Electrical works

  • 297 views
Uploaded on

 

More in: Business , Technology
  • Full Name Full Name Comment goes here.
    Are you sure you want to
    Your message goes here
    Be the first to comment
    Be the first to like this
No Downloads

Views

Total Views
297
On Slideshare
0
From Embeds
0
Number of Embeds
0

Actions

Shares
Downloads
5
Comments
0
Likes
0

Embeds 0

No embeds

Report content

Flagged as inappropriate Flag as inappropriate
Flag as inappropriate

Select your reason for flagging this presentation as inappropriate.

Cancel
    No notes for slide

Transcript

  • 1. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section 1 40/16 BSEN60947 IP65 1/18 1/18 AC23A 3 1 40/16 BSEN60947 IP65 2/18 2/18 AC23A 3 15 3 40/16 BSEN60947 IP65 3/18 3/18 AC23A 3 3 40/16 BSEN60947 IP65 4/18 4/18 AC23A 3 15 1 60 BSEN60947-3 IP65 5/18 5/18 AC23A 1 60 BSEN60947-3 IP65 6/18 6/18 AC23A 15 60 3 7/18 7/18 60 3 8/18 8/18 15 3 100 BSEN60947-3 IP65 9/18 9/18 AC23A 3 150 BSEN60947-3 IP65 10/18 10/18 AC23A 1 40/16 BSEN60947 IP65 11/18 11/18 AC23A 3 3 300/250 BSEN60947 IP65 12/18 12/18 AC23A 3BOQ 2012 1
  • 2. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section 3 600/400 BSEN60947 IP65 13/18 13/18 AC23A 3 3 1000/800 IP65 14/18 14/18 BSEN60947-3, AC23A board) (Form3, Cubical 4 225 150 MCCB 60/160 Outgoing MCCBs 15/18 15/18-A Extension Box MCCBs to BSEN60947-2 board) (Form3, Cubical 4 225 150 MCCB 60/160 Outgoing MCCBs 15/18 15/18-B Extension Box MCCBs to BSEN60947-2 Outgoing board) (Form3, Cubical 4 225 150 MCCB 60/160 Outgoing MCCBs Extension Box MCCBs to BSEN60947-2 16/18 16/18-A 3 250 3 60/160 6 board) (Form3, Cubical 4 150 MCCB 60/160 Outgoing MCCBs Extension Box MCCBs to BSEN60947-2 225 16/18 16/18-B 3 250 3 60/160 6 Outgoing board) (Form3, Cubical 4 225 150 MCCB 60/160 Outgoing MCCBs Extension Box MCCBs to BSEN60947-2 17/18 17/18-A 3 250 3 60/160 8 board) (Form3, Cubical 4 225 150 MCCB 60/160 Outgoing MCCBs Extension Box MCCBs to BSEN60947-2 17/18 17/18-B 3 250 3 60/160 8 Outgoing board) (Form3, Cubical 4 225 150 MCCB 60/160 Outgoing MCCBs Extension Box MCCBs to BSEN60947-2 18/18 18/18-A 3 250 3 60/160 10BOQ 2012 2
  • 3. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section board) (Form3, Cubical 4 225 150 MCCB 60/160 Outgoing MCCBs Extension Box MCCBs to BSEN60947-2 18/18 18/18-B 3 250 3 60/160 10 Outgoing board) (Form3, Cubical 4 225 150 MCCB 60/160 Outgoing MCCBs Extension Box MCCBs to BSEN60947-2 19/18 19/18-A 3 250 3 60/160 12 board) (Form3, Cubical 4 150 MCCB 60/160 Outgoing MCCBs Extension Box MCCBs to BSEN60947-2 225 19/18 19/18-B 250 3 60/160 12 Outgoing 3 board) (Form3, Cubical 4 225 150 MCCB 60/160 Outgoing MCCBs Extension Box MCCBs to BSEN60947-2 20/18 20/18 Outgoing 3 400 R, Y 2 240/415 1 1 200 B board) (Form3, Cubical 4 225 150 MCCB 60/160 Outgoing MCCBs Extension Box MCCBs to BSEN60947-2 Outgoing 3 400 21/18 21/18 R, Y 2 240/415 1 1 400 6 200 B 3 board) (Form3, Cubical 4 225 150 MCCB 60/160 Outgoing MCCBs Extension Box MCCBs to BSEN60947-2 Outgoing 3 400 22/18 22/18 R, Y 2 240/415 1 1 400 8 200 B 3BOQ 2012 3
  • 4. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section board) (Form3, Cubical 4 225 150 MCCB 60/160 Outgoing MCCBs Extension Box MCCBs to BSEN60947-2 Outgoing 3 400 23/18 23/18 R, Y 2 240/415 1 1 400 10 200 B 3 board) (Form3, Cubical 4 225 150 MCCB 60/160 Outgoing MCCBs Extension Box MCCBs to BSEN60947-2 Outgoing 3 400 24/18 24/18 R, Y 2 240/415 1 1 12 200 B 3 400 board) (Form3, Cubical 4 225 150 MCCB 60/160 Outgoing MCCBs Extension Box MCCBs to BSEN60947-2 Outgoing 3 400 25/18 25/18-A R, Y 2 240/415 1 1 6 200 B 3 600 board) (Form3, Cubical 4 225 150 MCCB 60/160 Outgoing MCCBs Extension Box MCCBs to BSEN60947-2 Outgoing 3 400 25/18 25/18-B R, Y 2 240/415 1 1 6 200 B 400 3 600 board) (Form3, Cubical 4 225 150 MCCB 60/160 Outgoing MCCBs Extension Box MCCBs to BSEN60947-2 Outgoing 3 400 26/18 26/18-A R, Y 2 240/415 1 1 12 200 B 3 600BOQ 2012 4
  • 5. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section board) (Form3, Cubical 4 225 150 MCCB 60/160 Outgoing MCCBs Extension Box MCCBs to BSEN60947-2 Outgoing 3 400 26/18 26/18-B R, Y 2 240/415 1 1 12 200 B 400 3 600 board) (Form3, Cubical 4 225 150 MCCB 60/160 Outgoing MCCBs Extension Box MCCBs to BSEN60947-2 Outgoing 3 400 27/18 27/18-A R, Y 2 240/415 1 1 6 200 B 3 800 board) (Form3, Cubical 4 225 150 MCCB 60/160 Outgoing MCCBs Extension Box MCCBs to BSEN60947-2 Outgoing 3 400 27/18 27/18-B R, Y 2 240/415 1 1 6 200 B 400 3 800 board) (Form3, Cubical 4 225 150 MCCB 60/160 Outgoing MCCBs Extension Box MCCBs to BSEN60947-2 Outgoing 3 400 28/18 28/18-A R, Y 2 240/415 1 1 400 6 200 B 3 800 12 3 board) (Form3, Cubical 4 225 150 MCCB 60/160 Outgoing MCCBs Extension Box MCCBs to BSEN60947-2 Outgoing 3 400 28/18 28/18-B R, Y 2 240/415 1 1 400 6 200 B 3 800 12 3 400BOQ 2012 5
  • 6. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section board) (Form3, Cubical 4 225 150 MCCB 60/160 Outgoing MCCBs Extension Box MCCBs to BSEN60947-2 Outgoing 3 400 R, Y 2 240/415 1 1 29/18 29/18 400 6 200 B 3 800 12 3 1000 10 400 3 board) (Form3, Cubical 4 225 150 MCCB 60/160 Outgoing MCCBs Extension Box MCCBs to BSEN60947-2 Outgoing 3 400 30/18 30/18 R, Y 2 240/415 1 1 400 6 200 B 3 1000 12 3 400 Analogue Meter Pack 31/18 31/18 R, Y, B 2 240/415 Moulded TP blanking plate 32/18 32/18 4 BS5486 & BSEN60439-3 3 BSEN60898 (IEC898 MCB 1 63 5 RCCB 3 60 30 10KA 33/18 33/18-A 200 100 BSEN61008 4 BS5486 & BSEN60439-3 3 BSEN60898 (IEC898 MCB 1 63 5 RCCB 3 60 30 10KA 33/18 33/18-B 200 100 BSEN61008 4 BS5486 & BSEN60439-3 3 BSEN60898 (IEC898 MCB 1 63 5 RCCB 3 60 30 10KA 34/18 34/18-A 200 100 BSEN61008 63 3 6 RCCB 3 100 4 BS5486 & BSEN60439-3 3 BSEN60898 (IEC898 MCB 1 63 5 RCCB 3 60 30 10KA 34/18 34/18-B 200 100 BSEN61008BOQ 2012 6
  • 7. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section 4 BS5486 & BSEN60439-3 3 BSEN60898 (IEC898 MCB 1 63 5 RCCB 3 60 30 10KA 35/18 35/18-A 200 100 BSEN61008 100 60 3 8 RCCB 3 4 BS5486 & BSEN60439-3 3 BSEN60898 (IEC898 MCB 1 63 5 RCCB 3 60 30 10KA 35/18 35/18-B 200 100 BSEN61008 100 60 3 8 RCCB 3 4 BS5486 & BSEN60439-3 3 BSEN60898 (IEC898 MCB 1 63 5 RCCB 3 60 30 10KA 36/18 36/18-A 200 100 BSEN61008 100 3 10 RCCB 3 4 BS5486 & BSEN60439-3 3 BSEN60898 (IEC898 MCB 1 63 5 RCCB 3 60 30 10KA 36/18 36/18-B 200 100 BSEN61008 100 3 10 RCCB 3 4 BS5486 & BSEN60439-3 3 BSEN60898 (IEC898 MCB 1 63 5 RCCB 3 60 30 10KA 37/18 37/18-A 200 100 BSEN61008 100 3 12 RCCB 3 4 BS5486 & BSEN60439-3 3 BSEN60898 (IEC898 MCB 1 63 5 RCCB 3 60 30 10KA 37/18 37/18-B 200 100 BSEN61008 100 3 12 RCCB 3BOQ 2012 7
  • 8. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section 4 BS5486 & BSEN60439-3 3 BSEN60898 (IEC898 MCB 1 63 5 RCCB 3 60 30 10KA 38/18 38/18-A 200 100 BSEN61008 MCCB 3 225/150 Outgoing 4 BS5486 & BSEN60439-3 3 BSEN60898 (IEC898 MCB 1 63 5 RCCB 3 60 30 10KA 38/18 38/18-B 200 100 BSEN61008 MCCB 3 225/150 3 6 Outgoing 4 BS5486 & BSEN60439-3 3 BSEN60898 (IEC898 MCB 1 63 5 RCCB 3 60 30 10KA 38/18 38/18-C 200 100 BSEN61008 MCCB 3 225/150 3 8 Outgoing 4 BS5486 & BSEN60439-3 3 BSEN60898 (IEC898 MCB 1 63 5 RCCB 3 60 30 10KA 38/18 38/18-D 200 100 BSEN61008 MCCB 3 225/150 3 10 Outgoing 4 BS5486 & BSEN60439-3 3 BSEN60898 (IEC898 MCB 1 63 5 RCCB 3 60 30 10KA 38/18 38/18-E 200 100 BSEN61008 MCCB 3 225/150 3 12 Outgoing 4 BS5486 & BSEN60439-3 3 BSEN60898 (IEC898 MCB 1 63 5 RCCB 3 60 30 10KA 38/18 38/18-F 200 100 BSEN61008 MCCB 3 225/150 3 16 Outgoing Cable Entry Box 39/18 39/18-A MCB/RCCB KIT 39/18 39/18-B 3 4 RCCB 3 60 30 MCB 10/15/20/30 40/18 40/18-A 3BOQ 2012 8
  • 9. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section 3 4 RCCB 3 60 30 MCB 10/15/20/30 40/18 40/18-B 6/8 3 5/10/15/20/30 4 1 MCB) ( 60898 63/40 41/18 41/18 IEC898), 10KA 5/10/15/20/30 4 1 MCB) ( 60898 63/40 42/18 42/18 6 IEC898), 10KA 5/10/15/20/30 4 1 MCB) ( 60898 63/40 43/18 43/18 8 IEC898), 10KA 5/10/15/20/30 4 1 MCB) ( 60898 63/40 44/18 44/18 10 IEC898), 10KA 5/10/15/20/30 4 1 MCB) ( 60898 63/40 45/18 45/18 12 IEC898), 10KA 5/10/15/20/30 4 1 MCB) ( 60898 63/40 63/45 IEC898), 10KA 46/18 46/18 100 30 BSEN61008 RCCB 5/10/15/20/30 4 1 MCB) ( 60898 63/40 63/45 IEC898), 10KA 47/18 47/18 100 30 BSEN61008 RCCB 6 5/10/15/20/30 4 1 MCB) ( 60898 63/40 63/45 IEC898), 10KA 48/18 48/18 100 30 BSEN61008 RCCB 8 5/10/15/20/30 4 1 MCB) ( 60898 63/40 63/45 IEC898), 10KA 49/18 49/18 100 30 BSEN61008 RCCB 10BOQ 2012 9
  • 10. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section 5/10/15/20/30 4 1 MCB) ( 60898 63/40 63/45 IEC898), 10KA 50/18 50/18 100 30 BSEN61008 RCCB 12 63 RCCBs 1 2 4 60 Isolator Lights 1 51/18 51/18-A 5/10/15/20/30/60 1 63 RCCBs 1 2 4 60 Isolator Lights 1 51/18 51/18-B 5/10/15/20/30/60 1 6+4 63 RCCBs 1 2 4 60 Isolator Lights 1 51/18 51/18-C 5/10/15/20/30/60 1 8+2 63 RCCBs 1 2 4 60 Isolator Lights 1 51/18 51/18-D 5/10/15/20/30/60 1 10+2 63 RCCBs 1 2 4 60 Isolator Lights 1 51/18 51/18-E 5/10/15/20/30/60 1 10+4 63 RCCBs 1 2 4 60 Isolator Lights 1 51/18 51/18-F 5/10/15/20/30/60 1 12+4 63 RCCBs 1 2 4 60 Isolator Lights 1 5/10/15/20/30/60 1 51/18 51/18-G 100 RCCBs Isolator 100 12+6 1 63 RCCBs 1 2 4 60 Isolator Lights 1 5/10/15/20/30/60 1 52/18 52/18 3 60 Isolator 3 63 RCCBs 3 2+2BOQ 2012 10
  • 11. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section 63 RCCBs 1 2 4 60 Isolator Lights 1 5/10/15/20/30/60 1 53/18 53/18 3 60 Isolator 3 63 RCCBs 3 2+2 3 100 63 RCCBs 1 2 4 60 Isolator Lights 1 5/10/15/20/30/60 1 54/18 54/18 3 60 Isolator 3 63 RCCBs 3 2+2 3 2 4 3 100 3 60 Isolator 63 RCCBs 63 RCCBs 1 2 4 60 Isolator Lights 1 5/10/15/20/30/60 1 3 60 Isolator 3 63 RCCBs 3 2+2 55/18 55/18 3 2 4 3 100 100 3 60 Isolator 63 RCCBs 3 63 RCCBs 1 2 4 60 Isolator Lights 1 5/10/15/20/30/60 1 3 60 Isolator 3 63 RCCBs 3 2+2 56/18 56/18 3 2 4 3 100 100 3 60 Isolator 63 RCCBs 63 RCCBs 3 2 6 3 3 100 Isolator 63 RCCBs 1 2 4 60 Isolator Lights 1 5/10/15/20/30/60 1 57/18 57/18 3 60 Isolator 3 63 RCCBs 3 2+2 3 2 4 3 100 3 60 Isolator 63 RCCBs 63 RCCBs 1 2 4 60 Isolator Lights 1 5/10/15/20/30/60 1 3 60 Isolator 3 63 RCCBs 3 2+2 58/18 58/18 3 2 4 3 100 3 2 8 3 60 Isolator 63 RCCBs 3 100 Isolator 63 RCCBsBOQ 2012 11
  • 12. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section 63 RCCBs 1 2 4 60 Isolator Lights 1 5/10/15/20/30/60 1 3 60 Isolator 3 63 RCCBs 3 2+2 59/18 59/18 3 2 4 3 100 3 4 8 3 60 Isolator 63 RCCBs 3 100 63 63 RCCBs 1 2 4 60 Isolator Lights 1 5/10/15/20/30/60 1 3 60 Isolator 3 63 RCCBs 3 2+2 60/18 60/18 3 2 4 3 100 3 4 8 3 60 Isolator 63 RCCBs 3 Isolator 63 63 RCCBs A, TP MCCB 1000 3 1000 61/18 61/18 BSEN60947-2 Ics= 50KA as a minimum A, TP MCCB 1000 3 1000 BSEN60947-2 Ics= 50KA as a minimum 62/18 62/18 MCCB 3 800 A, TP MCCB 1000 3 1000 BSEN60947-2 Ics= 50KA as a minimum 63/18 63/18 MCCB 3 650/300 A, TP MCCB 1000 3 1000 BSEN60947-2 Ics= 50KA as a minimum 64/18 64/18 MCCB 3 400/300 A, TP MCCB 1000 3 1000 BSEN60947-2 Ics= 50KA as a minimum 65/18 65/18 50KA 15 3 250 A, TP MCCB 1000 3 1000 BSEN60947-2 Ics= 50KA as a minimum 66/18 66/18 MCCB 3 225/160 A, TP MCCB 1000 3 1000 BSEN60947-2 Ics= 50KA as a minimum 67/18 67/18 MCCB 3 125 A, TP MCCB 1000 3 1000 BSEN60947-2 Ics= 50KA as a minimum 68/18 68/18 MCCB 3 100/15 A, TP MCCB 1000 3 1000 BSEN60947-2 Ics= 50KA as a minimum 69/18 69/18 MCCB 1 100/30BOQ 2012 12
  • 13. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section BSEN60898 MCB 3 100/80 70/18 70/18 IEC898)- 10KA BSEN60898 MCB 3 100/80 71/18 71/18 MCB 3 15/60 IEC898)- 10KA BSEN60898 MCB 3 100/80 72/18 72/18 MCB 1 10/60 IEC898)- 10KA BSEN61008 RCCB 3 63/25 200 300/30 73/18 73/18 BSEN61008 RCCB 3 63/25 200 300/30 74/18 74/18 RCCB 3 100/80 BSEN61008 RCCB 3 63/25 200 300/30 75/18 75/18 RCCB 3 125 BSEN61008 RCCB 3 63/25 200 300/30 76/18 76/18 RCCB 1 100 BSEN61008 RCCB 3 63/25 200 300/30 77/18 77/18 RCCB 1 63/30 500/30 ELR MCCB 300 78/18 78/18 RCBO 79/18 79/18 1 63 6 BSEN61009-1, 10KA BSEN60947-2 ACB 1250/1000 80/18 80/18 BSEN60947-2 ACB 1250/1000 2000/1600 81/18 81/18 BSEN60947-2 ACB 1250/1000 82/18 82/18 2500 83/18 83/18 3 1600 800 ACB 2000 ACB 3 1600 800 ACB 84/18 84/18 2500BOQ 2012 13
  • 14. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section 3 ACB 85/18 85/18 IEC-529 15 25 30 86/18 86/18 Mounting Plate, Studs ...Etc IEC-529 15 25 30 87/18 87/18 20 30 40 Mounting Plate, Studs ...Etc IEC-529 15 25 30 88/18 88/18 20 40 60 Mounting Plate, Studs ...Etc IEC-529 15 25 30 89/18 89/18 20 60 80 Mounting Plate, Studs ...Etc IEC-529 15 25 30 90/18 90/18 30 80 100 Mounting Plate, Studs ...Etc 200 60 Cutout Box 91/18 91/18 200 60 Cutout Box Bus-Bars, Rotary Drive 250/225 92/18 92/18 Direct/Operating Shaft ..Etc 200 60 Cutout Box Bus-Bars, Rotary Drive 250/225 93/18 93/18 400/300 Direct/Operating Shaft ..Etc GRP Mounting Plate 60 40 25 94/18 94/18 Studs ...Etc GRP Mounting Plate 60 40 25 95/18 95/18 80 60 25 Studs ...Etc GRP Mounting Plate 60 40 25 96/18 96/18 85 55 30 Studs ...Etc GRP Mounting Plate 60 40 25 97/18 97/18 85 60 20 Studs ...Etc GRP Mounting Plate 60 40 25 98/18 98/18 100 60 25 Studs ...EtcBOQ 2012 14
  • 15. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section GRP Mounting Plate 60 40 25 99/18 99/18 100 80 30 Studs ...Etc GRP Mounting Plate 60 40 25 100/18 100/18 120 85 30 Studs ...Etc GRP Mounting Plate 60 40 25 101/18 101/18 140 80 30 Studs ...Etc GRP Mounting Plate 60 40 25 102/18 102/18 45 40 20 Studs ...Etc GRP Mounting Plate 60 40 25 103/18 103/18 52 50 20 Studs ...Etc 3 104/18 104/18 MCCB board 3 105/18 105/18 1 106/18 106/18 107/18 107/18 4/6/8 3 108/18 108/18 3 10 20 Solid Copper Rods Concrete Inspection Pit, 30x30x30cm BS7430, BS6651 109/18 109/18 coupling, spike, stud, clamps ..etc s Electrode 20 Solid Copper Rods Concrete Inspection Pit, 30x30x30cm BS7430, BS6651 110/18 110/18 coupling, spike, stud, clamps ..etc 15/16 s Electrode 20 Solid Copper Rods Concrete Inspection Pit, 30x30x30cm BS7430, BS6651 coupling, spike, stud, clamps ..etc 111/18 111/18 15/16 s Electrode Copper-Bond Rod ADDC 112/18 112/18 3 ADDCBOQ 2012 15
  • 16. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section Schematic Diagram 113/18 113/18 3 Modular, Self Capacitor Bank Unit Healing, Dry type, With Individual Discharge Resistor and Over Pressure 114/18 114/18 Dissconnectors, 440 Volt +10% Over voltage - 30% Over current KVAR, 3 steps as minimum 30 20 114/18 114/18-A KVAR, 4 steps as minimum 50 35 114/18 114/18-B KVAR, 5 steps as minimum 70 55 114/18 114/18-C KVAR, 6 steps as minimum 100 75 114/18 114/18-D KVAR, 8 steps as minimum 150 110 114/18 114/18-E KVAR, 10 steps as minimum 200 160 114/18 114/18-F KVAR, 12 steps as minimum 300 210 114/18 114/18- KVAR, 12 steps as minimum 400 310 114/18 114/18-H 115/18 115/18 100 3 115/18 115/18-A 5/300 5/200 3 115/18 115/18-B 5/300 5/200 3 115/18 115/18-C 5/300 115/18 115/18-D 116/18 116/18 100 3 116/18 116/18-A 5/300 5/200 3 116/18 116/18-B 5/300 116/18 116/18-C 100 1 117/18 117/18-A 500 101 117/18 117/18-B 1000 501 117/18 117/18-C 1/19-00 80 Cable Glands/Ties 2 XLPE/SWA/PVC) 1 630 1/19 1/19 2 XLPE/SWA/PVC) 2 1.5 2/19 2/19 2 XLPE/SWA/PVC) 2 2.5 3/19 3/19 2 XLPE/SWA/PVC) 2 4 4/19 4/19 2 XLPE/SWA/PVC) 2 6 5/19 5/19 2 XLPE/SWA/PVC) 2 10 6/19 6/19BOQ 2012 16
