About AkkuFresh ®AkkuFresh® raises the portable device battery's charging ability helps to maintain an optimal battery life and accelerates the charging time. AkkuFresh® regenerates any worn or deteriorated battery.AkkuFresh® is easy to use and installed by the user. It is a small (29 mm x 50 mm / 1.14 in x 1.97 in) rectangular foil which is installed in seconds by the user (attached or place to the battery).Specifically created for modern portable devices. Old and new rechargeable Li-Ion and Li-Polymer batteries can benefit from AkkuFresh®.

Made in JapanAkkuFresh® is a Japanese, it’s compatible with any portable devices withLithium Ion and Lithium Polymer battery and has been tested by Europeandistributors and GSM service providers like Vodafone and Telenor ASA.From 2007 sold under the brand name of AkkuFresh® worldwide. More than 600’000pcs have been sold!Hiroshi Katayama

Benefits• Raises battery's charging ability• Offers more talk time and a longer stand-by-time.• Shortens charging time up to 40% / Reduces the charging frequency.• Recovers worn or deteriorated batteries. / Restores the original performance.• Stops further battery deterioration.• Prolongs the total battery life span with up to 30% longer lifetime (total charging cycles).• Protects the battery from electrical variations by regulating and filtering the current.• Installed in seconds. • Saves money by delaying the need to purchase new batteries.

Tests Results - Battery Regeneration

CompatibilityAkkuFresh® is compatible with any portable devices with Lithium Ion and Lithium Polymer battery and has been tested by distributors with:compatibilitycompatibilityLithium-IonLithium-PolymerNi-CodiumNi-MethalAkkuFresh®’s effect performance depends on several factors:Type of mobile phone, brand, model – type of battery, age, status (total amount of charging-discharging cycles), external temperature, environmental conditions and cellular network.(1) All brand names are registered trade marks and the properties of their respective owners.

Technology OverviewAkkuFresh® is based on IonXtra, a new exclusivelydeveloped nanoceramic material (nanosized ceramicpowders), resulting from years of laboratory research.The product is under PCT since 2004.Ion-Power made from nanosized ceramic material a powder of a natural mineral (microporous crystalline solids). Ion-Power contains Titanium oxide (Ti), Manganese oxide (Mn), Iron oxide (Fe), Aluminium oxide (Al), Silica oxide, Zinc (Zn), Calcium (Ca) - Chlorine (Cl), Potassium (K), Magnesium (Mg) and other components.

AkkuFresh® - Structural set-upProtective layerSilk printProtective paintIon-Power materialConductive layerBase film (silicone)AdhesivePaper (peel off)Battery

AkkuFresh® is designed toBatteryElectromagnetic field (EMF)Energy released byElectron holesVibrationSubstrate (oxide) Ion-Power material• Absorb, modify and reflect the electromagnetic field (EMF), generated by the battery.• Generate a flow of negative ions. • Interact with the battery’s internal electrolyte and ions through the battery’s case.

Degeneration of a Rechargeable BatteryA lithium (Li) battery consists of a negative electrode, which is called the anode, and apositive electrode called the cathode. In between the anode and cathode is the electrolyte. The ions (charged atoms) flow through the electrolyte to create its power.The cathode is usually made of a metallic compound, for example lithium cobalt oxide orlithium manganese oxide. Whatever is used must be able to release Li ions easily.The anode is made of lithium bound to a materials such as graphite or other carbons. Theelectrolyte is made of a material similar to the cathode in order for the ions to flow. When the battery is supplying energy, the Li ions from the cathode consisting of a metalliccompound flow through the electrolyte and into the anode. The Li ions have a positivecharge.While the Li ions flow, electrons will flow through. The load from the anode tothe cathode, but not through the electrolyte. The electrolyte only allows ions todiffuse through it. The battery charge / discharge process is operated by the repetitive flow movement of ionsbetween electrodes. By the process of repetition and the electrode oxidation, the batteryperformance, charging capacity and battery life are progressively reduced.

Loss of capacity during rechargingChargingDischargingBattery is connected to a charge (power source).Positive electrode (cathode) is oxidized.Electrons flow through the outer circuit to negative electrode.Li+ ions float through the electrolyte to negative electrode.Electric circuit is closed.Li+ ions are incorporated into the negative electrode.Battery is connected to a load (resistance).Negative electrode (anode) is oxidized. Electrons flow through the resistance to positive electrode.Li+ ions float through the electrolyte to positive electrode.Electric circuit is closed.Li+ ions are incorporated into the positive electrode.DischargingChargingOld batteryCurrentCurrentLoadChargeSeparator with crystalsAnodeAnodeAnodeCathodeCathodeCathode(Resistance)(Power source)Electrolyte (Polymer)Electrolyte (Polymer)Electrolyte (with oxidation) Li+transfer reduced

Battery is connected to a load (resistance).

Negative electrode (anode) is oxidized.

