This article is about Benz trunk lid remote closing initialization by fcar heavy duty scanner.We are the Auto diagnostic scanner manufacturer.If you want to know details,please send e-mail to fcarsherry@gmail.com
Benz trunk lid remote closing initialization by fcar heavy duty scanner
1. Benz Trunk Lid Remote Closing Initialization by Fcar heavy duty scanner
1. This function applicable to Benz Trunk lid close failure;
2. Upgrade Fcar software and hardware version, select Benz, enter control unit interface
according to vehicle model, chassis and year model.The below are the image for using Fcar heavy
duty scanner.
3.Select "Body" to enter
4.Select PSE Pneumatic system equipment to enter
2. 5. If failed to enter expected interface in Step 4, pls check wire connection and try to re-enter.
Select "Activations"
6. Select the 2nd option, Remote truck lid lock initialization.
3. 7. According to tips, pls push trunk lid to maximum open position by hand before click "OK".
Then click OK
8. Click "F3" to initialize
4. 9. Initialization success
10.Press automatic control button on the back of trunk lid, and check whether initialization
success; if not, pls follow steps to operate again.
If you interest our product you,can contact us,Oue email fcarsherry@gmail.com