Apollo Insulation Aluminum Composite Foils - Catalog 2012

  • 462 views
Uploaded on

Apollo Insulation foils reflect more than 96% of radiating heat, reduce carbon emissions and last for life. …

Apollo Insulation foils reflect more than 96% of radiating heat, reduce carbon emissions and last for life.
They are used for building insulation, pipe and vent insulation and cladding, foam panel and sandwich panel insulation.

More in: Technology , Business
  • Full Name Full Name Comment goes here.
    Are you sure you want to
    Your message goes here
    Be the first to comment
No Downloads

Views

Total Views
462
On Slideshare
0
From Embeds
0
Number of Embeds
0

Actions

Shares
Downloads
8
Comments
0
Likes
1

Embeds 0

No embeds

Report content

Flagged as inappropriate Flag as inappropriate
Flag as inappropriate

Select your reason for flagging this presentation as inappropriate.

Cancel
    No notes for slide
  • ThermoFoil® ES
  • ThermoFoil® ES
  • ThermoFoil® ES
  • ThermoFoil® ES
  • ThermoFoil® ES
  • ThermoFoil® ES
  • ThermoFoil® ES
  • ThermoFoil® ES
  • ThermoFoil® ES
  • ThermoFoil® ES
  • ThermoFoil® ES
  • ThermoFoil® ES
  • ThermoFoil® ES
  • ThermoFoil® ES
  • ThermoFoil® ES
  • ThermoFoil® ES