Electrons flow through the resistance to positive electrode.

Li+ ions float through the electrolyte to positive electrode.

Electric circuit is closed.

Li+ ions are incorporated into the positive electrode.

Atomic structure inside the cathode of a Li-Ion batteryFully charged Mn2O4 -> Fully oxidizedFully Discharged Li1Mn2O4 -> Mn Completely Reduced

Atomic structure inside the cathode of a Li-Ion batteryAfter several charging cycles, batteries progressively lose their performance because the electrical elements efficiency decreases and the internal chemical transfers are reduced by the effects of crystalline formation caused by the oxidation (inter-metallic compound) which create extra resistance that cause the degeneration of a battery.The separator, a metal that is shared by both chemistries, is responsible for this crystalline formation, creating crystals with sharp corners that may pierce the separator, which can lead to increased self-discharge or an electrical short. The crystals grow and drastically reduce the surface area. The result is a voltage depression, which leads to a loss of capacity. In advanced stages, the sharp edges of the crystals may grow through the separator, causing high self-discharge or an electrical short.The ion's flow is no longer operating correctly, thereby reducing battery life.The heat due to charging-discharging cycles and the movement and accumulation of ions to the electrodes causes a mechanical alteration in volume (expansion + contraction) for a approximate value of 7-9% of the total volume. Incorporation and removal of Li-ions (approx. 0,12 nm) at electrodes causes the alteration in volume (expansion + contraction). The mechanical stress causes the partial decomposition of the electrodes and metal particles float within the electrolyte. These particles cannot be ionized by normal battery function anymore and are lost as charge carriers.

AkkuFresh® Principle and AssumptionThe energy released from the electron holes inside the mineral powder can send out a 3-4µm electronic vibration wave. The vibration wavelength released from AkkuFresh® is considered to be within almost the same range with the oscillation frequency of ions inside the battery. By receiving an electrons wavelength from AkkuFresh®, these molecules are able to raise their oscillation energy and electricity generation which result in a voltage increase.

After few cyclesAfter more cyclesSeparator with less crystalsNo crystalsCathodeAnodeAnodeCathode• AkkuFresh® contains material, which is able to directly affect the molecule level inside the battery. Uncharged metal particles within the electrolyte are reintegrated into the electrical circuit. • AkkuFresh® reduces electrical loss by optimizing the ions transferred between the battery cells and maintaining a stable voltage. • AkkuFresh® emits a ultra high-speed vibration frequency that dissolves and helps to prevent the crystalline formation caused by the oxidation, so the electrons can move freely between the anode and cathode and the battery regains its original the strength.• AkkuFresh® improves the electrolytic conductivity for a greater flow of ions (lower amount of uncharged particles do not hinder the ion flow within the electrolyte). Higher amount of charge carriers ("lost" metal particles are "reactivated" as charge carriers).>>

>>• AkkuFresh® unblocks and regulates the flow of ions by generating an electro-magnetic cavity and oscillation frequency with negative ions emission. The ionization generated by AkkuFresh® has been measured as a level reaching 30 times the value (6000 - 9000 Ions/cm3) of the ambient air ionization (200 - 300 Ions/cm3). By the ions production, AkkuFresh® improves the electrodes oxidization. • Far-infrared rays (4 to 1,000 µ) are also emitted from AkkuFresh®. By stimulating micro-vibrations, generating heat and penetrating the battery casing, far-infrared rays causes a thermal reaction (by causing the molecules to rapidly vibrate against each other) that maintains the optimal battery temperature.• AkkuFresh® helps the battery to maintain its optimal temperature, increases the voltage and maintain the charge for a longer time.• The ions inside the Li-Ion battery are reactivated and excited by the interaction between AkkuFresh® and the magnetic field of the battery. A current-carrying conductor is surrounded by a magnetic field proportional to it. The current passing through the battery also builds up such a magnetic field. Due to varying operating states of the device and thus varying currents, magnetic fields of different intensity are built up around the battery.These magnetic fields induce a varying current in AkkuFresh®, which in turn builds up a varying magnetic field around itself. The interaction resulting from these two magnetic fields enriches and excites the ions inside the battery. A greater number of free, well flowing ions in the battery results in a greater battery capacity.

Results• Used batteries thus can be regenerated by activation of additional ions and by reactivation of inactive ions.• The charge exchange in the battery at which the ions play the most important part is re-established. New batteries are effectively protected against ageing by AkkuFresh®, because a sufficient number of free ions are always available.• The charge exchange in the battery at which the ions play the most important part is always ensured. Depending on the type of construction, the regeneration needs more or less cycles. With prismatic cells it will take around 10 cycles, with cylindrical it takes around 30 cycles.AkkuFresh® starts its effect on the battery just after installation and users will notice an increase in battery life and charging speed, after 5 to 10 charging cycles.

