Your SlideShare is downloading. ×
SOR DWS 2010
Upcoming SlideShare
Loading in...5
×

Thanks for flagging this SlideShare!

Oops! An error has occurred.

×
Saving this for later? Get the SlideShare app to save on your phone or tablet. Read anywhere, anytime – even offline.
Text the download link to your phone
Standard text messaging rates apply

SOR DWS 2010

231
views

Published on

Schedule Of Rates - PWD(DWS) Tripura 2010

Schedule Of Rates - PWD(DWS) Tripura 2010

Published in: Technology, Business

0 Comments
0 Likes
Statistics
Notes
  • Be the first to comment

  • Be the first to like this

No Downloads
Views
Total Views
231
On Slideshare
0
From Embeds
0
Number of Embeds
0
Actions
Shares
0
Downloads
0
Comments
0
Likes
0
Embeds 0
No embeds

Report content
Flagged as inappropriate Flag as inappropriate
Flag as inappropriate

Select your reason for flagging this presentation as inappropriate.

Cancel
No notes for slide

Transcript

  • 1. 1. The rate analysis of loading and unloading of various items include stacking. 2. 3. 4. 5. The cost for carriage will vary depending upon the riding quality in terms of surface of the road. Provision has accordingly been made considering surfaced roads ( Black Top ), unsurfaced gravel roads ( brick soled ) and katcha tracks. Analysis of carriage of materials is exclusive of the loading, unloading and stacking and this has to be added as applicable. Chapter - 1 Loading, Unloading, Carriage of Materials a. Preamble The rate analysis of loading and unloading has been given both by manual and mechanical means. Means of loading / unloading appropriate to the work and site is to adopted. The rate analysis for haulage of materials has been made in terms of tonne - kilometer(t.km) for ease of adoption depending upon the lead in km and load in tonnes. SOR for DWS works-2010.Tripura Page - 1
  • 2. Item No. unit Rate 1.1 Loading and unloading of materials by manual means. i. Cum 56.80 ii. Cum 31.30 iii. Cum 29.90 iv. Cum 25.50 v. No 0.10 vi. No 0.10 vii. t 71.90 viii. t 79.80 ix. t 91.60 x. t 99.60 xi. t 91.60 xii. t 95.60 xiii. t 113.30 xiv. t 123.50 xv. t 199.90 Unloading of SCI / CI / DI pipes , valves, specials & fittings etc. by manual means including a lead upto 50 m Loading of all kinds of PVC pipes including specials & fittings etc. by manual means including a lead upto 30 m Loading of SCI / CI / DI pipes, valves, specials & fittings etc. by manual means including a lead upto 30 m Loading of bricks by manual means including a lead upto 50 m Unloading and Stacking of Bricks by manual means including a lead upto 50 m Loading of cement, paints etc. by manual means including a lead upto 50 m Unloading of cement, paints etc. by manual means including a lead upto 50 m Loading of structural steel, steel Bars, timber etc. by manual means including a lead upto 30 m Unloading of structural steel, steel bars, timber etc. by manual means including a lead upto 50 m Loading of steel pipes like ERW / GI including specials & fittings etc. by manual means including a lead upto 30 m Loading, Unloading, Carriage of Materials Unloading of steel pipes like ERW / GI including specials & fittings etc. by manual means including a lead upto 50 m Loading of earth, sand etc. by manual means within a lead upto 50 m. Unloading of stone aggregate, brick aggregate, gravel etc. by manual means within a lead upto 50 m. Unloading of Earth, Sand by manual means including a lead upto 50 m. Brief Description of item Loading of stone aggregate, brick aggregate, gravel etc. by manual means within a lead upto 50 m. Chapter - 1 SOR for DWS works-2010.Tripura Page - 2
  • 3. Item No. unit Rate xvi. t 210.00 xvii. t 117.90 xviii. t 124.10 xix. t 82.00 xx. t 96.00 1.2 Haulage of materials by mechanical means excluding Loading & Unloading i. Surfaced Road t.km. 2.30 ii. Unsurfaced Gravel Road t.km. 2.90 iii. t.km. 4.90 Katcha Track and Track in River Bed / Nallah Bed and Choe Bed Brief Description of item Unloading of all kinds of PVC pipes including specials & fittings etc. by manual means including a lead upto 50 m Loading of all kinds of brass (including alloys) pipes, valves, specials & fittings etc. by manual means including a lead upto 30 m Unloading of all kinds of brass (including alloys) pipes, valves, specials & fittings etc. by manual means including a lead upto 50 m Loading of RCC pipes, collars, specials & fittings etc. by manual means including a lead upto 30 m Unloading of RCC pipes, collars, specials & fittings etc. by manual means including a lead upto 50 m SOR for DWS works-2010.Tripura Page - 3
  • 4. Item No. unit Rate in Rs. 2.1 A. Class - 3 ( working pressure 6.0 kg / cm2) i. 90 mm OD Metre 151.90 ii. 110 mm OD Metre 219.40 iii. 140 mm OD Metre 367.00 B. Class - 5 ( working pressure 10.0 kg / cm2) i. 160 mm OD Metre 545.10 2.2 i. 90 mm dia No. 198.50 ii. 110 mm dia No. 249.10 iii. 140 mm dia No. 329.90 iv. 160 mm dia No. 865.50 2.3 i. 90 mm dia No. 84.50 ii. 110 mm dia No. 108.90 iii. 140 mm dia No. 168.80 iv. 160 mm dia No. 286.80 Chapter - 2 Providing, fixing and laying rigid UPVC pipes conforming to IS : 4985 jointing with couplers, of same class conforming to IS : 10124 ( Pt-II ) with solvent cement conforming to IS : 14182 including testing of joints complete ( but excluding the cost of specials like bend, tees etc. which will be paid separately ) as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. Providing, fixing and laying fabricated UPVC bend of required degree conforming to IS : 10124 ( part 8 / 9 / 10 / 11 / 12 / 13 ) with solvent cement conforming to IS : 14182 including testing of joints complete as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. Providing, fixing and laying fabricated UPVC end cap conforming to IS : 10124 ( Part 4 ) with solvent cement conforming to IS : 14182 including testing of joints complete as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. Water Supply Brief Description of item SOR for DWS works-2010.Tripura Page - 4
  • 5. Item No. unit Rate in Rs. 2.4 i. 90 x 90 mm dia No. 236.90 ii. 110 x 110 mm dia No. 401.30 iii. 140 x 140 mm dia No. 581.10 iv. 160 x 160 mm dia No. 706.50 2.5 i. 110 x 90 mm dia No. 216.50 ii. 140 x 110 mm dia No. 297.00 iii. 140 x 90 mm dia No. 272.10 iv. 160 x 140 mm dia No. 489.50 2.6 i. 90 mm dia No. 261.30 ii. 110 mm dia No. 362.50 iii. 140 mm dia No. 501.50 iv. 160 mm dia No. 659.10 2.7 i. 90 mm dia No. 290.40 ii. 110 mm dia No. 391.60 Providing, fixing and laying flanged fabricated UPVC tailpiece with MS flange ( 8 mm thick ) conforming to IS : 10124 ( Part 6 ) with solvent cement conforming to IS : 14182 including testing of joints complete as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. Providing, fixing and laying flanged fabricated UPVC tailpiece conforming to IS : 10124 ( Part 6 ) with G.I. flange ( 8 mm thick ) with solvent cement conforming to IS - 14182 including testing of joints complete as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. Brief Description of item Providing, fixing and laying fabricated UPVC equal tee conforming to IS : 10124 ( Part 5 ) with solvent cement conforming to IS : 14182 including testing of joints complete as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. Providing, fixing and laying fabricated UPVC straight reducer conforming to IS : 10124 ( Part 3 ) with solvent cement conforming to IS : 14182 including testing of joints complete as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. SOR for DWS works-2010.Tripura Page - 5
  • 6. Item No. unit Rate in Rs. iii. 140 mm dia No. 530.50 iv. 160 mm dia No. 688.10 2.8 i. 16 mm OD pipe Metre 153.50 ii. 20 mm OD pipe Metre 184.60 iii. 25 mm OD pipe Metre 232.70 iv. 32 mm OD pipe Metre 309.40 v. 40 mm OD pipe Metre 406.40 vi. 50 mm OD pipe Metre 526.20 2.9 Metre 45.70 2.10 A. i. 16 mm OD pipe Metre 199.20 ii. 20 mm OD pipe Metre 234.10 Brief Description of item Providing and fixing Polyethelene-Aluminium-Polyethelene ( PE-AL- PE ) Composite Pressure Pipes conforming to IS - 15450 U.V. stabilised with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature upto 80 degree C including all special fittings of composite material ( engineering plastic blend and brass inserts wherever required ) e.g. elbows, tees, reducers, couples & connectors etc, with clamps at 1.00 metre spacing, this includes testing of joints complete as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. Internal work - Exposed on wall Concealed work including cutting chases and making good the wall etc. Making chases upto 75 x 75 mm in walls including making good and finishing with matching surface, after housing the specified pipes with necessary fittings etc. as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. Providing and fixing Polyethelene - Aluminium -Polyethelene ( PE - AL - PE ) Composite Pressure Pipes conforming to IS - 15450 U.V. stabilised with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature upto 80 degree C including all special fittings of composite material ( engineering plastic blend and brass inserts wherever required ) e.g. elbows, tees, reducers, couplers & connectors etc. with clamps at 1.00 metre spacing. This includes the costs of cutting chases and testing of joints complete as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. SOR for DWS works-2010.Tripura Page - 6
  • 7. Item No. unit Rate in Rs. iii. 25 mm OD pipe Metre 272.40 iv. 32 mm OD pipe Metre 343.80 2.11 A. External work. i. 16 mm OD pipe Metre 148.00 ii. 20 mm OD pipe Metre 176.00 iii. 25 mm OD pipe Metre 221.10 iv. 32 mm OD pipe Metre 292.60 v. 40 mm OD pipe Metre 382.70 vi. 50 mm OD pipe Metre 502.50 2.12 A. Internal work-exposed on wall i. PN-16 Pipe, 16 mm OD Metre 75.80 ii. PN-16 pipe, 20 mm OD Metre 102.00 iii. PN - 16 Pipe, 25 mm OD Metre 142.80 iv. PN-16 Pipe, 32 mm OD Metre 215.00 v. PN-16 Pipe, 40 mm OD Metre 326.60 vi. PN-16 Pipe, 50 mm OD Metre 453.50 Brief Description of item Providing and fixing Polyethelene - Aluminium -Polyethelene ( PE - AL - PE ) Composite Pressure Pipes conforming to IS - 15450 - 2004 U.V. stabilised with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature upto 80 degree C including all special fittings of composite material ( engineering plastic blend and brass inserts wherever required ) e.g. elbows, tees, reducers, couples & connectors etc, with trenching, refilling and testing of joints complete as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. Providing and fixing 3 layer PP - R ( Poly propylene Random copolymer ) pipes SDR 7.4 UV stabilised & anti-microbial fusion welded, having thermal stability for hot & cold water supply including all PP - R plain & brass threaded polypropylene random fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes testing of joints complete as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. SOR for DWS works-2010.Tripura Page - 7
  • 8. Item No. unit Rate in Rs. 2.13 A. i. PN-16 Pipe, 16 mm OD Metre 121.50 ii. PN-16 pipe, 20 mm OD Metre 144.70 iii. PN - 16 Pipe, 25 mm OD Metre 182.50 iv. PN-16 Pipe, 32 mm OD Metre 249.50 2.14 A. External Work i. PN-16 Pipe, 16 mm OD Metre 70.30 ii. PN-16 Pipe, 20 mm OD Metre 93.50 iii. PN-16 Pipe, 25 mm OD Metre 133.70 iv. PN-16 Pipe, 32 mm OD Metre 200.70 v. PN-16 Pipe, 40 mm OD Metre 303.00 vi. PN-16 Pipe, 50 mm OD Metre 429.80 vii. PN-16 Pipe, 63 mm OD Metre 659.20 viii. PN - 16 Pipe, 75 mm OD Metre 932.40 ix. PN-16 Pipe, 90 mm OD Metre 1,476.40 x. PN-10 Pipe, 110 mm OD(SDR-11) Metre 1,545.90 xi. PN-10 Pipe, 160 mm OD(SDR-11) Metre 3,231.30 Concealed work including cutting chases and making good the walls etc. Providing and fixing 3 layer PP - R ( Poly propylene Random copolymer ) pipes SDR 7.4 UV stabilised 7 & anti - microbial fusion welded , having thermal stability for hot & cold water supply including all PP - R & brass threaded polypropylene random fittings including trenching. refilling & testing of joints complete as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. Brief Description of item Providing and fixing 3 layer PP - R ( Poly propylene Random copolymer ) pipes SDR 7.4 UV stabilised & anti-microbial fusion welded, having thermal stability for hot & cold water supply including all PP - R plain & brass threaded polypropylene random fittings including fixing the pipe with clamps at 1.00 m spacing. This includes the cost of cutting chases and making good the same including testing of joints complete as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. SOR for DWS works-2010.Tripura Page - 8
  • 9. Item No. unit Rate in Rs. 2.15 A. Internal work Exposed on wall i. 15 mm nominal outer dia Pipes. Metre 103.70 ii. 20 mm nominal outer dia. Pipes. Metre 122.20 iii. 25 mm nominal outer dia. Pipes Metre 158.00 iv. 32 mm nominal outer dia. Pipes Metre 205.20 v. 40 mm nominal outer dia. Pipes Metre 286.80 vi. 50 mm nominal outer dia. Pipes Metre 434.40 2.16 A. i. 15 mm nominal outer dia Pipes. Metre 146.40 ii. 20 mm nominal outer dia. Pipes. Metre 161.90 iii. 25 mm nominal outer dia. Pipes Metre 197.70 iv. 32 mm nominal outer dia. Pipes Metre 239.70 2.17 Providing and fixing Chlorinated Polyvinyl Chloride ( CPVC ) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, this included jointing of pipes & fittings with one step CPVC solvent cement, trenching. refilling & testing of joints complete as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. Providing and fixing Chlorinated Polyvinyl Chloride ( CPVC ) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. Concealed work including cutting chases and making good the walls etc. Brief Description of item Providing and fixing Chlorinated Polyvinyl Chloride ( CPVC ) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. SOR for DWS works-2010.Tripura Page - 9
  • 10. Item No. unit Rate in Rs. A. External work i. 15 mm nominal outer dia Pipes. Metre 95.20 ii. 20 mm nominal outer dia. Pipes. Metre 110.70 iii. 25 mm nominal outer dia. Pipes. Metre 148.90 iv. 32 mm nominal outer dia. Pipes. Metre 190.90 v. 40 mm nominal outer dia. Pipes. Metre 263.10 vi. 50 mm nominal outer dia. Pipes. Metre 410.80 vii. 62.50 mm nominal inner dia. Pipes. Metre 565.90 viii. 75 mm nominal inner dia. Pipes. Metre 775.80 ix. 100 mm nominal inner dia. Pipes. Metre 1,036.80 x. 150 mm nominal inner dia. Pipes. Metre 1,359.00 2.18 A. Internal work - Exposed on wall. i. 15 mm dia. nominal bore Metre 119.90 ii. 20 mm dia. nominal bore Metre 151.90 iii. 25 mm dia. nominal bore Metre 203.10 iv. 32 mm dia. nominal bore Metre 250.00 v. 40 mm dia. nominal bore Metre 297.50 vi. 50 mm dia. nominal bore Metre 386.20 2.19 i. 15 mm dia. nominal bore Metre 2.00 ii. 20 mm dia. nominal bore Metre 2.60 iii. 25 mm dia. nominal bore Metre 3.20 Brief Description of item Providing and fixing G.I. pipes of medim class as per IS : 1239 with latest amendment complete with G.I. fittings and clamps, including cutting and making good the walls etc. complete as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. Painting G.I. Pipes and fittings with two or more coats of anti - corrosive bitumastic paint of approved quality as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. SOR for DWS works-2010.Tripura Page - 10
  • 11. Item No. unit Rate in Rs. iv. 32 mm dia. nominal bore Metre 4.00 v. 40 mm dia. nominal bore Metre 4.60 vi. 50 mm dia. nominal bore Metre 5.70 vii. 65 mm dia. nominal bore Metre 7.20 viii. 80 mm dia. nominal bore Metre 8.50 2.20 A. i. 15 mm dia. nominal bore Metre 178.30 ii. 20 mm dia. nominal bore Metre 211.10 2.21 A. External work. i. 15 mm dia. nominal bore Metre 114.60 ii. 20 mm dia. nominal bore Metre 143.30 iii. 25 mm dia. nominal bore Metre 195.00 iv. 32 mm dia. nominal bore Metre 242.00 v. 40 mm dia. nominal bore Metre 275.60 vi. 50 mm dia. nominal bore Metre 353.00 vii. 65 mm dia. nominal bore Metre 347.90 viii. 80 mm dia. nominal bore Metre 467.30 ix. 100 mm dia. nominal bore Metre 657.60 x. 125 mm dia. nominal bore Metre 836.70 xi. 150 mm dia. nominal bore Metre 986.40 Concealed pipe including painting with anti corrosive bitumastic paint, cutting chases and making good the wall. Providing and fixing G.I. pipes medim class as per IS : 1239 with latest amendment complete with G.I. fittings including trenching and refilling, cutting and making good the walls etc. complete as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. Brief Description of item Providing and fixing G.I. pipes medim class as per IS : 1239 with latest amendment complete with G.I. fittings and clamps, including cutting and making good the walls etc. complete as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. SOR for DWS works-2010.Tripura Page - 11
  • 12. Item No. unit Rate in Rs. 2.22 A. External work. i. 15 mm dia. nominal bore Metre 136.80 ii. 20 mm dia. nominal bore Metre 172.10 iii. 25 mm dia. nominal bore Metre 236.00 iv. 32 mm dia. nominal bore Metre 295.70 v. 40 mm dia. nominal bore Metre 336.30 vi. 50 mm dia. nominal bore Metre 433.50 vii. 65 mm dia. nominal bore Metre 424.80 viii. 80 mm dia. nominal bore Metre 573.50 ix. 100 mm dia. nominal bore Metre 811.40 x. 125 mm dia. nominal bore Metre 1,036.10 xi. 150 mm dia. nominal bore Metre 1,223.30 2.23 i. 25 mm to 40 mm dia. nominal bore No. 302.60 ii. 50 mm to 80 mm dia. nominal bore No. 534.00 2.24 i. 15 mm nominal bore No 186.10 ii. 20 mm nominal bore No 232.50 2.25 i. 15 mm nominal bore No 186.10 Providing and fixing brass stop cock conforming to IS : 781 as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. Brief Description of item Providing and fixing G.I. pipes of Heavy class as per IS : 1239 with latest amendment complete with G.I. fittings including trenching and refilling, cutting and making good the walls etc. complete as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting & threading the pipe etc. complete as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. Providing and fixing brass bib cock conforming to IS : 781 as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. SOR for DWS works-2010.Tripura Page - 12
  • 13. Item No. unit Rate in Rs. ii. 20 mm nominal bore No 232.50 2.26 i. 25 mm nominal bore No 702.90 ii. 32 mm nominal bore No 1,044.50 iii. 40 mm nominal bore No 1,306.20 iv. 50 mm nominal bore No 2,029.80 v. 65 mm nominal bore No 3,447.60 vi. 80 mm nominal bore No 5,059.80 2.27 A. High or low pressure with plastic floats. i. 15 mm nominal bore No 164.50 ii. 20 mm nominal bore No 211.90 iii. 25 mm nominal bore No 249.50 2.28 A. Horizontal. i. 25 mm nominal bore No 368.30 ii. 32 mm nominal bore No 467.50 iii. 40 mm nominal bore No 625.00 iv. 50 mm nominal bore No 935.00 v. 65 mm nominal bore No 1,626.60 vi. 80 mm nominal bore No 2,302.30 B. Vertical i. 25 mm nominal bore No 400.80 Brief Description of item Providing and fixing gun metal gate valve with C.I. wheel (screwed end) conforming to IS : 778 as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. Providing and fixing ball valve ( brass) of conforming to IS : 1703, 9762 as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. Providing and fixing gun metal non-return valve (screwed end) conforming to IS : 778 as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. SOR for DWS works-2010.Tripura Page - 13
  • 14. Item No. unit Rate in Rs. ii. 32 mm nominal bore No 586.00 iii. 40 mm nominal bore No 765.70 iv. 50 mm nominal bore No 1,074.20 v. 65 mm nominal bore No 1,863.50 vi. 80 mm nominal bore No 3,039.90 2.29 i. 80 mm nominal bore No 2,906.50 ii. 100 mm nominal bore No 3,881.90 iii. 125 mm nominal bore No 4,847.90 iv. 150 mm nominal bore No 5,802.30 v. 200 mm nominal bore No 10,895.60 vi. 250 mm nominal bore No 17,717.50 vii. 300 mm nominal bore No 26,212.00 viii. 350 mm nominal bore No 31,640.20 ix. 400 mm nominal bore No 37,565.80 x. 450 mm nominal bore No 42,504.20 xi. 500 mm nominal bore No 47,444.50 2.30 i. 10 mm nominal bore No 242.80 ii. 15 mm nominal bore No 246.70 iii. 20 mm nominal bore No. 248.70 iv. 25 mm nominal bore No. 250.70 2.31 Charges for fixing brass ferrule with C.I. mouth cover including boring and tapping the main, ( excluding the cost of ferrule ) complete as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. Brief Description of item Providing and fixing C.I. non-return valve of approved quality as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. Providing and fixing brass ferrule with C.I. cover conforming to IS : 2692 including boring and tapping the main as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. SOR for DWS works-2010.Tripura Page - 14
  • 15. Item No. unit Rate in Rs. i. 10 mm nominal bore No 41.50 ii. 15 mm nominal bore No. 45.50 iii. 20 mm nominal bore No. 57.70 iv. 25 mm nominal bore No. 68.70 2.32 A. 30 cm length i. 15 mm nominal bore No. 46.20 ii. 20 mm nominal bore No. 56.40 B. 45 cm length i. 15 mm nominal bore No. 56.40 ii. 20 mm nominal bore No. 71.00 2.33 i. 100 mm diameter No. 49.00 ii. 150 mm diameter No. 66.60 2.34 t 559.90 2.35 t 1,050.90 2.36 t 735.60 2.37 i. Upto 300 mm dia. t 36,592.80 Brief Description of item Charges for laying in position S & S or flanged C.I. / D.I. pipes ( excluding cost of pipe ) complete as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. Charges for laying in position S & S or flanged C.I. special such tees, bends, collars, tapers and caps etc. ( excluding cost of specials ) complete as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. Charges for laying in position S & S or flanged D.I. special such tees, bends, collars, tapers and caps etc. ( excluding cost of specials ) as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. Providing and laying S & S C.I. standard specials such as tees, bends, collars, tapers, caps etc. ( Heavy class ) as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. Providing and fixing unplasticised PVC connection pipe with brass unions as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. SOR for DWS works-2010.Tripura Page - 15
