PT. Integra Automasi
                     An Automation and Control Company




Address :
Komp. Mutiara Taman Palem Blok B...
Integra Automasi was established on September 2004.

We provide total solution of instrumentation and control from enginee...
PRODUCTS AND SERVICES




PROJECTS

Our projects experiences located from South Sumatera, Jambi, Jakarta, Central Java,
Ea...
PROJECT REFERENCES - 2004

Control Panel Modification – PT. PALYJA - Jakarta

PT. Palyja is operator of water treatment pl...
PROJECT REFERENCES - 2005

Smith Metering System Depot Cikampek, Pertamina UPMS

Depot Cikampek was built to cover fuel di...
Water and Steam Sampling Analyzer System, PLN UBP Suralaya, PT. Indonesia Power

Water and sampling analyzer is a continuo...
PROJECT REFERENCES - 2006

Chevron SAPI Gas Handling Facilities, Chevron Indonesia - Balikpapan

The plant is operated by ...
Timber Tracking - Smart Device Application




    Application Development project of Timber Tracking system consist of

 ...
LPG Metering System Upgrading, Pertamina RU III Plaju Palembang

Panel complete with PLC, PC and HMI Development using In-...
Oil and Gas Volume Lifting Monitoring, Ditjen MIGAS

The scope are Installing the panel complete with PLC, PC and HMI Deve...
Open Access Monitoring HMI SCADA, BPH MIGAS

Open Access project is a BPH Migas Project that purpose to connect and get pr...
PROJECT REFERENCES - 2007

Depot Automation, Pertamina Depot Plumpang UPms III

Installation, wiring and commissioning of ...
Prover Relocation-Metering System, Pertamina Depot Plumpang UPms III

Relocation of Pipeprover from Tanjung Priok Jetty Me...
Upgrading Metering System, Pertamina Depot Plumpang UPms III
Upgrading of metering system, including installation of instr...
Service Repair of Electric Actuator, Pertamina Aviation DPPU Ngurah Rai - Denpasar

The scope of work are from checking lo...
PROJECT REFERENCES - 2008

Metering and ATG System-Banyu Urip Development, Pertamina EP CEPU
Scope of work:
    Metering s...
Turbine Management Control, Pertamina RU IV - Cilacap
Scope of work: HMI and Engineering termination.




                ...
Upgrading of Metering system, Pertamina RU V, Balikpapan




Scope of work: HMI (Human Machine Interface) Development, PLC...
Scope of work: HMI (Human Machine Interface) Development, Engineering, and Wiring
termination.




                       ...
PROJECT REFERENCES – 2009

Actuator Control for Tank inlet/outlet Depo Ujungpandang, Pertamina UPMs VII

Scope of work: HM...
Ugrading Metering System – Patra Tehnik, Pertamina RU V Balikpapan
Scope of work:
             HMI (Human Machine Interfac...
22
Pub - G01.1-2010
Inventory Monitoring & Control – PT Pertamina (persero) UPMs IV – 5 Depo Jawa Tengah
Scope of work: Actuator installation,...
Depo MAOS




Depo CILACAP




                   24
Pub - G01.1-2010
DEPO PENGAPON - SEMARANG




DEPO CEPU




                           25
Pub - G01.1-2010
Upcoming SlideShare
Loading in …5
×

Integra company profile

2,014 views
1,890 views

Published on

Published in: Business, Technology
0 Comments
0 Likes
Statistics
Notes
  • Be the first to comment

  • Be the first to like this

No Downloads
Views
Total views
2,014
On SlideShare
0
From Embeds
0
Number of Embeds
3
Actions
Shares
0
Downloads
31
Comments
0
Likes
0
Embeds 0
No embeds

