<ul><li>CENTRIFUGAL  OIL CLEANER  </li></ul><ul><li>FOR  Furnace Oil Cleaning </li></ul>Oilmax
Rotor Cleaning  Tray Y-Strainer Integral Motor Pump Pressure gauge Hour Meter Motor On Indicator Pressure Regulation Valve
OCS 600X2 Installation at Bharat Forge, Pune
6 Kg. Sludge Collected in Centrifuge Rotor  in 24 Hrs. Running
<ul><li>Why Furnace Oil Cleaning </li></ul><ul><li>Is Required </li></ul><ul><li>Furnace Oil Contains  Sludge  &  Impuriti...
Centrifuge Working Principle <ul><li>Centrifugal Oil Cleaner Operates on the Reaction Turbine Principle.  </li></ul><ul><l...
Schematic Diagram   Centrifugal Oil Cleaning System For Furnace oil Cleaning Centrifuge By-Pass Valve Pressure Gauge Furna...
<ul><li>Centrifuge is a multi-pass filtration system, it can Remove all the particles upto 1 micron from furnace Oil, in a...
Oilmax Centrifuge Credentials <ul><li>Tried, Tested and Proven with Installation  base of over  50,000 units in various ap...
Upcoming SlideShare
Loading in...5
×

Presentation furnace oil

533

Published on

Oilmax is a leading manufacturer of Centrifugal Oil Cleaners for Industrial Oil Cleaning applications like Wire Drawing, Quenching, Fastener Manufacturing, Bright Bar Manufacturing etc. We also retrofit Centrifuges on Marine Engines, Construction/Mining Equipments, Trucks and Buses.
Oilmax will help you to "Use your OILMAXimum". Thereby helping you to save on Oil Expenses and also protecting environment.

Published in: Automotive, Business, Technology
0 Comments
0 Likes
Statistics
Notes
  • Be the first to comment

  • Be the first to like this

No Downloads
Views
Total Views
533
On Slideshare
0
From Embeds
0
Number of Embeds
0
Actions
Shares
0
Downloads
15
Comments
0
Likes
0
Embeds 0
No embeds

No notes for slide
  • autowin
  • autowin
  • autowin
  • Transcript of "Presentation furnace oil"

    1. 1. <ul><li>CENTRIFUGAL OIL CLEANER </li></ul><ul><li>FOR Furnace Oil Cleaning </li></ul>Oilmax
    2. 2. Rotor Cleaning Tray Y-Strainer Integral Motor Pump Pressure gauge Hour Meter Motor On Indicator Pressure Regulation Valve
    3. 3. OCS 600X2 Installation at Bharat Forge, Pune
    4. 4. 6 Kg. Sludge Collected in Centrifuge Rotor in 24 Hrs. Running
    5. 5. <ul><li>Why Furnace Oil Cleaning </li></ul><ul><li>Is Required </li></ul><ul><li>Furnace Oil Contains Sludge & Impurities Which Causes Following Problem - </li></ul><ul><li>Impurities Cause Deposition in nozzles & Burners </li></ul><ul><li>Frequent Cleaning of Burners is required. </li></ul><ul><li>With Chocked Burners The Spray pattern Gets Distorted </li></ul><ul><li>This Results into inefficiency in Heat-Generation </li></ul><ul><li>Furnace Oil-Consumption increases </li></ul><ul><li>Burning of impurities causes Excess smoke. </li></ul><ul><li>This Results into Environmental and pollution issues. </li></ul>
    6. 6. Centrifuge Working Principle <ul><li>Centrifugal Oil Cleaner Operates on the Reaction Turbine Principle. </li></ul><ul><li>Oil Enters the centrifuge Under Pressure and flows to the rotor thru hollow shaft. </li></ul><ul><li>The Oil Pressure and flow is converted in rotational energy as the oil escapes through the jets, producing speed upto 6000 RPM. </li></ul><ul><li>The Resultant Centrifugal Force Removes dirt from the Oil depositing it on the Inner wall of rotor in a dense cake form. </li></ul><ul><li>Clean Oil Drains Back By Gravity to the oil Tank </li></ul>
    7. 7. Schematic Diagram Centrifugal Oil Cleaning System For Furnace oil Cleaning Centrifuge By-Pass Valve Pressure Gauge Furnace oil Supply to Burner Hour Meter MOTOR Furnace Oil Tank
    8. 8. <ul><li>Centrifuge is a multi-pass filtration system, it can Remove all the particles upto 1 micron from furnace Oil, in approx. 5-10passes. </li></ul><ul><li>For Furnace-Oil Tank Capacity 4000-6000 Ltr. Centrifuge Model OCS 600 is Recommended Which has flow rate of 4000 Ltr./hr. – This Means there will be approx one pass per Hr. and in 10 Hrs. there will be 10 passes, which is sufficient for efficient cleaning. </li></ul>
    9. 9. Oilmax Centrifuge Credentials <ul><li>Tried, Tested and Proven with Installation base of over 50,000 units in various applications including – DG Sets, Marine Engines, Construction / Earthmoving Equipments, Trucks and Buses , Industrial Process , Furnace Oil etc., </li></ul><ul><li>100 % OE Fitment on BEML Komatsu Greeves MWM, Tatra and Kirloskar </li></ul><ul><li>& Tatra Engines </li></ul><ul><li>Manufactured since 20 years, With Complete in-house facilities within group Companies including Die-Cast Foundry, CNC Turning Center and Vertical machining center, 140 ton Hydraulic press, etc., </li></ul><ul><li>Exported all over the world- including USA, UK, Canada, Japan, Netherland, China, Malaysia, Philippines, Indonesia etc., </li></ul><ul><li>Scope of Supply includes complete installation kit with Flanges, Gaskets, Fasteners, Hoses, Pressure Gauge, Hour Meter, Control Panel with Auto-shut off facility, (To automatically shut-off the unit after required no. of hours.) </li></ul>

    ×