NSN_MASAN

1,502 views

Published on

INFORMATION PURPOSE ONLY

0 Comments
0 Likes
Statistics
Notes
  • Be the first to comment

  • Be the first to like this

No Downloads
Views
Total views
1,502
On SlideShare
0
From Embeds
0
Number of Embeds
6
Actions
Shares
0
Downloads
31
Comments
0
Likes
0
Embeds 0
No embeds

No notes for slide

NSN_MASAN

  1. 1. SURPASS hiX 56** IP-DSLAM SURPASS hiX 5625/5630/5635 Multiservice IP DSLAMs — R 2.0 M SURPASS Carrier Ethernet Comprehensive 1
  2. 2. End-to-end Solutions The Siemens SURPASS hiX 5625 / 5630 /5635 is an innovative platform for Access Networks to provide Broadband services on the last mile of the network. It is an Ethernet based platform. Carrier Grade redundancy for Power, Fan, Central Card and Uplink as well as End to End Management make DSLAMs failure proof. The access to the customer is provided over the existing copper without additional investment in the infrastructure. Its high-speed interfaces are suitable for asymmetrical and symmetrical applications such as super-fast Internet access, teleworking/ telelearning, video conferencing, virtual private networking and streaming multimedia content and videos. It provides all flavors of broadband Interfaces like ADSL2+, VDSL2 (next release) and SHDSL / SHDSL.bis in addition to VoIP line cards. Siemens SURPASS hiX 5625 / 5630 / 5635 IP DSLAM family also allows secure high-speed applications for business customers like LAN — to-LAN or Voice services over broadband. DSLAM Specifications General System Architecture • Mass rollout platform with universal slot architecture for Control Cards (CC) and Interface Units (IU) • Chassis design for 19” / ETSI rack mounting • Front access including Control and Switch Fabric • CO & Outdoor Cabinet installation for M400/M600 • Three chassis variants available: M400 for hiX 5625 2
  3. 3. • 7 Slots (1 CXU + 5 IU + CIUG) / horizontal layout M600 for hiX 5630 • 11 Slots (1 or 2 CXU + 8 IU + CIUG) / horizontal layout M1200 for hiX 5635 • 17 Slots (1 CXU + 16 IU or 2 CXU + 15 IU) / vertical layout • Central Office (CO) installation for M1200 • 1 Gbps slot capacity • Non Blocking Architecture (24 / 48 Gbps switching California Counting) • GE Star from Central Card to each Interface Unit slot • Separate shelf for splitters • Subtending interfaces option • DC Powering • External AC Power supply • Redundant DC Power supply (- 48 V) • Fan Redundancy • Redundancy for Switch/Control Card • Link Redundancy (hardware and software based redundancy mechanisms) New M1100 shelf for hiX 5635 M1100 shelf is a better design meeting customer requirements more closely and will replace the M1200 shelf. It is a variant for the M1200 shelf with the only difference of one less slot than M1200. The reduction of one slot offers advantages like easy access for external interfaces reducing 3
  4. 4. installation time and effort resulting in OPEX reduction. All other features and interfaces remain the same as compared with M1200 shelf except the use of new CXU-B1. Remark on Multi service Support • R 2.0 M is the hiX 56xx software with multi service support (the mix of xDSL and VoIP cards within one chassis). Uplink Interfaces • 1 or 2 x CXUs possible (second card for 1+1 redundancy, standby architecture) • CXU has 8 GE interfaces, 4 of which can be used simultaneously • GE interface types available: o Electrical — 100/1000 Base-T autosensing o Optical — SFP / (LX) single mode / (SX) multi mode • Per port assignment of Uplink interface e.g. Network Interface (Uplink) or User Interface (Cascading). • Uplink protection with use of Link Aggregation (LAG), LACP Subscriber Line Interfaces • Service modes: ADSL, ADSL2, ADSL2+, SHDSL and VoIP (POTS) • Number of slots dedicated for IU per chassis: o 5 slots in M400 chassis o 8 slots in M600 chassis 4