  • 17. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section 2 XLPE/SWA/PVC) 2 16 7/19 7/19 2 XLPE/SWA/PVC) 2 25 8/19 8/19 2 XLPE/SWA/PVC) 3 2.5 9/19 9/19 2 XLPE/SWA/PVC) 3 4 10/19 10/19 2 XLPE/SWA/PVC) 3 6 11/19 11/19 2 XLPE/SWA/PVC) 3 10 12/19 12/19 2 XLPE/SWA/PVC) 3 16 13/19 13/19 2 XLPE/SWA/PVC) 3 25 14/19 14/19 2 1.5 4 XLPE/SWA/PVC 15/19 15/19 2 2.5 4 XLPE/SWA/PVC 16/19 16/19 2 4 4 XLPE/SWA/PVC 17/19 17/19 2 6 4 XLPE/SWA/PVC 18/19 18/19 2 10 4 XLPE/SWA/PVC 19/19 19/19 2 16 4 XLPE/SWA/PVC 20/19 20/19 2 25 4 XLPE/SWA/PVC 21/19 21/19 2 35 4 XLPE/SWA/PVC 22/19 22/19 2 50 4 XLPE/SWA/PVC 23/19 23/19 2 70 4 XLPE/SWA/PVC 24/19 24/19 2 95 4 XLPE/SWA/PVC 25/19 25/19 2 120 4 XLPE/SWA/PVC 26/19 26/19 2 150 4 XLPE/SWA/PVC 27/19 27/19 2 185 4 XLPE/SWA/PVC 28/19 28/19 2 240 4 XLPE/SWA/PVC 29/19 29/19 2 300 4 XLPE/SWA/PVC 30/19 30/19 2 1.5 3 70 31/19 31/19-A 2 2.5 3 70 31/19 31/19-B 2 4 3 70 31/19 31/19-C 2 6 3 70 31/19 31/19-D 2 10 3 70 31/19 31/19-E 2 16 3 70 31/19 31/19-F 2 1.5 3 70 32/19 32/19-A 2 2.5 3 70 32/19 32/19-B 2 4 3 70 32/19 32/19-C 2 6 3 70 32/19 32/19-D 2 10 3 70 32/19 32/19-E 2 16 3 70 32/19 32/19-FBOQ 2012 17
  • 18. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section 2 1.5 3 105 33/19 33/19-A 2 2.5 3 105 33/19 33/19-B 2 4 3 105 33/19 33/19-C 2 6 3 105 33/19 33/19-D 2 10 3 105 33/19 33/19-E 2 16 3 105 33/19 33/19-F 2 1.5 5 70 34/19 34/19-A 2 2.5 5 70 34/19 34/19-B 2 4 5 70 34/19 34/19-C 2 6 5 70 34/19 34/19-D 2 10 5 70 34/19 34/19-E 2 16 5 70 34/19 34/19-F 2 1.5 5 85 35/19 35/19-A 2 2.5 5 85 35/19 35/19-B 2 4 5 85 35/19 35/19-C 2 6 5 85 35/19 35/19-D 2 10 5 85 35/19 35/19-E 2 16 5 85 35/19 35/19-F 2 25 5 85 35/19 35/19-G 2 35 5 85 35/19 35/19-H 2 50 5 85 35/19 35/19-I 2 70 5 85 35/19 35/19-J 2 95 5 85 35/19 35/19-K 2 1.5 3 105 36/19 36/19-A 2 2.5 5 105 36/19 36/19-B 2 4 5 105 36/19 36/19-C 2 6 5 105 36/19 36/19-D 2 10 5 105 36/19 36/19-E 2 16 5 105 36/19 36/19-F PVC 37/19-00 2 1.5 3 PVC 37/19 37/19 2 2,5 3 PVC 38/19 38/19 2 4 3 PVC 39/19 39/19 2 6 3 PVC 40/19 40/19BOQ 2012 18
  • 19. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section 2 10 3 PVC 41/19 41/19 2 16 3 PVC 42/19 42/19 2 25 3 PVC 43/19 43/19 24 5 PVC 44/19 44/19 26 5 PVC 45/19 45/19 2 10 5 PVC 46/19 46/19 2 16 5 PVC 47/19 47/19 2 25 5 PVC 48/19 48/19 2 25 1 35 4 PVC 49/19 49/19 2 35 1 50 4 PVC 50/19 50/19 2 50 1 70 4 PVC 51/19 51/19 2 1,5 52/19 52/19-A 2 2,5 52/19 52/19-A 2 4 52/19 52/19-C 2 6 52/19 52/19-D 2 10 52/19 52/19-E 2 16 52/19 52/19-F 2 25 52/19 52/19-G 2 35 52/19 52/19-H 2 50 52/19 52/19-I 2 70 52/19 52/19-J 2 95 52/19 52/19-K 2 120 52/19 52/19-L 2 150 52/19 52/19-M 16 4 Cable Joint 53/19 53/19 2 25 4 Cable Joint 54/19 54/19 2 35 4 Cable Joint 55/19 55/19 2 50 4 Cable Joint 56/19 56/19 2 70 4 Cable Joint 57/19 57/19 2 95 4 Cable Joint 58/19 58/19 2BOQ 2012 19
  • 20. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section 120 4 Cable Joint 59/19 59/19 2 150 2/4 185 4 Cable Joint 60/19 60/19 2 240 4 Cable Joint 61/19 61/19 2 300 2/4 Earth Tag &Shroud Cable Gland 62/19 62/19 2 6 2 2 2.5 2 Earth Tag &Shroud Cable Gland 63/19 63/19 2 25 2 2 10 2 Earth Tag &Shroud Cable Gland 64/19 64/19 2 6 4 2 2.5 4 Earth Tag &Shroud Cable Gland 65/19 65/19 2 16 4 2 10 4 Earth Tag &Shroud Cable Gland 66/19 66/19 2 35 4 2 25 4 Earth Tag &Shroud Cable Gland 67/19 67/19 2 70 4 2 50 4 Earth Tag &Shroud Cable Gland 68/19 68/19 2 150 4 2 95 4 Earth Tag &Shroud Cable Gland 69/19 69/19 2 240 4 2 185 4 Earth Tag &Shroud Cable Gland 70/19 70/19 2 300 4 50 50 hot dip galvanised metal trunk 1/20 1/20 75 75 hot dip galvanised metal trunk 2/20 2/20 100 100 hot dip galvanised metal trunk 3/20 3/20 150 100 hot dip galvanised metal trunk 4/20 4/20 150 150 hot dip galvanised metal trunk 5/20 5/20 Bend 90 45 6/20 6/20 Intersection 7/20 7/20 Reducer 8/20 8/20 End Cap/Flanged Coupling/Coupler 9/20 9/20 hot dip galvanised metal tray to BS ENO 1461 10/20 10/20 1.5 50 100 10/20 10/20-ABOQ 2012 20
  • 21. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section 1.5 50 150 10/20 10/20-B 1,5 50 225 10/20 10/20-C 1,5 50 300 10/20 10/20-D 1,5 50 450 10/20 10/20-E 1,5 50 600 10/20 10/20-F hot dip galvanised metal tray to BS 11/20 11/20 Fixing Clips ENO 1461 1.2 20 108 11/20 11/20-A 1.2 20 158 11/20 11/20-B 1.2 20 233 11/20 11/20-C 1.2 20 308 11/20 11/20-D 1.2 20 458 11/20 11/20-E 1.2 20 608 11/20 11/20-F 1.5x50 mm / Elbow To BS ENO 1461 12/20 12/20-A 100 Hot Dip Galvanised Steel 1.5x50 mm / Elbow To BS ENO 1461 12/20 12/20-B 150 Hot Dip Galvanised Steel 1.5x50 mm / Elbow To BS ENO 1461 12/20 12/20-C 225 Hot Dip Galvanised Steel 1.5x50 mm / Elbow To BS ENO 1461 12/20 12/20-D 300 Hot Dip Galvanised Steel 1.5x50 mm / Elbow To BS ENO 1461 12/20 12/20-E 450 Hot Dip Galvanised Steel 1.5x50 mm / Elbow To BS ENO 1461 12/20 12/20-F 600 Hot Dip Galvanised Steel Hot 1.5x50 mm Equal Tee To BS ENO 1461 13/20 13/20-A 100 Dip Galvanised Steel Hot 1.5x50 mm Equal Tee To BS ENO 1461 13/20 13/20-B 150 Dip Galvanised Steel Hot 1.5x50 mm Equal Tee To BS ENO 1461 13/20 13/20-C 225 Dip Galvanised Steel Hot 1.5x50 mm Equal Tee To BS ENO 1461 13/20 13/20-D 300 Dip Galvanised Steel Hot 1.5x50 mm Equal Tee To BS ENO 1461 13/20 13/20-E 450 Dip Galvanised Steel Hot 1.5x50 mm Equal Tee To BS ENO 1461 13/20 13/20-F 600 Dip Galvanised Steel 1.5x50 mm Equal Crossover To BS ENO 1461 14/20 14/20-A 100 Hot Dip Galvanised Steel 1.5x50 mm Equal Crossover To BS ENO 1461 14/20 14/20-B 150 Hot Dip Galvanised SteelBOQ 2012 21
  • 22. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section 1.5x50 mm Equal Crossover To BS ENO 1461 14/20 14/20-C 225 Hot Dip Galvanised Steel 1.5x50 mm Equal Crossover To BS ENO 1461 14/20 14/20-D 300 Hot Dip Galvanised Steel 1.5x50 mm Equal Crossover To BS ENO 1461 14/20 14/20-E 450 Hot Dip Galvanised Steel 1.5x50 mm Equal Crossover To BS ENO 1461 14/20 14/20-F 600 Hot Dip Galvanised Steel Hot Dip 1.5x50 mm Riser To BS ENO 1461 15/20 15/20-A 100 Galvanised Steel Hot Dip 1.5x50 mm Riser To BS ENO 1461 15/20 15/20-B 150 Galvanised Steel Hot Dip 1.5x50 mm Riser To BS ENO 1461 15/20 15/20-C 225 Galvanised Steel Hot Dip 1.5x50 mm Riser To BS ENO 1461 15/20 15/20-D 300 Galvanised Steel Hot Dip 1.5x50 mm Riser To BS ENO 1461 15/20 15/20-E 450 Galvanised Steel Hot Dip 1.5x50 mm Riser To BS ENO 1461 15/20 15/20-F 600 Galvanised Steel Hot Dip 1.5x50 mm Straight Reducer 16/20 16/20-A 100/150 Galvanised Steel Hot Dip 1.5x50 mm Straight Reducer 16/20 16/20-B 100/150 225 Galvanised Steel Hot Dip 1.5x50 mm Straight Reducer 16/20 16/20-C 225/100/150 300 Galvanised Steel Hot Dip 1.5x50 mm Straight Reducer 16/20 16/20-D 300/225/100/150 450 Galvanised Steel Hot Dip 1.5x50 mm Straight Reducer 16/20 16/20-E 450/300/225/100/150 600 Galvanised Steel 1.5x50 mm / Elbow Cover To BS ENO 1461 17/20 17/20-A Fixing Clips 108 Hot Dip Galvanised Steel 1.5x50 mm / Elbow Cover To BS ENO 1461 17/20 17/20-B Fixing Clips 158 Hot Dip Galvanised Steel 1.5x50 mm / Elbow Cover To BS ENO 1461 17/20 17/20-C Fixing Clips 233 Hot Dip Galvanised Steel 1.5x50 mm / Elbow Cover To BS ENO 1461 17/20 17/20-D Fixing Clips 308 Hot Dip Galvanised SteelBOQ 2012 22
  • 23. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section 1.5x50 mm / Elbow Cover To BS ENO 1461 17/20 17/20-E Fixing Clips 458 Hot Dip Galvanised Steel 1.5x50 mm / Elbow Cover To BS ENO 1461 17/20 17/20-F Fixing Clips 608 Hot Dip Galvanised Steel 1.5x50 mm Equal Tee Cover To BS ENO 1461 18/20 18/20-A Fixing Clips 108 Hot Dip Galvanised Steel 1.5x50 mm Equal Tee Cover To BS ENO 1461 18/20 18/20-B Fixing Clips 158 Hot Dip Galvanised Steel 1.5x50 mm Equal Tee Cover To BS ENO 1461 18/20 18/20-C Fixing Clips 233 Hot Dip Galvanised Steel 1.5x50 mm Equal Tee Cover To BS ENO 1461 18/20 18/20-D Fixing Clips 308 Hot Dip Galvanised Steel 1.5x50 mm Equal Tee Cover To BS ENO 1461 18/20 18/20-E Fixing Clips 458 Hot Dip Galvanised Steel 1.5x50 mm Equal Tee Cover To BS ENO 1461 18/20 18/20-F Fixing Clips 608 Hot Dip Galvanised Steel 1.5x50 mm Equal Crossover Cover To BS ENO 1461 19/20 19/20-A Fixing Clips 108 Hot Dip Galvanised Steel 1.5x50 mm Equal Crossover Cover To BS ENO 1461 19/20 19/20-B Fixing Clips 158 Hot Dip Galvanised Steel 1.5x50 mm Equal Crossover Cover To BS ENO 1461 19/20 19/20-C Fixing Clips 233 Hot Dip Galvanised Steel 1.5x50 mm Equal Crossover Cover To BS ENO 1461 19/20 19/20-D Fixing Clips 308 Hot Dip Galvanised Steel 1.5x50 mm Equal Crossover Cover To BS ENO 1461 19/20 19/20-E Fixing Clips 458 Hot Dip Galvanised Steel 1.5x50 mm Equal Crossover Cover To BS ENO 1461 19/20 19/20-F Fixing Clips 608 Hot Dip Galvanised Steel 1.5x50 mm Riser Cover To BS ENO 1461 20/20 20/20-A Fixing Clips 108 Hot Dip Galvanised Steel 1.5x50 mm Riser Cover To BS ENO 1461 20/20 20/20-B Fixing Clips 158 Hot Dip Galvanised Steel 1.5x50 mm Riser Cover To BS ENO 1461 20/20 20/20-C Fixing Clips 233 Hot Dip Galvanised SteelBOQ 2012 23
  • 24. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section 1.5x50 mm Riser Cover To BS ENO 1461 20/20 20/20-D Fixing Clips 308 Hot Dip Galvanised Steel 1.5x50 mm Riser Cover To BS ENO 1461 20/20 20/20-E Fixing Clips 458 Hot Dip Galvanised Steel 1.5x50 mm Riser Cover To BS ENO 1461 20/20 20/20-F Fixing Clips 608 Hot Dip Galvanised Steel Hot Dip 1.5x50 mm Straight Reducer 21/20 21/20-A 158/108 Galvanised Steel Hot Dip 1.5x50 mm Straight Reducer 21/20 21/20-B 158/108 233 Galvanised Steel Hot Dip 1.5x50 mm Straight Reducer 21/20 21/20-C 158/233/108 308 Galvanised Steel Hot Dip 1.5x50 mm Straight Reducer 21/20 21/20-D 308/158/233/108 458 Galvanised Steel Hot Dip 1.5x50 mm Straight Reducer 21/20 21/20-E 458/308/158/233/108 608 Galvanised Steel 6 Class 6 uPVC 22/20 22/20-A 4 Class 6 uPVC 22/20 22/20-B 3.5 Class 6 uPVC 22/20 22/20-C 3 Class 6 uPVC 22/20 22/20-D 50 Heavy Duty uPVC 23/20 23/20-A 38 Heavy Duty uPVC 23/20 23/20-B 25 Heavy Duty uPVC 23/20 23/20-C 20 Heavy Duty uPVC 23/20 23/20-DBOQ 2012 24
  • 25. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section 25 G.I. Boxes, Couplers, Bends, Adaptors, Saddles ...etc 24/20 24/20-A 20 G.I. Boxes, Couplers, Bends, Adaptors, Saddles ...etc 24/20 24/20-B Adaptors, Tees, Corners PVC 25/20 25/20 16 16 Adaptors, Tees, Corners PVC 26/20 26/20 25 16 Adaptors, Tees, Corners PVC 27/20 27/20 38 16 Adaptors, Tees, Corners PVC 28/20 28/20 38 25 Adaptors, Tees, Corners PVC 29/20 29/20 38 38 Adaptors, Tees, Corners PVC 30/20 30/20 50 50 Adaptors, Tees, Corners PVC 31/20 31/20 75 50 Adaptors, Tees, Corners PVC 32/20 32/20 75 75 Adaptors, Tees, Corners PVC 33/20 33/20 .) 50 100 Adaptors, Tees, Corners PVC 34/20 34/20 100 100 Adaptors, Tees, Corners PVC 35/20 35/20 150 100 50 50 Internal Coupler 36/20 36/20-A 75 50 Internal Coupler 36/20 36/20-B 75 75 Internal Coupler 36/20 36/20-C 100 50 Internal Coupler 36/20 36/20-D 100 100 Internal Coupler 36/20 36/20-E 150 100 Internal Coupler 36/20 36/20-F 50 50 End Cap 37/20 37/20-A 75 50 End Cap 37/20 37/20-B 75 75 End Cap 37/20 37/20-C 100 50 End Cap 37/20 37/20-D 100 100 End Cap 37/20 37/20-E 150 100 End Cap 37/20 37/20-FBOQ 2012 25
  • 26. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section Flat/Inside/Outside Angle, Flat/Edge Tee 38/20 38/20-A 50 50 Flat/Inside/Outside Angle, Flat/Edge Tee 38/20 38/20-B 75 50 Flat/Inside/Outside Angle, Flat/Edge Tee 38/20 38/20-C 75 75 Flat/Inside/Outside Angle, Flat/Edge Tee 38/20 38/20-D 100 50 Flat/Inside/Outside Angle, Flat/Edge Tee 38/20 38/20-E 100 100 Flat/Inside/Outside Angle, Flat/Edge Tee 38/20 38/20-F 150 100 50 50 Flat Cross Over 39/20 39/20-A 75 50 Flat Cross Over 39/20 39/20-B 75 75 Flat Cross Over 39/20 39/20-C 100 50 Flat Cross Over 39/20 39/20-D 100 100 Flat Cross Over 39/20 39/20-E 150 100 Flat Cross Over 39/20 39/20-F Adaptors Compartments 3 40/20 40/20 150 50 Tees, Corners, Plug-on switch socket 13 41/20 41/20 150 50 Plug-on telephone socket 42/20 42/20 150 50 Plug-on computer terminal socket 43/20 43/20 150 50 Plug-on DP switch 32 44/20 44/20 150 50 UNDER FLOOR TRUNKING uPVC 1 TRUNK 45/20/ 45/20-A1 1,6 25 50 UNDER FLOOR TRUNKING uPVC 2 TRUNK 45/20/ 45/20-A2 1,6 25 75 UNDER FLOOR TRUNKING uPVC 3 TRUNK 45/20/ 45/20-A3 1,6 25 100 UNDER FLOOR TRUNKING uPVC 4 TRUNK 45/20/ 45/20-A4 1,6 25 100BOQ 2012 26
  • 27. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section UNDER FLOOR TRUNKING uPVC 5 TRUNK 45/20/ 45/20-A5 1,6 25 150 UNDER FLOOR TRUNKING uPVC 6 TRUNK 45/20/ 45/20-A6 1,6 25 150 UNDER FLOOR TRUNKING uPVC 7 TRUNK 45/20/ 45/20-A7 1,6 25 200 UNDER FLOOR TRUNKING uPVC 8 TRUNK 45/20/ 45/20-A8 1,6 25 225 UNDER FLOOR TRUNKING uPVC 9 TRUNK 45/20/ 45/20-A9 1,6 25 250 UNDER FLOOR TRUNKING uPVC 10 45/20- TRUNK 45/20/ A10 1,6 25 275 UNDER FLOOR TRUNKING uPVC 11 45/20- TRUNK 45/20/ A11 1,6 25 300 UNDER FLOOR TRUNKING uPVC 12 45/20- TRUNK 45/20/ A12 1,6 25 375 UNDER FLOOR TRUNKING uPVC 1 TRUNK 45/20/ 45/20-B1 1,6 32 50 UNDER FLOOR TRUNKING uPVC 2 TRUNK 45/20/ 45/20-B2 1,6 32 75 UNDER FLOOR TRUNKING uPVC 3 TRUNK 45/20/ 45/20-B3 1,6 32 100 UNDER FLOOR TRUNKING uPVC 4 TRUNK 45/20/ 45/20-B4 1,6 32 100 UNDER FLOOR TRUNKING uPVC 5 TRUNK 45/20/ 45/20-B5 1,6 32 150BOQ 2012 27
  • 28. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section UNDER FLOOR TRUNKING uPVC 6 TRUNK 45/20/ 45/20-B6 1,6 32 150 UNDER FLOOR TRUNKING uPVC 7 TRUNK 45/20/ 45/20-B7 1,6 32 200 UNDER FLOOR TRUNKING uPVC 8 TRUNK 45/20/ 45/20-B8 1,6 32 225 UNDER FLOOR TRUNKING uPVC 9 TRUNK 45/20/ 45/20-B9 1,6 32 250 UNDER FLOOR TRUNKING uPVC 10 45/20- TRUNK 45/20/ B10 1,6 32 275 UNDER FLOOR TRUNKING uPVC 11 45/20- TRUNK 45/20/ B11 1,6 32 300 UNDER FLOOR TRUNKING uPVC 12 45/20- TRUNK 45/20/ B12 1,6 32 375 UNDER FLOOR TRUNKING uPVC 1 TRUNK 45/20/ 45/20-C1 1,6 38 50 UNDER FLOOR TRUNKING uPVC 2 TRUNK 45/20/ 45/20-C2 1,6 38 75 UNDER FLOOR TRUNKING uPVC 3 TRUNK 45/20/ 45/20-C3 1,6 38 100 UNDER FLOOR TRUNKING uPVC 4 TRUNK 45/20/ 45/20-C4 1,6 38 100 UNDER FLOOR TRUNKING uPVC 5 TRUNK 45/20/ 45/20-C5 1,6 38 150 UNDER FLOOR TRUNKING uPVC 6 TRUNK 45/20/ 45/20-C6 1,6 38 150BOQ 2012 28
  • 29. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section UNDER FLOOR TRUNKING uPVC 7 TRUNK 45/20/ 45/20-C7 1,6 38 200 UNDER FLOOR TRUNKING uPVC 8 TRUNK 45/20/ 45/20-C8 1,6 38 225 UNDER FLOOR TRUNKING uPVC 9 TRUNK 45/20/ 45/20-C9 1,6 38 250 UNDER FLOOR TRUNKING uPVC 10 45/20- TRUNK 45/20/ C10 1,6 38 275 UNDER FLOOR TRUNKING uPVC 11 45/20- TRUNK 45/20/ C11 1,6 38 300 UNDER FLOOR TRUNKING uPVC 12 45/20- TRUNK 45/20/ C12 1,6 25 375 UNDER FLOOR PREGALVANISED 1 DUCT TRUNKING 46/20/ 46/20-A1 1,6 25 50 UNDER FLOOR PREGALVANISED 2 DUCT TRUNKING 46/20/ 46/20-A2 1,6 25 75 UNDER FLOOR PREGALVANISED 3 DUCT TRUNKING 46/20/ 46/20-A3 1,6 25 100 UNDER FLOOR PREGALVANISED 4 DUCT TRUNKING 46/20/ 46/20-A4 1,6 25 100 UNDER FLOOR PREGALVANISED 5 DUCT TRUNKING 46/20/ 46/20-A5 1,6 25 150 UNDER FLOOR PREGALVANISED 6 DUCT TRUNKING 46/20/ 46/20-A6 1,6 25 150 UNDER FLOOR PREGALVANISED 7 DUCT TRUNKING 46/20/ 46/20-A7 1,6 25 200BOQ 2012 29
