• Save
Exp pcb intro_wkb_rus
Upcoming SlideShare
Loading in...5
×
 

Exp pcb intro_wkb_rus

on

  • 859 views

 

Statistics

Views

Total Views
859
Views on SlideShare
858
Embed Views
1

Actions

Likes
0
Downloads
0
Comments
0

1 Embed 1

http://www.slideshare.net 1

Accessibility

Categories

Upload Details

Uploaded via as Adobe PDF

Usage Rights

© All Rights Reserved

Report content

Flagged as inappropriate Flag as inappropriate
Flag as inappropriate

Select your reason for flagging this presentation as inappropriate.

Cancel
  • Full Name Full Name Comment goes here.
    Are you sure you want to
    Your message goes here
    Processing…
Post Comment
Edit your comment

Exp pcb intro_wkb_rus Exp pcb intro_wkb_rus Document Transcript

  • Expedition PCB .
  • 1 ..................................................................1-1 Expedition PCB..................................................................1-2 (Partitions)...............................................................................1-3 .............................1-4 (Library Manager)..............................................1-5 (Tools) Library Manager................................1-6 .................................................................................................1-7 (Partition Editor)....................................................1-8 Library Manager..............................................................1-9 ................................................................1-10 ...........................................................................1-11 2 (Padstacks)...............................................2-1 ?..................................................................2-2 Padstack Editor.......................................................................................2-3 (Holes)..................................................................................2-4 (Pads)...................................................................................2-6 ...................................................................................2-8 Custom Pads & Drill Symbols...............................................................2-12 ...........................................................................2-13 3 (Cells)..........................................................................3-1 Cells?....................................................................................3-2 Cell Editor...............................................................................................3-3 Cell............................................................................3-5 ....................................................................3-11Expedition PCB v
  • ( ) .......................................................................................3-12 ...........................................................................3-13 4 (Parts)........................................................................4-1 Parts?.....................................................................................4-2 PartsDB Editor.........................................................................................4-4 Part.........................................................................................4-5 (Pin Mapping)..................................................4-6 .............................................................................4-7 Logical.....................................................................................4-8 ............................................................................4-9 (Cell)......................................................................4-10 .................................................................................4-11 Physical................................................................................4-12 (Supply and NC)..............4-13 ............................................................................4-14 5 (Layout Templates)........................5-1 ?.............................................................5-2 ......................................................5-3 ...............................5-5 ......................................................5-6 .............................................5-8 (Library Services)..................................................5-9 ............................................................................5-10vi Expedition PCB
  • ( ) 6 .........................................................6-1 ................................................................6-2 ..............................................6-3 (Mouse Strokes)..........................................................6-4 (Display Control).............................................6-5 Display Control — Layer ( ).............................................................6-6 Display Control — General ( )......................................................6-7 Display Control — Part ( ).....................................................6-8 Display Control — Net ( )................................................................6-9 Display Control — Hazard ( ).......................................................6-10 ....................................................................6-11 ............................................................................6-12 ........................................................................................6-14 (Draw Objects)...................................6-15 (Highlighting) ...................................................6-16 .........................................................6-17 (File Viewer)....................................................6-18 (Help)..................................................................6-19 (SupportNet).............................................................6-20 ..............................................................................6-21 (Service Request)....................................................6-23 ...................................................................................6-24 7 ....................................................................7-1 ...................................................................................7-2 Expedition PCB.......................................7-3 (PCB Job).....................................................7-4 DxDesigner............................................................7-7Expedition PCB vii
  • ( ) Design Capture.......................................................7-8 .........................................................................7-9 ..................................................................................7-10 (Plane Layer)..................................................7-11 .................................................................................7-12 (Default Via)............................................................7-13 (Layer Stackup).................................................................7-14 (Editor Control)............................................7-15 (AutoSave)................................................................7-16 (Design Backup)........................................7-17 ............................................7-18 ..................................................7-19 ............................................................................7-20 8 .................................................................8-1 (Draw Mode)............................................................8-2 .............................................................8-3 .........................................8-6 ...........................................................8-7 (Board Outline)...........................................................8-10 ...............................................................8-12 (Route Border)..................................................8-14 (Mounting Holes)............................................8-15 (Board Origins)..........................................8-17 (Placement Obstructs)....................................8-18 (Route Obstructs).............................................8-19 ............................................................................8-20viii Expedition PCB