  • 16. Item No. unit Rate in Rs. ii. Over 300 mm dia. t 39,480.30 2.38 i. Upto 300 mm dia. t 65,026.30 ii. Over 300 mm dia.. t 71,720.10 2.39 i. 80 mm dia. pipe. Metre 711.60 ii. 100 mm dia. pipe. Metre 935.60 iii. 125 mm dia. pipe. Metre 1,144.60 iv. 150 mm dia. pipe. Metre 1,352.60 v. 200 mm dia. pipe. Metre 1,880.10 vi. 250 mm dia. pipe. Metre 2,671.00 vii. 300 mm dia. pipe. Metre 3,550.10 viii. 350 mm dia. pipe. Metre 4,378.50 ix. 400 mm dia. pipe. Metre 5,363.20 x. 450 mm dia. pipe. Metre 6,417.20 xi. 500 mm dia. pipe. Metre 7,816.20 xii. 600 mm dia. pipe. Metre 10,326.60 2.40 i. 80 mm dia Joints 84.50 ii. 100 mm dia Joints 93.00 iii. 125 mm dia. Joints 135.10 iv. 150 mm dia. Joints 138.80 Brief Description of item Providing and laying flanged C.I. standard specials such as tees, bends, collars, tapers, caps etc. suitable for flanged jointing as per IS : 1538 as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. Providing and laying S & S centrifugally cast ( spun ) iron pipes ( Class L A ) conforming to IS : 1536. as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. Providing lead caulked joints to spun iron or C.I. pipes and specials including testing of joints but excluding the cost of pig lead as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. SOR for DWS works-2010.Tripura Page - 16
  • 17. Item No. unit Rate in Rs. v. 200 mm dia. Joints 184.20 vi. 250 mm dia. Joints 230.00 vii. 300 mm dia. Joints 277.90 viii. 350 mm dia. Joints 288.40 ix. 400 mm dia. Joints 375.00 x. 450 mm dia. Joints 419.00 xi. 500 mm dia. Joints 443.90 xii. 600 mm dia. Joints 596.40 2.41 kg 134.70 2.42 i. 80 mm dia Joints 79.10 ii. 100 mm dia. Joints 137.40 iii. 125 mm dia. Joints 148.20 iv 150 mm dia Joints 192.00 v. 200 mm dia Joints 208.70 vi. 250 mm dia Joints 305.40 vii. 300 mm dia Joints 317.20 viii. 350 mm dia Joints 427.90 ix. 400 mm dia. Joints 719.20 x. 450 mm dia. Joints 896.60 xi. 500 mm dia. Joints 585.20 xii. 600 mm dia. Joints 1,121.40 2.43 Providing flanged joints to double flanged C.I / D.I. pipes and special including testing of joints as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. Providing and fixing C.I. sluice valves ( with cap ) complete with bolts, nuts, rubber insertions etc. ( the tail pieces if required will be paid separately ) as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. Brief Description of item Providing and Supplying of pig lead conforming to IS : 782 at site of work as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. SOR for DWS works-2010.Tripura Page - 17
  • 18. Item No. unit Rate in Rs. i. 80 mm dia. A. PN - 1.6 No. 2,351.20 B. PN - 1.0 No. 2,248.90 ii. 100 mm dia. A. PN - 1.6 No. 3,333.00 B. PN - 1.0 No. 3,140.30 iii. 125 mm dia. A. PN - 1.6 No. 4,122.10 B. PN - 1.0 No. 3,806.40 iv. 150 mm dia. A. PN - 1.6 No. 4,971.10 B. PN - 1.0 No. 4,904.10 v. 200 mm dia. A. PN - 1.6 No. 8,300.70 B. PN - 1.0 No. 7,942.70 vi. 250 mm dia. A. PN - 1.6 No. 12,779.50 B. PN - 1.0 No. 12,743.60 vii. 300 mm dia. A. PN - 1.6 No. 16,303.60 B. PN - 1.0 No. 15,046.70 viii. 350 mm dia. A. PN - 1.6 No. 23,012.70 B. PN - 1.0 No. 22,172.40 ix. 400 mm dia. A. PN - 1.6 No. 31,457.60 B. PN - 1.0 No. 31,271.30 Brief Description of item SOR for DWS works-2010.Tripura Page - 18
  • 19. Item No. unit Rate in Rs. x. 450 mm dia. A. PN - 1.6 No. 43,297.90 B. PN - 1.0 No. 39,600.00 xi. 500 mm dia. A. PN - 1.6 No. 52,859.70 B. PN - 1.0 No. 51,437.50 2.44 i. 80 mm dia. A. PN - 1.6 No. 226.00 B. PN - 1.0 No. 212.20 ii. 100 mm dia. A. PN - 1.6 No. 363.70 B. PN - 1.0 No. 349.30 iii. 125 mm dia. A. PN - 1.6 No. 405.30 B. PN - 1.0 No. 389.70 iv. 150 mm dia. A. PN - 1.6 No. 519.40 B. PN - 1.0 No. 504.20 v. 200 mm dia. A. PN - 1.6 No. 652.10 B. PN - 1.0 No. 618.30 vi. 250 mm dia. A. PN - 1.6 No. 963.20 B. PN - 1.0 No. 918.10 Brief Description of item Charges for fixing C.I. sluice valves with cap complete with bolts, nuts, rubber insertions etc. ( the tail pieces if required will be paid separately ) as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. SOR for DWS works-2010.Tripura Page - 19
  • 20. Item No. unit Rate in Rs. vii. 300 mm dia. A. PN - 1.6 No. 1,105.20 B. PN - 1.0 No. 1,029.30 viii. 350 mm dia. A. PN - 1.6 No. 1,467.40 B. PN - 1.0 No. 1,393.10 ix. 400 mm dia. A. PN - 1.6 No. 2,208.50 B. PN - 1.0 No. 2,134.90 x. 450 mm dia. A. PN - 1.6 No. 2,759.20 B. PN - 1.0 No. 2,654.00 xi. 500 mm dia. A. PN - 1.6 No. 2,329.90 B. PN - 1.0 No. 2,255.50 2.45 A. With 1st class bricks. No. 1,868.40 B. With 2nd class bricks. No. 1,783.30 Brief Description of item Constructing masonry Chamber 300 x 300 x 500 mm, inside with brick work in cement mortar 1:4 ( 1 cement: 4 fine sand ) for stop cock, with C. I. surface box 100 x 100 x 75 mm ( inside ) with hinged cover fixed in cement concrete slab 1:2:4 mix ( 1 cement: 2 fine sand : 4 graded stone aggregate 20 mm nominal size ) necessary excavation including refilling as necessary, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 ( 1 cement : 3 fine sand ) 12 mm thick finished with a floating coat of neat cement complete as per standard design , CPWD specification and direction of the Engineer-in-charge. SOR for DWS works-2010.Tripura Page - 20
  • 21. Item No. unit Rate in Rs. 2.46 A. With First class bricks. No. 5,552.20 B. With 2nd class bricks. No. 5,327.20 2.47 A. With 1st class bricks. No. 14,488.00 B. With 2nd class bricks. No. 13,884.00 2.48 A. With 1st class bricks. No. 18,873.20 B. With 2nd class bricks. No. 18,127.80 Constructing masonry Chamber 120 x 120 x 100 cm, inside with brick work in cement mortar 1 : 4 ( 1 cement : 4 fine sand ) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside ) with chained lid and RCC top slab 1 : 2 : 4 mix ( 1 cement : 2 fine sand : 4 graded stone aggregate 20 mm nominal size ) necessary excavation foundation concrete 1 : 5 : 10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1 : 3 ( 1 cement : 3 fine sand ) 12 mm thick finished with a floating coat of neat cement complete as per standard design, CPWD specification and direction of the Engineer - in - charge. Brief Description of item Constructing masonry Chamber 60 x 60 x 75 cm, inside with brick work in cement mortar 1 : 4 ( 1 cement : 4 fine sand ) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside ) with chained lid and RCC top slab 1 : 2 : 4 mix ( 1 cement : 2 fine sand : 4 graded stone aggregate 20 mm nominal size ) necessary excavation foundation concrete 1 : 5 : 10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1 : 3 ( 1 cement : 3 fine sand ) 12 mm thick finished with a floating coat of neat cement complete as per standard design, CPWD specification and direction of the Engineer - in - charge. Constructing masonry Chamber 90 x 90 x 100 cm, inside with brick work in cement mortar 1 : 4 ( 1 cement : 4 fine sand ) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside ) with chained lid and RCC top slab 1 : 2 : 4 mix ( 1 cement : 2 fine sand : 4 graded stone aggregate 20 mm nominal size ) necessary excavation foundation concrete 1 : 5 : 10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1 : 3 ( 1 cement : 3 fine sand ) 12 mm thick finished with a floating coat of neat cement complete as per standard design, CPWD specification and direction of the Engineer - in - charge. SOR for DWS works-2010.Tripura Page - 21
  • 22. Item No. unit Rate in Rs. 2.49 A. With 1st class bricks. No. 5,761.60 B. With 2nd class bricks. No. 5,564.10 2.50 A. With 1st class bricks. No. 5,702.60 B. With 2nd class bricks. No. 5,582.60 2.51 A. With 1st class bricks. No. 1,821.00 B. With 2nd class bricks. No. 1,735.90 Brief Description of item Constructing masonry Chamber 300 x 300 x 500 mm, inside with brick work in cement mortar 1:4 ( 1 cement: 4 fine sand ) for stop cock, with C. I. surface box 100 x 100 x 75 mm ( inside ) with hinged cover fixed in cement concrete slab 1:2:4 mix ( 1 cement: 2 fine sand : 4 brick aggregate 1st class 20 mm nominal size ) necessary excavation including refilling as necessary, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 brick aggregate 1st class 40 mm nominal size ) and inside plastering with cement mortar 1:3 ( 1 cement : 3 fine sand ) 12 mm thick finished with a floating coat of neat cement complete as per standard design , CPWD specification and direction of the Engineer-in-charge. Constructing masonry Chamber 60 x 60 x 75 cm, inside with brick work in cement mortar 1 : 4 ( 1 cement : 4 fine sand ) for fire hydrants, with C.I. surface box 350 x 350 mm top and 165 mm deep ( inside ) with chained lid and RCC top slab 1 : 2 : 4 mix ( 1 cement : 2 fine sand : 4 graded stone aggregate 20 mm nominal size ) necessary excavation foundation concrete 1 : 5 : 10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1 : 3 ( 1 cement : 3 fine sand ) 12 mm thick finished with a floating coat of neat cement complete as per standard design, CPWD specification and direction of the Engineer - in - charge. Constructing masonry Chamber 60 x 45 x 50 cm, inside with brick work in cement mortar 1 : 4 ( 1 cement : 4 fine sand ) for water meter complete with C.I. double flap surface box 400 x 200 x 200 mm ( inside ) with locking arrangement and RCC top slab 1 : 2 : 4 mix ( 1 cement : 2 fine sand : 4 graded stone aggregate 20 mm nominal size ) necessary excavation foundation concrete 1 : 5 : 10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1 : 3 ( 1 cement : 3 fine sand ) 12 mm thick finished with a floating coat of neat cement complete as per standard design, CPWD specification and direction of the Engineer - in - charge. SOR for DWS works-2010.Tripura Page - 22
  • 23. Item No. unit Rate in Rs. 2.52 A. With First class bricks. No. 5,395.90 B. With 2nd class bricks. No. 5,198.50 2.53 A. With 1st class bricks. No. 14,128.50 B. With 2nd class bricks. No. 13,524.50 2.54 A. With 1st class bricks. No. 18,371.20 B. With 2nd class bricks. No. 17,625.80 Brief Description of item Constructing masonry Chamber 60 x 60 x 75 cm, inside with brick work in cement mortar 1 : 4 ( 1 cement : 4 fine sand ) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside ) with chained lid and RCC top slab 1 : 2 : 4 mix ( 1 cement : 2 fine sand : 4 brick aggregate 1st class 20 mm nominal size ) necessary excavation foundation concrete 1 : 5 : 10 ( 1 cement : 5 fine sand : 10 brick aggregate 1st class 40 mm nominal size ) and inside plastering with cement mortar 1 : 3 ( 1 cement : 3 fine sand ) 12 mm thick finished with a floating coat of neat cement complete as per standard design, CPWD specification and direction of the Engineer - in - charge. Constructing masonry Chamber 90 x 90 x 100 cm, inside with brick work in cement mortar 1 : 4 ( 1 cement : 4 fine sand ) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside ) with chained lid and RCC top slab 1 : 2 : 4 mix ( 1 cement : 2 fine sand : 4 brick aggregate 1st class 20 mm nominal size ) necessary excavation foundation concrete 1 : 5 : 10 ( 1 cement : 5 fine sand : 10 brick aggregate 1st class 40 mm nominal size ) and inside plastering with cement mortar 1 : 3 ( 1 cement : 3 fine sand ) 12 mm thick finished with a floating coat of neat cement complete as per standard design, CPWD specification and direction of the Engineer - in - charge. Constructing masonry Chamber 120 x 120 x 100 cm, inside with brick work in cement mortar 1 : 4 ( 1 cement : 4 fine sand ) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside ) with chained lid and RCC top slab 1 : 2 : 4 mix ( 1 cement : 2 fine sand : 4 brick aggregate 1st class 20 mm nominal size ) necessary excavation foundation concrete 1 : 5 : 10 ( 1 cement : 5 fine sand : 10 brick aggregate 1st class 40 mm nominal size ) and inside plastering with cement mortar 1 : 3 ( 1 cement : 3 fine sand ) 12 mm thick finished with a floating coat of neat cement complete as per standard design, CPWD specification and direction of the Engineer - in - charge. SOR for DWS works-2010.Tripura Page - 23
  • 24. Item No. unit Rate in Rs. 2.55 A. With 1st class bricks. No. 5,632.80 B. With 2nd class bricks. No. 5,435.40 2.56 A. With 1st class bricks. No. 5,489.60 B. With 2nd class bricks. No. 5,369.60 2.57 i. 15 mm dia. nominal bore Metre 4.30 ii. 20 mm dia. nominal bore Metre 5.40 iii. 25 mm dia. nominal bore Metre 6.80 iv. 32 mm dia. nominal bore Metre 8.50 v. 40 mm dia. nominal bore Metre 9.60 vi. 50 mm dia. nominal bore Metre 12.10 vii. 65 mm dia. nominal bore Metre 15.20 Constructing masonry Chamber 60 x 60 x 75 cm, inside with brick work in cement mortar 1 : 4 ( 1 cement : 4 fine sand ) for fire hydrants, with C.I. surface box 350 x 350 mm top and 165 mm deep ( inside ) with chained lid and RCC top slab 1 : 2 : 4 mix ( 1 cement : 2 fine sand : 4 brick aggregate 1st class 20 mm nominal size ) necessary excavation foundation concrete 1 : 5 : 10 ( 1 cement : 5 fine sand : 10 brick aggregate 1st class 40 mm nominal size ) and inside plastering with cement mortar 1 : 3 ( 1 cement : 3 fine sand ) 12 mm thick finished with a floating coat of neat cement complete as per standard design, CPWD specification and direction of the Engineer - in - charge. Constructing masonry Chamber 60 x 45 x 50 cm, inside with brick work in cement mortar 1 : 4 ( 1 cement : 4 fine sand ) for water meter complete with C.I. double flap surface box 400 x 200 x 200 mm ( inside ) with locking arrangement and RCC top slab 1 : 2 : 4 mix ( 1 cement : 2 fine sand : 4 brick aggregate 1st class 20 mm nominal size ) necessary excavation foundation concrete 1 : 5 : 10 ( 1 cement : 5 fine sand : 10 brick aggregate 1st class 40 mm nominal size ) and inside plastering with cement mortar 1 : 3 ( 1 cement : 3 fine sand ) 12 mm thick finished with a floating coat of neat cement complete as per standard design, CPWD specification and direction of the Engineer - in - charge. Painting G.I. Pipes and fittings with synthetic enamel paint over a ready mixed priming coat, both of approved quality for new work as per CPWD specification and direction of the Enginner - in - charge. Brief Description of item SOR for DWS works-2010.Tripura Page - 24
  • 25. Item No. unit Rate in Rs. viii. 80 mm dia. nominal bore Metre 17.80 2.58 i. 15 mm dia. nominal bore Metre 2.00 ii. 20 mm dia. nominal bore Metre 2.50 iii. 25 mm dia. nominal bore Metre 3.10 iv. 32 mm dia. nominal bore Metre 3.90 v. 40 mm dia. nominal bore Metre 4.50 vi. 50 mm dia. nominal bore Metre 5.60 vii. 65 mm dia. nominal bore Metre 7.10 viii. 80 mm dia. nominal bore Metre 8.30 2.59 i. 15 mm dia. nominal bore Metre 30.30 ii. 20 mm dia. nominal bore Metre 30.80 iii. 25 mm dia. nominal bore Metre 31.50 iv. 32 mm dia. nominal bore Metre 32.30 v. 40 mm diameter pipe Metre 32.80 vi. 50 mm diameter pipe Metre 33.70 vii. 65 mm diameter pipe Metre 34.90 viii. 80 mm diameter pipe Metre 35.60 ix. 100 mm diameter pipe Metre 36.90 x. 150 mm diameter pipe Metre 38.50 2.60 Brief Description of item Boring with 100 mm diameter casing pipe for hand pump / tube well in all soils except ordinary hard rocks requiring blasting including removing the casing pipe after the hand pipe / tube well is lowered and tested as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. Repainting G.I. Pipes and fittings with synthetic enamel paint of approved quality as per CPWD specification and direction of the Enginner - in - charge. Providing and filling local sand alround the G.I. pipes in external works as per CPWD specification and direction of the Enginner - in - charge. SOR for DWS works-2010.Tripura Page - 25
  • 26. Item No. unit Rate in Rs. i. Upto 6 metres depth Metre 161.40 ii. Beyond 6m and upto 12 m depth Metre 191.50 iii. Beyond 12m and upto 18 m depth Metre 223.00 2.61 Metre 1,579.60 2.62 Metre 263.60 2.63 i. 15 mm nominal bore. No. 346.10 2.64 i. 15 mm nominal bore. No. 401.90 2.65 i. 15 mm nominal bore. No. 401.90 2.66 i. 15 mm nominal bore. No. 446.00 2.67 i. 15 mm nominal bore. 86 mm long,weighing not less than 88 gms. No. 154.00 ii. 15 mm nominal bore. Providing and fixing C.P. brass stop cock ( concealed ) of standard design and of approved make conforming to IS : 8931 as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS : 8931 as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. Brief Description of item Providing and placing the position 40 mm diameter brass strainer of approved quality as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. Providing and fixing to filter and lowering to proper levels 40 mm G.I. pipe for tube well including cleaning and priming the tube well as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. Providing and fixing PTMT bib cock of approved quality and colour as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standard and weighing not less than 810 gms as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gmsas per chapter 20 of CPWD specification and direction of the Engineer - in - charge. SOR for DWS works-2010.Tripura Page - 26
  • 27. Item No. unit Rate in Rs. 122 mm long,weighing not less than 99 gms. No. 337.70 iii. 15 mm nominal bore. 165 mm long,weighing not less than 110 gms. No. 241.40 iv. 15 mm nominal bore, 90 mm long, weighing not less than 93 grams No. 174.80 2.68 i. 15 mm nominal bore. 86 mm long, weighing not less than 88 gms. No. 154.00 ii. 20 mm nominal bore. 89 mm long, weighing not less than 98 gms. No. 189.60 iii. 15 mm nominal bore. Concealed 108 mm long, weighing not less than 108 gms. No. 248.80 2.69 i. 15 mm nominal bore. 107 mm long, weighing not less than 110 gms. No. 234.10 ii. 15 mm nominal bore. 125 mm long foam flow, weighing not less than 120 gms. No. 337.70 2.70 i. 15 mm nominal bore, 98 mm long , weighing not less than 75 grams. No. 145.20 ii. 15 mm nominal bore, 80 mm long , weighing not less than 46 grams. No. 122.90 2.71 Providing and fixing PTMT push cock of approved quality and colour as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. Providing and fixing PTMT grating of approved quality and colour as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. Providing and fixing PTMT stop cock of approved quality and colour as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. Providing and fixing PTMT pillar cock of approved quality and colour as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. Brief Description of item SOR for DWS works-2010.Tripura Page - 27
  • 28. Item No. unit Rate in Rs. A. Circular type. i. 100 mm nominal dia No. 48.40 ii. 125 mm nominal dia with 25 mm waste hole No. 57.30 B. Rectangular type with openable circle lid. i. No. 137.30 2.72 i. 50 mm dia No. 3,092.90 ii. 80 mm dia No. 4,509.90 iii. 100 mm dia No. 5,870.70 iv. 125 mm dia No. 6,822.30 v. 150 mm dia No. 7,806.90 vi. 200 mm dia No. 8,659.90 vii. 250 mm dia No. 9,825.20 viii. 300 mm dia No. 10,394.50 ix. 350 mm dia No. 11,202.10 x. 400 mm dia No. 12,085.80 xi. 450 mm dia No. 12,948.50 xii. 500 mm dia No. 13,426.90 2.73 i. 80 mm dia Nominal bore No. 3,145.70 ii. 100 mm dia. Nominal bore. No. 4,911.10 Brief Description of item 150 mm nominal size square 100mm dia of the inner hinged round grating. Providing and fixing C.I. double action air valve of approved quality with bolts, nuts, rubber insertions etc. complete as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. ( The tail pieces, tapers etc if required will be paid separately ). Providing and fixing enclosed type water meter ( bulk type ) conforming to IS : 2373 and tested by DWS wing of PWD complete with bolts, nuts, rubber insertions etc. as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. ( The tail pieces, tapers etc if required will be paid separately ). SOR for DWS works-2010.Tripura Page - 28
  • 29. Item No. unit Rate in Rs. iii. 150 mm dia. Nominal bore. No. 6,990.80 iv. 200 mm dia. Nominal bore. No. 7,894.00 2.74 i. 80 mm dia. Nominal bore. No. 3,915.80 ii. 100 mm dia. Nominal bore. No. 5,903.30 iii. 150 mm dia. Nominal bore. No. 7,657.30 iv. 200 mm dia. Nominal bore. No. 10,633.70 2.75 i. No. 206.90 ii. No. 294.70 iii. No. 629.90 iv. No. 1,146.80 v. No. 1,702.10 2.76 No. 189.60 2.77 No. 129.90 2.78 No. 169.80 40 mm dia. Nominal bore.206 mm long, weighing not less than 690 gms. 50 mm dia. Nominal bore.242 mm long, weighing not less than 1240 gms. Providing and fixing PTMT angle stop cock 15 mm nominal bore, weighing not less than 85 gms as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. Providing and fixing PTMT swivelling shower, 15 mm nominal bore, weighing not less than 40 gms as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. Providing and fixing PTMT soap Dish Holder having length of 138 mm, breadth 102 mm, height of 75 mm with concealed fitting arrangements weighing not less than 106 gms as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. Brief Description of item Providing and fixing C.I. dirt box strainer for bulk type water meter with nuts, bolts, rubber insertions etc. complete conforming to IS : 2373 as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. Providing and fixing PTMT Ball cock of approved quality, colour and make complete with aluminium rod with L.P. / H.P.H.D. plastic ball as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. 15 mm dia Nominal bore. 105 mm long,weighing not less than 138 gms. 20 mm dia Nominal bore. 120 mm long,weighing not less than 198 gms. 25 mm dia Nominal bore. 152 mm long,weighing not less than 440 gms. SOR for DWS works-2010.Tripura Page - 29