  • 30. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section UNDER FLOOR PREGALVANISED 8 DUCT TRUNKING 46/20/ 46/20-A8 1,6 25 225 UNDER FLOOR PREGALVANISED 9 DUCT TRUNKING 46/20/ 46/20-A9 1,6 25 250 UNDER FLOOR PREGALVANISED 10 46/20- DUCT TRUNKING 46/20/ A10 1,6 25 275 UNDER FLOOR PREGALVANISED 11 46/20- DUCT TRUNKING 46/20/ A11 1,6 25 300 UNDER FLOOR PREGALVANISED 12 46/20- DUCT TRUNKING 46/20/ A12 1,6 25 375 UNDER FLOOR PREGALVANISED 1 DUCT TRUNKING 46/20/ 46/20-B1 1,6 32 50 UNDER FLOOR PREGALVANISED 2 DUCT TRUNKING 46/20/ 46/20-B2 1,6 32 75 UNDER FLOOR PREGALVANISED 3 DUCT TRUNKING 46/20/ 46/20-B3 1,6 32 100 UNDER FLOOR PREGALVANISED 4 DUCT TRUNKING 46/20/ 46/20-B4 1,6 32 100 UNDER FLOOR PREGALVANISED 5 DUCT TRUNKING 46/20/ 46/20-B5 1,6 32 150 UNDER FLOOR PREGALVANISED 6 DUCT TRUNKING 46/20/ 46/20-B6 1,6 32 150 UNDER FLOOR PREGALVANISED 7 DUCT TRUNKING 46/20/ 46/20-B7 1,6 32 200 UNDER FLOOR PREGALVANISED 8 DUCT TRUNKING 46/20/ 46/20-B8 1,6 32 225BOQ 2012 30
  • 31. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section UNDER FLOOR PREGALVANISED 9 DUCT TRUNKING 46/20/ 46/20-B9 1,6 32 250 UNDER FLOOR PREGALVANISED 10 46/20- DUCT TRUNKING 46/20/ B10 1,6 32 275 UNDER FLOOR PREGALVANISED 11 46/20- DUCT TRUNKING 46/20/ B11 1,6 32 300 UNDER FLOOR PREGALVANISED 12 46/20- DUCT TRUNKING 46/20/ B12 1,6 32 375 UNDER FLOOR PREGALVANISED 1 DUCT TRUNKING 46/20/ 46/20-C1 1,6 38 50 UNDER FLOOR PREGALVANISED 2 DUCT TRUNKING 46/20/ 46/20-C2 1,6 38 75 UNDER FLOOR PREGALVANISED 3 DUCT TRUNKING 46/20/ 46/20-C3 1,6 38 100 UNDER FLOOR PREGALVANISED 4 DUCT TRUNKING 46/20/ 46/20-C4 1,6 38 100 UNDER FLOOR PREGALVANISED 5 DUCT TRUNKING 46/20/ 46/20-C5 1,6 38 150 UNDER FLOOR PREGALVANISED 6 DUCT TRUNKING 46/20/ 46/20-C6 1,6 38 150 UNDER FLOOR PREGALVANISED 7 DUCT TRUNKING 46/20/ 46/20-C7 1,6 38 200 UNDER FLOOR PREGALVANISED 8 DUCT TRUNKING 46/20/ 46/20-C8 1,6 38 225 UNDER FLOOR PREGALVANISED 9 DUCT TRUNKING 46/20/ 46/20-C9 1,6 38 250BOQ 2012 31
  • 32. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section UNDER FLOOR PREGALVANISED 10 46/20- DUCT TRUNKING 46/20/ C10 1,6 38 275 UNDER FLOOR PREGALVANISED 11 46/20- DUCT TRUNKING 46/20/ C11 1,6 38 300 UNDER FLOOR PREGALVANISED 12 46/20- DUCT TRUNKING 46/20/ C12 1,6 38 375 SERVICE BOX 47/20 47/20 125 25 SERVICE BOX 1 47/20/ 47/20-A1 70 53 125 250 25 SERVICE BOX 2 47/20/ 47/20-A2 70 53 125 250 25 SERVICE BOX 3 47/20/ 47/20-A3 70 53 125 250 25 SERVICE BOX 4 47/20/ 47/20-A4 70 53 250 250 25 SERVICE BOX 5 47/20/ 47/20-A5 70 53 250 300 25 SERVICE BOX 6 47/20/ 47/20-A6 70 53 300 300 25 SERVICE BOX 7 47/20/ 47/20-A7 70 53 300 375 25 SERVICE BOX 8 47/20/ 47/20-A8 70 53 250 125 32 SERVICE BOX 1 47/20/ 47/20-B1 90 75 125 250 32 SERVICE BOX 2 47/20/ 47/20-B2 90 75 125 250 32 SERVICE BOX 3 47/20/ 47/20-B3 90 75 250 250 32 SERVICE BOX 4 47/20/ 47/20-B4 90 75 250 300 300 32 SERVICE BOX 5 47/20/ 47/20-B5 90 75 375 32 SERVICE BOX 6 47/20/ 47/20-B6 90 75 250 125 125 38 SERVICE BOX 1 47/20/ 47/20-C1 75-90BOQ 2012 32
  • 33. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section 125 250 38 SERVICE BOX 2 47/20/ 47/20-C2 90 75 125 250 38 SERVICE BOX 3 47/20/ 47/20-C3 90 75 250 250 38 SERVICE BOX 4 47/20/ 47/20-C4 90 75 300 300 38 SERVICE BOX 6 47/20/ 47/20-C6 90 75 300 38 SERVICE BOX 7 47/20/ 47/20-C7 90 75 300 375 38 SERVICE BOX 8 47/20/ 47/20-C8 90 75 250 VERTICAL ACCESS BOX 48/20 48/20 50 200 125 25 1 48/20/ 48/20-A1 50 200 250 25 2 48/20/ 48/20-A2 50 200 250 25 3 48/20/ 48/20-A3 50 200 300 25 4 48/20/ 48/20-A4 50 200 300 25 5 48/20/ 48/20-A5 50 200 375 25 6 48/20/ 48/20-A6 50 200 400 25 7 48/20/ 48/20-A7 50 250 125 32 1 48/20/ 48/20-B1 50 250 250 32 2 48/20/ 48/20-B2 50 250 250 32 3 48/20/ 48/20-B3 50 250 300 32 4 48/20/ 48/20-B4 50 250 300 32 5 48/20/ 48/20-B5 50 250 375 32 6 48/20/ 48/20-B6 50 250 400 32 7 48/20/ 48/20-B7 50 250 125 38 1 48/20/ 48/20-C1 50 250 250 38 2 48/20/ 48/20-C2 50 250 250 38 3 48/20/ 48/20-C3 50 250 300 38 4 48/20/ 48/20-C4 50 250 300 38 5 48/20/ 48/20-C5 50 250 375 38 6 48/20/ 48/20-C6 50 250 400 38 7 48/20/ 48/20-C7 1/21 1/21 2/21 2/21 Looping 3/21 3/21 4/21 4/21BOQ 2012 33
  • 34. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section 5/21 5/21 5 6/21 6/21 15/20 5 7/21 7/21 Ceiling Rose 8/21 8/21 One way 10 9/21 9/21 Two Way 10 10/21 10/21 One way 10 11/21 11/21 Two Way 10 12/21 12/21 Intermediate 10 13/21 13/21 3Gang, Two Way 10 14/21 14/21 4Gang, Two Way 10 15/21 15/21 IP65 One way 10 16/21 16/21 Two way 10 IP65 17/21 17/21 IP65 Two way 10 18/21 18/21 IP65 Two way 10 19/21 19/21 Two Way 10 20/21 20/21 Two Way 10 21/21 21/21 Three Way 10 22/21 22/21 15/20 23/21 23/21 Flex Outlet, ..Etc 15/20 24/21 24/21 Flex Outlet, ..Etc 15/20 25/21 25/21 Flex Outlet, ..Etc 15/20 26/21 26/21 Flex Outlet, ..Etc 15/20 27/21 27/21 Flex Outlet, ..Etc 15/20 28/21 28/21 Flex Outlet, ..Etc IP65 One Way 20 29/21 29/21BOQ 2012 34
  • 35. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section IP65 Two Way 20 30/21 30/21 IP65 Intermediate 20 31/21 31/21 32 32/21 32/21 Flex Outlet, ..Etc 15/20 Flex Outlet, ..Etc 33/21 33/21 32 Cooker Control Unit 13 45 34/21 34/21 Cooker Control Unit 13 45 35/21 35/21 Cooker Control Unit 13 45 36/21 36/21 Cooker Control Unit 13 45 37/21 37/21 15/20 38/21 38/21-A Flex Outlet, ..Etc 15/20 Flex Outlet, ..Etc 38/21 38/21-B Flex Outlet or 2 1 Grid Switches 39/21 39/21-A Mounting & Front-plate Module or 4 3 Grid Switches 39/21 39/21-B Mounting & Front-plate Module or 8 6 Grid Switches 39/21 39/21-C Mounting & Front-plate Module Module 12 Grid Switches 39/21 39/21-D Mounting & Front-plate or 2 1 Grid Switches 39/21 39/21-E Front-plate Mounting & Front-plate Module or 2 1 Grid Switches Front or 4 Module 3 Mounting & Front-plate Module 39/21 39/21-F plate or 2 1 Grid Switches Front or 8 Module 6 Mounting & Front-plate Module 39/21 39/21-G plate or 2 1 Grid Switches Front Module 12 Mounting & Front-plate Module 39/21 39/21-H plateBOQ 2012 35
  • 36. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section One Module One-Way 10 40/21 40/21-A One Module One-Way 10 40/21 40/21-B One Module Two-Way 10 40/21 40/21-C One Module Two-Way 10 40/21 40/21-D One Module One-Way 20 40/21 40/21-E One Module One-Way 20 40/21 40/21-F Two Module One-Way 10 40/21 40/21-G Two Module One-Way 10 40/21 40/21-H One Module One-Way Intermediate 10 40/21 40/21-I One Module One-Way Intermediate 10 40/21 40/21-J 13 41/21 41/21 13A, 1Gang DP switch socket with dual earth terminals to BS1363 Pt.2: 1995 3pin .resistant shutter system 13 15 42/21 42/21 13A, 1Gang DP switch socket with dual earth terminals to BS1363 Pt.2: 1995 15 15A, 1Gang DP switch socket with dual earth terminals to BS1363 Pt.2: 1995 43/21 43/21 3pin resistant shutter system 15 15A, 1Gang DP switch socket with dual earth terminals to BS1363 Pt.2: 1995 44/21 44/21 3pin resistant shutter system 15 13 13A, 1Gang DP switch socket with dual earth terminals to BS1363 Pt.2: 1995 45/21 45/21 3pin resistant shutter system 13 13A, 1Gang DP switch socket with dual earth terminals to BS1363 Pt.2: 1995 46/21 46/21 3pin resistant shutter system 13 13A, 1Gang DP switch socket with dual earth terminals to BS1363 Pt.2: 1995 47/21 47/21 3pin resistant shutter system 15 13 48/21 48/21 13A, 1Gang DP switch socket with dual earth terminals to BS1363 Pt.2: 1995BOQ 2012 36
  • 37. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section 13 13A, 1Gang DP switch socket with dual earth terminals to BS1363 Pt.2: 1995 49/21 49/21-A 3pin resistant shutter system 13 49/21 49/21-B 13A, 1Gang DP switch socket with dual earth terminals to BS1363 Pt.2: 1995 13 13A, 3Gang DP switch socket with dual earth terminals to BS1363 Pt.2: 1995 50/21 50/21-A 3pin resistant shutter system 13 13A, 3Gang DP switch socket with dual earth terminals to BS1363 Pt.2: 1995 50/21 50/21-B 3pin resistant shutter system 13 13A, 2Gang DP switch socket with dual earth terminals to BS1363 Pt.2: 1995 51/21 51/21 3pin resistant shutter system 13 13A, 2Gang DP switch socket with dual earth terminals to BS1363 Pt.2: 1995 52/21 52/21 3pin resistant shutter system IP56 13 53/21 53/21 15 IP56 13 54/21 54/21 15 IP56 13 55/21 55/21 15 IP56 13 56/21 56/21 15 13/32 57/21 57/21 5 13/32 58/21 58/21 RCD 13 59/21 59/21 30 RCD 13 30 60/21 60/21 RCD 13 61/21 61/21 IP56 30 RCD 13 62/21 62/21 IP56 30BOQ 2012 37
  • 38. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section RCD 13 63/21 63/21 IP56 30 13 IP56 RCD 64/21 64/21 30 RCD 3 16/32 30 30 65/21 65/21 IP65 RCD 3 16/32 30 30 66/21 66/21 IP65 3P+N+E 3 16/32 67/21 67/21 IP65 Male & Female 3P+N+E 3 63 68/21 68/21 IP65 Male & Female 2P+E 1 32 69/21 69/21 IP65 Male & Female 2P+E 1 63 70/21 70/21 IP65 Male & Female Pairs as a minimum 2 71/21 71/21 72/21 72/21 Pairs as a minimum 2 73/21 73/21 74/21 74/21 Draw Wires 75/21 75/21 Draw Wires 76/21 76/21 Draw Wires 77/21 77/21 Draw Wires 78/21 78/21 400/600 Dimmer Switch 79/21 79/21 400/600 Dimmer Switch 80/21 80/21 1000/800 81/21 81/21 Dimmer Switch One Way Gang 82/21 82/21 400/600BOQ 2012 38
  • 39. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section 500 Two Way Dimmer Switch 83/21 83/21 500 Two Way Dimmer Switch 84/21 84/21 GLS 1 500 Dimmer 85/21 85/21-A 500 60 1 420 Dimmer 85/21 85/21-B 320 60 1000/800 100 1 1000 Dimmer 85/21 85/21-C GLS Extra Low Voltage Halogen with Ferromagnetic Tr. With Compensator 1000/800 100 1 1000 Dimmer Functions 3 GLS 85/21 85/21-D Extra Low Voltage Halogen with Ferromagnetic Tr. With Compensator Hint: Up to 4 slaves can be used per master remote dimmer 800 3 1 100 Functions Dimmer 3 Extra Low Voltage Halogen with Ferromagnetic Tr ELV 85/21 85/21-E with Compensator Hint: Up to 4 slaves can be used per master remote dimmer 800VA Dimmer T5/T8 86/21 86/21-A Hint: Controls fluorescent loads up to 6000VA by using combination of products 1500VA/1 or 3 phase, 3functions remote dimmer T5/T8 86/21 86/21-B Hint: Controls fluorescent loads up to 6000VA by using combination of products Hint: Up to 4 slaves can be used per master remote dimmer 800VA Per Zone, 2 Zones Remote Dimmer T5/T8 86/21 86/21-C Hint: Controls fluorescent loads up to 6000VA by using combination of productsBOQ 2012 39
  • 40. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section 3 1 2500 Remote Control Power Dimmer 2500 300 GLS 87/21 87/21 12V ELV Halogen with Ferromagnetic Tr Hint: Up to 4 slaves can be used per master remote dimmer 3 1 2500 Remote Control Power Dimmer 5000 300 GLS 88/21 88/21 12V ELV Halogen with Ferromagnetic Tr Hint: Up to 4 slaves can be used per master remote dimmer remote dimmers position double push button 2 89/21 89/21 remote dimmers position double push button 2 90/21 90/21 Rotary Control Potentiometer 0-100% remote dimmers position double push button 2 91/21 91/21 Pre-set Levels, 33%, 66% & 100% 3 12/24V 92/21 92/21 12/24V 93/21 93/21 6 94/21 94/21 8 95/21 95/21 with indicator 6 12/24V 96/21 96/21 6 lamps with indicator 6 12/24V 97/21 97/21 6 lamps with indicator 12 12/24V 98/21 98/21 12 lamps with indicator 12 12/24V 99/21 99/21 12 lamps 100/21 100/21 101/21 101/21 102/21 102/21 103/21 103/21-A 50 6 Digital 103/21 103/21-B 50 10 DigitalBOQ 2012 40
  • 41. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section 103/21 103/21-C 50 10 Digital Flush G. I. Box For 1Gang 104/21 104/21 Brass Earth Terminal + 2 Adjustable Lugs Flush G. I. Box For 2Gang 105/21 105/21 Brass Earth Terminal + 2 Adjustable Lugs Flush G. I. Box For 3Gang 106/21 106/21 Brass Earth Terminal + 2 Adjustable Lugs Surface PVC Box For 1Gang 107/21 107/21 Surface PVC Box For 2Gang 108/21 108/21 Surface PVC Box For 3Gang 109/21 109/21 Brass Earth GI/Metal Clad For 1Gang 110/21 110/21 Terminal Brass Earth GI/Metal Clad For 2Gang 111/21 111/21 Terminal cooker connection unit 112/21 112/21 flex outlet plate 113/21 113/21 48/56 114/21 114/21-A 114/21 114/21-B Cord Operated Shutters 6 115/21 115/21-A CFM 120 Manual Cord Operated Shutters 9 8 115/21 115/21-B CFM 220 Manual Fully Auto operated 6 116/21 116/21-A CFM 160 Shutter Fully Auto operated Shutter 9 8 116/21 116/21-B CFM 400 high pressure 3 600 10 shutter (gravity outer industrial 117/21 117/21-A high pressure 1 3 900 12 gravity outer shutter industrial 117/21 117/21-B 50 118/21 118/21BOQ 2012 41
  • 42. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section 50 119/21 119/21 80 120/21 120/21 80 121/21 121/21 100 122/21 122/21 100 123/21 123/21 124/21 124/21 125/21 125/21 1X18W Recessed Fluorescent Housing: White painted sheet steel Optics: longitudinal and transversal louver in High-gloss anti-reflection and anti-iridescence, low luminance aluminum 1/22 1/22 Electric Gear: 240V/50Hz power supply. Hard wire, 0.5 mm2 cross sectionresistant to . 2P+E terminal block, with max. Allowed lead cross section of 2.5 mm2 Ingress Protect.: IP20 as a minimum Approval mark: ENEC 1X36W Recessed Fluorescent Housing: White painted sheet steel Optics: longitudinal and transversal louver in High-gloss anti-reflection and anti-iridescence, low luminance aluminum 2/22 2/22 Electric Gear: 240V/50Hz power supply. Hard wire, 0.5 mm2 cross sectionresistant to . 2P+E terminal block, with max. Allowed lead cross section of 2.5 mm2 Ingress Protect.: IP20 as a minimum Approval mark: ENECBOQ 2012 42
  • 43. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section 1X58W Recessed Fluorescent Housing: White painted sheet steel Optics: longitudinal and transversal louver in High-gloss anti-reflection and anti-iridescence, low luminance aluminum 3/22 3/22 Electric Gear: 240V/50Hz power supply. Hard wire, 0.5 mm2 cross sectionresistant to . 2P+E terminal block, with max. Allowed lead cross section of 2.5 mm2 Ingress Protect.: IP20 as a minimum Approval mark: ENEC 2X18W Recessed Fluorescent Housing: White painted sheet steel Optics: longitudinal and transversal louver in High-gloss anti-reflection and anti-iridescence, low luminance aluminum 4/22 4/22 Electric Gear: 240V/50Hz power supply. Hard wire, 0.5 mm2 cross sectionresistant to . 2P+E terminal block, with max. Allowed lead cross section of 2.5 mm2 With 2 Ballasts and Starters Ingress Protect.: IP20 as a minimum Approval mark: ENEC 2X36W Recessed Fluorescent Housing: White painted sheet steel Optics: longitudinal and transversal louver in High-gloss anti-reflection and anti-iridescence, low luminance aluminum 5/22 5/22 Electric Gear: 240V/50Hz power supply. Hard wire, 0.5 mm2 cross sectionresistant to . 2P+E terminal block, with max. Allowed lead cross section of 2.5 mm2 With 2 Ballasts and Starters Ingress Protect.: IP20 as a minimum Approval mark: ENECBOQ 2012 43