  • ( ) 9 .............................................................................9-1 Editor Control...............................................9-2 (Place) ..................................................9-3 .........................................................9-5 (Move) ...........................................................9-11 (Rotate) ...................................................................9-12 (Push)................9-13 .......................................................................9-14 (Color By Net)..............................................................9-15 ........................................................................9-16 , ......9-17 ...........................................................9-18 ............................................................9-19 (Back Annotation).............................................9-20 (Mechanical Cells)......................9-22 ...........................................................................9-23 10 ...................................................................10-1 (DRC).........................10-2 (Online DRC).................................................10-3 (Batch DRC)........................................................10-4 . (Connectivity and Special Rules).......10-5 Element to Element.......................................10-6 (Batch DRC Schemes)............................10-7 (Online DRC Hazards).......................10-8 DRC........................................................................10-9 .........................................................................10-12Expedition PCB ix
  • ( ) ...........................................................................10-13 .............................10-14 .......................................................10-15 (Design Status)........................................................10-16 ..................................................10-17 .........................................................................10-18 11 ......................................................................11-1 Editor Control — General ( )......................................................11-2 Editor Control — Routes ( )...............................................11-4 Editor Control — Pad Entry ( ).......................11-6 Editor Control — Grids ( ).............................................................11-7 Editor Control — Filter ( )...........................................................11-8 CES?....................................................................................11-9 CES ...................................................11-10 CES DxDesigner.........................................................11-11 CES Design Capture..................................................11-13 CES Expedition PCB..................................................11-14 CES Expedition PCB...........................................................11-15 CES .........................................................11-16 CES.............................................................................11-17 CES..................................................................................11-18 CES.....................................................................................11-19 .........................................................11-20 (Net Class).................................................11-21 Net Class.........................................................11-23 ..................................................................11-24 (Via Assignments)....................11-25 (Clearance Rule)....................................11-26 Class to Class.....................................................11-28 (General Clearances).............................11-29x Expedition PCB
  • ( ) (Scheme)..................................................................11-30 Expedition PCB............................................11-31 ...........................................................................................11-32 .........................................................................11-34 ...............................11-35 . (Differential Pairs).........................................................11-36 ...........................................................11-37 ..........................................................................11-38 12 .........................................................12-1 ..............................................................................12-2 - ...................................................12-3 — Plowing.( ).............................12-7 Plow........................................................................................12-8 Gloss ( )...........................................................12-10 ...........................................................12-11 ...............................................................................12-12 .....................................................12-14 ............................................................................12-15 (Pushing)..............................12-16 ...................................................................................12-17 ..................................................................12-19 (Teardrops)...............................................................................12-21 ..........................................................................12-22 13 ............................................................................13-1 ............................................................13-2 (Auto Route)..................................................................13-3Expedition PCB xi
  • ( ) Auto Route................................................................................13-4 .....................................................................13-5 ...................................................................13-6 ...........................................................................13-7 ...........................................................................13-8 ............................................................................13-9 14 ( )..............................................................14-1 .....................................................................14-2 .......................................................................14-3 ..............................................14-4 ...................................................14-5 ...............................................................14-6 ...............................................................14-7 ............................................................14-8 ..................................................................................14-9 .......................................................14-10 ...............................14-12 (Select List)......................................14-13 ..................................................................14-14 ................................................................14-15 ..........................................................................14-17 15 (Planes)......................................................15-1 Planes?.................................................................................15-2 ......................................................15-3 — Setup Parameters ( ).....15-4 — Clearances ( ).........................................15-5xii Expedition PCB
