AdePlast Catalogue -English Version
Upcoming SlideShare
Loading in...5
×

Like this? Share it with your network

Share

AdePlast Catalogue -English Version

  • 1,569 views
Uploaded on

AdePlast English Catalogue. Find everything about AdePlast products, style and vision. All you need for construction.

AdePlast English Catalogue. Find everything about AdePlast products, style and vision. All you need for construction.

  • Full Name Full Name Comment goes here.
    Are you sure you want to
    Your message goes here
    Be the first to comment
No Downloads

Views

Total Views
1,569
On Slideshare
862
From Embeds
707
Number of Embeds
2

Actions

Shares
Downloads
5
Comments
0
Likes
1

Embeds 707

http://adeplast.ro 688
http://translate.googleusercontent.com 19

Report content

Flagged as inappropriate Flag as inappropriate
Flag as inappropriate

Select your reason for flagging this presentation as inappropriate.

Cancel
    No notes for slide

Transcript

  • 1. CTLG AA O
  • 2. 17 YEARS OF FIGHT OVER SUPREMACY! About us Founded in the year 1996, ADEPLAST is a dynamic company which is present on the construction materials market in Romania and on other markets as well, which grows continuously according to customers and partners demands, offering perfectly adaptable complete solutions. ADEPLAST is the only company with 100% Romanian funds which is on the top 10 manufacturer list next to multinational companies with high reputation like “Lafarge Cement”, “Holcim”, “Carpatcement Holding”. The spectacular evolution of the company has determined the extension of her production capacities, at present time there is a factory in Oradea, one in Ploiesti and another in Roman. Today we have finish another paint&plasters factory in Ploiesti. Evolution and perspectives At the starting point of ADEPLAST, Marcel Barbut owned 96% of company shares, investing 10.000 $ - the equivalent of 31.000.000 Lei at that period. The other four associates contributed with only 8$, meaning 25.000 Lei. However, the profit was split equally. Within one year the associates had the right to re-buy the shares. By the profit they made, the four share-holders had bought their shares, each one of them having 20%. In the year 2002 Mr. Marcel Barbut bought from Mr. Aron another 10% from the share-package with 125.000 Euro, managing to own 30% of the company shares. The same thing is being done by Mr. Flaviu Pop who manages to hold 30% of the shares, also. In the year 2005 the Stefani family together with Mr. Marcel Barbut bought Mr. Flaviu Pop and Mr. Erdosi shares with the sum of 5.000.000 Euro and in this way Mr. Barbut manages to hold 60% of the shares and the Stefani family only 40%. In 2007 Mr. Marcel Barbut buys for 6.000.000 Euro the shares of Stefani family and manages to own all the shares of AdePlast. In the same year Mr. Marcel Barbut gives one share to Mrs. Cristina Paveliuc and transforms AdePlast in a company based on stocks, his intention being to have it rated on the Stock-Market so that he can obtain the necessary funds for a new development. Because of the economical crisis during that time Mr. Marcel Barbut gives up at the Stock-Market ratings and starts investing, very seriously, in the development of the company throughout credits. Because of the continuous ascension of the company and also her profitability the UNICREDIT TIRIAC Bank has sustained and she still does all the initial plans for development of AdePlast. The company has ended he year 2012 with a growth of 30% and a temporary EBITDA of 7.900.000 Euro. The company has reach the economical crisis having an EBITDA value of over eight times, meaning 63.000.000 Euro. Mr. Marcel Barbut did not give up his plan of listing the company to the Stock-Market. INTERCAPITAL, close related to ERSTE will share the AdePlast investment group to the Stock-Market for developing a surprise investment. Brief History • 1994, founded at Oradea, having the name “Multistar Prod S.R.L.” • 1996 Mr. Marcel Bărbuţ becomes share-holder and the company becomes an austrian-romanian mixt company, the goal of the company becomes the production of adhesives mortars for ceramic tiles, plasters, industrial floors 2
  • 3. and automatized mortars under the trademark of ADEPLAST SA. • 2004, June, Dry Mortars Factory in Oradea. • 2005-2007, a strong auto fleet is created. • 2007, Multistar Prod S.R.L. becomes a company based on bonds named ADEPLAST S.A. • 2008 July, Paints and Decorative Plasters Factory in Oradea. • 2008 September, Dry Mortars Factory in Ploieşti. • 2011 May, “Dry-Sieving Sand Instalation” created for Dry Mortars Factory in Oradea • 2011 June, Polystyrene Factory in Ploiesti • 2012 November, Production Line for graphite polystyrene Factory in Ploiesti Locations Industrial Platform - Ploiesti Dry mortars factory The factory produces 450.000 tones/year of dry mortars, has large warehouses and a very well based logistic. Expanded polystyrene factory This factory has a capacity of producing white polystyrene for over 700.000 cubic meters. The production line bought from Zentyss makes 150.000 cubic meters per year of graphite polystyrene being a line dedicated to this profile. As a result, the entire capacity of production is of 850.000 cubic meters. Paints and decorative plasters factory At the beginning of August - 2013, at Ploiesti, a new factory of paits and decorative plasters has been build with a value of aprox. 6.000.000 Euro. The factory has a production capacity of 20.000 tones/year and she is fully automatized - the factory is being operated by 5 employes only. 3
  • 4. Oradea Industrial Platform Paints and decorative plasters factory The total production capacity reaches to 20.000 tones/year for washable paints and decorative plasters. The production is made only by 5 employes because the factory is completely automatized. Dry mortars factory We produce annually about 250.000 tones of dry mortars. 25 - 40% of production is designated to export in countries such as: Hungary, Slovakia, Germany and Austria. The purpose of ADEPLAST is to export as a unit the components of an integrated system (adhesives, polystyrene, fillers foundation and decorative plasters). Expanded polystyrene factory The polystyrene factory will have a capacity identical to the one in Ploiesti of over 700.000 m³ and is the only one in Europe who can produce white and graphite polystyrene at the same time. The total capacity predicted for the polystyrene production, of both types, for Oradea, Roman and Ploiesti locations will be of over 2.250.000 m³/year. Roman Industrial Platform Dry mortars factory The investment was started in the year 2010, but postponed due to the lack of a financially support and bureaucratic impediments from the government and local authorities. Started all over again by own efforts in the year 2012 and against all difficulties, the new adhesives and dry mortars factory rises in a sustained way. At the beginning of the year 2013 the factory is up and ready and manages to produce over 450.000 tones/year of adhesives and dry mortars - European quality. Expanded polystyrene factory The factory will have a capacity identical to the one in Ploiesti of 700.000m³ being the only one in Europe who can produce both brands - white and graphite polystyrene. 4
  • 5. ADEPLAST - European Class Competitor Adeplast currently produces over 50 varieties of building materials. ADEPLAST force in Romania will rise to eight production facilities in dry mortars, plasters, paints and insulating materials, becoming one of the major players in Europe markets. In its location ADEPLAST created hundreds of jobs, has developed partnerships with distributors, manufacturers, carriers and various other vendors, contributed to local budgets and continuously developed long term relationships. Investing and permanently modernizing, ADEPLAST is ready for any challenge, being a competitor and a leading European partner. Marcel Bărbuț 5
  • 6. professional series - ADEPLAST innovation professional series - ADEPLAST innovation PROFESSIONAL SERIES - ADEPLAST INOVATION GENERAL TERMS In this way, Adeplast is launching an innovative range of products on the Romanian market, which contain a special ingredient, created to ensure particular features, named PORUS X. This ingredient has the ability of waterproofing, maintains surface porosity and also reduces significantly water absorption. The Porus X ingredient, founded exclusively in the professional range of ADEPLAST products, provides properties that set apart this products compared with others that are already on the market: Constant and persistent improvement of the product quality and also of all the features, design and diversification are to ADEPLAST a new action concept created for the needs of the customers there-for increasing their loyalty and satisfaction. - Water resistance: hydrophobic action for the surfaces on which that products are applied (“pearl effect”). - Increased permeability to water vapours: breathable wall. - Durability: increases the life of the surface. COMPONENT RANGE: AERIA STONE with PORUS X AERIA with PORUS X - EXTERIOR PAINT 6 AERIA PLAST with PORUS X - DECORATIVE PLASTER AERIA with PORUS X - INTERIOR PAINT
  • 7. professional series - ADEPLAST innovation AERIA Series - revolutionary vectors of the PORUS X ingredients. AERIA STONE with PORUS X - hydrophobic action for natural stones and facades Application: Consumption: APVI AERIA with PORUS X - interior paint Application: Consumption: Colouring: APVE For painting all mineral interior layers based on lime, lime-cement, lime-plaster, plaster, concrete. Recommended for professional use, to obtain breathable surfaces with high resistance to contamination. Approx. 0,20 - 0,30 liters / m², on two layers. The product is delivered by the manufacturer already colored at the option of the beneficiary, based on ADEPLAST color chart, or is delivered white. AERIA with PORUS X - exterior paint Application: Consumption: Colouring: APT For impregnating mineral surfaces, natural stones, etc. in order to eliminate water absorption and to obtain the “pearl effect”without changing the looks of the impregnated layer. Approx. 50-100 ml / m² depending on the absorbency and the nature of the substrate. To determine actual consumption, we recommend testing directly on the construction site on the surface that requires finishing. professional series - ADEPLAST innovation APAH0 For painting all mineral exterior layers based on cement, plaster and for renovation of areas covered with dispersion paint or decorative plasters, aiming for a colored finish with brilliant hues. Approx. 0,20 - 0,30 liters / m², on two layers. The product is delivered by the manufacturer already colored at the option of the beneficiary, based on ADEPLAST color chart, or is delivered white. AERIA PLAST with PORUS X - decorative plaster Application: It is used for decorative coatings and professional finishing with waterproof and breathable effect particularly on the interior and exterior works. Can be applied to any type of mineral surfaces: plasters, concrete, masonry, etc.. Professional quality - can be easily applied in a single layer. Recommended for professional use. Colouring: The product is delivered by the manufacturer already colored at the option of the beneficiary, based on ADEPLAST color chart, or is delivered white and colored when applied using coloring paste. Consumption: - Troweled plaster: 1,0 mm - 2,0 kg / m² 1,5 mm - 2,5 kg / m² 3,0 mm - 3,5 kg / m² - Scratched plaster: 2,0 mm - 2,8 kg / m² 3,0 mm - 3,1 kg / m² - Roled plaster: 1,5 kg ÷ 2,5 kg / m² 7
  • 8. professional series - ADEPLAST innovation professional series - ADEPLAST innovation Silicon Based Paints and Decorative Plasters Silicone decorative plaster is a decorative structured plaster in relief, ready to be use, based on silicone resin, diluted with water. Washable, elastic, flexible, waterproof with hydrophobic properties, resistant to scratch and impact, highly resistant to aggressive environmental factors such as rain, humidity, temperature variations, solar radiation, pollution, etc. - it is used for decorative coatings and special effect finishes for interior and exterior works. Can be applied to any type of mineral surfaces: plasters, concrete, masonry, but are recommended for historic buildings and monuments and also on the north side of buildings. Due to its higher professional quality, it can be easily applied in a single layer or as a trowel plaster, scratched or rolling. The product is delivered by the manufacturer already colored at the option of the beneficiary, based on ADEPLAST color chart, or is delivered white and colored when applied using coloring paste. Silicone decorative plaster should be applied on dry, dust-free and carrying surfaces. Any projections will be removed. Inhomogeneous surfaces showing oil substances or otherwise, which could form a film between the material and support must be treated accordingly. Work performed with finishing products materials from ADEPLAST. 8 On how to apply the paint, in the case of trowel plaster (of 1.0mm, 1.5mm and 3.0mm) and the scratched plaster (of 2.0mm and 3.0mm), this will apply with the stainless steel trowel (float metal) in a thin layer (optimum layer thickness as close as the diameter of the granules). On the trowel plaster the structuring is made in a uniform way until you obtain the desired relief and appearance: granular - calcium type. At the scratched plaster you can choose the layout, direction and form of the grooves depending on how the structure is made (vertical, horizontal, round, irregular, etc..). Role plaster application will be made with a stainless steel trowel with teeth of 4mm and after that the material is spread evenly with a structure roller made of harsh sponge (surface with holes) in a vertical way and then horizontal. The material cannot be applied in bright sunlight or at high wind or when there is a risk of rain or freezing they may cause, during application and drying, cracking and colour differences. After application, the external surfaces will be protected from rain, until completely dry (48 h at 20 ˚C). For any coloured plasters, joints and joiners between colours are made using self-adhesive paper.
  • 9. professional series - ADEPLAST innovation DECOPLAST SILICONICĂ- STRUCTURED DECORATIVE PLASTER Application: Colouring: Consumption: Packaging: Pallet Stand: Quality Standard: 28 kg bucket. 24 buckets/pallet 672 kg. SR EN 15824:2009. base type B1 - white base, pastel colors structure TROWELED Product code: SITD15B1 PLASTER 1,5 mm SCRATCHED Product code: PLASTER 2,0 mm ROLED PLASTER SIVE Product code: Used for decorative coatings and special effect finishes in indoor and outdoor works. Can be applied to any type of mineral surfaces: plasters, concrete, masonry, etc.. Professional quality, can be easily applied in a single layer. The product is delivered by the manufacturer already colored at the option of the beneficiary, based on ADEPLAST color chart, or is delivered white and colored when applied using coloring paste. -Troweled plaster: 1,5 mm - 2,5 kg/m² - Scratched plaster: 2,0 mm - 2,8 kg/m² Indicated consumption refers to perfectly smooth surfaces and may vary depending on the thickness of the coating and the characteristics of the base-layer. For this reason we can not accept any liability in relation to material requirements for each case. B2 - intermediary base, pastel colors B3 -transparent base, pastel colors Product code: SITD15B2 Product code: SITD15B3 SITZ20B1 Product code: SITZ20B2 Product code: SITZ20B3 SITRB1 Product code: SITRB2 Product code: SITRB3 professional series - ADEPLAST innovation SIT VOPSEAUA MESERIAȘULUI - SILICON Application: Colouring: Consumption: Packaging: Pallet Stand: Quality Standard: For painting all interior and exterior mineral surfaces. Can be applied to any type of new mineral surfaces based on cement or plaster and also for renovating areas covered with dispersion paints or decorative plasters in order to obtain a colored finish and brilliant hues. Recommended for mineral insulating system based on mineral wool, restoration of historical monuments, old buildings and on the north side of buildings. The product is delivered by the manufacturer already colored at the option of the beneficiary, based on ADEPLAST color chart, or is delivered white and colored when applied using coloring paste. Approx. 0,20 - 0,30 liters / m², on two layers. 5 L bucket. 24 buckets/pallet 672 kg. Approved product by INCERC s.a. B2 - intermediary base, pastel colors B3 -transparent base, pastel colors SIVE3LB1 Product code: SIVE3LB2 Product code: SIVE3LB3 Product code: SIVE8LB1 Product code: SIVE8LB2 Product code: SIVE8LB3 Product code: base type B1 - white base, pastel colors Product code: package SIVE15LB1 Product code: SIVE15LB2 Product code: SIVE15LB3 3L 8L 15 L 9
  • 10. professional series - ADEPLAST innovation professional series - ADEPLAST innovation ADHESIVES & PRIMERS - PROFESSIONAL SERIES Ceramic tiles with Adhesives AFX-9 and AF 11 plus, from the professional range, are used for laying tiles and plating absorbent and poorly absorbed sandstones from the inside, in dry environments, without moisture and excessive heat, on rough and stable support (plaster and cement lime, BCA, concrete, cement screeds, etc.). The support surface must be reinforced, clean, dry, free of cracks, adherent and compact, free from grease, dust, loose residues and salts. Old mortar with bumps and warps will be removed. The layout surface will be rendered with mortar made of lime or cement or with other mortars from the ADEPLAST® series. Professional finishing systems The Plaster with Porus X from professional series is used for finishing interior surfaces without excessive moisture from concrete, lightweight concrete, dry plaster, cement, lime and gypsum blocks. It is intended to provide very fine and smooth surfaces before painting or oil painting. The specific ingredient - Porus X, developed specifically for ADEPLAST provides increased system performance and defines specific qualities: - High permeability to water vapours. It allows the wall to breathe but does not allow water to enter from the outside. -Durability: increases the life of the finish surfaces. 10 System Components: 1. Porus X Wall Primer. Prepares the layout surface by reducing and smoothing absorption. The surface must be clean, adherent and compact, old - for at least 30 days, free of grease, dust, loose residues, salts and gypsum traces. 2. GM-126 - Porus X Plaster Filling. His role is to cover bad surfaces in order to prepare them for finishing layouts and to ensure that bumps aren’t bigger than 5 mm. 3. GM-127 - Porus X Finishing Plaster. Super white, with a very good workability for obtaining impeccable surfaces. 4. AERIA with Porus X - Interior Paint. Excellent coverage, increased permeability to water vapours. It allows the wall to breathe, but does not allow water to enter from the outside.