  • 44. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section 2X58W Recessed Fluorescent Housing: White painted sheet steel Optics: longitudinal and transversal louver in High-gloss anti-reflection and anti-iridescence, low luminance aluminum 6/22 6/22 Electric Gear: 240V/50Hz power supply. Hard wire, 0.5 mm2 cross sectionresistant to . 2P+E terminal block, with max. Allowed lead cross section of 2.5 mm2 With 2 Ballasts and Starters Ingress Protect.: IP20 as a minimum Approval mark: ENEC 4X18W Recessed Fluorescent Housing: White painted sheet steel Optics: longitudinal and transversal louver in High-gloss anti-reflection and anti-iridescence, low luminance aluminum 7/22 7/22 Electric Gear: 240V/50Hz power supply. Hard wire, 0.5 mm2 cross sectionresistant to . 2P+E terminal block, with max. Allowed lead cross section of 2.5 mm2 With 4 Ballasts and Starters Ingress Protect.: IP20 as a minimum Approval mark: ENEC 4X36W Recessed Fluorescent Housing: White painted sheet steel Optics: longitudinal and transversal louver in High-gloss anti-reflection and anti-iridescence, low luminance aluminum 8/22 8/22 Electric Gear: 240V/50Hz power supply. Hard wire, 0.5 mm2 cross sectionresistant to . 2P+E terminal block, with max. Allowed lead cross section of 2.5 mm2 With 4 Ballasts and Starters Ingress Protect.: IP20 as a minimum Approval mark: ENECBOQ 2012 44
  • 45. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section 1X18W Recessed Fluorescent Housing: sheet steel Optics: Dual parabolic dark light louver in High-gloss anti-reflection and anti-iridescence, very low luminance aluminum Matt anodized 2 , low luminance aluminu Painting: White acrylic anionic electro coating, UV-stabilized, upon phosphate 9/22 9/22 treatment Lamp Holder: Polycarbonate, with contacts in phosphor bronze Electric Gear:240V/50Hz power supply. Hard wire, 0.5 mm2 cross section resistantto . 2P+E terminal block, with max. Allowed lead cross section of mm2 2.5 Ingress Protect.: IP20 as a minimum 1X36W Recessed Fluorescent Housing: sheet steel Optics: Dual parabolic dark light louver in High-gloss anti-reflection and anti-iridescence, very low luminance aluminum Matt anodized 2 , low luminance aluminu Painting: White acrylic anionic electro coating, UV-stabilized, upon phosphate 10/22 10/22 treatment Lamp Holder: Polycarbonate, with contacts in phosphor bronze Electric Gear:240V/50Hz power supply. Hard wire, 0.5 mm2 cross section resistantto . 2P+E terminal block,with max. Allowed lead cross section of 2.5 mm2 Ingress Protect.: IP20 as a minimum 1X58W Recessed Fluorescent Housing: sheet steel Optics: Dual parabolic dark light louver in High-gloss anti-reflection and anti-iridescence, very low luminance aluminum Matt anodized 2 , low luminance aluminu Painting: White acrylic anionic electro coating, UV-stabilized, upon phosphate 11/22 11/22 treatment Lamp Holder: Polycarbonate, with contacts in phosphor bronze Electric Gear:240V/50Hz power supply. Hard wire, 0.5 mm2 cross section resistantto . 2P+E terminal block, with max. Allowed lead cross section of mm2 2.5 Ingress Protect.: IP20 as a minimumBOQ 2012 45
  • 46. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section 2X18W Recessed Fluorescent Housing: sheet steel Optics: Dual parabolic dark light louver in High-gloss anti-reflection and anti-iridescence, very low luminance aluminum Matt anodized 2 , low luminance aluminu Painting: White acrylic anionic electro coating, UV-stabilized, upon phosphate 12/22 12/22 treatment Lamp Holder: Polycarbonate, with contacts in phosphor bronze Electric Gear:240V/50Hz power supply. Hard wire, 0.5 mm2 cross section resistantto . 2P+E terminal block,With 2 Ballasts & with max. Allowed lead cross section of 2.5 mm2 Ingress Protect.: IP20 as a minimum 2X36W Recessed Fluorescent Housing: sheet steel Optics: Dual parabolic dark light louver in High-gloss anti-reflection and anti-iridescence, very low luminance aluminum Matt anodized 2 , low luminance aluminu Painting: White acrylic anionic electro coating, UV-stabilized, upon phosphate 13/22 13/22 treatment Lamp Holder: Polycarbonate, with contacts in phosphor bronze Electric Gear:240V/50Hz power supply. Hard wire, 0.5 mm2 cross section resistantto . 2P+E terminal block, with max. Allowed lead cross section of mm2 2.5 Ingress Protect.: IP20 as a minimum 2X58W Recessed Fluorescent Housing: sheet steel Optics: Dual parabolic dark light louver in High-gloss anti-reflection and anti-iridescence, very low luminance aluminum Matt anodized 2 , low luminance aluminu Painting: White acrylic anionic electro coating, UV-stabilized, upon phosphate 14/22 14/22 treatment Lamp Holder: Polycarbonate, with contacts in phosphor bronze Electric Gear:240V/50Hz power supply. Hard wire, 0.5 mm2 cross section resistantto . 2P+E terminal block, with max. Allowed lead cross section of mm2 2.5 Ingress Protect.: IP20 as a minimumBOQ 2012 46
  • 47. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section 4X18W Recessed Fluorescent Housing: sheet steel Optics: Dual parabolic dark light louver in High-gloss anti-reflection and anti-iridescence, very low luminance aluminum Matt anodized 2 , low luminance aluminu Painting: White acrylic anionic electro coating, UV-stabilized, upon phosphate 15/22 15/22 treatment Lamp Holder: Polycarbonate, with contacts in phosphor bronze Electric Gear:240V/50Hz power supply. Hard wire, 0.5 mm2 cross section resistantto . 2P+E terminal block,With 4 Ballasts & Starter, with max. Allowed lead cross section of 2.5 mm2 Ingress Protect.: IP20 as a minimum 4X36W Recessed Fluorescent Housing: sheet steel Optics: Dual parabolic dark light louver in High-gloss anti-reflection and anti-iridescence, very low luminance aluminum Matt anodized 2 , low luminance aluminu Painting: White acrylic anionic electro coating, UV-stabilized, upon phosphate 16/22 16/22 treatment Lamp Holder: Polycarbonate, with contacts in phosphor bronze Electric Gear:240V/50Hz power supply. Hard wire, 0.5 mm2 cross section resistantto . 2P+E terminal block,With 4 Ballasts & Starter, with max. Allowed lead cross section of 2.5 mm2 Ingress Protect.: IP20 as a minimum 1X36W Recessed Fluorescent Housing: sheet steel Optics: Dual parabolic dark light louver in High-gloss anti-reflection and anti-iridescence, very low luminance aluminum Matt anodized 2 , low luminance aluminu Painting: White acrylic anionic electro coating, UV-stabilized, upon phosphate 17/22 17/22 treatment Lamp Holder: Polycarbonate, with contacts in phosphor bronze Electric Gear:With Electroniv Ballasts 240V/50Hz power supply. Hard wire, 0.5 mm2 cross section resistantto . 2P+E terminal block, with max. Allowed lead cross section of mm2 2.5BOQ 2012 47
  • 48. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section 1X58W Recessed Fluorescent Housing: sheet steel Optics: Dual parabolic dark light louver in High-gloss anti-reflection and anti-iridescence, very low luminance aluminum Matt anodized 2 , low luminance aluminu Painting: White acrylic anionic electro coating, UV-stabilized, upon phosphate 18/22 18/22 treatment Lamp Holder: Polycarbonate, with contacts in phosphor bronze Electric Gear:With Electroniv Ballasts 240V/50Hz power supply. Hard wire, 0.5 mm2 cross section resistantto . 2P+E terminal block, with max. Allowed lead cross section of mm2 2.5 2X18W Recessed Fluorescent Housing: sheet steel Optics: Dual parabolic dark light louver in High-gloss anti-reflection and anti-iridescence, very low luminance aluminum Matt anodized 2 , low luminance aluminu Painting: White acrylic anionic electro coating, UV-stabilized, upon phosphate 19/22 19/22 treatment Lamp Holder: Polycarbonate, with contacts in phosphor bronze Electric Gear:With Electroniv Ballasts 240V/50Hz power supply. Hard wire, 0.5 mm2 cross section resistantto . 2P+E terminal block, with max. Allowed lead cross section of mm2 2.5 2X36W Recessed Fluorescent Housing: sheet steel Optics: Dual parabolic dark light louver in High-gloss anti-reflection and anti-iridescence, very low luminance aluminum Matt anodized 2 , low luminance aluminu Painting: White acrylic anionic electro coating, UV-stabilized, upon phosphate 20/22 20/22 treatment Lamp Holder: Polycarbonate, with contacts in phosphor bronze Electric Gear:With Electroniv Ballasts 240V/50Hz power supply. Hard wire, 0.5 mm2 cross section resistantto . 2P+E terminal block, with max. Allowed lead cross section of mm2 2.5BOQ 2012 48
  • 49. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section 2X58W Recessed Fluorescent Housing: sheet steel Optics: Dual parabolic dark light louver in High-gloss anti-reflection and anti-iridescence, very low luminance aluminum Matt anodized 2 , low luminance aluminu Painting: White acrylic anionic electro coating, UV-stabilized, upon phosphate 21/22 21/22 treatment Lamp Holder: Polycarbonate, with contacts in phosphor bronze Electric Gear:With Electroniv Ballasts 240V/50Hz power supply. Hard wire, 0.5 mm2 cross section resistantto . 2P+E terminal block, with max. Allowed lead cross section of mm2 2.5 4X18W Recessed Fluorescent Housing: sheet steel Optics: Dual parabolic dark light louver in High-gloss anti-reflection and anti-iridescence, very low luminance aluminum Matt anodized 2 , low luminance aluminu Painting: White acrylic anionic electro coating, UV-stabilized, upon phosphate 22/22 22/22 treatment Lamp Holder: Polycarbonate, with contacts in phosphor bronze Electric Gear:With Electroniv Ballasts 240V/50Hz power supply. Hard wire, 0.5 mm2 cross section resistantto . 2P+E terminal block, with max. Allowed lead cross section of mm2 2.5 4X36W Recessed Fluorescent Housing: sheet steel Optics: Dual parabolic dark light louver in High-gloss anti-reflection and anti-iridescence, very low luminance aluminum Matt anodized 2 , low luminance aluminu Painting: White acrylic anionic electro coating, UV-stabilized, upon phosphate 23/22 23/22 treatment Lamp Holder: Polycarbonate, with contacts in phosphor bronze Electric Gear:With Electroniv Ballasts 240V/50Hz power supply. Hard wire, 0.5 mm2 cross section resistantto . 2P+E terminal block, with max. Allowed lead cross section of mm2 2.5BOQ 2012 49
  • 50. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section 1X18W Recessed Fluorescent Housing: Sheet steel Diffuser: Polycarbonate or plexiglass Painting: White acrylic anionic electro coating, UV-stabilized, upon phosphated 24/22 24/22 treatment Lamp Holder: Polycarbonate, with contacts in phosphor bronze Electric Gear: 240V/50Hz power supply. Hard wire, 0.5 mm2 cross section resistant to . 2P+E terminal block, with max. Allowed lead cross section of 2.5 mm2 Ingress Protect: IP40 as a minimum Regulation: EN60598-EN60529 1X36W Recessed Fluorescent Housing: Sheet steel Diffuser: Polycarbonate or plexiglass Painting: White acrylic anionic electro coating, UV-stabilized, upon phosphated 25/22 25/22 treatment Lamp Holder: Polycarbonate, with contacts in phosphor bronze Electric Gear: 240V/50Hz power supply. Hard wire, 0.5 mm2 cross section resistant to . 2P+E terminal block, with max. Allowed lead cross section of 2.5 mm2 Ingress Protect: IP40 as a minimum Regulation: EN60598-EN60529 1X58W Recessed Fluorescent Housing: Sheet steel Diffuser: Polycarbonate or plexiglass Painting: White acrylic anionic electro coating, UV-stabilized, upon phosphated 26/22 26/22 treatment Lamp Holder: Polycarbonate, with contacts in phosphor bronze Electric Gear: 240V/50Hz power supply. Hard wire, 0.5 mm2 cross section resistant to . 2P+E terminal block, with max. Allowed lead cross section of 2.5 mm2 Ingress Protect: IP40 as a minimum Regulation: EN60598-EN60529BOQ 2012 50
  • 51. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section 2X18W Recessed Fluorescent Housing: Sheet steel Diffuser: Polycarbonate or plexiglass Painting: White acrylic anionic electro coating, UV-stabilized, upon phosphated 27/22 27/22 treatment Lamp Holder: Polycarbonate, with contacts in phosphor bronze Electric Gear:With 2 Electroniv Ballasts & Starter, 240V/50Hz power supply. Hard wire, 0.5 mm2 cross section, resistant to . 2P+E terminal block, with max Allowed lead cross section of 2.5 mm2 Ingress Protect: IP40 as a minimum Regulation: EN60598-EN60529 2X36W Recessed Fluorescent Housing: Sheet steel Diffuser: Polycarbonate or plexiglass Painting: White acrylic anionic electro coating, UV-stabilized, upon phosphated 28/22 28/22 treatment Lamp Holder: Polycarbonate, with contacts in phosphor bronze Electric Gear:With 2 Electroniv Ballasts & Starter, 240V/50Hz power supply. Hard wire, 0.5 mm2 cross section, resistant to . 2P+E terminal block, with max Allowed lead cross section of 2.5 mm2 Ingress Protect: IP40 as a minimum Regulation: EN60598-EN60529 2X58W Recessed Fluorescent Housing: Sheet steel Diffuser: Polycarbonate or plexiglass Painting: White acrylic anionic electro coating, UV-stabilized, upon phosphated 29/22 29/22 treatment Lamp Holder: Polycarbonate, with contacts in phosphor bronze Electric Gear:With 2 Electroniv Ballasts & Starter, 240V/50Hz power supply. Hard wire, 0.5 mm2 cross section, resistant to . 2P+E terminal block, with max Allowed lead cross section of 2.5 mm2 Ingress Protect: IP40 as a minimum Regulation: EN60598-EN60529BOQ 2012 51
  • 52. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section 4X18W Recessed Fluorescent Housing: Sheet steel Diffuser: Polycarbonate or plexiglass Painting: White acrylic anionic electro coating, UV-stabilized, upon phosphated 30/22 30/22 treatment Lamp Holder: Polycarbonate, with contacts in phosphor bronze Electric Gear:With 4 Electroniv Ballasts & Starter, 240V/50Hz power supply. Hard wire, 0.5 mm2 cross section, resistant to . 2P+E terminal block, with max Allowed lead cross section of 2.5 mm2 Ingress Protect: IP40 as a minimum Regulation: EN60598-EN60529 4X36W Recessed Fluorescent Housing: Sheet steel Diffuser: Polycarbonate or plexiglass Painting: White acrylic anionic electro coating, UV-stabilized, upon phosphated 31/22 31/22 treatment Lamp Holder: Polycarbonate, with contacts in phosphor bronze Electric Gear:With 4 Electroniv Ballasts & Starter, 240V/50Hz power supply. Hard wire, 0.5 mm2 cross section, resistant to . 2P+E terminal block, with max Allowed lead cross section of 2.5 mm2 Ingress Protect: IP40 as a minimum Regulation: EN60598-EN60529 1X18W Recessed Fluorescent Housing: Sheet steel Diffuser: Polycarbonate or plexiglass Painting: White acrylic anionic electro coating, UV-stabilized, upon phosphated 32/22 32/22 treatment Lamp Holder: Polycarbonate, with contacts in phosphor bronze Electric Gear: 240V/50Hz power supply. Hard wire, 0.5 mm2 cross section resistant to . 2P+E terminal block, with max. Allowed lead cross section of 2.5 mm2 Ingress Protect: IP54 as a minimum Regulation: EN60598-EN60529BOQ 2012 52