  5. 5. o 15 or 16 slots in M1200 chassis (depending on Central Card redundancy mode) o 14 or 15 slots in M1100 chassis (depending on Central Card redundancy mode) • Maximal number of ADSL2+ or VoIP subscribers per subrack with 72 ADSL2+ or VoIP ports per Interface Unit: o Up to 360 for hiX 5625 / M400 Chassis o Up to 576 for hiX 5630 / M600 Chassis o Up to 1080 for hiX 5635 / M1100 Chassis o Up to 1152 for hiX 5635 / M1200 Chassis • Support of POTS and ISDN services o hiX 56xx via splitter — base band voice o hiX 56xx via CPG (VoIP over DSL) o hiX 56xx VoIP POTS H.248 controlled via Linecard Key Features • 16k MAC addresses per DSLAM • MAC address limitation per port • MAC Anti spoofing • 4096 VLANs • VLAN assignment per PVC/ Port / IP SA/DA • VLAN Translation • VLAN Stacking (QinQ, user frames w/o tag) • Port isolation 5
  6. 6. • Standard Ethernet Bridging • Link Aggregation (LAG), LACP • Spanning Tree: STP, RSTP, MSTP • Support of Static IP addresses • Flow Control according to 802.3x • Ethernet Ring Protection • 8 Queues per Port (INFINEON card only) • SP (strict priority for Downstream), WFQ (WRR-like) • CoS/QoS acc. to ATM PVC or Port • QoS acc. to 802.1p, VLAN, IP SA/DA, IP TOS/DSCP, L4 protocol) • 802.1p mapping DS/US (multiple PVC with single MAC address • Multiple ATM PVCs per Line (up to 8) • Per port traffic Policing & Shaping • DHCP Relay Agent (opt. 82) per PVC • DHCP Filtering • 256 Multicast Groups • IGMP Snooping and Proxy for IP Multicast • IGMP v1/v2, Filtering • PPPoE Intermediate Agent • RFC 2684 bridged (VC/LLC encapsulation) • IPoATM / RFC 2684 routed/dynamic • OAM (F5 loopback, VC RDI) 6
  7. 7. • Remote upgradeability from older software versions POTS supplementary services • Call Forwarding Unconditional • Call Forwarding Busy • Call Forwarding No Reply • Calling Line Identification Presentation • Calling Line Identification presentation Restriction • Call Completion to Busy Subscriber • Malicious Call Identification POTS supplementary services supported transparently • Outgoing Call Barring • Carrier Selection • Carrier Pre-Selection • Inhibition of Incoming Forwarded Call Uplink Interfaces — Central Card 100/ 1000Base-T Line Interface electrical • IEEE 802.3u / 802.3z compliant • 100/ 1000BASE-T single RJ-45 connector • Supports auto-negotiation 7
  8. 8. • Transmission distance: 100m • Cable: UTP cat.5e (8 poles: four bi-directional pairs) 1000Base-SX Line Interface optical • 1000BASE-SX compliant with IEEE 802.3z • full-duplex operation for Multimode Fiber • transmission distance: 550m with 50um fiber (2km type and 15km type available too) • path attenuation: 7.5dB 10 • output power range: — 9.5 ÷ — 4 dBm (average) • input sensitivity: min. — 17dBm (typ. — 20dBm) • connector type: LC 1000Base-LX Line Interface optical • 1000BASE-LX compliant with IEEE 802.3z • full-duplex operation for Single Mode Fiber • transmission distance: about 10km (20km type and 40km type available too) • path attenuation: 10.5 dB • output power range: — 9.5 ÷ — 3 dBm (average) • input sensitivity: min. — 20dBm • cable type: 9/125µm single mode • transmitter wavelength: 1266 ÷ 1360nm 8