  • ( ) (Plane Shapes).............................................................15-6 Plane Shape.........................................................................15-7 Plane Shapes.....................................................................15-8 .............................................................................15-9 (Dynamic Area Fill)......................................15-10 ..................................................................................15-11 (Planes Processor).............................................15-12 ....................................................................15-17 ..................................................................15-18 (Routed Plane Pins).....................15-19 .............................................................15-20 ..........................................................................15-21 16 (Silkscreens)..............................................16-1 ?....................................................................16-2 Reference Designators.............................................16-3 Reference Designators................................................16-6 ..........................................................16-7 ............................................16-8 ..........................................................................16-11 17 Gerber Drill ( )....................................................17-1 ......................................................................17-2 (Gerber Machine Format).........................................17-3 ......................................................................17-4 .........................................................17-6 ...............................................................17-7 ...................................................17-8Expedition PCB xiii
  • ( ) NC Drill.................................................................................................17-9 Drill Chart ( )........................17-11 .........................................................................17-12 18 ...................................................................18-1 (Dimensioning).........................................................18-2 ............................................................18-3 ............................................................18-4 .......................18-6 ..........................18-7 ......................................................18-8 ....................................................18-9 X-Axis .........................................18-10 ..............18-11 .................................18-12 ...............................................................18-13 (Drawing Cells).................................................18-15 DXF......................................................................................18-16 ..........................................................................18-18 A (Net Classes and Clearances)...................A-1 ........................................................................................A-2 ..................................................................................... -6 ........................................................................................A-7 ...........................................................................................A-8 . .............................................................................................A-9 .........................................................................................A-10 (Stubs)...........................................................................A-12xiv Expedition PCB
  • ( ) ..............................................................................A-13Expedition PCB xv
  • 1 : • • Library Manager •Expedition PCB 1-1
  • Expedition PCB ♦ Expedition PCB : * ( ) * ( ) : (PDB) * (PDBs) - - * (Cell ) (Symbol) - - - (Padstack) * (Pads) - (Holes) 1-3 • Expedition PCB : 2007 :1-2 Expedition PCB
  • (Partitions) ♦ ! , . ! PDB. – PDB . ! . – . ! . – . ♦ . 1-4 • Expedition PCB : 2007 :Expedition PCB 1-3
  • ♦ ( , master-DC). ♦ . ! , , . . ♦ PDB (.lmc). ♦ Library Manager. 1-5 • Expedition PCB : 2007 :1-4 Expedition PCB
  • (Library Manager) Library Manager Library Manager . Library Manager : " , " " , " Library Manager Windows Start, Setup > Library Manager Expedition PCB. 1-6 • Expedition PCB : 2007 :Expedition PCB 1-5
  • Library Manager , Cell Editor . Cell Editor 1-7 • Expedition PCB : 2007 :1-6 Expedition PCB
  • (Partitions) : " " " " IBIS 1-8 • Expedition PCB : 2007 :Expedition PCB 1-7
  • Partition Editor ( ) Partition Editor : " . " New. " . " OK Apply. Partition Editor , . 1-9 • Expedition PCB : 2007 :1-8 Expedition PCB
  • Library Manager File Viewer Parts Manager ( ) ( ) Partition Editor Part Editor ( ) ( ) Partition Search Paths Cell Editor ( ) ( ) Library Services Padstack Editor ( ) ( ) Property Definition Editor Symbol Editor ( ) ( ) IBIS Librarian Reusable Blocks Editor ( IBIS) ( ) Visual IBIS Editor Layout Template Editor ( IBIS) ( ) " " Library Manager . 1-10 • Expedition PCB : 2007 :Expedition PCB 1-9
  • 1-11 • Expedition PCB : 2007 :1-10 Expedition PCB
  • ♦ . ! . – Library Manager. 1-12 • Expedition PCB : 2007 :Expedition PCB 1-11
  • 2 : • , • , Padstack EditorExpedition PCB 2-1
  • ? Thru-Hole ( ) SMD ( ) 2-3 • Expedition PCB : 2007 :2-2 Expedition PCB
  • Padstack Editor :" Pads ( )" Holes ( )" Drill Symbols ( )" Padstacks ( ) 2-4 • Expedition PCB : 2007 :Expedition PCB 2-3
  • Holes New Hole ( ) Copy Hole ( ) Sort Hole ( ) Undo Delete ( ) Delete Selected Hole ( ) 2-5 • Expedition PCB : 2007 :2-4 Expedition PCB
  • ( ) Holes ( ) +/-. 2-6 • Expedition PCB : 2007 :Expedition PCB 2-5
  • Pads 2-7 • Expedition PCB : 2007 :2-6 Expedition PCB
  • ( ) Pads ( ) 2-8 • Expedition PCB : 2007 :Expedition PCB 2-7
  • Padstacks Padstack: " Fiducial ( ) " Mounting Holes ( ) " Pin SMD ( ) " Pin Through ( ) " Via ( ) " Shearing Hole ( FablinkXE) " Tooling Hole ( FablinkXE) New Padstack ( ) Copy Padstack ( ) Sort Padstack ( ) Undo Delete ( ) Delete Padstack ( ) 2-9 • Expedition PCB : 2007 :2-8 Expedition PCB
  • ( ) PadStacks ( ) Padstack Through Pins, Vias Mounting Holes 2-10 • Expedition PCB : 2007 :Expedition PCB 2-9
  • ( ) Padstacks ( ) padstack 1. . 2. 3. . 4. . Pin-Through, Vias, Mounting Hole. 2-11 • Expedition PCB : 2007 :2-10 Expedition PCB
  • ( ) Padstacks ( ) . , Gerber , . 2-12 • Expedition PCB : 2007 :Expedition PCB 2-11
  • & Custom Pads & Drill Symbols New Custom ( ) Pad Copy Custom ( ) Pad Sort Custom Pad ( ) Undo Delete ( ) Delete Custom Pad ( ) 2-13 • Expedition PCB : 2007 :2-12 Expedition PCB
  • ♦ . ! . – . 2-14 • Expedition PCB : 2007 :Expedition PCB 2-13
  • 3 : • Expedition PCB • Cell EditorExpedition PCB 3-1