  • 30. Item No. unit Rate in Rs. 2.79 i Upto 300 mm dia. t 80,000.50 ii. Above 300 mm dia. t 83,697.40 2.80 i Upto 300 mm dia. t 133,243.90 ii. Above 300 mm dia. t 199,429.20 2.81 i. Upto 300 mm dia. t 140,076.90 ii. Above 300 mm dia. t 211,645.77 2.82 i. 80 mm dia Joints 38.30 ii. 100 mm dia Joints 42.30 iii. 125 mm dia Joints 49.10 iv. 150 mm dia Joints 67.70 v. 200 mm dia Joints 99.90 vi. 250 mm dia Joints 135.00 vii. 300 mm dia Joints 187.80 viii. 350 mm dia Joints 226.70 ix. 400 mm dia Joints 426.70 x. 450 mm dia Joints 474.10 Providing and laying D.I. specials of class K - 12 suitable for mechanical jointing as per IS : 9523 as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. Charges for push-on ( Tyton ) joints to centrifugually ( Spun ) cast iron pipes or ductile iron pipes including testing of joints and including the cost of rubber gasket as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. Brief Description of item Providing and laying S & S. C.I. Standard specials suitable for mechanical jointing as per IS: 13382 as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. Providing and laying D.I. specials of class K - 12 suitable for push - on jointing as per IS : 9523 as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. SOR for DWS works-2010.Tripura Page - 30
  • 31. Item No. unit Rate in Rs. xi. 500 mm dia Joints 489.00 xii. 600 mm dia Joints 582.30 xiii. 650 mm dia Joints 881.50 xiv. 700 mm dia Joints 1,026.50 xv. 800 mm dia Joints 1,140.60 xvi. 900 mm dia Joints 1,500.40 xvii. 1000 mm dia Joints 1,826.20 2.83 i. 80 mm dia C.I. Double Flanged Pipe. Metre 1,057.20 ii. 100 mm dia C.I. Double Flanged Pipe. Metre 1,462.30 iii. 125 mm dia C.I. Double Flanged Pipe. Metre 1,863.20 iv. 150 mm dia C.I. Double Flanged Pipe. Metre 2,262.90 v. 200 mm dia C.I. Double Flanged Pipe. Metre 3,133.30 vi. 250 mm dia C.I. Double Flanged Pipe. Metre 4,194.30 vii. 300 mm dia C.I. Double Flanged Pipe. Metre 5,332.50 viii. 350 mm dia C.I. Double Flanged Pipe. Metre 6,819.60 ix. 400 mm dia C.I. Double Flanged Pipe. Metre 8,809.30 x. 450 mm dia C.I. Double Flanged Pipe. Metre 11,408.50 xi. 500 mm dia C.I. Double Flanged Pipe. Metre 14,884.80 xii. 600 mm dia C.I. Double Flanged Pipe. Metre 19,416.70 2.84 i 80 mm dia Ductile Iron Class K-7 pipes. Metre 863.00 ii. 100 mm dia Ductile Iron Class K-7 pipes. Metre 969.20 iii. 125 mm dia Ductile Iron Class K-7 pipes. Metre 1,194.70 Providing and laying S & S Centrifugally Cast ( Spun ) Ductile Iron Class K-7 Pipes conforming to IS : 8329 as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. Brief Description of item Providing and laying Double Flanged ( screwed / welded ) centrifugually ( Spun ) cast iron, class B ( IS : 1536 ) as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. SOR for DWS works-2010.Tripura Page - 31
  • 32. Item No. unit Rate in Rs. iv. 150 mm dia Ductile Iron Class K-7 pipes. Metre 1,392.60 v. 200 mm dia Ductile Iron Class K-7 pipes. Metre 1,811.40 vi. 250 mm dia Ductile Iron Class K-7 pipes. Metre 2,385.70 vii. 300 mm dia Ductile Iron Class K-7 pipes. Metre 2,963.50 viii. 350 mm dia Ductile Iron Class K-7 pipes. Metre 3,718.10 ix. 400 mm dia Ductile Iron Class K-7 pipes. Metre 4,499.10 x. 450 mm dia Ductile Iron Class K-7 pipes. Metre 5,300.80 xi. 500 mm dia Ductile Iron Class K-7 pipes. Metre 7,168.10 xii. 600 mm dia Ductile Iron Class K-7 pipes. Metre 8,370.70 xiii. 700 mm dia Ductile Iron Class K-7 pipes. Metre 9,781.10 xiv. 800 mm dia Ductile Iron Class K-7 pipes. Metre 12,477.30 xv. 900 mm dia Ductile Iron Class K-7 pipes. Metre 14,868.70 xvi. 1000 mm dia Ductile Iron Class K-7 pipes. Metre 17,768.50 2.85 i. 80 mm dia Ductile Iron Class K-9 pipes. Metre 977.00 ii. 100 mm dia Ductile Iron Class K-9 pipes. Metre 1,107.60 iii. 150 mm dia Ductile Iron Class K-9 pipes. Metre 1,617.60 iv. 200 mm dia Ductile Iron Class K-9 pipes. Metre 2,058.70 v. 250 mm dia Ductile Iron Class K-9 pipes. Metre 3,062.80 vi. 300 mm dia Ductile Iron Class K-9 pipes. Metre 3,866.50 vii. 350 mm dia Ductile Iron Class K-9 pipes. Metre 4,813.20 viii. 400 mm dia Ductile Iron Class K-9 pipes. Metre 5,625.70 ix. 450 mm dia Ductile Iron Class K-9 pipes. Metre 6,881.30 x. 500 mm dia Ductile Iron Class K-9 pipes. Metre 8,187.00 xi. 600 mm dia Ductile Iron Class K-9 pipes. Metre 9,387.10 Brief Description of item Providing and laying S & S Centrifugally Cast ( Spun ) Ductile Iron Class K-9 Pipes conforming to IS : 8329 as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. SOR for DWS works-2010.Tripura Page - 32
  • 33. Item No. unit Rate in Rs. xii. 700 mm dia Ductile Iron Class K-9 pipes. Metre 12,765.90 xiii. 750 mm dia Ductile Iron Class K-9 pipes. Metre 14,537.70 xiv. 800 mm dia Ductile Iron Class K-9 pipes. Metre 14,958.70 xv. 900 mm dia Ductile Iron Class K-9 pipes. Metre 17,451.70 xvi. 1000 mm dia Ductile Iron Class K-9 pipes. Metre 19,649.90 2.86 i. 80 mm dia Ductile Iron Doubled flanged Metre 1,781.50 ii. 100 mm dia Ductile Iron Doubled flanged Metre 2,804.80 iii. 125 mm dia Ductile Iron Doubled flanged Metre 3,270.20 iv. 150 mm dia Ductile Iron Doubled flanged Metre 3,887.90 v. 200 mm dia Ductile Iron Doubled flanged Metre 5,042.10 vi. 250 mm dia Ductile Iron Doubled flanged Metre 6,694.50 vii. 300 mm dia Ductile Iron Doubled flanged Metre 8,614.30 viii. 350 mm dia Ductile Iron Doubled flanged Metre 10,728.60 ix. 400 mm dia Ductile Iron Doubled flanged Metre 12,815.60 x. 450 mm dia Ductile Iron Doubled flanged Metre 15,492.30 xi. 500 mm dia Ductile Iron Doubled flanged Metre 18,779.30 xii. 600 mm dia Ductile Iron Doubled flanged Metre 25,472.00 xiii. 700 mm dia Ductile Iron Doubled flanged Metre 31,427.00 2.87 i. 15 mm nominal bore with 30 cm length No. 55.80 ii. 15 mm nominal bore with 45 cm length No. 67.10 Providing and laying Doubled flanged ( Screwed / Welded ) Centrifugally cast ( Spun ) Ductile Iron Pipes of Class K 9 conforming to IS : 8329 as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. Providing and fixing unplastisised P.V.C. connection pipe with PTMT nuts of approved quality and colour as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. Brief Description of item SOR for DWS works-2010.Tripura Page - 33
  • 34. Item No. unit Rate in Rs. 2.88 i. 15 mm nominal bore, weighing not less than 32 gms. No. 53.30 ii. 20 mm nominal bore, weighing not less than 40 gms. No. 59.20 iii. 25 mm nominal bore, weighing not less than 62 gms. No. 86.00 2.89 No. 103.90 2.90 No. 51.80 2.91 No. 46.80 2.92 i. 80 mm dia Metre 3.40 ii. 100 mm dia Metre 4.50 iii. 125 mm dia Metre 5.80 iv. 150 mm dia Metre 7.20 v. 200 mm dia Metre 10.10 Making hole upto 20 x 20 cm and embedding pipes upto 150 mm diameter in masonry and filling with cement concrete 1 : 2 : 4 ( 1 cement : 2 fine sand : 4 stone aggregate 20 mm nominal size ) including finishing with cement plaster 1:3 (1 cement : 3 river sand) complete including disposal of rubbish as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. Disinfecting C.I. / D.I. water mains by flushing with water containing bleaching powder at 0.5 gms per litre of water and cleaning the same with fresh water, operation to be repeated three times including getting the sample of water from the disinfected main tested in the DWS laboratory as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. Cutting holes upto 30 x 30 cm in walls including making good the same with cement concrete 1 : 2 : 4 ( 1 cement : 2 fine sand : 4 stone aggregate 20 mm nominal size ) including finishing with cement plaster 1:3 (1 cement : 3 river sand) complete including disposal of rubbish as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. Cutting holes upto 15 x 15 cm in RCC floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1 : 2 : 4 ( 1 cement : 2 fine sand : 4 stone aggregate 20 mm nominal size ) including finishing with cement plaster 1:3 (1 cement : 3 river sand) complete including disposal of rubbish as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. Brief Description of item Providing and fixing PTMT Extension nipple for water tank pipe, fittings of approved quality and colour as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. SOR for DWS works-2010.Tripura Page - 34
  • 35. Item No. unit Rate in Rs. vi. 250 mm dia Metre 13.30 vii. 300 mm dia Metre 15.80 viii. 350 mm dia Metre 18.50 ix. 400 mm dia Metre 21.60 x. 450 mm dia Metre 24.90 xi. 500 mm dia Metre 28.60 xii. 600 mm dia Metre 36.60 2.93 i. 80 mm dia Metre 2.50 ii. 100 mm dia Metre 3.20 iii. 125 mm dia Metre 4.50 iv. 150 mm dia Metre 6.20 v. 200 mm dia Metre 10.50 vi. 250 mm dia Metre 15.10 vii. 300 mm dia Metre 20.10 viii. 350 mm dia Metre 26.90 ix. 400 mm dia Metre 34.50 x. 450 mm dia Metre 43.10 xi. 500 mm dia Metre 52.20 xii. 600 mm dia Metre 73.50 2.94 i. 80 mm dia Metre 114.80 Brief Description of item Extra for every operation of disinfecting the C.I. / D.I. main by flushing with water containing bleaching powder at 0.5 gms per litre of water and cleaning the same with fresh water, including getting the samples of water tested in the DWS laboratory as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. Dismantling old C.I. / D.I. pipes including excavation and refilling trenches after taking out the pipes, breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes at site lead upto 50 metre as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. SOR for DWS works-2010.Tripura Page - 35
  • 36. Item No. unit Rate in Rs. ii. 100 mm dia Metre 117.80 iii. 125 mm dia Metre 120.50 iv. 150 mm dia Metre 122.80 v. 200 mm dia Metre 135.00 vi. 250 mm dia Metre 146.40 vii. 300 mm dia Metre 156.00 viii. 350 mm dia Metre 164.60 ix. 400 mm dia Metre 171.90 x. 450 mm dia Metre 179.70 xi. 500 mm dia Metre 185.80 xii. 600 mm dia Metre 195.20 2.95 i. 80 mm dia No. 22.00 ii. 100 mm dia No. 29.30 iii. 125 mm dia No. 40.30 iv. 150 mm dia No. 55.00 v. 200 mm dia No. 73.30 vi. 250 mm dia No. 91.60 vii. 300 mm dia No. 109.90 viii. 350 mm dia No. 128.30 ix. 400 mm dia No. 146.60 x. 450 mm dia No. 164.90 xi. 500 mm dia No. 183.20 xii. 600 mm dia No. 219.90 2.96 Brief Description of item Charges for cutting C.I. pipe with steel saw by manual means as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. Charges for cutting D.I. pipe with steel saw by manual means as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. SOR for DWS works-2010.Tripura Page - 36
  • 37. Item No. unit Rate in Rs. i. 80 mm dia No. 22.00 ii. 100 mm dia No. 29.30 iii. 125 mm dia No. 40.30 iv. 150 mm dia No. 55.00 v. 200 mm dia No. 73.30 vi. 250 mm dia No. 91.60 vii. 300 mm dia No. 109.90 viii. 350 mm dia No. 128.30 ix. 400 mm dia No. 146.60 x. 450 mm dia No. 164.90 xi. 500 mm dia No. 183.20 xii. 600 mm dia No. 219.90 2.97 i. 80 mm dia No. 110.90 ii. 100 mm dia No. 147.80 iii. 125 mm dia No. 203.20 iv. 150 mm dia No. 277.10 v. 200 mm dia No. 369.50 vi. 250 mm dia No. 461.90 vii. 300 mm dia No. 554.20 viii. 350 mm dia No. 646.60 ix. 400 mm dia No. 739.00 x. 450 mm dia No. 831.40 xi. 500 mm dia No. 923.70 xii. 600 mm dia No. 1,108.50 Brief Description of item Charges for cutting C.I. pipe with Mechanical cutter as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. SOR for DWS works-2010.Tripura Page - 37
  • 38. Item No. unit Rate in Rs. 2.98 i. 80 mm dia No. 66.50 ii. 100 mm dia No. 88.70 iii. 125 mm dia No. 121.90 iv. 150 mm dia No. 166.30 v. 200 mm dia No. 221.70 vi. 250 mm dia No. 277.10 vii. 300 mm dia No. 332.60 viii. 350 mm dia No. 388.00 ix. 400 mm dia No. 443.40 x. 450 mm dia No. 498.80 xi. 500 mm dia No. 554.20 xii. 600 mm dia No. 665.10 2.99 i. 15 mm dia 75 mm long No. 43.00 ii. 15 mm dia 150 mm long No. 44.50 iii. 15 mm dia 225 mm long No. 45.90 iv. 20 mm dia 75 mm long No. 50.40 v. 20 mm dia 150 mm long No. 51.80 vi. 20 mm dia 225 mm long No. 53.30 vii. 25 mm dia 75 mm long No. 57.70 viii. 25 mm dia 150 mm long No. 59.20 ix. 25 mm dia 225 mm long No. 60.70 2.100 Brief Description of item Charges for cutting D.I. pipe with Mechanical cutter as per chapter 20 of CPWD specification and direction of the Engineer - in - Providing and fixing G.I. Nipple of medium class as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. Providing and fixing stainless steel bib cock ( self closing type ) as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. SOR for DWS works-2010.Tripura Page - 38
  • 39. Item No. unit Rate in Rs. i. 15 mm dia No. 129.40 2.101 i. 15 mm dia No. 73.30 2.102 i. 15 mm dia No. 139.30 ii. 20 mm dia No. 183.60 iii. 25 mm dia No. 228.10 iv. 32 mm dia No. 279.90 v. 40 mm dia No. 317.00 vi. 50 mm dia No. 353.90 vii. 63 mm dia No. 413.20 viii. 80 mm dia No. 457.60 ix. 100 mm dia No. 509.40 2.103 i. 90 mm dia with 15 mm dia opening No. 250.90 ii. 90 mm dia with 20 mm dia opening No. 262.50 iii. 90 mm dia with 25 mm dia opening No. 274.10 iv. 110 mm dia with 15 mm dia opening No. 295.60 v. 110 mm dia with 20 mm dia opening No. 301.40 vi. 110 mm dia with 25 mm dia opening No. 313.00 vii. 140 mm dia with 15 mm dia opening No. 342.10 viii. 140 mm dia with 20 mm dia opening No. 363.60 ix. 140 mm dia with 25 mm dia opening No. 375.20 Brief Description of item Providing and fixing C. I. Bib cock ( long handle ) as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. Providing and fixing G.I. Full way valve as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. Providing and fixing U.P.V.C. service saddle as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. SOR for DWS works-2010.Tripura Page - 39
  • 40. Item No. unit Rate in Rs. 2.104 i. 50 mm dia No. 3,557.50 ii. 80 mm dia No. 4,695.80 iii. 100 mm dia No. 5,638.40 iv. 125 mm dia No. 7,310.10 v. 150 mm dia No. 11,384.40 vi. 200 mm dia No. 20,309.80 vii. 250 mm dia No. 27,480.00 viii. 300 mm dia No. 30,744.00 ix. 350 mm dia No. 52,098.50 x. 400 mm dia No. 63,865.40 xi. 450 mm dia No. 69,780.70 xii. 500 mm dia No. 80,956.50 2.105 i. 15 mm dia No. 215.00 ii. 20 mm dia No. 299.60 iii. 25 mm dia No. 339.50 iv. 32 mm dia No. 390.10 v. 40 mm dia No. 450.00 vi. 50 mm dia No. 563.90 2.106 i. 100 mm dia No. 9,062.40 Providing and fitting fixing of brass fullway valve with handle in the GI pipe line including cutting, threading etc. complete as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. Providing and fixing CIDF Pressure release valve with bolts, nuts, rubber insertions etc. complete as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. ( The tail pieces, tappers etc if required will be paid separately ) Brief Description of item Providing and fixing CIDF Butterfly valve with bolts, nuts, rubber insertions etc. complete as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. ( The tail pieces, tappers etc if required will be paid separately ) SOR for DWS works-2010.Tripura Page - 40
  • 41. Item No. unit Rate in Rs. ii. 125 mm dia No. 11,013.80 iii. 150 mm dia No. 13,033.70 iv. 200 mm dia No. 16,999.50 2.107 i. 90 mm dia No. 116.20 ii. 110 mm dia No. 145.80 iii. 140 mm dia No. 216.30 2.108 i. 90 mm dia No. 256.70 ii. 110 mm dia No. 315.90 iii. 140 mm dia No. 410.50 2.109 i. 90 mm dia No. 298.60 ii. 110 mm dia No. 491.80 iii. 140 mm dia No. 703.50 2.110 i. 90 mm dia No. 159.20 ii. 110 mm dia No. 201.50 iii. 140 mm dia No. 285.30 2.111 A. D.I. all socketted Bend 90 degree Brief Description of item Providing and fixing UPVC moulded cap conforming to IS : 7834 (Part - 8 ) complete as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. Providing and fixing UPVC moulded Union conforming to IS : 7834 (Part - 7 ) complete as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. Providing and fixing DI specials as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. Providing and fixing UPVC moulded 45 / 90 degree Elbow conforming to IS : 7834 (Part - 2 / 3 ) complete as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. Providing and fixing UPVC moulded 90 /45 degree Tee conforming to IS : 7834 (Part - 4 / 5 ) complete as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. SOR for DWS works-2010.Tripura Page - 41
  • 42. Item No. unit Rate in Rs. i. 80 mm dia No. 693.40 ii. 100 mm dia No. 852.20 iii. 150 mm dia No. 1,376.80 iv. 200 mm dia No. 2,337.10 v. 250 mm dia No. 3,442.50 vi. 300 mm dia No. 4,855.70 vii. 400 mm dia No. 10,035.60 B. D.I. all socketted Bend 45 degree i. 80 mm dia No. 548.20 ii. 100 mm dia No. 770.90 iii. 150 mm dia No. 1,005.20 iv. 200 mm dia No. 1,889.90 v. 250 mm dia No. 2,641.00 vi. 300 mm dia No. 3,670.90 vii. 400 mm dia No. 7,242.20 viii. 450 mm dia No. 9,584.90 C. D.I. all socketted Bend 22.5 degree i. 80 mm dia No. 506.40 ii. 100 mm dia No. 662.90 iii. 150 mm dia No. 943.60 iv. 200 mm dia No. 1,686.60 v. 250 mm dia No. 2,356.50 vi. 300 mm dia No. 3,194.70 vii. 400 mm dia No. 5,979.60 viii. 450 mm dia No. 7,692.80 D. D.I. all socketted Bend 11.25 degree i. 80 mm dia No. 502.90 Brief Description of item SOR for DWS works-2010.Tripura Page - 42
  • 43. Item No. unit Rate in Rs. ii. 100 mm dia No. 695.40 iii. 150 mm dia No. 964.50 iv. 200 mm dia No. 1,524.00 v. 250 mm dia No. 2,130.00 vi. 300 mm dia No. 2,915.90 vii. 400 mm dia No. 5,258.30 viii. 450 mm dia No. 6,700.90 E. D.I. all socketted cross i. 100 x 100 x 100 x 100 mm dia No. 7,658.90 ii. 150 x 150 x 150 x 150mm dia No. 18,735.00 iii. 200 x 200 x 200 x 200 mm dia No. 20,922.10 F. D.I. all socketted tee i. 80 x 80 x 80 mm dia No. 918.20 ii. 100 x 100 x 80 mm dia No. 1,076.90 iii. 100 x 100 x 100 mm dia No. 1,146.60 iv. 150 x 150 x 80 mm dia No. 1,466.50 v. 150 x 150 x 100 mm dia No. 1,394.50 vi. 150 x 150 x 150 mm dia No. 1,690.70 vii. 200 x 200 x 80 mm dia No. 2,226.90 viii. 200 x 200 x 100 mm dia No. 2,279.20 ix. 200 x 200 x 150 mm dia No. 2,592.80 x. 200 x 200 x 200 mm dia No. 2,883.20 xi. 250 x 250 x 80 mm dia No. 2,716.70 xii. 250 x 250 x 100 mm dia No. 2,925.80 xiii. 250 x 250 x 150 mm dia No. 3,245.20 xiv. 250 x 250 x 200 mm dia No. 3,756.30 xv. 250 x 250 x 250 mm dia No. 4,284.80 Brief Description of item SOR for DWS works-2010.Tripura Page - 43
  • 44. Item No. unit Rate in Rs. xvi. 300 x 300 x 80 mm dia No. 3,816.30 xvii. 300 x 300 x 100 mm dia No. 3,833.80 xviii. 300 x 300 x 150 mm dia No. 4,420.30 xix. 300 x 300 x 200 mm dia No. 5,628.30 xx. 300 x 300 x 250 mm dia No. 4,757.20 xxi. 300 x 300 x 300 mm dia No. 6,116.10 xxii. 400 x 400 x 150 mm dia No. 7,076.80 xxiii. 400 x 400 x 200 mm dia No. 7,888.70 xxiv. 400 x 400 x 250 mm dia No. 9,151.20 xxv. 450 x 450 x 450 mm dia No. 14,931.10 G. D.I. Collar both end socketted i. 80 mm dia No. 654.60 ii. 100 mm dia No. 807.60 iii. 125 mm dia No. 1,099.90 iv. 150 mm dia No. 1,276.10 v. 200 mm dia No. 1,608.00 vi. 250 mm dia No. 2,026.90 vii. 300 mm dia No. 2,695.60 viii. 400 mm dia No. 4,806.90 ix. 450 mm dia No. 5,797.60 H. D.I. Double Socketted duck foot bend i. 150 mm dia No. 2,290.60 ii. 200 mm dia No. 3,500.50 iii. 250 mm dia No. 5,691.90 iv. 450 mm dia No. 20,042.70 I. D.I. Double Socketted tapper i. 100 x 80 mm dia No. 590.90 Brief Description of item SOR for DWS works-2010.Tripura Page - 44
  • 45. Item No. unit Rate in Rs. ii. 150 x 80 mm dia No. 894.80 iii. 150 x 100 mm dia No. 941.30 iv. 200 x 80 mm dia No. 1,477.50 v. 200 x 100 mm dia No. 1,304.50 vi. 200 x 150 mm dia No. 1,512.40 vii. 250 x 100 mm dia No. 1,682.80 viii. 250 x 150 mm dia No. 2,176.40 ix. 250 x 200 mm dia No. 2,083.50 x. 300 x 150 mm dia No. 2,594.60 xi. 300 x 200 mm dia No. 2,875.30 xii. 300 x 250 mm dia No. 2,689.50 J. D.I. Flanged Socketted tail piece i. 80 mm dia No. 623.70 ii. 100 mm dia No. 730.20 iii. 125 mm dia No. 869.60 iv. 150 mm dia No. 929.70 v. 200 mm dia No. 1,470.60 vi. 250 mm dia No. 1,996.40 vii. 300 mm dia No. 2,584.90 viii. 450 mm dia No. 6,314.10 K. D.I. Flanged Spigotted tail piece i. 80 mm dia No. 647.00 ii. 100 mm dia No. 753.50 iii. 125 mm dia No. 904.50 iv. 150 mm dia No. 952.90 v. 200 mm dia No. 1,535.60 vi. 250 mm dia No. 2,292.60 Brief Description of item SOR for DWS works-2010.Tripura Page - 45
  • 46. Item No. unit Rate in Rs. vii. 300 mm dia No. 3,049.50 viii. 450 mm dia No. 8,016.90 L. D.I. Socketted end cap i. 80 mm dia No. 317.80 ii. 100 mm dia No. 393.30 iii. 150 mm dia No. 621.80 iv. 200 mm dia No. 774.70 Brief Description of item SOR for DWS works-2010.Tripura Page - 46