  • 11. professional series - ADEPLAST innovation Ceramic tiles adhesives - POLYMER 1000X AFX-9 SPECIAL ADHESIVE FOR CERAMIC TILES – FOR INTERIOR For tiling works and cladding tiles at the inside, in dry environments, without moisture and excessive heat on medium rough and stable mineral support(cement and lime plaster, brick, concrete, cement screeds, etc..). NOTE: Do not apply on gypsum boards. Consumption: AF 11 plus Application: about 3-4 kg / m² depending on the quality of the layout. Application: For Tiling works and cladding tiles, porcelain tiles, tile over tile, dapper cement and so on, for inside or outside, exposed to temperatures between -25 ° C and + 80 ° C in wet or dry environments. Do not apply on metal support, wood, plastic, etc. about 3-4 kg / m² depending on the quality of the layout. 5 945762 011800 Product code: Packaging: Pallet Stand: Quality Standard: AF 11 plus bag of 25 kg 48 bag/pallet 1200 kg SR EN 13279-1:2008 5 94576 2 01 1 8 1 7 Finishing Plasters cu PORUS X GYPSUM BASED PLASTER WITH PORUS X, FOR FINISHING WORKS Application: For finishing interior surfaces without excessive moisture from the concrete, lightweight concrete, cement based dry plasters, cement - lime, gypsum blocks. It is used to obtain very fine and smooth surfaces before painting or oil painting. Consumption: GM 127 AFX 9 bag of 25 kg 48 bag/pallet 1200 kg SR EN 13279-1:2008 SPECIAL ADHESIVE FOR PORCELAIN CERAMIC TILES Consumption: GM 126 Product code: Packaging: Pallet Stand: Quality Standard: professional series - ADEPLAST innovation 0,5 to 1 kg/m² at 1 mm thickness applied. Product code: Packaging: Pallet Stand: Quality Standard: GM 126 bag of 20 kg 48 bag/pallet 960 kg SR EN 13279-1:2008 5 94576 2 01 1 7 9 4 CEMENT BASED PLASTER WITH PORUS X, FOR FINISHING WORKS Application: For finishing interior and exterior surfaces of concrete, lightweight concrete, cement dry-based plasters, cement - lime and where there is a risk of a wet environment after application (bathroom, kitchen, rooms like indoor swimming pool, etc.). It is used to obtain very fine and smooth surfaces. Consumption: 0,5 to 1 kg/m² at 1 mm thickness applied. Product code: Packaging: Pallet Stand: Quality Standard: GM 127 bag of 20 kg 48 bag/pallet 960 kg SR EN 13279-1:2008 5 94576 2 01 1 7 8 7 11
  • 12. adhesives for tiling adhesives for tiling ADHESIVES FOR TILING Preparation Guide for ceramic tiles adhesives Mixing Trowel The consistency of the material on the trowel 12 Application of the material on the support surface SUPPORT SURFACE: It must be strengthened, clean, dry, free of cracks, adherent and compact, free from grease, dust, breakable residues and salts. Swelling and warp old mortar will be removed. The support surface will be plastered with ordinary mortar and lime or with mortars from ADEPLAST® mortars range. For uneven surfaces such as screeds we will apply a levelling screed. In the case of surfaces that must be plated in wet areas, outside or at the pool, you can, in advance, waterproof the surface with ADEPLAST® MH-1K waterproofing mono-component membrane. In the case of bad or deformable support surfaces, it is necessary to use AF-S white or AF-S grey. BCA walls will be plastered in advance with mortar based on cement-lime (ADEPLAST ® MTI-25 indoor ADEPLAST ® Outdoor MTE-35) after complete curing of the mortar (7 days/cm applied layer thickness) and then the adhesive can be applied. TOOLS NEEDED: - bucket - mechanical or by hand mixer - trowel - notched with teeth of 6 x 6 mm, 8 mm x 8 mm or 10 x 10 mm depending on the size of the plate - construction level - tile cutter PREPARATION AND APPLICATION: The powder is introduced into water and then we begin mixing. Both the container and the water used must be clean. It is recommended to mix a quantity that is used once in an hour. Mixing is done vigorously, preferably mechanical (to an electric drill an axle paddle can be attach) until a creamy mixture, homogeneous, easy to be processed and with suitable fluidity. In the event that an insufficient amount of water is added, the product loses its adhesive properties. Wait 10 minutes for the completion of chemical reactions and mix vigorously again. The paste is placed on the surface in a thickness of 4-5 mm, after which rake with a comb with teeth of 6-8 mm in width and depth. Raking the paste has a double advantage: increases grip plate and reduces the material consumption. Paste deposited on the adhesive pad maintains properties for 15-20 minutes. Paste adhesive capacity can be checked by tapping the surface with fingers. Sticky fingers indicate that paste adhesive is suitable. Plates are placed onto the adhesive layer and pressure is applied vigorously, followed by tapping movements, in order to ensure the largest possible contact area ( at least 75 % of the back of the plate ). In the case of AF-N ADEPLAST ® adhesive, when tiles are applied over a smooth surface like dapper cement, mosaic, old tiles, the surface must be clean in advance by washing with warm water and liquid detergent - wash traces of detergent with water, wipe surface with a clean, dry cloth, then apply a bonding layer of 0.5 - 1 mm thick AF-N ADEPLAST® adhesive and leave it for 24 hours to harden. The next day, over this layer, the mixture is applied using a comb shape trowel. The paste from the bucket retains its adhesives properties for at least 2 hours. Joints are closed with ADEPLAST KITS JOINTS, ADEPLAST QK-6 or QK-15, after a minimum curing period of 24 hours. Any subsequent work will be done after a minimum of 72 hours from the plating time. THE SURFACE BECOMES USABLE: After a minimum of 24 hours for ADEPLAST JOINTS KITS, ADEPLAST QK-6 or QK-15 - adhesive kits for joints. After less than 72 hours for general use.
  • 13. adhesives for tiling adhesives for tiling Specific consumption optimization by raking. Plate adhesive appliance. Application of the material on the support surface. Applying the plate and tapping. AF-I IMPORTANT: At temperatures below 20 ° C the curing time is extended. In addition to the above it is important to follow all the rules and standards that are now in place. Guaranteed characteristics are based on practical experience and tests. The specific location and application may be different from those presented here, therefore, proper and successful use of our products is not in our sphere of responsibility. CERAMIC TILES ADHESIVE FOR INTERIOR SURFACES Scope of use: Specific consumption: Tiling works and cladding tiles for inside surfaces, in dry environments, without moisture and excessive heat on rough and stable mineral surfaces (cement and lime plaster, brick, concrete, cement screeds, etc.). NOTE: Do not apply on gypsum boards. approx. 3 - 4 kg/m² depending on the quality of the support surface. Product code: Packaging: Pallet Stand: Quality Standard: AF-E afi05 bag of 5 kg 140 bags/pallet 700 kg SR EN 12004 / 2008 Product code: Packaging: Pallet Stand: Quality Standard: afi25 bag of 25 kg 48 bags/pallet 1200 kg SR EN 12004 / 2008 Product code: Packaging: Pallet Stand: Quality Standard: afi5x5 box of 5 x 5 kg 28 boxes/pallet 700 kg SR EN 12004 / 2008 Product code: Packaging: Pallet Stand: Quality Standard: afe25 bag of 25 kg 48 bags/pallet 1200 kg SR EN 12004 / 2008 Product code: Packaging: Pallet Stand: Quality Standard: afe5x5 box of 5 x 5 kg 28 boxes/pallet 700 kg SR EN 12004 / 2008 CERAMIC TILES ADHESIVE FOR EXTERIOR SURFACES Scope of use: Specific consumption: Tiling works and cladding tiles for inside or outside surfaces, exposed to temperatures between -20 ° C and +80 ° C in wet or dry environments, on rough backing mineral surfaces (cement and lime plaster, brick, concrete, screed of cement, etc.). approx. 3 - 4 kg/m², depending on the quality of the support surface. Product code: afe05 Packaging: bag of 5 kg Pallet Stand: 140 bags/pallet 700 kg Quality Standard: SR EN 12004 / 2008 13
  • 14. adhesives for tiling adhesives for tiling AF CERAMIC TILES ADHESIVE FOR INTERIOR / EXTERIOR SURFACES Scope of use: Specific consumption: AF-N Scope of use: Tiling works and cladding tiles, porcelain tiles, tile over Product code: tile, dapper cement and so on, for inside or outside, Packaging: exposed to temperatures between -25 ° C and + 80 ° C Pallet Stand: in wet or dry environments and also for the applicaQuality Standard: tion of ceramic tiles over under-floor heating. It can be used for application of clinker and greso-granite plates, tiles, gypsum boards, façade appliance of Basalt tiles for exterior insulation of houses build on Rockwool (Fasrock, Frontrock) or Nobasil (FKL) patterns. approx. 3 - 4 kg/m² depending on the quality of the support surface. Scope of use: Tiling works and cladding tiles, porcelain tiles, tile over tile, dapper cement, marble, granite and so on, for inside or outside, exposed to temperatures between -25 ° C and + 80 ° C in wet or dry environments, and also for the application of ceramic tiles over under -floor heating. It can be used for application on clinker and greso-granite plates, tiles, gypsum boards, big tiles over mineral sub-surfaces. Product code: Packaging: Pallet Stand: Quality Standard: af-s grey bag of 25 kg 48 bags/pallet 1200 kg SR EN 12004 / 2008 Product code: Packaging: Pallet Stand: Quality Standard: af-s white bag of 25 kg 48 bags/pallet 1200 kg SR EN 12004 / 2008 Product code: Packaging: Pallet Stand: Quality Standard: af11+ bag of 25 kg 48 bags/pallet 1200 kg SR EN 12004 / 2008 SUPERFLEXIBLE HIGH STRENGHT ADHESIVE Scope of use: Tiling works and cladding tiles, porcelain tiles, tile over tile, dapper cement, marble, granite and so on, for inside or outside, exposed to temperatures between -25 ° C and + 80°C in wet or dry environments, and also for the application of ceramic tiles over under-floor heating. It can be used for application on clinker and greso-granite plates, tiles, gypsum boards, big tiles over mineral sub-surfaces and where white colored adhesive is needed. approx. 3 - 4 kg/m², depending on the quality of the support surface. PORZELLANO - ADHESIVE FOR PORCELAIN TILES Scope of use: Specific consumption: 14 af-n bag of 25 kg 48 bags/pallet 1200 kg SR EN 12004 / 2008 approx. 3 - 4 kg/m², depending on the quality of the support surface. Specific consumption: AF-11 + af bag of 25 kg 48 bags/pallet 1200 kg SR EN 12004 / 2008 SUPERFLEXIBLE HIGH STRENGHT ADHESIVE Specific consumption: AF-S WHITE Product code: Packaging: Pallet Stand: Quality Standard: HIGH STRENGTH SUPERPLASTIC ADHESIVE Specific consumption: AF-S GREY Tiling works and cladding tiles for inside or outside surfaces, exposed to temperatures between -20 ° C and +80 ° C in wet or dry environments, on rough mineral surfaces (cement and lime plaster, BCA, concrete, screed of cement, etc.). approx. 3 - 4 kg/m², depending on the quality of the support surface. Tiling works and cladding tiles, porcelain tiles, tile over tile, dapper cement, marble, for inside or outside, exposed to temperatures between -25 ° C and + 80°C in wet or dry environments. Do not apply on metal support, wood, plastic, etc. approx. 3 - 4 kg/m², depending on the quality of the support surface.
  • 15. adhesives for tiling FS-57 WHITE WHITE ADHESIVE FOR NATURAL STONES approx. 3 - 4 kg/m², depending on the quality of the support surface. fs-57w bag of 25 kg 48 bags/pallet 1200 kg SR EN 12004 / 2008 Product code: Packaging: Pallet Stand: Quality Standard: fs-57g bag of 25 kg 48 bags/pallet 1200 kg SR EN 12004 / 2008 Product code: Packaging: Pallet Stand: Quality Standard: mx-white bag of 25 kg 48 bags/pallet 1200 kg SR EN 12004 / 2008 GREY ADHESIVE FOR NATURAL STONES Scope of use: For the construction of natural stone coverings, with average absorption, from the inside or outside, exposed to temperatures between -25 ° C and + 80 °C, in wet or dry environments. Do not apply on hard metal, wood, plastic, etc. Specific consumption: MX WHITE Product code: Packaging: Pallet Stand: Quality Standard: approx. 3 - 4 kg/m², depending on the quality of the support surface. WHITE ADHESIVE FOR MARBLE AND GRANITE Scope of use: Tiling works and cladding big tiles, marble tiles, granite and other natural stones, clinker and greso-granite, where keeping the white colour of the adhesive to the most demanding work inside or outside the building is necessary, for cladding low temperature rooms and over-heated flooring, exposed to temperatures between -25 ° C and +90 ° C, in wet or dry environments. Specific consumption: MX GREY approx. 3 - 4 kg/m², depending on the quality of the support surface. ADHESIVE FOR MARBLE AND GRANITE Scope of use: Tiling works and cladding big tiles, marble tiles, granite and other natural stones, clinker and greso-granite, for interior and exterior jobs that need special care, for cladding low temperature rooms and over-heated flooring, exposed to temperatures between -25 ° C and +90 ° C, in wet or dry environments. Specific consumption: MH-1K adhesives for tiling For the construction of natural stone coverings, with average absorption, from the inside or outside, exposed to temperatures between -25 ° C and + 80 °C, in wet or dry environments, where the white colour of the adhesive is required. Do not apply on hard metal, wood, plastic, etc.. Specific consumption: FS-57 GREY Scope of use: approx. 3 - 4 kg/m², depending on the quality of the support surface. Product code: Packaging: Pallet Stand: Quality Standard: mx-grey bag of 25 kg 48 bags/pallet 1200 kg SR EN 12004 / 2008 MONO-COMPONENT WATERPROOF MEMBRANE Scope of use: It is used for waterproofing works on terraces, balconies, pools or water tanks before plating with ceramic tiles, natural stone or marble. For plating, use only a flexible adhesive such as GREY AF-S or WHITE AF-S. Due to the grain size of 0.8 mm the surface roughness is very high, resulting in an increased adherence of the adhesive applied to the waterproof membrane. Do not use for swimming pools and water tanks with depths over 4 meters, on surfaces that are generating efflorescence and also on mineral surfaces with low compressive strength (breakable surfaces). Specific consumption: approx. 3 - 5 kg/m² (depending on the quality of the support surface), with a total thickness of 2mm / maximum 2 layers. Product code: Packaging: Pallet Stand: Quality Standard: mh-1k bag of 25 kg 48 bags/pallet 1200 kg SR EN 14891: 2008 15
  • 16. expanded polystyrene thermal insulation materials expanded polystyrene thermal insulation materials THERMAL INSULATING MATERIALS Thermal Insulation Boards of Fire Retardant Expanded Polystyrene Beads ADP70 FIRE RETARDANT EXPANDED POLYSTYRENE BOARDS Field of use: As thermal insulation boards intended for: - spaces with no particular static load - insulation of spare spaces - indoor insulation and ceiling intra-dos Cutting thickness [mm]: as per SR EN823 ... 20, 30, 40, 50, 60, 70, 80, 90, 100, 110, 120, 130, 140, 150, 160 +/- 2 mm T1 Technical features: Panel size (length x width [mm]) ................................................ 1000 x 500 mm +/- 3 mm L1 x W1 Perpendicularity, as per SR EN 824 ...................................................................... +/- 2mm /1 m S2 Evenness, as per SR EN 824 ...................................................................................... +/- 5 mm P4 Bending resistance, as per SR EN 12089 .................................................................. BS75 BS≥75 Compressive stress at a 10%, deformation, as per SR EN 826 ………………...... CS10(50) CS≥50 Traction resistance, as per SR EN 1607 ..................................................................... TR50 TR≥50 Thermal conductivity [W/m•K] .............................................................................................. 0,040 Adustion class, as per SR EN 13501-1 ............................................................... Euroclass B-s2,d0 ADP80 FIRE RETARDANT EXPANDED POLYSTYRENE BOARDS Field of use: As thermal insulation boards intended for: - spaces with no particular static load - insulation of spare spaces - indoor insulation and ceiling intra-dos - facades Cutting thickness [mm]: as per SR EN823 ... 20, 30, 40, 50, 60, 70, 80, 90, 100, 110, 120, 130, 140, 150, 160 +/- 2 mm T1 Technical characteristics: Board size length x width [mm]) ........................................... 1000 x 500 mm +/- 3 mm L1 x W1 Perpendicularity, as per SR EN 824 ................................................................ +/- 2mm /1 m S2 Evenness, as per SR EN 824 ..................................................................................... +/- 5 mm P4 Bending resistance, as per SR EN 12089 ........................................................... BS100 BS≥100 Compressive stress at a 10%, deformation, as per SR EN 826 ....................... CS10(60) CS≥60 Traction resistance, as per SR EN 1607 ................................................................... TR50 TR≥50 Thermal conductivity [W/m•K] ............................................................................................... 0,040 Adustion class, as per SR EN 13501-1 ............................................................ Euroclass B-s2,d0 EPS70 FIRE RETARDANT EXPANDED POLYSTYRENE BOARDS Field of use: Cutting thickness [mm]: As thermal insulation boards intended for: - ventilated facades - ETICS system facades (External thermal insulation composite systems) as per SR EN823 ... 20, 30, 40, 50, 60, 70, 80, 90, 100, 110, 120, 130, 140, 150, 160 +/- 2 mm T2 Technical characteristics: Board size length x width [mm])…………............................... 1000 x 500 mm +/- 3 mm L2 x W2 Perpendicularity, as per SR EN 824 ................................................................ +/- 2mm /1 m S2 Evenness, as per SR EN 824 ................................................................................... +/- 5 mm P4 Bending resistance, as per SR EN 12089 .....,,,,,,,,,,,,,,,,..................................... BS115 BS≥115 Compressive stress at a 10%, deformation, as per SR EN 826 ...................... CS10(70) CS≥70 Traction resistance, as per SR EN 1607 .................................................................. TR50 TR≥50 Thermal conductivity [W/m•K] .............................................................................................. 0,039 Adustion class, as per SR EN 13501-1 ........................................................ Euroclass B-s2,d0 16