Transcript

  • 1. madein UK Insulation & Carbon Emission Reduction for Life ECO-FOIL™ THERMO-FOIL ES™ ECO-BRITE™ ENCA-SEAL™ ENCA-CLAD™ INSUFLECT™ TERRETHENE™ ADHESIVE TAPES BS476 fire rated w w w. t r a d i n g g r e e n l t d . c o m
  • 2. Standard ThermoFoil®ES ThermoFoil® Tape Eco-Brite® Agriliner™ EncaSeal™ 150PE EncaSeal™ Tape EncaClad™ EcoFoil™ Terrethene™ floor, ceiling, floor, ceiling, roof, roof: livestock indoors: pipes, A/C ducts, outdoors: indoors ceiling, Recommended usage roof, walls sub-surface in UK made roof, wall wall houses ducts, vents pipes, tanks pipes/ducts/vents walls Reflectivity ASTM E903 96.7% 96.1% 96.1% 96.7% 96.1% 96.1% 96.1% 96.0% Emissivity ASTM E408 0.046 0.048 0.048 0.046 0.048 0.048 0.048 0.05 Manufacturer guarantee (years) 20 20 20 20 20 20 20 10 20 Expected lifespan (years) 60+ 60+ 60+ 60+ 60+ 60+ 60+ 20+ 60+ Carbon Emissions Saved per SQM, per year up to 23kg up to 23kg up to 23kg up to 23kg up to 23kg up to 23kg up to 23kg up to 23kg Roll size (widht x length) 1.25m x 96m 1.25m x 96m 100m x 5cm 1.25m x 96m 1.25m x 96m 1.25m x 96m 100m x 5cm 1.25m x 33m 1.25m x 96m 1.195m x 50m Roll surface in SQM 120m2 120m2 5m2 120m2 120m2 120m2 5m2 41.25m2 120m2 60m2 Roll weight kg 18 1.1 18 18 20 1.1 20 18 24.8 Nominal thickness microns 145 145 135 145 150 150 345 91 460 ASTM D882 Tensile MD 6.620kN/m 3.905kN/m 3.905kN/m 6.620kN/m 6.620kN/m 6.620kN/m 5.900kN/m N/A 9.45kN/M Tear resistant machine direction Trouser tear MD 33.1N N/A 10.2N 33.1N N/A N/A N/A N/A Elongation at break MD 222.60% N/A 232.80% 222.60% N/A N/A N/A N/A ASTM D882 Tensile CD 5.487kN/m 4.096kN/m 4.096kN/m 5.487kN/m 5.000kN/m 5.000kN/m 4.900kN/m N/A Tear resistant cross direction Trouser tear CD 33.9N N/A 15.6N 33.9N N/A N/A N/A N/A Elongation at break CD 210% 150% 100.40% 210% 150% 150% N/A N/A Beach Puncture Resistance 40.1kg-cm 40.5kg-cm 40.5kg-cm 40.1kg-cm 40.5kg-cm 41.1kg-cm 40.0kg-cm Moisture/vapour transmission rate ASTM E96, Procedure B, MVTR 0.021g/m3 0.045g/m3 0.045g/m3 0.021g/m3 0.021g/m3 0.021g/m3 0.020g/m3 <2g/ m²/24hrs 0.01g/m2/24h Corrosion resistant Unique surface coating UV resistant Tested for the equivalent of 30 years at 100% humidity & 100% UV Tested for 20 years Te c h n i c a l S p e c i f i c a t i o n s Fire Propagation BS476 Part 6 Class 0 Class 0 Class 0 Class 0 Class 0 Class 0 Class 0 N/Aw w w. t r a d i n g g r e e n l t d . c o m Surface Flame Spread BS476 Part 7 Class 1 Class 1 Class 1 Class 1 Class 1 Class 1 Class 1 N/A Temperature resistant -50°C to +127°C -50°C to +127°C -50°C to +127°C -50°C to +127°C -37°C to +127°C -37°C to +127°C -35°C to +127°C -35°C to +127°C -20°C to +80°C Cross-Laminated Valeron® Core YES NO YES YES YES NO YES YES NO Chemical resistant Approved concentrated disinfectants Methane transmission <0.005cm3/h/m2 Oxygen transmission Nil N/A Radon improvement factor 500-1 CBR 708N
  • 3. EcoFoil® Insulating Aluminum Composite Foil with Cross-Laminated Valéron® core designed for high cost-effectiveness insulates from radiant heat and cold flexible enough to seal soft insulation 10 years guarantee, life >20 years* EcoFoil® is manufactured in an ISO 9001 factory in the EcoFoil® acts as an excellent vapor barrier to seal new or UK, by high pressure bonding a multilayer of highly existing soft insulation. Ensuring insulation performance reflective aluminum foil with tough-tear resistant core, is not compromised by interstitial condensation, which especially designed to act as solar radiation, vapor and would otherwise reduce insulation performance and gas barrier in hot and humid climates. could cause damage to the overall construction. Application ex.: ceiling insulation EcoFoil® can be stapled on the upper side of ceiling panels. It will reflect 96% of heat coming through the roof. Cut the foil on site to the ceiling panel’s shape , staple it in place: the ceiling instantly becomes a heat shield, for up to 20 years (tested in UV accelerator). Application ex.: insulation encapsulation EcoFoil® is designed to encapsulate fiber insulation, to enhance the overall product properties. Inner layers can be heat sealed to themselves or to other materials. Can be incorporated into manufacturing processes. Application ex.: modular buildings EcoFoil® is an ideal insulation for prefabricated buildings, recycled containers and other modular buildings. Easy to install on site under the roof and inside wall panels, even under the floor, it will conserve energy in both hot and cold climates. * the foil is guaranteed not to delaminate or lose performance during 10 years when applied properly.Exclusively imported by Trading Green Ltd., Interchange 21 Building, 32nd Floor, 399 Sukhumvit Road, North Klongtoey, Wattana, Bangkok 10110 Thailand. Office: +66 (0) 2660 3601 Fax: +66 (0) 2660 3881 Email: info@tradinggreenltd.com Internet: www.tradinggreenltd.com
  • 4. EcoFoil® Insulating Aluminum Composite Foil with Cross-Laminated Valéron® core Recommended application: roof insulation EcoFoil® is a radiant barrier: it needs to be installed facing at least one air space, from 19mm to 25mm deep. The foil blocks solar heat striking a roof from conducting Eco-Foil® through the tiles and insulation layers. Without Eco-Foil ®, heat crosses any air spaces as unwanted infrared energy, warming the inner skin of the structure and overheating the room. Recommended application: wall insulation Eco-Foil® is a two sided single foil for use as a heat reflective lining within the fabric of sustainable homes, most prefabricated domestic and commercial building components including portable and modular structures. Eco-Foil® has an emissivity of only 0.05: 96% of radiant heat or cold is reflected back. Eco-Foil® The membrane eliminates excessive heat gain caused by incoming solar radiation yet can keep the room warm during cold weather. No matter the season, room temperatures are far easier to control The foil has been designed and tested to last for more than 20 years at 100% UV and 100% humidity exposure. Emissivity 0.05 Reflectivity 96% Roll Size 96m x 1.25m 120m² Nominal Thickness 91 microns ±10% Moisture/vapour Transmission Rate (ASTM E96, <2g/ m²/24hrs Procedure B, MVTR) UV resistant Tested for the equivalent of 20 years at 100% humidity and 100% UV Optical density 2.2 ± 0.2 Oxygen permeability <2cc / m2 / 24hrs Eco-Foil is ideal for insulating modular and pre-fabricated buildings. Sales contact: Trading Green Ltd. Phone: +66 (0) 2660 3601 Fax: +66 (0) 2660 3881 Email: info@tradinggreenltd.comExclusively imported by Trading Green Ltd., Interchange 21 Building, 32nd Floor, 399 Sukhumvit Road, North Klongtoey, Wattana, Bangkok 10110 Thailand. Office: +66 (0) 2660 3601 Fax: +66 (0) 2660 3881 Email: info@tradinggreenltd.com Internet: www.tradinggreenltd.com
  • 5. ThermoFoil®ES Insulating Aluminum Composite Foil with Cross-Laminated Valéron® corehigh-performance hot & cold insulationextreme tear resistancebased on NASA technology20 years guarantee, life >60 years Grand Mosque Abu Dhabi Raffles Hotel Singapore Mattel Factory Thailand Livestock houses USA Ministry of Foreign Affairs Sony Head Office Building Cold storage insulation UK Abu Dhabireflectivity 96.7% Beijing Olympics 2008 Roof insulation UKemissivity 0.046moisture transmission rate 0.021g/m2cuts building energy consumptionoffsets carbon emissions CARBON smart green OFFSET product