  • 47. Item No. unit Rate in Rs. 3.1 No. 10,899.60 3.2 No. 230.30 3.3 No. 1,475.00 3.4 No. 311.80 3.5 No. 179.10 3.6 No. 928.30 3.7 No. 272.20 3.8 No. 108.20 3.9 No. 368.80 3.10 No. 2,782.50 3.11 No. 1,644.80 3.12 No. 388.50 3.13 No. 237.30 Providing and fitting fixing Front cover for Mark-II conforming to IS : 15500 as per specification and direction of the Engineer-in-charge. Providing and fitting fixing Head assembly for Mark-II conforming to IS : 15500 as per specification and direction of the Engineer-in- charge. Providing and fitting fixing Handle assembly for Mark-II conforming to IS : 15500 as per specification and direction of the Engineer-in- charge. Providing and fitting fixing of Third plate for Mark-II conforming to IS : 15500 as per specification and direction of the Engineer-in- charge. Chapter - 3 Providing and fitting fixing of Chain with coupling for Mark-II conforming to IS : 15500 as per specification and direction of the Engineer-in-charge. Providing and fitting fixing Cylinder body with brass liner for Mark-II conforming to IS : 15500 as per specification and direction of the Engineer-in-charge. Providing and fitting fixing Plunger yoke body for Mark-II conforming to IS : 15500 as per specification and direction of the Engineer-in-charge. Providing and fitting fixing Upper valve for Mark-II conforming to IS : 15500 as per specification and direction of the Engineer-in-charge. Providing and fitting fixing Check valve for Mark-II conforming to IS : 15500 as per specification and direction of the Engineer-in- charge. Providing and fitting fixing Spacer for Mark-II conforming to IS : 15500 as per specification and direction of the Engineer-in-charge. Providing and fitting fixing Rubber seat retainer for Mark-II conforming to IS : 15500 as per specification and direction of the Engineer-in-charge. Providing and fitting fixing Mark-II complete pump set conforming to IS : 15500 ( without riser pipe & connecting rod ) as per specification and direction of the Engineer-in-charge. Providing and fitting fixing Reducer cap for Mark-II conforming to IS : 15500 as per specification and direction of the Engineer-in- charge. Spot source Brief Description of item SOR for DWS works-2010.Tripura Page - 47
  • 48. Item No. unit Rate in Rs. 3.14 No. 758.40 3.15 No. 44.20 3.16 No. 59.30 3.17 No. 51.80 3.18 No. 48.90 3.19 No. 55.30 3.20 No. 45.40 3.21 No. 248.90 3.22 No. 244.30 3.23 No. 446.70 3.24 No. 207.10 3.25 No. 295.50 3.26 No. 155.90 Providing and fitting fixing of Handle Axle for Mark-II conforming to IS : 15500 as per specification and direction of the Engineer-in- charge. Providing and fitting fixing of Connecting Rod for Mark-II conforming to IS : 15500 as per specification and direction of the Engineer-in-charge. Providing and fitting fixing of Check valve guide for Mark-II conforming to IS : 15500 as per specification and direction of the Engineer-in-charge. Providing and fitting fixing of Check valve seat for Mark-II conforming to IS : 15500 as per specification and direction of the Engineer-in-charge. Providing and fitting fixing of Upper valve guide for Mark-II conforming to IS : 15500 as per specification and direction of the Engineer-in-charge. Providing and fitting fixing of Water tank for Mark-II conforming to IS : 15500 as per specification and direction of the Engineer-in- charge. Providing and fitting fixing of Washer for Mark-II conforming to IS : 15500 as per specification and direction of the Engineer-in-charge. Providing and fitting fixing of Pump bucket for Mark-II conforming to IS : 15500 as per specification and direction of the Engineer-in- charge. Providing and fitting fixing of Rubber seating ( upper valve ) for Mark-II conforming to IS : 15500 as per specification and direction of the Engineer-in-charge. Providing and fitting fixing of Rubber seating ( lower valve ) for Mark-II conforming to IS : 15500 as per specification and direction of the Engineer-in-charge. Providing and fitting fixing of Sealing Ring for Mark-II conforming to IS : 15500 as per specification and direction of the Engineer-in- charge. Providing and fitting fixing of 'O' Ring for Mark-II conforming to IS : 15500 as per specification and direction of the Engineer-in-charge. Providing and fitting fixing of Plunger Rod for Mark-II conforming to IS : 15500 as per specification and direction of the Engineer-in- charge. Brief Description of item SOR for DWS works-2010.Tripura Page - 48
  • 49. Item No. unit Rate in Rs. 3.27 No. 161.70 3.28 No. 504.90 3.29 No. 37.20 3.30 No. 300.10 3.31 No. 79.10 3.32 No. 513.00 3.33 No. 446.70 3.34 No. 435.10 3.35 No. 11,518.40 3.36 No. 514.20 3.37 No. 537.40 3.38 No. 2,096.20 3.39 No. 352.50 3.40 No. 218.70 Providing and fitting fixing Bottom cap for Mark-III conforming to IS : 15500 as per specification and direction of the Engineer-in-charge. Providing and fitting fixing Cylinder body with brass liner for Mark-III conforming to IS : 15500 as per specification and direction of the Engineer-in-charge. Providing and fitting fixing Plunger yoke body for Mark-III conforming to IS : 15500 as per specification and direction of the Engineer-in-charge. Providing and fitting fixing Upper valve for Mark-III conforming to IS : 15500 as per specification and direction of the Engineer-in- charge. Providing and fitting fixing of C.I. base valve weight for OHP as per specification and direction of the Engineer-in-charge. Providing and fitting fixing of Follower for Mark-II conforming to IS : 15500 as per specification and direction of the Engineer-in-charge. Providing and fitting fixing Mark-III complete pump set conforming to IS : 15500 ( without riser pipe & connecting rod ) as per specification and direction of the Engineer-in-charge. Providing and fitting fixing Upper cap for Mark-III conforming to IS : 15500 as per specification and direction of the Engineer-in-charge. Brief Description of item Providing and fitting fixing of Bearing conforming to IS : 2062 for Mark-II as per specification and direction of the Engineer-in- charge. Providing and fitting fixing of C.I. base plate for OHP as per specification and direction of the Engineer-in-charge. Providing and fitting fixing of Bottom cap ( GI ) for Mark-II conforming to IS : 15500 as per specification and direction of the Engineer-in-charge. Providing and fitting fixing of Upper cap for Mark-II conforming to IS : 15500 as per specification and direction of the Engineer-in- charge. Providing and fitting fixing of Push rod for Mark-II conforming to IS : 15500 as per specification and direction of the Engineer-in- charge. Providing and fitting fixing of Cage for Mark-II conforming to IS : 15500 as per specification and direction of the Engineer-in-charge. SOR for DWS works-2010.Tripura Page - 49
  • 50. Item No. unit Rate in Rs. 3.41 No. 309.40 3.42 No. 967.80 3.43 No. 311.80 3.44 No. 207.10 3.45 No. 593.30 3.46 No. 467.60 3.47 No. 2,881.40 3.48 No. 1,723.90 3.49 No. 467.60 3.50 No. 316.40 3.51 No. 907.30 3.52 No. 123.30 3.53 No. 139.60 Providing and fitting fixing Rubber seat retainer for Mark-III conforming to IS : 15500 as per specification and direction of the Engineer-in-charge. Providing and fitting fixing Cage for Mark-III conforming to IS : 15500 as per specification and direction of the Engineer-in-charge. Providing and fitting fixing Handle Assembly for Mark-III conforming to IS : 15500 as per specification and direction of the Engineer-in- charge. Providing and fitting fixing Third plate for Mark-III conforming to IS : 15500 as per specification and direction of the Engineer-in-charge. Providing and fitting fixing Chain with coupling for Mark-III conforming to IS : 15500 as per specification and direction of the Engineer-in-charge. Providing and fitting fixing Water Tank for Mark-III conforming to IS : 15500 as per specification and direction of the Engineer-in- charge. Providing and fitting fixing Washer for Mark-III conforming to IS : 15500 as per specification and direction of the Engineer-in-charge. Providing and fitting fixing Pump bucket for Mark-III conforming to IS : 15500 as per specification and direction of the Engineer-in- charge. Providing and fitting fixing Front cover for Mark-III conforming to IS : 15500 as per specification and direction of the Engineer-in-charge. Providing and fitting fixing Head Assembly for Mark-III conforming to IS : 15500 as per specification and direction of the Engineer-in- charge. Brief Description of item Providing and fitting fixing Reducer cap for Mark-III conforming to IS : 15500 as per specification and direction of the Engineer-in- charge. Providing and fitting fixing Check valve for Mark-III conforming to IS : 15500 as per specification and direction of the Engineer-in- charge. Providing and fitting fixing Spacer for Mark-III conforming to IS : 15500 as per specification and direction of the Engineer-in-charge. SOR for DWS works-2010.Tripura Page - 50
  • 51. Item No. unit Rate in Rs. 3.54 No. 130.90 3.55 No. 128.00 3.56 No. 130.60 3.57 No. 125.60 3.58 No. 353.60 3.59 No. 323.40 3.60 No. 525.80 3.61 No. 309.40 3.62 No. 54.70 3.63 No. 207.10 3.64 No. 295.50 3.65 No. 162.90 3.66 No. 446.70 Providing and fitting fixing Bearing conforming to IS : 2062 for Mark- III as per specification and direction of the Engineer-in-charge. Providing and fitting fixing of Follower for Mark-III conforming to IS : 15500 as per specification and direction of the Engineer-in-charge. Brief Description of item Providing and fitting fixing Rubber seating ( Upper valve ) for Mark- III conforming to IS : 15500 as per specification and direction of the Engineer-in-charge. Providing and fitting fixing Rubber seating ( lower valve ) for Mark- III conforming to IS : 15500 as per specification and direction of the Engineer-in-charge. Providing and fitting fixing Sealing ring for Mark-III conforming to IS : 15500 as per specification and direction of the Engineer-in- charge. Providing and fitting fixing Handle Axle for Mark-III conforming to IS : 15500 as per specification and direction of the Engineer-in- charge. Providing and fitting fixing Connecting Rod for Mark-III conforming to IS : 15500 as per specification and direction of the Engineer-in- charge. Providing and fitting fixing Check valve seat for Mark-III conforming to IS : 15500 as per specification and direction of the Engineer-in- charge. Providing and fitting fixing Check nut for Mark- II / III conforming to IS : 15500 as per specification and direction of the Engineer-in- charge. Providing and fitting fixing Check valve guide for Mark-III conforming to IS : 15500 as per specification and direction of the Engineer-in-charge. Providing and fitting fixing Upper valve guide for Mark-III conforming to IS : 15500 as per specification and direction of the Engineer-in-charge. Providing and fitting fixing 'O' Ring for Mark-III conforming to IS : 15500 as per specification and direction of the Engineer-in-charge. Providing and fitting fixing Plunger rod for Mark-III conforming to IS : 15500 as per specification and direction of the Engineer-in- charge. SOR for DWS works-2010.Tripura Page - 51
  • 52. Item No. unit Rate in Rs. 3.67 No. 79.10 3.68 No. 1,861.30 3.69 No. 24.40 3.70 No. 26.80 3.71 No. 23.70 3.72 No. 28.40 3.73 No. 29.10 3.74 No. 24.40 3.75 No. 29.10 3.76 No. 1,997.30 3.77 No. 1,532.00 3.78 A. 150 mm NB Mtr. 943.30 B. 100 mm NB Mtr. 622.00 C. 65 mm NB Mtr. 319.40 Providing and fitting fixing Brass strainer ( 50 mm NB ) for Mark II/III as per specification and direction of the Engineer-in-charge. Providing and fitting fixing Brass strainer ( 40 mm NB ) for Mark II / III as per specification and direction of the Engineer-in-charge. Providing and fitting fixing G.I. pipe (medium class) conforming to IS : 1239 for Mark II/III as per specification and direction of the Engineer-in-charge. Providing and fitting fixing Hexagonal Bolt (M12x20) conforming to IS : 1363 for Mark-II/III as per specification and direction of the Engineer-in-charge. Providing and fitting fixing Hexagonal nut ( M12) conforming to IS : 1363 for Mark-II/III as per specification and direction of the Engineer-in-charge. Providing and fitting fixing Hexagonal Bolt ( M12x40) conforming to IS : 1363 for Mark-II/III as per specification and direction of the Engineer-in-charge. Providing and fitting fixing Hexagonal HT bolts (M11X15X40) conforming to IS : 1363 for mark II / III as per specification and direction of the Engineer-in-charge. Providing and fitting fixing Hexagonal Nylock Nut (M10 x 1.5) conforming to IS : 1363 for Mark-II/III as per specification and direction of the Engineer-in-charge. Providing and fitting fixing Hexagonal Nylock Bolt ( M10x15x40) conforming to IS : 1363 for Mark-II/III as per specification and direction of the Engineer-in-charge. Providing and fitting fixing OHP complete set as per specification and direction of the Engineer-in-charge. Providing and fitting fixing Axle washer for Mark-II/III conforming to IS : 15500 as per specification and direction of the Engineer-in- charge. Brief Description of item Providing and fitting fixing of Push rod for Mark-III conforming to IS : 15500 as per specification and direction of the Engineer-in- charge. SOR for DWS works-2010.Tripura Page - 52
  • 53. Item No. unit Rate in Rs. D. 40 mm NB Mtr. 257.10 E. 32 mm NB Mtr. 227.40 3.79 No. 531.60 3.80 No. 1,625.10 3.81 No. 2,229.90 3.82 No. 252.40 3.83 No. 6.30 3.84 No. 248.90 3.85 No. 274.50 3.86 No. 64.00 3.87 No. 74.50 3.88 No. 132.60 3.89 No. 132.60 3.90 No. 3,325.70 3.91 No. 125.50 3.92 No. 154.60 Providing and fitting fixing Nut & bolts ( 100 mm long ) for Mark II/III as per specification and direction of the Engineer-in-charge. Providing and fitting fixing Pedestal for Mark II/III as per specification and direction of the Engineer-in-charge. Providing and fitting fixing of Leather bucket conforming to IS : 1015 for OHP of approved quality as per specification and direction of the Engineer-in-charge. Providing and fitting fixing of C.I. Plunger for OHP of approved quality as per specification and direction of the Engineer-in-charge. Providing and fitting fixing C.I. Head cover for Mark II/III as per specification and direction of the Engineer-in-charge. Providing and fitting fixing C.I. Plunger for Mark II/III as per specification and direction of the Engineer-in-charge. Providing and fitting fixing G.I. Screw for Mark II/III as per specification and direction of the Engineer-in-charge. Providing and fitting fixing M.S. Piston Rod for Mark-II as per specification and direction of the Engineer-in-charge. Providing and fitting fixing M.S. Piston Rod for Mark-III as per specification and direction of the Engineer-in-charge. Providing and fitting fixing Leather bucket conforming to IS : 1015 for Mark II/III as per specification and direction of the Engineer-in- charge. Providing and fitting fixing Leather flapper valve conforming to IS : 1015 for OHP as per specification and direction of the Engineer-in- charge. Providing and fitting fixing Nut & bolts ( 70 mm long ) for Mark II / III as per specification and direction of the Engineer-in-charge. Brief Description of item Providing and fitting fixing C.I. Barrel for Mark II/III as per specification and direction of the Engineer-in-charge. Providing and fitting fixing C.I. Handle for Mark II/III as per specification and direction of the Engineer-in-charge. SOR for DWS works-2010.Tripura Page - 53
  • 54. Item No. unit Rate in Rs. 3.93 No. 107.50 3.94 Kg 158.80 3.95 No. 547.40 3.96 No. 535.10 3.97 No. 10.60 3.98 i. 40 mm dia Mtr. 371.40 3.99 No. 254.50 3.100 i. 32 mm dia. Pipe No. 28.50 ii. 40 mm dia. Pipe No. 37.90 iii. 50 mm dia. Pipe No. 47.40 iv. 65 mm dia. Pipe No. 56.90 v. 80 mm dia. Pipe No. 66.40 vi. 100 mm dia. Pipe No. 75.90 vii. 125 mm dia. Pipe No. 85.40 viii. 150 mm dia. Pipe No. 94.90 3.101 No. 37.90 Providing and fitting fixing C.I. handle for OHP of approved quality as per specification and direction of the Engineer-in-charge. Providing and fitting fixing G.I. screw for OHP of approved quality as per specification and direction of the Engineer-in-charge. Brief Description of item Providing and fitting fixing of M.S. Piston rod for OHP of approved quality as per specification and direction of the Engineer-in-charge. Providing and fitting fixing Nuts bolts for OHP of approved quality as per specification and direction of the Engineer-in-charge. Providing and fitting fixing C.I. head cover for OHP of approved quality as per specification and direction of the Engineer-in-charge. Charges for threading of G.I. pipe, as per chapter-20 of CPWD specification and direction of the Engineer-in-charge. Charges for threading of Connecting Rod, as per chapter-20 of CPWD specification and direction of the Engineer-in-charge. Providing and fitting fixing G.I. pipe (medium class) conforming to IS : 1239 for OHP of approved quality as per specification and direction of the Engineer-in-charge. Charges for fitting fixing of hand pump complete as per chapter-20 of CPWD specification and direction of the Engineer-in-charge. SOR for DWS works-2010.Tripura Page - 54
  • 55. Item No. unit Rate in Rs. 3.102 No. 554.00 3.103 No. 10,631.60 3.104 i. 40 mm dia Mtr. 88.70 3.105 A. upto 100 metre depth i. 40 mm dia Mtr. 87.20 ii. 50 mm dia Mtr. 102.30 iii. 100 mm dia Mtr. 156.80 3.106 A. upto 100 metre depth i. from 40 mm to 100 mm dia Mtr. 81.20 ii. from 40 mm to 150 mm dia Mtr. 114.90 iii. from 50 mm to 100 mm dia Mtr. 66.10 iv. from 50 mm to 150 mm dia Mtr. 94.20 v. from 100 mm to 150 mm dia Mtr. 102.90 vi. from 100 mm to 200 mm dia Mtr. 123.40 vii. from 100 mm to 250 mm dia Mtr. 148.10 viii. from 100 mm to 300 mm dia Mtr. 166.00 Providing fitting fixing of Tara Pump conforming to IS : 14106 as per specification and direction of the Engineer-in-charge. Charges for lifting of pipe by suitable method from existing non- functioning ordinary hand tubewell, as per specification and direction of the Engineer-in-charge. Charges for drilling and boring of pilot hole in any soil strata by water jet or any suitable method including collection of samples at various suitable levels and preservation of samples in polythene bags / sample boxes and disposal of excess soil or mud and maintain the pilot hole properly and required staging as per specification ( IS : 2800 ) and direction of the Engineer-in-charge. Charges for reaming of pilot hole in any soil strata by water jet or any suitable method and disposal of excess soil or mud including the cost for material as required to maintain the pilot hole properly and required staging as per specification ( IS : 2800 ) and direction of the Engineer-in-charge. Brief Description of item Charges for development of ordinary hand tube well by pumping out the turbid water till clean sand free water is obtained as per chapter-20 of CPWD specification and direction of the Engineer-in- charge. SOR for DWS works-2010.Tripura Page - 55
  • 56. Item No. unit Rate in Rs. 3.107 i. 100 mm NB Mtr. 402.10 ii. 50 mm NB Mtr. 122.80 iii. 40 mm NB Mtr. 96.00 3.108 i. 100 mm NB Mtr. 638.40 ii. 50 mm NB Mtr. 262.20 iii. 40 mm NB Mtr. 194.40 3.109 i. 40 mm No. 66.40 ii. 50 mm No. 88.90 iii. 100 mm No. 207.60 3.110 i. 100 mm NB Mtr. 51.40 ii. 50 mm NB Mtr. 29.70 iii. 40 mm NB Mtr. 27.00 3.111 i. 100 mm NB Mtr. 76.00 ii. 50 mm NB Mtr. 37.90 iii. 40 mm NB Mtr. 31.10 3.112 Charges for fitting, fixing, and lowering UPVC 'CM" casing pipe as per IS:12818 for Mark II / III / OHP as per specification and direction of the Engineer-in-charge. Charges for fitting, fixing, and lowering UPVC ribbed screen pipes as per IS:12818 for Mark II / III / OHP as per specification and direction of the Engineer-in-charge. Charges for fitting fixing of Bottom Cap ( UPVC ) as per specification and direction of the Engineer-in-charge. Brief Description of item Providing, fitting, fixing, and lowering UPVC 'CM" casing pipe as per IS:12818 for Mark II / III / OHP as per specification and direction of the Engineer-in-charge. Providing, fitting, fixing, and lowering UPVC ribbed screen pipes as per IS:12818 for Mark II / III / OHP as per specification and direction of the Engineer-in-charge. Providing and fitting fixing of Bottom Cap ( UPVC ) as per specification and direction of the Engineer-in-charge. SOR for DWS works-2010.Tripura Page - 56
  • 57. Item No. unit Rate in Rs. i. 40 mm No. 20.40 ii. 50 mm No. 24.50 iii. 100 mm No. 40.90 Brief Description of item SOR for DWS works-2010.Tripura Page - 57
  • 58. Item No. unit Rate in Rs. 4.1 A. For UPVC pipes in new work a. In all kinds of soil i. For pipes not exceeding 90 mm dia Metre 42.80 ii. Metre 54.40 iii. Metre 103.60 iv. Metre 176.60 b. In Ordinary Rock not requiring blasting i. For pipes not exceeding 90 mm dia Metre 68.40 ii. Metre 106.50 iii. Metre 166.10 iv. Metre 281.80 B. For G.I. / C.I. / D.I. pipes in new work a. In all kinds of soil i. For pipes not exceeding 90 mm dia Metre 49.00 ii. Metre 63.40 iii. Metre 119.00 For pipes exceeding 600 mm dia but not exceeding 1000 mm dia For pipes exceeding 90 mm dia but not exceeding 300 mm dia For pipes exceeding 300 mm dia but not exceeding 600 mm dia For pipes exceeding 600 mm dia but not exceeding 1000 mm dia For pipes exceeding 90 mm dia but not exceeding 300 mm dia For pipes exceeding 300 mm dia but not exceeding 600 mm dia Chapter - 4 Earth Work Brief Description of item Excavating trenches of required width for pipes, cables etc. including exacavation for sockets, dressing of sides where required, ramming of bottoms, depth upto 1500 mm including getting out the excavated soil and backfilling of soil as required after laying of pipeline, in layers not exceeding 200 mm in depth including consolidating each deposited layer by ramming, watering etc. and disposing of surplus excavated soil with all required leads as per Chapter - 2 of CPWD specification and direction of the Engineer - in - charge. For pipes exceeding 90 mm dia but not exceeding 300 mm dia For pipes exceeding 300 mm dia but not exceeding 600 mm dia SOR for DWS works-2010.Tripura Page - 58
