CLASS 15:Machine Design Wed(May 2)STUDENT: WALTER HECTOR GONZALES ARNAO                                        Fab academy...
summary design or modify a machine  document the group project and your individualcontribution  make the passive parts and...
Summary machine assembled 1-The assignmente for this week is to automate the machine assembledtwo weeks ago2-MISSING PARTS...
Summary project loom1-the manufacture of items in acrylic.2-work is the accuracy and efficiency of the control wiremodels ...
Project loom1. Mobile elements are tested2. proceed to install the micro servo                                            ...
Loom assembled1.In order to control the micro servo requires programming in c2. will be used to work past weeks servos sea...
Conclusions.1. The construction of the card with the microcontroller and the light sensor issimple, however because we wel...
Conclusions.1. was presented in the armed2. you need 4 servos for the loom3. By now the task is in progress.       CLASS 1...
Upcoming SlideShare
Loading in...5
×

15.machine design wed (may 2)

543

Published on

15.machine design wed (may 2)
UNIVERSIDAD NACIONAL DE INGENIERIA FACULTAD DE ARQUITECTURA URBANISMO Y ARTES WALTER GONZALES ARNAO

Published in: Business, Technology
0 Comments
0 Likes
Statistics
Notes
  • Be the first to comment

  • Be the first to like this

No Downloads
Views
Total Views
543
On Slideshare
0
From Embeds
0
Number of Embeds
2
Actions
Shares
0
Downloads
1
Comments
0
Likes
0
Embeds 0
No embeds

No notes for slide

15.machine design wed (may 2)

  1. 1. CLASS 15:Machine Design Wed(May 2)STUDENT: WALTER HECTOR GONZALES ARNAO Fab academy 2012 UNIVERSIDAD NACIONAL DE INGENIERÍA FACULTAD DE ARQUITECTURA, URBANISMO Y ARTES
  2. 2. summary design or modify a machine document the group project and your individualcontribution make the passive parts and operate it manually Fab academy UNIVERSIDAD NACIONAL DE INGENIERÍACLASS 15: Machine Design Wed (May 2) FACULTAD DE ARQUITECTURA, URBANISMO Y ARTES
  3. 3. Summary machine assembled 1-The assignmente for this week is to automate the machine assembledtwo weeks ago2-MISSING PARTS OF THE MACHINE Fab3-Stepper motor driver, so as was impossible to get it locally4-Roberto, Roxana and Alejandro are making the connections of each Hbridge board to each stepper motor and test the Switching PS5-For complete the assembling we connect the Arduino to the notebook and academyto each board. the machine ready to be operated in automate mode.installed the software, was necesary modify controlling the new boards6- work is being completed UNIVERSIDAD NACIONAL DE INGENIERÍACLASS 15: Machine Design Wed (May 2) FACULTAD DE ARQUITECTURA, URBANISMO Y ARTES
  4. 4. Summary project loom1-the manufacture of items in acrylic.2-work is the accuracy and efficiency of the control wiremodels Fab academy UNIVERSIDAD NACIONAL DE INGENIERÍACLASS 15: Machine Design Wed (May 2) FACULTAD DE ARQUITECTURA, URBANISMO Y ARTES
  5. 5. Project loom1. Mobile elements are tested2. proceed to install the micro servo Fab3. I asked for help to our colleagues, for the programming, the support that but Iwas Rimarachin academy CLASS 15: Machine Design Wed (May 2) 2012 UNIVERSIDAD NACIONAL DE INGENIERÍA FACULTAD DE ARQUITECTURA, URBANISMO Y ARTES
  6. 6. Loom assembled1.In order to control the micro servo requires programming in c2. will be used to work past weeks servos sealizo Fab academy CLASS 15: Machine Design Wed (May 2) 2012 UNIVERSIDAD NACIONAL DE INGENIERÍA FACULTAD DE ARQUITECTURA, URBANISMO Y ARTES
  7. 7. Conclusions.1. The construction of the card with the microcontroller and the light sensor issimple, however because we weld the parts. All information take it from the Fabtutorials 2. The second part is complicated by the programming of the microcontroller,which was displayed not bar recognition of the sensor in your computer monitor.3. By now the task is in progress. academy CLASS 15: Machine Design Wed (May 2) 2012 UNIVERSIDAD NACIONAL DE INGENIERÍA FACULTAD DE ARQUITECTURA, URBANISMO Y ARTES
  8. 8. Conclusions.1. was presented in the armed2. you need 4 servos for the loom3. By now the task is in progress. CLASS 15: Machine Design Wed (May 2) UNIVERSIDAD NACIONAL DE INGENIERÍA FACULTAD DE ARQUITECTURA, URBANISMO Y ARTES
  1. A particular slide catching your eye?

    Clipping is a handy way to collect important slides you want to go back to later.

×