  9. 9. • laser type: laser diode class 1 • connector type: LC 1000Base-ZX Line Interface optical • 1000 BASE-ZX • full-duplex operation for Single Mode Fiber • transmission distance: about 80km • path attenuation: 23 dB • output power range: 0…5 dBm • input sensitivity: — 3….-23dBm • cable type: 9/10µm single mode • transmitter wavelength: 1550nm • laser type: laser diode class 1 • connector type: LC Line Interfaces — Interface Unit Card ADSL2+ — 72 port • ADSL functionality (DMT) according ITU-T G.992.1 • ADSL2 (G.dmt.bis) functionality (DMT) according ITU-T G.992.3 • ADSL2+ functionality (DMT) according ITU-T G.992.5 9
  10. 10. • ANNEX A,L supported (B planned) — Connexant 72-ports IU • ANNEX A, B supported (L, M, I, J planned) — Infineon 72-ports IU SHDSL — 48 Port • SHDSL (TC PAM16) according ITU-T G.991.2 • HW prepared for SHDSL.bis, 4-wire, Bonding, Wetting Current VoIP (POTS) — 72 Port • CODEC: G.711, G.723.1, G.729A & B, G.726 • Protocol — H.248 • G.168 Echo Cancellation • Jitter Buffer IP Multicast • RFC1112 IGMP V1 • RFC 2236 IGMPV2 • IGMP Snooping and Proxy • RFC 826 ARP Security • MAC, IP, and L4 • Access Control Lists 10
  11. 11. • DOS Prevention • Flow Control • IGMP, DHCP filtering Configuration & Management • Remote network traffic monitoring with standard SNMP and RMON protocols • CLI-based shell provides common user interface through console port or telnet. • Remote network monitoring & configuration using GUI-based APM-E network management solution. • User Access Control • Secure Shell v1/v2 • Denial of Service attack prevention • Port Mirroring for the purposes of: sniffing, traffic monitoring, port-based traffic detection • Fault and Performance Management Standards • IEEE 802.1ad • IEEE 802.1D STP (Spanning Tree Protocol) • IEEE 802.1p QoS • IEEE 802.1Q VLAN • IEEE 802.1w RSTP (Rapid Spanning Tree Protocol) 11
  12. 12. • IEEE 802.3 • IEEE 802.3ad Link Aggregation • IEEE 802.3u Fast Ethernet • IEEE 802.3x Flow Control • IEEE 802.3z Gigabit • MEF Service model (planned) Environmental and Safety Standards M1200/1100 Chassis / CO & Cabinet installation: • ETSI EN 300 019-1-3, class 3.3 M600/M400 Chassis / CO & Cabinet installation: • ETSI EN 300 019-1-3, class 3.3 Environmental standard compliance: • Mechanics acc. ETS 300 119-1/2/3/4 • Power supply interface acc. ETS 300 132-2 • ETSI EN 300 386 for EMC and CE label • ETSI ES 201 468 v1.2.1 • EN 60950-1: 2001 for product safety • ETS 300 753 • IEC 825 for radiation safety of laser products • ITU-T K.20 enhanced level 12
  13. 13. • ITU-T K.21 enhanced level for indoor • ITU-T K.27 • ITU-T K.31 for indoor • ITU-T K.35 for outdoor • ITU-T K.45 enhanced level for outdoor • 89/336/EECEMC Directive • CISPR22: 1997 Class A • CISPR22: 1997 Class B • EN55022: 1998 Class A • EN55022: 1998 Class B • EN55024: 1998 includes EN61000-4-3,4,5,6,8,11 • EN610000-3-2,3 Physical Data hiX 5625 / 5630 / hiX 5635 hiX 5635 / Chassis M1200 — 17 Slot Design 13
  14. 14. Vertical layout Dimensions w/o cables and brackets 571 mm x 449 mm x 279 mm (h x w x d) Dimensions incl. Cables and brackets 571 mm x 483 mm x 331 mm (h x w x d) Power supply • 2 redundant DC connectors for -48 V DC / — 60 V DC Working between 40,5 …72,0 V Power-consumption Fully equipped (1152 ADSL2+ lines): max. 1760 W Actual power consumption will depend on the no. of simultaneous connections and power modes in which these lines are running (normal/L2/L3) 14