  • 59. Item No. unit Rate in Rs. iv. Metre 201.80 b. In Ordinary Rock not requiring blasting i. For pipes not exceeding 90 mm dia Metre 78.40 ii. Metre 121.70 iii. Metre 190.30 iv. Metre 323.50 C. For UPVC pipes in old work a. In all kinds of soil i. For pipes not exceeding 90 mm OD Metre 49.20 ii. Metre 62.60 iii. Metre 119.20 iv. Metre 203.00 b. In Ordinary Rock not requiring blasting i. For pipes not exceeding 90 mm OD Metre 78.60 ii. Metre 122.40 iii. Metre 191.10 iv. Metre 324.10 D. For G.I. / C.I. / D.I. pipes in old work a. In all kinds of soil i. For pipes not exceeding 80 mm dia Metre 56.30 ii. Metre 72.90 For pipes exceeding 300 mm OD but not exceeding 600 mm OD For pipes exceeding 600 mm OD but not exceeding 1000 mm OD For pipes exceeding 600 mm OD but not exceeding 1000 mm OD For pipes exceeding 80 mm dia but not exceeding 300 mm dia Brief Description of item For pipes exceeding 600 mm dia but not exceeding 1000 mm dia For pipes exceeding 90 mm dia but not exceeding 300 mm dia For pipes exceeding 300 mm dia but not exceeding 600 mm dia For pipes exceeding 90 mm OD but not exceeding 300 mm OD For pipes exceeding 300 mm OD but not exceeding 600 mm OD For pipes exceeding 600 mm dia but not exceeding 1000 mm dia For pipes exceeding 90 mm OD but not exceeding 300 mm OD SOR for DWS works-2010.Tripura Page - 59
  • 60. Item No. unit Rate in Rs. iii. Metre 136.80 iv. Metre 232.00 b. In Ordinary Rock not requiring blasting i. For pipes not exceeding 80 mm dia Metre 90.20 ii. Metre 140.00 iii. Metre 218.80 iv. Metre 372.00 Brief Description of item For pipes exceeding 300 mm dia but not exceeding 600 mm dia For pipes exceeding 600 mm dia but not exceeding 1000 mm dia For pipes exceeding 80 mm dia but not exceeding 300 mm dia For pipes exceeding 300 mm dia but not exceeding 600 mm dia For pipes exceeding 600 mm dia but not exceeding 1000 mm dia SOR for DWS works-2010.Tripura Page - 60
  • 61. Item No. unit Rate in Rs. 5.1 i. 90 mm dia No. 103.90 ii. 110 mm dia No. 136.20 iii. 140 mm dia No. 188.90 iv. 160 mm dia No. 289.10 5.2 i. 15 mm dia No. 47.40 ii. 20 mm dia No. 64.30 iii. 25 mm dia No. 84.30 iv. 32 mm dia No. 136.20 v. 40 mm dia No. 204.70 vi. 50 mm dia No. 308.60 vii. 65 mm dia No. 802.50 viii. 80 mm dia No. 1,325.80 ix. 100 mm dia No. 1,430.30 x. 125 mm dia No. 1,534.70 xi. 150 mm dia No. 1,639.20 5.3 i. 15 x 15 x 15 mm dia No. 47.50 ii. 20 x 20 x 20 mm dia No. 58.40 iii. 25 x 25 x 25 mm dia No. 73.20 iv. 32 x 32 x 32 mm dia No. 97.10 Chapter - 5 Repair Work Brief Description of item Providing, fixing and laying fabricated UPVC socket / coupler conforming to IS : 10124 ( Part 2 ) with solvent cement conforming to IS : 14182 including testing of joints complete as per CPWD specification and direction of the Engineer - in - charge. Providing and fixing G.I. Bend /elbow in the pipe line including testing of joints complete as per CPWD specification and direction of the Engineer - in - charge. Providing and fixing G.I. equal Tee with the pipe line including testing of joints complete as per CPWD specification and direction of the Engineer - in - charge. SOR for DWS works-2010.Tripura Page - 61
  • 62. Item No. unit Rate in Rs. v. 40 x 40 x 40 mm dia No. 112.80 vi. 50 x 50 x 50 mm dia No. 163.60 vii. 65 x 65 x 65 mm dia No. 276.10 viii. 80 x 80 x 80 mm dia No. 370.60 ix. 100 x 100 x 100 mm dia No. 529.50 x. 125 x 125 x 125 mm dia No. 643.50 xi. 150 x 150 x 150 mm dia No. 752.60 5.4 i. 20 x 20 x 15 mm dia No. 60.40 ii. 25 x 25 x 20 mm dia No. 74.10 iii. 25 x 25 x 15 mm dia No. 73.20 iv. 32 x 32 x 25 mm dia No. 96.10 v. 32 x 32 x 20 mm dia No. 95.10 vi. 32 x 32 x 15 mm dia No. 94.10 vii. 40 x 40 x 15 mm dia No. 115.80 viii. 40 x 40 x 20 mm dia No. 116.80 ix. 40 x 40 x 25 mm dia No. 117.80 x. 50 x 50 x 15 mm dia No. 166.60 xi. 50 x 50 x 20 mm dia No. 167.60 xii. 50 x 50 x 25 mm dia No. 168.60 xiii. 50 x 50 x 40 mm dia No. 169.60 xiv. 65 x 65 x 15 mm dia No. 285.00 xv. 65 x 65 x 20 mm dia No. 286.10 xvi. 65 x 65 x 25 mm dia No. 287.00 xvii. 65 x 65 x 40 mm dia No. 288.10 xviii. 65 x 65 x 50 mm dia No. 289.00 Brief Description of item Providing and fixing G.I. Unequal Tee with the pipe line including testing of joints complete as per CPWD specification and direction of the Engineer - in - charge. SOR for DWS works-2010.Tripura Page - 62
  • 63. Item No. unit Rate in Rs. xix. 80 x 80 x 15 mm dia No. 396.50 xx. 80 x 80 x 20 mm dia No. 397.50 xxi. 80 x 80 x 25 mm dia No. 398.50 xxii. 80 x 80 x 40 mm dia No. 399.50 xxiii. 80 x 80 x 50 mm dia No. 400.50 xxiv. 80 x 80 x 65 mm dia No. 401.50 xxv. 100 x 100 x 40 mm dia No. 629.70 xxvi. 100 x 100 x 50 mm dia No. 630.80 xxvii. 100 x 100 x 65 mm dia No. 631.70 xxviii.100 x 100 x 80 mm dia No. 632.80 xxix. 125 x 125 x 80 mm dia No. 723.60 xxx. 125 x 125 x 100 mm dia No. 729.30 xxxi. 150 x 150 x 80 mm dia No. 802.10 xxxii. 150 x 150 x 100 mm dia No. 803.20 xxxiii.150 x 150 x 125 mm dia No. 804.10 5.5 i. 20 x 15 mm dia No. 44.60 ii. 25 x 15 mm dia No. 49.50 iii. 25 x 20 mm dia No. 50.60 iv. 32 x 15 mm dia No. 63.40 v. 32 x 20 mm dia No. 64.40 vi. 32 x 25 mm dia No. 65.40 vii. 40 x 15 mm dia No. 74.10 viii. 40 x 20 mm dia No. 75.20 ix. 40 x 25 mm dia No. 76.10 x. 50 x 15 mm dia No. 108.70 Brief Description of item Providing and fixing G.I. Reducer with the pipe line including testing of joints complete as per CPWD specification and direction of the Engineer - in - charge. SOR for DWS works-2010.Tripura Page - 63
  • 64. Item No. unit Rate in Rs. xi. 50 x 20 mm dia No. 109.70 xii. 50 x 25 mm dia No. 110.70 xiii. 50 x 40 mm dia No. 111.70 xiv. 65 x 15 mm dia No. 154.60 xv. 65 x 20 mm dia No. 155.70 xvi. 65 x 25 mm dia No. 156.60 xvii. 65 x 40 mm dia No. 157.70 xviii. 65 x 50 mm dia No. 158.60 xix. 80 x 15 mm dia No. 221.10 xx. 80 x 20 mm dia No. 222.20 xxi. 80 x 25 mm dia No. 223.10 xxii. 80 x 40 mm dia No. 224.20 xxiii. 80 x 50 mm dia No. 225.10 xxiv. 80 x65 mm dia No. 226.20 xxv. 100 x 40 mm dia No. 341.50 xxvi. 100 x 50 mm dia No. 342.60 xxvii. 100 x 65 mm dia No. 343.50 xxviii.100 x 80 mm dia No. 344.60 xxix. 125 x 40 mm dia No. 431.10 xxx. 125 x 50 mm dia No. 432.00 xxxi. 125 x 65 mm dia No. 433.10 xxxii. 125 x 80 mm dia No. 434.00 xxxiii.125 x 100 mm dia No. 435.10 xxxiv.150 x 80 mm dia No. 524.40 xxxv.150 x 100 mm dia No. 525.30 Brief Description of item SOR for DWS works-2010.Tripura Page - 64
  • 65. Item No. unit Rate in Rs. 5.6 i. 15 mm dia No. 133.50 ii. 20 mm dia No. 153.50 iii. 25 mm dia No. 173.50 iv. 32 mm dia No. 208.70 v. 40 mm dia No. 262.60 vi 50 mm dia No. 322.60 vii. 65 mm dia No. 397.80 viii. 80 mm dia No. 506.90 ix. 100 mm dia No. 631.30 5.7 i. 15 mm dia No. 29.40 ii. 20 mm dia No. 34.60 iii. 25 mm dia No. 39.50 iv. 32 mm dia No. 56.40 v. 40 mm dia No. 64.40 vi. 50 mm dia No. 89.40 vii. 65 mm dia No. 114.30 viii. 80 mm dia No. 134.20 ix. 100 mm dia No. 184.00 x. 125 mm dia No. 238.80 xi. 150 mm dia No. 298.50 5.8 i. 15 mm dia No. 50.60 Providing and fixing G.I. union as per CPWD specification and direction of the Engineer - in - charge. Brief Description of item Providing and fixing of Brass Union Joints ( Medium class ) with the pipe line including testing of joints complete as per CPWD specification and direction of the Engineer - in - charge. Providing and fixing G.I. socket as per CPWD specification and direction of the Engineer - in - charge. SOR for DWS works-2010.Tripura Page - 65
  • 66. Item No. unit Rate in Rs. ii. 20 mm dia No. 62.60 iii. 25 mm dia No. 78.50 iv. 32 mm dia No. 137.30 v. 40 mm dia No. 137.30 vi. 50 mm dia No. 199.30 vii. 65 mm dia No. 387.90 viii. 80 mm dia No. 523.60 ix. 100 mm dia No. 708.40 5.9 i. 90 mm dia No. 114.40 ii. 110 mm dia No. 153.60 iii. 140 mm dia No. 216.80 Brief Description of item UPVC moulded socket conforming to IS : 7834 (Part - 6 ) with solvent cement conforming to IS : 14182 including testing of joints complete as per CPWD specification and direction of the Engineer - in - charge. SOR for DWS works-2010.Tripura Page - 66
  • 67. Item No. unit Rate in Rs. 6.1 i. 150 mm dia mtr. 627.20 ii. 200 mm dia mtr. 857.80 iii. 500 mm dia mtr. 1,329.50 iv. 550 mm dia mtr. 1,475.70 6.2 i. from 150 mm dia pilot hole to 550 mm bore hole mtr. 913.80 ii. from 200 mm dia pilot hole to 550 mm bore hole mtr. 822.40 iii. from 150 mm dia pilot hole to 460 mm bore hole mtr. 610.00 iv. from 200 mm dia pilot hole to 460 mm bore hole mtr. 549.00 6.3 mtr. 73.10 6.4 i. 300 mm dia ERW housing pipes mtr. 292.50 ii. 200 mm dia ERW blind pipes mtr. 234.30 Reaming of pilot hole to an enlarged bore hole in any soil strata by drilling rig, disposal of excess soil or mud, including the cost for bentonite, water etc. as required to maintain the bore hole properly as per specification ( IS : 2800 (part-I)) and direction of the Engineer - in - charge. Washing of enlarged bore hole of 460 - 550 mm dia in any soil strata by drilling rig, disposal of excess soil or mud, including the cost for bentonite, water etc. as required to maintain the bore hole properly including lifting of drill pipes as per specification ( IS : 2800 (part-I)) and direction of the Engineer - in - charge. Deep Tube Well Work Brief Description of item DTW Drilling and boring pilot hole in any soil strata by Drilling rig, collection of soil samples of different strata met with during drilling at various suitable levels, preservation of samples in polythene bags / sample boxes and disposal of excess soil or mud, including the cost for bentonite, water etc. as required to maintain the pilot hole properly as per specification ( IS : 2800 (part-I)) and direction of the Engineer - in - charge. Lowering of ERW pipe including painting with anti-corrosive bitumastic paints, fixing of M.S. ring, welding of all joints etc. complete after washing of the bore hole as per specification ( IS : 2800 (part-I)) and direction of the Engineer - in - charge. ( ERW pipes will be supplied free of cost by the department from the departmental storeyard ). Chapter - 6 SOR for DWS works-2010.Tripura Page - 67
  • 68. Item No. unit Rate in Rs. iii. 200 mm dia ERW slotted pipes mtr. 244.00 iv. 150 mm dia ERW blind pipes mtr. 201.30 v. 150 mm dia ERW slotted pipes mtr. 207.10 6.5 i. for 200 mm dia ERW pipes No. 761.90 ii. for 150 mm dia ERW pipes No. 604.10 6.6 i. 300 x 200 mm dia No. 2,647.30 ii. 200 x 150 mm dia No. 1,693.70 6.7 i. pea gravels obtained from Durgapur, West Bengal. Cum 6,851.60 ii. pea gravels obtained from Golaghat, Assam. Cum 7,312.30 6.8 Cum 517.10 6.9 i. 300 mm dia No. 1,805.70 ii. 200 mm dia No. 1,483.00 iii. 150 mm dia No. 1,304.20 Providing and fixing of housing clamp ( made with 12 mm thick MS sheet ) by welding with blind pipe including applying of anti- corrusive bitumastic paint as per specification ( IS : 2800 (part-I)) and direction of the Engineer - in - charge. Providing and Shrouding of the deep tube well assembly with washed pea gravels ( 2.0 - 4.75 mm effective size ) as per specification ( IS : 4097) and direction of the Engineer - in - charge. Shrouding of the deep tube well assembly with washed pea gravels ( 2.0 - 4.75 mm effective size ) as per specification ( IS : 4097) and direction of the Engineer - in - charge. ( pea gravels will be supplied from the deptt. Free of cost from the stackyards in which the pea gravels are available.) Providing and fixing of bail plug ( made with 8 mm thick MS sheet ) by welding with blind pipe including applying of anti-corrusive bitumastic paint as per specification ( IS : 2800 (part-I)) and direction of the Engineer - in - charge. Providing and fixing of reducing socket ( made with 8 mm thick MS sheet ) by welding with blind pipe including applying of anti- corrusive bitumastic paint as per specification ( IS : 2800 (part-I)) and direction of the Engineer - in - charge. Brief Description of item SOR for DWS works-2010.Tripura Page - 68
  • 69. Item No. unit Rate in Rs. 6.10 i. using air compressor of 300 - 450 cfm output No. 23,416.90 ii. using air compressor of 1100 cfm output No. 40,232.10 6.11 i. for 300 mm dia ERW pipes No. 1,625.60 ii. for 200 mm dia ERW pipes No. 976.00 iii. for 150 mm dia ERW pipes No. 805.60 6.12 i. 100 mm dia mtr. 496.80 ii. 150 mm dia mtr. 558.80 6.13 i. from 100 mm dia pilot hole to 350 mm bore hole mtr. 288.70 ii. from 100 mm dia pilot hole to 450 mm bore hole mtr. 382.30 iii. from 150 mm dia pilot hole to 350 mm bore hole mtr. 241.80 iv. from 150 mm dia pilot hole to 450 mm bore hole mtr. 335.50 Brief Description of item Washing and development of tube well by using air compressor, and testing of the well as per specification ( IS : 11189 ) and direction of the Engineer - in - charge. Providing and fixing of well cap ( made with 8 mm thick MS sheet ) by welding with blind pipe including applying of anti-corrusive bitumastic paint as per specification ( IS : 2800 (part-I)) and direction of the Engineer - in - charge. SBDTW with mini rig Drilling and boring pilot hole in any soil strata by mini drilling rig, collection of soil samples of different strata met with during drilling at various suitable levels, preservation of samples in polythene bags / sample boxes and disposal of excess soil or mud, including the cost for bentonite, water etc. as required to maintain the pilot hole properly as per specification ( IS : 2800 (part-I)) and direction of the Engineer - in - charge. Reaming of pilot hole to an enlarged bore hole in any soil strata by mini drilling rig, disposal of excess soil or mud, including the cost for bentonite, water etc. as required to maintain the bore hole properly as per specification ( IS : 2800 (part-I)) and direction of the Engineer - in - charge. SOR for DWS works-2010.Tripura Page - 69
  • 70. Item No. unit Rate in Rs. 6.14 mtr. 54.90 6.15 A. UPVC 'CM' casing pipes i. 100 mm dia mtr. 425.10 ii. 150 mm dia mtr. 880.40 iii. 175 mm dia mtr. 1,300.70 iv. 200 mm dia mtr. 1,787.50 B. UPVC 'CS' casing pipes i. 150 mm dia mtr. 691.20 ii. 175 mm dia mtr. 1,041.90 iii. 200 mm dia mtr. 1,294.30 C. UPVC 'RS' pipes i. 100 mm dia mtr. 649.70 ii. 150 mm dia mtr. 1,263.20 iii. 175 mm dia mtr. 1,900.20 iv. 200 mm dia mtr. 2,653.10 6.16 i. 100 mm dia No. 374.50 ii. 150 mm dia No. 395.30 iii. 175 mm dia No. 414.90 iv. 200 mm dia No. 455.20 Washing of enlarged bore hole of 350 - 450 mm dia in any soil strata by mini drilling rig, disposal of excess soil or mud, including the cost for bentonite, water etc. as required to maintain the bore hole properly, including lifting of drill pipes as per specification ( IS : 2800 (part-I)) and direction of the Engineer - in - charge. Providing & lowering of UPVC pipe as per IS:12818 after washing of the bore hole by mini drilling rig as per specification and direction of the Engineer - in - charge. Providing and fixing of UPVC end cap suitable for UPVC 'CM' casing or 'CS' casing or 'RS' pipes as per specification and direction of the Engineer - in - charge. Brief Description of item SOR for DWS works-2010.Tripura Page - 70
  • 71. Item No. unit Rate in Rs. 6.17 i. 150 x 100 mm dia No. 737.30 ii. 175 x 150 mm dia No. 818.00 iii. 200 x 175 mm dia No. 979.20 iv. 200 x 150 mm dia No. 938.90 DTW with high power rig 6.18 A. upto mtr. i. 200 mm dia mtr. 902.10 ii. 320 mm dia mtr. 1,101.00 B. beyond mtr. i. 200 mm dia mtr. 1,007.10 ii. 320 mm dia mtr. 1,376.30 6.19 A. upto mtr. i. from 200 mm dia pilot hole to 550 mm bore hole mtr. 981.90 ii. from 200 mm dia pilot hole to 460 mm bore hole mtr. 786.70 iii. from 320 mm dia pilot hole to 550 mm bore hole mtr. 738.00 iv. from 320 mm dia pilot hole to 460 mm bore hole mtr. 616.10 B. beyond mtr.250.00 Providing and fixing of UPVC reducer suitable for UPVC 'CM' casing or 'CS' casing or 'RS' pipes as per specification and direction of the Engineer - in - charge. Drilling and boring pilot hole in any soil strata by deep drilling / high power rig, collection of soil samples of different strata met with during drilling at various suitable levels, preservation of samples in polythene bags / sample boxes and disposal of excess soil or mud, including the cost for bentonite, water etc. as required to maintain the pilot hole properly as per specification ( IS : 2800 (part-I)) and direction of the Engineer - in - charge. 250.00 250.00 Reaming of pilot hole to an enlarged bore hole in any soil strata by deep drilling rig, disposal of excess soil or mud, including the cost for bentonite, water etc. as required to maintain the bore hole properly as per specification ( IS : 2800 (part-I)) and direction of the Engineer - in - charge. 250.00 Brief Description of item SOR for DWS works-2010.Tripura Page - 71
  • 72. Item No. unit Rate in Rs. i. from 200 mm dia pilot hole to 550 mm bore hole mtr. 1,227.40 ii. from 200 mm dia pilot hole to 460 mm bore hole mtr. 1,074.50 iii. from 320 mm dia pilot hole to 550 mm bore hole mtr. 922.60 iv. from 320 mm dia pilot hole to 460 mm bore hole mtr. 770.10 6.20 mtr. 109.70 6.21 i. 100 mm dia mtr. 156.80 6.22 i. from 100 mm dia pilot hole to 250 mm bore hole mtr. 148.10 ii. from 100 mm dia pilot hole to 300 mm bore hole mtr. 166.00 6.23 A. 'CM' Casing pipe i. 150 mm dia mtr. 895.00 ii. 125 mm dia mtr. 646.40 iii. 100 mm dia mtr. 402.10 B. 'RS' pipe i. 100 mm dia mtr. 638.40 Brief Description of item Washing of enlarged bore hole of 460 - 550 mm dia in any soil strata by deep drilling rig, disposal of excess soil or mud, including the cost for bentonite, water etc. as required to maintain the bore hole properly including lifting of drill pipes as per specification ( IS : 2800 (part-I)) and direction of the Engineer - in - charge. SBDTW by manual means Providing & lowering of UPVC pipe as per IS:12818 after washing of the bore hole by manual means as per specification and direction of the Engineer - in - charge. Drilling and boring pilot hole in any soil strata by manual means, collection of soil samples of different strata met with during drilling at various suitable levels, preservation of samples in polythene bags / sample boxes and disposal of excess soil or mud, including the cost for water etc. as required to maintain the pilot hole properly as per specification and direction of the Engineer - in - charge. Reaming of pilot hole to an enlarged bore hole in any soil strata by manual means, disposal of excess soil or mud, including the cost for water etc. as required to maintain the bore hole properly as per specification and direction of the Engineer - in - charge. SOR for DWS works-2010.Tripura Page - 72
  • 73. Item No. unit Rate in Rs. 6.24 mtr. 12.30 Brief Description of item Washing and development of tube well by using hand pump or by any suitable method and testing of the well as per specification and direction of the Engineer - in - charge. SOR for DWS works-2010.Tripura Page - 73
  • 74. Item No. unit Rate in Rs. 7.1 No. 2,354.50 7.2 No. 2,917.30 7.3 No. 4,728.40 7.4 No. 6,784.20 7.5 No. 7,371.60 7.6 No. 11,630.10 7.7 No. 16,720.70 7.8 No. 28,468.30 Providing and fitting fixing steel sheet enclosed switch fuse unit (suitable for DIN fuses), triple pole with Neutral Link (TPN), current range 32 Amps, 415/500 Volt, L & T / Havell's/HPL make etc. complete as per specification and direction of the Engineer-in- charge. Providing and fitting fixing steel sheet enclosed switch fuse unit (suitable for DIN fuses), triple pole with Neutral Link (TPN), current range 63 Amps, 415/500 Volt, L & T / Havell's/HPL make etc. complete as per specification and direction of the Engineer-in- charge. Providing and fitting fixing of Fully Automatic Star Delta type Motor starter ( 3 ph. 50 Hz, 415V, 50 HP/37 kw Relay range within 28-42 + 10% ) in Steel Sheet Enclosures with Contractors and Timer etc. complete suitable for submersible Pump L & T, BCH, ABB make as per specification and direction of the Engineer-in-charge. Providing and fitting fixing of Fully Automatic Star Delta type Motor starter ( 3 ph. 50 Hz, 415V, 75 HP/ 55 kw Relay range within 45-75 + 10% ) in Steel Sheet Enclosures with Contractors and Timer etc. complete suitable for submersible Pump L & T, BCH, ABB make as per specification and direction of the Engineer-in-charge. Providing and fitting fixing of Fully Automatic Star Delta type Motor starter ( 3 ph. 50 Hz, 415V, 25 HP/18.5 kw Relay range within 13- 21 + 10% ) in Steel Sheet Enclosures with Contractors and Timer etc. complete suitable for submersible Pump L & T, BCH, ABB make as per specification and direction of the Engineer-in-charge. Providing and fitting fixing of Fully Automatic Star Delta type Motor starter ( 3 ph. 50 Hz, 415V, 35 HP/26 kw Relay range within 20-32 + 10% ) in Steel Sheet Enclosures with Contractors and Timer etc. complete suitable for submersible Pump L & T, BCH, ABB make as per specification and direction of the Engineer-in-charge. Chapter - 7 Providing and fitting fixing steel sheet enclosed switch fuse unit (suitable for DIN fuses), triple pole with Neutral Link (TPN), current range 100 Amps, 415/500 Volt, L & T / Havell's/HPL make etc. complete as per specification and direction of the Engineer-in- charge. Providing and fitting fixing steel sheet enclosed switch fuse unit (suitable for DIN fuses), triple pole with Neutral Link (TPN), current range 200 Amps, 415/500 Volt, L & T / Havell's/HPL make etc. complete as per specification and direction of the Engineer-in- charge. Electrical works Brief Description of item SOR for DWS works-2010.Tripura Page - 74
