Presentation  earthmoving equipment
Upcoming SlideShare
Loading in...5
×
 

Like this? Share it with your network

Share

Presentation earthmoving equipment

on

  • 938 views

Centrifugal Oil Cleaner removes very fine dirt from oil upto 1u and below, by centrifugal force created in centrifuge rotor. Conventional filters cannot remove such fine dirt form oil. There are no ...

Centrifugal Oil Cleaner removes very fine dirt from oil upto 1u and below, by centrifugal force created in centrifuge rotor. Conventional filters cannot remove such fine dirt form oil. There are no consumables hence no recurring cost. Collected dirt can be easily cleaned and the unit put back to use again. With clean oil, wear of tools and dies is reduced and job finished is improved. The oil need not be replaced frequently, thereby saving substantially on oil expenses and protecting environment

Statistics

Views

Total Views
938
Views on SlideShare
938
Embed Views
0

Actions

Likes
0
Downloads
22
Comments
0

0 Embeds 0

No embeds

Accessibility

Categories

Upload Details

Uploaded via as Microsoft PowerPoint

Usage Rights

© All Rights Reserved

Report content

Flagged as inappropriate Flag as inappropriate
Flag as inappropriate

Select your reason for flagging this presentation as inappropriate.

Cancel
  • Full Name Full Name Comment goes here.
    Are you sure you want to
    Your message goes here
    Processing…
Post Comment
Edit your comment
  • autowin

Presentation earthmoving equipment Document Transcript

  • 1.
    • CENTRIFUGAL OIL CLEANER
    • FOR EARTHMOVING EQUIPMENT
    Oilmax
  • 2.
  • 3.
  • 4.
  • 5. THE IMPORTANCE OF CLEAN OIL
    • Oil is the life line of engine.
    • Lubrication is vital for the peak performance and life
    • of an engine.
    • Effective filtration extends the oil drain intervals and
    • increases engine life.
    Carbon soot deposits on engine components affecting performance Centrifuge effectively removes carbon soot from engine oil Improving engine’s performance
  • 6. FULL FLOW AND BY-PASS FILTERS
    • full-flow filters have very coarse filter element (20-30 micron),
    • to allow sufficient oil flow to engine components
    • (as 100% of the oil flowing to engine components passes through
    • them.)
    • Fine particles including carbon soot starts building up in the oil as
    • it cannot be filtered by full flow filter.
    • Bypass filters process small quantity of oil (less than 10%)
    • continuously to very fine level of 1 micron and below.
    CENTRIFUGE – WHY?
    • Full flow filters cannot separate fine particles including carbon
    • soot from oil.
    • Centrifuge is perfectly capable of doing this job.
    • Centrifugal force is capable of removing a wide range of particles
    • extending into sub-micron range.
  • 7. SCHEMATIC DIAGRAM FULL FLOW AND BY-PASS FILTERS Crank shaft bearings Cam shaft bearings Valve train Piston cooling Turbo charger Full Flow Filter Oil Cooler Centrifugal Oil Cleaner Oil Pump Pump Bypass Return Oil Oil Pan Engine Components Return Oil
  • 8. ADVANTAGES OF INSTALLING CENTRIFUGAL LUBE OIL CLEANER
    • Improved lube oil cleanliness
    • Extended oil life
    • Extended service intervals
    • Reduced component wear
    • Increased engine life
    • Reduced down-time
    • Lower maintenance costs
    • Reduced cost of ownership
    • Completely reusable
    • No recurring cost
    • Protects environment
    WORKING PRINCIPLE
    • Centrifuge works on reaction turbine principle.
    • Reaction torque created by Oil spraying thru two nozzles
    • (placed tangentially and in opposite direction). spins rotor
    • at speed upto 8000 RPM
    • This develops centrifugal forces 2000 times greater than
    • gravity, separating smallest particles from oil( depositing it
    • on the inner wall of the rotor).
    • Clean oil returns to the sump by gravity.
  • 9. CONSTRUCTION
  • 10. SELECTION CHART (ENGINE MOUNTED CENTRIFUGE) Centrifuge Model Nominal Flow Rate Dirt Holding Capacity Suitable for Engine Oil Sump Capacity SCC 020 200 LPH 200 cc 20 Ltr. SCC 025 250 LPH 250 cc 30 Ltr. SCC 050 500 LPH 500 cc 60 Ltr. SCC 060 600 LPH 600 cc 80 Ltr. SCC 100 700 LPH 1000 cc 120 Ltr. SCC 200 1200 LPH 2000 cc 700 Ltr. SCC 600 4000 LPH 6000 cc. 3000 Ltr.
  • 11. SELECTION CHART (STANDALONE SYSTEM) Oil Cleaning System Model Centrifuge Model Nominal Flow Rate Dirt Holding Capacity Suitable for Engine Oil Sump Capacity AWS 750 SCC 100 700 LPH 1000 cc 200 Ltr. AWS 1500 SCC 200 1500 LPH 2000 cc 1000 Ltr. AWS 4000 SCC 600 4000 LPH 6000 cc. 4000 Ltr. AWS 1000P SCC O75 1000 LPH 1000 cc. For Hydraulic Oil