  • 17. expanded polystyrene thermal insulation materials EPS80 FIRE RETARDANT EXPANDED POLYSTYRENE BOARDS As thermal insulation boards intended for: - ventilated facades - ETICS system facades (External thermal insulation composite systems) as per SR EN823 ... 20, 30, 40, 50, 60, 70, 80, 90, 100, 110, 120, 130, 140, 150, 160 +/- 2 mm T2 Technical characteristics: Board size length x width [mm]) .............................................. 1000 x 500 mm +/- 3 mm L2 x W2 Perpendicularity, as per SR EN 824 .................................................................. +/- 2mm /1 m S2 Evenness, as per SR EN 824 .................................................................................... +/- 5 mm P4 Bending resistance, as per SR EN 12089 ............................................................. BS150 BS≥150 Compressive stress at a 10%, deformation, as per SR EN 826 ……………....... CS10(80) CS≥80 Traction resistance, as per SR EN 1607 ................................................................ TR150 TR≥150 Thermal conductivity [W/m•K] .............................................................................................. 0,038 Adustion class, as per SR EN 13501-1 ............................................................. Euroclass B-s3, d0 EPS80+ FIRE RETARDANT EXPANDED POLYSTYRENE BOARDS Field of use: Cutting thickness [mm]: As thermal insulation boards intended for: - ventilated facades - ETICS system facades (External thermal insulation composite systems) as per SR EN823 ... 20, 30, 40, 50, 60, 70, 80, 90, 100, 110, 120, 130, 140, 150, 160 +/- 2 mm T2 Technical characteristics: Board size length x width [mm]) .............................................. 1000 x 500 mm +/- 3 mm L2 x W2 Perpendicularity, as per SR EN 824 .................................................................. +/- 2mm /1 m S2 Evenness, as per SR EN 824 .................................................................................... +/- 5 mm P4 Bending resistance, as per SR EN 12089 ............................................................. BS150 BS≥150 Compressive stress at a 10%, deformation, as per SR EN 826 ……………....... CS10(80) CS≥80 Traction resistance, as per SR EN 1607 ................................................................ TR150 TR≥150 Thermal conductivity [W/m•K] .............................................................................................. 0,038 Adustion class, as per SR EN 13501-1 ............................................................. Euroclass B-s3, d0 EPS100 FIRE RETARDANT EXPANDED POLYSTYRENE BOARDS Field of use: Cutting thickness [mm]: As thermal insulation boards intended for: - average static load spaces, non –traffic terraces, under leveling concrete flooring - ETICS system facades (External thermal insulation composite systems) as per SR EN823 ... 20, 30, 40, 50, 60, 70, 80, 90, 100, 110, 120, 130, 140, 150, 160 +/- 2 mm T2 expanded polystyrene thermal insulation materials Field of use: Cutting thickness [mm]: Technical characteristics: Board size length x width [mm]) .............................................. 1000 x 500 mm +/- 3 mm L2 x W2 Perpendicularity, as per SR EN 824 .................................................................. +/- 2mm /1 m S2 Evenness, as per SR EN 824 .................................................................................... +/- 5 mm P4 Bending resistance, as per SR EN 12089 ............................................................. BS170 BS≥170 Compressive stress at a 10%, deformation, as per SR EN 826 ……………....... CS10(100) CS≥100 Traction resistance, as per SR EN 1607 ................................................................ TR150 TR≥150 Thermal conductivity [W/m•K] .............................................................................................. 0,036 Adustion class, as per SR EN 13501-1 ........................................................... Euroclass C-s2, d0 EPS120 FIRE RETARDANT EXPANDED POLYSTYRENE BOARDS Field of use: Cutting thickness [mm]: As thermal insulation boards intended for: - average static load (flooring), low traffic terraces, under leveling concrete flooring - wood framing roofs, industrial roofing as subject to average mechanical stress - ETICS system facades (External thermal insulation composite systems) as per SR EN823 ... 20, 30, 40, 50, 60, 70, 80, 90, 100, 110, 120, 130, 140, 150, 160 +/- 2 mm T2 Technical characteristics: Board size length x width [mm]) .............................................. 1000 x 500 mm +/- 3 mm L2 x W2 Perpendicularity, as per SR EN 824 .................................................................. +/- 2mm /1 m S2 Evenness, as per SR EN 824 .................................................................................... +/- 5 mm P4 Bending resistance, as per SR EN 12089 ............................................................. BS200 BS≥200 Compressive stress at a 10%, deformation, as per SR EN 826 ……………....... CS10(120) CS≥120 Traction resistance, as per SR EN 1607 ................................................................ TR150 TR≥150 Thermal conductivity [W/m•K] .............................................................................................. 0,034 Adustion class, as per SR EN 13501-1 ............................................................. Euroclass B-s1, d0 17
  • 18. expanded polystyrene thermal insulation materials expanded polystyrene thermal insulation materials 18
  • 19. expanded polystyrene thermal insulation materials BASF is the worldwide leader in the chemical field: The Chemical Company. The German Group stands for a reliable partner of all industries and contributes to the increase of its partners’ success by supplying high quality products, smart solutions and innovative technologies. The BASF Group is represented in Romania by the BASF SRL company that was incorporated back in 1993. In 2012, BASF entered into a co-branding partnership with Adeplast company, under which the latter may use the Neopor® products in Romania, Hungary and the Republic of Moldavia. Under such co-branding agreement, all packaging Neopor® based graphitized expanded polystyrene shall be marked as “ Made of Neopor ® provided by BASF”, as a certification of the raw material that was used for manufacturing purposes and as a highlight on the chemical industry world leader partnership. BASF discovered more than 60 years ago a classic element, namely the expanded polystyrene, under the EPS abbreviation. Under the Styropor® brand, EPS stands even nowadays for the global solution to effective building thermal insulation or to product safe packaging. In 1995 BASF was awarded the invention patent for Neopor®. With this new product range, BASF carried on and improved the Styropor® product range performances. The new insulation material is expanded and processed as foam blocks, panels/boards and moulded components. As for Neopor®, graphite was also added to the raw material mix, which absorbs and reflects heat radiation and improves the EPS thermal insulation capacity by up to 20%. Neopor® is formed of small grey polystyrene granules (EPS) containing an expanding agent; this unique raw material is further on processed in thermal insulation materials intended for a wide range of applications. Neopor®-made thermal insulation materials provide an increased thermal insulation capacity and a raw material consumption of up to 50% lower than the conventional EPS.Thus, the products and environment- friendly and thus both resource and cost effective for the client. The Neopor® ecological materials contain air cells that guarantee the preservation of technical conductivity throughout the building’s operating life. Neopor ® granules (EPS) expanded polystyrene –made insulation materials are resistant to damage and aging as well as highly solid and stable size wise. Given such properties, the Neopor® systems provide long-term insulation and permanent safety. Prior to applying the exterior/outdoor insulation that is made of Neopor® insulating materials, you must check the sub- layer load resistance capacity. The wall must be dried while the existing plaster layer must be cavity-free and mobile part shall be removed. You must also first prepare the sandbased sub-layers or the layers having a larger absorption capacity. The Neopor® insulation boards are mounted on the brickwork by means of adhesives/glues, dowels or mounting stands. The boards shall be installed from the lower side towards the upper side so as to make sure that they are tightly fixed to one another and that they are combined into the brickwork (avoiding intersection points). The boards that are applied on all building corners must be joined under the dovetail shape. You must make sure that the surface is flat both horizontally and vertically. Slight imperfections may be corrected by applying an adhesive/glue while the edge prominences may be smoothed by abrasion. In order to avoid fissures and to mechanically protect the façade, it is necessary that both indoor and outdoor sides be reinforced. Such procedure is performed by means of a reinforcing material and an adequate reinforcing fabric. Once the exterior insulation has completely dried, you shall apply the protection exterior layer as final adequate plastering that must be compatible with the entire system. As compared to alternative available products, Neopor® provides cost-effective advantages that have a lower environmental impact, and also ecological solutions for a modern thermal protection. GRAFIPLAST with Neopor® is featured under two compression- resistant versions: - EPS80GR - EPS100GR Scope of use: as thermal insulation boards intended for: ventilated facades, ETICS system facades (External thermal insulation composite systems) Cutting thickness [mm]: as per SR EN823 the boards may be cut at 20, 30, 40, 50, 60, 70, 80, 90, 100,110, 120, 130, , 140, 150, 160 +/- 2 mm. expanded polystyrene thermal insulation materials ADEPLAST® - Neopor®: a long-term partnership 19
  • 20. expanded polystyrene thermal insulation materials expanded polystyrene thermal insulation materials EPS150 FIRE RETARDANT EXPANDED POLYSTYRENE BOARDS Field of use: Cutting thickness [mm]: As thermal insulation boards, for: - high static load spaces - walk-on terraces, under average traffic flooring as per SR EN823 ... 20, 30, 40, 50, 60, 70, 80, 90, 100, 110, 120, 130, 140, 150, 160 +/- 2 mm T2 Technical characteristics: Board size length x width [mm]) .............................................. 1000 x 500 mm +/- 3 mm L2 x W2 Perpendicularity, as per SR EN 824 .................................................................. +/- 2mm /1 m S2 Evenness, as per SR EN 824 .................................................................................... +/- 5 mm P4 Bending resistance, as per SR EN 12089 ............................................................. BS250 BS≥250 Compressive stress at a 10%, deformation, as per SR EN 826 ……………....... CS10(150) CS≥150 Traction resistance, as per SR EN 1607 ................................................................ TR150 TR≥150 Thermal conductivity [W/m•K] .............................................................................................. 0,033 Adustion class, as per SR EN 13501-1 ............................................................. Euroclass B-s3, d0 EPS200 FIRE RETARDANT EXPANDED POLYSTYRENE BOARDS Field of use: As thermal insulation boards, for: - highly increased static load spaces - walk-on terraces -under heavy and average traffic flooring - refrigerator rooms flooring Cutting thickness [mm]: as per SR EN823 ... 20, 30, 40, 50, 60, 70, 80, 90, 100, 110, 120, 130, 140, 150, 160 +/- 2 mm T2 Technical characteristics: Board size length x width [mm]) .............................................. 1000 x 500 mm +/- 3 mm L2 x W2 Perpendicularity, as per SR EN 824 .................................................................. +/- 2mm /1 m S2 Evenness, as per SR EN 824 .................................................................................... +/- 5 mm P4 Bending resistance, as per SR EN 12089 ............................................................. BS250 BS≥250 Compressive stress at a 10%, deformation, as per SR EN 826 ……………....... CS10(200) CS≥200 Traction resistance, as per SR EN 1607 ................................................................ TR150 TR≥150 Thermal conductivity [W/m•K] .............................................................................................. 0,032 Adustion class, as per SR EN 13501-1 ....................................................................... Euroclass E IPS INJECTED EXPANDED POLYSTYRENE PERIMETER BOARDS MW MINERAL WOOL / BASALT MINERAL WOOL Field of use: Intended for wall and flooring insulation against heated spaces adjacent to ground/soil. The boards are made by means of EPS- injecting machines. The surface on one side is provided with drainage striations under a rhomboid structure. Perimeter step rabbet (SF) guarantees a thermal bridge-free insulation. Competitive advantages: - extremely low water absorption, due to a very good juncture of expanded particles; - very good resistance due to high volumetric density; - 10 % better thermal insulation as compared to the regular expanded EPS boards. Board sizes [mm]: Perimeter thermal insulation board FF 30mm 1265 x 615 mm; 12,00 m² (0,360 m³)/Pack Perimeter thermal insulation board SF 40mm 1265 x 615 mm; 9,00 m² (0,3600 m³)/Pack Perimeter thermal insulation board SF 50mm 1265 x 615 mm; 7,50 m² (0,3750 m³)/Pack Cutting thickness [mm]: 30; 40; 50 mm Field of use: Mineral wool has been used in the building industry for over 60 years and has proved to be a safe, efficient and accessible insulation method. The wool insulation is of high performance and provides noise and fire protection as well as advantages such as power savings, and thus has all the insulation and mechanical relevant characteristics. The excellent thermal insulation properties allow for the reduction of home heating or chilling costs. Since it is made of natural materials-sand, gross side materials – broken glass – it helps reduce the power consumption and the atmosphere-released pollution emission, but also reduce the weight on the base structure. The product resistance allows for an increased material compression and guarantees that the product resumes its declared thickness, thus transportation, storage and warehousing costs are significantly reduced. Characteristics: Mineral wool mattress featured as material rolls, thickness: from 50 mm, length: 10 m. - thermal conductivity: λ = 0,040 W/mK - fire resistance class A1 Basalt mineral wool board featured as rigid boards, thickness: from 20 - 200 mm, density 140 - 180 kg / m³. - thermal conductivity: λ = 0,035 W/mK - quality standard: SR EN 13162/2003 20
  • 21. expanded polystyrene thermal insulation materials EXPANDED POLYSTYRENE ADDITIVE-FREE VIRGIN BEADS Field of use: - flooring and foundation sub-layers, spaces between floorings, roofs and wood flooring - single layer screeds for direct gluing of flooring materials, foundations and floorings, spaces between the floorings, roofs and wood flooring - to form biases on flat terraces and roofs, also with direct subsequent application of waterproofing coverings (precast: synthetic and hot or cold bituminous fluids, provided these are solvent-free) - insulation of non walk-on bridges -Insulation of tarred roofs, also with subsequent direct application of waterproofing coverings (precast: synthetic and hot or cold bituminous fluids, provided these are solvent-free) - arch filling, also for the very thick ones - roof coverings by means of asbestos-content cement boards, also with subsequent direct application of waterproofing coverings (precast: synthetic and hot or cold bituminous fluids, provided these are solvent-free) - filling under the asphalt covering - sub-layers for industrial flooring Specific consumption: in order to obtain 0,3 m³ of light concrete blanket/screed, with an apparent dry state density of 350 - 450 kg/ m³, please observe the following instructions: - 1 bag of 250 liters virgin beads + 40 - 50 liters of water + 100 kg of cement P-BLU POLITERM BLU – E.I.A ADDITIVATED EXPANDED POLYSTYRENE BEADS Field of use: - - - - - - - - - - flooring and foundation sub-layers, spaces between floorings, roofs and wood flooring single layer screeds for direct gluing of flooring materials, foundations and floorings, spaces between the floorings, roofs and wood flooring (Please see the “Politerm Blu– Piano Zero” User’s Manual) - to form biases on flat terraces and roofs, also with direct subsequent application of waterproofing coverings (precast: synthetic and hot or cold bituminous fluids, provided these are solvent-free) - insulation of non walk-on bridges - insulation of tarred roofs, also with subsequent direct application of waterproofing coverings (precast: synthetic and hot or cold bituminous fluids, provided these are solvent-free) - arch filling, also for the very thick ones - roof coverings by means of asbestos-content cement boards, also with subsequent direct application of waterproofing coverings (precast: synthetic and hot or cold bituminous fluids, provided these are solvent-free) - filling under the asphalt covering - sub-layers for industrial flooring - 3 to 6 mm granulation expanded polystyrene thermal insulation materials EPS-PV Specific consumption: in order to obtain 0,3 m³ of light blanket, please follow the instructions below: - 2 bags of 420 liters Politerm Blu + water + cement (*) - 5 bags of 170 liters Politerm Blu + water+ cement (*) (*) see prescribed dosage P-BLU FEIN POLITERM BLU FEIN - E.I.A ADDITIVATED EXPANDED POLYSTYRENE BEADS Field of use: - - - - - - - - Improved compression resistance - flooring and foundation sub-layers, spaces between floorings, roofs and wood flooring single layer screeds for direct gluing of flooring materials, foundations and floorings, spaces between the floorings, roofs and wood flooring - to form biases on flat terraces and roofs, also with direct subsequent application of waterproofing coverings (precast: synthetic and hot or cold bituminous fluids, provided these are solvent-free) - insulation of non walk-on bridges - insulation of tarred roofs, also with subsequent direct application of waterproofing coverings (precast: synthetic and hot or cold bituminous fluids, provided these are solvent-free) - arch filling, also for the very thick ones - roof coverings by means of asbestos-content cement boards, also with subsequent direct application of waterproofing coverings (precast: synthetic and hot or cold bituminous fluids, provided these are solvent-free) - filling under the asphalt covering - sub-layers for industrial flooring - 2mm granulation Specific consumption: in order to obtain 0,3 m³ of light blanket, please follow the instructions below: - 2 bags of 420 liters Politerm Blu + water + cement (*) - 5 bags of 170 liters Politerm Blu + water+ cement (*) (*) see prescribed dosage 21
