Face Recognition Device F710

FACE RECOGNITION SYSTEM F710

Presentation Overview
Device Overview
Face Recognition Technology
Package Contents
Device Familiarization
Turning the Device ON
Administrator Registration
User Registration
User Verification
User Guide
Management Software
Device Performance
Specifications
Contact Us

Device Overview Time Attendance Access Control User Identification

Time Attendance Access Control User Identification The device can mark attendance time of users The device can be connected to an electric door lock & configured in a manner that it opens only after a successful user verification The device can scan the face of a user and find his identity records saved in its database.

Face Recognition Technology
There are two technologies behind face recognition being used today- 2D & 3D technologies. 2D technology uses plane projection of actual faces & is affected by environment light, facial expression etc. 3D technology is more accurate but has the cons of being very expensive, complex algorithms, requiring more storage & slow recognition.
The technology used in F710 is called ‘Dual Sensor’ which combines the advantages of both 2D & 3D technologies. It uses two special cameras which are just like a person’s eyes. The technology has fast recognition speed & high accuracy. Below given is the pictorial representation of ‘Dual Sensor’ technology.

Package Contents Product box User guide Power adaptor Installation CD RFID card F710 device

Device Familiarization – Front View Touch keypad IR lights TFT color LCD Cameras Area for swiping RFID card

Keypad Backspace Menu Up selection Down selection Escape Enter/OK

Back View Door connection terminal SD card inserting slot Loud speaker

Back View Power adaptor port Network cable port

Bottom View USB port

Power Adaptor To be connected to the device To be connected to AC supply Adaptor specifications. Input: 110-240V AC 1A 50-60HZ Output: 12V 3A

RFID Card The RFID card can be used for user verification

Management Software CD The management software can be installed on a PC using the installation CD provided

User Guide The user guide contains all details regarding the system

Turning the device ON Connect the power cable to the power adaptor port at the back side of the device Connect the other end of the power cable to AC supply Now the device will turn ON automatically

Administrator Registration
The first step in the operation of the device is the administrator [admin] registration. Only admin has the option to control the device & manage the records. Up to 5 admins can be registered in the device.
To start with, after turning the device on, press MENU. Now the following prompt will appear.
Press 1 on the touchpad to set admin Press 1 to set the first admin

Now the device will start the admin registration process.
Make sure that the device is kept at a distance of 50-80 cm from the face at the time of registration and verification.
Follow the instructions on the screen to complete the registration.
The system will ask ‘Register as User?’ Press OK if the admin is to be registered as a user too. Press ESC if that is not required.
After successful registration, the confirmation message will be displayed on the screen.
For admin verification, press MENU in stand by. A green circle and a scanning brush will appear on the screen. Keep the face in such a manner that the brush can scan it properly, at the proper distance mentioned above. Once successfully verified, the Functions Menu will appear on the screen.

User Registration
Only admin can register, modify or delete users.
Press MENU for admin verification. After successful verification, Functions Menu will appear. Now proceed in the following manner.
Press 2 to select user management Press 1 to select register user Input user number. It can be in the range 1-99999999

After successful user registration, a confirmation message will be displayed on the screen.
Input user name. It can be up to 18 characters long. Press ESC to toggle between small & capital letters Select any one of the four available verification options Face: Normal user Card: Temporary user Pin and Face & Card and Face: High security level

User Verification
The system automatically detects a face when it appears in front of the camera.
Adjust the face so that a green square is seen blinking on the screen. This denotes that the system is attempting to verify the face. If it doesn’t appear, then adjust the face properly. You may be too far from or too near to the device.
The device may show messages like ‘Adjust Your Actions’. This can happen if the face is not steady or facial expressions need to be adjusted.
After successful user verification, voice prompt gives a voice message ‘access granted’.
If a face is unknown to the system, it gives the message ‘access denied’ via the voice prompt.

User Guide
The user guide provided along with the system, in printed & word document formats, give all details regarding device configuration, installation, admin/user management, system settings, record management etc.
Exit full screen view of this presentation, right click here & select open document to view the user guide

Management Software
A management software comes along with the system which can be installed on a PC using the installation CD provided. It can be used for a variety of functions including staff management, device management, work shift settings, data import/export etc.
The default language of the software is Chinese. Follow these instructions to change it to English.
Open the software Enter ‘admin’ in both fields Find a white question mark, click on it to select English as default language

Device Performance
The device is highly accurate & dependable. Still, keeping in mind the following points will aid in better device performance.
The system doesn’t have an inbuilt battery. So connect it to an uninterrupted power supply. In cases of uneven light conditions [more light on one side of face] or low light conditions, the system responds correctly. But in no light conditions [total darkness, only IR light from the device is available] the system may reject a valid user at first but on multiple attempts, he will be recognized successfully. At the time of user registration if a user wears spectacles and if he comes to the system without spectacles later, the system still successfully recognizes him. But this doesn’t work with sun glasses.

In the system, data is stored in an SD card, which can be directly connected to PC via a card reader to export data directly PC. SD card The system has the facility to connect with a USB storage device. Data including attendance logs, user list etc can be imported from and exported to USB device in the form of .txt files.

Specifications

Contact Us
BioEnable Technologies Pvt. Ltd. 2nd Floor, The Avenue, Pune-Solapur Road, Hadapsar, landmark: Opp. Mega Center, Pune 411028 MH, India
Toll free: 1800-209-2131 (only from India)
International Sales: +91-9326170554 or +91-9373336478
Others call : +91-20- 26810214
Fax: +91-20-30225587
email: [email_address] (Sales Worldwide) [email_address] (Support Worldwide) [email_address] (Accounts Worldwide)

http://video-door-phone.bioenabletech.com	46
http://www.slideshare.net	14

Face Recognition Device F710

by BioEnable on Apr 03, 2010

Accessibility

Categories

Tags

Upload Details

Usage Rights

2 Embeds 60

Statistics

Face Recognition Device F710 — Presentation Transcript