  • 6. ThermoFoil®ES Insulating Aluminum Composite Foil with Cross-Laminated Valéron® core Insulated metal sheet or cement fiber tile Recommended application: roofs in tropical countries ThermoFoil®ES Thermo-Foil®ES is a radiant barrier: it needs to be installed facing at least one air space, from 19mm to 25mm deep. Roof structure When used in conjunction with PE foam, PU foam, fiberglass or solar reflective roof coatings, Thermo-Foil®ES can improve the U- Value of that structure by up to 20% in tropical weather conditions. Recommended application: cold storage facilities Thermo-Foil®ES is ideal for insulating cold storage warehouses walls and roofs without adding thickness to the structure. It is recommended to place a layer of ThermoFoil®ES on either side of the soft insulation panels to reflect heat back outside and cold back inside. The foil is bug proof and will not attract mold or fungi. It is also an excellent moisture and dust particles barrier, making it ideal for structures where safety is a priority, such as pharmaceutical and food and beverage. Reflectivity (ASTM E903) 96.70% Emissivity (ASTM E408) 0.046 Carbon Emissions Saved 23kg on un-insulated wall, 12.33kg on insulated wall per sqm per annum Roll Size and Weight 96m x 1.25m 120m² 18 kg Nominal Thickness 145 microns Tear Resistant Machine Direction (MD) (ASTM D882) Tensile MD 6.620kN/m, Trouser tear MD 33.1N, Elongation at break MD 222.6% Tear Resistant Cross Direction (CD) (ASTM D882) Tensile CD 5.487kN/m, Trouser tear CD 33.9N, Elongation at break CD 210% Beach Puncture Resistance (ASTM D774) 40.1kg-cm Moisture/vapour Transmission Rate (ASTM E96, 0.021g/m² Procedure B, MVTR) Corrosion resistant. Unique surface coating UV resistant Tested for the equivalent of 30 years at 100% humidity and 100% UV BS476 Part 6 Fire Propagation Class 0 BS476 Part 7 Surface Flame Spread Class 1 Temperature Resistant -50°C to +127°C Cross Laminated Valéron® Core Yes: prevents aluminum and anti-tarnish layers from tearing Pressure Wash Resistant 207 bar at 300mm Chemical Resistant Tested with approved concentrated disinfectants.Exclusively imported by Trading Green Ltd., Interchange 21 Building, 32nd Floor, 399 Sukhumvit Road, North Klongtoey, Wattana, Bangkok 10110 Thailand. Office: +66 (0) 2660 3601 Fax: +66 (0) 2660 3881 Email: info@tradinggreenltd.com Internet: www.tradinggreenltd.com
  • 7. Eco-Brite® Insulating Aluminum Composite Foil with Cross-Laminated Valéron® coreroofing & wall insulationflexible, easy to install on sitebased on NASA technology20 years guarantee, life >60 years Grand Mosque Abu Dhabi Raffles Hotel Singapore Eco-Brite® being installed in modular buildings in the UK. Ministry of Foreign Affairs Sony Head Office Building Abu Dhabireflectivity 96.1% Beijing Olympics 2008 Roof insulation UKemissivity 0.048moisture transmission rate 0.045g/m2cuts building energy consumptionoffsets carbon emissions CARBON smart green OFFSET product
  • 8. Eco-Brite® Insulating Aluminum Composite Foil with Cross-Laminated Valéron® core Recommended application: roofs in tropical countries Eco-Brite® is a radiant barrier: it needs to be installed facing at least one air space, from 19mm to 25mm deep. Eco-Brite® The foil blocks solar heat striking a roof from conducting through the tiles and insulation layers. Without Eco-Brite ®, heat crosses any air spaces as unwanted infrared energy, warming the inner skin of the structure and overheating the room. Recommended application: modular homes & buildings Eco-Brite® is a two sided single foil for use as a heat reflective lining within the fabric of sustainable homes, most prefabricated domestic and commercial building components including portable and modular structures. Eco-Brite® has an emissivity of only 0.048: 96.1% of radiant heat or cold is reflected back. Eco-Brite® The membrane eliminates excessive heat gain caused by incoming solar radiation yet can keep the room warm during cold weather. No matter the season, room temperatures are far easier to control The foil has been designed and tested to last the lifetime of a house. Reflectivity (ASTM E903) 96.10% Emissivity (ASTM E408) 0.048 Carbon Emissions Saved 23kg on un-insulated wall, 12.33kg on insulated wall per m2 per annum Roll Size and Weight 96m x 1.25m 120m² / 18.72 kg Nominal Thickness 135 microns Tear Resistant Machine Direction (MD) (ASTM D882) Tensile MD 3.905kN/m, Trouser tear MD 10.2N, Elongation at break MD 232.8% Tear Resistant Cross Direction (CD) (ASTM D882) Tensile CD 4.096kN/m, Trouser tear CD 15.6N, Elongation