  • 22. expanded polystyrene thermal insulation materials expanded polystyrene thermal insulation materials 22 POLITERM BLU: EXTRA-LIGHT CONCRETES Extra-light aggregates for thermal insulation mortar preparation MIXING PROCESS STEPS Main instructions Mixing drum preparation In order to obtain 200 liters of finished product 1. water (*); 2. Politerm Blu or Politerm Blu Fein (1 bag of 170 lt); 3. cement (*); 4. mix for 5 minutes by keeping the rotary mixing drum as horizontally as possible; 5. mixing drum emptying Politerm installation mixing In order to obtain 1 m3 of finished product: 1. water (*) ; 2. first bag of 420 liters Politerm Blu or Politerm Blu Fein; 3. cement (*) ; 4. second bag of 420 liters Politerm Blu or Politerm Blu Fein; 5. keep mixing for 5 minutes; 6. then pump Agitating truck preparation 1. water: as per recipe ( * ) less 20 - 30 liters (point 6) 2. Politerm Blu or Politerm Blu Fein; 3 mix for about 10 minutes at maximum speed 4. cement (*) ; 5. mix for about 10 minutes at maximum speed 6. clean the feeding hopper with approx. 20-30 liters of water (which supplements the required water quantity) 7. On the route from the concrete station to the site, the agitating truck shall mix for 20 minutes at maximum speed and then at minimum speed.
  • 23. expanded polystyrene thermal insulation materials APPLICATIONS AND PRODUCTS 2 2 1 1 Acrylic primer for self-leveling floor screed 3 3 5 5 4 4 6 6 7 7 10 10 8 8 9 9 TOP2 Indoor or outdoor cement floor blanket 11 11 foundation basement Thermal insulation floor blankets-one layer - Direct application: • Ceramic plates, stone, clinker and polished marble flooring, 5 parquet-covered floating flooring. • Parquet- after the application of a thin layer of light blanket/screed. 8 • Flexible flooring (moquette, PVC...), After the application of a thin layer of light blanket /screed. 8 Also for: • Terrace slope blankets/screeds 4 TOP1 Indoor or outdoor cement floor blanket Building elements* 7 • Bricks: • Cast Walls: 10 Intermediary layer filling • leveling; 11 • under the sand + cement blankets; 8 • under self-leveling blankets; • under floor heating 8 (also with direct application of the heating pipe); 6 • arch leveling; 9 • under industrial flooring; • under asphalt layer • between walls 3 expanded polystyrene thermal insulation materials Complementary products 1 Roofing • sloped roofing; • flat roofs, with or without slopes; • arched roofs; • profile sheet roofing; • asbestos-cement sheet roofing sealing; • direct application of waterproofing membranes 2 * Mainly for compartmenting elements (which are not resistance structures). The project designer is in charge with the resistance calculations pursuant to local standards. FAST SELF-LEVELING CEMENT BASED SCREED 2-10mm SELF-LEVELING CEMENT-BASED SCREED 2-10 mm 23
  • 24. adhesives for plating adhesives for plating KITS FOR JOINTING QK-6 QK-6 QUARZ KIT 2 - 6 mm FLEXIBLE, AQUA-STATIC KIT FOR JOINTING CERAMIC PLATES 2 - 6 mm Application: el ickred dar kb rick -re d cho col ate lig ht - ye llo w ye llo w sil ve rg rey ram ligh t br mel k ca dar cara beig ligh t antic lue dark b blue white e Consumption [kg/m²]: Packaging: filling joints with maximum width of 2-6 mm for ceramic tiles, marble, natural stone (except aged one), granite and porcelain tiles for interior or exterior work, exposed to temperatures between -20 ° C and +80 ° C in wet or dry environments. Tiles size (cm) 15 x 15 20 x 20 20 x 30 30 x 30 40 x 40 50 x 50 Joint of 1 mm thick 0,15 0,13 0,12 0,10 0,05 0,04 Joint of 3 mm thick 0,45 0,39 0,36 0,3 0,15 0,12 Joint of 5 mm thick 0,75 0,65 0,6 0,5 0,25 0,2 1. Individual Package of 2 kg and 5 kg - polyethylene package laminated in three layers, with vapour barrier and ultraviolet light filter - the total thickness of the polyethylene layer is at least 0.12 mm - shelf life of the product in the original package, unopened 2 YEARS! 2. Cart-board box package that contains: - 5 bags of 5 kg - 12 bags of 2 kg 3. Euro-pallet wrapped with 28 boxes: -28 boxes x 5 bags x 5 kg = 700 kg -28 boxes x 12 bags x 2 kg = 672 kg t igh ey gr l d ark y gre p rey lg o etr n row lig b ht k dar wn bro ck bla n ocea e ochr olive polar retro red pink terracotta Color Pallet QK-6 30 shades 24 QUARZ KIT 2 - 6 mm green g50 green g57 violet
  • 25. adhesives for plating adhesives for plating very high flexibility high resistance to traffic low water absorption high resistance to cracking The transparent area of the package shows the original color of the premixed QK-6 or QK-15 used for finishing joints tiles. QK-15 QUARZ KIT 5 - 15 mm FLEXIBILE, AQUA-STATIC QK-15 KIT FOR JOINTING CERAMIC TILES 5 - 15 mm Application: filling the joints with maximum width between 5-15 mm, of ceramic tiles, tiles, marble, natural stone (except old ones), granite, porcelain tiles, for interior or exterior work, exposed to temperatures between -20 ° C and +80 ° C in wet or dry environments. Consumption: between 0.8 to 1.5 kg / m², depending on the size of the plates and of the joints. For correct calculation of the specific consumption necessary tests are needed at the application site, on a small area. Packaging: 1. Individual package of 5 kg - laminated polyethylene package, in three layers with vapour barrier and ultraviolet light filter. - the total thickness of the polyethylene layer is at least 0.12 mm - shelf life of the product in the original package, unopened 2 YEARS! 2. Cart-board box package that contains: - 5 bags of 5 kg 3. Euro-pallet wrapped with 28 boxes: - 28 boxes x 5 bags x 5 kg = 700 kg ligh col dark t gr ey ate ite ram wh ige be ca cho el grey brown black ocean polar otta c terra en gre Color Pallet QK-15 12 shades QUARZ KIT 5 - 15 mm 25
  • 26. thermal insulation system adhesives/glues thermal insulation system adhesives/glues THERMAL INSULATION SYSTEMS – ADHESIVES/GLUES, SPATULA MASS Adhesive/glue and spatula mass placing guide for thermal insulation system application. 1 2 4 3 5 6 SUPPORT SURFACE: The support surface must be clean, rigid, without detached parts and well hardened; it must also be at least 28 days old. The surface must be checked by hammer in order to see if it presents sufficient plating resistance. NECESSARY TOOLS: - bucket – mechanic or manual mixer; - trowel; - teethed grouter 6 x 6 mm, to 12 x 12 mm; - level instrument PREPARATION AND PLACING METHOD: Put the powder into water and begin mixing. Both the container and the water must be clean. It is recommended that you mix at one time a quantity that will be used within one hour. Mix energetically and preferably mechanically (attach a blade shaft to the electric boring mill) in order to obtain a creamy, homogeneous, easily processable mix, with an adequate fluidity. If you ad an insufficient water quantity, the product may loose its adhesive properties. Wait for 10 minutes to allow chemical reactions to take place and then resume firm mixing. For flat, plastered surfaces, the adhesive/glue shall be placed on the entire polystyrene board surface, by using a 10-12 mm teethed grouter then press the board onto the insulation surface. For subsidence surface, the paste shall be placed onto the polystyrene board as spots at approximately equal distances of 15 to 20 cm and on the edge as a broad stripe of 3 to 4 cm, so as to ensure at least 40-50% covering out of the entire polystyrene board surface (check periodically). The polystyrene board is then pressed onto the insulation surface. The final straight surface is obtained by pressing several boards onto the surface by means of wood or metal long straight edge. The mineral wool rigid board shall be placed on the surface by means of an 8x8 mm to 12x12mm teethed grouter. The paste is placed on the support surface in a 4 to 5 mm layer, then rake by using the teethed grouter. The paste thus placed on the support shall keep its adhesive properties for at least 20 minutes. The paste adhesive capacity is checked by touching the surface with the fingers of the aloof hand. The paste sticking to the fingers stands for an adequate adhesiveness. 24 hours after placement, the thermal and noise insulating boards must be dowelled by 4- 6 dowels/ m², and then the same adhesive must be placed on the polystyrene board or on the rigid mineral fiber board by using a 6 x 6 mm up to 10 x 10 mm teethed grouter. Starting from the top side of the surface, roll a glass fiber net provided with 5 x 5 mm up to 10x 10 mm meshes and then press on the formed stripes. Use the right side of the grouter to uniformly insert inside the adhesive/glue. The net rows shall be lapped over on portions of at least 10 cm; in case of window and door corners you must provide additional reinforcing by means of reinforcing net stripes of at least 20 cm length and width. It is recommended to use an anti-alkali treated reinforcing net weighing at least 145 g/m². The thus obtained surface shall be finished also by using the polystyrene adhesive/glue until you obtain a flat surface that is ready for decorative products application. CAUTION: IN CASE OF HIGHLY ABSORBENT SURFACES, SUCH AS BCA, OLD OR NEW BUT HIGHLY ABSORBENT BRICK, etc, PRIOR TO POLISTIROL GLUING YOU MUST PRIME THE SURFACE BY MEANS OF A CEMENT SPRAY AND THEN LET IT DRY FOR ABOUT 2 HOURS. SURFACE BECOMES USABLE: The surface may be covered or finished at least 72 hours later, with all organic solvent-free known materials. It is recommended that you use expanded and extruded polystyrene for insulation purposes and to cover with decorative structured plasters of the ADEPLAST® COLOR SYSTEM product range, as final finishing layer. 1. corner board mounting. 2. dowel fixing. 3. corner dowelling. 4. corner reinforcement (net profile). 5. spatula procedure (net embedment in the spatula mass) 6. net overlapping procedure 7. window and door additional reinforce- 7 PSP POLISTIROL PREMIUM – POLYSTYRENE INTENDED ADHESIVE/GLUE AND SPATULA MASS Scope of use: Specific consumption: 26 For thermal and noise insulation works by means of expanded and extruded polystyrene for facades, as well as for polystyrene or rigid polyurethane ornaments gluing, for indoor or outdoor purposes. ONLY APPLY ON MINERAL SUPPORTS. DO NOT APPLY ON WOODEN, PLASTIC, METAL, etc SUPPORTS. board gluing: 2,5 - 3,5 kg/m² board covering: 2,5 - 3,9 kg/m² - 6x6 grouter 3,9 - 5,5 kg/m² - 8x8 grouter Product code: Packaging: Pallet Stand: Quality Standard: psp bags of 25 kg 48 bags/pallet 1200 kg SR EN 1015-12:2002
  • 27. thermal insulation system adhesives/glues POLISTIROL PREMIUM WHITE – POLYSTYRENE ADHESIVE/GLUE AND SPATULA MASS Scope of use: Specific consumption: PS-ECO For thermal and noise insulation works by means of extruded and expanded polystyrene for facades, as well as for polystyrene or rigid polyurethane ornament gluing, for indoor or outdoor purposes. APPLY ONLY ON MINERAL SUPPORTS. DO NOT APPLY ON WOOD, PLASTIC OR METAL, etc SUPPORTS. board gluing: 2,5 - 3,5 kg/m². board covering: 2,5 - 3,9 kg/m² - 6x6 grouter 3,9 - 5,5 kg/m² - 8x8 grouter Scope of use: For thermal and noise insulation works, only for expanded polystyrene gluing, for indoor or outdoor purposes, on mineral supports (cement-lime plasters, brick, concrete). board gluing: 2,5 - 3,5 kg/m². Scope of use: For expanded and extruded façade intended polystyrene covering (by means of spatula), for both indoor and outdoor works. By using the ADEPLAST REINFORCING FIBER POLISTIROL product, you shall obtain highly flexible surfaces with an increased adherence of the glass fiber net to the polystyrene board. ps-eco bag of 23 kg 48 bags/pallet 1104 kg SR EN 1015-12:2002 board covering: 2,5 - 3,5 kg/m² - 6x6 grouter 3,5 - 4,5 kg/m² - 8x8 grouter Product code: Packaging: Pallet Stand: Quality Standard: ps-fa bag of 25 kg 48 bags/pallet 1200 kg SR EN 1015-12:2002 EXPANDED POLYSTYRENE ADHESIVE/GLUE FOR WOODEN SUPPORT APPLICATION Scope of use: Specific consumption: MW-KLEBER Product code: Packaging: Pallet Stand: Quality Standard: SUPER POLISTIROL – REINFORCING FIBERS ADHESIVE/GLUE AND SPATULA MASS Specific consumption: OSB-KLEBER psp-alb bag of 25 kg 48 bags/pallet1200 kg SR EN 1015-12:2002 POLISTIROL €CO – EXPANDED POLYSTYRENE ADHESIVE/GLUE Specific consumption: PS-FA Product code: Packaging: Pallet Stand: Quality Standard: thermal insulation system adhesives/ PSP WHITE For thermal and noise insulation by means of façade intended expanded and extruded polystyrene, both indoors and outdoors, on OSB supports, as well as for thermal insulation works in extreme weather areas, where the day-night and winter-summer temperature variations are really high. O.S.B. KLEBER may also be delivered as paste version. This may be used also for ceramic plates gluing to wooden support. board gluing: 2,5 - 3,5 kg/m². board covering: 2,5 - 3,9 kg/m² - 6x6 grouter 3,9 - 5,5 kg/m² - 8x8 grouter Product code: Packaging: Pallet Stand: Quality Standard: osbk bag of 25 kg 48 bags/pallet 1200 kg SR EN 1015-12:2002 Product code: SAAP0 Packaging: bucket of 25 kg Pallet Stand: 24 buckets/pallet 600 kg Technical Approval: product approved by INCERC s.a. MINERALWOOL KLEBER – BASALT MINERAL WOOL ADHESIVE/GLUE Scope of use: Specific consumption: For thermal and noise insulation works by means of basalt mineral wool mattresses, for indoor or outdoor purposes. ONLY APPLY ON MINERAL SUPPORTS. DO NOT APPLY ON WOOD, PLASTIC, METAL or similar supports. 2,5 - 3,9 kg/m² - 6x6 grouter 3,9 - 5,5 kg/m² - 8x8 grouter Product code: Packaging: Pallet Stand: Quality Standard: mw-kleber bag of 25 kg 48 bags/pallet 1200 kg SR EN 1015-12:2002 27
  • 28. drainage products – RENOWA range drainage products- RENOWA range Intended for the RENOWA DRAINAGE SYSTEM Intended for his- rehabilitation of torical monuments salts and humidand buildings therity-affected mal restoration and brickworks drainage RENOWA Drainage procedure The drainage procedure implies rehabilitation of the building sections having been affected by salt, humidity and fissures, as a consequence to brickwork mortar degradation. By using the RENOWA drainage system materials, you shall obtain a long-lasting, high quality finish. The RENOWA system composing products performance implied the use of special raw materials, such as salt and sulphate resistant cement, special hydrophobization agents, additives intended for the creation of mortar pores of less than 30 microns, etc. RENOWA system advantages 28 • Salt elimination without using chemical products • All products within the system are perfectly compatible • System is verified, with time efficiency specification (at least 20 years) • Very good adherence for each layer • System may be applied both manually and mechanically • Product high exploitability level in both cases • System products are tested within company’s own laboratory • Controlled quality products • Intended for both indoor and outdoor purposes • Water repellent mineral plasters and paints with high vapor diffusion capacity • High quality finishes resulting in extremely smooth surfaces • Also recommended for the foundation areas restoration • AEROQ certified system, pursuant to European standards