  • ? : " Package Cells ( ) " Mechanical Cells ( ) " Drawing Cells ( ) 3-3 • Expedition PCB : 2007 :3-2 Expedition PCB
  • (Cell Editor) Cell Editor Cell Editor : " Package " Mechanical " Drawing " Panel ( FablinkXE) 3-4 • Expedition PCB : 2007 :Expedition PCB 3-3
  • ( ) 2. Package, Mechani- cal, Drawing. 1. . New Cell ( ) Copy Cell 3. ( ) Properties ( ) Edit Graphics ( ) Undo Delete ( ) Delete Cell ( ) 3-5 • Expedition PCB : 2007 :3-4 Expedition PCB
  • Set number of pins and layers. Package group. 3-6 • Expedition PCB : 2007 :Expedition PCB 3-5
  • ( ) : "Height ( ) "Underside space ( ) " Close : 3-7 • Expedition PCB : 2007 :3-6 Expedition PCB
  • ( ) Place Pins. 3-8 • Expedition PCB : 2007 :Expedition PCB 3-7
  • ( ) . Padstack. padstack. . ( ). . - 3-9 • Expedition PCB : 2007 :3-8 Expedition PCB
  • ( ) : : " . " , . " . -3 X-Y Place " . — . 3-10 • Expedition PCB : 2007 :Expedition PCB 3-9
  • ( ) . " : . 3-11 • Expedition PCB : 2007 :3-10 Expedition PCB
  • Placement Outline : Assembly Outline " Silkscreen Outline " Assembly Reference Designator Silkscreen Reference Designator 3-12 • Expedition PCB : 2007 :Expedition PCB 3-11
  • , Verified ( ). 3-13 • Expedition PCB : 2007 :3-12 Expedition PCB
  • ♦ . ! . – . – SMD , . , . 3-14 • Expedition PCB : 2007 :Expedition PCB 3-13
  • 4 : • , “ ” • Parts Database (PDB) EditorExpedition PCB 4-1
  • (Parts)? ♦ Part Database (PDB) . ♦ PDB ( , , . ), , , , . ♦ PDB (part numbers). ! , PDB . ! . ♦ (Part Name) (Part Label). 4-3 • Expedition PCB : 2007 :4-2 Expedition PCB
  • ?( ) ♦ : ! ! ! ♦ Expedition PCB. 4-4 • Expedition PCB : 2007 :Expedition PCB 4-3
  • PartsDB Editor " , Parts DB Editor. " . " . " . 4-5 • Expedition PCB : 2007 :4-4 Expedition PCB
  • 1. . 2. New 3. : Number, Name, Label. ♦ Number ! PDB ! - 4. ♦ Name ! . ! - 5. . ♦ Label ! 6. Ref Des Prefix. ! - 7. Pin Mapping. 4-6 • Expedition PCB : 2007 :Expedition PCB 4-5
  • 4-7 • Expedition PCB : 2007 :4-6 Expedition PCB
  • 1. Import. 2. . 3. . 4. . 5. - . " OK ( ). 4-8 • Expedition PCB : 2007 :Expedition PCB 4-7
  • Logical " , " . . " . " : " . " Swap. 4-9 • Expedition PCB : 2007 :4-8 Expedition PCB
  • ♦ . ♦ , . ♦ , ( ). 4-10 • Expedition PCB : 2007 :Expedition PCB 4-9
  • 1. Import. 2. . 3. Package Group. 4. - . 5. . 6. Top, Bottom, Alternate. " OK Physical. 4-11 • Expedition PCB : 2007 :4-10 Expedition PCB
  • ♦ : ! . , . ! , . ! Expedition PCB, . ! - . 4-12 • Expedition PCB : 2007 :Expedition PCB 4-11
  • Physical " " : . " " Physical Pins. " , , Paste Down Paste Across. 4-13 • Expedition PCB : 2007 :4-12 Expedition PCB
  • Supply and NC ♦ , ♦ Physical Pins. : . 4-14 • Expedition PCB : 2007 :Expedition PCB 4-13
  • ♦ . ! . – , . 4-15 • Expedition PCB : 2007 :4-14 Expedition PCB
  • 5 : • “Layout Template” • •Expedition PCB 5-1
  • Expedition PCB. . A . Expedition PCB B : " . " Mentor Graphics. 5-3 • Expedition PCB : 2007 :5-2 Expedition PCB
  • Change name 1. Layout Template Editor. 2. . 3. Copy. 4. . 5-4 • Expedition PCB : 2007 :Expedition PCB 5-3
  • ( ) 1. Layout Template Editor. 2. . 3. Copy. 4. . 5. Edit Template. 6. Expedition PCB, Setup > Parameters. Name 7. General, changed - . 8. Remap Layers. 5-5 • Expedition PCB : 2007 :5-4 Expedition PCB
  • 1. Template Editor. 2. New. 3. .pcb . 4. . 5-6 • Expedition PCB : 2007 :Expedition PCB 5-5
  • : 5-7 • Expedition PCB : 2007 :5-6 Expedition PCB
  • ( ) , . - - Expedition PCB. . .- . .- Expedition PCB. Expedition PCB. 5-8 • Expedition PCB : 2007 :Expedition PCB 5-7
  • " , " : . " Setup > Project Integration. " . " . " .lmc . 5-9 • Expedition PCB : 2007 :5-8 Expedition PCB
  • Library Services 1. . : ♦ , 2. " ". . ♦ 3. . ♦ Library Manager “ ” . . 4. 5-10 • Expedition PCB : 2007 :Expedition PCB 5-9
  • ♦ . ! . – , . 5-11 • Expedition PCB : 2007 :5-10 Expedition PCB
  • 6 Editor : • (Graphical User Interface) • • Display Control • Expedition • • • File Viewer (ASCII) • Expedition SupportnetExpedition PCB 6-1
  • 6-3 • Expedition PCB : 2007 :6-2 Expedition PCB
  • ♦ ♦ ♦ ♦ Shift- ♦ ♦ Shift- ♦ ♦ 6-4 • Expedition PCB : 2007 :Expedition PCB 6-3
  • View Area (159) View All (951) 1 2 3 1 2 3 4 5 6 4 5 6 7 8 9 7 8 9 ♦ - . ♦ View. 6-5 • Expedition PCB : 2007 :6-4 Expedition PCB
  • Display Control View > Display Control : 6-6 • Expedition PCB : 2007 :Expedition PCB 6-5
  • - Display Control — Layer Paired Layers 6-7 • Expedition PCB : 2007 :6-6 Expedition PCB
  • - Display Control — General General View > Display Control : " " " 6-8 • Expedition PCB : 2007 :Expedition PCB 6-7
  • - Display Control — Part View > Display Control 6-9 • Expedition PCB : 2007 :6-8 Expedition PCB
  • - Display Control — Net View > Display Control 6-10 • Expedition PCB : 2007 :Expedition PCB 6-9
  • - Display Control — Hazard View > Display Control 6-11 • Expedition PCB : 2007 :6-10 Expedition PCB
  • ♦ (Place Mode) ! . ♦ (Route Mode) ! , - . ! Expedition PCB. ♦ (Draw Mode) ! , . 6-12 • Expedition PCB : 2007 :Expedition PCB 6-11
  • Place Mode Placement Outlines : 1. 2. 3. : Shift Ctrl , . (Ctrl .) 6-13 • Expedition PCB : 2007 :6-12 Expedition PCB
  • ( ) Place Mode : 1. 2. : Shift , . (Ctrl 3. - .) 4. 6-14 • Expedition PCB : 2007 :Expedition PCB 6-13
  • " . " - . " . " , . " - - . 6-15 • Expedition PCB : 2007 :6-14 Expedition PCB
  • Board Outline Conductive Shape Contour Draw Object DRC Window Drill Drawing Generated plane Generated Silkscreen Insertion Outline Placement Obstruct Placement Outline Plane No Connect Plane Obstruct Plane Shape Resistor Shape Room Route Border Route Obstruct Rule Area Test Point Obstruct Text Trace 6-16 • Expedition PCB : 2007 :Expedition PCB 6-15
  • (Highlight Selected) (Unhighlight All) 1. 2. Highlight Selected 6-17 • Expedition PCB : 2007 :6-16 Expedition PCB
  • Edit > Find " , , " Select - Shift " Highlight - Ctrl Fit View - 6-18 • Expedition PCB : 2007 :Expedition PCB 6-17
  • File Viewer File > File Viewer " File Viewer - " " 6-19 • Expedition PCB : 2007 :6-18 Expedition PCB
  • Help > Contents > Expedition PCB . 6-20 • Expedition PCB : 2007 :Expedition PCB 6-19
  • SupportNet 6-21 • Expedition PCB : 2007 :6-20 Expedition PCB
  • 6-22 • Expedition PCB : 2007 :Expedition PCB 6-21
  • ( ) Service Request. 6-23 • Expedition PCB : 2007 :6-22 Expedition PCB
  • Service Request , 6-24 • Expedition PCB : 2007 :Expedition PCB 6-23
  • ♦ . ! . – Expedition PCB 6-25 • Expedition PCB : 2007 :6-24 Expedition PCB
  • 7 : • • • Editor Control • •Expedition PCB 7-1
  • ♦ Expedition Common Database (CDB) ♦ CDB : - - (RefDes) - (Part numbers) - CDB DxDesigner Design Capture Expedition 7-3 • Expedition PCB : 2007 :7-2 Expedition PCB
  • -Expedition PCB Padstacks Layout Symbols Parts Cells Templates DxDatabook Place Device Compile Fwd Annotate Common Absorb Database Back Annotate DxDesigner Design Capture Expedition PCB 7-4 • Expedition PCB : 2007 :Expedition PCB 7-3
  • Start > Programs > Mentor Graphics SDD > Job Management Wizard 1: 2: Create. . 7-5 • Expedition PCB : 2007 :7-4 Expedition PCB
  • ( ) 4: Compile CDB 3: Forward annotation. . Start Continue Process. 7-6 • Expedition PCB : 2007 :Expedition PCB 7-5
  • ( ) 5: . View Process Report Files, , . Finish. 7-7 • Expedition PCB : 2007 :7-6 Expedition PCB
  • DxDesigner PCB PCB 7-8 • Expedition PCB : 2007 :Expedition PCB 7-7
  • Design Capture PCB PCB 7-9 • Expedition PCB : 2007 :7-8 Expedition PCB
  • Setup > Setup Parameters ♦ . ! - ! ! ! (Via) ! ♦ . 7-10 • Expedition PCB : 2007 :Expedition PCB 7-9
  • (Physical Layers) (User Layers) 1. Setup Parameters – General. 1. Setup Parameters – General. 2. - . 2. New. 3. Remap layers. 3. . Display Control. 7-11 • Expedition PCB : 2007 :7-10 Expedition PCB