  • 75. Item No. unit Rate in Rs. 7.9 No. 3,787.50 7.10 i. 7/16 gauge No. 1,322.20 ii. 7/18 gauge No. 1,253.10 7.11 No. 628.80 7.12 No. 1,083.80 7.13 No. 2,765.60 7.14 No. 2,765.60 7.15 No. 2,765.60 7.16 No. 2,839.00 7.17 No. 2,985.90 Providing and fitting fixing of moving iron type, Range 0-100 V, 96 mm x 96 mm size AC Amps meter direct reading type ( L & T / AE make) with selector switch and CT coil as a electrical instrument of the pannel board as per specification and direction of the Engineer- in-charge. Providing and fitting fixing of Moulded Case Circuit Breaker (MCCB) of Thermal release range 25-32 Amps, 415 + V, 50Hz (L & T, BCH, ABB make) as per specification and direction of the Engineer-in-charge. Providing and fitting fixing of Moulded Case Circuit Breaker (MCCB) of Thermal release range 32-40 Amps, 415 + V, 50Hz (L & T, BCH, ABB make) as per specification and direction of the Engineer-in-charge. Providing and fitting fixing of Moulded Case Circuit Breaker (MCCB) of Thermal release range 50-63 Amps, 415 + V, 50Hz (L & T, BCH, ABB make) as per specification and direction of the Engineer-in-charge. Providing and fitting fixing of Moulded Case Circuit Breaker (MCCB) of Thermal release range 63-80 Amps, 415 + V, 50Hz (L & T, BCH, ABB make) as per specification and direction of the Engineer-in-charge. Providing and fitting fixing of Moulded Case Circuit Breaker (MCCB) of Thermal release range 80-100 Amps, 415 + V, 50Hz (L & T, BCH, ABB make) as per specification and direction of the Engineer-in-charge. Brief Description of item Providing and fitting fixing of 6 feet x 4 feet x 1 inch (thickness) Gamair wood pannel board for fitting fixing of electrical items, in/c 2 nos MS angle post ( size 2 inch x 2 inch x 9 feet ), nuts & bolts etc. for irrection of the same by 1:1.5:3 cement concrete casting ( 1 feet x 1 feet x 2 feet) below the ground level and painting two or more coats & plastic paint as per specification and direction of the Engineer-in-charge. Providing and fitting fixing with PVC insulated single core multistrand Copper cable conforming to IS : 694 for inter connection with all electrical equipments of the pannel board as per specification and direction of the Engineer-in-charge. Providing and fitting fixing of moving iron type, Range 0-500 V, 96 mm x 96 mm size AC Volt meter ( L & T / AE make) with selector switch as a electrical instrument of the pannel board as per specification and direction of the Engineer-in-charge. SOR for DWS works-2010.Tripura Page - 75
  • 76. Item No. unit Rate in Rs. 7.18 No. 4,992.70 7.19 No. 13,215.80 7.20 No. 6,724.90 7.21 No. 8,961.90 7.22 No. 10,240.00 7.23 No. 11,121.10 Brief Description of item Providing and fitting fixing of Moulded Case Circuit Breaker (MCCB) of Thermal release range 128-160 Amps, 415 + V, 50Hz (L & T, BCH, ABB make) as per specification and direction of the Engineer-in-charge. Providing earthing with perforated 40 mm dia G.I. pipe (Medium class) ( 12 mm dia perforation ) , 2.50 mtr. Long , laying of 4 mm dia GI wire from earth electrode to panel, including excavating hole of 600 mm dia and refilling with Salt and Charcoal / coke in alternate layers of 300 mm , as per standard specification and direction of the Engineer-in-charge. Repair and maintenance of 5 HP / 7.5 HP Motor suitable for 2500 GPH capacity submerssible pumpset by complete dismantling in/c providing & fitting fixing of PVC ( IS : 8783-1978 ) insulated electro grade copper ( IS : 613-1984 ) conductor winding in stator & all necessary spare parts and reassembling the same including servicing of rotor & necessary trial run as per specification and direction of the Engineer-in-charge. Repair and maintenance of 10 HP / 12.5 HP Motor suitable for 5000 GPH capacity submerssible pumpset by complete dismantling in/c providing & fitting fixing of PVC ( IS : 8783-1978 ) insulated electro grade copper ( IS : 613-1984 ) conductor winding in stator & all necessary spare parts and reassembling the same including servicing of rotor & necessary trial run as per specification and direction of the Engineer-in-charge. Repair and maintenance of 15 HP / 17.5 HP Motor suitable for 7500 GPH capacity submerssible pumpset by complete dismantling in/c providing & fitting fixing of PVC ( IS : 8783-1978 ) insulated electro grade copper ( IS : 613-1984 ) conductor winding in stator & all necessary spare parts and reassembling the same including servicing of rotor & necessary trial run as per specification and direction of the Engineer-in-charge. Repair and maintenance of 20 / 22.5 HP Motor suitable for 10000 GPH capacity submerssible pumpset by complete dismantling in/c providing & fitting fixing of PVC ( IS : 8783-1978 ) insulated electro grade copper ( IS : 613-1984 ) conductor winding in stator & all necessary spare parts and reassembling the same including servicing of rotor & necessary trial run as per specification and direction of the Engineer-in-charge. SOR for DWS works-2010.Tripura Page - 76
  • 77. Item No. unit Rate in Rs. 7.24 No. 14,634.20 7.25 No. 16,983.70 7.26 i. 20 HP No. 8,371.60 ii. 25 - 30 HP No. 11,318.60 iii. 35 - 40 HP No. 12,992.90 iv. 50 HP No. 16,207.70 v. 65 - 75 HP No. 20,460.40 vi. 90 - 100 HP No. 24,445.40 vii. 125 HP No. 33,152.40 viii. 170 HP No. 45,677.40 7.27 i. 1.0 - 1.5 HP No. 1,356.20 ii. 2.0 - 3.0 HP No. 2,444.50 iii. 5.0 HP No. 3,241.50 Repair and maintenance of 30 HP Motor suitable for 15000 GPH capacity submerssible pumpset by complete dismantling in/c providing & fitting fixing of PVC ( IS : 8783-1978 ) insulated electro grade copper ( IS : 613-1984 ) conductor winding in stator & all necessary spare parts and reassembling the same including servicing of rotor & necessary trial run as per specification and direction of the Engineer-in-charge. Repair and maintenance of 35/40 HP Motor suitable for 20000 GPH capacity submerssible pumpset by complete dismantling in/c providing & fitting fixing of PVC ( IS : 8783-1978 ) insulated electro grade copper ( IS : 613-1984 ) conductor winding in stator & all necessary spare parts and reassembling the same including servicing of rotor & necessary trial run as per specification and direction of the Engineer-in-charge. Rewinding of Motor suitable V.T. pumps by complete dismantling in/c providing & rewinding with Super enamelled copper conductor (as per IS : 13730 Part-3 ) conductor & all necessary spare parts and reassembling the same including servicing of rotor & necessary trial run as per specification and direction of the Engineer-in- charge. Rewinding of Horizontal Motor suitable for centrifugal pumps by complete dismantling in/c providing & rewinding with Super enamelled copper conductor (as per IS : 13730 Part-3 ) conductor & all necessary spare parts and reassembling the same including servicing of rotor & necessary trial run as per specification and direction of the Engineer-in-charge. Brief Description of item SOR for DWS works-2010.Tripura Page - 77
  • 78. Item No. unit Rate in Rs. iv. 7.5 - 10 HP No. 4,570.90 v. 12.5 - 15 HP No. 5,927.10 vi. 20 HP No. 7,601.40 vii. 25 - 30 HP No. 11,050.80 viii. 40 HP No. 13,495.30 ix. 50 HP No. 16,475.40 x. 60 HP No. 20,460.40 xi. 75 HP No. 21,364.50 xii. 100 HP No. 24,546.10 xiii. 125 HP No. 33,152.40 Brief Description of item SOR for DWS works-2010.Tripura Page - 78
  • 79. Item No. unit Rate in Rs. 8.1 i. No. 9,762.80 ii. No. 10,547.90 iii. No. 11,914.80 iv. No. 15,446.00 8.2 i. No. 19,202.20 ii. No. 23,569.00 iii. No. 30,870.70 iv. No. 39,919.70 8.3 i. For 65 mm dia G.I. pipe with 10 mm thick GI flange No. 530.20 10000 GPH capacity with 100 mm dia G.I. pipe and 10 mm thick GI flange 15000 / 20000 GPH capacity with 125 mm dia G.I. Pipe and 12 mm thick GI flange Fabrication of column pipe including providing & fitting fixing of G.I. flange by cutting the GI pipe into 3.05 mtrs. Size and welding the same with GI flange as per specification and direction of the Engineer-in-charge ( G.I. pipe will be issued by the Department at free of cost ). Installation of submerssible pump with suitable motor upto the depth of 80 ft to 100 ft by 65 / 80 / 100 / 125 mm dia GI pipe welded with GI flange in/c providing fitting fixing by necessary rubber washer, nuts & bolts, MS safety clamp etc. as per required size and making necessary electrical connection with main switch / starter with motor in/c commissioning & trial run as per direction of the Engineer-in-charge ( pump, motor with cable, 65 / 80 / 100 / 125 mm dia GI pipe for assembly will be issued by the Department at free of cost ). 2500 GPH capacity with 10 mm thick GI flange 2500 GPH capacity with 65 mm dia G.I. pipe and 10 mm thick GI flange 5000 / 7500 GPH capacity with 80 mm dia G.I. pipe and 10 mm thick GI flange Chapter - 8 Mechanical works Brief Description of item 15000 / 20000 GPH capacity with 12 mm thick GI flange Installation of submerssible pump with motor upto the depth of 100 ft by GI pipe ( conforming to IS : 1239 medium class ) with tailpiece as required welded with GI flange in/c providing fitting fixing by necessary rubber washer, nuts & bolts, MS safety clamp etc. as per required size and making necessary electrical connection with main switch / starter with motor in/c commissioning & trial run as per direction of the Engineer-in-charge (pump, motor with cable will be issued by the Department at free of cost but G.I. pipe of medium class for column assembly will be supplied by the agency at his cost). 5000 / 7500 GPH capacity with 10 mm thick GI flange 10000 GPH capacity with 10 mm thick GI flange SOR for DWS works-2010.Tripura Page - 79
  • 80. Item No. unit Rate in Rs. ii. For 80 mm dia G.I. pipe with 10 mm thick GI flange No. 591.20 iii. For 100 mm dia G.I. pipe with 10 mm thick GI flange No. 642.30 iv. For 125 mm dia G.I. pipe with 12 mm thick GI flange No. 960.40 v. For 150 mm dia G.I. pipe with 12 mm thick GI flange No. 1,094.40 8.4 i. For 65 mm dia G.I. pipe with 10 mm thick GI flange No. 1,545.00 ii. For 80 mm dia G.I. pipe with 10 mm thick GI flange No. 1,987.50 iii. For 100 mm dia G.I. pipe with 10 mm thick GI flange No. 2,662.10 iv. For 125 mm dia G.I. pipe with 12 mm thick GI flange No. 3,443.40 v. For 150 mm dia G.I. pipe with 12 mm thick GI flange No. 4,057.00 8.5 i. No. 692.10 ii. No. 188.40 iii. No. 212.90 iv. No. 1,433.70 v. No. 1,483.10 vi. No. 1,483.10 vii. No. 1,434.30 viii. No. 32.70 ix. No. 452.90 x. No. 32.70 Bronze grade LTB 2/12% chromium steel grade shaft sleeve Stainless steel pump shaft Cast iron grade (FG200) pump bowl/diffuser SS Impeller lock SS half coupling Stud bolt & nut Cast iron grade (FG200) discharge casing Cast iron grade (FG200) suction casing Brief Description of item Providing & fabrication of column pipe including fitting fixing of G.I. flange by cutting the GI pipe ( conforming to IS : 1239 medium class ) into 3.05 mtr. long and welding the same with GI flange as per specification and direction of the Engineer-in-charge ( G.I. pipe will be provided by the agency at his own cost & risk). Repair and maintenance of 2500 GPH capacity submerssible pump by complete dismantling including providing and fitting fixing of all necessary spare parts ( conforming to IS : 8034 ) and reassembling the same including machining, servicing & necessary trial run as per specification and direction of the Engineer-in-charge. Bronze/SS Impeller Bronze grade LTB 2 / Cutless rubber bush SOR for DWS works-2010.Tripura Page - 80
  • 81. Item No. unit Rate in Rs. xi. No. 1,186.50 8.6 i. No. 1,384.30 ii. No. 276.90 iii. No. 237.30 iv. No. 1,680.90 v. No. 1,680.90 vi. No. 1,680.90 vii. No. 1,884.50 viii. No. 37.60 ix. No. 502.30 x. No. 32.70 xi. No. 1,186.50 8.7 i. No. 1,878.60 ii. No. 276.90 iii. No. 237.30 iv. No. 2,175.30 v. No. 1,977.50 vi. No. 1,928.70 vii. No. 1,942.60 Repair and maintenance of 7500/10000 GPH capacity submerssible pump by complete dismantling including providing and fitting fixing of all necessary spare parts ( conforming to IS : 8034 ) and reassembling the same including machining, servicing & necessary trial run as per specification and direction of the Engineer-in-charge. Bronze/SS Impeller Cast iron grade (FG200) suction casing Cast iron grade (FG200) pump bowl/diffuser Repair and maintenance of 5000 GPH capacity submerssible pump by complete dismantling including providing and fitting fixing of all necessary spare parts ( conforming to IS : 8034 ) and reassembling the same including machining, servicing & necessary trial run as per specification and direction of the Engineer-in-charge. Bronze/SS Impeller Bronze grade LTB 2/ cutless rubber bush Bronze grade LTB 2/12% chromium steel grade shaft sleeve Stainless steel pump shaft Cast iron grade (FG200) discharge casing Cast iron grade (FG200) suction casing Cast iron grade (FG200) pump bowl/diffuser SS Impeller lock SS half coupling Bronze grade LTB 2/ cutless rubber bush Bronze grade LTB 2/12% chromium steel grade shaft sleeve Stud bolt & nut Dismantling, repairing, reassembling, servicing Stainless steel pump shaft Cast iron grade (FG200) discharge casing Brief Description of item Dismantling, repairing, reassembling, servicing SOR for DWS works-2010.Tripura Page - 81
  • 82. Item No. unit Rate in Rs. viii. No. 42.60 ix. No. 601.20 x. No. 37.60 xi. No. 1,186.50 8.8 i. No. 2,373.00 ii. No. 375.70 iii. No. 287.30 iv. No. 2,373.00 v. No. 2,175.30 vi. No. 2,175.30 vii. No. 2,291.60 viii. No. 47.50 ix. No. 798.90 x. No. 37.60 xi. No. 1,186.50 8.9 A. C.I. Impeller i. for 30000 GPH capacity centrifugal pump No. 10,265.50 ii. for 45000 / 50000 GPH capacity centrifugal pump No. 12,876.90 iii. for 62500 GPH capacity centrifugal pump No. 13,758.10 iv. for 100000 GPH capacity centrifugal pump No. 15,470.90 B. Bronze Impeller Cast iron grade (FG200) discharge casing Cast iron grade (FG200) suction casing Cast iron grade (FG200) pump bowl/diffuser SS Impeller lock SS half coupling Stud bolt & nut Dismantling, repairing, reassembling, servicing Repairing of centrifugal pumps by providing and replacing of impeller ( conforming to IS : 1520 ) as per specification and the direction of the Engineer-in-charge. Dismantling, repairing, reassembling, servicing Repair and maintenance of 15000 / 20000 GPH capacity submerssible pump by complete dismantling including providing and fitting fixing of all necessary spare parts ( conforming to IS : 8034 ) and reassembling the same including machining, servicing & necessary trial run as per specification and direction of the Engineer-in-charge. Bronze/SS Impeller Bronze grade LTB 2/ cutless rubber bush Bronze grade LTB 2/12% chromium steel grade shaft sleeve Stainless steel pump shaft Brief Description of item SS Impeller lock SS half coupling Stud bolt & nut SOR for DWS works-2010.Tripura Page - 82
  • 83. Item No. unit Rate in Rs. B. Bronze Impeller i. for 30000 GPH capacity centrifugal pump No. 21,339.40 ii. for 45000 / 50000 GPH capacity centrifugal pump No. 29,883.30 iii. for 62500 GPH capacity centrifugal pump No. 35,856.40 iv. for 100000 GPH capacity centrifugal pump No. 46,912.90 8.10 A. SS / GM Bush (sleeve) i. for 30000 GPH capacity centrifugal pump No. 1,749.50 ii. for 45000 / 50000 GPH capacity centrifugal pump No. 1,954.20 iii. for 62500 GPH capacity centrifugal pump No. 2,454.40 iv. for 100000 GPH capacity centrifugal pump No. 3,088.40 B. C.I. Bush (sleeve) i. for 30000 GPH capacity centrifugal pump No. 1,057.40 ii. for 45000 / 50000 GPH capacity centrifugal pump No. 1,262.10 iii. for 62500 GPH capacity centrifugal pump No. 1,426.10 iv. for 100000 GPH capacity centrifugal pump No. 1,961.20 8.11 i. for 30000 GPH capacity centrifugal pump No. 570.00 ii. for 45000 / 50000 GPH capacity centrifugal pump No. 617.70 iii. for 62500 GPH capacity centrifugal pump No. 665.40 iv. for 100000 GPH capacity centrifugal pump No. 713.10 8.12 i. for 30000 GPH capacity centrifugal pump No. 3,264.00 ii. for 45000 / 50000 GPH capacity centrifugal pump No. 4,200.40 Brief Description of item Repairing of centrifugal pumps by providing and replacing of Bush (sleeve) ( conforming to IS : 1520 ) as per specification and the direction of the Engineer-in-charge. Repairing of centrifugal pumps by providing and replacing of joining paper ( conforming to IS : 1520 ) as per specification and the direction of the Engineer-in-charge. Repairing of centrifugal pumps by providing and replacing of coupling ( conforming to IS : 1520 ) with necessary fitting as per specification and the direction of the Engineer-in-charge. SOR for DWS works-2010.Tripura Page - 83
  • 84. Item No. unit Rate in Rs. iii. for 62500 GPH capacity centrifugal pump No. 4,376.10 iv. for 100000 GPH capacity centrifugal pump No. 5,590.50 8.13 i. for 30000 GPH capacity centrifugal pump No. 649.10 ii. for 45000 / 50000 GPH capacity centrifugal pump No. 825.90 iii. for 62500 GPH capacity centrifugal pump No. 1,051.60 iv. for 100000 GPH capacity centrifugal pump No. 2,167.10 8.14 i. for 10000 GPH capacity V.T. pump No. 268.70 ii. for 20000 / 27500 GPH capacity V.T. pump No. 404.80 iii. for 40000 / 50000 GPH capacity V.T. pump No. 927.10 iv. for 62500 / 65000 / 75000 GPH capacity V.T. pump No. 1,005.00 v. for 100000 / 135000 GPH capacity V.T. pump No. 1,579.70 8.15 i. for 10000 GPH capacity V.T. pump No. 896.90 ii. for 20000 / 27500 GPH capacity V.T. pump No. 1,032.90 iii. for 40000 / 50000 GPH capacity V.T. pump No. 1,594.80 iv. for 62500 / 65000 / 75000 GPH capacity V.T. pump No. 1,899.60 v. for 100000 / 135000 GPH capacity V.T. pump No. 2,172.90 8.16 i. for 10000 GPH capacity V.T. pump No. 218.70 ii. for 20000 / 27500 GPH capacity V.T. pump No. 316.40 Repairing of V.T. pumps by providing and replacing of Rubber bush for bowel ( conforming to IS : 1710 ) as per specification and the direction of the Engineer-in-charge. Brief Description of item Repairing of centrifugal pumps by providing and replacing of Ball bearing ( conforming to IS : 1520 ) as per specification and the direction of the Engineer-in-charge. Repairing of V.T. pumps by providing and replacing of G.M. bush for bowel ( conforming to IS : 1710 ) as per specification and the direction of the Engineer-in-charge. Repairing of V.T. pumps by providing and replacing of G.M. bush for suction case / discharge case ( conforming to IS : 1710 ) as per specification and the direction of the Engineer-in-charge. SOR for DWS works-2010.Tripura Page - 84
  • 85. Item No. unit Rate in Rs. iii. for 40000 / 50000 GPH capacity V.T. pump No. 432.70 iv. for 62500 / 65000 / 75000 GPH capacity V.T. pump No. 545.60 v. for 100000 / 135000 GPH capacity V.T. pump No. 724.70 8.17 i. for 10000 GPH capacity V.T. pump No. 260.30 ii. for 20000 / 27500 GPH capacity V.T. pump No. 389.50 iii. for 40000 / 50000 GPH capacity V.T. pump No. 731.20 iv. for 62500 / 65000 / 75000 GPH capacity V.T. pump No. 1,033.40 v. for 100000 / 135000 GPH capacity V.T. pump No. 1,415.40 8.18 i. for 10000 GPH capacity V.T. pump No. 1,666.90 ii. for 20000 / 27500 GPH capacity V.T. pump No. 4,728.50 iii. for 40000 / 50000 GPH capacity V.T. pump No. 13,272.40 iv. for 62500 / 65000 / 75000 GPH capacity V.T. pump No. 14,104.10 v. for 100000 / 135000 GPH capacity V.T. pump No. 33,466.00 Brief Description of item Repairing of V.T. pumps by providing and replacing of MS lock ( conforming to IS : 1710 ) as per specification and the direction of the Engineer-in-charge. Repairing of V.T. pumps by providing and replacing of bronze impeller ( conforming to IS : 1710 ) as per specification and the direction of the Engineer-in-charge. SOR for DWS works-2010.Tripura Page - 85
  • 86. Item No. unit Rate in Rs. 9.1 A. Class - 3 ( working pressure 6.0 kg / cm2) i. 90 mm OD Metre 7.70 ii. 110 mm OD Metre 9.50 iii. 140 mm OD Metre 12.10 B. Class - 5 ( working pressure 10.0 kg / cm2) i. 160 mm OD Metre 15.10 9.2 i. 80 mm dia Metre 15.50 ii. 100 mm dia Metre 18.10 iii. 125 mm dia Metre 22.80 iv. 150 mm dia Metre 26.40 v. 200 mm dia Metre 34.60 vi. 250 mm dia Metre 45.40 vii. 300 mm dia Metre 56.20 viii. 350 mm dia Metre 73.40 ix. 400 mm dia Metre 87.90 x. 450 mm dia Metre 103.20 xi. 500 mm dia Metre 130.10 xii. 600 mm dia Metre 159.70 xiii. 700 mm dia Metre 201.60 Charges for laying S & S Centrifugally Cast ( Spun ) Ductile Iron Class K-7 Pipes conforming to IS : 8329 as per CPWD specification and direction of the Engineer - in - charge. Brief Description of item Charges for fixing and laying rigid UPVC pipes jointing with couplers, solvent cement including testing of joints complete ( excluding the cost of pipes, couplers, solvent cement which are to be issued from the department free of cost and specials like bend, tees etc. which will be paid separately ) as per CPWD specification and direction of the Engineer - in - charge. Chapter - 9 Miscellaneous items SOR for DWS works-2010.Tripura Page - 86
  • 87. Item No. unit Rate in Rs. xiv. 800 mm dia Metre 258.50 xv. 900 mm dia Metre 303.90 xvi. 1000 mm dia Metre 369.00 9.3 i. 80 mm dia Metre 16.80 ii. 100 mm dia Metre 20.80 iii. 150 mm dia Metre 30.60 iv. 200 mm dia Metre 40.40 v. 250 mm dia Metre 56.90 vi. 300 mm dia Metre 71.80 vii. 350 mm dia Metre 91.90 viii. 400 mm dia Metre 108.30 ix. 450 mm dia Metre 129.60 x. 500 mm dia Metre 152.80 xi. 600 mm dia Metre 186.50 xii. 700 mm dia Metre 247.00 xiii. 750 mm dia Metre 278.40 xiv. 800 mm dia Metre 296.20 xv. 900 mm dia Metre 350.90 xvi. 1000 mm dia Metre 405.30 9.4 i. 80 mm dia Metre 22.00 ii. 100 mm dia Metre 36.50 iii. 125 mm dia Metre 44.40 Item No. unit Rate in Rs. Brief Description of item Charges for laying S & S Centrifugally Cast ( Spun ) Ductile Iron Class K - 9 Pipes conforming to IS : 8329 as per CPWD specification and direction of the Engineer - in - charge. Charges for laying Doubled flanged ( Screwed / Welded ) Centrifugally cast ( Spun ) Ductile Iron Pipes of Class K - 9 conforming to IS : 8329 as per CPWD specification and direction of the Engineer - in - charge. Brief Description of item SOR for DWS works-2010.Tripura Page - 87
