SPECIFICATION SHEET AP 7131 The industry’s first tri-radio 802.11n access pointFEATURES The re-defined access point: power the radios over 802.3af eliminates the need a true wired network replacement to upgrade the existing Power-over-Ethernet (PoE)Unmatched RF performanceConducted transmit power The AP 7131 is the industry’s first 802.11a/b/g/n infrastructure. And the elegant industrial designof 27.7dBm and superior adaptive services access point that delivers the with an optional snap-on antenna façade enablesreceive sensitivity provide performance, coverage, reliability and security deployment from the warehouse to the front lobby.best in class range, coverageand application performance, required to enable the truly wireless enterprise. Packed with features, the AP 7131 offers the gap-even in harsh RF conditions The band-unlocked tri-radio expandable design free security and unmatched reliability you need to provides simultaneous support for three major deploy a highly successful mobility solution at a low802.11n supportwith 3X3 MIMO networking functions: high-speed wireless data, total cost of ownership (TCO).Delivers maximum wireless voice and video services for client access, self-network throughput to healing mesh networking and Wireless Intrusion Stand-alone access point: wired andsupport virtually any Prevention System (IPS) sensor functionality for wireless ‘Network in a box’ for smaller sitesenterprise application,including voice and video around the clock protection of the network. The As a stand-alone access point, the AP 7131 provides fully DFS compliant 802.11n AP 7131 offers speeds small to medium-sized businesses and enterpriseBand-unlocked of up to 600 Mbps per Access Point — six times branch offices with a consolidated wired anddual band designThe ability to dedicate multiple the bandwidth of an 802.11a/g access point. The wireless networking infrastructure, all in a singleradios to multiple functions Adaptive Services AP architecture allows the device. The integrated router gateway, 3G WANincreases security without device to offer two modes of operation, without backhaul, firewall, DHCP and AAA Radius servers,increasing costs; band-unlocked IPSec VPN, hot-spot gateway and PoE simplify changing the firmware — either as a stand-aloneradios enable 24x7 dual bandWireless IPS sensing on access point or as a wireless controller adopted and reduce the costs associated with networkingboth 2.4GHz and 5GHz with access point for centralized management. by eliminating the need to purchase and manageconcurrent 802.11a/b/g/n client Self-configuration in an 802.3af environment multiple pieces of equipment.access and mesh further simplifies deployment. The ability to
Figure1: Motorola AP 7131 with Band-Unlocked Radios More Flexibility and Lower Cost Radio 1 Radio 2 Radio 3 Client Access and Client Access and Dual-band Mesh in 2.4GHz Mesh in 5GHz Wireless IPS -or- -or- Spectrum Analyzer Dual-band Wireless Dual-band Wireless 3G IPS Sensor IPS Sensor With three band-unlocked radios in a single access point, wireless traffic can be segmented as needed between two radios to ensure performance levels for wireless access and backhaul, while the third radio can provide around-the-clock dedicated dual-band sensing. The need to purchase, power and manage dedicated sensors is eliminated — an estimated savings of $300-$400 per sensor — providing the highest level of security for the wireless LAN at the lowest possible cost.Gap-free dedicated Centrally managed access point: — typically provided by a stand-alone sensor. The24x7 sensing via triple Adaptive AP Mode AP 7131 is the first a/b/g/n access point to offermethodology rogue AP The AP 7131 is designed to cost-effectively meet concurrent around-the-clock dual-band sensingdetection: on-channel, mobileunit and dedicated radio the needs of large, distributed enterprises by and wireless traffic — eliminating the need fordual-band scanning converging the functionality of a thick access point separate devices. Integrated Wireless IPS sensorAround the clock network and thin access port into a single device. Adaptive firmware enables the configuration of one radioprotection through instant mode enables the deployment