Sunrise Telecom Product Presentation 2009. Ro

2,019 views
1,895 views

Published on

1 Comment
1 Like
Statistics
Notes
No Downloads
Views
Total views
2,019
On SlideShare
0
From Embeds
0
Number of Embeds
0
Actions
Shares
0
Downloads
0
Comments
1
Likes
1
Embeds 0
No embeds

No notes for slide

Sunrise Telecom Product Presentation 2009. Ro

  1. 1. Product Briefing 2009 Best Invest – Bucharest, RO
  2. 2. Modular Platform Solutions
  3. 3. Multi Flavor Chassis <ul><li>SunSet Modular Test Toolkit (MTT) </li></ul><ul><ul><ul><li>Basic Color </li></ul></ul></ul><ul><ul><ul><li>ACM-Lite </li></ul></ul></ul><ul><ul><ul><li>ACM </li></ul></ul></ul><ul><ul><ul><li>ACM II </li></ul></ul></ul>
  4. 4. MTT-ACM Advanced Cable Maintenance <ul><li>TDR </li></ul><ul><ul><li>- Single and Dual Trace </li></ul></ul><ul><li>Resistance Fault Locator </li></ul><ul><li>PSD Background Noise </li></ul><ul><ul><li>2.2 MHz Field Spectrum Analyzer for ADSL2+ </li></ul></ul><ul><ul><li>25 MHz range for VDSL </li></ul></ul><ul><ul><li>30 MHz range for VDSL2 </li></ul></ul><ul><li>Impulse Noise </li></ul><ul><li>Wideband Insertion Loss and SNR </li></ul><ul><ul><li>- Automated 2.2 MHz Sweep for ADSL2+ </li></ul></ul><ul><ul><li>- 20 MHz range for VDSL </li></ul></ul><ul><li>DCV, ACV, DC Current, Resistance, Capacitance </li></ul><ul><li>Cable Balance: Capacitive, Resistive </li></ul><ul><li>Load Coil Detector </li></ul><ul><li>Near End and Far End Crosstalk (NEXT/FEXT) </li></ul><ul><li>Auto Test </li></ul>
  5. 5. Multi Flavor Modules <ul><li>DSL Modules </li></ul><ul><li>ADSL2+ ATU-R </li></ul><ul><li>VDSL VTU-R </li></ul><ul><li>VDSL2 VTU-R </li></ul><ul><li>SHDSL </li></ul><ul><li>FTTN Premises </li></ul><ul><li>IPTV Test Suite </li></ul><ul><li>VoIP Test Suite </li></ul><ul><li>Optical Modules </li></ul><ul><li>Optical Test Toolkit </li></ul><ul><li>Micro OTDR </li></ul><ul><li>Optical Channel Monitor </li></ul><ul><li>Transport and Service Modules </li></ul><ul><li>E1/ Dual E1 </li></ul><ul><li>Dual T1 </li></ul><ul><li>DS3 </li></ul><ul><li>SDH/SONET </li></ul><ul><li>Datacom/DDS </li></ul><ul><li>Ethernet </li></ul><ul><li>Gigabit Ethernet </li></ul><ul><li>Fiber Channel </li></ul><ul><li>Multi-Protocol </li></ul><ul><li>VoIP </li></ul>
  6. 6. STT <ul><li>The Modular Solution for SDH/SONET, xWDM, Ethernet & Physical Layer Testing </li></ul><ul><li>OTN testing </li></ul><ul><li>Next-generation SONET/SDH, VCAT, GFP and LCAS testing </li></ul><ul><li>SONET/SDH, PDH/T-carrier testing </li></ul><ul><li>xWDM measurements including Optical Channel Monitor </li></ul><ul><li>Ethernet testing at 10/100/1000 Mbps and 10 Gbps </li></ul><ul><li>Cost-effective, stand-alone configuration </li></ul><ul><li>Maximum flexibility including multiple simultaneous tests and remote operation </li></ul><ul><li>Innovative modular design that evolves with your network </li></ul>
  7. 7. STT The Scalable Test Toolkit STT • Fully independent or stackable test modules • Ultra-bright LCD touch screen • Intuitive User Interface • Familiar Microsoft Windows XP® Interface • Fixed IP or DHCP terminal emulation • Remote operation or standalone capabilities with PC • Several power supply options • Optional battery for uninterrupted testing
  8. 8. STT ONE <ul><li>OTN and Next-Generation SDH/SONET Testing </li></ul><ul><li>OTU1 and OTU2 testing </li></ul><ul><li>ODU Time Division Multiplexing testing </li></ul><ul><li>(ODU1 into OPU2 mapping) </li></ul><ul><li>Ethernet over SDH/SONET testing (RFC2544 , IP Ping) </li></ul><ul><li>VCAT/LCAS testing </li></ul><ul><li>GFP-F/T testing </li></ul><ul><li>Legacy SDH/SONET testing </li></ul><ul><li>PDH/T-carrier testing </li></ul>
  9. 9. STT 40G <ul><li>43G OTN and 40G SDH/SONET Testing </li></ul><ul><li>SONET OC-768 and SDH STM-256 Testing </li></ul><ul><ul><li>Payload mapping: Concatenated STS-768c or VC4-256c down to VT2, VT1.5, VC12, VC11 </li></ul></ul><ul><li>OTN OTU3 Testing (43.018414 Gbit/s) </li></ul><ul><ul><li>ODU-2 to ODU-3 and ODU-1 to ODU-3 mapping </li></ul></ul><ul><ul><li>SDH / SONET payload, synchronous and asynchronous </li></ul></ul><ul><ul><li>Access to OPU, ODU and OTU overhead bytes </li></ul></ul><ul><li>1550nm for 40/43G </li></ul><ul><li>10/10.7G Drop/Insert port </li></ul><ul><ul><li>Pluggable XFP to drop/insert 10G SDH/SONET and 10.7G OTN payloads to/from STT ONE, STT NAM, SS10G+, or other external sources </li></ul></ul><ul><ul><li>Currently available in 1550nm </li></ul></ul><ul><li>Familiar Windows® User Interface </li></ul><ul><ul><li>Same look and feel as STT-ONE and STT-NAM </li></ul></ul><ul><li>TL1 for Scripting and Automation </li></ul>