  • 88. iv. 150 mm dia Metre 56.60 v. 200 mm dia Metre 74.40 vi. 250 mm dia Metre 99.20 vii. 300 mm dia Metre 127.60 viii. 350 mm dia Metre 156.90 ix. 400 mm dia Metre 186.80 x. 450 mm dia Metre 224.20 xi. 500 mm dia Metre 267.90 xii. 600 mm dia Metre 362.50 xiii. 700 mm dia Metre 452.50 9.5 i. 80 mm dia Metre 21.00 ii. 100 mm dia Metre 29.40 iii. 125 mm dia Metre 38.20 iv. 150 mm dia Metre 46.90 v. 200 mm dia Metre 66.20 vi. 250 mm dia Metre 88.80 vii. 300 mm dia Metre 113.80 viii. 350 mm dia Metre 142.70 ix. 400 mm dia Metre 179.70 x. 450 mm dia Metre 224.70 xi. 500 mm dia Metre 277.50 xii. 600 mm dia Metre 367.00 9.6 i. 80 mm dia Metre 14.70 Item No. unit Rate in Rs. Charges for laying Double Flanged ( screwed / welded ) centrifugually ( Spun ) cast iron, class B ( IS : 1536 ) as per CPWD specification and direction of the Engineer - in - charge. Charges for laying S & S centrifugally cast ( spun ) iron pipes ( Class L A ) conforming to IS : 1536. as per CPWD specification and direction of the Engineer - in - charge. Brief Description of item SOR for DWS works-2010.Tripura Page - 88
  • 89. ii. 100 mm dia Metre 20.20 iii. 125 mm dia Metre 25.60 iv. 150 mm dia Metre 31.20 v. 200 mm dia Metre 44.70 vi. 250 mm dia Metre 61.70 vii. 300 mm dia Metre 80.50 viii. 350 mm dia Metre 100.50 ix. 400 mm dia Metre 122.70 x. 450 mm dia Metre 147.40 xi. 500 mm dia Metre 175.60 xii. 600 mm dia Metre 233.10 9.7 No. 12,795.70 9.8 cum 14,289.40 9.9 cum 14,169.00 9.10 No. 621.20 9.11 Hour 197.20 9.12 i. 150 mm dia. No. 259.40 Item No. unit Rate in Rs. Taking out lime stone / graded gravel / filter sand from top slab of sedimentation tank filter bed, through washing by water & placing the whole lime stone / graded gravel / filter sand at original place after washing in IRP as per specification and the direction of the Engineer-in-charge. Providing and placing rapid gravity filter sand having effective size of 0.50 mm to 1.00 mm & uniformity co-efficient of not more than 1.70 and or less than 1.30 obtained from Barakar river West Bengal as per specification and the direction of the Engineer - in - charge. Pumping out water by Diesel engine pump as per specification and the direction of the Engineer - in-charge. Charges for making G.I. Short piece i/c. cutting, threading at both end, fitting, fixing at site etc. as per specification and the direction of the Engineer-in-charge. ( G.I. pipes will be supplied from the department free of cost ). Brief Description of item Providing and placing rapid gravity filter sand having effective size of 3.00 mm to 25 mm & uniformity co-efficient of not more than 1.70 and or less than 1.30 obtained from Barakar river, West Bengal as per specification and the direction of the Engineer - in-charge. Providing and fitting fixing of water pressure meter ( 0.0 - 14.0 Kg/ sqcm.) as per relevant IS specification and the direction of the Engineer - in-charge. SOR for DWS works-2010.Tripura Page - 89
  • 90. ii. 125 mm dia. No. 233.50 iii. 100 mm dia. No. 207.50 iv. 80 mm dia. No. 181.50 v. 65 mm dia. No. 162.50 vi. 50 mm dia. No. 136.60 vii. 40 mm dia. No. 110.60 viii. 32 mm dia. No. 84.90 9.13 i. 150 x 125 mm dia. No. 447.50 ii. 150 x 100 mm dia. No. 404.60 iii. 125 x 100 mm dia. No. 379.10 iv. 100 x 80 mm dia. No. 344.10 v. 100 x 50 mm dia. No. 309.10 9.14 i. 150 mm dia No. 417.00 ii. 125 mm dia No. 354.90 iii. 100 mm dia No. 304.50 iv. 80 mm dia No. 271.20 v. 65 mm dia No. 237.80 vi. 50 mm dia No. 204.50 9.15 i. 150 mm dia No. 324.00 ii. 125 mm dia No. 285.10 Item No. unit Rate in Rs.Brief Description of item Charges for making G.I. reducer i/c. cutting, welding, threading at both end, fitting, fixing at site etc. as per specification and the direction of the Engineer-in-charge. ( G.I. pipes will be supplied from the department free of cost ). Providing & fitting fixing of G.I. flange ( 10 mm wall thickness ) by welding with G.I. / MS pipe and placing position as per specification and the direction of the Engineer-in-charge. Providing & fitting fixing of MS flange ( 8 mm wall thickness ) by welding with G.I. / MS pipe and placing position as per specification and the direction of the Engineer-in-charge. SOR for DWS works-2010.Tripura Page - 90
  • 91. iii. 100 mm dia No. 234.70 iv. 80 mm dia No. 213.00 v. 65 mm dia No. 179.70 vi. 50 mm dia No. 158.00 9.16 i. 150 mm dia No. 433.50 ii. 125 mm dia No. 387.40 iii. 100 mm dia No. 329.60 iv. 80 mm dia No. 291.70 v. 65 mm dia No. 245.50 vi. 50 mm dia No. 211.10 9.17 No. 2,349.90 9.18 i. 15 mm dia 125 mm long No. 399.60 9.19 Mtr. 556.00 9.20 No. 94.00 9.21 cum 23,920.70 9.22 Cum 391.60 Item No. unit Rate in Rs. Charges for making G.I. tail piece with MS flange ( 8 mm wall thickness ) at one end & threading at other end in/c. cutting, threading, welding & fitting, fixing as per specification and the direction of the Engineer-in-charge. ( G.I. pipes will be supplied from the department free of cost ). Providing and fitting, fixing plastic squatting plate as per relevant IS specification and the direction of the Engineer-in-charge. Providing and fitting, fixing PTMT bib cock with fancy flange conforming to IS : 781 as per specification and the direction of the Engineer-in-charge. Providing and placing of anthracite coal ( 3 mm to 6 mm) of SP gr. 1.4 in IRP as per specification & direction of the Engineer-in- charge. Lifting of filter media from package type IRP filter chamber as per specification and the direction of the Engineer-in-charge. Brief Description of item Providing and fitting fixing PVC suction hose pipes of wall thickness 6 mm. as per relevant IS specification and direction of Engineer-in- charge. Providing and fitting fixing M.S. clamp for hose pipes with nuts & bolts complete as per relevant IS specification and direction of Engineer-in-charge. SOR for DWS works-2010.Tripura Page - 91
  • 92. 9.23 Cum 639.80 9.24 Cum 446.30 9.25 Metre 105.80 9.26 No. 1,681.60 9.27 cum 6,694.10 9.28 A. by mechanical means Metre 97.50 B. by manual means Metre 130.90 9.29 i. 150 mm dia Mtr. 930.50 ii. 125 mm dia Mtr. 783.00 iii. 100 mm dia Mtr. 607.10 9.30 i. 150 mm dia Mtr. 17.50 ii. 125 mm dia Mtr. 14.70 iii. 100 mm dia Mtr. 11.80 Item No. unit Rate in Rs. Charges for lifting of pump, motor, column pipe etc. from intake well and stacking the same at suitable place as per specification and the direction of the Engineer-in-charge. Providing and spreading of lime stone of 20 mm average nominal size thoroughly washed with clear water containing chlorine contents not less then 0.75 ppm out side the lime stone bed of the I. R. plant as per specification and the direction of the Engineer-in- charge. Placing of G.I. pipe over the pump house on top portion of the R.C.C. column as per specification and the direction of the Engineer-in-charge. (excluding the G.I. pipe which will suppled free of cost from the departmental storeyard ). Brief Description of item Charges for spreading of filter media ( sand and gravel after proper cleaning and washing ) inside the package type IRP as per specification and the direction of the Engineer-in-charge. ( excluding the cost of sand and gravel ). Making road crossing by horizontal boring for smooth laying of UPVC / CI / DI / GI pipes etc. of required dia complete as per specification and the direction of the Engineer-in-charge. Providing and placing of G.I. pipe over the pump house on top portion of the R.C.C. column as per specification and the direction of the Engineer-in-charge. Charges for spreading of filter media ( sand and gravel ) inside the package type IRP as per specification and the direction of the Engineer-in-charge. ( excluding the cost of sand and gravel ). Dismantling of ASTM pipe from filter bed and stacking the same as per specification and the direction of the Engineer-in-charge. SOR for DWS works-2010.Tripura Page - 92
  • 93. 9.31 i. 150 mm dia No. 2,101.40 9.32 i. 90 mm OD No. 193.50 ii. 110 mm OD No. 211.50 iii. 140 mm OD No. 230.20 iv. 160 mm OD No. 244.60 9.33 No. 49.00 9.34 i. 90 mm dia. Metre 88.00 ii. 110 mm dia. Metre 94.30 iii. 140 mm dia. Metre 103.70 9.35 i. 6 mm dia nominal bore No. 90.40 ii. 10 mm dia nominal bore No. 99.20 iii. 15 mm dia nominal bore No. 108.00 iv. 20 mm dia nominal bore No. 125.70 v. 25 mm dia nominal bore No. 134.60 Item No. unit Rate in Rs. Providing and fitting fixing MS Foot valve as per relevant IS specification and the direction of the Engineer-in-charge. Charges for repairing of leakage in UPVC / HDPE pipe line with PVC coupler & solvent cement etc. including necessary earth excavation, backfilling of soil as required after laying of pipeline, in layers not exceeding 200 mm in depth including consolidating each deposited layer by ramming, watering etc. complete as per specification & direction of the Engineer-in-charge. Providing and fitting fixing 15 mm dia PVC / plastic bib cock conforming to IS : 9763 in hydrant points at different location as per specification & direction of the Engineer-in-charge. Charges for dismantling PVC / HDPE pipe after necessary excavation of earth including washing and stacking of pipes properly at site with all leads and lifts and backfilling of soil as required after laying of pipeline, in layers not exceeding 200 mm in depth including consolidating each deposited layer by ramming, watering etc. complete as per specification & direction of the Engineer-in-charge. Charges for making hole by drilling and making thread by thread bit in the CI / DI pipe as per specification & direction of the Engineer-in- charge. Brief Description of item SOR for DWS works-2010.Tripura Page - 93
  • 94. 9.36 No. 1,322.60 9.37 No. 1,670.20 Providing and fixing in position Precast RCC hydrant post of size 200 x 200 mm at the bottom & 150 x 150 mm at the top and 1300 mm high ( made with cement concrete 1 : 2 : 4 ( 1 cement : 2 sand : 4 brick aggregate 1st class 20 mm nominal size) and steel reinforcement ( TMT bars ) 8 mm dia 1200 mm long 4 nos and 8 mm dia stirrup 9 Nos ), 500 mm shall be kept below ground level , embedding the same with in 500 x 500 x 500 mm cement concrete 1 : 5 : 10 ( 1 cement : 5 sand : 10 brick aggregate 1st class 40 mm nominal size ) including plastering the exposed surface with 12 mm thick cement mortar 1 : 3 ( 1 cement: 3 sand ) finished with a floating coat of neat cement ) including providing & embedding 15 mm dia G.I. pipe (medium class) 1250 mm long with necessary GI fittings like elbow 2 Nos, socket 1 no, nipple 300 mm long 1 no, union 1 no etc. and fitting fixing of CI long handle bib cock by welding with GI socket complete with all earth work required including refilling as per CPWD specification and direction of Engineer-in-charge. Providing and fixing in position Precast RCC platform of size 1100 x 1100 mm x 100 mm with curb of size 50 x 50 mm keeping an opening of 100 mm long in a suitable place for draining out of water ( made with cement concrete 1 : 2 : 4 ( 1 cement : 2 sand : 4 brick aggregate 1st class 20 mm nominal size) and steel reinforcement ( TMT bars ) 8 Nos, 8 mm dia in both direction including plastering the exposed surface with 12 mm thick cement mortar 1 : 3 ( 1 cement: 3 sand ) finished with a floating coat of neat cement ) complete with all earth work required including refilling as per CPWD specification and direction of Engineer-in-charge. Chapter - 10 SOR for DWS works-2010.Tripura Page - 94
  • 95. Item No. unit Rate in Rs. 10.1 i. No. 2,874.30 ii. No. 6,610.40 10.2 i. W.C. pan with ISI marked white solid plastic seat and lid. No. 2,636.70 ii. W.C. pan with ISI marked black solid plastic seat and lid. No. 2,599.80 10.3 i. W.C. pan with ISI marked White solid plastic seat and lid. No. 4,628.30 ii. W.C. pan with ISI marked Black solid plastic seat and lid. No. 4,608.90 Item No. unit Rate in Rs. White Vitreous china Orissa pattern W.C. pan of size 580 x 440 mm with integral type foot rests. Stainless Steel AISI-304(18/8) Orissa pattern W.C. pan of size 585 x 480 mm with flush pipe and integrated type foot rests Providing and fixing white vitreous china pedestal type water closet ( European type W.C. pan ) with seat and lid, 10 litre low level white P.V.C. flushing cistern with manually controlled device ( handle lever ) conforming to IS: 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required, as per chapter 19 of CPWD specification and direction of the Engineer - in - charge. Providing and fixing white vitreous china pedestal type water closet ( European type ) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required, as per chapter 19 of CPWD specification and direction of the Engineer - in - charge. Brief Description of item Sanitary Installation Brief Description of item Providing and fixing water closet squatting pan ( Indian type W.C. pan ) with 100 mm sand cast iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device ( handle lever ) conforming to IS: 7231, with all fittings and fixtures complete including cutting and making good the wall and floors wherever required, as per chapter 19 of CPWD specification and direction of the Engineer - in - charge. SOR for DWS works-2010.Tripura Page - 95
  • 96. 10.4 i. No. 2,376.80 ii. No. 4,343.00 iii. No. 5,458.40 iv. No. 7,423.50 10.5 i. No. 4,448.20 ii. No. 7,222.90 iii. No. 9,682.20 iv. No. 12,021.40 10.6 Item No. unit Rate in Rs. Range of three urinal basin with 10 litre white P.V.C. automatic flushing cistern. Range of four urinal basin with 10 litre white P.V.C. automatic flushing cistern. Brief Description of item Range of two half stall urinal with 5 ltr. P.V.C. automatic flushing cistern. Range of three half stall urinal with 10 ltr. P.V.C. automatic flushing cistern. Range of four half stall urinal with 10 ltr. P.V.C. automatic flushing cistern. Providing and fixing one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white PVC automatic flushing cistern, with fittings, standard size GI flush pipe for back and front flush with standard spreader pipes with fittings, G.I. clamps and C.P. brass coupling complete including painting of fittings and cutting and making good the walls and floors etc. wherever required, as per chapter 19 of CPWD specification and direction of the Engineer - in - charge. Providing and fixing white vitreous china flat back half stall urinal of size 580 x 380 x 350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps ( all in C.P. brass ) with waste fitting as per IS: 2556, C.I. trap with outlet grating and other couplings in C.P. brass including painting of fittings and cutting and making good the walls and floors wherever required, as per chapter 19 of CPWD specification and direction of the Engineer - in - charge. Single half stall urinal with 5 ltr. P.V.C. automatic flushing cistern. Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430 x 260 x 350 mm and 340 x 410 x 265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I. clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required, as per chapter 19 of CPWD specification and direction of the Engineer - in - charge. One urinal basin with 5 litre white P.V.C. automatic flushing cistern. Range of two urinal basin with 5 litre white P.V.C. automatic flushing cistern. SOR for DWS works-2010.Tripura Page - 96
  • 97. i. No. 2,801.90 ii. No. 4,235.50 iii. No. 5,690.60 iv. No. 6,988.10 10.7 i. No. 1,861.30 ii. No. 1,631.80 iii. No. 1,561.10 iv. No. 1,411.80 v. No. 1,568.60 vi. No. 1,232.90 vii. No. 1,268.40 viii. No. 3,065.30 ix. No. 2,470.60 x. No. 2,849.10 xi. No. 2,627.10 Item No. unit Rate in Rs. Stainless Steel AISI-304 (18/8) Round basin 530x345 mm with single 15 mm C.P. brass pillar tap. Brief Description of item White Vitreous China wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps. White Vitreous China flat back Wash basin size 550x400mm with a single of 15mm C.P.brass pillar tap. White Vitreous China Angle back Wash basin size 600x480mm with a single of 15mm C.P.brass pillar tap. White Vitreous China Angle back Wash basin size 400x400mm with a single of 15mm C.P.brass pillar tap. White Vitreous China flat back Wash basin size 450x300mm with a single of 15mm C.P.brass pillar tap. White Vitreous China Surgeon type Wash basin size 660x460mm with a pair of 15mm C.P.brass pillar taps with White vitreous china surgeon type wash basin of size 660x460mm with single 15mm C.P.brass pillar taps with Stainless Steel AISI-304 (18/8) Round basin 405x355 mm with single 15 mm C.P. brass pillar tap. Single squatting plate with 5 ltr. P.V.C. automatic flushing cistern. White Vitreous China Wash basin size 630 x 450 mm with a pair of 15 mm C.P.brass pillar tap. White Vitreous China Wash basin size 630 x 450 mm with a single of 15 mm C.P.brass pillar tap. Range of four squatting plate with 10 ltr. P.V.C. automatic flushing cistern. Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required, as per chapter 19 of CPWD specification and direction of the Engineer - in - charge. Range of two squatting plate with 5 ltr. P.V.C. automatic flushing cistern. Range of three squatting plate with 10 ltr. P.V.C. automatic flushing cistern. SOR for DWS works-2010.Tripura Page - 97
  • 98. 10.8 No. 1,053.30 10.9 i. No. 2,383.10 10.10 A. Kitchen sink with drain board i. 510 x 1040 mm bowl depth 250 mm. No. 7,522.20 ii. 510 x 1040 mm bowl depth 225 mm. No. 7,077.70 iii. 510 x 1040 mm bowl depth 200 mm. No. 6,337.20 lv. 510 x 1040 mm bowl depth 178 mm. No. 5,171.60 B. Kitchen sink without drain board i. 610 x 510 mm bowl depth 200 mm. No. 4,157.80 ii. 610 x 460 mm bowl depth 200 mm. No. 3,862.00 iii. 470 x 420 mm bowl depth 178 mm. No. 2,529.50 10.11 i. Size 450 x 300 x 150 mm. No. 1,757.30 ii. Size 600 x 450 x 200 mm. No. 3,040.40 Item No. unit Rate in Rs. White glazed fire clay kitchen sink of size 600 x 450 x 250 mm. Providing and fixing Stainless steel AISI 304 ( 18/8 ) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required, as per chapter 19 of CPWD specification and direction of the Engineer - in - charge. Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P.brass chain with rubber plug 40 mm C.P. brass waste and 40 mm C.P. brass trap with necessary C.P. brass unions complete including painting of fittings and brackets, cutting and making good the wall wherever required, as per chapter 19 of CPWD specification and direction of the Engineer - in - charge. Brief Description of item Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings, as per chapter 19 of CPWD specification and direction of the Engineer - in - charge. Providing and fixing kitchen sink with C.I. brackets, C.P.brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required, as per chapter 19 of CPWD specification and direction of the Engineer - in - charge. SOR for DWS works-2010.Tripura Page - 98
  • 99. 10.12 i. No. 821.80 10.13 i. Long pattern W.C. pan of size 580 mm. No. 555.40 ii. Orissa pattern W.C. pan of size 580 x 440 mm. No. 1,270.20 10.14 No. 325.20 10.15 No. 1,185.80 10.16 No. 678.30 10.17 i. 250 x 130 x 30 mm No. 174.40 ii. 250 x 125 x 25 mm No. 165.90 10.18 i. 10 ltr. Capacity - White No. 893.50 ii. 10 ltr. Capacity - coloured No. 985.50 10.19 Item No. unit Rate in Rs. Providing and fixing white vitreous china water closet squatting pan ( Indian type ) as per chapter 19 of CPWD specification and direction of the Engineer - in - charge. Extra for using coloured W.C. pan instead of white W.C. pan Providing and fixing white vitreous china pedestal type ( European type / wash down type ) water closet pan, as per chapter 19 of CPWD specification and direction of the Engineer - in - charge. Extra for using coloured pedestal type W.C. pan ( European type) with low level cistern of same colour instead of white vitreous china W.C. pan and cistern, as per chapter 19 of CPWD specification and direction of the Engineer - in - charge. Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete, as per chapter 19 of CPWD specification and direction of the Engineer - in - charge. Brief Description of item Providing and fixing a pair of white vitreous china foot rests of standard pattern for squatting pan water closet, as per chapter 19 of CPWD specification and direction of the Engineer - in - charge. Providing and fixing PVC low level flushing cistern with manually controlled device ( handle lever ) conforming to IS : 7231, with all fittings and fixtures complete, as per chapter 19 of CPWD specification and direction of the Engineer - in - charge. Providing and fixing draining board with C.I. brackets including painting of brackets, cutting and making good the walls wherever required, as per chapter 19 of CPWD specification and direction of the Engineer - in - charge. White glazed fire clay draining board of size 600 x 450 x 25 mm SOR for DWS works-2010.Tripura Page - 99