  • 53. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section 2X36W Recessed Fluorescent Housing: Sheet steel Diffuser: Polycarbonate or plexiglass Painting: White acrylic anionic electro coating, UV-stabilized, upon phosphated 33/22 33/22 treatment Lamp Holder: Polycarbonate, with contacts in phosphor bronze Electric Gear: 240V/50Hz power supply. Hard wire, 0.5 mm2 cross section resistant to . 2P+E terminal block, with max. Allowed lead cross section of 2.5 mm2 Ingress Protect: IP54 as a minimum Regulation: EN60598-EN60529 4X18W Recessed Fluorescent Housing: Sheet steel Diffuser: Polycarbonate or plexiglass Painting: White acrylic anionic electro coating, UV-stabilized, upon phosphated 34/22 34/22 treatment Lamp Holder: Polycarbonate, with contacts in phosphor bronze Electric Gear:With 4 Ballasts and starters 240V/50Hz power supply. Hard wire mm2 cross section, resistant to . 2P+E terminal block, with max. Allowed 0.5 lead cross section of 2.5 mm2 Ingress Protect: IP54 as a minimum Regulation: EN60598-EN60529 4X36W Recessed Fluorescent Housing: Sheet steel Diffuser: Polycarbonate or plexiglass Painting: White acrylic anionic electro coating, UV-stabilized, upon phosphated 35/22 35/22 treatment Lamp Holder: Polycarbonate, with contacts in phosphor bronze Electric Gear: 240V/50Hz power supply. Hard wire, 0.5 mm2 cross section resistant to . 2P+E terminal block, with max. Allowed lead cross section of 2.5 mm2 Ingress Protect: IP54 as a minimum Regulation: EN60598-EN60529BOQ 2012 53
  • 54. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section 1X28W Recessed Fluorescent Housing: sheet steel Optics: Dual parabolic dark light louver in High-gloss anti-reflection and anti-iridescence, very low luminance aluminum Matt anodized 2 , low luminance aluminu Painting: White acrylic anionic electro coating, UV-stabilized, upon phosphate 36/22 36/22 treatment Lamp Holder: Polycarbonate, with contacts in phosphor bronze Electric Gear:240V/50Hz power supply. Hard wire, 0.5 mm2 cross section resistantto . 2P+E terminal block, with max. Allowed lead cross section of mm2 2.5 Ingress Protect.: IP20 as a minimum 1X35W Recessed Fluorescent Housing: sheet steel Optics: Dual parabolic dark light louver in High-gloss anti-reflection and anti-iridescence, very low luminance aluminum Matt anodized 2 , low luminance aluminu Painting: White acrylic anionic electro coating, UV-stabilized, upon phosphate 37/22 37/22 treatment Lamp Holder: Polycarbonate, with contacts in phosphor bronze Electric Gear:240V/50Hz power supply. Hard wire, 0.5 mm2 cross section resistantto . 2P+E terminal block, with max. Allowed lead cross section of mm2 2.5 Ingress Protect.: IP20 as a minimum 2X14W Recessed Fluorescent Housing: sheet steel Optics: Dual parabolic dark light louver in High-gloss anti-reflection and anti-iridescence, very low luminance aluminum Matt anodized 2 , low luminance aluminu Painting: White acrylic anionic electro coating, UV-stabilized, upon phosphate 38/22 38/22 treatment Lamp Holder: Polycarbonate, with contacts in phosphor bronze Electric Gear:240V/50Hz power supply. Hard wire, 0.5 mm2 cross section resistantto . 2P+E terminal block, with max. Allowed lead cross section of mm2 2.5 Ingress Protect.: IP20 as a minimumBOQ 2012 54
  • 55. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section 2X28W Recessed Fluorescent Housing: sheet steel Optics: Dual parabolic dark light louver in High-gloss anti-reflection and anti-iridescence, very low luminance aluminum Matt anodized 2 , low luminance aluminu Painting: White acrylic anionic electro coating, UV-stabilized, upon phosphate 39/22 39/22 treatment Lamp Holder: Polycarbonate, with contacts in phosphor bronze Electric Gear:240V/50Hz power supply. Hard wire, 0.5 mm2 cross section resistantto . 2P+E terminal block, with max. Allowed lead cross section of mm2 2.5 Ingress Protect.: IP20 as a minimum 2X35W Recessed Fluorescent Housing: sheet steel Optics: Dual parabolic dark light louver in High-gloss anti-reflection and anti-iridescence, very low luminance aluminum Matt anodized 2 , low luminance aluminu Painting: White acrylic anionic electro coating, UV-stabilized, upon phosphate 40/22 40/22 treatment Lamp Holder: Polycarbonate, with contacts in phosphor bronze Electric Gear:240V/50Hz power supply. Hard wire, 0.5 mm2 cross section resistantto . 2P+E terminal block, with max. Allowed lead cross section of mm2 2.5 Ingress Protect.: IP20 as a minimum 4X14W Recessed Fluorescent Housing: sheet steel Optics: Dual parabolic dark light louver in High-gloss anti-reflection and anti-iridescence, very low luminance aluminum Matt anodized 2 , low luminance aluminu Painting: White acrylic anionic electro coating, UV-stabilized, upon phosphate 41/22 41/22 treatment Lamp Holder: Polycarbonate, with contacts in phosphor bronze Electric Gear:240V/50Hz power supply. Hard wire, 0.5 mm2 cross section resistantto . 2P+E terminal block, with max. Allowed lead cross section of mm2 2.5 Ingress Protect.: IP20 as a minimumBOQ 2012 55
  • 56. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section 4X28W Recessed Fluorescent Housing: sheet steel Optics: Dual parabolic dark light louver in High-gloss anti-reflection and anti-iridescence, very low luminance aluminum Matt anodized 2 , low luminance aluminu Painting: White acrylic anionic electro coating, UV-stabilized, upon phosphate 42/22 42/22 treatment Lamp Holder: Polycarbonate, with contacts in phosphor bronze Electric Gear:240V/50Hz power supply. Hard wire, 0.5 mm2 cross section resistantto . 2P+E terminal block, with max. Allowed lead cross section of mm2 2.5 Ingress Protect.: IP20 as a minimum 2X14W Recessed Fluorescent Housing: sheet steel with Extruded AL with die-cast end caps Optics: Dual parabolic dark light louver in High-gloss anti-reflection and anti-iridescence, very low luminance aluminum Matt anodized 2 , low luminance aluminu Painting: White acrylic anionic electro coating, UV-stabilized, upon phosphate 43/22 43/22 treatment Lamp Holder: Polycarbonate, with contacts in phosphor bronze Electric Gear:240V/50Hz power supply. Hard wire, 0.5 mm2 cross section resistantto . 2P+E terminal block, with max. Allowed lead cross section of mm2 2.5 Ingress Protect.: IP20 as a minimum 2X28W Recessed Fluorescent Housing: sheet steel with Extruded AL with die-cast end caps Optics: Dual parabolic dark light louver in High-gloss anti-reflection and anti-iridescence, very low luminance aluminum Matt anodized 2 , low luminance aluminu Painting: White acrylic anionic electro coating, UV-stabilized, upon phosphate 44/22 44/22 treatment Lamp Holder: Polycarbonate, with contacts in phosphor bronze Electric Gear:240V/50Hz power supply. Hard wire, 0.5 mm2 cross section resistantto . 2P+E terminal block, with max. Allowed lead cross section of mm2 2.5 Ingress Protect.: IP20 as a minimumBOQ 2012 56
  • 57. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section 2X35W Recessed Fluorescent Housing: sheet steel with Extruded AL with die-cast end caps Optics: Dual parabolic dark light louver in High-gloss anti-reflection and anti-iridescence, very low luminance aluminum Matt anodized 2 , low luminance aluminu Painting: White acrylic anionic electro coating, UV-stabilized, upon phosphate 45/22 45/22 treatment Lamp Holder: Polycarbonate, with contacts in phosphor bronze Electric Gear:240V/50Hz power supply. Hard wire, 0.5 mm2 cross section resistantto . 2P+E terminal block, with max. Allowed lead cross section of mm2 2.5 Ingress Protect.: IP20 as a minimum 4X14W Recessed Fluorescent Housing: sheet steel with Extruded AL with die-cast end caps Optics: Dual parabolic dark light louver in High-gloss anti-reflection and anti-iridescence, very low luminance aluminum Matt anodized 2 , low luminance aluminu Painting: White acrylic anionic electro coating, UV-stabilized, upon phosphate 46/22 46/22 treatment Lamp Holder: Polycarbonate, with contacts in phosphor bronze Electric Gear:240V/50Hz power supply. Hard wire, 0.5 mm2 cross section resistantto . 2P+E terminal block, with max. Allowed lead cross section of mm2 2.5 Ingress Protect.: IP20 as a minimum 2X24W Recessed Fluorescent Housing: Sheet steel Reflector: Matt high efficiency aluminum Louver: Double longitudinal and transversal parabolic louver in low luminance 2 thick, Matt anodized aluminum Painting: White acrylic anionic electro coating, UV-stabilized, upon phosphate 47/22 47/22 treatment Lamp Holder: Polycarbonate, with contacts in phosphor bronze Electric Gear : 240V/50Hz power supply. Hard wire, 0.5 mm2 cross section,resistant to . 2P+E terminal block, with max. Allowed lead cross section of 2.5 mm2 Ingress Protect: IP20 as a minimumBOQ 2012 57
  • 58. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section 2X28W Recessed Fluorescent Housing: Sheet steel Reflector: Matt high efficiency aluminum Louver: Double longitudinal and transversal parabolic louver in low luminance 2 thick, Matt anodized aluminum Painting: White acrylic anionic electro coating, UV-stabilized, upon phosphate 48/22 48/22 treatment Lamp Holder: Polycarbonate, with contacts in phosphor bronze Electric Gear : 240V/50Hz power supply. Hard wire, 0.5 mm2 cross section,resistant to . 2P+E terminal block, with max. Allowed lead cross section of 2.5 mm2 Ingress Protect: IP20 as a minimum 1X54W Recessed Fluorescent Housing: Sheet steel Reflector: Matt high efficiency aluminum Louver: Double longitudinal and transversal parabolic louver in low luminance 2 thick, Matt anodized aluminum Painting: White acrylic anionic electro coating, UV-stabilized, upon phosphate 49/22 49/22 treatment Lamp Holder: Polycarbonate, with contacts in phosphor bronze Electric Gear : 240V/50Hz power supply. Hard wire, 0.5 mm2 cross section,resistant to . 2P+E terminal block, with max. Allowed lead cross section of 2.5 mm2 Ingress Protect: IP20 as a minimum 2X54W Recessed Fluorescent Housing: Sheet steel Reflector: Matt high efficiency aluminum Louver: Double longitudinal and transversal parabolic louver in low luminance 2 thick, Matt anodized aluminum Painting: White acrylic anionic electro coating, UV-stabilized, upon phosphate 50/22 50/22 treatment Lamp Holder: Polycarbonate, with contacts in phosphor bronze Electric Gear : 240V/50Hz power supply. Hard wire, 0.5 mm2 cross section,resistant to . 2P+E terminal block, with max. Allowed lead cross section of 2.5 mm2 Ingress Protect: IP20 as a minimumBOQ 2012 58
  • 59. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section 1X55W Recessed Fluorescent Housing: Sheet steel Reflector: In white aluminum/matt anti-iridescence low luminance aluminum Diffuser: Convex semi-cylinder in micro-punched sheet steel, with polycarbonate end caps supplied with opal polycarbonate, anti-dazzle diffuser/ with micro punched steel diffuser complete with anti- dazzle opal diffuser 51/22 51/22 Painting: Body and reflector in white acrylic anionic electro coating UV-stabilized, upon phosphated treatment Lamp Holder: Polycarbonate, with contacts in phosphor bronze Electric Gear: 240V/50Hz power supply. Hard wire, 0.5 mm2 cross section resistant to . 2P+E terminal block, with max. Allowed lead cross section of 2.5 mm2 2X55W Recessed Fluorescent Housing: Sheet steel Reflector: In white aluminum/matt anti-iridescence low luminance aluminum Diffuser: Convex semi-cylinder in micro-punched sheet steel, with polycarbonate end caps supplied with opal polycarbonate, anti-dazzle diffuser/ with micro punched steel diffuser complete with anti- dazzle opal diffuser 52/22 52/22 Painting: Body and reflector in white acrylic anionic electro coating UV-stabilized, upon phosphated treatment Lamp Holder: Polycarbonate, with contacts in phosphor bronze Electric Gear: 240V/50Hz power supply. Hard wire, 0.5 mm2 cross section resistant to . 2P+E terminal block, with max. Allowed lead cross section of 2.5 mm2 1X18W - Recessed Compact Fluorescent Housing: Vandal-resistant, V2 self-extinguishing, UV Stabilized, Anti-Yellowing polycarbonate Reflector: V2 self-extinguishing polycarbonate, aluminum powder coated through a (CVD) hard-vacuum process 53/22 53/22 Lamp Holder: Polycarbonate, with contacts in phosphor bronze Electric Gear: 240V/50Hz power supply. Hard wire, 0.5 mm2 cross section resistant to 105. 2P+E terminal block, with max. Allowed lead cross section of 2.5 mm2 Ingress Protect: IP20 as a minimum Insulation class: Class IIBOQ 2012 59
  • 60. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section 2X18W - Recessed Compact Fluorescent Housing: Vandal-resistant, V2 self-extinguishing, UV Stabilized, Anti-Yellowing polycarbonate Reflector: V2 self-extinguishing polycarbonate, aluminum powder coated through a (CVD) hard-vacuum process 54/22 54/22 Lamp Holder: Polycarbonate, with contacts in phosphor bronze Electric Gear: 240V/50Hz power supply. Hard wire, 0.5 mm2 cross section resistant to 105. 2P+E terminal block, with max. Allowed lead cross section of 2.5 mm2 Ingress Protect: IP20 as a minimum Insulation class: Class II 1X26W - Recessed Compact Fluorescent Housing: Vandal-resistant, V2 self-extinguishing, UV Stabilized, Anti-Yellowing polycarbonate Reflector: V2 self-extinguishing polycarbonate, aluminum powder coated through a (CVD) hard-vacuum process 55/22 55/22 Lamp Holder: Polycarbonate, with contacts in phosphor bronze Electric Gear: 240V/50Hz power supply. Hard wire, 0.5 mm2 cross section resistant to 105. 2P+E terminal block, with max. Allowed lead cross section of 2.5 mm2 Ingress Protect: IP20 as a minimum Insulation class: Class II 2X26W - Recessed Compact Fluorescent Housing: Vandal-resistant, V2 self-extinguishing, UV Stabilized, Anti-Yellowing Tempered printed Glass polycarbonate Reflector: V2 self-extinguishing polycarbonate, aluminum powder coated through a (CVD) hard-vacuum process 56/22 56/22 Lamp Holder: Polycarbonate, with contacts in phosphor bronze Electric Gear: 240V/50Hz power supply. Hard wire, 0.5 mm2 cross section resistant to 105. 2P+E terminal block, with max. Allowed lead cross section of 2.5 mm2 Ingress Protect: IP43 as a minimum Insulation class: Class IIBOQ 2012 60
  • 61. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section 2X26W - Recessed Compact Fluorescent Housing: Vandal-resistant, V2 self-extinguishing, UV Stabilized, Anti-Yellowing polycarbonate Reflector: V2 self-extinguishing polycarbonate, aluminum powder coated through a (CVD) hard-vacuum process Lamp Holder: Polycarbonate, with contacts in phosphor bronze 57/22 57/22 Electric Gear: 240V/50Hz power supply. Hard wire, 0.5 mm2 cross section resistant to 105. 2P+E terminal block, with max. Allowed lead cross section of 2.5 mm2 Ingress Protect: IP20 as a minimum Insulation class: Class II Regulation: EN60598-EN60529 2X26W - Recessed Compact Fluorescent Housing: Vandal-resistant, V2 self-extinguishing, UV Stabilized, Anti-Yellowing Tempered printed Glass with Square Louver metallic polycarbonate Reflector: V2 self-extinguishing polycarbonate, aluminum powder coated through a (CVD) hard-vacuum process Lamp Holder: Polycarbonate, with contacts in phosphor bronze 58/22 58/22 Electric Gear: 240V/50Hz power supply. Hard wire, 0.5 mm2 cross section resistant to 105. 2P+E terminal block, with max. Allowed lead cross section of 2.5 mm2 Ingress Protect: IP43 as a minimum Insulation class: Class II Regulation: EN60598-EN60529 1X18W - Recessed Compact Fluorescent Housing: Vandal-resistant, V2 self-extinguishing, UV Stabilized, Anti-Yellowing polycarbonate Reflector: V2 self-extinguishing polycarbonate, aluminum powder coated through ‫عدد‬ a (CVD) hard-vacuum process 59/22 59/22 Lamp Holder: Polycarbonate, with contacts in phosphor bronze Electric Gear: 240V/50Hz power supply. Hard wire, 0.5 mm2 cross section resistant to 105. 2P+E terminal block, with max. Allowed lead cross section of 2.5 mm2 Ingress Protect: IP20 as a minimum Insulation class: Class IIBOQ 2012 61