at break CD 100.4% Beach Puncture Resistance (ASTM D774) 40.5kg-cm Moisture/vapour Transmission Rate (ASTM E96, 0.045g/m². Procedure B, MVTR) Corrosion resistant Unique surface coating UV resistant Tested for the equivalent of 30 years at 100% humidity and 100% UV BS476 Part 6 Fire Propagation Class 0 BS476 Part 7 Surface Flame Spread Class 1 Temperature Resistant -50°C to +127°CExclusively imported by Trading Green Ltd., Interchange 21 Building, 32nd Floor, 399 Sukhumvit Road, North Klongtoey, Wattana, Bangkok 10110 Thailand. Office: +66 (0) 2660 3601 Fax: +66 (0) 2660 3881 Email: info@tradinggreenltd.com Internet: www.tradinggreenltd.com
  • 9. Enca-Seal®Insulating Aluminum Composite Adhesive Membrane with Cross-Laminated Valéron® coreair-conditioning duct insulationadhesive side for easy installationbased on NASA technology20 years guarantee, life >60 years Grand Mosque Abu Dhabi Raffles Hotel Singapore Enca-Seal® wrapped around an air-conditioning vent. Ministry of Foreign Affairs Sony Head Office Building Abu Dhabireflectivity 96.1% Beijing Olympics 2008 Canadian embassy Abu Dhabiemissivity 0.048moisture transmission rate 0.021g/m2cuts building energy consumption Factory A/C ducts in UKoffsets carbon emissions CARBON smart green OFFSET product
  • 10. Enca-Seal® Insulating Aluminum Composite Adhesive Membrane with Cross-Laminated Valéron® core Multi-layered composite foil with high-performance adhesive Enca-Seal® ● Impermeable surface finish ● 12 micron bright aluminum ● Two part curing adhesive ● Valéron® 100 micron, cross-laminated installation example for hot ● High performance self adhesive and cold pipe insulation ● Paper release liner Enca-Seal® Recommended application: air-conditioning ducts • typical HVAC systems can double energy bills through inefficiencies • heat loss and gain can be reduced by 90% by insulating warm and cooled pipework or valves • in typical office setup, the HVAC system contributes to 50% of the total energy costs • over time infrared and ultraviolet energy breaks down the surface of most foam and installation example for air- rubber insulation, shortening its life and conditioning vent insulation properties (data source: Carbon Trust 2008). This is prevented by using Enca-Seal. Reflectivity (ASTM E903) 96.10% Emissivity (ASTM E408) 0.048 Roll Sizes and Weight 96m x 1.25m 120m² / 20 kg 33m x 1.25m – 41.25m² / 7.5kg Nominal Thickness 130 microns (or 150 microns for Enca-Seal® 150PE) Tear Resistant Machine Direction (MD) (ASTM D882) MD of 6.0kN/m Tear Resistant Cross Direction (CD) (ASTM D882) CN 5.0kN/m Beach Puncture Resistance (ASTM D774) Beach puncture of 40.1kg-cm Moisture/vapour Transmission Rate (ASTM E96, 0.021g/m² Procedure B, MVTR) Corrosion resistance Unique surface coating UV resistance Testing for the equivalent of 30 years at 100% humidity & 100% UV BS476 Part 6 Fire Propagation Class 0 BS476 Part 7 Surface Flame Spread Class 1 Temperature Resistance -37C to +127°CExclusively imported by Trading Green Ltd., Interchange 21 Building, 32nd Floor, 399 Sukhumvit Road, North Klongtoey, Wattana, Bangkok 10110 Thailand. Office: +66 (0) 2660 3601 Fax: +66 (0) 2660 3881 Email: info@tradinggreenltd.com Internet: www.tradinggreenltd.com
  • 11. Enca-Clad ™ Insulating Aluminum Composite Adhesive Cladding with Cross-Laminated Valéron® corepiping & duct outdoors claddingadhesive side for easy installationbased on NASA technology20 years guarantee, life >60 years Grand Mosque Abu Dhabi Raffles Hotel Singapore Enca-Clad™ : external ducting in UAE. Ministry of Foreign Affairs Sony Head Office Building Abu Dhabireflectivity 96.1% Beijing Olympics 2008 Canadian embassy Abu Dhabiemissivity 0.048moisture transmission rate 0.020g/m2cuts building energy consumption Pre-insulated pipesoffsets carbon emissions CARBON smart green OFFSET product
