1. Welcome to the
Iron Man Car
Hauler Series
(574) 343-2090
www.NewGenTrailer.com ... of trailers!
MODEL SHOWN: NGCHWDTA-8316.2
2”x6” Treated Decking
2 5/16” A-Frame
Coupler Welded Board Tucks Full Length Ramp Mount
Front & Rear Across Rear
2”X2” 16 Ga. “Cow Catcher” (2) 3500 Lb. Brake Axles With “Easy
Lube” Hubs And 205/75D/15” Tires 4 Corner Welded D-Rings
2000 Lb. Top Wind Tread Plate Steel Fenders 2’ .125 Tread Plate Beaver
Jack Tail
LED Lighting
Grommet Mount Sealed Stake Pockets & Rub Rail
Lights 2”X4” 11 Ga. Tube With Full Run Full Length Of Trailer Front & Rear Slide In Ramps Under
Wrap Tongue & Main Frame Steps Rear of Trailer
STANDARD MODEL SPECIFICATIONS
Model Deck Length Deck Height GVWR Axles Empty Weight
NGCHWDTA-8314.2 14’ + 2’ 20” 7000 Lbs. 2 X 3500 Lb. 1865 Lbs.
NGCHWDTA-8316.2 16’ + 2’ 20” 7000 Lbs. 2 X 3500 Lb. 2100 Lbs.
NGCHWDTA-8318.2 18’ + 2’ 20” 9990 Lbs. 2 X 5200 Lb. 2336 Lbs.
All models measure 83” in width between fenders
When We Designed The If you want the best way to move your cars, ATV’s, small tractors,
New Gen Iron Man and other equipment and not have to worry about product
failure, then a New Gen Iron Man is what you are looking
Car Hauler Series for. Our dealers and their customers provided input to create
the Ultimate Iron Man Series of Car Haulers. A New Gen Iron
Man Car Hauler comes standard with construction materials
We Immediately Discovered that others consider optional. We offer a wide range of options
and you can even custom order your New Gen Iron Man to
SUCCESS! meet your exact needs. Powder coat finish and a host of other
features will make your life easier!
Trailers & Manufacturing, LLC (574) 343-2090
612 Kollar Street-Elkhart, IN 46514 www.NewGenTrailer.com
Distributed by:

2. Iron Man Car Hauler Series
www.NewGenTrailer.com
Standard Beaver Tail, Under Mount Ramps and LED Lighting
Standard Model Features
Standard Front & Rear Steps Standard Front & Rear
Board Tucks
Standard D-Rings
··2” X 4” 11 Ga. Tube Tongue and Full Wrap ··2000 Lb. Side Wind Jack with “Sand Foot”
··2” X 4” 11 Ga. Tube Frame ··Stake Pockets, Rub Rails & 4 D-Rings
··1-1/2” X 2-1/2” Cross Members (24” On Center) ··(2) 3500 Lb. Brake Axle with “Easy Lube” Hubs
··2” X 2” 16 Ga. Tube “Cow Catcher” ··205/75D/15” Tires Mounted on Silver Mod Rims
··2’ Tread Plate Beaver ··2” X 6” Treated Floor with Board Tucks
··Rear Mounted Ramps with Spring Loaded Pins ··100% L.E.D. Dept. of Transportation (DOT) Lighting
··Tear Drop Tread Plate Fenders with Front & Rear Steps ··7 Way RV Plug & Break Away Battery Kit for Brakes
Powder Coat Finishes
Every New Gen Trailer we build is powder coated with PPG™ products. When you consider your first or next trailer,
a powder coat finish is far superior to conventional paint. Powder coat is extremely durable and does not crack,
chip, or peel more commonly associated with typical coatings. Powder coating is also much more rust and corrosion
resistant making it the longest lasting and most durable coating available.
Black Red White Yellow Grey Green Blue
Warranty
New Generation Trailers & Manufacturing, LLC warrants each trailer to be free from Defects in Materials and Workmanship for 24 months to the original purchaser from date of purchase, under normal use and rated load capacity.
New Generation Trailers & Manufacturing, LLC, warrants its’ finish to be free from defect as a result of improper surface preparation and application for a period of 24 months to the original purchaser from date of purchase, or 30 months from
date of manufacture, whichever expires first.
All auxiliary parts, axle assemblies, brake systems, wheels, tires, light systems, hitch couplers, jacks, power units, cylinders, or other accessories or purchased parts are covered by the warranty of the original manufacturer.
This warranty does not cover: normal wear, lack of maintenance, abuse or negligence, overloading in excess of the GVWR on the VIN sticker. Additional terms apply and can be found at www.NewGenTrailer.com
(574) 343-2090 www.NewGenTrailer.com All materials © 2012-2013 New Generation Trailers, LLC