No notes for slide

Integra company profile

  1. 1. PT. Integra Automasi An Automation and Control Company Address : Komp. Mutiara Taman Palem Blok B7-51, Jl. Kamal Raya Outer Ring Road, Cengkareng - Jakarta Barat Indonesia – 11730 Phone : 62-21-5435 6505 Fax : 62-21-5435 6506 Website: www.integra-automasi.com Email: info@integra-automasi.com 1 Pub - G01.1-2010
  2. 2. Integra Automasi was established on September 2004. We provide total solution of instrumentation and control from engineering, procurement, construction, and maintenance services. Our people have been involved in various projects in oil and gas, petrochemical, power generation and water industry. VISION  To be a reputable instrumentation, control, and automation system integrator  To be a high quality service provider in outsourcing of service and maintenance MISSION 1. To be well-known and trusted company to deliver quality services to our customer. 2. We always develop win-win relationship, trust, and long term commitment with our partners and vendors. 3. We create a friendly, honest, creative, innovative and enjoyable environment for our people. 4. We consistently are growing the business, revenue, and profitability to our shareholder. 5. Integra continuously build a mutual benefit relationship to university as our commitment in contributing to country sustainable educational development. CREDO LOYAL, INNOVATIVE, FOCUS, ENERGY 2 Pub - G01.1-2010
  3. 3. PRODUCTS AND SERVICES PROJECTS Our projects experiences located from South Sumatera, Jambi, Jakarta, Central Java, East Java, East Kalimantan, and South Sulawesi. 3 Pub - G01.1-2010
  4. 4. PROJECT REFERENCES - 2004 Control Panel Modification – PT. PALYJA - Jakarta PT. Palyja is operator of water treatment plant in cooperation with PT. PAM Jakarta. The job is upgrading the existing control panel of Lebak Bulus Pumping Station. Fire and Gas HMI Development NEDO Project, Pertamina UP V - Balikpapan HMI - In-touch Wonderware to monitor Sieger Gas Detection System in the area of Pertamina Refinery UP V Balikpapan. 4 Pub - G01.1-2010
  5. 5. PROJECT REFERENCES - 2005 Smith Metering System Depot Cikampek, Pertamina UPMS Depot Cikampek was built to cover fuel distribution in north part of West Java area Service Repair of Electric Actuator, Total Indonesie - Balikpapan 5 Pub - G01.1-2010
  6. 6. Water and Steam Sampling Analyzer System, PLN UBP Suralaya, PT. Indonesia Power Water and sampling analyzer is a continuous analyzer for monitoring conductivity, silica content, and pH of steam and water from boiler. 6 Pub - G01.1-2010
  7. 7. PROJECT REFERENCES - 2006 Chevron SAPI Gas Handling Facilities, Chevron Indonesia - Balikpapan The plant is operated by Hanover at Senipah, East Kalimantan. The job is installation of field instrument, wiring termination, panel supply, flow computer setting and configuration, until commissioning Metering System, Terminal Tanjung Uban, Pertamina UPMs I Medan We have done installation, wiring, and commissioning of instrumentation and control for 3 metering skids at Terminal Tanjung Uban, Pertamina UPMs I. Medan. Terminal Tanjung Uban is tank farm storing facility for Premium, Kerosene, and Diesel Fuel. 7 Pub - G01.1-2010
  8. 8. Timber Tracking - Smart Device Application Application Development project of Timber Tracking system consist of  2D barcode smart device reader scan  .Net application database of Timber validation & Reporting  WiFi data transformation and XML Web Service collaboration between PC / Server and smart device (handheld) 8 Pub - G01.1-2010
  9. 9. LPG Metering System Upgrading, Pertamina RU III Plaju Palembang Panel complete with PLC, PC and HMI Development using In-touch WonderWare. Cabling and Termination for DCS System, UBP Tanjung Priok, PT. Indonesia Power 9 Pub - G01.1-2010
  10. 10. Oil and Gas Volume Lifting Monitoring, Ditjen MIGAS The scope are Installing the panel complete with PLC, PC and HMI Development. The HMI is using Intouch wonderware for monitoring Volume Lifting : Cico – Tanjung Santan Medco Energy – FSO Laksmiati Petrocina - FSO Federal 1 Pertamina EP KM-3 Plaju Pertamina EP PT. Pusri Conoco Philips – TGI Pulau Pemping 10 Pub - G01.1-2010