Proof of Negative Ions EmissionSmart Ion Monitor ITC-201a INTI, Smart Ion Monitor ITC-201a INTI + ITS-801aТеst:Duration: 25 sec.Тemperature / Humidity:25°C (77F) / 54%Negative ions / cm3: 0 > 1,474 (Теst 1)0 > 1,983 (Тest 2)0 > 2,139 (Тest 3)Positive ions / cm3:0 > 0,288 (Теst 1)0 > 0,186 (Теst 2)0 > 0,212 (Теst 3)The test shows that AkkuFresh® material produces negative ions.AkkuFresh® material was tested with an INTI Smart Ion Monitor model ITC-201a.You can find more information about the Smart Ion Monitor at:http://www.satotech.com/Eitc-201a_.htm

Technology TestTechnology TestAkkuFresh®material has been tested and documented by several prestigious institutions, laboratories and universities.Biokarma Ltd. is also processing performance tests with several US and European universities, independent testing laboratories and battery technology centers for full evaluation and analysis with mobile phones and electronic devices batteriesAkkuFresh® regenerates the battery and help to recover the original performance, maintains the maximum capacity, reduces the charging time and extends the life span. All the following tests are processed with used (6 month old) batteries.NOTE:It is very important to understand that AkkuFresh®is not designed to extend the battery life of a brand new battery!

Tests Results Battery Life - Charging SpeedBattery Life Test Stand by TimeWithoutWithVoltsTime (minutes)

Tests Results Battery Life – Continuous Talk TimeBattery Life Test Continuous Talk TimeWithoutWithVoltsTime (Minutes)

Tests Results Battery Charging SpeedWithoutBattery Charging SpeedWithVoltsConstant CurrentConstant VoltageCharge CurrentBattery / VoltsEnd of ChargeEnd of ChargeTime (minutes)

Tests Results Battery Discharge at -20CWithoutBattery Discharge –20CWithVoltsCapacity (mAh)

Tests Results - Battery RegenerationOld BatteryCycle 1Old BatteryNew BatteryCycle 2Cycle 3Cycle 4• AkkuFresh® regenerates a worn battery and helps to recover the original battery life and charging ability.Comparative test between two identical Ni-Cd batteries (same manufacturer, same model). Battery life time (Battery with AkkuFresh®) is measured after each cycle against the brand new battery life time. Battery (1) is brand new - Battery with AkkuFresh® (2) is 6 months old.

Tests Results - Summary• AkkuFresh® increases the battery life stand-by time up to 38-47% (168h 30min > 230h 25min after 11 days).• AkkuFresh® increases the battery life talk time up to 49% (Continuous talk time from 1h 30min to 2h 40min after 10 cycles). • AkkuFresh® increases the charging speed up to 66% on Li-Po (31% nominal w/ Li-Ion).• AkkuFresh® begins to improve the battery performances after several charging cycles (4-6 charging cycles minimal - 50 charging cycles nominal - 150th cycle maximal). The effect is visible after 5-7 cycles. After 350 cycles, the capacity ratio vs. min capacity is 64.9% with AkkuFresh®.• AkkuFresh® has battery life improvement on low temperature characteristics - Capacity at 0.5˚C (32.9˚F) - Discharge at -20˚C (68˚F) is 206.6mAh with AkkuFresh® vs.134,4mAh without AkkuFresh®. Capacity ratio vs. 780mAh is 26.5% with AkkuFresh® vs.17.2% without.• AkkuFresh® reduces the battery's internal impedance and resistance. By these facts, the temperature of the battery is also reduced.• AkkuFresh® helps to maintain the charge on the last 3-5 hours of use.

Tests Results - Battery RegenerationVoltsWithout AkkuFresh®With AkkuFresh® (>+-10 ciklus)168h 30m230h 25mTimeResults: A recovered battery life after few cycles.

A Simple and Interesting TestUse a wall clock with a battery that recently died (rechargeable or AA/AAA Li Ion battery).Remove the battery.Attach AkkuFresh® all around the battery.Re-install the battery.5. You will be surprised to see the wall clock re-starting again.This simple test shows how AkkuFresh® can regenerate a deadalkaline (or rechargeable) battery, additionally AkkuFresh® can extendthe battery life of virtually any battery.AkkuFresh®’s effect performance depends on several factors:Type of mobile phone, brand, model – type of battery, age, status (total amount of charging-dischargingcycles), external temperature, environmental conditions and cellular network.(1) All brand names are registered trade marks and the properties of their respective owners.

Get Your Profit too! More and more importers, business ventures, mobile service providers and distributors recognise the opportunity in AkkuFresh®. Also very important viewpoint that this is a Japanese“GREEN” product.

International RecognitionsIn the end of 2008 our company received a great recognition letter from the Telenor ASA company (related to Pannon GSM) after the first 10’000pcs of AkkuFresh® had been sold.

Please visit our product website where you can find more information:http://www.akkufresh.com Please contact our international network of authorized retailersif you have any questions.

Thank you for your attention