  • Planes > Plane Assignments Included Nets : Plane Positive Negative 7-12 • Expedition PCB : 2007 :Expedition PCB 7-11
  • ♦ . ♦ . ♦ , . ♦ Planes Processor ( ). ♦ . 7-13 • Expedition PCB : 2007 :7-12 Expedition PCB
  • Default Via Setup > Setup Parameters . . . 7-14 • Expedition PCB : 2007 :Expedition PCB 7-13
  • Layer Stackup , Expedition PCB . 7-15 • Expedition PCB : 2007 :7-14 Expedition PCB
  • Editor Control Setup > Editor Control ♦ Editor Control . ♦ . 7-16 • Expedition PCB : 2007 :Expedition PCB 7-15
  • AutoSave ♦ Common Settings. ♦ , . ♦ Expedition PCB . ♦ Expedition PCB " ", . ! : 7-17 • Expedition PCB : 2007 :7-16 Expedition PCB
  • File > Save Copy " . " iCDB. " . 1. . 2. . 3. . 4. , PCB ( ) . 7-18 • Expedition PCB : 2007 :Expedition PCB 7-17
  • Start > Programs > Mentor Graphics SDD > Job Management Wizard ♦ . 1. Expedition PCB. 2. Job Management Wizard. 3. . 4. . 7-19 • Expedition PCB : 2007 :7-18 Expedition PCB
  • Expedition PCB Job Management Wizard . 7-20 • Expedition PCB : 2007 :Expedition PCB 7-19
  • ♦ . ! . – Expedition PCB. . 7-21 • Expedition PCB : 2007 :7-20 Expedition PCB
  • 8 : • , : • • • •Expedition PCB 8-1
  • Draw Mode ♦ : ! ! ! ! . 8-3 • Expedition PCB : 2007 :8-2 Expedition PCB
  • 1. ♦ ♦ ! ! , 2. 3. ! ! – : , : , Properties ( ). 8-4 • Expedition PCB : 2007 :Expedition PCB 8-3
  • ( ) ♦ (Polyline) ♦ (Polygon) ! ! ! . ! . ! ! . . ! Vertex type ! “Insert Arc” . 8-5 • Expedition PCB : 2007 :8-4 Expedition PCB
  • ( ) ♦ (Rectangle) ♦ (Circle) ! ! ! . ! , . : , “0” 8-6 • Expedition PCB : 2007 :Expedition PCB 8-5
  • . , - , Create Polygon , , Join. " " " " " " " " " " " " " " " " 8-7 • Expedition PCB : 2007 :8-6 Expedition PCB
  • ♦ Expedition PCB : ! Board Outlines, Route Borders, Placement Obstructs, Rule Areas, . . ♦ ( , , ), ♦ , ( Create Polygon - ). ! . – Board Outline – Route Border 8-8 • Expedition PCB : 2007 :Expedition PCB 8-7
  • ( ) ♦ ! (Trim) – . – . – . ! (Join) – – . – , . 8-9 • Expedition PCB : 2007 :8-8 Expedition PCB
  • ( ) ♦ ! / (Polygon/Polyline) – . – . – , . ! / (Polygon/Polyline) – / . – . 8-10 • Expedition PCB : 2007 :Expedition PCB 8-9
  • Board Outline ♦ - , ♦ ( ). ♦ : ! DXF. ! Expedition PCB. 8-11 • Expedition PCB : 2007 :8-10 Expedition PCB
  • ( ) 1. Edit > Place > Board Outline. 2. Board Outline. 4. Corner, Round, Chamfer. 3. . 5. 6. . 8. 7. , . . 8-12 • Expedition PCB : 2007 :Expedition PCB 8-11
  • : : 1. . 1. . 2. . 2. . 3. . 3. Delete the End Point Handle. 8-13 • Expedition PCB : 2007 :8-12 Expedition PCB
  • ( ): 1. ( ) 2. 3. 4. 5. ( ) : 1. 2. 3. : : 1. 1. 2. 2. Ctrl 3. 3. 8-14 • Expedition PCB : 2007 :Expedition PCB 8-13
  • Route Border " . 1. Board Outline. 2. Ctrl- , ( “ ” ). 3. Route Border " . Properies. " . 8-15 • Expedition PCB : 2007 :8-14 Expedition PCB
  • Mounting Holes Edit > Place > Mounting Hole : 1. Edit > Place > Mounting Hole 2. 3. 4. None ( ) - Fixed ( ) Locked ( ) . 8-16 • Expedition PCB : 2007 :Expedition PCB 8-15
  • ( ) . 1. . 2. Properties. 3. : 8-17 • Expedition PCB : 2007 :8-16 Expedition PCB
  • Board Origins Edit > Place > Origin : 1. Edit > Place Origin. 2. , . 3. . 4. OK. : Apply OK NC Drill Origin . . 8-18 • Expedition PCB : 2007 :Expedition PCB 8-17
  • Placement Obstructs 1. Edit > Place > Placement Obstruct. 2. , . 3. : a. b. (top bottom) c. ( ) 4. . 8-19 • Expedition PCB : 2007 :8-18 Expedition PCB
  • Route Obstructs 1. Edit > Place > Route Obstruct. : . . 2. . 3. : a. b. ( ) c. - , , 4. . 8-20 • Expedition PCB : 2007 :Expedition PCB 8-19
  • ♦ . ! . – , , , , , . . 8-21 • Expedition PCB : 2007 :8-20 Expedition PCB
  • 9 • • , • •Expedition PCB 9-1
  • Setup > Editor Control (Parts) (Grids) 14 : ♦ (Warning) ! ♦ (Preventative) ! (primary) ♦ (Shove Part) Minimum number of pin , ! , Mount style. ( ) (secondary) . 9-3 • Expedition PCB : 2007 :9-2 Expedition PCB
  • Place > Place Parts and Cells , Editor Control 9-4 • Expedition PCB : 2007 :Expedition PCB 9-3
  • ( ) Place > Place Parts and Cells — Part Properties 9-5 • Expedition PCB : 2007 :9-4 Expedition PCB
  • ♦ ! pr -Ref-Des – – : • pr U1 • pr U* ♦ ! pr -angle=a Ref-Des – – : • pr 500,1000 U11 • pr 1225, 790 -a=90 C1 9-6 • Expedition PCB : 2007 :Expedition PCB 9-5
  • ( ) ♦ ! pr -dist -Ref-Des – . – : • pr -dist U1 • pr -dist R* • pr -dist * – • -cols=n (-c) - - – pr -dist -c=7 R* – “5” • -angle=a (-a) - – pr -dist -a=45 -cols=8 C* 9-7 • Expedition PCB : 2007 :9-6 Expedition PCB
  • ( ) ♦ . ! pr -file=[ ]. – . – : • pr -file=placement.txt – : • -x - . – pr -file=current.txt -x. – pcb. – : • .ref RefDes X,Y . 9-8 • Expedition PCB : 2007 :Expedition PCB 9-7
  • ( ) ♦ . ! mr -Ref-Des. – . – : • mr U1 • mr U1 , U16 , C* ♦ . ! mr dx=x,y -Ref-Des. – x,y. – : • mr dx=0,100 I* • mr dx=-50 U1 , U16 – x. • mr dx=,25 C* – y. 9-9 • Expedition PCB : 2007 :9-8 Expedition PCB
  • ( ) ♦ . ! mr x,y Ref-Des. – x,y. – : • mr 1200, 2725 U1 – : • -a= – mr 1200,2725 -a=90 U1 ♦ . ! ms x,y. – x,y. – . – : • ms 1200, 2725 9-10 • Expedition PCB : 2007 :Expedition PCB 9-9
  • ( ) ♦ . ! ms dx=x,y – x,y. – : • ms dx=0,100 • ms dx=-50 – x. • ms dx=,25 – y. – . 9-11 • Expedition PCB : 2007 :9-10 Expedition PCB
  • 1. F2 Place > Move 2. Place > Move 3. " " . : , Expedition PCB “ ”. . 9-12 • Expedition PCB : 2007 :Expedition PCB 9-11
  • Place > Rotate 90 Place > Rotate 180 Rotated 90o : , . 9-13 • Expedition PCB : 2007 :9-12 Expedition PCB
  • . F5 1. Place > Push 2. . 3. Place > Push . . Push . . : , , . 9-14 • Expedition PCB : 2007 :Expedition PCB 9-13
  • Place > Align Top Place > Align Right Place > Align Bottom Place > Align Left ! ! ! ! ! ! ! - - ! ! ! ! ! 1. 2. . . 9-15 • Expedition PCB : 2007 :9-14 Expedition PCB
  • Color By Net View > Display Control Color by Net , . ( ) 1. Net Display Control 2. Color by Net 3. 4. 9-16 • Expedition PCB : 2007 :Expedition PCB 9-15
  • Place > Swap Parts U12 U13 U24 U12 U24 U13 ! ! ! ! ! ! . 1. Place > Swap Parts. 2. . 3. . 4. . 9-17 • Expedition PCB : 2007 :9-16 Expedition PCB
  • , Place > Automatic > Swap by Part Number 1. Place > Automatic > Swap by Part Number. 2. . 3. ( , ). 4. Apply. 5. Repeat as needed. , 9-18 • Expedition PCB : 2007 :Expedition PCB 9-17
  • Route > Swap > Gates : . U24 U17 1 14 1 14 A 4 A 2 13 U2 2 13 D D 3 12 3 12 2 4 11 4 11 B 1 B 5 10 5 10 C 0 U3 C 6 9 6 9 7 8 7 8 U17-A U2. 1. Route > Swap > Gates. U24-D . 2. U17-3. 3. U24-11. 4. . 9-19 • Expedition PCB : 2007 :9-18 Expedition PCB
  • Route > Swap > Pins : . 1 14 1 14 A A 2 13 2 13 D D 3 12 3 12 4 11 4 11 B B 5 10 5 10 C C 6 9 6 9 7 8 7 8 . 1. Route > Swap > Pins. 2. . 3. . 4. . 9-20 • Expedition PCB : 2007 :Expedition PCB 9-19
  • Back Annotation ♦ , . ! CDB, - iCDB. ! Expedition PCB , . ! - , , CDB, Expedition PCB. ! Expedition PCB - " " . ! , , Expedition PCB - " " . 9-21 • Expedition PCB : 2007 :9-20 Expedition PCB
  • Expedition ( ) iCDB. Absorb Back Annotate iCDB DxDesigner Design Capture Setup > Project Integration Project > Settings (DC) Expedition . 9-22 • Expedition PCB : 2007 :Expedition PCB 9-21
  • CES CES Gate/Pin, Ref Des 9-23 • Expedition PCB : 2007 :9-22 Expedition PCB
  • , CES CES CES 9-23 • Expedition PCB : 2007 :9-22 Expedition PCB
  • . 1. (Unplaced) 2. Mechanical Cell 3. 4. - . 9-23 • Expedition PCB : 2007 :9-22 Expedition PCB
  • ♦ . ! . – . . 9-24 • Expedition PCB : 2007 :Expedition PCB 9-23
  • 10 : • • • •Expedition PCB 10-1
  • ♦ (Online DRC) ♦ (Batch DRC) ! ! ! ! ! - ! “ ” 10-3 • Expedition PCB : 2007 :10-2 Expedition PCB
  • Online DRC Editor Control - Part. - . Editor Control - General. Batch DRC – , Batch DRC 10-4 • Expedition PCB : 2007 :Expedition PCB 10-3