  • 12. Enca-Clad Insulating Aluminum Composite Adhesive Cladding with Cross-Laminated Valéron® core ™ Multi-layered composite foil with high-performance adhesive Enca-Clad® ● Impermeable surface finish ● 25 micron bright aluminum ● Two part curing adhesive ● Valéron® 300 micron core, cross-laminated installation example for hot ● High performance self adhesive and cold pipe insulation ● Paper release liner Enca-Clad® Recommended application: external ducting • Enca-Clad™ is a durable 345 micron membrane designed to completely encase external insulated or un-insulated structures, pipelines and ducts • can also be used to clad flat surfaces and large storage tanks • other uses include transport, marine and OEM applications • aluminum surface of Enca-Clad™ has a special UV resistant coating : bright surface never installation example for air- tarnishes conditioning vent insulation • 100% waterproof, mold and bacteria proof: suitable for food preparation areas Reflectivity (ASTM E903) 96.10% Emissivity (ASTM E408) 0.048 Roll Size and Weight 1.25m x 26.4m / 33m² Nominal Thickness 345 microns Tear Resistant Machine Direction (MD) (ASTM D882) Tensile MD 5.900kN/m Tear Resistant Cross Direction (CD) (ASTM D882) Tensile CD 4.900kN/m Beach Puncture Resistance (ASTM D774) 40.0kg-cm Moisture/vapour Transmission Rate (ASTM E96, Procedure 0.020g/m² B, MVTR) Corrosion resistance Unique surface coating UV resistance Tested for the equivalent of 30 years at 100% humidity & 100% UV Temperature Resistance -35°C to +127°CExclusively imported by Trading Green Ltd., Interchange 21 Building, 32nd Floor, 399 Sukhumvit Road, North Klongtoey, Wattana, Bangkok 10110 Thailand. Office: +66 (0) 2660 3601 Fax: +66 (0) 2660 3881 Email: info@tradinggreenltd.com Internet: www.tradinggreenltd.com
  • 13. Insuflect Insulating Aluminum Composite Membrane with Cross-Laminated Valéron® core ™foam panel insulationkraft paper side for foam adherencebased on NASA technology20 years guarantee, life >60 years Cold storage sandwich panels Raffles Hotel Singapore Insuflect™ insulates pharmaceutical goods in Pfizer Modular structures Canadian embassy Abu Dhabi warehouses in the United Kingdom.reflectivity 96.7% Frozen food warehouse, USAemissivity 0.046 Cabin officesmoisture transmission rate 0.021g/m2reduces energy consumptionoffsets carbon emissions CARBON smart green OFFSET product
  • 14. Insuflect Insulating Aluminum Composite Membrane with Cross-Laminated Valéron® core ™ High insulating performance, for life A perfect Vapor Control Layer Reasons for choosing Insuflect™ Insuflect™ is an aluminum composite Insuflect reflects 96.7% of radiant Insuflect™ can reflect heat radiating membrane with a kraft paper side heat / cold back, and provides a 100% through walls and roofs from solar designed to insulate foam panels, for waterproof membrane with a very radiation, keeping buildings cool in the life of a building. low 0.021g/m moisture transmission warm weather. rate. It offers a perfect protection to The 12.5 micron aluminum foil is When used in conjunction with foam the foam insulation against humidity. coated with a proprietary film that is panels to insulate cold storage guaranteed to stay bright and never Reduce Carbon Emissions with warehouses, wall, ceiling and door to tarnish for more than 60 years. Insuflect™ panels, Insuflect™ keeps heat out and also prevents air-conditioned cold air This foil is bonded to a 100 micron Insuflect™ has been independently from escaping, reducing energy costs. cross-laminated extra-tough Valeron® tested to save 12.33kg of CO2 core, then bonded to an 80 gram emissions per square meter (sqm) per The combined benefit of keeping heat stout kraft paper. The paper acts as an year. On un-insulated solid and cavity out and conserving cold can lead to interface allowing foam insulation to walls, savings can total 18.2kg of CO2 substantial savings on air-conditioning adhere to the foil. per sqm. When used on both sides of consumption. a foam board, these figures are Insuflect™ is ready-to-use in industrial doubled! bonding processes to foam