  • 29. drainage products- RENOWA range SAGTC ROUGH COAT FOR DECORATIVE PLASTERS Specific consumption: SIT Packaging: Pallet Stand: Quality standard: RW-W Intended for the priming of all plaster covered surfaces (lime smoothed plasters, lime-cement, cement, spatula mass), gypsum board, painted (or with decorative plasters), new or old but well adherent, for both indoor and outdoor purposes, as a layer preceding the finishing of silicone and styrene-acrylic plasters for foundation and thermal systems. SILICONE DECOPLAST – STRUCTURED DECORATIVE PLASTER Scope of use: Intended for impressive decorative coverings and finishes, for both indoor and outdoor works. The products may be applied on any type of mineral supports: plaster, polishing plaster coats, concrete, brickworks, gypsum boards, etc. Professional quality, easy application, single layer. Coloring: The product is delivered already colored by the manufacturer depending on the beneficiary’s option, and based on the ADEPLAST® color pallette, or it may be delivered in white and then later on shaded upon application by means of coloring pastes. Specific consumption: - Smoothed plaster: 1,5 mm - 2,5 kg/m² - Scuffed plaster: 2,0 mm - 2,8 kg/m² Instructed consumption refers to perfectly flat surfaces and varies depending on the layer thickness and the support surface characteristics. This is why our company takes no responsibility regarding the 28 kg bucket. material requirements for each case in particular. 24 buckets/ 672 kg pallet. * please see page 9 for product codes and details. SR EN 15824:2009. RENOWA-W PLASTER MORTAR FOR OLD BUILDINGS DRAINAGE Scope of use: Drainage plaster mortar for brickwork leveling, under manual or mechanical application. Extremely good adherence; ensures desalinization and dehumidification of salt and humidity-attacked structures. One layer thickness: 2 cm. approx.10,0 kg/m² at 10 mm applied layer thickness Product code: Packaging: Pallet Stand: Quality Standard: RW-W bag of 30 kg 42 bag/pallet 1260 kg SR EN 998-1:2011 5 94576 2 003768 RENOWA-L PLASTER MORTAR FOR DRAINAGE AND LEVELING Scope of use: Drainage plaster mortar for brickwork leveling, as support layer for the RENOWA-W mortar, under both manual and mechanical application. Very god adherence; salt shrinkage high capacity and water vapor permeable. One layer thickness: 2 cm. Specific consumption: RW-SPZ 5 94576 2 003423 Approx.150 - 350g/m² (1kg / 3 - 6 m², depending on the treated support roughness) Specific consumption: RW-L Product code: SAGTC Packaging: bucket 24 kg Pallet Stand: 24 buckets/pallet 550 kg Technical Approval: product approved by INCERC s.a. drainage products – RENOWA range Scope of use: approx. 10,0 kg/m² at 10 mm applied layer thickness. Product code: Packaging: Pallet Stand: Quality Standard: RW-L bag of 30 kg 42 bag/pallet 1260 kg SR EN 998-1:2011 5 94576 2 003751 RENOWA SPRITZ CEMENT DROP Scope of use: Specific consumption: Drainage systems intended cement drop; sulphate-resistant; provides brickwork salts transportation to the next plaster layers in the drainage system; manual application. approx. 3,0 - 5,0 kg/m². Product code: Packaging: Pallet Stand: Quality Standard: RW-SPZ bag of 30 kg 42 bag/pallet 1260 kg SR EN 998-1:2011 29
  • 30. Brickwork mortars Brickwork mortars BRICKWORK MORTARS Glass brick mortar placement guide PREPARATION METHOD: Mix one 25 kg bag with approximately 4,75 - 5,5 liters of water. Put the powder into the water and then mix vigorously, preferably mechanically, until you obtain a creamy, homogenous and easily exploitable mixture. It is recommended to mix at one time a quantity that may be used within 2 hours maximum. Wait for 10 minutes in order to allow chemical reactions to take place then resume vigorous mixing. The mixing drum mixing time is 5 to 10 minutes. 30 REQUIRED TOOLS: - bucket - manual or mechanic mixer - trowel - cross-type spacers PLACEMENT METHOD: The material shall be dispersed over the free edges of the glass brick; place a 5-10 mm spacer between the bricks in order to get uniform joints. If the glass brick geometry so allows, also insert a steel wire armature at each brick row. Upon finishing each layer, clean the mortar excess off the bricks. 72 hours later you may perform jointing also using the ADEPLAST® MZ /GLASS glass brick mortar. If you intend to obtain an extra finished surface, use the ADEPLAST® GU or ADEPLAST® SGC cement polishing plaster coat (super cement polishing plaster coat) for finishing purposes. The adhesive mortar for glass brick walling- ADEPLAST® MZ-GLASS – simplifies bricking, considerably reduces material consumption and drastically reduces work time. The cutback on the mortar layer thickness also results in the heat loss reduction!
  • 31. Brickwork mortars MZ-BCA BCA BLOCKS WALLING MORTAR BCA size / Consumption in kg / m² of BCA / Square meters that may be built on 1 bag - 25 kg NUT and FEDER - 60x20x25 approx. 3,8 kg approx. 6,5 m² NUT and FEDER - 60x30x25 approx. 5,7 kg approx 4,3 m² Regular BCA - 60x20x25 approx 6,3 kg approx. 3,9 m² Regular BCA - 60x30x25 approx 9,5 kg approx. 2,6 m² Scope of use: Intended for concrete, brick or light concrete blocks walling. approx 1,5 - 1,8 kg/m², at a 1 mm layer thickness; Approx. 156 kg of dried mortar for 1 cubic meter of hole brick Scope of use: Intended for glass brick walling. To be used at temperatures exceeding +5°C. 1 ADEPLAST mortar bag for glass brick walling is enough for a 3,5 m² glass wall with joints of an average 10 mm thickness. mz5 bag of 30 kg 42 bag/pallet 1260 kg SR EN 998-2:2011 Product code: Packaging: Pallet Stand:: Quality Standard:: mz-sticla bag of 25 kg 48 bag/pallet 1200 kg SR EN 998-2:2011 Product code: Packaging: Pallet Stand:: Quality Standard:: mzsticla-alb bag of 25 kg 48 bag/pallet 1200 kg SR EN 998-2:2011 Product code: Packaging: Pallet Stand:: Quality Standard:: beton-fix bag of 30 kg 42 bag/pallet 1260 kg SR EN 1504-6:2007 GLASS BRICK WALLING WHITE MORTAR Scope of use: Intended for glass brick walls bricking. To be used at temperatures exceeding +5°C. Specific consumption: BETON-FIX Product code: Packaging: Pallet Stand:: Quality Standard:: GLASS BRICKS WALLING MORTAR Specific consumption: MZ-STICLA ALB mzbca bag of 25 kg 48 bag/pallet 1200 kg SR EN 998-2:2011 CONCRETE AND BRICK BLOCKS WALLING MORTAR Specific consumption: MZ-STICLA Product code: Packaging: Pallet Stand:: Quality Standard:: Brickwork mortars Intended for BCA blocks and light concrete blocks. Specific consumption: MZ-5 Scope of use: 1 ADEPLAST glass brick walling is enough for a 3,5 m² glass wall, with joints of an average 10 mm thickness. MONOLITHIZATION SPECIAL MORTAR Scope of use: Specific consumption: –for machine foundation anchorage, metal and concrete poles -for filling, leveling and sub-casting for concrete poles and beams -for the anchorage of support parts for metal structures, machines, etc. - for the anchorage of structure metal elements - sub-casting works performance approx. 1,9 - 2,0 kg / filled cavity liter 31
  • 32. Brickwork mortars Brickwork mortars BETONFIX – ADEPLAST monolithization solution Compensated contractions monolithization-intended special fluid mortar. Structure metal elements anchorage Support parts anchorage for metal structures, machines, etc. Sub-casting work performance TECHNICAL DATA: - color: grey - granulation: 4,0 mm maximum - composition: cement, sand, special additives - water requirement: 12% (normal consistency)-13% (fluid consistency); be tween 3.6-3.9 liters / 30 kg bag) - intended for: sub-casting and fixing, up to 60mm thickness, no contractions. This product type may be used for machine foundation anchorage, for metal and concrete poles, for filling, leveling and sub-casting of poles and concrete beams, for support parts anchorage for metal structures, machines, structure metal elements or for the sub-casting works performance. The product preparation is carried out by inserting the powder into the water and by mixing. Both the container and the water must be clean. Mixing shall be performed at low speed and preferably mechanically, in order to avoid excessive air, until you obtain a homogenous, fluid, easily exploitable mix that is clog and agglomeration- free. 32 The product is packaged as 30kg bags, with a specific consumption of 1,9 - 2,0 kg/filled cavity liter. The specific consumption is of approximately 1.9-2.0 kg/filled cavity liter, the layers’ thickness goes up to 600 mm. Product applicability subsequently to water mixing is of approximately 30 minutes, at an environmental temperature of +5°C to +30°C. The support surface must be load-bearing, hardened and at least 28 days old, clean, dust-free, adherent and compact, dried and with no fissures, cracks, greases, friable debris, salts. Cast the resulting mix on one side of the cavity to be filled, under continuous flow, in order to allow the air to exit the mix. After casting, the mortar shall be protected against water evaporation, by spraying water over the cast surface within the first 24 hours from casting.
  • 33. Brickwork mortars Brickwork mortars 33
  • 34. Gypsum board system Gypsum board system GYPSUM BOARD SYSTEM – ADHESIVE/GLUE, JOINT FILLER, POLISHING PLASTER COAT Gypsum boards joint filler placement guide 34 SUPPORT SURFACE: The product shall be applied on clean, grease-free, dust-free and impurities-free gypsum boards (plaster boards). In case of size cut boards, deepen the joint as in a V-shape by acclive cutting the boards. WATER MIXING APPLICABILITY: - for 1 hour REQUIRED TOOLS: - bucket - manual or mechanical mixer - spatula TOOL CLEANING: - with water, prior to hardening ENVIRONMENTAL TEMPERATURE: - between +5°C and +30°C. Avoid working under direct sun light. PLACEMENT AND PREPARATION METHOD: Insert the powder into the water. Let it rest for 2-3 minutes for maceration purposes, and then mix vigorously and mechanically, preferably (attach a blade shaft to an electric boring mill). Keep mixing until you obtain a very creamy, easily exploitable, homogenous mix that is clog-free. The thus obtained mix is then inserted into the joints and then covered with a glass fiber stripe that is then covered with another joint adhesive/glue layer for gypsum. The adhesive/glue surface is smoothed by means of a grouter so as to obtain uniform surface for the entire board. Besides the recommendations above, it is important that all effective norms and standards be complied with. Guaranteed characteristics are based on practical experience and performed tests. Location and application specific conditions may differ from those presented herein; thus, a correct and successful use of our products is not included in our responsibility scope.
  • 35. Gypsum board system GIPSCARTON FIX – GYPSUM BOARD GLUING ADHESIVE Scope of use: Specific consumption: KGC-50 Intended for the gluing of gypsum boards on mineral support. The support surface may be concrete, brick, voussoirs, BCA, ceramic blocks, mechanically resistant plaster, etc. ONLY APPLY ON MINERAL SUPPORTS. DO NOT APPLY ON WOODEN, PLASTIC, METAL or similar supports. 5kg/m2 depending on the support surface specific conditions agc bag of 25 kg 48 bag/pallet 1200 kg SR EN 12860:2003 Product code: Packaging: Pallet Stand Produkt Standard: kgc20 bag of 20 kg 48 bag/pallet 960 kg SR EN 12860:2003 Product code: Packaging: Pallet Stand Produkt Standard: kgc3x5 cutie de 3 x 5 kg 32 cutii/pallet 480 kg SR EN 12860:2003 GYPSUM BOARD JOINTING FILLER KIT Scope of use: Specific consumption: Intended for indoor works, for gypsum board joint filling by means of reinforcing glass fiber stripes. ONLY APPLY ON MINERAL SUPPORTS. DO NOT APPLY ON WOODEN, PLASTIC, METAL or similar supports. 5 - 10 m filler / kg. Product code: Packaging: Pallet Stand Produkt Standard: GLET-FIX Product code: Packaging: Pallet Stand Produkt Standard: Gypsum board system AGC kgc05 pungă de 5 kg 96 png./pallet 480 kg SR EN 12860:2003 POLISHING PLASTER COAT COMPOSITION FOR GYPSUM BOARDS COATING Scope of use: Specific consumption: Intended for gypsum board surfaces finishing inside housing buildings, in order to obtain extremely fine and smooth surfaces, which may then be covered basically with any paint type. ONLY APPLY ON MINERAL SUPPORTS. DO NOT APPLY ON WOODEN, PLASTIC, METAL or similar supports. Product code: Packaging: Pallet Stand Produkt Standard: gletfix bag of 20 kg 48 bag/pallet 960 kg SR EN 12860:2003 approx. 0,5 kg/m². 35
  • 36. Floor screeds, industrial flooring Floor screeds, industrial flooring FLOOR SCREEDS AND INDUSTRIAL FLOORING Self-levelling floor screed placement guide SUPPORT SURFACE: The support surface must be hardened and at least 28 days old, clean, dried, fissure and crack-free, adherent and compact, grease-free; it must not have any chemical adhesive debris left from existing covering removal, no friable debris, no salts, with a minimum 150 mark. The surface must be dusted, mechanically and chemically cleaned (if applicable) until you obtain a load-bearing layer that is perfectly adherent and clean. The next step is to cast an ADEPLAST® ACRYLIC PRIMER layer that connects the concrete layer to the self-leveling screed and uniforms the sub-layer absorption level. In case of completely non-adherent surfaces (such as old floor tiles, mosaic, shiny smoothed cement, etc), previously apply a two-component epoxy primer in order to create a connection bridge between the sub-layer and the self-leveling floor creed (please consult with the epoxy products manufacturers). REQUIRED TOOLS: - bucket – mechanic or manual mixer - trowel; - rubber pin roller - leveling board PLACEMENT AND PREPARATION METHOD: Insert the powder into the water and begin mixing. Both the container and the water must be clean. Mix carefully and mechanically, preferably (attach a blade shaft to an electric boring mill and mix at low speed) so as to prevent air bubbles to form inside the mix, until you obtain a creamy, homogenous and easily exploitable product. Wait for 10 minutes in order for the chemical reactions to take place. The self-leveling screed is then cast on the surface to be leveled at the consistency of a fluid sour cream; then level over the surface by using a trowel. No water mirror must be formed on the cast screed surface. All possible air bubbles must be eliminated from the screed surface, by means of a rubber pin roller; then level the surface by means of a broad leveling board. SURFACE BECOMES USABLE: After no less than 24 hours, for floor tile covering. After no less than 72 hours for parquet or moquette placing. The hardening time is extended at temperatures below 20°C. SPECIAL RECOMMENDATIONS: - do not use for heavy walk-on traffic flooring (industrial facilities) - in case the product is to be applied over the floor heating system, cut the heating at least 24 hours before placement and restart the system only after final hardening. - in case of large surfaces, allow for dilation joints ( at distances of 4 to 7 m). - avoid self-leveling screed casting when the night temperature may drop under +5°C. SA 2-10 2-10mm INDOOR SELF-LEVELING FLOOR SCREED Intended for the leveling of inside surfaces of cement screeds and of concrete surfaces, etc., to the purpose of warm covering (linoleum, PVC slab) and moquette, parquet, floor tile covering, warehouse or basement final layer, etc. Specific consumption: SAR 2-10 Scope of use: approx. 1,6 - 1,8 kg/m² at 1 mm applied layer thickness sa210 bag of 25 kg 48 bag/pallet 1200 kg SR EN 13813:2003 2-10mm FAST INDOOR SELF-LEVELING FLOOR SCREED Scope of use: Specific consumption: 36 Product code: Packaging: Pallet Stand: Produkt Standard: Intended for the leveling of inside surfaces of cement screeds, of concrete surfaces, etc, to the purpose of warm covering (linoleum, PVC slabs), moquette, parquet, floor tile covering, where walk-on traffic is required 3 hours after screed casting. Product code: Packaging: Pallet Stand: Produkt Standard: approx. 1,5 - 1,8 kg/m² at 1 mm applied layer thickness. sa210-r bag of 25 kg 48 bag/pallet 1200 kg SR EN 13813:2003
  • 37. Floor screeds, industrial flooring TOP 1 INDOOR AND OUTDOOR CEMENT SCREED FOR HEAVY WALK-ON TRAFFIC approx. 1,8 - 1,9 kg/m² at 1 mm applied layer thickness. Scope of use: Intended for the leveling of indoor and outdoor cement screeds and of concrete surfaces, etc, to the purpose of warm covering (linoleum, PVC slabs), moquette, parquet and floor tile covering, for swimming pool bottom covering prior to painting, as final layer for housing facilities, basements, etc. approx. 1,8 - 1,9 kg/m² at 1 mm applied layer thickness. Scope of use: Intended for repair works or reduced space concreting, for garden and house slight improvements, where small quantities are required of this type of product. top2 bag of 30 kg 42 bag/pallet 1260 kg SR EN 13813:2003 Product code: Packaging: Pallet Stand: Produkt Standard: hb-cg bag of 30 kg 42 bag/pallet 1260 kg 007-01/172-2009 Product code: Packaging: Pallet Stand: Produkt Standard: nsp01 bag of 25kg 48 bag/pallet 1200 kg SR EN 13139:2003 Product code: Packaging: Pallet Stand: Produkt Standard: pic300 bag of 30 kg 42 bag/pallet 1260 kg SR EN 13813:2003 approx. 1,8 - 2,0 kg/m² at 1 mm applied layer thickness. 0,1 - 1,0 mm BUILDING SAND Scope of use: Specific consumption: PIC300 Product code: Packaging: Pallet Stand: Produkt Standard: HOBBY HOUSE AND GARDEN CONCRETE Specific consumption: NSP top1 bag of 30 kg 42 bag/pallet 1260 kg SR EN 13813:2003 INDOOR AND OUTDOOR CEMENT SCREED FOR HEAVY WALK-ON TRAFFIC Specific consumption: HB-CG Product code: Packaging: Pallet Stand: Produkt Standard: Floor screeds, industrial flooring Intended for regular screeds, on classic supports, as regular screed or as base layer for the self-leveling screed, for indoor or outdoor surface leveling. Specific consumption: TOP 2 Scope of use: preparation of plastering mortars, floor screeds, brickwork mortars, by adding cement and/or lime. as per the material recipes in use COLORED INDUSTRIAL FLOORING Scope of use: To be used in order to obtain long lasting and resistant flooring, inside industrial facilities and intensive walkon traffic (stores, schools, hospitals, etc). Specific consumption: approx. 4 - 5 kg/m². 37
  • 38. Floor screeds semi-mechanized performance ADVANTAGES: - increased productivity of up to 3 to 5 times - material loss and theft elimination - constant quality of prepared material - ecologic storage method (elimination of paper and plastic bags) - increased work place cleanness level 1. STORAGE The ADEPLAST silo fleet allows for the storage of 18 m³ of material under safe and ecologic conditions. Thus, we save significant bag quantities that require management and recycling. 2. TRANSPORTATION In order to transport screed dried pre-mixtures from the silo to the mixing pumps, we use m-tec F100 / F140 pneumatic transport installations. 3. MECHANIZED MIXING To the purpose of water mixing as per specific recipes, we use m-tec D-20/D-30 product mixing continuous mixers. 4. FLOOR SCREED PLACEMENT The procedure is carried out manually, as per the technologies instructed under the product technical data sheets. The leveling stage may be mechanically performed by means of concrete leveling machines (helicopters).