  • Batch DRC Analysis > Batch DRC ♦ Batch DRC , , . ♦ DRC . ♦ DRC Window ( , ). ♦ Help. 10-5 • Expedition PCB : 2007 :10-4 Expedition PCB
  • Connectivity and Special Rules Analysis > Batch DRC ♦ : ! – , , – ! ! ! ! ! ! 10-6 • Expedition PCB : 2007 :Expedition PCB 10-5
  • - Advanced Element to Element Rules Analysis > Batch DRC " - " - " - " Blue - " 10-7 • Expedition PCB : 2007 :10-6 Expedition PCB
  • Analysis > Batch DRC , . 10-8 • Expedition PCB : 2007 :Expedition PCB 10-7
  • Analysis > Review Hazards Online . drc.txt File Viewer. 10-9 • Expedition PCB : 2007 :10-8 Expedition PCB
  • Analysis > Review Hazards , . Apply . 10-10 • Expedition PCB : 2007 :Expedition PCB 10-9
  • ( ) 1. . , . 2. Hide. 1. - . . 2. Hide. 2. . 10-11 • Expedition PCB : 2007 :10-10 Expedition PCB
  • ( ) Report Selected Hazards , . Report All PCB Hazards , . 10-12 • Expedition PCB : 2007 :Expedition PCB 10-11
  • ♦ ♦ ! , , Measure View > Toolbars > Measure. 10-13 • Expedition PCB : 2007 :10-12 Expedition PCB
  • ♦ , Measure . Measure > Minimum Distance 10-14 • Expedition PCB : 2007 :Expedition PCB 10-13
  • 1) 2) , 3) Minimum Distance. . . Segment. Segment 4) 5) . Segment 4) . 5) . 10-15 • Expedition PCB : 2007 :10-14 Expedition PCB
  • : . 3) 1) 2) Center Measure Distance. Mode. 4) Edge Mode. 5) . 10-16 • Expedition PCB : 2007 :Expedition PCB 10-15
  • Edit > Review > Design Status " , , , . . 10-17 • Expedition PCB : 2007 :10-16 Expedition PCB
  • Analysis > Design-Library Verification " 10-18 • Expedition PCB : 2007 :Expedition PCB 10-17
  • ♦ . ! . – , , . 10-19 • Expedition PCB : 2007 :10-18 Expedition PCB
  • 11 : • Editor Control • CES Design Capture, DxDesigner, Expedition PCB • CES •Expedition PCB 11-1
  • Editor Control Setup > Editor Control – Route / / 11-3 • Expedition PCB : 2007 :11-2 Expedition PCB
  • Editor Control — Plow Setup > Editor Control – Route ♦ Modes: . ♦ General Options: 45° . ♦ Strength Control: Effort — . Layer bias — . Via cost — . Max vias added — . 11-4 • Expedition PCB : 2007 :Expedition PCB 11-3
  • Editor Control — Routes Setup > Editor Control – Route ♦ Push & Shove: . ♦ Gloss mode ( ): On — . , , . . Local — . . Off — . - . ♦ Advanced gloss : . 11-5 • Expedition PCB : 2007 :11-4 Expedition PCB
  • Editor Control — Vias and Fanouts Setup > Editor Control – Route ♦ Vias and Fanouts: . SMD. . . . SMD . 11-6 • Expedition PCB : 2007 :Expedition PCB 11-5
  • Editor Control — General Options Setup > Editor Control – Route ♦ Turn on/off net rules: , Net Properties CES. ♦ Curve Traces: Radius — . Min radius — Modify Corners. 11-7 • Expedition PCB : 2007 :11-6 Expedition PCB
  • Editor Control — Net Filter Setup > Editor Control – Route > . - ( ) 11-8 • Expedition PCB : 2007 :Expedition PCB 11-7
  • Editor Control — Layer Settings Setup > Editor Control – Route > Layer Settings: ♦ . ♦ . ♦ . . 11-9 • Expedition PCB : 2007 :11-8 Expedition PCB
  • Editor Control — Diff Pairs Setup > Editor Control – Route > Differential Pairs: ♦ . ♦ CES. ♦ Min Length. " ", . ♦ . ♦ . 11-9 • Expedition PCB : 2007 :11-9 Expedition PCB
  • Editor Control — Pad Enry Setup > Editor Control – Route > Prefer 11-9 • Expedition PCB : 2007 :11-10 Expedition PCB
  • Editor Control — Expand Traces Setup > Editor Control – Route > : ♦ . ♦ . ♦ . . 11-9 • Expedition PCB : 2007 :11-11 Expedition PCB
  • Editor Control — Grids Setup > Editor Control – Grids ♦ Shape-based router . ♦ , , . 11-9 • Expedition PCB : 2007 :11-12 Expedition PCB
  • CES? ♦ CES ♦ CES , Mentor Graphics, ♦ : ! Expedition PCB. ! Design Capture. ! DxDesigner. 11-10 • Expedition PCB : 2007 :Expedition PCB 11-13
  • CES DxDesigner / Expedition PCB Design Capture iCDB Constraint Editor System (CES) 11-11 • Expedition PCB : 2007 :11-14 Expedition PCB
  • CES DxDesigner ♦ CES . ♦ CES : Tools > Constraint Editor System. 11-12 • Expedition PCB : 2007 :Expedition PCB 11-15
  • CES Design Capture 1. Project > New, 4. Use CES for constraint entry. 2. CES Tools > Constraint Editor System. 11-13 • Expedition PCB : 2007 :11-16 Expedition PCB
  • CES Expedition PCB CES Expedition PCB, Setup . Design Capture/ ExpeditionPCB . CES CES 11-16 • Expedition PCB : 2007 :Expedition PCB 11-17
  • CES CES CES 11-18 • Expedition PCB : 2007 :Expedition PCB 11-18
  • CES CES Browser CES: ♦ . ♦ : ! ! ! ♦ . 11-19 • Expedition PCB : 2007 :11-19 Expedition PCB
  • CES CES Spreadsheets 11-20 • Expedition PCB : 2007 :Expedition PCB 11-20
  • (Master) , (Master) - - - - . - - - 11-21 • Expedition PCB : 2007 :11-21 Expedition PCB
  • 1. Net Classes. 2. New Net Class. 3. New, . New. , New Net Class. 11-22 • Expedition PCB : 2007 :Expedition PCB 11-22
  • ( ) . 11-23 • Expedition PCB : 2007 :11-23 Expedition PCB
  • 1. Assign Nets. 2. . 3. OK Apply . 11-24 • Expedition PCB : 2007 :Expedition PCB 11-24
  • Trace & Via Properties " Route - " Typical Impedance - " Trace Widths - , " Diff Pair Spacing - . 11-25 • Expedition PCB : 2007 :11-25 Expedition PCB
  • : 1. browse. 2. . 3. OK. " . " (None), . 11-26 • Expedition PCB : 2007 :Expedition PCB 11-26
  • 11-27 • Expedition PCB : 2007 :11-27 Expedition PCB
  • ( ) 11-28 • Expedition PCB : 2007 :Expedition PCB 11-28
  • - 1. . 2. 3. 4. . . . 5. New. Clearance. 6. - . 11-29 • Expedition PCB : 2007 :11-29 Expedition PCB
  • General Clearance Rules - , . . help. Clearance. 11-30 • Expedition PCB : 2007 :Expedition PCB 11-30
  • : 1. 1. Schemes . Master. 2. New Scheme. 2. New 3. New . . 3. New . 11-31 • Expedition PCB : 2007 :11-31 Expedition PCB
  • Expedition PCB 1. . - 2. Rule Area, , , . ; 3. CES . . 11-32 • Expedition PCB : 2007 :Expedition PCB 11-32
  • Topologies Nets – Net Properties. MST Chained TShape HTree Star Custom - H- L V L L L S L L Complex S S S L V V V L L T LV L L L : : : : : ( ) ( ) ( ) 11-33 • Expedition PCB : 2007 :11-33 Expedition PCB
  • ( ) Netline Order. 1. from pin. 2. to pin. 3. . 11-34 • Expedition PCB : 2007 :Expedition PCB 11-34
  • Nets - Delays and Lengths. Min Max Min length - Max length - ( " " . ) . ( ). . 11-35 • Expedition PCB : 2007 :11-35 Expedition PCB
  • Data > Update > Electrical Nets CES , 2 590.0000 196.71th " = 2 590.0000 118.11th 2 590.0000 744.97th 2 590.0000 510.31th 2 590.0000 551.33th " = 526.01th 2 590.0000 2 590.0000 902.45th 2 590.0000 944.15th 11-36 • Expedition PCB : 2007 :Expedition PCB 11-36
  • . Nets - Differential Pair. , Create Diff Pair . . . . 11-37 • Expedition PCB : 2007 :11-37 Expedition PCB
  • iCDB DxDesigner CES Expedition PCB Design Capture File > Exit iCDB CES: Expedition PCB . Expedition . CES : iCDB. Expedition PCB. 11-38 • Expedition PCB : 2007 :Expedition PCB 11-38
  • ♦ . ! . – Editor Control . – CES . 11-39 • Expedition PCB : 2007 :11-39 Expedition PCB
  • 12 : • • Auto-activeExpedition PCB 12-1
  • - : Fanout ( ) Route ( ) Reroute ( ) Gloss ( ) : " - . " - (Auto-active) - . " - . 12-3 • Expedition PCB : - 2007 :12-2 Expedition PCB
  • - AutoActive - : ♦ Fanout ( ) ♦ Tune ( ) ♦ Route ( ) ♦ Reroute ( ) ♦ Auto Finish ( - ) ( ) - . Editor Control - General. 12-4 • Expedition PCB : - 2007 :Expedition PCB 12-3
  • - ( ) Fanout Route , : . 1. . : 2. Route > 1. . Interactive > Route. 2. Route > Interactive > Fanout. 12-5 • Expedition PCB : - 2007 :12-4 Expedition PCB
  • - ( ) Reroute Gloss - : ( 1. ): 2. Route > 1. Interactive > Reroute. 2. Route > Interactive > Gloss. 12-6 • Expedition PCB : - 2007 :Expedition PCB 12-5
  • - ( ) Tune : 1. . 2. Route > Interactive >Tune. 12-7 • Expedition PCB : - 2007 :12-6 Expedition PCB
  • - Route > Interactive > Plow ♦ . ♦ Plowing - . ♦ . ♦ . ♦ Plow ! Escape . ♦ , Undo (F6). 12-8 • Expedition PCB : - 2007 :Expedition PCB 12-7