  10. 10. STT Metro <ul><li>Test Modes and Applications </li></ul><ul><li>Throughput </li></ul><ul><li>BERT </li></ul><ul><li>Loopback </li></ul><ul><li>RFC 2544 </li></ul><ul><li>RFC 2889 </li></ul><ul><li>IP Test </li></ul><ul><li>Monitor Mode </li></ul><ul><li>Flooding </li></ul><ul><li>Packet Capture & Decode </li></ul><ul><li>Next Generation of Ethernet Testing </li></ul><ul><ul><li>4- or 8-Port Configuration </li></ul></ul><ul><ul><li>65 mm Chassis </li></ul></ul><ul><ul><li>10/100/1000BASE-T Electrical Ports </li></ul></ul><ul><ul><li>SFP Ports for 1000BASE-X and 100BASE-FX </li></ul></ul>
  11. 11. STT 10G Ethernet Powerful Multi-Port Testing up to 10Gbps • Full line rate traffic generation for Ethernet up to 10 Gigabits, LAN (10.3 Gbps) & WAN (9.95 Gbps) • Multi-port and multi-rate capability for network element pre-qualification testing • RFC 2544: Throughput, latency, frame loss, and back-to-back tests* • BER testing at Layer 1, Layer 2, and Layer 3 (IP) for Gigabit Ethernet and IP services with received measurement filter • IP verification with Ping, Trace Route, Echo Response, and IP Throughput across a routed network • Class of Service (CoS) (via VLAN P-bit) and IP Type of Service (TOS)/DSCP traffic prioritization settings • Fibre Channel buffer-to-buffer credit management • Bidirectional monitoring of live Ethernet networks • Packet capture & decoding up to Layer 7 • Control/Respond Loopback feature to loop-up/down a far end STT or MTT * GigE & 10GbE only
  12. 12. STT xWDM OSA, Wavelength Converter, Wavelength Drop • Economical 3-in-1 test tool: wavelength converter, channel drop, and OSA • TLS with wavelength conversion (C and L-Bands) • Wavelength drop to isolate any single wavelength and drop it to a network analyzer • OSA, OSNR, power level, frequency, channel number, and more • Dual ports for simultaneously testing multiple input signals • ROADM: full band OSA, set, measure, analyze and save data for 40 individual channels in just eight minutes
  13. 13. STT DTM CD and PMD Measurements The STT DTM (Dispersion Test Module) gives network planners a cost-effective tool to analyze new and existing fibers for their dispersion characteristics in order to determine if those fibers can support higher transmission bit rates and DWDM. Utilizing high sensitivity and high-speed photon counting detection technology, it measures both Chromatic Dispersion (CD) and Polarization Mode Dispersion (PMD) according to ITU-T recommendations.
  14. 14. Stand Alone Platform Solutions
  15. 15. Transmission
  16. 16. SunSet 10G A complete STM-64/OC192 test set • 1.5/2 Mbps up to 10 Gbps (OC-192/STM-64 ) • OC-1/3/12/48 (STM-0/1/4/16) single and dual wavelengths: 1310 nm and 1550 nm • SONET/SDH transmission: BERT, overhead byte analysis and control, pointer monitoring and adjustment, APS timing, ITU-T performance monitoring • T-carrier/PDH transmission testing with electrical ports • RS-232 c and Ethernet ports for remote operation • 5 lbs. (2.2 kg) and battery-operated
  17. 17. SunSet SDHc STM-16J SunSet SDH with Jitter and Wander • 1.5/2 Mbps to 2.5 Gbps (STM-16) • Single and dual wavelengths: 1310 nm and 1550 nm • SDH/PDH transmission testing: BERT, overhead byte analysis and control, pointer monitoring and adjustment, APS testing, tandem connection monitoring • Error performance analysis per ITU-T G.821, G.826 , G.828, G.829, M.2100, M.2101, M.2110 • SDH/PDH jitter generation and measurement • Wander generation and measurement • Service verification: ATM (T1/E1 to STM-16), VF, GSM, Frame Relay, ISDN, V.5x, and SS7 • RS-232 c and Ethernet ports for remote operation • Pulse Mask Analysis at 1.5 Mbps, 2 Mbps, 34 Mbps, and 45 Mbps • Under 4 lbs. (1.8 kg) and battery-operated