  • 100. i. 10 ltr.( full flush) Capacity - white. No. 1,468.10 ii. 10 ltr.( full flush) Capacity - coloured. No. 2,089.50 10.20 i. White solid plastic seat with lid. No. 410.00 ii. Black solid plastic seat with lid. No. 390.00 10.21 No. 156.10 10.22 No. 93.90 10.23 No. 712.80 10.24 No. 1,313.70 10.25 i. Flat back wash basin of size 630 x 450 mm No. 1,090.90 ii. Flat back wash basin of size 550 x 400 mm No. 855.10 iii. Angle back wash basin of size 600 x 480 mm. No. 1,011.90 iv. Angle back wash basin of size 400 x 400 mm. No. 676.20 v. Flat back wash basin of size 450 x 300 mm. No. 698.30 vi. Surgeon type wash basin of size 660 x 460 mm. No. 1,482.30 10.26 Item No. unit Rate in Rs. Providing and fixing white vitreous china squatting plate urinal with integral rim longitudinal flush pipe, as per chapter 19 of CPWD specification and direction of the Engineer - in - charge. Providing and fixing white vitreous china wash basin including making all connectiions but excluding the cost of fittings, as per chapter 19 of CPWD specification and direction of the Engineer - in - charge. Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete, as per chapter 19 of CPWD specification and direction of the Engineer - in - charge. Extra for providing coloured other than black solid PVC plastic seat and cover in European type WC pan, instead of white plastic seat and cover as per chapter 19 of CPWD specification and direction of the Engineer - in - charge. Providing and fixing kitchen sink including making all connections excluding cost of fittings as per chapter 19 of CPWD specification and direction of the Engineer - in - charge. Brief Description of item Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan, as per chapter 19 of CPWD specification and direction of the Engineer - in - charge. Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430 x 260 x 350 mm and 340 x 410 x 265 mm sizes respectively as per chapter 19 of CPWD specification and direction of the Engineer - in - charge. SOR for DWS works-2010.Tripura Page - 100
  • 101. i. No. 2,136.00 10.27 i. Size 450 x 300 x 150 mm. No. 1,042.60 ii. Size 600 x 450 x 200 mm. No. 2,128.60 10.28 A. Semi rigid pipe i. 32 mm dia No. 51.30 ii. 40 mm dia No. 58.80 B. Flexible pipe i. 32 mm dia No. 57.30 ii. 40 mm dia No. 60.30 10.29 No. 22.80 10.30 No. 33.20 10.31 No. 578.90 10.32 i. Circular shape 450 mm dia. No. 738.50 Item No. unit Rate in Rs. Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete as per chapter 19 of CPWD specification and direction of the Engineer - in - charge. Providing and fixing 100 mm sand cast iron grating for gully trap, as per chapter 19 of CPWD specification and direction of the Engineer - in - charge. Providing and fixing in position 25 mm diameter mosquito proof coupling of approved municipal design, as per chapter 19 of CPWD specification and direction of the Engineer - in - charge. Providing and fixing 600 x 450 mm bevelled edge mirror of superior glass ( of approved quality ) complete with 6 mm thick hard board ground fixed to wooden plugs with C.P. brass screws and washers complete, as per chapter 19 of CPWD specification and direction of the Engineer - in - charge. Providing and fixing mirror of superior glass ( of approved quality ) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing, as per chapter 19 of CPWD specification and direction of the Engineer - in - charge. Brief Description of item White glazed fire clay sink of size 600 x 450 x 250 mm. Providing and fixing white vitreous china laboratory sink including making all connections excluding cost of fittings as per chapter 19 of CPWD specification and direction of the Engineer - in - charge. SOR for DWS works-2010.Tripura Page - 101
  • 102. ii. Rectangular shape 453 x 357 mm. No. 557.00 iii. Oval shape 450 x 350 mm (outer dimensions ) No. 607.90 iv. Rectangular shape 1500 x 450 mm. No. 1,278.30 10.33 No. 253.30 10.34 i. C.P. brass No. 161.80 ii. Vitreous china. No. 218.80 10.35 A. 100 mm dia. i. Sand cast iron S&S pipe as per IS: 1729 M 568.30 ii. M 924.40 B. 75 mm dia. i. Sand cast iron S & S pipe as per IS : 1729. M 499.00 ii. M 798.00 10.36 i. 75 mm dia pipe. No. 30.00 ii. 100 mm dia pipe. No. 35.40 Item No. unit Rate in Rs.Brief Description of item Providing and fixing 600 x 120 x 5 mm shelf with edges round of supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete, as per chapter 19 of CPWD specification and direction of the Engineer - in - charge. Providing and fixing toilet paper holder as per chapter 19 of CPWD specification and direction of the Engineer - in - charge. Providing and fixing soil, waste and vent pipes as per chapter 19 of CPWD specification and direction of the Engineer - in - charge. Centrifugally cast ( spun ) iron socketed pipe as per IS: 3989. Centrifugally cast ( spun ) iron socketed pipe as per IS:3989. Providing and filling the joints with spun yarn cement slurry and cement mortar 1:2 ( 1cement : 2 fine sand ) in SCI / CI pipes, as per chapter 19 of CPWD specification and direction of the Engineer - in - charge. SOR for DWS works-2010.Tripura Page - 102
  • 103. 10.37 i. For 100 mm dia. Pipe No. 78.10 ii. For 75 mm dia. Pipe No. 75.10 10.38 A. 100 mm dia. i. Sand cast iron S & S as per IS - 1729 No. 305.10 ii. Sand cast iron S & S as per IS - 3989 No. 370.80 B. 75 mm dia. i. Sand cast iron S & S as per IS - 1729 No. 267.60 ii. Sand cast iron S & S as per IS - 3989 No. 294.20 10.39 A. 100 mm dia. i. Sand cast iron S & S as per IS - 1729 No. 279.50 ii. Sand cast iron S & S as per IS - 3989 No. 301.20 B. 75 mm dia. i. Sand cast iron S & S as per IS - 1729 No. 221.20 ii Sand cast iron S & S as per IS - 3989 No. 225.60 10.40 A. 100 mm dia. i. Sand cast iron S & S as per IS - 1729 No. 307.60 Item No. unit Rate in Rs. Providing and fixing M.S. holder - bat clamps of approved design to sand cast iron / cast iron ( spun ) pipe embedded in and including cement concrete blocks 10 x 10 x 10 cm of 1 : 2 : 4 mix ( 1 cement : 2 fine sand : 4 graded stone aggregate 20 mm nominal size ) including cost of cutting holes and making good the walls etc as per chapter 19 of CPWD specification and direction of the Engineer - in - charge. Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete, as per chapter 19 of CPWD specification and direction of the Engineer - in - charge. Providing and fixing plain bend of required degree as per chapter 19 of CPWD specification and direction of the Engineer - in - charge. Providing and fixing heel rest sanitary bend as per chapter 19 of CPWD specification and direction of the Engineer - in - charge. Brief Description of item SOR for DWS works-2010.Tripura Page - 103
  • 104. ii. Sand cast iron S & S as per IS - 3989 No. 360.90 B. 75 mm dia. i. Sand cast iron S & S as per IS - 1729 No. 258.20 ii Sand cast iron S & S as per IS - 3989 No. 315.90 10.41 A. 100 x 100 x 100 x 100 mm. i. Sand cast iron S & S as per IS - 1729 No. 651.10 ii. Sand cast iron S & S as per IS - 3989 No. 779.00 B. 75 x 75 x 75 x 75 mm. i. Sand cast iron S & S as per IS - 1729 No. 520.40 ii. Sand cast iron S & S as per IS - 3989 No. 619.50 10.42 A. 100 x 100 x 100 x 100 mm. i. Sand cast iron S & S as per IS - 1729 No. 599.30 ii. Sand cast iron S & S as per IS - 3989 No. 707.40 B. 75 x 75 x 75 x 75 mm. i. Sand cast iron S & S as per IS - 1729 No. 450.20 ii Sand cast iron S & S as per IS - 3989 No. 564.30 10.43 A. 100 x 100 x 100 mm. i. Sand cast iron S & S as per IS - 1729 No. 473.40 ii. Sand cast iron S & S as per IS - 3989 No. 620.00 B. 75 x 75 x 75 mm. Item No. unit Rate in Rs. Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts & nuts complete, as per chapter 19 of CPWD specification and direction of the Engineer - in - charge. Brief Description of item Providing and fixing double equal junction of required degree with access door, insertion rubber washer 3 mm thick, bolt and nuts complete, as per chapter 19 of CPWD specification and direction of the Engineer - in - charge. Providing and fixing double equal plain junction of required degree, as per chapter 19 of CPWD specification and direction of the Engineer - in - charge. SOR for DWS works-2010.Tripura Page - 104
  • 105. i. Sand cast iron S & S as per IS - 1729 No. 358.90 ii. Sand cast iron S & S as per IS - 3989 No. 460.70 10.44 A. 100 x 100 x 100 mm. i. Sand cast iron S & S as per IS - 1729 No. 408.30 ii. Sand cast iron S & S as per IS - 3989 No. 559.30 B. 75 x 75 x 75 mm. i. Sand cast iron S & S as per IS - 1729 No. 315.50 ii. Sand cast iron S & S as per IS - 3989 No. 420.60 10.45 A. 100 x 100 x 75 x75 mm. i. Sand cast iron S & S as per IS - 1729 No. 704.50 ii. Sand cast iron S & S as per IS - 3989 No. 1,070.20 10.46 A. 100 x 100 x 75 x75 mm. i. Sand cast iron S & S as per IS - 1729 No. 642.20 ii. Sand cast iron S & S as per IS - 3989 No. 962.10 10.47 A. 100 x 100 x75 mm. i. Sand cast iron S & S as per IS - 1729 No. 509.00 ii. Sand cast iron S & S as per IS - 3989 No. 808.10 Item No. unit Rate in Rs. Providing and fixing double unequal plain junction of required degree, as per chapter 19 of CPWD specification and direction of the Engineer - in - charge. Providing and fixing single unequal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete, as per chapter 19 of CPWD specification and direction of the Engineer - in - charge. Brief Description of item Providing and fixing single equal plain junction of required degree, as per chapter 19 of CPWD specification and direction of the Engineer - in - charge. Providing and fixing double unequal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete, as per chapter 19 of CPWD specification and direction of the Engineer - in - charge. SOR for DWS works-2010.Tripura Page - 105
  • 106. 10.48 A. 100 x 100 x 75 mm. i. Sand cast iron S & S as per IS - 1729 No. 442.30 ii. Sand cast iron S & S as per IS - 3989 No. 698.50 10.49 A. 100 x 100 x100 x 100 mm. i. Sand cast iron S & S as per IS - 1729 No. 640.80 ii. Sand cast iron S & S as per IS - 3989 No. 630.90 B. 75 x 75 x75 x 75 mm. i. Sand cast iron S & S as per IS - 1729 No. 478.90 ii. Sand cast iron S & S as per IS - 3989 No. 508.50 10.50 A. 100 x 100 x 100 mm. i. Sand cast iron S & S as per IS - 1729 No. 491.20 ii. Sand cast iron S & S as per IS - 3989 No. 497.10 B. 75 x 75 x75 mm. i. Sand cast iron S & S as per IS - 1729 No. 365.80 ii. Sand cast iron S & S as per IS - 3989 No. 377.60 10.51 A. 100 x 100 x 75 x75 mm. i. Sand cast iron S & S as per IS - 1729 No. 694.10 ii. Sand cast iron S & S as per IS - 3989 No. 865.90 Item No. unit Rate in Rs. Providing and fixing double equal plain invert branch of required degree, as per chapter 19 of CPWD specification and direction of the Engineer - in - charge. Providing and fixing single equal plain invert branch of required degree, as per chapter 19 of CPWD specification and direction of the Engineer - in - charge. Providing and fixing single unequal plain junction of required degree, as per chapter 19 of CPWD specification and direction of the Engineer - in - charge. Providing and fixing double unequal invert branch of required degree, as per chapter 19 of CPWD specification and direction of the Engineer - in - charge. Brief Description of item SOR for DWS works-2010.Tripura Page - 106
  • 107. 10.52 A. 100 x 100 x 75 mm. i. Sand cast iron S & S as per IS - 1729 No. 581.60 ii. Sand cast iron S & S as per IS - 3989 No. 640.80 10.53 A. 76 mm offsets i. With 75 mm dia. Pipe. No. 198.50 ii. With 100 mm dia. Pipe. No. 337.70 B. 114 mm offsets i. With 75 mm dia. Pipe. No. 341.60 ii. With 100 mm dia. Pipe. No. 443.80 C. 152 mm offsets i. With 75 mm dia. Pipe. No. 428.90 ii. With 100 mm dia. Pipe. No. 556.40 10.54 A. 75 mm offsets i. With 75 mm dia. Pipe. No. 276.90 B. 150 mm offsets i. With 75 mm dia. Pipe. No. 350.00 ii. With 100 mm dia. Pipe. No. 473.00 10.55 A. 100 mm i. Sand cast iron S&S as per IS: 1729. No. 464.50 Item No. unit Rate in Rs.Brief Description of item Providing and fixing sand cast iron S&S offsets as per IS: 3989, as per chapter 19 of CPWD specification and direction of the Engineer - in - charge. Providing and fixing door piece, insertion rubber washer 3 mm thick, bolts & nuts complete, as per chapter 19 of CPWD specification and direction of the Engineer - in - charge. Providing and fixing single unequal plain invert branch of required degree, as per chapter 19 of CPWD specification and direction of the Engineer - in - charge. Providing and fixing sand cast iron S & S offsets as per IS: 1729, as per chapter 19 of CPWD specification and direction of the Engineer - in - charge. SOR for DWS works-2010.Tripura Page - 107
  • 108. ii. Sand cast iron S&S as per IS: 3989. No. 374.20 B. 75 mm i. Sand cast iron S&S as per IS: 1729. No. 337.70 ii. Sand cast iron S&S as per IS: 3989. No. 285.80 10.56 A. 100 mm i. Sand cast iron S&S as per IS: 1729. No. 240.90 ii. Sand cast iron S&S as per IS: 3989. No. 243.90 B. 75 mm i. Sand cast iron S&S as per IS: 1729. No. 173.30 ii. Sand cast iron S&S as per IS: 3989. No. 222.20 10.57 A. 100 mm i. Sand cast iron S&S as per IS: 1729. No. 178.80 ii. Sand cast iron S&S as per IS: 3989. No. 254.30 B. 75 mm i. Sand cast iron S&S as per IS: 1729. No. 133.30 ii. Sand cast iron S&S as per IS: 3989. No. 182.10 10.58 i 100 mm No. 207.50 ii. 75 mm No. 178.70 iii. 50 mm No. 146.40 Item No. unit Rate in Rs. Providing and fixing terminal guard as per chapter 19 of CPWD specification and direction of the Engineer - in - charge. Providing and fixing color as per chapter 19 of CPWD specification and direction of the Engineer - in - charge. Providing lead caulked joints to sand cast iron / centrifugually cast ( spun ) iron pipe & fittings of diameter, as per chapter 19 of CPWD specification and direction of the Engineer - in - charge. Brief Description of item SOR for DWS works-2010.Tripura Page - 108
  • 109. 10.59 i. 100 mm No. 57.30 ii. 75 mm No. 50.10 iii. 50 mm No. 41.50 10.60 A. 100 mm inlet and 100 mm outlet i. Sand cast iron S&S as per IS: 3989 No. 674.10 ii. Sand cast iron S&S as per IS: 1729 No. 544.20 B. 100 mm inlet and 75 mm outlet i. Sand cast iron S&S as per IS: 3989 No. 711.50 ii. Sand cast iron S&S as per IS: 1729 No. 459.70 10.61 i. 100 mm dia. No. 187.70 ii. 75 mm dia. No. 140.20 iii. 50 mm dia. No. 117.70 10.62 No. 260.40 Item No. unit Rate in Rs. Painting C.I. cistern with bitumastic or any other anti - corrosive paint inside and white paint over a coat of zinc chromate yellow primer ( of approved quality ) on the outside surface of the cistern flush pipe, other fittings, etc. complete for new work, as per CPWD specification and direction of the Engineer - in - charge Brief Description of item Providing and fixing M.S. stays and clamps for sand cast iron / centrifugually cast ( spun ) iron pipe & fittings of diameter, as per chapter 19 of CPWD specification and direction of the Engineer - in - charge. Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors, as per chapter 19 of CPWD specification and direction of the Engineer - in - charge. Cutting chases in brick masonary walls sand cast iron / centrifugually cast ( spun ) iron pipes and making good the same with cement concrete 1 : 3 : 6 (1 cement : 3 fine sand : 6 graded stone aggregate 12.5 mm nominal size ) including necessary plaster and pointing in cement mortar 1 : 4 (1 cement : 4 fine sand ), as per chapter 19 of CPWD specification and direction of the Engineer - in - charge. SOR for DWS works-2010.Tripura Page - 109
  • 110. 10.63 No. 174.90 10.64 No. 77.80 10.65 i. 100 mm dia Mtr. 22.20 ii. 75 mm dia Mtr. 16.50 iii. 50 mm dia Mtr. 10.80 10.66 i. 100 mm diameter pipe. Mtr. 9.50 ii. 75 mm diameter pipe. Mtr. 6.30 iii. 50 mm diameter pipe. Mtr. 4.60 10.67 No. 261.30 Item No. unit Rate in Rs. Painting sand cast iron / centrifugually cast (spun) iron soil, waste vent pipes and fittings with synthetic enamel paint of any colour such as chocolate grey, or buff etc. over a coat of primer (of approved quality) for new work, as per chapter 19 of CPWD specification and direction of the Engineer - in - charge. Repainting sand cast iron / centrifugually cast ( spun ) iron soil, waste vent pipes and fittings with paint of any colour such as chocolate grey, or buff etc, as per chapter 19 of CPWD specification and direction of the Engineer - in - charge. Repainting bath tub of size 1700 x 730 x 430 mm with enamel paint.as per chapter 19 of CPWD specification and direction of the Engineer - in - charge. Brief Description of item Re - painting C.I. cistern with bitumastic or any other anti - corrosive paint inside and white paint on the outside surface of the cistern , flush pipe, other fittings, etc. complete including polishing of wooden seat and lid & cleaning of W.C. pan with acid wherever necessary, as per chapter 19 of CPWD specification and direction of the Engineer - in - charge. Re - painting C.I. cistern with synthetic enamel paint of approved colour brand and manufacturer on the outside surface of cistern flush pipe, other fittings etc. complete, as per chapter 19 of CPWD specification and direction of the Engineer - in - charge. SOR for DWS works-2010.Tripura Page - 110
  • 111. 10.68 A. No. 5,885.80 10.69 A. No. 90.40 B. No. 121.50 10.70 A. No. 460.50 B. No. 497.60 10.71 No. 205.80 Item No. unit Rate in Rs. Providing & fixing PTMT Waste Coupling for wash basin and sink of approved quality and colour, as per chapter 19 of CPWD specification and direction of the Engineer - in - charge. Waste coupling 3.1 mm of 79 mm length and 62 mm breadth weighing not less than 45 gms. Waste coupling 38 mm of 83 mm length and 77 mm breadth, weighing not less than 60 gms. Providing & fixing PTMT Bottle Trap for Wash basin and sink, as per chapter 19 of CPWD specification and direction of the Engineer - in - charge. Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the bracket of the same materials with snap fittings of approved quality and colours weighing not less than 105 gms, as per chapter 19 of CPWD specification and direction of the Engineer - in - charge. Brief Description of item Bottle trap 31 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms. Bottle trap 38 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling 77 mm breadth with 25 mm minimum water seal, weighing not less than 263 gms. Providing & fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet ( Anglo Indian W.C. pan ) with seat lid with C.P. brass hinges and rubber buffers, 10 litre low level flushing cister with fitting and brackets, 40 mm flush bend 20 mm over flow pipe with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required, as per chapter 19 of CPWD specification and direction of the Engineer - in - charge. White vitreous china dual purpose WC pan with white solid plastic seat and lid with white vitreous china flushing cistern and C.P. flush bend. SOR for DWS works-2010.Tripura Page - 111
  • 112. 10.72 No. 183.60 10.73 i. No. 344.40 ii. No. 388.90 10.74 No. 440.70 10.75 No. 184.80 10.76 i. No. 140.40 10.77 Item No. unit Rate in Rs. Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality & colour, weighing not less than 300 gms, as per chapter 19 of CPWD specification and direction of the Engineer - in - charge. Providing and fixing PTMT 15 mm Urinal spreader size 95 x 69 x 100 mm with 1/2 " BSP thread and shapes, weighing not less than 60 gms, as per chapter 19 of CPWD specification and direction of the Engineer - in - charge. Providing and fixing M.S. holder bat clamp of approved design to sand cast iron / cast iron ( spun ) pipes comprising of MS flat brackets made of 50 x 5 mm flat of specified shape, projecting 75 mm outside the wall surface and fixed on wall with 4 nos, 6 mm dia expansion hold fasteners including drilling necessary holes in brick wall / CC / RCC surface and the cost of bolts etc. The pipes shall be fixed to the already fixed brackets with the help of 30 mm x 1.6 mm galvanised MS flats of specified shape and of total length 420 mm and shall be fixed with MS nuts,blts & washers of size 25 x 6 mm,one bolts on No. side of the pipe, as per chapter 19 of CPWD specification and direction of the Engineer - in - charge. Brief Description of item Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with a minimum distances of 37 mm frm wall face with concealed fittings arrangemnt of approved quality and colours weighing not less than 80 gms, as per chapter 19 of CPWD specification and direction of the Engineer - in - charge. Providing and fixing PTMT towel rail complete with brackets fixed to wooden plugs with CP brass screws with concealed fitting arrangement of approved quality and colour, as per chapter 19 of CPWD specification and direction of the Engineer - in - charge. Providing and fixing PTMT Urinal cock of approved quality and colour, as per chapter 19 of CPWD specification and direction of the Engineer - in - charge. 15 mm nominal bore, 80 mm long, 42 mm high and 30 mm wide with BSP female threads weighing not less than 48 gms. 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. SOR for DWS works-2010.Tripura Page - 112
  • 113. i. No. 182.20 ii. No. 213.30 iii. No. 244.30 Total bracket length 580 mm of approved shape and design ( for single 100 mm dia pipe.) Total bracket length 810 mm of approved shape and design ( for single 100 mm dia pipe.) Total bracket length 1040 mm of approved shape and design ( for three 100 mm dia pipes ). Chapter - 11 SOR for DWS works-2010.Tripura Page - 113
  • 114. Item No. unit Rate in Rs. 11.1 A. 2500 G.P.H. capacity No. 534,100.00 B. 5000 G.P.H. capacity No. 802,100.00 C. 10000 G.P.H. capacity No. 1,216,800.00 Providing, installation and commissioning of package type Iron Removal Plant comprising of Iron Removal Filter of dual media filter with anthracite coal, filter gravel, polypropelene double hexagonal nut strainer etc., mixing chamber for coagulants like sodium alluminates etc., oxidation chamber with manganese dioxide , metering pump for coagulant dosing, air compressor of suitable capacity with motor, back washing arrangements, disinfection with sodium hypochlorite solution through metering pump, all necessary pipes for raw water collection, inter connecting all the chambers, delivery outlet as necessary with 150 mm dia MS pipe alongwith all related civil, mechanical and Electrical works etc. complete as per approved process flow, technical specification and direction of the Engineer - in - charge. Iron Removal Plants Brief Description of item SOR for DWS works-2010.Tripura Page - 114