  • ♦ Forced Plow ! ! ! " " ♦ Route Plow ! - ! ♦ Angle Plow ! ! ♦ Dyna-Plow ! ! ! F3 12-9 • Expedition PCB : - 2007 :12-8 Expedition PCB
  • ( ) Route > Interactive > Plow Multiplow 3 , 1 Multi-Plow . 1. . 2. Plow. 3. . 4. 3 . 12-10 • Expedition PCB : - 2007 :Expedition PCB 12-9
  • Gloss Mode - F4 ♦ Plow. ♦ Gloss: ! Gloss On - , - . ! Gloss Local - , - , . ! Gloss Off - - ♦ Editor Control - Gloss: 12-11 • Expedition PCB : - 2007 :12-10 Expedition PCB
  • ♦ : 1. . 2. Edit > Fix . ♦ - , - . ♦ Edit > Add to Select Set . 12-12 • Expedition PCB : - 2007 :Expedition PCB 12-11
  • Setup > Editor Control View > Display Control " Editor Control. " Display Control. : 1. . 2. Ctrl key, . 12-13 • Expedition PCB : - 2007 :12-12 Expedition PCB
  • ( ) : ♦ , ♦ * ♦ * ♦ F10 * . ♦ v*( ) ♦ ♦ Display Control . ♦ Up/Down ♦ cl # ( , #= ) *- . 12-14 • Expedition PCB : - 2007 :Expedition PCB 12-13
  • : " Editor ontrol 1. . 2. , . 3. Esc . " . 12-15 • Expedition PCB : - 2007 :12-14 Expedition PCB
  • Route > Interactive > Copy Trace 3 ♦ 1. . 2. Copy Trace. – . 3. . – ( , ). 12-16 • Expedition PCB : - 2007 :Expedition PCB 12-15
  • 1. . 2. . 3. Push Trace (F10). 4. . 12-17 • Expedition PCB : - 2007 :12-16 Expedition PCB
  • ♦ ( ): 1. Modify Corners. 2. . 3. Action. 4. All Corners ( ) Selected Corners ( ). 5. Include fixed and locked corners ( ). 12-18 • Expedition PCB : - 2007 :Expedition PCB 12-17
  • ( ) 1. Editor Control – General. 2. , Toggle Curve (F11). 3. . 4. . 12-19 • Expedition PCB : - 2007 :12-18 Expedition PCB
  • Route > Change Width . 14 : 1. 1. Route > Change Width. 2. . 12-20 • Expedition PCB : - 2007 :Expedition PCB 12-19
  • ( ) . " " : cw . : , CES, Review Hazards , . 12-21 • Expedition PCB : - 2007 :12-20 Expedition PCB
  • Teardrops Teardrops & Breakout Traces > Teardrops Teardrops & Breakout Traces > Dynamic Teardrops " 12-22 • Expedition PCB : - 2007 :Expedition PCB 12-21
  • ♦ . ! . – - . 12-23 • Expedition PCB : - 2007 :12-22 Expedition PCB
  • 13 - Traces : • - •Expedition PCB 13-1
  • - - ♦ ♦ ! ! - ! ! ! ! 13-3 • Expedition PCB : - 2007 :13-2 Expedition PCB
  • - - Auto Route Route > Auto Route " " - " ". “ ”. 13-4 • Expedition PCB : - 2007 :Expedition PCB 13-3
  • - - Editor Control 13-5 • Expedition PCB : - 2007 :13-4 Expedition PCB
  • - - 13-6 • Expedition PCB : - 2007 :Expedition PCB 13-5
  • - - 13-7 • Expedition PCB : - 2007 :13-6 Expedition PCB
  • - - 13-8 • Expedition PCB : - 2007 :Expedition PCB 13-7
  • - - 13-9 • Expedition PCB : - 2007 :13-8 Expedition PCB
  • - ♦ . ! - . – - . 13-10 • Expedition PCB : - 2007 :Expedition PCB 13-9
  • 14 : • • • • •Expedition PCB 14-1
  • Expedition PCB : ♦ ! ! Part Number PDB ! Expedition PCB ♦ ! ! Expedition PCB ! Expedition PCB ! 14-3 • Advanced Expedition PCB: 2007 :14-2 Expedition PCB
  • ♦ Cell Editor. Setup Parameters - General ♦ . ♦ . ! , , - 35th, 25th, . ♦ , . ♦ , . 14-4 • Advanced Expedition PCB: 2007 :Expedition PCB 14-3
  • Setup > Setup Parameters — General ♦ Setup Parameters. ! . ! none . ! , , . ! . ♦ . 14-5 • Advanced Expedition PCB: 2007 :14-4 Expedition PCB
  • ♦ CES. ♦ - . Setup > Constraints - Clearance Tab – General Clearances 14-6 • Advanced Expedition PCB: 2007 :Expedition PCB 14-5
  • Route > Test Points > Auto Assign ♦ . ♦ - testptsumXX.txt testptecoXX.txt. ♦ . ♦ . ♦ . Setup Parameters 14-7 • Advanced Expedition PCB: 2007 :14-6 Expedition PCB
  • " Required. " . " Placed. 14-8 • Advanced Expedition PCB: 2007 :Expedition PCB 14-7
  • Test Summary . ECO Report - , , . 14-9 • Advanced Expedition PCB: 2007 :14-8 Expedition PCB
  • - ♦ , Place. ♦ . ! - . ! - . ♦ : : ! , , . ! , . ! . – , - . 14-10 • Advanced Expedition PCB: 2007 :Expedition PCB 14-9
  • ♦ , ( , ). ♦ , . : 1. . 2. . 3. Edit > Place >Test Points Route > Test Points > Place. 4. . 5. , : - . 14-11 • Advanced Expedition PCB: 2007 :14-10 Expedition PCB
  • ( ) - : ♦ . ♦ Select Fit View - . ♦ - 14-12 • Advanced Expedition PCB: 2007 :Expedition PCB 14-11
  • ♦ . ! Expedition PCB . ! , . ! , . – , , . ♦ , . 14-13 • Advanced Expedition PCB: 2007 :14-12 Expedition PCB
  • Add to Select List ♦ Edit > Add to Select Set : ! . ! . ! . ♦ . 14-14 • Advanced Expedition PCB: 2007 :Expedition PCB 14-13
  • " Advanced Elements Analysis > Batch DRC 14-15 • Advanced Expedition PCB: 2007 :14-14 Expedition PCB
  • ♦ : ♦ . ! , - . ! . 14-16 • Advanced Expedition PCB: 2007 :Expedition PCB 14-15
  • ( ) ♦ , . ! . – . – – . – . ! . – • Via to Via - , . • Via to Pad - , . • Via to Trace - , ( ). ! . ! Fanout. ! . ! , . 14-17 • Advanced Expedition PCB: 2007 :14-16 Expedition PCB
  • ♦ . ! . – control1_reva. – . . 14-18 • Advanced Expedition PCB: 2007 :Expedition PCB 14-17
  • 15 : • • • • Plane Processor • • •Expedition PCB 15-1
  • ? ♦ - , . ♦ , . ♦ . ♦ . ♦ ♦ . ♦ ECO . 15-3 • Expedition PCB : 2007 :15-2 Expedition PCB
  • " , " . . " " . . " " . . " " . . 15-4 • Expedition PCB : 2007 :Expedition PCB 15-3
  • Planes > Plane Assignments Included Nets Plane Positive Negative 15-5 • Expedition PCB : 2007 :15-4 Expedition PCB
  • - Setup > Constraints - Clearance " Clearances CES. " . " , , . 15-6 • Expedition PCB : 2007 :Expedition PCB 15-5
  • Plane Shapes ♦ ( ) : . . Draw Mode. ♦ . ♦ . ♦ ( ) , . ♦ ( ) / . 15-7 • Expedition PCB : 2007 :15-6 Expedition PCB
  • Edit > Place > Plane Shape Plane Classes and Parameters . 15-8 • Expedition PCB : 2007 :Expedition PCB 15-7
  • " . " , . " . " , , " ". " : 1. . 2. Properties. 3. . 15-9 • Expedition PCB : 2007 :15-8 Expedition PCB
  • Split Planes 1. . 2. Color by net . 3. . 4. . - Setup Parameters CES 15-10 • Expedition PCB : 2007 :Expedition PCB 15-9
  • ♦ . ♦ : Planes > Place Plane Editing Sketch. Draw Plane Editing Sketch Properties. ♦ Draw. ♦ Route . ♦ Plane Shapes and Obstructs Display Control. 15-10 • Expedition PCB : 2007 :Expedition PCB 15-10
  • Dynamic Area Fill " Dynamic Area Fill . " , . " , ( ) . " Plane Data Fill/Hatch Display Control 15-11 • Expedition PCB : 2007 :15-11 Expedition PCB
  • ♦ Plane Obstruct ( ) ♦ Plane No Connect ! ( ) ! ! , ! 15-12 • Expedition PCB : 2007 :Expedition PCB 15-12
  • Planes > Plane Classes Parameters Negative – padstack . Positive – , . padstack . . 15-13 • Expedition PCB : 2007 :15-13 Expedition PCB
  • ( .) Planes > Plane Classes Parameters 15-14 • Expedition PCB : 2007 :Expedition PCB 15-14
  • ( .) Planes > Plane Classes Parameters , . " , - . CES - " Anti-Pad . . " Donut , . . . 15-15 • Expedition PCB : 2007 :15-15 Expedition PCB
  • ( .) Planes > Plane Classes Parameters " . . . 15-16 • Expedition PCB : 2007 :Expedition PCB 15-16
  • Place Via Edit > Place > Via ♦ - . 15-18 • Expedition PCB : 2007 :Expedition PCB 15-17
  • ♦ : . . ♦ Planes > Generate Negative Planes. ♦ Process Gerber Output files ... 15-19 • Expedition PCB : 2007 :15-18 Expedition PCB
  • Planes > Delete Negative Plane Data . Planes. . 15-19 • Expedition PCB : 2007 :15-19 Expedition PCB
  • ♦ , . Planes > Routed Pins 1. . 3. 2. - . - . 15-20 • Expedition PCB : 2007 :Expedition PCB 15-20
  • ♦ , Batch DRC . ♦ : ! . ! . ! . 15-21 • Expedition PCB : 2007 :15-21 Expedition PCB
  • ♦ . ! . – , . 15-22 • Expedition PCB : 2007 :Expedition PCB 15-22
  • 16 : • • • •Expedition PCB 16-1
  • ? ♦ - . ♦ : ! . ! . ! . ♦ . ♦ Gerber . Part Number 16-3 • Expedition PCB : 2007 :16-2 Expedition PCB
  • ECO > Renumber Ref Des . " Filter - . . " Prefixes - , (C) . " Process list - , . . 1, . , - , . 16-4 • Expedition PCB : 2007 :Expedition PCB 16-3
  • ( ) " . " , . " . 16-5 • Expedition PCB : 2007 :16-4 Expedition PCB
  • ( ) Auto Renumber ♦ - - . ! , . ! , . 1, – . Prefix - . 16-6 • Expedition PCB : 2007 :Expedition PCB 16-5