  15. 15. Temperature range • According to ETSI EN 300 019-1-3, class 3.3 (-25 to +55 °C) • For outdoor installation a typical sun radiation add-on of +15 °C must be considered, resulting in an upper temperature limit of +70 °C hiX 5635 / Chassis M1100 — 16 Slot Design Vertical layout Dimensions w/o cables 571 mm x 444.5 mm x 279 mm (h x w x d) Dimensions incl. cables 571 mm x 483 mm x 331 mm (h x w x d) 15
  16. 16. Power supply • 2 redundant DC connectors for -48 V DC / — 60 V DC Working between 40,5 …72,0 V Power-consumption Fully equipped (1080 ADSL2+ lines): max. 1650 W Actual power consumption will depend on the no. of simultaneous connections and power modes in which these lines are running (normal/L2/L3 Temperature range • According to ETSI EN 300 019-1-3, class 3.3 (-25 to +55 °C) • For outdoor installation a typical sun radiation Add-on of +15 °C must be considered, resulting in an upper temperature limit of +70 °C hiX 5630 / Chassis M600 — 10 Slot Design 16
  17. 17. horizontal layout Dimensions w/o brackets and cables • 311 mm (7U) x 449 mm x 279 mm (h x w x d) Dimensions incl. brackets and cables • 311 mm (7U) x 483 mm x 331 mm (h x w x d) Power supply • 2 redundant DC connectors for -48 V DC / — 60 V DC • Working between 40,5 …72,0 V Power-consumption • Fully equipped (576 ADSL2+ lines):max. 952 W Temperature range • According to ETSI EN 300 019-1-3, class 3.3 (-25 to +55 °C) • For outdoor installation a typical sun radiation add-on of +15 °C must be considered, resulting in an upper temperature limit of +70 °C hiX 5625 M400 — 6 Slot Design 17
  18. 18. Horizontal layout Dimensions w/o brackets and cables • 222 mm (7U) x 449 mm x 279 mm (h x w x d) Dimensions incl. brackets and cables • 222 mm (7U) x 483 mm x 331 mm (h x w x d) Power supply • 2 redundant DC connectors for -48 V DC / — 60 V DC • Working between 40,5 …72,0 V Power-consumption 18
  19. 19. • Fully equipped (360 ADSL2+ lines): max. 600 W Temperature range • According to ETSI EN 300 019-1-3, class 3.3 (-25 to +55 °C) • For outdoor installation a typical sun radiation add-on of +15 °C must be considered, resulting in an upper temperature limit of +70 °C Splitter chassis — 8 slots Horizontal layout Dimensions • 222 mm (5U) x 483 mm x 261 mm (h x w x d) Splitter boards • 24-port splitter boards (48-ports IU) 36-port splitter boards (72-ports IU) Splitter chassis — 17 slots Vertical layout 16 slots for 24 or 36 port splitter and 1 slot with blank panel 19
  20. 20. Dimensions • 440 mm x 483 mm x 261 mm (h x w x d) Splitter boards • 24-port splitter boards (48-ports IU) 36-port splitter boards (72-ports IU) Power consumption values Power consumption detailed Power consumption per module (W) CXU — 24 Gbps 45 CXU — 12 Gbps 36 Common Interface Unit (CIU) 7 FAN Module — hiX 5635 78 FAN Module — hiX 5630 28,8 M1200 Chassis — hiX 5635 5 M600 Chassis — hiX 5630 0 ADSL2+ Interface Unit — 48-Port Annex A 79 ADSL2+ Interface Unit — 72-Port Annex A 110 SHDSL Interface Unit — 48-Port 85 VoIP (POTS) Interface Unit — 72-Port 85 Weight values per module (kg) CXU — 24 Gbps for hiX 5630 / 5635 1,1 CXU — 12 Gbps for hiX 5630 only 0,9 20
  21. 21. Common Interface Unit (CIU) for hiX5630 0,8 FAN Module — hiX 5635 3,1 FAN Module — hiX 5630 1,1 M1200 Chassis — hiX 5635 6,6 M600 Chassis — hiX 5630 4,6 ADSL2+ Interface Unit — 48-Port Annex A 0,9 ADSL2+ Interface Unit — 72-Port Annex A 1,2 SHDSL Interface Unit — 48-Port 0,9 Blank panel for hiX5630/hiX5635 0,1 Total Weight for hiX 5630 fully equipped 1 CXU + 8 IU / no redundant CXU Total Weight for hiX 5635 fully equipped 1 CXU + 16 IU / no redundant CXU 21

×