of a fully featured for 24x7 rogue detection and termination, androgue detection intelligent access point that can be centrally two others can simultaneously be dedicated toSpectrum Analysis configured and managed via a Motorola wireless wireless client access and/or meshing. As a result,The ability to place a remote controller in either corporate headquarters or a enterprises can now deploy the most robustAP-7131 in Spectrum Analysismode allows remote NOC. All traffic between the adaptive access Wireless IPS solution while saving money — theidentification of local RF points and the wireless controller is secured cost to purchase, deploy and manage dedicatedinterference, enabling remote through an encrypted tunnel. And in the event of a sensor hardware is eliminated.troubleshooting and issue WAN, distribution or core network failure, this fullyresolution from the NetworkOperation Center (NOC) or independent configuration offers a remote site In addition, stateful firewall, encryption andother centralized location survivability that enables the delivery of secure authentication support key standards-based uninterrupted wireless service in the remote security protocols that ensure enterprise-levelAdaptive AP: extendingthe enterprise location, offering unparalleled network resiliency. protection for the wired and wireless networkEnables centralized infrastructure. The powerful feature set enablesmanagement of mesh access Gap-free security security to be administered by either local,points at remote sites including To achieve true gap-free security, you need non-technical staff or remote IT professionalsautomatic firmware upgrades;provides site survivability gap-free rogue detection, requiring dedicated dual- at your headquarters.for remote locations with band sensing of 2.4GHz and 5GHz wireless LANs802.11a/b/g/n networks forunparalleled resiliency
Figure 2: AP 7131 for the Small/Medium Enterprise (SME) 3G WAN PoE Switch DSL/Cable AP 7131 Branch Office Modem Systems Server Internet WAN LAN Printer 802.11g/n (2.4GHz) 802.11a/n (5GHz)The diagram above illustrates the AP 7131 in action in small and medium-size enterprises, able to provide wireless connectivity for allclients (including .11n) as well as a redundant 3G WAN network connection, ensuring continuity of business and protecting customerservice levels despite network outages.Figure 3: AP 7131 for the Distributed Enterprise PoE Switch Cable Modem AP 7131 Wireless IPS Sensor Headquarters/NOC Spectrum Branch 1 Analyzer WAN Non- PoE AirDefense RFS 7000 Switch Management, Cluster ADSL Network Modem Assurance and Security AP 7131 Mesh Wireless IPS Sensor Branch 2The versatile AP 7131 also plays a crucial role in large distributed enterprises. When deployed in adaptive AP mode, this fully featuredintelligent access point can be centrally configured and managed via a Motorola wireless controller in either corporate headquarters ora network operations center (NOC). Yet in the event of a WAN, distribution or core network failure, the remote site survivability featureenables the AP 7131 to revert to stand-alone mode, ensuring the delivery of secure uninterrupted wireless service in remote locations,providing unparalleled network resiliency.
Mesh: cost-effective networking solution is deployed, our responsive Customer 802.3af dual-radio supportfor challenging locations Standard Power-over-Ethernet (PoE) Services keep your solution up and running, with provides power for both radios.Mesh functionality enables the cost-effective maximum uptime — reducing your total cost of Intelligent power managementwireless extension of the enterprise network to areas ownership. enables self-configuration basedwhere Ethernet or fiber cabling is cost-prohibitive or on available power. Eliminates the need to upgrade the PoEotherwise impractical. Mesh functionality includes Enterprise-class manageability — and a infrastructuremulti-node, multi-link networks as well as simple mesh rapid return on investmentto connect two wired networks. Self-healing mesh You can count on this multi-function multi-purpose Integrated router, DHCP device to deliver a rapid return on investment. server, stateful packetensures continuity of service in the