  • 62. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section 2X18W - Recessed Compact Fluorescent Housing: Vandal-resistant, V2 self-extinguishing, UV Stabilized, Anti-Yellowing polycarbonate Reflector: V2 self-extinguishing polycarbonate, aluminum powder coated through a (CVD) hard-vacuum process 60/22 60/22 Lamp Holder: Polycarbonate, with contacts in phosphor bronze Electric Gear: 240V/50Hz power supply. Hard wire, 0.5 mm2 cross section resistant to 105. 2P+E terminal block, with max. Allowed lead cross section of 2.5 mm2 Ingress Protect: IP20 as a minimum Insulation class: Class II 1X26W - Recessed Compact Fluorescent Housing: Vandal-resistant, V2 self-extinguishing, UV Stabilized, Anti-Yellowing polycarbonate Reflector: V2 self-extinguishing polycarbonate, aluminum powder coated through a (CVD) hard-vacuum process 61/22 61/22 Lamp Holder: Polycarbonate, with contacts in phosphor bronze Electric Gear: 240V/50Hz power supply. Hard wire, 0.5 mm2 cross section resistant to 105. 2P+E terminal block, with max. Allowed lead cross section of 2.5 mm2 Ingress Protect: IP20 as a minimum Insulation class: Class II 2X26W - Recessed Compact Fluorescent Housing: Vandal-resistant, V2 self-extinguishing, UV Stabilized, Anti-Yellowing polycarbonate Reflector: V2 self-extinguishing polycarbonate, aluminum powder coated through a (CVD) hard-vacuum process 62/22 62/22 Lamp Holder: Polycarbonate, with contacts in phosphor bronze Electric Gear: 240V/50Hz power supply. Hard wire, 0.5 mm2 cross section resistant to 105. 2P+E terminal block, with max. Allowed lead cross section of 2.5 mm2 Ingress Protect: IP20 as a minimum Insulation class: Class IIBOQ 2012 62
  • 63. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section 100/150W, Recessed Incandescent, E27 Housing: White pressed steel Reflector: Cylindrical parabolic, with an elliptic vault, made of matt aluminumelectrochemically polished and anodized 63/22 63/22 Glass: Clear toughened glass/ toughened glass with an internal frosted ring/glasswith engraved picture Ingress Protect: IP20 as a minimum Insulation class: Class II Approval Mark: CE 100/150W, Recessed Incandescent, E27 Housing: White pressed steel Reflector: Cylindrical parabolic, with an elliptic vault, made of matt aluminumelectrochemically polished and anodized 64/22 64/22 Glass: Clear toughened glass/ toughened glass with an internal frosted ring/glasswith engraved picture Ingress Protect: IP20 as a minimum Insulation class: Class II Approval Mark: CE 11/23W, Energy saver compact Fluorescent, E27 Housing: White pressed steel Reflector: Cylindrical parabolic, with an elliptic vault, made of matt 65/22 65/22 aluminumelectrochemically polished and anodized Glass: Clear toughened glass/ toughened glass with an internal frosted ring/glasswith engraved picture Ingress Protect: IP20 as a minimum Insulation class: Class II Approval Mark: CEBOQ 2012 63
  • 64. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section 100W, Recessed Incandescent, E27 Housing: Fiberglass nylon Reflector: High-efficiency oxidized and polished 99.99 aluminum plated Lamp Holder: Ceramic with silver-plated contacts, or polycarbonate, with contacts 66/22 66/22 in phosphor bronze Electric Gear: 240V/50Hz power supply. Hard wire, 0.75 mm2 cross section resistant to . 2P terminal block, with max. Allowed lead cross section of 2.5 mm2 Ingress Protect: IP20 as a minimum Regulation: EN60598-EN60529 11/23W, Energy saver compact Fluorescent, E27 Housing: Fiberglass nylon Reflector: High-efficiency oxidized and polished 99.99 aluminum plated Lamp Holder: Ceramic with silver-plated contacts, or polycarbonate, with contacts 67/22 67/22 in phosphor bronze Electric Gear: 240V/50Hz power supply. Hard wire, 0.75 mm2 cross section resistant to . 2P terminal block, with max. Allowed lead cross section of 2.5 mm2 Ingress Protect: IP20 as a minimum Regulation: EN60598-EN60529 100/150W, Recessed Incandescent, E27 Housing: Aluminum Reflector: Aluminum, Wide/Narrow beam 68/22 68/22 Diffuser: Crystal glass Ingress Protect: IP20 Insulation class: Class I 70W, Metal halide, RX 7s Housing: Aluminum 69/22 69/22 Reflector: Aluminum, Wide/Narrow beam Diffuser: Crystal glass Ingress Protect: IP20 Insulation class: Class IBOQ 2012 64
  • 65. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section 150W, Metal halide, RX 7s Housing: Aluminum Reflector: Aluminum, Wide/Narrow beam 70/22 70/22 Diffuser: Crystal glass Ingress Protect: IP20 Insulation class: Class I 50W, 12Volts halogen dichroic, Adjustable Recessed Housing: Die-cast aluminum/zamak, with steel bracket holding the terminal block Includes springs for recessed mounting 71/22 71/22 Painting: Humidity-resistant acrylic-resin liquid paint, UV stabilized after a phosphocromate treatment Lamp Holder: Ceramic with silver-plated contacts Ingress Protect: IP20 as a minimum Insulation class: Class II Regulation: EN60598-EN60529 50W, 240Volts halogen dichroic, Adjustable Recessed Housing: Die-cast aluminum/zamak, with steel bracket holding the terminal block Includes springs for recessed mounting 72/22 72/22 Painting: Humidity-resistant acrylic-resin liquid paint, UV stabilized after a phosphocromate treatment Lamp Holder: Ceramic with silver-plated contacts Ingress Protect: IP20 as a minimum Insulation class: Class II Regulation: EN60598-EN60529 40W/240V, Aluminum Reflector Lamp, E14 Housing: Die-cast aluminum/zamak, with steel bracket holding the terminal block Includes springs for recessed mounting Painting: Humidity-resistant acrylic-resin liquid paint, UV stabilized after a 73/22 73/22 phosphocromate treatment Lamp Holder: Ceramic with silver-plated contacts Ingress Protect: IP20 as a minimum Insulation class: Class II Regulation: EN60598-EN60529BOQ 2012 65
  • 66. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section 40W/240V, Aluminum Reflector Lamp, E14 Housing: Die-cast aluminum/zamak,Fixed body with steel bracket holding the terminal block. Includes springs for recessed mounting Painting: Humidity-resistant acrylic-resin liquid paint, UV stabilized after a 74/22 74/22 phosphocromate treatment Lamp Holder: Ceramic with silver-plated contacts Ingress Protect: IP20 as a minimum Insulation class: Class II Regulation: EN60598-EN60529 100W, Aluminum Reflector Halogen Lamp, E27 Housing: Die-cast zamak or sheet steel with polished brass ring. Includes 75/22 75/22 springs for recessed mounting Lamp Holder: Ceramic with silver-plated contacts Ingress Protect: IP20 as a minimum Regulation: EN60598-EN60529 1X36W Surface Fluorescent Housing: White painted sheet steel Optics: longitudinal and transversal louver in High-gloss anti-reflection and anti-iridescence, low luminance aluminum 76/22 76/22 Electric Gear: 240V/50Hz power supply. Hard wire, 0.5 mm2 cross section resistant to .2P+E terminal block, with max. Allowed lead cross section of 2.5 mm2 Ingress Protect: IP20 as a minimum Approval Mark: ENEC 1X58W Surface Fluorescent Housing: White painted sheet steel Optics: longitudinal and transversal louver in High-gloss anti-reflection and anti-iridescence, low luminance aluminum 77/22 77/22 Electric Gear: 240V/50Hz power supply. Hard wire, 0.5 mm2 cross section resistant to .2P+E terminal block, with max. Allowed lead cross section of 2.5 mm2 Ingress Protect: IP20 as a minimum Approval Mark: ENECBOQ 2012 66
  • 67. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section 2X18W Surface Fluorescent Housing: White painted sheet steel Optics: longitudinal and transversal louver in High-gloss anti-reflection and anti-iridescence, low luminance aluminum 78/22 78/22 Electric Gear: With 2 Ballasts & Starter, 240V/50Hz power supply. Hard wire, 0.5 mm2 cross section, resistant to .2P+E terminal block, with max. Allowed lead cross section of 2.5 mm2 Ingress Protect: IP20 as a minimum Approval Mark: ENEC 2X36W Surface Fluorescent Housing: White painted sheet steel Optics: longitudinal and transversal louver in High-gloss anti-reflection and anti-iridescence, low luminance aluminum 79/22 79/22 Electric Gear: With 2 Ballasts & Starter, 240V/50Hz power supply. Hard wire, 0.5 mm2 cross section, resistant to .2P+E terminal block, with max. Allowed lead cross section of 2.5 mm2 Ingress Protect: IP20 as a minimum Approval Mark: ENEC 2X58W Surface Fluorescent Housing: White painted sheet steel Optics: longitudinal and transversal louver in High-gloss anti-reflection and anti-iridescence, low luminance aluminum 80/22 80/22 Electric Gear: With 2 Ballasts & Starter, 240V/50Hz power supply. Hard wire, 0.5 mm2 cross section, resistant to .2P+E terminal block, with max. Allowed lead cross section of 2.5 mm2 Ingress Protect: IP20 as a minimum Approval Mark: ENEC 4X18W Surface Fluorescent Housing: White painted sheet steel Optics: longitudinal and transversal louver in High-gloss anti-reflection and anti-iridescence, low luminance aluminum 81/22 81/22 Electric Gear: With 4 Ballasts & Starter, 240V/50Hz power supply. Hard wire, 0.5 mm2 cross section, resistant to .2P+E terminal block, with max. Allowed lead cross section of 2.5 mm2 Ingress Protect: IP20 as a minimum Approval Mark: ENECBOQ 2012 67
  • 68. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section 4X36W Surface Fluorescent Housing: White painted sheet steel Optics: longitudinal and transversal louver in High-gloss anti-reflection and anti-iridescence, low luminance aluminum 82/22 82/22 Electric Gear: With 4 Ballasts & Starter, 240V/50Hz power supply. Hard wire, 0.5 mm2 cross section, resistant to .2P+E terminal block, with max. Allowed lead cross section of 2.5 mm2 Ingress Protect: IP20 as a minimum Approval Mark: ENEC 1X36W Surface Fluorescent Housing: Sheet steel Optics: dual parabolic dark light louver in High-gloss anti-reflection and anti-iridescence, very low luminance aluminum Painting: White acrylic anionic electro coating, UV-stabilized, upon phosphated treatment 83/22 83/22 Lamp Holder: Polycarbonate, with contacts in phosphor bronze Electric Gear: 240V/50Hz power supply. Hard wire, 0.5 mm2 cross section resistant to . 2P+E terminal block, with max. Allowed lead cross section of 2.5 mm2 Ingress Protect: IP20 as a minimum Regulation: EN60598-EN60529 1X58W Surface Fluorescent Housing: Sheet steel Optics: dual parabolic dark light louver in High-gloss anti-reflection and anti-iridescence, very low luminance aluminum Painting: White acrylic anionic electro coating, UV-stabilized, upon phosphated treatment 84/22 84/22 Lamp Holder: Polycarbonate, with contacts in phosphor bronze Electric Gear: 240V/50Hz power supply. Hard wire, 0.5 mm2 cross section resistant to . 2P+E terminal block, with max. Allowed lead cross section of 2.5 mm2 Ingress Protect: IP20 as a minimum Regulation: EN60598-EN60529BOQ 2012 68
  • 69. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section 1X58W Surface Fluorescent Housing: Sheet steel Optics: dual parabolic dark light louver in High-gloss anti-reflection and anti-iridescence, very low luminance aluminum Painting: White acrylic anionic electro coating, UV-stabilized, upon phosphated treatment 85/22 85/22 Lamp Holder: Polycarbonate, with contacts in phosphor bronze Electric Gear:With 2 Ballasts & Starters 240V/50Hz power supply. Hard wire, 0.5 mm2 cross section, resistant to P+E terminal block, with max. Allowed lead cross section of 2.5 mm2 Ingress Protect: IP20 as a minimum Regulation: EN60598-EN60529 2X36W Surface Fluorescent Housing: Sheet steel Optics: dual parabolic dark light louver in High-gloss anti-reflection and anti-iridescence, very low luminance aluminum Painting: White acrylic anionic electro coating, UV-stabilized, upon phosphated treatment 86/22 86/22 Lamp Holder: Polycarbonate, with contacts in phosphor bronze Electric Gear:With 2 Ballasts & Starters 240V/50Hz power supply. Hard wire, 0.5 mm2 cross section, resistant to P+E terminal block, with max. Allowed lead cross section of 2.5 mm2 Ingress Protect: IP20 as a minimum Regulation: EN60598-EN60529 2X58W Surface Fluorescent Housing: Sheet steel Optics: dual parabolic dark light louver in High-gloss anti-reflection and anti-iridescence, very low luminance aluminum Painting: White acrylic anionic electro coating, UV-stabilized, upon phosphated treatment 87/22 87/22 Lamp Holder: Polycarbonate, with contacts in phosphor bronze Electric Gear:With 2 Ballasts & Starters 240V/50Hz power supply. Hard wire, 0.5 mm2 cross section, resistant to P+E terminal block, with max. Allowed lead cross section of 2.5 mm2 Ingress Protect: IP20 as a minimum Regulation: EN60598-EN60529BOQ 2012 69
  • 70. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section 4X18W Surface Fluorescent Housing: Sheet steel Optics: dual parabolic dark light louver in High-gloss anti-reflection and anti-iridescence, very low luminance aluminum Painting: White acrylic anionic electro coating, UV-stabilized, upon phosphated treatment 88/22 88/22 Lamp Holder: Polycarbonate, with contacts in phosphor bronze Electric Gear:With 4 Ballasts & Starters 240V/50Hz power supply. Hard wire, 0.5 mm2 cross section, resistant to P+E terminal block, with max. Allowed lead cross section of 2.5 mm2 Ingress Protect: IP20 as a minimum Regulation: EN60598-EN60529 4X36W Surface Fluorescent Housing: Sheet steel Optics: dual parabolic dark light louver in High-gloss anti-reflection and anti-iridescence, very low luminance aluminum Painting: White acrylic anionic electro coating, UV-stabilized, upon phosphated treatment 89/22 89/22 Lamp Holder: Polycarbonate, with contacts in phosphor bronze Electric Gear:With 4 Ballasts & Starters 240V/50Hz power supply. Hard wire, 0.5 mm2 cross section, resistant to P+E terminal block, with max. Allowed lead cross section of 2.5 mm2 Ingress Protect: IP20 as a minimum Regulation: EN60598-EN60529 1X36W Surface Fluorescent Housing: Sheet steel Optics: dual parabolic dark light louver in High-gloss anti-reflection and anti-iridescence, very low luminance aluminum Painting: White acrylic anionic electro coating, UV-stabilized, upon phosphated treatment 90/22 90/22 Lamp Holder: Polycarbonate, with contacts in phosphor bronze Electric Gear:With Electronic Ballast, EEI=A1, 240V/50Hz power supply. Hard wire, 0.5 mm2 cross section, resistant to P+E terminal block, with max Allowed lead cross section of 2.5 mm2 Ingress Protect: IP20 as a minimum Regulation: EN60598-EN60529BOQ 2012 70
