressive braking is indicated when the ball turns yellow and travels below the center of the gauge.

Driving and Operating 9-3Drive Mode and PRNDL Selection Climate Setting Use remote start to heat or cool theUse Normal Mode when possible. interior when the vehicle is plugged Using the heat and air conditioning in to maximize the electric range bySport Mode provides more systems decreases the energy utilizing electricity from the electricalresponsive acceleration than available for electric driving. outlet.Normal Mode but can reduce Optimal energy efficiency isefficiency. In hot weather, avoid parking in achieved with the heat, air direct sunlight or use sunshadesUse Mountain Mode prior to conditioning, and fan turned off. inside the vehicle.climbing long, steep grades in Less energy is used at low fanmountainous areas. Be sure to

Bob Hook Chevrolet 2011 Chevy Volt Owners Manual

by bobhook

Accessibility

Categories

Upload Details

Usage Rights

Statistics

Bob Hook Chevrolet 2011 Chevy Volt Owners Manual Presentation Transcript