event of a wired inspection firewall,or wireless network failure. The self-forming, highly The AP 7131 can be deployed as a stand-alone or AAA server, NAT, andresilient VLAN and WMM QoS-aware mesh technology centrally managed device to provide wireless voice, hotspot gatewayenables organizations to wirelessly extend reliable data and video services, mesh backhaul and Wireless Eliminates need to purchase and manage additionalhigh-performance voice, data and video services to IPS sensor functionality, all in one device. This built-in equipment. Simplifiesworkers in remote and outdoor locations. flexibility simplifies the mobility architecture — provisioning of network services there is less equipment to purchase and manage, and public accessKey ingredients: WLAN design, management reducing your capital and operational expenditures. Mesh networkingand security Special features, such as spectrum analysis, Allows wireless extensionMotorola provides full life-cycle support for your allow you to easily and remotely manage and of existing wired or wireless802.11n deployment. Motorola’s LANPlanner is a troubleshoot distributed networks. Additionally, networks in remote or outdoor locationspowerful predictive planning tool that enables the with Motorola’s AirDefense Service Platformeasy creation of a well-designed 802.11n wireless (ADSP), you enjoy unified security and 802.11i, WPA2, WPALAN that is tailored for your selected applications, management of all your AP 7131 access points, and IPSec encryption End-to-end enterprise classeliminating the high cost associated with an enabling simplified, cost-effective planning, wired and wireless securityiterative trial-and-error approach and multiple site deployment and monitoring of large AP 7131surveys. For the operational phase, Motorola networks. 3G WAN backhaulAirDefense solutions provide infrastructure Rapid network deployment with extended WAN connectivity overmanagement, network assurance and security & For more information on how your enterprise 3G. Provide 3G fail-over supportcompliance on a single efficient services platform. can benefit from the AP 7131, please visit us on for maximum remote siteMotorola Professional Services offer expertise to the web at motorola.com/wlan or access our survivability.assist with assessment through implementation of global contact directory at motorola.com/your mobility solution. Once your Motorola mobility enterprisemobility/contactusAP 7131 Specifications802.11n Capabilities User Environment• 3X3 MIMO with 2 Spatial Streams • Reduced Interframe Spacing Operating Temperature: -4°F to 122°F/-20°C to 50°C• 20 MHz and 40 MHz Channels • 802.11 DFS Storage Temperature: -40°F to 158°F/-40°C to 70°C• 300 Mbps Data Rates per Radio • MIMO Power Save Operating humidity: 5 to 95% RH non-condensing• Packet Aggregation (Static and Dynamic) (AMSDU, AMPDU) Operating altitude: 8000 ft./2438 m @ 82°F/28°CPerformance Characteristics Storage altitude: 15000 ft./4572 m @ 53°F/12°CDimensions: AP 7131: 5.50 in. L x 8.00 in. W x 1.10 in. H Electrostatic discharge: 15kV air, 8kV contact 13.97 cm L x 20.32 cm W x 2.79 cm H Power Specifications AP 7131N: 5.50 in. L x 8.00 in. W x 1.5 in. H Operating voltage: 36-57VDC 13.97 cm L x 20.32 cm W x 3.81 cm H Operating current: Not to exceed 600mA @ 48VDCWeight: AP 7131: 2.33 lbs/1.06 kg AP 7131N: 2.67 lbs/1.21 kg Integrated PoE support: 802.3af support for dual radios, 802.3at (draft)Housing: Metal, plenum-rated housing (UL2043) Networking SpecificationsAvailable mounting: No additional hardware required to mount Layer 2 and Layer 3: Layer 3 routing, 802.1q, DynDNS, DHCP server/client, BOOTP client, PPPoE, and LLDPConfigurations: Above drop ceiling, under ceiling or on wall Security: Stateful Firewall, IP filtering, NAT, 802.1x,LEDs: 6 top mounted LEDs, 1 bottom mounted LED, with 802.11i, WPA2, WPA Triple-Methodology multiple modes indicating 802.11a/g/n activity, Rogue Detection: 24x7 dual-band WIPS sensing, power, Ethernet adoption, Wireless IPS and errors MU-assisted, on-board IDS and secure guestUplink: 2 ports (GE1, GE2) Auto-sensing 10/100/1000 access (HotSpot) Base-T Ethernet; 802.3af on GE1 LAN port Quality of Service (QoS): WMM, WMM-UAPSD, 802.1p, Diffserv and TOSAntenna connectors: RP-SMAConsole port: RJ45 Console Port