  • 71. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section 1X58W Surface Fluorescent Housing: Sheet steel Optics: dual parabolic dark light louver in High-gloss anti-reflection and anti-iridescence, very low luminance aluminum Painting: White acrylic anionic electro coating, UV-stabilized, upon phosphated treatment 91/22 91/22 Lamp Holder: Polycarbonate, with contacts in phosphor bronze Electric Gear:With Electronic Ballast, EEI=A1, 240V/50Hz power supply. Hard wire, 0.5 mm2 cross section, resistant to P+E terminal block, with max Allowed lead cross section of 2.5 mm2 Ingress Protect: IP20 as a minimum Regulation: EN60598-EN60529 2X36W Surface Fluorescent Housing: Sheet steel Optics: dual parabolic dark light louver in High-gloss anti-reflection and anti-iridescence, very low luminance aluminum Painting: White acrylic anionic electro coating, UV-stabilized, upon phosphated treatment 92/22 92/22 Lamp Holder: Polycarbonate, with contacts in phosphor bronze Electric Gear:With Electronic Ballast, EEI=A1, 240V/50Hz power supply. Hard wire, 0.5 mm2 cross section, resistant to P+E terminal block, with max Allowed lead cross section of 2.5 mm2 Ingress Protect: IP20 as a minimum Regulation: EN60598-EN60529 2X58W Surface Fluorescent Housing: Sheet steel Optics: dual parabolic dark light louver in High-gloss anti-reflection and anti-iridescence, very low luminance aluminum Painting: White acrylic anionic electro coating, UV-stabilized, upon phosphated treatment 93/22 93/22 Lamp Holder: Polycarbonate, with contacts in phosphor bronze Electric Gear:With Electronic Ballast, EEI=A1, 240V/50Hz power supply. Hard wire, 0.5 mm2 cross section, resistant to P+E terminal block, with max Allowed lead cross section of 2.5 mm2 Ingress Protect: IP20 as a minimum Regulation: EN60598-EN60529BOQ 2012 71
  • 72. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section 4X18W Surface Fluorescent Housing: Sheet steel Optics: dual parabolic dark light louver in High-gloss anti-reflection and anti-iridescence, very low luminance aluminum Painting: White acrylic anionic electro coating, UV-stabilized, upon phosphated treatment 94/22 94/22 Lamp Holder: Polycarbonate, with contacts in phosphor bronze Electric Gear:With Electronic Ballast, EEI=A1, 240V/50Hz power supply. Hard wire, 0.5 mm2 cross section, resistant to P+E terminal block, with max Allowed lead cross section of 2.5 mm2 Ingress Protect: IP20 as a minimum Regulation: EN60598-EN60529 4X36W Surface Fluorescent Housing: Sheet steel Optics: dual parabolic dark light louver in High-gloss anti-reflection and anti-iridescence, very low luminance aluminum Painting: White acrylic anionic electro coating, UV-stabilized, upon phosphated treatment 95/22 95/22 Lamp Holder: Polycarbonate, with contacts in phosphor bronze Electric Gear:With Electronic Ballast, EEI=A1, 240V/50Hz power supply. Hard wire, 0.5 mm2 cross section, resistant to P+E terminal block, with max Allowed lead cross section of 2.5 mm2 Ingress Protect: IP20 as a minimum Regulation: EN60598-EN60529 2X24W Surface Fluorescent Housing: Sheet steel Reflector: Matt high efficiency aluminum Louver: Double longitudinal and transversal parabolic louver in low luminance 2 thick, Matt anodized aluminum 96/22 96/22 Painting: White acrylic anionic electro coating, UV-stabilized, upon Lamp Holder: Polycarbonate, with contacts in phosphor bronze Electric Gear: 240V/50Hz power supply. Hard wire, 0.5 mm2 cross section resistant to . 2P+E terminal block, with max. Allowed lead cross section of 2.5 mm2 Ingress Protect: IP20 as a minimum Regulation: EN60598-EN60529BOQ 2012 72
  • 73. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section 2X28W Surface Fluorescent Housing: Sheet steel Reflector: Matt high efficiency aluminum Louver: Double longitudinal and transversal parabolic louver in low luminance 2 thick, Matt anodized aluminum 97/22 97/22 Painting: White acrylic anionic electro coating, UV-stabilized, upon Lamp Holder: Polycarbonate, with contacts in phosphor bronze Electric Gear: 240V/50Hz power supply. Hard wire, 0.5 mm2 cross section resistant to . 2P+E terminal block, with max. Allowed lead cross section of 2.5 mm2 Ingress Protect: IP20 as a minimum Regulation: EN60598-EN60529 2X54W Surface Fluorescent Housing: Sheet steel Reflector: Matt high efficiency aluminum Louver: Double longitudinal and transversal parabolic louver in low luminance 2 thick, Matt anodized aluminum 98/22 98/22 Painting: White acrylic anionic electro coating, UV-stabilized, upon Lamp Holder: Polycarbonate, with contacts in phosphor bronze Electric Gear: 240V/50Hz power supply. Hard wire, 0.5 mm2 cross section resistant to . 2P+E terminal block, with max. Allowed lead cross section of 2.5 mm2 Ingress Protect: IP20 as a minimum Regulation: EN60598-EN60529 1X55W Recessed Fluorescent Housing: Sheet steel Reflector: In white aluminum/matt anti-iridescence low luminance Aluminum Diffuser: Protruding semi-sphere in micro-perforated sheet metal, with polycarbonate end caps, complete with anti-glare opal plate/ with microperforated steel plate, complete with anti-glare opal plate Painting: Body and reflector in white acrylic anionic electro coating, UV-stabilized 99/22 99/22 upon phosphated treatment Lamp Holder: Polycarbonate, with contacts in phosphor bronze Electric Gear: 240V/50Hz power supply. Hard wire, 0.5 mm2 cross section resistant to . 2P+E terminal block, with max. Allowed lead cross section of 2.5 mm2 Ingress Protect: IP40 as a minimumBOQ 2012 73
  • 74. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section 2X55W Recessed Fluorescent Housing: Sheet steel Reflector: In white aluminum/matt anti-iridescence low luminance Aluminum Diffuser: Protruding semi-sphere in micro-perforated sheet metal, with polycarbonate end caps, complete with anti-glare opal plate/ with microperforated steel plate, complete with anti-glare opal plate Painting: Body and reflector in white acrylic anionic electro coating, UV-stabilized 100/22 100/22 upon phosphated treatment Lamp Holder: Polycarbonate, with contacts in phosphor bronze Electric Gear: 240V/50Hz power supply. Hard wire, 0.5 mm2 cross section resistant to . 2P+E terminal block, with max. Allowed lead cross section of 2.5 mm2 Ingress Protect: IP40 as a minimum 1X54W Recessed Fluorescent Housing: Sheet steel Reflector: In white aluminum/matt anti-iridescence low luminance Aluminum Diffuser: Protruding semi-sphere in micro-perforated sheet metal, with polycarbonate end caps, complete with anti-glare opal plate/ wit microperforated steel plate, complete with anti-glare opal plate 101/22 101/22 Painting: Body and reflector in white acrylic anionic electro coating, UV-stabilized upon phosphated treatment Lamp Holder: Polycarbonate, with contacts in phosphor bronze Electric Gear: 240V/50Hz power supply. Hard wire, 0.5 mm2 cross section resistant to . 2P+E terminal block, with max. Allowed lead crosssection of 2.5 mm2 2X54W Recessed Fluorescent Housing: Sheet steel Reflector: In white aluminum/matt anti-iridescence low luminance Aluminum Diffuser: Protruding semi-sphere in micro-perforated sheet metal, with polycarbonate end caps, complete with anti-glare opal plate/ wit microperforated steel plate, complete with anti-glare opal plate 102/22 102/22 Painting: Body and reflector in white acrylic anionic electro coating, UV-stabilized upon phosphated treatment Lamp Holder: Polycarbonate, with contacts in phosphor bronze Electric Gear: 240V/50Hz power supply. Hard wire, 0.5 mm2 cross section resistant to . 2P+E terminal block, with max. Allowed lead crosssection of 2.5 mm2BOQ 2012 74
  • 75. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section 1X18W Surface Fluorescent Housing: Mild steel, resilient white finish, stainless steel screws Lamp Holder: Unbreakable polycarbonate 103/22 103/22 Painting: Resilient white finish Ingress Protect: IP20 as a minimum Regulation: BS4533 Approval mark: ENEC 1X36W Surface Fluorescent Housing: Mild steel, resilient white finish, stainless steel screws Lamp Holder: Unbreakable polycarbonate 104/22 104/22 Painting: Resilient white finish Ingress Protect: IP20 as a minimum Regulation: BS4533 Approval mark: ENEC 1X58W Surface Fluorescent Housing: Mild steel, resilient white finish, stainless steel screws Lamp Holder: Unbreakable polycarbonate 105/22 105/22 Painting: Resilient white finish Ingress Protect: IP20 as a minimum Regulation: BS4533 Approval mark: ENEC 2X18W Surface Fluorescent Housing: Mild steel, resilient white finish, stainless steel screws Lamp Holder: Unbreakable polycarbonate 106/22 106/22 Painting: Resilient white finish Ingress Protect: IP20 as a minimum Regulation: BS4533 Approval mark: ENEC 2X36W Surface Fluorescent Housing: Mild steel, resilient white finish, stainless steel screws Lamp Holder: Unbreakable polycarbonate 107/22 107/22 Painting: Resilient white finish Ingress Protect: IP20 as a minimum Regulation: BS4533 Approval mark: ENECBOQ 2012 75
  • 76. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section 2X58W Surface Fluorescent Housing: Mild steel, resilient white finish, stainless steel screws Lamp Holder: Unbreakable polycarbonate 108/22 108/22 Painting: Resilient white finish Ingress Protect: IP20 as a minimum Regulation: BS4533 Approval mark: ENEC 1X36W Surface Fluorescent Housing: Mild steel, resilient white finish, stainless steel screws Lamp Holder: Unbreakable polycarbonate 109/22 109/22 Painting: Coating with high gloss white epoxy Ingress Protect: IP20 as a minimum Regulation: BS4533 Approval mark: ENEC 1X58W Surface Fluorescent Housing: Mild steel, resilient white finish, stainless steel screws Lamp Holder: Unbreakable polycarbonate 110/22 110/22 Painting: Coating with high gloss white epoxy Ingress Protect: IP20 as a minimum Regulation: BS4533 Approval mark: ENEC 2X36W Surface Fluorescent Housing: Mild steel, resilient white finish, stainless steel screws Lamp Holder: Unbreakable polycarbonate 111/22 111/22 Painting: Coating with high gloss white epoxy Ingress Protect: IP20 as a minimum Regulation: BS4533 Approval mark: ENEC 2X58W Surface Fluorescent Housing: Mild steel, resilient white finish, stainless steel screws Lamp Holder: Unbreakable polycarbonate 112/22 112/22 Painting: Coating with high gloss white epoxy Ingress Protect: IP20 as a minimum Regulation: BS4533 Approval mark: ENECBOQ 2012 76
  • 77. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section 2X36W Surface Fluorescent Housing: Mild steel, resilient white finish, stainless steel screws Lamp Holder: Unbreakable polycarbonate Painting: Coating with high gloss white epoxy (Protective steel wire with white 113/22 113/22 polyesterFinish Ingress Protect: IP20 as a minimum Regulation: BS4533 Approval mark: ENEC 2X58W Surface Fluorescent Housing: Mild steel, resilient white finish, stainless steel screws Lamp Holder: Unbreakable polycarbonate Painting: Coating with high gloss white epoxy (Protective steel wire with white 114/22 114/22 polyesterFinish Ingress Protect: IP20 as a minimum Regulation: BS4533 Approval mark: ENEC 1X36W Surface Fluorescent Housing: Mild steel, resilient white finish, stainless steel screws Half angle reflector Wall bracket Lamp Holder: Unbreakable polycarbonate 115/22 115/22 Painting: Resilient white finish Ingress Protect: IP20 as a minimum Regulation: BS4533 Approval mark: ENEC 1X58W Surface Fluorescent Housing: Mild steel, resilient white finish, stainless steel screws Half angle reflector Wall bracket Lamp Holder: Unbreakable polycarbonate 116/22 116/22 Painting: Resilient white finish Ingress Protect: IP20 as a minimum Regulation: BS4533 Approval mark: ENECBOQ 2012 77
  • 78. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section 1X18W Surface Fluorescent Housing: Metallic slim line structure consisted of metal base and Diffuser: Prismatic acrylic Lamp Holder: Strong polycarbonate 117/22 117/22 Painting: Base and cover electro-statically painted with pure white colour Ingress Protect: IP 54 as a minimum Insulation class: Class I Regulation: EN 60598-1, EN 60598-2-1, EN 55015 1X36W Surface Fluorescent Housing: Metallic slim line structure consisted of metal base and Diffuser: Prismatic acrylic Lamp Holder: Strong polycarbonate 118/22 118/22 Painting: Base and cover electro-statically painted with pure white colour Ingress Protect: IP 54 as a minimum Insulation class: Class I Regulation: EN 60598-1, EN 60598-2-1, EN 55015 1X58W Surface Fluorescent Housing: Metallic slim line structure consisted of metal base and Diffuser: Prismatic acrylic Lamp Holder: Strong polycarbonate 119/22 119/22 Painting: Base and cover electro-statically painted with pure white colour Ingress Protect: IP 54 as a minimum Insulation class: Class I Regulation: EN 60598-1, EN 60598-2-1, EN 55015 1X18W Surface Fluorescent Housing: Extruded aluminum with V2 vandal resistant PC end caps Diffuser: Dust-proof, UV stabilized opal plexiglass Painting: Acrylic-resin liquid paint, UV-stablised after a phosphor-chromate treatmen 120/22 120/22 Lamp Holder: Polycarbonate with phosphorous bronze contacts Electric Gear: 240V/50Hz power supply. Hard wire, 0.5 mm2 cross section resistant to P+E terminal block, with max. Allowed lead cross section of 2.5 mm2 Ingress Protect: IP 43 as a minimum Regulation: EN60598-EN60529BOQ 2012 78
  • 79. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section 1X36W Surface Fluorescent Housing: Extruded aluminum with V2 vandal resistant PC end caps Diffuser: Dust-proof, UV stabilized opal plexiglass Painting: Acrylic-resin liquid paint, UV-stablised after a phosphor-chromate treatmen 121/22 121/22 Lamp Holder: Polycarbonate with phosphorous bronze contacts Electric Gear: 240V/50Hz power supply. Hard wire, 0.5 mm2 cross section resistant to P+E terminal block, with max. Allowed lead cross section of 2.5 mm2 Ingress Protect: IP 43 as a minimum Regulation: EN60598-EN60529 1X58W Surface Fluorescent Housing: Extruded aluminum with V2 vandal resistant PC end caps Diffuser: Dust-proof, UV stabilized opal plexiglass Painting: Acrylic-resin liquid paint, UV-stablised after a phosphor-chromate treatmen 122/22 122/22 Lamp Holder: Polycarbonate with phosphorous bronze contacts Electric Gear: 240V/50Hz power supply. Hard wire, 0.5 mm2 cross section resistant to P+E terminal block, with max. Allowed lead cross section of 2.5 mm2 Ingress Protect: IP 43 as a minimum Regulation: EN60598-EN60529 1x18W, Fluorescent surface fixture Housing: Deep drawn, torsion resistant steel housing Diffuser: Trapezoidal single piece plastic diffuser made of opal, UV-resistant Plexiglas 123/22 123/22 Painting: White powder-coated Electric Gear: 240V/50Hz power supply. Hard wire, 0.5 mm2 cross section resistant to P+E terminal block, with max Ingress Protect: IP 50 as minimum Approvals: ENECBOQ 2012 79