  18. 18. SunSet E20c SunSet E20c the 2M Test Set • Dual E1 transmit and receive • E1 measurements including frequency/level, BERT, G.821/G.826 /M.2100, and pulse mask • Datacom testing at V.35, X.21, RS-232 sync/async, RS-449, G.703 codirectional interfaces • ITU-T compliant jitter measurement and generation • VF measurement and generation • Service verification: SS7, GSM, GPRS, Frame Relay, V.5x, ISDN, X.25, R2 • 3 lbs. (1.3 kg)
  19. 19. SunLite E1 Pocket-size E1 unit • Single E1 transmit and receive, plus clock input • E1 measurements including frequency/level, BERT, and G.821/G.826 /M.2100 • VF measurement and generation • Configuration and measurement storage • 0.8 lb (0.4 kg)
  20. 20. Ethernet
  21. 21. SunLite GigE SunLite GigE & GigE Responder * • Full 10/100 Mbps and Gigabit Ethernet (1000 Mbps) line rate traffic generation • Performs throughput, latency, frame loss, and back-to-back tests per RFC 2544 • BER testing at Layer 1, Layer 2, and Layer 3 (IP) for Gigabit Ethernet and IP services • IP verification with Ping, Trace Route, and IP Throughput across a routed network • Generate up to 8 traffic flows with different MAC address, VLAN tags, MPLS, IP address, payload and bandwidth configurations • Class of Service (CoS) (via VLAN P-bit) and IP Type of Service (ToS)/DSCP traffic prioritization settings • 10/100/1000BASE-T and 1000BASE-X dual media test interfaces • Control/Respond Loopback feature to loop-up/down a far end STT, MTT Ethernet test modules or GigE Responder • Test Profiles for fast and efficient test set configuration and operation * Same size low cost loopback device only
  22. 22. Cable TV
  23. 23. CM1000 Analog and Digital SLM and DOCSIS ® Network Analyzer • Full analog/digital SLM with cable modem testing plus digital video tests including: MER, BER and constellation • Deep interleave, BPI+ with manufacturer certificates and SNMP are standard features • VoIP option for verifying and testing VoIP network services, QoS voice and best effort signaling. Includes MOS, R-Factor, lost packets, latency and jitter • Web browser option for web-based applications such as workforce management • Proprietary BkER test characterizes the upstream path without a headend unit • Plug-in modules include a 16 QAM Upstream Signal Generator and TDR options • CM1000 supports Annex B and Annex C
  24. 24. CM4000 Cable Explorer - TDR (Time Domain Reflectometer) Module • TDR functions: – Distance, cable loss, return loss, and total loss measurements – Auto-test or manual-test mode * CE4000 TDR Module in place with the CM1000
  25. 25. CM2000 Cable Modem Network Analyzer • Up to 30 Mb/s throughput • Customizable verification and troubleshooting capabilities • Validates networks capacity for increased bandwidth and high QoS demands of next-generation services • Easy-to-use interface and best display of any instrument in its class • Open architecture provides flexibility for future service requirements • Windows CE® operating system offers user familiarity and flexibility for future expansion • Internet Explorer® browser provides web access to back office and diagnostic systems • PC emulation and Ethernet testing tools eliminate the need for PCs in the field
  26. 26. AT2500RQv <ul><li>Spectrum Analyzer with Combined CATV, QAM, and Video Measurement Capabilities </li></ul><ul><li>Enhanced CATV spectrum analysis from 4 Mhz to 1.5Ghz </li></ul><ul><li>Flexible, mobile digital analyzer to test upstream and downstream paths </li></ul><ul><li>Contains built-in band pass filter to increase dynamic range </li></ul><ul><li>Enables technicians to perform all headend and field tests without carrying an external band pass filter </li></ul><ul><li>Supports testing for Annex A, B, C, and PAL systems </li></ul><ul><li>Mitigates upstream and return path problems when combined with Sunrise Telecom CM1000 with USG module </li></ul><ul><li>Complete set of test requirements for semi-annual FCC performance report< </li></ul>
  27. 27. AT2500HMQ <ul><li>Rackmount CATV/QAM Spectrum Analyzers </li></ul><ul><li>Monitors forward and reverse paths within 5 MHz to 1.5 GHz frequency range </li></ul><ul><li>Remote accessibility from any Ethernet network connection </li></ul><ul><li>Controls up to 16, 16 port switches for a total of 256 ports remotely </li></ul><ul><li>Troubleshoot analog and digital measurements problems from your office or on the road </li></ul>
  28. 28. Thank you! Alin Dinca Telecom Sales Engineer

×