boards. Multi-layered composite foil for foam panel insulation foam insulation ● Impermeable surface finish ● 12.5 micron bright 98% pure aluminum ● Two part curing adhesive ● 100 micron Valeron® polypropylene core Above: wall installation example of Insuflect™ bonded to each ● 80gr Kraft paper interface for foam adherence side of a white foam board, in a hot climate country. Reflectivity (ASTM E903) 96.70% Emissivity (ASTM E408) 0.048 Roll Sizes and Weight 96m x 1.25m 120m² / 20 kg Nominal Thickness 230 microns Tear Resistant Machine Direction (MD) (ASTM D882) Tensile MD of 6.0kN/m Tear Resistant Cross Direction (CD) (ASTM D882) CD 5.0kN/m Beach Puncture Resistance (ASTM D774) Beach puncture of 40.0kg-cm Moisture/vapour Transmission Rate (ASTM E96, 0.021g/m² Procedure B, MVTR) Corrosion resistance Unique surface coating UV resistance Testing for the equivalent of 30 years at 100% humidity & 100% UV BS476 Part 6 Fire Propagation Class 0 BS476 Part 7 Surface Flame Spread Class 1 Temperature Resistance -37C to +127°CExclusively imported by Trading Green Ltd., Interchange 21 Building, 32nd Floor, 399 Sukhumvit Road, North Klongtoey, Wattana, Bangkok 10110 Thailand. Office: +66 (0) 2660 3601 Fax: +66 (0) 2660 3881 Email: info@tradinggreenltd.com Internet: www.tradinggreenltd.com
  • 15. Terrethene ™Insulating & Waterproofing Aluminum Composite foil with Cross-Laminated Valéron® core Sub-surface insulation Waterproof & Gas-proof Lifespan >60 years Grand Mosque Abu Dhabi Ministry of Foreign Affairs Abu Dhabi Terrethene™ at Royal Botanical Gardens, Oman. Beijing Olympics 2008 Sony head office. 100% waterproof barrier below buildings low methane/gas permeability <0.005cm²/hm²/atm low moisture/vapour transmission rate 0.01g/m² in 24h Radon improvement factor 500:1 temperature resistance from -20°C to +80°C CARBON smart green OFFSET product
  • 16. Terrethene Insulating & Waterproofing Aluminum Composite foil with Cross-Laminated Valéron® core ™ Benefits of fitting Terrethene™ under a building:  100% water-proof barrier under buildings  Radon gas barrier under buildings  Liner for commercial fish farm ponds  Gas barrier for landfill sites to prevent the migration of methane and carbon dioxide gases  Liner for SUDS (Sustainable Urban Drainage System) trenches  Water trap layer under golf greens and sports pitches to prevent water seepage into the sub-soil  Water-proof stratum for roof gardens  Liner for reed beds  Meets BS Standards for DPC, NHBC Approved Terrethene™ has been developed for sub-surface applications. It is a multi-layered membrane made from polyethylene, aluminum foil and high tensile woven substrates that block the migration of vapour, moisture, water and various environmentally harmful gasses. These laminated films combine to form a membrane that protects against Methane (CH4), Carbon Dioxide (CO2) and Radon gases. An additional benefit is the partial plastic memory, which allows the membrane to be used in three dimensional detailing of building structures where conventional gas membranes will not profile. Trigger levels from which a gas barrier is needed are as follows: Methane 1 % by volume in air (5% being the lowest explosive level – L.E.L), Carbon dioxide 1.5% by volume in air and radon in designated areas where the Becquerel’s level is above 200. Direct comparison between Terrethene™ and HDPE Sheeting shows Therrethene has 100,000 times the barrier performance of 250 micron HDPE. Material Terrethene™ HDPE HDPE Thickness 460 micron 250 micron 500 micron Methane and Natural Gas Transmission 0.005cc/m2/day 500cc/m2/day* 25cc/m2/day* *Data obtained from British Gas Summary of ASTM and BS certifications Roll Size 1.195 x 50 m 24.8kg Thickness 460 micron +/- 10 micron Moisture/Vapour Transmission Rate 0.01 g/m2 / 24 hours Tensile Strength 9.45 kN/m Methane Transmission Less than 0.005cm3/h/m2 Oxygen Transmission Nil Radon Improvement Factor 500 -1 CBR 708N Water Barrier 100% Temperature Resistant -20oC to + 80oC Terreseal™ Gas Barrier Tape 70mm wide x 24m roll Terreflex™ Adhesive Membrane 1.050m wide x 28.6m rollExclusively imported by Trading Green Ltd., Interchange 21 Building, 32nd Floor, 399 Sukhumvit Road, North Klongtoey, Wattana, Bangkok 10110 Thailand. Office: +66 (0) 2660 3601 Fax: +66 (0) 2660 3881 Email: info@tradinggreenltd.com Internet: www.tradinggreenltd.com