  • 39. Plastering mortars Plastering mortars MINERAL PLASTERS Manually applied plastering mortars KLASIKO CLASSIC PLASTERING MORTAR For indoor and outdoor coarse plastering works that are only manually performed, in order to get plastered surfaces prior to applying the finishing plasters of the ADEPLAST® TINCI or ADEPLAST® MSF type. Specific consumption: TINCI Scope of use: approx. 12,0 - 15,0 kg/m² at 1 cm thickness Scope of use: Scope of use: Product code: Packaging: Pallet Stand Product Standard: tinci bag of 25 kg 48 bag/pallet 1200 kg SR EN 998-1:2011 For indoor or outdoor coarse plastering finishing works, prior to polishing plaster coat or other noble finishing products application, in order to obtain white-colored surfaces; repair of fissured and unleveled coarse plasters; fine plaster layer; surface leveling prior to faience works; surface leveling prior to applying colored noble mortar; surface leveling prior to painting approx. 3 - 4 kg/m² Product code: Packaging: Pallet Stand Product Standard: tinci-alb bag of 25 kg 48 bag/pallet 1200 kg SR EN 998-1:2011 EXTRA FINE, EXTRA PLASTIC MORTAR FOR PLASTERING AND REPAIR Scope of use: Specific consumption: 40 For the finishing of indoor and outdoor coarse plastering works, prior to applying polishing plaster coats or other noble finishing products, in order to finish coarse plasters; repair of unleveled and fissured coarse plasters; fine plaster layer; surface leveling prior to faience works; surface leveling prior to applying colored noble mortar; surface leveling prior to painting. approx. 3 - 4 kg/m² CLASSIC PLASTERING WHITE MORTAR Specific consumption: MSF klasiko bag of 30 kg 42 bag/pallet 1260 kg SR EN 998-2011 CLASSIC PLASTERING MORTAR Specific consumption: TINCI ALB Product code: Packaging: Pallet Stand Product Standard: For coarse plastering finishing works, prior to polishing plaster coat or other noble finishing products application; indoor or outdoor, coarse plaster finishing works; repair of fissured and unleveled coarse plastering; fine plaster layer; surface leveling prior to faience applying; surface leveling prior to colored noble mortar application; surface leveling prior to painting. approx. 3 - 4 kg/m² Product code: Packaging: Pallet Stand Product Standard: msf bag of 25 kg 48 bag/pallet 1200 kg SR EN 998-1:2011
  • 40. Plastering mortars EDELPUTZ WHITE – MINERAL DECORATIVE PLASTERING For the finishing of indoor or outdoor cement-based or cement-calcium lime based mineral plasters, as well as on other mineral bases, in order to obtain “stone dust” type smoothed surfaces of up to 2,0 mm granulation. Specific consumption: EDP-AN Scope of use: approx. 4,0 - 5,0 kg/m². Scope of use: For the finishing of indoor or outdoor cement-based and cement-calcium lime based mineral plastering, as well as on other mineral bases, in order to obtain “stone dust” type smoothed surfaces of an up to 2,0 mm granulation. approx. 4,0 - 5,0 kg/m². Product code: Packaging: Pallet Stand Product Standard: edpanat bag of 25 kg 48 bag/pallet 1200 kg SR EN 998-1:2011 Product code: Packaging: Pallet Stand Product Standard: hstp1000 bag of 30 kg 42 bag/pallet 1260 kg SR EN 998-1:2011 Product code: Packaging: Pallet Stand Product Standard: mai bag of 25 kg 48 bag/pallet 1200 kg SR EN 998-1:2011 HYDROSTOP 1000 – WATERPROOFING MORTAR Scope of use: To be used with waterproofing plasters for high humidity areas (bathrooms, kitchens, cellars, basements, etc.); it is particularly intended for water basin, swimming pool plastering works, for external wall plastering and heavy water exposure façade plastering works. Specific consumption: MAI edpalb bag of 25 kg 48 bag/pallet 1200 kg SR EN 998-1:2011 EDELPUTZ NATURE-WHITE – MINERAL DECORATIVE PLASTERING Specific consumption: HS1000 Product code: Packaging: Pallet Stand Product Standard: Plastering mortars EDP-A approx. 12 - 16 kg/m² for each thickness cm, depending on the surface shape EXTRA-PLASTIC,ANTI-DAMPNESS MORTAR Scope of use: Intended for dampness walls, such as: bathrooms, corridors, old houses, both indoors and outdoors. Specific consumption: approx. 10 - 18 kg/m² for each thickness cm. 41
  • 41. Plastering mortars Plastering mortars Mechanized application plastering mortars WHY ? 100 % ADEPLAST® MOBILE SILO 400 % 200 % PRODUCTIVITY PRODUCTIVITY PRODUCTIVITY MECHANIZATION LEVEL LOWissues:: lack of space Negative dirt, dust, inconsistent quality, increased performance time “ ADVANTAGES: Lack of skilled workers MECHANIZATION LEVEL MECHANIZATION LEVEL PRIMARYwater is manually added, Negative issues: the mixing time – requires checking, dust, dirt ADVANTAGES: cheap and easily transportable equipments, AVERAGE Negative issues:: dust. ADVANTAGES: controlled mixing time, controlled water dosage, Almost inexistent dust; machine SERVICES ADEPLAST® MOBILE SILO 600 % 1. Services of silo transportation to the site, supplying and re-supplying. PRODUCTIVITY MECHANIZATION LEVEL: ADVANCED ADVANTAGES: - 5 to 7 times increased productivity - loss and material theft elimination - constant quality of prepared material - ecological storage (eliminates plastic and paper packaging) - increased cleanness at the work place 2. Technical assistance including specialized technical support, on-site technical support, work performance follow up, SILOSERVICE team. 3. Theory and practical training for the operating teams 4. We provide the entire range of accessories, devices, spare parts and equipments for the ADEPLAST® MOBILE SILO application. Intervention utility vehicle 42 Three-phase generator
  • 42. Plastering mortars CEMENT DROP MARK 50 Scope of use: Specific consumption: MTI-25 Intended for concrete wall, ceramic block or highly absorbent wall priming, as a first plastering layer, in order to even absorption and improve adherence of the following plastering layers. approx. 3 - 5 kg/m². Scope of use: Intended as plasters and simultaneous finishing, for indoor purposes, under classic manual method or with plastering machines, for high humidity rooms (bathrooms, kitchens, etc) as well as for small repairs of existing plaster layers 10 - 13 kg/m² for each thickness cm. Intended for outdoor plastering and simultaneous finishing by classic manual methods or by means of plastering machines, in humidity rooms, as well as for small repairs of existing plastering layers. mti-25 bag of 30 kg 42 bag/pallet 1260 kg SR EN 998-1:2011 approx. 3 - 15 kg/m² for each thickness cm. Product code: Packaging: Pallet Stand: Product Standard: mte-35 bag of 30 kg 42 bag/pallet 1260 kg SR EN 998-1:2011 Product code: Packaging: Pallet Stand: Product Standard: mtig-20 bag of 30 kg 40 bag/pallet 1200 kg SR EN 13279-1:2008 Product code: Packaging: Pallet Stand: Product Standard: seismo bag of 30 kg 42 bag/pallet 1260 kg SR EN 998-1:2011 GYPSUM-LIME POLISHING PLASTER COAT MORTAR Scope of use: To be used as indoor plasters and simultaneous polishing plaster coating, in dry places. Specific consumption: SEISMO Product code: Packaging: Pallet Stand: Product Standard: OUTDOOR CEMENT-LIME MORTAR FOR PLASTERING AND REPAIRS Scope of use: Specific consumption: MTIG-20 amc50 bag of 30 kg 42 bag/pallet 1260 kg SR EN 998-1:2011 INDOOR CEMENT-LIME MORTAR FOR PLASTERING AND REPAIRS Specific consumption: MTE-35 Product code: Packaging: Pallet Stand: Product Standard: Plastering mortars AMC-50 approx. 8 - 10 kg/m² for each applied thickness cm. INDOOR-OUTDOOR PLASTERING AND REPAIR MORTAR Scope of use: Intended as highly resistant plastering mortar, for consolidation works – structural rehabilitation and outdoor and indoor plastering by means of the classic manual method or by special application machines, as supplied by our company. Specific consumption: approx. 15 - 17 kg / m² for each applied thickness cm. 43
  • 43. Polishing plaster coats Polishing plaster coats WALL FINISHING POLISHING PLASTER COATS GM-20 GLETUL MESERIAȘULUI, INDOOR POLISHING PLASTER COAT COMPOSITION Scope of use: Intended for indoor finishing of excessive humidity – free surfaces that are made of concrete, light concrete, cement-based dried plasters, cement-lime plasters, gypsum boards. It is used in order to obtain extremely smooth, fine surfaces prior to paint works or oil painting. Specific consumption: 0,5 at 1 kg/m² Product code Packaging: Pallet Stand Product Standard: Scope of use: Intended for indoor excessive humidity-free surfaces made of concrete, light concrete, cement-based and cement-lime based dried plastering, gypsum boards. It is used in order to obtain extremely fine and smooth surfaces prior to paint works or oil painting, by means of the T-MAX 405 application machine. SAGL0 bucket 25 kg 24 buckets/pallet 600 kg Approved by INCERC Product code Packaging: Pallet Stand Product Standard: gm20t-max bag of 20 kg 48 bag/pallet 960 kg SR EN 13279-1:2008 0,5 at 1 kg/m² SUPER GLET DE IPSOS, INDOOR POLISHING PLASTER COAT COMPOSITION Scope of use: Specific consumption: Intended for the finishing of excessive humidity-free surfaces made of concrete, light concrete, cement-based and cement-lime based dried plastering, gypsum boards. It is used in order to obtain extremely fine and smooth surfaces, prior to wallpaper application, paint works or oil painting. 0,5 at 1 kg/m² Product code Packaging: Pallet Stand Product Standard: 44 gm4x5 cutie 4 x 5 kg 28 cutii/pallet 560 kg SR EN 13279-1:2008 GLETUL MESERIAȘULUI FOR MECHANIZED APPLICATION Specific consumption: SGI-20 Product code Packaging: Pallet Stand Product Standard: gm05 pungă 5 kg 112 png./pallet 560 kg SR EN 13279-1:2008 gm25 bag of 20 kg 48 bag/pallet 960 kg SR EN 13279-1:2008 Product code Packaging: Pallet Stand Product Standard: s.a. GM-20 T-MAX Product code Packaging: Pallet Stand Product Standard: sgi05 pungă 5 kg 84 png./pallet 420 kg SR EN 13279-1:2008 Product code Packaging: Pallet Stand Product Standard: sgi20 bag of 20 kg 48 bag/pallet 960 kg SR EN 13279-1:2008 Product code Packaging: Pallet Stand Product Standard: sgi3x5 cutie 3 x 5 kg 28 cutii/pallet 420 kg SR EN 13279-1:2008
  • 44. Polishing plaster coats IC-90 CONSTRUCTION/BUILDING GYPSUM Depending on the use manner. Scope of use: For wall electric installations fixing works, hole filling, little repairs to support surfaces as well as leveling, only for indoor purposes, model casting, statues, moulds, etc Depending on the use manner. Product code Packaging: Pallet Stand Product Standard: Product code Packaging: Pallet Stand Product Standard: im9920 bag of 20 kg 48 bag/pallet 960 kg SR EN 13279-1:2008 im99-05 pungă 5 kg 84 png./pallet 420 kg SR EN 13279-1:2008 Product code Packaging: Pallet Stand Product Standard: im99-3x5 cutie 3 x 5 kg 28 cutii/pallet 420 kg SR EN 13279-1:2008 INDOOR AND OUTDOOR ALL PURPOSE CEMENT-BASED POLISHING PLASTER COAT Scope of use: Specific consumption: SGC ic-90 bag of 20 kg 48 bag/pallet 960 kg SR EN 13279-1:2008 MOULDING GYPSUM Specific consumption: GU Product code Packaging: Pallet Stand Product Standard: Polishing plaster coats Intended for wall electric installations fixing works, for hole filling, little repairs of support surfaces as well as leveling, various construction works, only for indoor purposes. Specific consumption: IM-99 Scope of use: Intended for the finishing of indoor and outdoor surfaces made of concrete, light concrete, cement-based and cement-lime based dried plastering. It is used in order to obtain extremely fine and smooth surfaces, in high humidity facilities and for outdoor purposes, being anti-mold polishing plaster coat. 0,5 at 1 kg/m² at 1 mm thickness applied layer. Product code Packaging: Pallet Stand Product Standard: GU20 bag of 20 kg 48 bag/pallet 960 kg SR EN 998 - 1:2011 INDOOR AND OUTDOOR SUPER CEMENT POLISHING PLASTER COAT Scope of use: Specific consumption: Intended for the finishing of indoor and outdoor surfaces made of concrete, light concrete, cement-based and cement-lime based plastering, where the risk exists for a humid ambient after application (such as bathrooms (bathrooms, kitchen, indoor swimming pools, etc). It is used in order to obtain extremely fine and smooth surfaces. 0,5 at 1 kg/m² at 1 mm of thickness applied layer. Product code sgc05 Packaging: pungă de 5 kg Pallet Stand 140 bag/pallet 700 kg Product Standard: SR EN 998 - 1:2011 Product code Packaging: Pallet Stand Product Standard: sgc20 bag of 20 kg 48 bag/pallet 960 kg SR EN 998 - 1:2011 Product code Packaging: Pallet Stand Product Standard: sgc5x5 cutie 5 x 5 kg 28 cutii/pallet 700 kg SR EN 998 - 1:2011 45
  • 45. Decorative plastering and painting Decorative plastering and painting DECORATIVE PLASTERING AND PAINTING Decorative plastering texture type Decorative plastering texture type 46 Decorative plastering application guide PRODUCT DESCRIPTION: Structured decorative, outstanding, ready-to-use, water-dilution synthetic resin-based plastering. Extra washable, elastic, flexible, waterproofing, vapor permeable scratch and hit resistant, highly to environmental aggressive factors: rain, humidity, temperature variations, sun radiation, pollution, etc. SCOPE OF USE: Intended for decorative covering and particularly impressive finishing within indoor and outdoor works. Easy to apply on any type of mineral surface: plastering, polishing plaster coat, concrete, brickwork, plaster board, etc, in single layer. SUPPORT SURFACE: The support surface the plastering is applied on must be dry, dusted, flat and bearing. Any prominences shall be removed. Non-homogenous surfaces presenting oleaginous or any other type of substances and which may cause a harmful skin to be formed between the material and the support base, must be adequately treated. SUPPORT SURFACE PREPARATION: Before beginning and based on the determined material needs, you must prepare the quantity as required for the entire surface. Continuous surfaces must be covered by material belonging to the same batch or by buckets from different batches that have been previously mixed. The mixing is performed by means of a mixer that is attached to a drill press. Before applying the decorative material to the surface, it is necessary that you apply an adequate primer layer and such process must be performed at least 24 hours prior. You shall use a primer of the same color as the colored plastering. PREPARATION AND APPLICATION METHOD For smoothed plastering ( of 1.0mm, 1.5mm, 3.0mm) and scuffed plastering (of 2.0mm, 3.0mm). Use stainless steel grouter when applying (metal plasterer’s hawk) in a layer as thin as possible (optimum thickness of the layer as closer to the granule diameter as possible). The structuring (getting specific appearance) is performed by using a plastic plasterer’s hawk (structuring plate). In case of the smoothed plastering, the structuring shall be carried out uniformly until you obtain the raised appearance and the desired appearance: granulated, calcium type. As for the scuffed plastering, you may select flute sizing, direction and shape depending on the manner (direction) of the structuring (e.g. vertical, horizontal, round, irregular, etc). Always remove excess material off the plasterer’s hawk. In order to avoid grey modification of the surface color, avoid smoothing for too long a time. The application must be continuous since, in case of a prolonged waiting, the material starts drying out and thus the exploitability thereof starts reducing. Structure formation must be carried out immediately after application, before drying out. The product may be diluted with no more than 300 ml of drinkable water. For roll-on plastering The application shall be performed by using a stainless steel teethed 4 mm grouter; then the material must be uniformly dispersed by means of a structure rough sponge roll (hole- surfaced), vertically and then horizontally. The last roll operation must be performed from top to bottom. The time interval elapsing between the application and the structuring must be as short as possible, because otherwise the material begins to fry out and its exploitability is thus reduced. Plastering application under optimum conditions requires an air and support surface temperature of +5°C and + 30°C. Further more, the plastering shall not be applied directly under the sun rays or during strong wind conditions or when raining or freezing risks exist, since same may cause fissures and color differences during the application. Upon application completion, the exterior surfaces shall be protected against the rain until full drying (48 h at 20°C). In case of any colored decorative plastering, the joints and color combinations must be performed by using paper self-adhesive straps. Prod-