  • : 1. Reference Designator. 2. , Properties. 3. , . 4. , Properties. 16-7 • Expedition PCB : 2007 :16-6 Expedition PCB
  • " , , ( Silkscreen ). " , Properties. " Drawing Cells Place > Place Parts and Cell. " Drawing Cell, . 16-8 • Expedition PCB : 2007 :Expedition PCB 16-7
  • Output > Silkscreen Generator , ( ) " Silkscreen Generator Silkscreen. 16-9 • Expedition PCB : 2007 :16-8 Expedition PCB
  • ( ) Output > Silkscreen Generator " . " Shift. " Ctrl. 16-10 • Expedition PCB : 2007 :Expedition PCB 16-9
  • ( ) Output > Silkscreen Generator - Silkscreen. - Silkscreen Generator. - . ! ( - .) 16-11 • Expedition PCB : 2007 :16-10 Expedition PCB
  • ♦ . ! . – , Display Control. 16-12 • Expedition PCB : 2007 :Expedition PCB 16-11
  • 17 : • • • NC drillExpedition PCB 17-1
  • , , , . 17-3 • Expedition PCB : Generating 2007 :17-2 Expedition PCB
  • Setup > Gerber Machine Format ♦ config . ♦ - - New, . ♦ . 17-4 • Expedition PCB : Generating 2007 :Expedition PCB 17-3
  • Output > Gerber “.gpf” “.gpf” .gpf config. Gerber Plot Files Layout Templates. Gerber. ( gmf - .) 17-5 • Expedition PCB : Generating 2007 :17-4 Expedition PCB
  • ( ) Output > Gerber - . D-code - . 274X - 274D . ( ). . 17-6 • Expedition PCB : Generating 2007 :Expedition PCB 17-5
  • Output > Gerber ( Parameters) . - , . 17-7 • Expedition PCB : Generating 2007 :17-6 Expedition PCB
  • Output > Gerber output/gerber. , . 17-8 • Expedition PCB : Generating 2007 :Expedition PCB 17-7
  • Padstack Editor. . . ! Automatic - NC Drill. ! None ( ). ! Character ( )- . ! Symbol - . ♦ Padstack. 17-9 • Expedition PCB : Generating 2007 :17-8 Expedition PCB
  • NC Drill Output > NC Drill - English Metric . NC Drill. . NC Drill ( ). 17-10 • Expedition PCB : Generating 2007 :Expedition PCB 17-9
  • NC Drill ( ) Output > NC Drill Drill Chart Drill Chart - Drill Chart NC Drill Drill Chart 17-11 • Expedition PCB : Generating 2007 :17-10 Expedition PCB
  • ♦ Drawing Cell 0,0 - Drill Chart Drawing Cell . ♦ NC Drill “output/ncdrill”. ! . ! . 17-12 • Expedition PCB : Generating 2007 :Expedition PCB 17-11
  • ♦ . ! . – Gerber. . 17-13 • Expedition PCB : Generating 2007 :17-12 Expedition PCB
  • 18 : • Expedition PCB • • • • • DXFExpedition PCB 18-1
  • ♦ , . ♦ , . ♦ : ! . ! . ! . ! . ! . 18-3 • Advanced Expedition PCB: 2007 :18-2 Expedition PCB
  • " Setup Parameters, . " , Draw Mode, Dimension Mode. " , . " Dimensioning Options. " . 18-4 • Advanced Expedition PCB: 2007 :Expedition PCB 18-3
  • Setup > Dimensioning Parameters ♦ Text Font & Height ! ♦ Dimension values ! , ♦ Format ! ♦ Line elements ! . 18-5 • Advanced Expedition PCB: 2007 :18-4 Expedition PCB
  • ( ) Setup > Dimensioning Parameters ♦ Terminator style ! , ♦ Text justification ! ♦ Stacked Text Distance ! ♦ Extension Gap ! ♦ Text orientation ! 18-6 • Advanced Expedition PCB: 2007 :Expedition PCB 18-5
  • Place Dimension Along a Linear Element 2. , . 1. . , - . " Stacked Text Distance , . " Extension Gap . 18-7 • Advanced Expedition PCB: 2007 :18-6 Expedition PCB
  • Place Dimension Between Two Elements . : 1. Place Dimension Between Two Elements. 2. . 3. . 4. , ( ). 18-8 • Advanced Expedition PCB: 2007 :Expedition PCB 18-7
  • Place Stacked Dimension ♦ . ♦ : 1. Place Stacked Dimension. 2. . 3. . 4. . 5. 3 - . – . 18-9 • Advanced Expedition PCB: 2007 :18-8 Expedition PCB
  • Place an Ordinate Dimension . : 1. Place Ordinate Dimension . 2. . 3. . 4. 2 – . . ! Edit > Place > Origin. ( ). Edit > Place > Origin 18-10 • Advanced Expedition PCB: 2007 :Expedition PCB 18-9
  • -X Angle From X-Axis of Linear Element ♦ : 1. Angle from X-axis for Linear Element. 2. - . 3. , . 4. , . 18-11 • Advanced Expedition PCB: 2007 :18-10 Expedition PCB
  • Angular Dimension Between Two Linear Elements 1. Angular Dimension Between Two Linear Elements. 2. . 3. . 4. . 5. , . 18-12 • Advanced Expedition PCB: 2007 :Expedition PCB 18-11
  • Place a Radius or Diameter Dimension ♦ ( ) . 1. (D Dia) (R Rad). 2. . 3. . 4. , . ♦ , , , . ( ). 18-13 • Advanced Expedition PCB: 2007 :18-12 Expedition PCB
  • ♦ ! Rotate - – , . ! Mirror - – , . ! Flip - – , . " , . " ( ). " Dimension. " , . " - , . 18-14 • Advanced Expedition PCB: 2007 :Expedition PCB 18-13
  • ( ) ♦ ! Add Text - – Place Text. – - . ! Increase/Decrease - – , . – 5th 15um - ! Dia/Rad - . – ( , ). 18-15 • Advanced Expedition PCB: 2007 :18-14 Expedition PCB
  • Drawing Cells ♦ , : ! . ! . ! . ! . ♦ ( ). ♦ Place > Place Parts and Cells Drawing Cell. 18-16 • Advanced Expedition PCB: 2007 :Expedition PCB 18-15
  • DXF ♦ Expedition PCB, DXF . ! DXF R14 . ! . ♦ : ! Lines ( ). ! Arcs ( ). ! Circles ( ). ! Polylines ( ). – - . – . ! Text ( ). ! Solid ( ). – . ! Hatch ( ). – 18-17 • Advanced Expedition PCB: 2007 :18-16 Expedition PCB
  • DXF ( ) " DXF - File > Export > DXF < _ >.dxf, pcboutput. " Expedition PCB DXF. " DXF: 1. File > Export > DXF. 2. . 3. . 4. , DXF . 18-18 • Advanced Expedition PCB: 2007 :Expedition PCB 18-17
  • ♦ . ! . – Board Outline. . 18-19 • Advanced Expedition PCB: 2007 :18-18 Expedition PCB
  • A Net Classes and Clearances : • • •Expedition PCB A-1
  • Net Classes and Clearances Net Classes Setup > Net Classes And Clearances — Net Classes ♦ . ! . ! Default . ! . ♦ . ! . ! (Default Via) Setup Parameters. ! Net Class Via. New - A-3 • Expedition PCB : Net Classes and Clearances 2007 :A-2 Expedition PCB
  • Net Classes and Clearances ( ) Setup > Net Classes And Clearances — Net Classes ♦ Minimum - ♦ Typical - ♦ Typical Impedance - - . ♦ Expansion - . , ♦ . Differential Pair Spacing. A-4 • Expedition PCB : Net Classes and Clearances 2007 :Expedition PCB A-3
  • Net Classes and Clearances ( ) Setup > Net Classes And Clearances — Clearances ♦ . ! . ! , . ♦ A-5 • Expedition PCB : Net Classes and Clearances 2007 :A-4 Expedition PCB
  • Net Classes and Clearances ( ) Setup > Net Classes And Clearances — Clearances - ♦ . 1. . 2. . 3. . 4. . 5. New. ♦ . A-6 • Expedition PCB : Net Classes and Clearances 2007 :Expedition PCB A-5
  • Net Classes and Clearances Net Rules Setup > Net Properties ♦ Net Properties : ! . ! . ♦ : ! MST: – . ! Chained: – . ! Custom: – ( ). : MST Chained Custom A-7 • Expedition PCB : Net Classes and Clearances 2007 :A-6 Expedition PCB
  • Net Classes and Clearances Netline Ordering Setup > Net Properties ♦ Custom . ♦ : 1. Net Name. 2. Custom . – Pins in net. 3. Move Right. 4. . ♦ Branch . ! . A-8 • Expedition PCB : Net Classes and Clearances 2007 :Expedition PCB A-7
  • Net Classes and Clearances Net Length Setup > Net Properties ♦ Timing & Differential Pairs . . ! Max Length or Delay: – , Manhattan . ! Match Set#: – . ! Match Set Tol: – . A-9 • Expedition PCB : Net Classes and Clearances 2007 :A-8 Expedition PCB
  • Net Classes and Clearances . Differential Pairs Setup > Net Properties ♦ . Timing & Differential Pairs. ! Diff Pair #: – . . ! Diff Pair Tol: – . ! . A-10 • Expedition PCB : Net Classes and Clearances 2007 :Expedition PCB A-9
  • Net Classes and Clearances Parallelism Setup > Net Properties . . . . Parallel Rules Factor ! , , , 1. A-11 • Expedition PCB : Net Classes and Clearances 2007 :A-10 Expedition PCB
  • Net Classes and Clearances ( ) Setup > Net Properties ♦ : 1. New. 2. Edge to Edge. 3. Max Parallel Length. 4. Enter. 5. , 1 4. A-12 • Expedition PCB : Net Classes and Clearances 2007 :Expedition PCB A-11
  • Net Classes and Clearances Stubs Setup > Net Properties ♦ Max Stub Length ! . . ! , , . ♦ Max Vias ! . ♦ # Pin On Net ! . ♦ Supply Voltage ! . ! . A-13 • Expedition PCB : Net Classes and Clearances 2007 :A-12 Expedition PCB
  • Net Classes and Clearances ♦ . ! . – , . A-14 • Expedition PCB : Net Classes and Clearances 2007 :Expedition PCB A-13
  • :Expedition PCB