2007 Hyundai Santa Fe GLS
2007 ELECTRICAL Fuses and Relays - Santa Fe

2007 ELECTRICAL
Fuses and Relays - Santa Fe

FUSES ...
2007 Hyundai Santa Fe GLS
2007 ELECTRICAL Fuses and Relays - Santa Fe

Fig. 2: Identifying Fuses And Relays Components Loc...
2007 Hyundai Santa Fe GLS
2007 ELECTRICAL Fuses and Relays - Santa Fe

Fig. 3: Identifying Relay Box (Engine Compartment) ...
2007 Hyundai Santa Fe GLS
2007 ELECTRICAL Fuses and Relays - Santa Fe

connected to the No.85 and No.86 terminals.
2. Ther...
2007 Hyundai Santa Fe GLS
2007 ELECTRICAL Fuses and Relays - Santa Fe

2. There should be continuity between the No.30 and...
2007 Hyundai Santa Fe GLS
2007 ELECTRICAL Fuses and Relays - Santa Fe

Fig. 8: Identifying Power Relay Connector Terminals...
2007 Hyundai Santa Fe GLS
2007 ELECTRICAL Fuses and Relays - Santa Fe

2. There should be continuity between the No.30 and...
2007 Hyundai Santa Fe GLS
2007 ELECTRICAL Fuses and Relays - Santa Fe

Courtesy of HYUNDAI MOTOR CO.
FUSE

1. Be sure ther...
2007 Hyundai Santa Fe GLS
2007 ELECTRICAL Fuses and Relays - Santa Fe

Fig. 14: Fuses And Circuits Reference Chart
Courtes...
2007 Hyundai Santa Fe GLS
2007 ELECTRICAL Fuses and Relays - Santa Fe

Fig. 15: Identifying Relay Connector Terminals
Cour...
2007 Hyundai Santa Fe GLS
2007 ELECTRICAL Fuses and Relays - Santa Fe

and ground are connected to the No.2 of I/P-C and N...
2007 Hyundai Santa Fe GLS
2007 ELECTRICAL Fuses and Relays - Santa Fe

Fig. 16: Identifying Integrated Circuit Module Rela...
Upcoming SlideShare
Loading in...5
×

Fuses

3,544

Published on

Published in: Business, Sports
0 Comments
1 Like
Statistics
Notes
  • Be the first to comment

No Downloads
Views
Total Views
3,544
On Slideshare
0
From Embeds
0
Number of Embeds
0
Actions
Shares
0
Downloads
122
Comments
0
Likes
1
Embeds 0
No embeds