  • 46. Decorative plastering and painting VAT DECOPLAST ECO – ECONOMIC STRUCTURED DECORATIVE PLASTER Intended for impressive effect decorative covering and finishing works for both indoor and outdoor purposes. It may be applied on any type of mineral surfaces: plasters, polishing plaster coats, concrete, brickwork, gypsum board, etc. Professional quality, application ease, single layer. Coloring: The product may be delivered as already colored by the manufacturer depending on the beneficiary’s option, based on the ADEPLAST® color pallette or it may delivered on white color and it shall be subsequently shaded by means of coloring pastes.. Specific consumption: - Smoothed plaster: 1,5 mm - 2,5 kg / m² - Scuffed plaster: 2,0 mm - 2,8 kg / m² Instructed consumption refers to perfectly flat surfaces and varies depending on the applied layer thickness and on the support surface characteristics. This is why we may not take any responsibility concerning the material requirements for each case in particular. TROWELED PLASTER 1,5 mm B2 - intermediary base, pastel colors B3 -transparent base, pastel colors SCRATCHED PLASTER 2,0 mm B2 - intermediary base, pastel colors B3 -transparent base, pastel colors Product code VATD15B2 Granulation: 1.5mm Base type: intermediary - B2 Packaging: bucket 28 kg Pallet Stand 24 buckets/pallet 672 kg Product Standard: SR EN 15824:2009 Product code VATD15B3 Granulation: 1.5mm Base type: transparentă - B3 Packaging: bucket 28 kg Pallet Stand 24 buckets/pallet 672 kg Product Standard: SR EN 15824:2009 Product code VATZ20B2 Granulation: 2.0mm Base type: intermediary - B2 Packaging: bucket 28 kg Pallet Stand 24 buckets/pallet 672 kg Product Standard: SR EN 15824:2009 Product code VATZ20B3 Granulation: 2.0mm Base type: transparentă - B3 Packaging: bucket 28 kg Pallet Stand 24 buckets/pallet 672 kg Product Standard: SR EN 15824:2009 SAT Packaging: Pallet Stand Product Standard: DECOPLAST – STRUCTURED DECORATIVE PLASTER Decorative plastering and painting Scope of use: Scope of use: Intended for impressive effect decorative covering and finishing within both indoor and outdoor works. It may be applied on any type of mineral surface: plaster, polishing plaster coat, concrete, brickwork, gypsum board, etc. Professional quality, application ease, single layer. Coloring: The product is delivered as already colored by the manufacturer depending on the beneficiary’s option. And based on the ADEPLAST® color pallette, or it may be delivered in white color and it shall subsequently be shaded upon application by using coloring paste. Specific consumption: - Smoothed plaster: 1,0 mm - 2,0 kg / m²; 1,5 mm - 2,5 kg / m² 3,0 mm - 3,5 kg / m² -Scuffed plaster: 2,0 mm - 2,8 kg / m²; 3,0 mm - 3,1 kg / m² - Rolled plaster: 1,5 kg ÷ 2,5 kg / m² bucket 28 kg. The aforementioned consumption refers to perfectly flat surfaces and varies depending on the applied 24 buckets/pallet 672 kg. layer thickness. This is why we may not take any responsibility concerning the material requirements for SR EN 15824:2009. each case in particular. B1 - white base, pastel colors B2 - intermediary base, pastel colors B3 -transparent base, pastel colors TROWELEDPLASTER Granunlation Product code SATD10B1 Product code SATD10B2 Product code SATD10B3 TROWELED PLASTER Granunlation Product code SATD15B1 Product code SATD15B2 Product code SATD15B3 TROWELED PLASTER Granunlation Product code SATD30B1 Product code SATD30B2 Product code SATD30B3 SCRATCHED PLASTER Granunlation Product code SATZ20B1 Product code SATZ20B2 Product code SATZ20B3 SCRATCHED PLASTER Granunlation Product code SATZ30B1 Product code SATZ30B2 Product code SATZ30B3 ROLED PLASTER Product code SATRB1 Product code SATRB2 Product code SATRB3 47
  • 47. Decorative plastering and painting Decorative plastering and painting Dispersion–based white paints VAVIP PROFESSIONAL’S PAINT - PROJECT Scope of use: Specific consumption: Intended to paint all indoor mineral supports that are lime, lime-cement, lime-gypsum, gypsum and concrete-based, as well as to cover the surfaces that were processed by means of dispersion paints or wallpapered, under required bearing capacity, in order to provide highly white finishing. Intended particularly for a high productivity finishing of indoor civil buildings surfaces. Approx. 0,20 - 0,30 liters/m², for 2 layers Product code Packaging: Pallet Stand Product Standard: s.a. SAVIW Scope of use: Approved by INCERC Intended to paint all indoor mineral supports that are lime, lime-cement, lime-gypsum, gypsum and concrete-based, as well as to cover the surfaces that were processed by means of dispersion paints or wallpapered, under required bearing capacity, in order to provide highly white finishing. Intended particularly for high productivity finishing of indoor civil building surfaces. Approx. 0,20 - 0,30 liters/m², for 2 layers. Product code Packaging: Pallet Stand Product Standard: s.a. 100 buckets/pallet 320 kg Approved by INCERC Product code Packaging: Pallet Stand Product Standard: s.a. VAVIP8L bucket 8L Product code Packaging: Pallet Stand Product Standard: s.a. SAVIW3L bucket 3L 36 buckets/pallet 461 kg Approved by INCERC SAVIW15L bucket 15L 24 buckets/pallet 576 kg Approved by INCERC 100 buckets/pallet 320 kg Approved by INCERC Product code Packaging: Pallet Stand Product Standard: s.a. SAVIW8L bucket 8L Product code Packaging: Pallet Stand Product Standard: s.a. SAVI03L bucket 3L 36 buckets/pallet 461 kg Approved by INCERC PROFESSIONAL’S PAINT, INDOOR WHITE PAINT Scope of use: Specific consumption: Intended to paint all indoor mineral supports that are lime, lime-cement, lime-gypsum, gypsum and concrete-based, as well as to cover the surfaces that were processed by means of dispersion paints or wallpapered, under required bearing capacity, in order to provide highly white finishing. Intended particularly for a high productivity finishing of indoor civil buildings surfaces. Approx. 0,20 - 0,30 liters/m², for 2 layers Product code Packaging: Pallet Stand Product Standard: s.a. 48 24 buckets/pallet 576 kg VAVIP3L bucket 3L MISTER WEISS INDOOR WASHABLE WHITE PAINT Specific consumption: SAVI0 VAVIP15L bucket 15L Product code Packaging: Pallet Stand Product Standard: s.a. SAVI015L bucket 15L 24 buckets/pallet 576 kg Approved by INCERC Product code Packaging: Pallet Stand Product Standard: s.a. 100 buckets/pallet 320 kg Approved by INCERC SAVI08L bucket 8L 36 buckets/pallet 461 kg Approved by INCERC
  • 48. Decorative plastering and painting SAVI PROFESSIONAL’S SUPER PAINT, COLORING BASES Scope of use: Specific consumption: Intended to paint all indoor mineral supports that are based on lime, lime-cement, lime-gypsum, gypsum and concrete, as well as to cover the surfaces that were processed by means of dispersion paints or wallpapered, under required bearing capacity, in order to provide highly white finishing. Intended particularly for a high productivity finishing of indoor civil buildings surfaces. Approx. 0,20 - 0,30 liters/m², for two layers Product code Packaging: Pallet Stand Product Standard: s.a. VAVE 24 buckets/pallet 576 kg Approved by INCERC SAVI3L bucket 3L 100 buckets/pallet 320 kg Approved by INCERC Product code Packaging: Pallet Stand Product Standard: s.a. SAVI8L bucket 8L Product code Packaging: Pallet Stand VAVE3L bucket 3L 100 buckets/pallet 320 36 buckets/pallet 461 kg Approved by INCERC OUTDOOR PROFESSIONAL’S PAINT - ECO Scope of use: Specific consumption: Intended to paint all indoor mineral supports that are based on lime, lime-cement, lime-gypsum, gypsum and concrete, as well as to cover the surfaces that were processed by means of dispersion paints or wallpapered, under required bearing capacity, in order to provide highly white finishing. Intended particularly for a high productivity finishing of indoor civil buildings surfaces. Approx. 0,20 - 0,30 liters/m², for two layers Product code Packaging: Pallet Stand Product Standard: s.a. SAVE SAVI15L bucket 15L Product code Packaging: Pallet Stand Product Standard: s.a. VAVE15L bucket 15L Decorative plastering and painting Dispersion-base paints, coloring bases kg Product Standard: Approved by INCERC s.a. 24 buckets/pallet 576 kg Product code Packaging: Pallet Stand Product Standard: s.a. VAVE8L bucket 8L Intended to paint all indoor mineral supports that are based on lime, lime-cement, lime-gypsum, gypsum and concrete, as well as to cover the surfaces that were processed by means of dispersion paints or wallpapered, under required bearing capacity, in order to provide highly white finishing. Intended particularly for a high productivity finishing of indoor civil buildings surfaces. Approx. 0,20 - 0,30 liters/m², for two layers Product code Packaging: Pallet Stand Product Standard: s.a. SAVE3L bucket 3L Approved by INCERC 36 buckets/pallet 461 kg Approved by INCERC OUTDOOR PROFESSIONAL’S PAINT Scope of use: Specific consumption: Product code Packaging: Pallet Stand Product Standard: s.a. SAVE15L bucket 15L 24 buckets/pallet 576 kg Approved by INCERC Product code Packaging: Pallet Stand Product Standard: s.a. 100 buckets/pallet 320 kg Approved by INCERC SAVE8L bucket 8L 36 buckets/pallet 461 kg Approved by INCERC 49
  • 49. Decorative plastering and painting Decorative plastering and painting New Products SGWAM SILBER GRUNDWEISS - WHITE WASHABLE PAINT WALL PRIMER Scope of use: Specific consumption: SEHVI Intendeds to treat the mineral supports in order to reduce and homogenize the absorption capacity thereof, in case of local repair supports. Intended to adjust absorption and to improve adherence. Intended to eliminate stained paint drying. Approx. 50 – 100 ml / m², depending on the absorption capacity and the support nature. SILBER EINE HAND - INDOOR WASHABLE WHITE PAINT Scope of use: Specific consumption: Intended to paint all indoor mineral supports that are lime, lime-cement, lime-gypsum, gypsum and concrete-based, as well as to cover the surfaces that were processed by means of dispersion paints or wallpapered, under required bearing capacity, in order to provide highly white finishing. Intended particularly for high productivity finishing of indoor civil building surfaces. Approx. 0,20 - 0,30 liters/m², for 2 layers. SILBER - SUPERWHITE PAINTING SYSTEM + = 50
  • 50. Decorative plastering and painting SWVE SAUBER EXTERIOR - WHITE EXTERIOR PAINT Scope of use: Specific consumption: SWVI SAUBER INTERIOR - WHITE INTERIOR PAINT Scope of use: Specific consumption: SGAM Intended to paint all indoor mineral supports that are lime, lime-cement, lime-gypsum, gypsum and concrete-based, as well as to cover the surfaces that were processed by means of dispersion paints or wallpapered, under required bearing capacity, in order to provide highly white finishing. Intended particularly for a high productivity finishing of indoor civil buildings surfaces. Approx. 0,20 - 0,30 liters/m², for 2 layers SAUBER GRUND - WASHABLE PAINT WALL PRIMER Scope of use: Specific consumption: SWVI Intended to paint all indoor mineral supports that are based on lime, lime-cement, lime-gypsum, gypsum and concrete, as well as to cover the surfaces that were processed by means of dispersion paints or wallpapered, under required bearing capacity, in order to provide highly white finishing. Intended particularly for a high productivity finishing of indoor civil buildings surfaces. Approx. 0,20 - 0,30 liters/m², for two layers Decorative plastering and painting New Products Intendeds to treat the mineral supports in order to reduce and homogenize the absorption capacity thereof, in case of local repair supports. Intended to adjust absorption and to improve adherence. Intended to eliminate stained paint drying. Approx. 50 – 100 ml / m², depending on the absorption capacity and the support nature. SAUBER DEKOR – STRUCTURED DECORATIVE PLASTER IN 6 COLORS Scope of use: Intended for impressive effect decorative covering and finishing within both indoor and outdoor works. It may be applied on any type of mineral surface: plaster, polishing plaster coat, concrete, brickwork, gypsum board, etc. Professional quality, application ease, single layer. Coloring: Is already aviable in 6 colors. Specific consumption: 2,0 mm - 2,8 kg / m² 3,0 mm - 3,1 kg / m² 51
  • 51. Decorative plastering and painting Decorative plastering and painting Primers, adherence bridges SAAM0 WASHABLE PAINT WALL PRIMER Scope of use: Specific consumption: SAAMC Product code Packaging: Pallet Stand Product Standard: s.a. Approx. 50 – 100 ml / m², depending on the absorption capacity and the support nature. Product code Packaging: Pallet Stand Product Standard: s.a. Scope of use: Intended to treat smooth supports, weakly absorbent supports or absorbent-free supports (concrete surfaces, BCA, extruded polystyrene boards, plasterboards, cement semi-finished products, etc) , in order to provide an adherence bond for the following gypsum-based plaster layers, between the gypsum-based plaster layers and for the lime-cement based plaster layers. Minimum 200 g / m² (1 kg / 4 – 5 m²), depending on the roughness of the treated support base. Scope of use: Synthetic resin-based product, under water dispersion, with additives supplement; very good support adherence, fast dry off; good penetration strength; easy application. 10 – 20 m² / liter non-diluted primer SAAM010L bucket 10L 40 buckets/pallet 420 kg Approved by INCERC Product code Packaging: Pallet Stand Product Standard: s.a. SAAMC bucket 22 kg Product code Packaging: Pallet Stand Product Standard: Central s.a ACAMX1L flacon 1L 448 flac./pallet 460 kg Approved by Laborator Product code Packaging: Pallet Stand Product Standard: Central s.a. ACAMX5L bidon 5L 60 bid./pallet 400 kg Approved by Laborator 24 buckets/pallet 550 kg Approved by INCERC RENOWA IMPREGNATION - WATERPROOFING ROUGH COAT Scope of use: Specific consumption: 52 100 buckets/pallet 320 kg Approved by INCERC SELF-LEVELING CEMENT FLOORING ACRYLIC PRIMER Specific consumption: SIGI0 SAAM03L bucket 3L BETONCONTACT (CONCRETE CONTACT)– ADHERENCE BOND/BRIDGE Specific consumption: ACAMX Intendeds to treat the mineral supports in order to reduce and homogenize the absorption capacity thereof, in case of local repair supports. Intended to adjust absorption and to improve adherence. Intended to eliminate stained paint drying. – intended to treat highly humid mineral supports in order to lower and stabilize humidity - as first layer in the RENOWA drainage/sanitation system . Approx. 100 - 200 ml/m² depending on the support nature and absorption capacity. Product code Packaging: Pallet Stand Product Standard: s.a. SIGI0 bidon 5L 60 bid./pallet 500 kg Approved by INCERC
  • 52. Decorative plastering and painting DECORATIVE PLASTER ROUGH COAT Scope of use: Intended to prime all plastered surfaces (smoothed plasters of lime, lime-cement, cement, spatula mass ), plasterboards, painted surfaces (or with decorative plasters), new or old but with a good adherence, both indoors and outdoors, as a layer preceding the styrene-acrylic and silicone decorative plaster finishing, foundation plasters and thermal systems. Specific consumption: Product code Packaging: Pallet Stand Product Standard: s.a. SAGTC bucket 24 kg 24 buckets/pallet 550 kg Approved by INCERC 5 94576 2 003423 Approx. 150 - 350g/m² (1kg / 3 - 6 m², depending on the treated support roughness) ADEPLAST Color System - over 250 own colors - over 1000 hues available For automatic dosage and upon paint, rough coat and decorative plaster coloring, we assist our clients by means of the HA-600, HA-450 and TM-300 automatic machines (24 canisters) ACTSC Decorative plastering and painting SAGTC MOZAICPLAST – FOUNDATION DECORATIVE PAINT Scope of use: Specific consumption: The product belongs to the decorative finishing product category and is intended particularly for foundation, column, pole, etc, application, for both indoors and outdoors. It is particularly intended for professional use. The product shall be used for decorative covering and extremely impressive finishing within both indoor and outdoor works. It may be applied on any type of mineral surfaces: plasters, polishing plaster coat, concrete, brickwork, plasterboards, etc. Professional quality, easy application, single layer. 4.0 - 5.0 kg/m² Product code Packaging: Pallet Stand Product Standard: ACTSC bucket 25 kg 24 buckets/pallet 600 kg SR EN 15824:2009 53
  • 53. Contents Contents PROFESSIONAL SERIES - ADEPLAST INOVATION...................................................................................................................................6 AERIA Series - revolutionary vectors of the PORUS X ingredients...........................................................................................................................7 APAH0 AERIA STONE with PORUS X - hydrophobic action for natural stones and facades.....................................................................7 APVI AERIA with PORUS X - interior paint........................................................................................................................................7 APVE AERIA with PORUS X - exterior paint........................................................................................................................................7 APT AERIA PLAST with PORUS X - decorative plaster.......................................................................................................................7 Silicon Based Paints and Decorative Plasters........................................................................................................................................................8 SIT DECOPLAST SILICONICĂ- STRUCTURED DECORATIVE PLASTER...................................................................................................9 SIVE VOPSEAUA MESERIAȘULUI - SILICON.........................................................................................................................................9 Ceramic tiles adhesives - POLYMER 1000X.................................................................................................................................................11 AFX-9 SPECIAL ADHESIVE FOR CERAMIC TILES – FOR INTERIOR.........................................................................................................11 SPECIAL ADHESIVE FOR PORCELAIN CERAMIC TILES..........................................................................................................11 AF 11 plus Finishing Plasters cu PO GM 126 GYPSUM BASED PLASTER WITH PORUS X, FOR FINISHING WORKS...........................................................................................11 GM 127 CEMENT BASED PLASTER WITH PORUS X, FOR FINISHING WORKS............................................................................................11 ADHESIVES FOR TILING........................................................................................................................................................................................12 AF-I CERAMIC TILES ADHESIVE FOR INTERIOR SURFACES.................................................................................................................13 AF-E CERAMIC TILES ADHESIVE FOR EXTERIOR SURFACES................................................................................................................13 AF CERAMIC TILES ADHESIVE FOR INTERIOR / EXTERIOR SURFACES..............................................................................................14 AF-N HIGH STRENGTH SUPERPLASTIC ADHESIVE .............................................................................................................................14 AF-S GREY SUPERFLEXIBLE HIGH STRENGHT ADHESIVE ...........................................................................................................................14 AF-S WHITE SUPERFLEXIBLE HIGH STRENGHT ADHESIVE ...........................................................................................................................14 AF-11 + PORZELLANO - ADHESIVE FOR PORCELAIN TILES.....................................................................................................................14 FS-57 WHITE WHITE ADHESIVE FOR NATURAL STONES ................................................................................................................................15 FS-57 GREY GREY ADHESIVE FOR NATURAL STONES ..................................................................................................................................15 MX WHITE WHITE ADHESIVE FOR MARBLE AND GRANITE.........................................................................................................................15 MX GREY ADHESIVE FOR MARBLE AND GRANITE....................................................................................................................................15 MH-1K MONO-COMPONENT WATERPROOF MEMBRANE......................................................................................................................15 KITS FOR JOINTING...........................................................................................................................................................................16 QK-6 QK-15 KIT FOR JOINTING CERAMIC PLATES 2 - 6 mm..........................................................................................................................16 KIT FOR JOINTING CERAMIC TILES 5 - 15 mm...........................................................................................................................17 ADP70 ADP80 EPS70 EPS80 EPS80+ EPS100 EPS120 EPS150 EPS200 IPS MW EPS-PV P-BLU P-BLU FEIN FIRE RETARDANT EXPANDED POLYSTYRENE BOARDS ..............................................................................................................18 FIRE RETARDANT EXPANDED POLYSTYRENE BOARDS ..............................................................................................................18 FIRE RETARDANT EXPANDED POLYSTYRENE BOARDS...............................................................................................................18 FIRE RETARDANT EXPANDED POLYSTYRENE BOARDS...............................................................................................................19 FIRE RETARDANT EXPANDED POLYSTYRENE BOARDS...............................................................................................................19 FIRE RETARDANT EXPANDED POLYSTYRENE BOARDS...............................................................................................................19 FIRE RETARDANT EXPANDED POLYSTYRENE BOARDS...............................................................................................................19 FIRE RETARDANT EXPANDED POLYSTYRENE BOARDS...............................................................................................................22 FIRE RETARDANT EXPANDED POLYSTYRENE BOARDS...............................................................................................................22 INJECTED EXPANDED POLYSTYRENE PERIMETER BOARDS........................................................................................................22 MINERAL WOOL / BASALT MINERAL WOOL..............................................................................................................................22 EXPANDED POLYSTYRENE ADDITIVE-FREE VIRGIN BEADS........................................................................................................23 POLITERM BLU – E.I.A ADDITIVATED EXPANDED POLYSTYRENE BEADS....................................................................................23 POLITERM BLU FEIN - E.I.A ADDITIVATED EXPANDED POLYSTYRENE BEADS..............................................................................23 PSP PSP WHITE PS-ECO PS-FA OSB-KLEBER MW-KLEBER POLISTIROL PREMIUM – POLYSTYRENE INTENDED ADHESIVE/GLUE AND SPATULA MASS......................................................26 POLISTIROL PREMIUM WHITE – POLYSTYRENE ADHESIVE/GLUE AND SPATULA MASS....................................................................... 27 POLISTIROL €CO – EXPANDED POLYSTYRENE ADHESIVE/GLUE.................................................................................................27 SUPER POLISTIROL – REINFORCING FIBERS ADHESIVE/GLUE AND SPATULA MASS...................................................................27 EXPANDED POLYSTYRENE ADHESIVE/GLUE FOR WOODEN SUPPORT APPLICATION...................................................................27 MINERALWOOL KLEBER – BASALT MINERAL WOOL ADHESIVE/GLUE.......................................................................................27 SAGTC SIT RW-W RW-L RW-SPZ ROUGH COAT FOR DECORATIVE PLASTERS................................................................................................................................29 SILICONE DECOPLAST – STRUCTURED DECORATIVE PLASTER...................................................................................................29 RENOWA-W PLASTER MORTAR FOR OLD BUILDINGS DRAINAGE..............................................................................................29 RENOWA-L PLASTER MORTAR FOR DRAINAGE AND LEVELING.................................................................................................29 RENOWA SPRITZ CEMENT DROP..............................................................................................................................................29 MZ-BCA MZ-5 MZ-STICLA MZ-STICLA ALB BETON-FIX BCA BLOCKS WALLING MORTAR..............................................................................................................................................31 CONCRETE AND BRICK BLOCKS WALLING MORTAR...................................................................................................................31 GLASS BRICKS WALLING MORTAR............................................................................................................................................31 GLASS BRICK WALLING WHITE MORTAR..................................................................................................................................31 MONOLITHIZATION SPECIAL MORTAR......................................................................................................................................31 THERMAL INSULATING MATERIALS...................................................................................................................................................18 THERMAL INSULATION SYSTEMS – ADHESIVES/GLUES, SPATULA MASS...............................................................................................26 RENOWA DRAINAGE SYSTEM............................................................................................................................................................28 BRICKWORK MORTARS.....................................................................................................................................................................30 54
  • 54. Contents GYPSUM BOARD SYSTEM – ADHESIVE/GLUE, JOINT FILLER, POLISHING PLASTER COAT .......................................................................34 GIPSCARTON FIX – GYPSUM BOARD GLUING ADHESIVE...........................................................................................................35 GYPSUM BOARD JOINTING FILLER KIT.....................................................................................................................................35 POLISHING PLASTER COAT COMPOSITION FOR GYPSUM BOARDS COATING...............................................................................35 FLOOR SCREEDS AND INDUSTRIAL FLOORING....................................................................................................................................36 Self-levelling floor screed placement guide..............................................................................................................................................36 SA 2-10 2-10mm INDOOR SELF-LEVELING FLOOR SCREED....................................................................................................................36 SAR 2-10 2-10mm FAST INDOOR SELF-LEVELING FLOOR SCREED............................................................................................................36 TOP 1 INDOOR AND OUTDOOR CEMENT SCREED FOR HEAVY WALK-ON TRAFFIC ................................................................................37 TOP 2 INDOOR AND OUTDOOR CEMENT SCREED FOR HEAVY WALK-ON TRAFFIC.................................................................................37 HB-CG HOBBY HOUSE AND GARDEN CONCRETE..................................................................................................................................37 NSP 0,1 - 1,0 mm BUILDING SAND.................................................................................................................................................37 PIC300 COLORED INDUSTRIAL FLOORING............................................................................................................................................37 Contents AGC KGC-50 GLET-FIX MINERAL PLASTERS.........................................................................................................................................................................40 Manually applied plastering mortars.......................................................................................................................................................40 KLASIKO CLASSIC PLASTERING MORTAR................................................................................................................................................40 TINCI CLASSIC PLASTERING MORTAR................................................................................................................................................40 TINCI ALB CLASSIC PLASTERING WHITE MORTAR.....................................................................................................................................40 MSF EXTRA FINE, EXTRA PLASTIC MORTAR FOR PLASTERING AND REPAIR.......................................................................................40 EDP-A EDELPUTZ WHITE – MINERAL DECORATIVE PLASTERING.........................................................................................................41 EDP-AN EDELPUTZ NATURE-WHITE – MINERAL DECORATIVE PLASTERING...........................................................................................41 HS1000 HYDROSTOP 1000 – WATERPROOFING MORTAR......................................................................................................................41 MAI EXTRA-PLASTIC,ANTI-DAMPNESS MORTAR.............................................................................................................................41 Mechanized application plastering mortars.............................................................................................................................................42 AMC-50 CEMENT DROP MARK 50.........................................................................................................................................................43 MTI-25 INDOOR CEMENT-LIME MORTAR FOR PLASTERING AND REPAIRS.............................................................................................43 MTE-35 OUTDOOR CEMENT-LIME MORTAR FOR PLASTERING AND REPAIRS ........................................................................................43 MTIG-20 GYPSUM-LIME POLISHING PLASTER COAT MORTAR................................................................................................................43 SEISMO MORTAR INTERIOR - EXTERIOR, PENTRU TENCUIRE SI REPARAȚII.............................................................................................43 WALL FINISHING POLISHING PLASTER COATS....................................................................................................................................44 GM-20 GM-20 T-MAX SGI-20 IC-90 IM-99 GU SGC GLETUL MESERIAȘULUI, INDOOR POLISHING PLASTER COAT COMPOSITION.............................................................................44 GLETUL MESERIAȘULUI FOR MECHANIZED APPLICATION.........................................................................................................44 SUPER GLET DE IPSOS, INDOOR POLISHING PLASTER COAT COMPOSITION...............................................................................44 CONSTRUCTION/BUILDING GYPSUM........................................................................................................................................45 MOULDING GYPSUM ..............................................................................................................................................................45 INDOOR AND OUTDOOR ALL PURPOSE CEMENT-BASED POLISHING PLASTER COAT..................................................................45 INDOOR AND OUTDOOR SUPER CEMENT POLISHING PLASTER COAT.........................................................................................45 DECORATIVE PLASTERING AND PAINTING..........................................................................................................................................46 VAT DECOPLAST ECO – ECONOMIC STRUCTURED DECORATIVE PLASTER.........................................................................................47 SAT DECOPLAST – STRUCTURED DECORATIVE PLASTER..................................................................................................................47 Dispersion–based white paints ...............................................................................................................................................................48 VAVIP PROFESSIONAL’S PAINT - PROJECT...........................................................................................................................................48 SAVIW MISTER WEISS INDOOR WASHABLE WHITE PAINT....................................................................................................................48 SAVI0 PROFESSIONAL’S PAINT, INDOOR WHITE PAINT........................................................................................................................48 Dispersion-base paints, coloring bases.....................................................................................................................................................49 SAVI PROFESSIONAL’S SUPER PAINT, COLORING BASES....................................................................................................................49 VAVE OUTDOOR PROFESSIONAL’S PAINT - ECO..................................................................................................................................49 SAVE OUTDOOR PROFESSIONAL’S PAINT...........................................................................................................................................49 New Products..........................................................................................................................................................................................50 SGWAM SILBER GRUNDWEISS - WHITE WASHABLE PAINT WALL PRIMER.........................................................................................50 SEHVI SILBER EINE HAND - INDOOR WASHABLE WHITE PAINT..........................................................................................................50 SILBER - SUPERWHITE PAINTING SYSTEM...........................................................................................................................................................50 New Products..........................................................................................................................................................................................51 SWVE SAUBER EXTERIOR - WHITE EXTERIOR PAINT........................................................................................................................51 SWVI SAUBER INTERIOR - WHITE INTERIOR PAINT...........................................................................................................................51 SGAM SAUBER GRUND - WASHABLE PAINT WALL PRIMER.................................................................................................................51 SWVI SAUBER DEKOR – STRUCTURED DECORATIVE PLASTER IN 6 COLORS........................................................................................51 Primers, adherence bridges.....................................................................................................................................................................52 SAAM0 WASHABLE PAINT WALL PRIMER.............................................................................................................................................52 SAAMC BETONCONTACT (CONCRETE CONTACT)– ADHERENCE BOND/BRIDGE.......................................................................................52 ACAMX SELF-LEVELING CEMENT FLOORING ACRYLIC PRIMER..............................................................................................................52 SIGI0 RENOWA IMPREGNATION - WATERPROOFING ROUGH COAT ....................................................................................................52 SAGTC DECORATIVE PLASTER ROUGH COAT........................................................................................................................................53 ACTSC MOZAICPLAST – FOUNDATION DECORATIVE PAINT..................................................................................................................53 55
  • 55. AELS DPAT w wael to w . p sr d a. o c ael to ffi e dp sr @ a.