PLASTIC BIRD SPIKES
Plastic Bird Spikes create and uneven landing surface
to prevent large birds such as Pigeons, Seagulls and
Crows from landing. The spikes come in 2' strips and can
easily glue or screw down to most surfaces.
HOW BIRD SPIKES WORK:
Large birds cannot land on the uneven
surface created by the spike strips and
will move on to a better spot.
BIRD SPIKES ARE
BIRD SPIKES ARE
Flat or curved
Birds the size of
pigeons or larger.
HOW ARE THEY SOLD?
Bird Spikes are sold in three different
quantities: 6 feet, 20 feet or 50 feet. You can
also choose the width and color of the plastic
bird spike. The width is chosen based on how
wide the affected area is. You don't want to
leave birds more than an inch on either side of
the spikes. If the affected area is very wide,
multiple rows may be needed.
Bird Spikes are a humane way to prevent large birds from
landing. The spikes come in 2 foot sections and are available in
3 different widths. The width of the spike should match the width
of the affected area. In other words, if you have a 5 inch wide
ledge, you will want to use the 5 inch wide spike. Our plastic bird
spikes are offered in a variety of colors including crystal clear,
brick red, light grey, brown, white, black and tan. Bird spikes are
not recommended in areas where birds are nesting.
Available in 3", 5" & 7" widths, and a
variety of colors!
Glue Trough on base of spike allows for
fast and easy application!
U.V. Protected / Sun & Weather Proof -
Not affected by extreme temperatures!
Bird Spikes have pre-drilled holes along the base and can
be glued, screwed or tied down to most surfaces. It is
important to make sure the affected area is clean and dry
before installation. Make sure there is no more than 1" left
in front or behind the spikes once installed. For the
complete installation guide, please click on the link below.
If you have any questions about installation,
or would like a professional in your area to
install the product for you, please call us at
Call 1-877-820-8205 / 949-472-4369 or