  11. 11. Open Access Monitoring HMI SCADA, BPH MIGAS Open Access project is a BPH Migas Project that purpose to connect and get production data from servers database each Gas station which is under BPH Migas authority. 11 Pub - G01.1-2010
  12. 12. PROJECT REFERENCES - 2007 Depot Automation, Pertamina Depot Plumpang UPms III Installation, wiring and commissioning of instrumentation and control 50 Rotork Actuator, HMI, and PLC programming at Depot Plumpang UPms III. 12 Pub - G01.1-2010
  13. 13. Prover Relocation-Metering System, Pertamina Depot Plumpang UPms III Relocation of Pipeprover from Tanjung Priok Jetty Meter to Plumpang Depot Balongan Pipeline Metering system. 13 Pub - G01.1-2010
  14. 14. Upgrading Metering System, Pertamina Depot Plumpang UPms III Upgrading of metering system, including installation of instrumentation, wiring termination, panel, HMI & PLC programming. Connector SAP Reporting System, Pertamina Depot Plumpang SAP is an ERP (Enterprise Resources Planning) program which used on central office PT. Pertamina in Jakarta to manage reporting from all Pertamina depot in Indonesia. This project is developing Connector SAP Program based on SAP database in central office so that can make a report more effective, real-time, accurate and reliable 14 Pub - G01.1-2010
  15. 15. Service Repair of Electric Actuator, Pertamina Aviation DPPU Ngurah Rai - Denpasar The scope of work are from checking local-remote indication actuator, repair and change actuator parts which not work properly, and disassembly some actuators from valves to get over hole service, re-assembly actuators onto valves, re-setting and commissioning. It is including testing command and feedback from and to Yamatake DCS Installation of Electric Actuator and ESDV, Pertamina Depot Rewulu - Teras The project scopes are installation, wiring and commissioning of instrumentation, electric actuator and ESDV (Emergency Shut Down Valve) at Depot Pertamina Rewulu - Teras. 15 Pub - G01.1-2010
  16. 16. PROJECT REFERENCES - 2008 Metering and ATG System-Banyu Urip Development, Pertamina EP CEPU Scope of work: Metering system complete with coriolis massflow meter, master meter, flow computer, and skid meter ATG (automatic tank gauging). Fuel Management System, STPI (Sekolah Tinggi Penerbangan Indonesia), Curug Scope of work: Refueling System, ATG (automatic tank gauging) and HMI and Database application 16 Pub - G01.1-2010
  17. 17. Turbine Management Control, Pertamina RU IV - Cilacap Scope of work: HMI and Engineering termination. 17 Pub - G01.1-2010
  18. 18. Upgrading of Metering system, Pertamina RU V, Balikpapan Scope of work: HMI (Human Machine Interface) Development, PLC Programming, Engineering, and Wiring termination. Lube Oil Metering system, Pertamina Produksi Pelumas Jakarta – Tanjung Priuk 18 Pub - G01.1-2010
  19. 19. Scope of work: HMI (Human Machine Interface) Development, Engineering, and Wiring termination. 19 Pub - G01.1-2010
  20. 20. PROJECT REFERENCES – 2009 Actuator Control for Tank inlet/outlet Depo Ujungpandang, Pertamina UPMs VII Scope of work: HMI (Human Machine Interface) Development, Integration with ATG System, and Wiring Termination 10 km Crude Oil Pipeline, Petriochina Tuban 20 Pub - G01.1-2010
  21. 21. Ugrading Metering System – Patra Tehnik, Pertamina RU V Balikpapan Scope of work: HMI (Human Machine Interface) Configuration of Thermo Fisher Flow Computer Radar Tank Gauging – PT Indonesia Power [UBP Priok] – PT PLN (persero) Scope of work: Supply Radar Tank Gauging, configuration & Installation, Tank Side & wiring termination, Field Control Unit [PLC+Display], HMI (Human Machine Interface) 21 Pub - G01.1-2010
  22. 22. 22 Pub - G01.1-2010
  23. 23. Inventory Monitoring & Control – PT Pertamina (persero) UPMs IV – 5 Depo Jawa Tengah Scope of work: Actuator installation, configuration & termination, Servo ATG integration, PLC programming & installation, HMI (Human Machine Interface), Connector to MySAP Pertamina. DEPO TEGAL 23 Pub - G01.1-2010
  24. 24. Depo MAOS Depo CILACAP 24 Pub - G01.1-2010
  25. 25. DEPO PENGAPON - SEMARANG DEPO CEPU 25 Pub - G01.1-2010

×