Wi-Fi Multimedia (WMM™),Radio Specifications AP-7131N-66S78-US Tri-Radio 802.11n Adaptive Services Access Point, Quality of Service (QoS) andWireless medium: Direct Sequence Spread Spectrum (DSSS), 6 element Façade antenna module, with QIG voice prioritization Orthogonal Frequency Division Multiplexing AP-7131N-66E40-WR Dual Radio 802.11n Adaptive Services Access Superior performance for (OFDM) and Spatial multiplexing (MIMO) Point with integrated ExpressCard Slot, with QIG* demanding mission critical applications, including voiceNetwork standards: IEEE 802.11a/b/g/n, 802.11d and 802.11i WPA2, AP-7131N-66E48-WW Dual Radio 802.11n Adaptive Services Access and video WMM and WMM-UAPSD Point with integrated ExpressCard Slot, 6 elementData rates supported: 802.11b/g: 1,2,5.5,11,6,9,12,18,24,36,48, Façade antenna module, with QIG* MU Rate Limiting and 54Mbps AP-7131N-66E40-US Dual Radio 802.11n Adaptive Services Access Allows client-based control of 802.11a: 6,9,12,18,24,36,48, and 54Mbps Point with integrated ExpressCard Slot, with QIG bandwidth, preventing any single user from impacting network 802.11n: MCS 0-15 up to 300Mbps AP-7131N-66E48-US Dual Radio 802.11n Adaptive Services Access availabilityOperating channels: All channels from 4920 MHz to 5825 MHz Point with integrated ExpressCard Slot, 6 element Chan 1-13 (2412-2472 MHz) Façade antenna module, with QIG WAN and LAN Ethernet ports Chan 14 (2484 MHz) Japan only Single device solution for both AP-7131-66040-WR AP-7131 Dual Radio 802.11n Access Point, Actual operating frequencies depend on wired and wireless networking Plastic Façade, with QIG regulatory rules and certification agency AP-7131-66048-WR APN Dual Radio 802.11n Access Point, 6 element Java™ web-based graphical AP 7131N AP 7131 Façade antenna Module, with QIG user interface; SNMPv3;Maximum available 23 dBm 20 dBm command line interface (CLI) AP-7131-60020-WR AP 7131 Single Radio 802.11n Access Point,transmit power per Flexible management options; Plastic Façade, with QIG easy-to-use “anytime,chain: AP-7131-60028-WR AP 7131 Single Radio 802.11n Access Point, anywhere” managementMaximum available 27.7 dBm 24.5 dBm 6 element Façade antenna Module, with QIGtransmit power per AP: Integrated VPN AP-7131-60020-D-WR APN Single Radio 802.11n Access Point Cost-effective secureAntenna configuration: 3 x3 MIMO (transmit/receive on all three antennas) Dependent Mode site-to-site communicationsTransmit power 1dB increments AP-7131-66040-D-WR APN Dual Radio 802.11n Access Pointadjustment: Dependent Mode DFS compliance Increased throughput throughOperating bands: SNB-7120FL-P-1 AP 7131 Single-Radio Remote 11n Sensor greater channel availability in theFCC EU Japan (external antenna) with Full WIPS license 5 GHz bands2.412 to 2.462 GHz 2.412 to 2.472 GHz 2.412 to 2.484GHz SNB-7128FL-P-1 AP 7131 Single-Radio Remote 11n Sensor5.150 to 5.250 (UNII -1) 5.150 to 5.250 GHz 4.900 to 5.000 GHz (integrated antenna) with Full WIPS license5.250 to 5.350 (UNII -2) 5.250 to 5.350 GHz 5.150 to 5.250 GHz (W52)5.470 to 5.725 (UNII -3) 5.470 to 5.725 GHz 5.250 to 5.350 GHz (W53) SNB-7140FL-P-1 AP 7131 Dual-Radio Remote 11n Sensor (external 5.725 to 5.850 (ISM) (Country Specific) 5.470 to 5.725 GHz (W56) antenna) with Full WIPS licenseRegulatory SNB-7148FL-P-1 AP 7131 Dual-Radio Remote 11n Sensor Product safety UL / cUL 60950-1, IEC / EN60950-1, UL2043, RoHS (integrated antenna) with Full WIPS licensecertifications: 50-14000-247R AP 7131 Power SupplyRadio approvals: FCC (USA), Industry Canada, CE (Europe), TELEC AP-PSBIAS-1P3-AFR Single Port High Power 802.3at (Draft) (Japan), China, Korea, Australia, Brazil Power InjectorPart Numbers ML-2452-PTA3M3-036 3 Port MIMO AntennaAP-7131N-66S70-WR Tri-Radio 802.11n Adaptive Services Access ML-2452-PTA2M3X3-1 Façade with 6 element antenna Module Point, with QIG* KT-135628-01 AP 7131 mounting kit (optional)AP-7131N-66S78-WW Tri-Radio 802.11n Adaptive Services Access Point, M25.90001.001 Plastic façade cover for AP 7131 6 element Façade antenna module, with QIG*AP-7131N-66S70-US Tri-Radio 802.11n Adaptive Services Access * Cannot be ordered in the US Point, with QIG