No notes for slide

Fuses

  1. 1. 2007 Hyundai Santa Fe GLS 2007 ELECTRICAL Fuses and Relays - Santa Fe 2007 ELECTRICAL Fuses and Relays - Santa Fe FUSES AND RELAYS COMPONENT LOCATION Fig. 1: Identifying Fuses And Relays Components Location (Engine Room Relay Box) Courtesy of HYUNDAI MOTOR CO. Microsoft Saturday, September 26, 2009 10:02:31 AM 10:02:40 Page 1 © 2005 Mitchell Repair Information Company, LLC.
  2. 2. 2007 Hyundai Santa Fe GLS 2007 ELECTRICAL Fuses and Relays - Santa Fe Fig. 2: Identifying Fuses And Relays Components Location (Passenger Compartment Relay) Courtesy of HYUNDAI MOTOR CO. RELAY BOX (ENGINE COMPARTMENT) COMPONENT LOCATION Microsoft Saturday, September 26, 2009 10:02:31 AM Page 2 © 2005 Mitchell Repair Information Company, LLC.
  3. 3. 2007 Hyundai Santa Fe GLS 2007 ELECTRICAL Fuses and Relays - Santa Fe Fig. 3: Identifying Relay Box (Engine Compartment) Components Location Courtesy of HYUNDAI MOTOR CO. INSPECTION POWER RELAY (TYPE A) Check for continuity between the terminals. 1. There should be continuity between the No.30 and No.87 terminals when power and ground are Microsoft Saturday, September 26, 2009 10:02:31 AM Page 3 © 2005 Mitchell Repair Information Company, LLC.
  4. 4. 2007 Hyundai Santa Fe GLS 2007 ELECTRICAL Fuses and Relays - Santa Fe connected to the No.85 and No.86 terminals. 2. There should be no continuity between the No.30 and No.87 terminals when power is disconnected. Fig. 4: Identifying Power Relay Connector Terminals (Type A) Courtesy of HYUNDAI MOTOR CO. Fig. 5: Terminals Continuity Reference Chart (Type A) Courtesy of HYUNDAI MOTOR CO. POWER RELAY (TYPE B) Check for continuity between the terminals. 1. There should be continuity between the No.30 and No.87 terminals when power and ground are connected to the No.85 and No.86 terminals. Microsoft Saturday, September 26, 2009 10:02:31 AM Page 4 © 2005 Mitchell Repair Information Company, LLC.
  5. 5. 2007 Hyundai Santa Fe GLS 2007 ELECTRICAL Fuses and Relays - Santa Fe 2. There should be continuity between the No.30 and No.87 terminals when power is disconnected. Fig. 6: Identifying Power Relay Connector Terminals (Type B) Courtesy of HYUNDAI MOTOR CO. Fig. 7: Terminals Continuity Reference Chart (Type B) Courtesy of HYUNDAI MOTOR CO. POWER RELAY (TYPE C) Check for continuity between the terminals. 1. There should be continuity between the No.30 and No.87 terminals when power and ground are connected to the No.85 and No.86 terminals. 2. There should be no continuity between the No.30 and No.87 terminals when power is disconnected. Microsoft Saturday, September 26, 2009 10:02:31 AM Page 5 © 2005 Mitchell Repair Information Company, LLC.
  6. 6. 2007 Hyundai Santa Fe GLS 2007 ELECTRICAL Fuses and Relays - Santa Fe Fig. 8: Identifying Power Relay Connector Terminals (Type C) Courtesy of HYUNDAI MOTOR CO. Fig. 9: Terminals Continuity Reference Chart (Type C) Courtesy of HYUNDAI MOTOR CO. RATED LOAD CURRENT RATED LOAD CURRENT SPECIFICATION Resistive Lamp 30A 20A Inductive 20A POWER RELAY (TYPE D) Check for continuity between the terminals. 1. There should be continuity between the No.30 and No.87 terminals when power and ground are connected to the No.85 and No.86 terminals. Microsoft Saturday, September 26, 2009 10:02:31 AM Page 6 © 2005 Mitchell Repair Information Company, LLC.
  7. 7. 2007 Hyundai Santa Fe GLS 2007 ELECTRICAL Fuses and Relays - Santa Fe 2. There should be continuity between the No.30 and No.87 terminals when power is disconnected. Fig. 10: Identifying Power Relay Connector Terminals (Type D) Courtesy of HYUNDAI MOTOR CO. Fig. 11: Terminals Continuity Reference Chart (Type D) Courtesy of HYUNDAI MOTOR CO. RELATED LOAD CURRENT Fig. 12: Related Load Current Specification Chart Microsoft Saturday, September 26, 2009 10:02:31 AM Page 7 © 2005 Mitchell Repair Information Company, LLC.
  8. 8. 2007 Hyundai Santa Fe GLS 2007 ELECTRICAL Fuses and Relays - Santa Fe Courtesy of HYUNDAI MOTOR CO. FUSE 1. Be sure there is no play in the fuse holders, and that the fuses are held securely. 2. Are the fuse capacities for each circuit correct? 3. Are there any blown fuses? If a fuse is to be replaced, be sure to use a new fuse of the same capacity. Always determine why the fuse blew first and completely eliminate the problem before installing a new fuse. RELAY BOX (INSTRUMENT PANEL) COMPONENT LOCATION Fig. 13: Identifying Relay Box (Instrument Panel) Components Location Courtesy of HYUNDAI MOTOR CO. Microsoft Saturday, September 26, 2009 10:02:31 AM Page 8 © 2005 Mitchell Repair Information Company, LLC.
