Which is the easy & safest way for water Disinfection Today’s Topic
There are many ways to disinfect water. It can be done by…
1 Chlorine is the most common chemical disinfectant but the question is: Is disinfection with Chlorine really safe and reliable? Chemical disinfection
1.Use of chlorine is carcinogenic in drinking water (Mutagen X)Harvard Medical/ Barcelona Study 2007. 2. Use of chlorine causes TriHaloMethanes (THM) e.g. chloroform, bromodichloromethane, bromoform bromochloromethane . 3. Use of chlorine causes haloacetic acids (HAA) mono-, di and trichloroacetic acids and mono- and bromoacetic acids. 4. Mutagen X cancer potency is 170 times greater than chloroform . MX , THM and HAA are linked to cancer, miscarriages, stillbirths and birth defects This is what you are exposed to:
1. Chlorine does not kill ALL micro-organisms in water 2. Chlorine is pH dependant 3. Chlorine is corrosive 4. Chlorine is hazardous to transport, store and use 5. Chlorine does not effectively remove the biofilm. 6. Chlorine generates by-products that are a proven and permanent risk for human health. Other limitations of chlorine
It has Chlorine in the naCompare: H 2 0 is 2 parts Hydrogen gas and 1 part Oxygen = Water and NOT Hydrogen nor Oxygen So ClO 2 is VERY different from Chlorine!! 2 Chlorine Dioxide (ClO 2 )
It is a gas that explodes when in contact with air!
Difficult and dangerous to deliver to water
When delivered to water only 60%-70% pure
The remaining 30%-40% are still dangerous and toxic residues
As such however the BEST disinfectant existing says the WHO
Improved purity and stability make it safer and more effective!
Facts about “traditional” Chlorine Dioxide:
To develop an innovative and revolutionary new concept that removes all side effects and by-products known from existing disinfectants. Thus to make a safe and clean disinfectant ! What was the challenge?
A sublime disinfection power
No more dangerous by-products
Safe to human and animals
A revolution in the world of water disinfection
If we could make a pure ClO 2 solution in water what would that mean?
After 8 years of intensive research, scientist were able to generate a pure ClO 2 dissolved in water and called it: Today we present you this revolution
1. A very powerful disinfectant
2. A cleaner of Bio-contamination
( Biofilm & Biofouling)
What is DiamondOxide
1. A 2-component liquid kit delivering:
99,99% pure 0.45% Chlorine Dioxide solution
2. A powerful oxidising agent of the FULL spectrum of micro-organisms
3. A product with the highest quality standards
4. A proven concept
5. An environmental friendly and 100% SAFE disinfectant.
6. Effective in a broad Ph range (4-10)
7. Easy to use without further big investments
What is DiamondOxide ® : The disinfectant
100% effective against all water-borne micro-organisms and spore forming bacteria (Bacteria, Viruses, Protozoa, Fungi, Mould, Parasites, larval eggs, and Sediment) etc.
1 liter disinfects up to 250,000 liters of water
Destroys algae-related taste and odour compounds (No taste, No smell)
When Diamondoxide is applied the end products are a fraction of sodium sulphate (Na 2 SO 4 ) and sodium chloride (NaCl). These substances are common in water;
What DiamondOxide ® does
Does not chlorinate organic materials; no chlorates, chlorites, chloramines. NO FREE CHLORINES!!!
Does not form THM’s, HAA’s and other organic
compounds related to carcinogens ( cancer)
No build-up of resistance in target micro-organisms
No residues formed
No corrosion; i.e. of water distribution system, pipes,
pumps, filters, domestic/commercial air conditioners,
taps, showers, industrial equipment/factories
What DiamondOxide ® does NOT
Kinetic Half Time >30 days! (in solution form when storage conditions are respected) Comparison Facts Classical Method DiamondOxide ® method Form: Cl 2 : gas NaOCl: liquid Component A: Component B: Stability of Ingredients Very limited 2 years Composition of ClO 2 solution Containing Free Chlorine Containing Chlorate Containing Chloride Containing Chlorite Explosive No Free Chlorine No Chlorate No Chloride No Chlorite Non-explosive
Kinetic Half Time >30 days!
100% Safe to Disinfection water by 100% Disinfection
Biofilm is the film of dirt, residues and micro-organisms in pipes, filters, pumps etc. . What is Biofilm / Biofouling
1. Chlorine does NOT remove both layers 2. Chlorine cannot penetrate Bio-film and kill bacteria living in and behind this Bio-film. 3. Chlorine can only corrode the top layer. 4. Chlorine dioxide and Ionization penetrate the Bio-film. 5. Only complete removal of the Bio-film guarantees 100% save water at the tap 5. Chlorine dioxide removes the Bio-film and prevents the growth by a low continuous dosing. Facts about Bio-film
Applications of DiamondOxide ®
Safe, reliable and simple water Disinfection How to use it
Component A first
Component B second
Wait for 1-5 hours (depending on temperature)
DiamondOxide ready for application
Dosage rates according to your requirement
Simple (standard) dosing equipment and a PE-HD tank;
Residual is measured by DPD Colorimetric Method (DPD 1);
Residual is measured by ORP equipment;
Residual is measured by Chlorine Dioxide Sensor
Thick PE-HD storage tank (black colored).
CLO2 in Brussels
The dosing capacity of 1 Liter DiamondOxide ® is calculated as following: DiamondOxide ® 0.45% = 4,5 gram ClO 2 per liter = 4500 ppm/mg per liter 1 liter of Diamondoxide can disinfect: at 0.02 ppm dosing= 4500 ppm/0.02 ppm = 225.000 liter of water. at 0.10 ppm dosing= 4500 ppm/0.10 ppm = 45.000 liter of water. or Volume of water to be disinfected x dosage rate 4500 ppm Yield per litter