  • 17. Adhesive Tapes Insulating Adhesive Aluminum Composite Tapes high performance adhesive aluminum tapes insulate from radiant heat and cold 20 years guarantee, life >60 years designed for use in buildings UK-based aluminum composite foil manufacturer Apollo Insulation Ltd. has developed two high-performance, heat- reflective adhesive tapes for the building sector: ThermoFoil Tape and EncaSeal Tape. Both have been designed to last more than 20 years. One side of Apollo Insulation Tapes is coated with a specially developed waterproof acrylic adhesive with a release liner. Once in position, the adhesive is formulated to migrate into the tarnish-proof coating, where it sets quickly and provides a life-long, watertight bond. ThermoFoil Tape: general use adhesive tape ThermoFoil Tape is designed as a seal, to join adjacent sheets of ThermoFoil ES, EcoBrite, EcoFoil, Insuflect and other aluminum foils. It is also recommended for sealing around stud-work, doors and window frames. The tape will prevent air infiltration and insure buildings meet mandatory air pressure tests. The special curing adhesive will bond strongly with any substrate for the tape’s entire lifespan. Recommended use: standard foil installation in domestic and commercial buildings, in floors, ceilings, roofs and walls. EncaSeal Tape: UV-resistant, fire resistant adhesive tape EncaSeal Tape’s aluminum surface is coated with a patented coating that ensures its UV resistance for life: its bright side never tarnishes. EncaSeal Tape is 100% water-proof, bug-proof and achieved a Class 0 BSA476 fire rating, the best score attainable. EncaSeal Tape has a strong, high density polyethylene (HDPE) substrate core which ensures a long life and keeps wastage to a minimum during installation. EncaSeal Tape can be used independently or in conjunction with Apollo Insulation EncaSeal aluminum composite foil. It can be installed onto ducting carrying hot air at 130˚C without delaminating or coming away from the insulation. It has been tested with approved concentrated disinfectants and can be pressure-washed up to 207 bar at 300mm. Recommended use: air-conditioning ducts, pipework, storage tanks.Exclusively imported by Trading Green Ltd., Interchange 21 Building, 32nd Floor, 399 Sukhumvit Road, North Klongtoey, Wattana, Bangkok 10110 Thailand. Office: +66 (0) 2660 3601 Fax: +66 (0) 2660 3881 Email: info@tradinggreenltd.com Internet: www.tradinggreenltd.com
  • 18. Adhesive Tapes Insulating Adhesive Aluminum Composite Tapes Properties ThermoFoil Tape EncaSeal Tape Nominal Size per roll 100m x 50mm 100m x 50mm Nominal Weight per roll 5m2 – 700g 5m2 – 950g Thickness without release liner 45 micron 150 micron Reflectivity 96.1% 96.1% Emissivity 0.048 0.048 Fire Resistance Not tested BSA476 parts 6 and 7 Peel Adhesion – PSTC-1 11.4 N/25mm 11.4 N/25mm Shear Adhesion – PSTC-7 Indefinite at 15.2 k/Pa Indefinite at 15.2 k/Pa Tensile Strength PSTC-31 99.4 N/25mm 99.4 N/25mm Elongation 150% 150% Maximum Temperature +127˚C +127˚C Minimum Temperature -37˚C -37˚C Release Liner 75g 75g Tear Resistance Tensile MD 3.905kN/m Tensile MD 6.620kN/m Puncture Resistance 40.5kg-cm 41.1kg-cm Moisture/Vapour 0.045 g/m2 0.021 g/m2 Transmission Rate Sales contact: Trading Green Ltd. Phone: +66 (0) 2660 3601 Fax: +66 (0) 2660 3881 Email: info@tradinggreenltd.comExclusively imported by Trading Green Ltd., Interchange 21 Building, 32nd Floor, 399 Sukhumvit Road, North Klongtoey, Wattana, Bangkok 10110 Thailand. Office: +66 (0) 2660 3601 Fax: +66 (0) 2660 3881 Email: info@tradinggreenltd.com Internet: www.tradinggreenltd.com