  9. 9. 2007 Hyundai Santa Fe GLS 2007 ELECTRICAL Fuses and Relays - Santa Fe Fig. 14: Fuses And Circuits Reference Chart Courtesy of HYUNDAI MOTOR CO. INSPECTION RELAY Microsoft Saturday, September 26, 2009 10:02:31 AM Page 9 © 2005 Mitchell Repair Information Company, LLC.
  10. 10. 2007 Hyundai Santa Fe GLS 2007 ELECTRICAL Fuses and Relays - Santa Fe Fig. 15: Identifying Relay Connector Terminals Courtesy of HYUNDAI MOTOR CO. DOOR LOCK 1. There should be continuity between the No.5 in the I/P-J and No. 18 terminals in the I/P-D when power and ground are connected to the No.2 terminal in the I/P-C and No.9 terminal in the I/P-J. 2. There should be no continuity between the No.5 terminal in the I/P-J and No. 18 terminal in the I/P-D when power is disconnected. DOOR UNLOCK 1. There should be continuity between the No.5 terminal in the I/P-J and No.7 terminal in the I/P-K when power and ground are connected to the No.2 terminal in the I/P-C and No.1 terminal in the I/P-K. 2. There should be no continuity between the No.5 terminal in the I/P-J and No.7 terminal in the I/P-D when power is disconnected. POWER WINDOW 1. There should be continuity between the No.6 in the I/P-F and No. 14 terminal in the I/P-D when power and ground are connected to the No. 10 terminal in the I/P-E and No.2 terminal in the I/P-J. 2. There should be no continuity between the No.6 terminal in the I/P-F and No. 14 terminal in the I/P-D when power is disconnected. HAZARD LAMP RELAY 1. There should be continuity between the No.2 of I/P-C and No.3 or No.4 of I/P-E terminals when power Microsoft Saturday, September 26, 2009 10:02:31 AM Page 10 © 2005 Mitchell Repair Information Company, LLC.
  11. 11. 2007 Hyundai Santa Fe GLS 2007 ELECTRICAL Fuses and Relays - Santa Fe and ground are connected to the No.2 of I/P-C and No.6 of I/P-G terminals. 2. There should be no continuity between the No.2 of I/P-C and No.3 or No.4 of I/P-E terminals when power is disconnected to the No.2 of I/P-C and No.6 of I/P-G terminals. BURGLAR ALARM HORN 1. There should be continuity between the No.1 of I/P-C and No.6 of I/P-J terminals when power and ground are connected to the No.1 of I/P-C and No.8 of I/P-J terminals. 2. There should be no continuity between the No.1 of I/P-C and No.6 of I/P-J terminals when power is disconnected to the No.1 of I/P-C and No.8 of I/P-J terminals. BURGLAR ALARM START 1. There should be continuity between the No.10 of I/P-M and No.9 of I/P-K terminals when power and ground are connected to the No.10 of I/P-M and No.3 of I/P-A terminals. 2. There should be no continuity between the No.10 of I/P-M and No.9 of I/P-K terminals when power is disconnected to the No.10 of I/P-M and No.3 of I/P-A terminals. BLOW 1. There should be continuity between the No.5 of I/P-A and No.8 of I/P-K terminals when power and ground are connected to the No.11 of I/P-A and No.8 or No.12 of I/P-M terminals. 2. There should be no continuity between the No.5 of I/P-A and No.8 of I/P-K terminals when power is disconnected to the No.11 of I/P-A and No.8 or No.12 of I/P-M terminals. FUSE 1. Be sure there is no play in the fuse holders, and that the fuses are held securely. 2. Are the fuse capacities for each circuit correct? 3. Are there any blown fuses? If a fuse is to be replaced, be sure to use a new fuse of the same capacity. Always determine why the fuse blew first and completely eliminate the problem before installing a new fuse. ICM (INTEGRATED CIRCUIT MODULE) RELAY BOX DESCRIPTION The ICM is united with many kinds of relays and installed below the body control module, relay box (Assist compartment). Microsoft Saturday, September 26, 2009 10:02:31 AM Page 11 © 2005 Mitchell Repair Information Company, LLC.
  12. 12. 2007 Hyundai Santa Fe GLS 2007 ELECTRICAL Fuses and Relays - Santa Fe Fig. 16: Identifying Integrated Circuit Module Relay Box Courtesy of HYUNDAI MOTOR CO. Fig. 17: Identifying Integrated Circuit Module Relay Box Connector Terminals Courtesy of HYUNDAI MOTOR CO. INSPECTION REAR AIR CONDITION Check for continuity between the terminals. 1. There should be continuity between the No.2 and No.3 terminals when power and ground are connected to the No.1 and No.11 in the ICM-B. 2. There should be no continuity between the No.2 and No.3 terminals when power is disconnected. DRL Check for continuity between the terminals. 1. There should be continuity between the No.8 and No.9 terminals when power and ground are connected to the No.4 and No.11 terminals in the ICM-A. 2. There should be no continuity between the No.8 and No.9 terminals when power is disconnected. Microsoft Saturday, September 26, 2009 10:02:31 AM Page 12 © 2005 Mitchell Repair Information Company, LLC.

×