  • 80. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section 1x36W, Fluorescent surface fixture Housing: Deep drawn, torsion resistant steel housing Diffuser: Trapezoidal single piece plastic diffuser made of opal, UV-resistant Plexiglas 124/22 124/22 Painting: White powder-coated Electric Gear: 240V/50Hz power supply. Hard wire, 0.5 mm2 cross section resistant to P+E terminal block, with max Ingress Protect: IP 50 as minimum Approvals: ENEC 1x58W, Fluorescent surface fixture Housing: Deep drawn, torsion resistant steel housing Diffuser: Trapezoidal single piece plastic diffuser made of opal, UV-resistant Plexiglas 125/22 125/22 Painting: White powder-coated Electric Gear: 240V/50Hz power supply. Hard wire, 0.5 mm2 cross section resistant to P+E terminal block, with max Ingress Protect: IP 50 as minimum Approvals: ENEC 2x28W, Fluorescent surface fixture Housing: Deep drawn, torsion resistant steel housing Diffuser: Trapezoidal single piece plastic diffuser made of opal, UV-resistant Plexiglas 126/22 126/22 Painting: White powder-coated Electric Gear: 240V/50Hz power supply. Hard wire, 0.5 mm2 cross section resistant to P+E terminal block, with max Ingress Protect: IP 50 as minimum Approvals: ENEC 2x36W, Fluorescent surface fixture Housing: Deep drawn, torsion resistant steel housing Diffuser: Trapezoidal single piece plastic diffuser made of opal, UV-resistant Plexiglas 127/22 127/22 Painting: White powder-coated Electric Gear: 240V/50Hz power supply. Hard wire, 0.5 mm2 cross section resistant to P+E terminal block, with max Ingress Protect: IP 50 as minimum Approvals: ENECBOQ 2012 80
  • 81. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section 2x58W, Fluorescent surface fixture Housing: Deep drawn, torsion resistant steel housing Diffuser: Trapezoidal single piece plastic diffuser made of opal, UV-resistant Plexiglas 128/22 128/22 Painting: White powder-coated Electric Gear: 240V/50Hz power supply. Hard wire, 0.5 mm2 cross section resistant to P+E terminal block, with max Ingress Protect: IP 50 as minimum Approvals: ENEC 18 4 60x60 Low 4 Louver/ Prismatic Diffuser 129/22 129/22-A Loss Ballasts, Starters, Metal capacitor 18 4 60x60 Low 4 Louver/ Prismatic Diffuser 129/22 129/22-B Surface Mounting Loss Ballasts, Starters, Metal capacitor 1X18W Surface Fluorescent Housing: G.R.P Diffuser: Trapezoidal Vandal resistant polycarbonate/acrylic, with stainless steel 130/22 130/22 clips Ingress Protect: IP65 Regulation: BS4533 1X36W Surface Fluorescent Housing: G.R.P 131/22 131/22 Diffuser: Trapezoidal Vandal resistant polycarbonate/acrylic, with stainless steel clips Ingress Protect: IP65 Regulation: BS4533 1X58W Surface Fluorescent Housing: G.R.P 132/22 132/22 Diffuser: Trapezoidal Vandal resistant polycarbonate/acrylic, with stainless steel clips Ingress Protect: IP65 Regulation: BS4533BOQ 2012 81
  • 82. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section 2X18W Surface Fluorescent Housing: G.R.P 133/22 133/22 Diffuser: Trapezoidal Vandal resistant polycarbonate/acrylic, with stainless steel clips Ingress Protect: IP65 Regulation: BS4533 2X36W Surface Fluorescent Housing: G.R.P 134/22 134/22 Diffuser: Trapezoidal Vandal resistant polycarbonate/acrylic, with stainless steel clips Ingress Protect: IP65 Regulation: BS4533 2X58W Surface Fluorescent Housing: G.R.P 135/22 135/22 Diffuser: Trapezoidal Vandal resistant polycarbonate/acrylic, with stainless steel clips Ingress Protect: IP65 Regulation: BS4533 1X36W Surface Fluorescent Housing: Stainless steel Reflector: Pre-painted, white, anti-yellowing zinc-plated steel Diffuser: Shock resistant tempered glass Painting: Polyester powder 136/22 136/22 Lamp Holder: Polycarbonate with phosphorous bronze contacts Electric Gear: 240V/50Hz power supply. Hard wire, 0.5 mm2 cross section resistant to P+E terminal block, with max. Allowed lead cros section of 2.5 mm2 Ingress Protect: IP657 Regulation: EN60598-EN60529BOQ 2012 82
  • 83. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section 1X58W Surface Fluorescent Housing: Stainless steel Reflector: Pre-painted, white, anti-yellowing zinc-plated steel Diffuser: Shock resistant tempered glass Painting: Polyester powder 137/22 137/22 Lamp Holder: Polycarbonate with phosphorous bronze contacts Electric Gear: 240V/50Hz power supply. Hard wire, 0.5 mm2 cross section resistant to P+E terminal block, with max. Allowed lead cros section of 2.5 mm2 Ingress Protect: IP657 Regulation: EN60598-EN60529 2X36W Surface Fluorescent Housing: Stainless steel Reflector: Pre-painted, white, anti-yellowing zinc-plated steel Diffuser: Shock resistant tempered glass Painting: Polyester powder 138/22 138/22 Lamp Holder: Polycarbonate with phosphorous bronze contacts Electric Gear: 240V/50Hz power supply. Hard wire, 0.5 mm2 cross section resistant to P+E terminal block, with max. Allowed lead cros section of 2.5 mm2 Ingress Protect: IP657 Regulation: EN60598-EN60529 2X58W Surface Fluorescent Housing: Stainless steel Reflector: Pre-painted, white, anti-yellowing zinc-plated steel Diffuser: Shock resistant tempered glass Painting: Polyester powder 139/22 139/22 Lamp Holder: Polycarbonate with phosphorous bronze contacts Electric Gear: 240V/50Hz power supply. Hard wire, 0.5 mm2 cross section resistant to P+E terminal block, with max. Allowed lead cros section of 2.5 mm2 Ingress Protect: IP657 Regulation: EN60598-EN60529BOQ 2012 83
  • 84. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section 2x26W ceiling fixture Housing: Cylindrical sheet Aluminum Reflector: Polycarbonate metalized with high grade aluminum powder Painting: UV-stabilized, polyester powder upon phosphated treatment 140/22 140/22 Lamp Holder: Polycarbonate with phosphorous bronze contacts Electric Gear:240V/50Hz power supply. Hard wire, 0.5 mm2 cross section resistant to P+E terminal block, with max. Allowed lead cross section of 2.5 mm2 Ingress Protect: IP40 as minimum Regulation: EN60598-EN60529 2x26W ceiling fixture Housing: Cylindrical sheet Aluminum with Low luminance louver Reflector: Polycarbonate metalized with high grade aluminum powder Painting: UV-stabilized, polyester powder upon phosphated treatment 141/22 141/22 Lamp Holder: Polycarbonate with phosphorous bronze contacts Electric Gear:240V/50Hz power supply. Hard wire, 0.5 mm2 cross section resistant to P+E terminal block, with max. Allowed lead cross section of 2.5 mm2 Ingress Protect: IP40 as minimum Regulation: EN60598-EN60529 2x26W ceiling fixture Housing: Cylindrical sheet Aluminum with Clear white silk-screen printed glass Reflector: Polycarbonate metalized with high grade aluminum powder Painting: UV-stabilized, polyester powder upon phosphated treatment 142/22 142/22 Lamp Holder: Polycarbonate with phosphorous bronze contacts Electric Gear:240V/50Hz power supply. Hard wire, 0.5 mm2 cross section resistant to P+E terminal block, with max. Allowed lead cross section of 2.5 mm2 Ingress Protect: IP40 as minimum Regulation: EN60598-EN60529BOQ 2012 84
  • 85. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section 2x26W ceiling fixture Housing: Injected moulded polycarbonate Diffuser: Injected moulded opal PMMA 143/22 143/22 Painting: UV-stabilized, polyester powder upon phosphated treatment Electric Gear: 240V/50Hz power supply. Hard wire, 0.5 mm2 cross section resistant to P+E terminal block, with max. Allowed lead cross section of 2.5 mm2 Ingress Protect: IP54 as minimum wall mounting fixture Housing & Trim: Self-extinguishing techno-polymer (UL94-Vo rated, 960oC glow wire test 144/22 144/22 Diffuser: Internally mat glass diffuser Electric Gear: 240/12V, 50Hz power supply Ingress Protect: IP44 as minimum Insulation class: Class II Approval: ENEC Lamp: 2x20W, Halogen, G4 wall mounting fixture Housing: Self-extinguishing techno-polymer (UL94-Vo rated, 960oC glow wire test), 380mm diameter 145/22 145/22 Diffuser: Satin glass diffuser Electric Gear: 240V, 50Hz power supply Ingress Protect: IP40 as a minimum Insulation class: Class II Approval: ENEC Lamp: 2x23W Fluorescent E27BOQ 2012 85
  • 86. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section wall mounting fixture Housing: Self-extinguishing techno-polymer (UL94-Vo rated, 960oC glow wire test), 380mm diameter 146/22 146/22 Diffuser: Satin glass diffuser Electric Gear: 240V, 50Hz power supply Ingress Protect: IP40 as a minimum Insulation class: Class II Approval: ENEC Lamp: 2x18W Fluorescent G11 wall mounting fixture Housing: Self-extinguishing techno-polymer (UL94-Vo rated, 960oC glow wire test), 380mm diameter Diffuser: Satin glass diffuser 147/22 147/22 Electric Gear: 240V, 50Hz power supply Ingress Protect: IP40 as a minimum Insulation class: Class II Approval: ENEC Lamp: 2x60W,Inc. E27, with infrared motion sensor Up-Light Housing: Extruded aluminum with injected zamak end caps Reflector: Highly polished asymmetrical reflector in hammer finish aluminum Diffuser: UV lens: borosilicate glass 148/22 148/22 Electric Gear: 240V, 50Hz power supply Ingress Protect: IP30 as a minimum Insulation class: Class I Lamp: 70-150 Metal halide, Rx7 Up-Light Housing: Techno polymer high resistant to mechanical and thermic shocks adjustable up to Reflector: Polished aluminum 149/22 149/22 Diffuser: Toughened glass protective screen Electric Gear: 240V, 50Hz power supply Ingress Protect: IP40 as a minimum Insulation class: Class II Lamp: 70-150 Metal halide, Rx7sBOQ 2012 86
  • 87. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section Metal halide, Fc2 250 Up-Light Housing: Techno polymer high resistant to mechanical and thermic shocks adjustable up to Reflector: Polished aluminum 150/22 150/22 Diffuser: Toughened glass protective screen Electric Gear: 240V, 50Hz power supply Ingress Protect: IP40 as a minimum Insulation class: Class II Lamp: 70-150 Metal halides, Rx7s Housing: Self-extinguishing techno-polymer (UL94-Vo rated, 960oC glow wire test Reflector: Aluminum Diffuser: Internally mat glass 151/22 151/22 Electric Gear: 240V, 50Hz power supply Ingress Protect: IP44 as a minimum Insulation class: Class II Approval: ENEC Lamp: 1x23W EL Fluorescent, E27 Housing: Self-extinguishing techno-polymer (UL94-Vo rated, 960oC glow wire test Reflector: Aluminum Diffuser: Internally mat glass 152/22 152/22 Electric Gear: 240V, 50Hz power supply Ingress Protect: IP44 as a minimum Insulation class: Class I Approval: ENEC Lamp: 2x26W Compact Fluorescent, G24d-3BOQ 2012 87
  • 88. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section Housing: Self-extinguishing techno-polymer (UL94-Vo rated, 960oC glow wire test Reflector: Aluminum Diffuser: Internally mat glass 153/22 153/22 Electric Gear: 240V, 50Hz power supply Ingress Protect: IP44 as a minimum Insulation class: Class I Approval: ENEC Lamp: 1x26W Compact Fluorescent Recessed, G24d-3 Housing: Injected polycarbonate Painting: White/black nickel lacquered Diffuser: Opal pressed glass 154/22 154/22 Ingress Protect: IP43 as a minimum Insulation class: Class II Lamp: 1x60W Incandescent, E27 Housing: Injected polycarbonate Painting: White/black nickel lacquered Diffuser: Opal pressed glass 155/22 155/22 Ingress Protect: IP43 as a minimum Insulation class: Class II Lamp: 1x11W, Compact EL Fluorescent, E27 Housing: Cast aluminum base and ring, corrosion-proof treated. Stainless screws and nuts Painting: Powder paint finish, leather grain appearance 156/22 156/22 Diffuser: Opal glass/opal polycarbonate Dimension: 115mm Dx240mm dia. approximately Ingress Protect: IP54 as a minimum Insulation class: Class II Lamp: 1x100W Incandescent, E27BOQ 2012 88
  • 89. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section Housing: Cast aluminum base and ring, corrosion-proof treated. Stainless screws and nuts Painting: Powder paint finish, leather grain appearance 157/22 157/22 Diffuser: Opal glass/opal polycarbonate Dimension: 115mm Dx240mm dia. approximately Ingress Protect: IP54 as a minimum Insulation class: Class II Lamp: 1x18W, Compact EL Fluorescent, G24d-2 Housing: Cast aluminum base and ring, corrosion-proof treated. Stainless screws and nuts Painting: Powder paint finish, leather grain appearance 158/22 158/22 Diffuser: Opal glass/opal polycarbonate Dimension: 115mm Dx240mm dia. approximately Ingress Protect: IP54 as a minimum Insulation class: Class II Lamp: 1x100W Incandescent, E27 Wire guard Housing: Cast aluminum base and ring, corrosion-proof treated. Stainless screws and nuts Painting: Powder paint finish, leather grain appearance 159/22 159/22 Diffuser: Opal glass/opal polycarbonate Dimension: 115mm Dx240mm dia. approximately Ingress Protect: IP54 as a minimum Insulation class: Class II Lamp: (Wire guard)1x18W, Compact EL Fluorescent, G24d-2BOQ 2012 89
  • 90. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section Housing: Cast aluminum base and ring, corrosion-proof treated. Stainless screws and nuts Painting: Powder paint finish, leather grain appearance 160/22 160/22 Diffuser: Opal glass/opal polycarbonate Dimension: 115mm Dx240mm dia. approximately Ingress Protect: IP54 as a minimum Insulation class: Class II Dimension: 260mm Lx165mm Wx110mmD Oval shape Lamp: approximately Incandescent, E27 Housing: Cast aluminum base and ring, corrosion-proof treated. Stainless screws and nuts Painting: Powder paint finish, leather grain appearance 161/22 161/22 Diffuser: Opal glass/opal polycarbonate Ingress Protect: IP54 as a minimum Insulation class: Class II Dimension: 260mm Lx165mm Wx110mmD approximately Oval shape Lamp: 1x18W, Compact EL Fluorescent, G24d-2 Housing: Cast aluminum base and ring, corrosion-proof treated. Stainless screws and nuts Painting: Powder paint finish, leather grain appearance Diffuser: Opal glass/opal polycarbonate 162/22 162/22 Ingress Protect: IP54 as a minimum Insulation class: Class II Lamp: 1x100W Incandescent, E27 Dimension: Oval shape 260mm Lx165mm Wx110mmD approximatelywith Wire guardBOQ 2012 90
  • 91. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section Housing: Cast aluminum base and ring, corrosion-proof treated. Stainless screws and nuts Painting: Powder paint finish, leather grain appearance Diffuser: Opal glass/opal polycarbonate 163/22 163/22 Dimension: 115mm Dx240mm dia. approximately Ingress Protect: IP54 as a minimum Insulation class: Class II Lamp: 1x18W, Compact EL Fluorescent, G24d-2 Dimension: 260mm Lx165mm Wx110mmD approximately Oval shape Wire guard Wall bracket Body, Base & adaptor: In injection moulded black glass-filled polyester Input Voltage: 240V, 50Hz 164/22 164/22 Ingress Protection: IP54 as a minimum Standard: EN 60598 Lamp: 120W PAR 38, E27 Wall bracket Body, Base & adaptor: In injection moulded black glass-filled polyester Input Voltage: 240V, 50Hz 165/22 165/22 Ingress Protection: IP65 as a minimum Standard: EN 60598 Lamp: 120W PAR 38, E27BOQ 2012 91
  • 92. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section Housing / frame: 1 Reflector: In anodized, polished and hammered 99.85 aluminum fixed by 2 screws Glass: Tempered, 5 mm thick, thermal shock and impact resistant [UNI 7142 3 tests, B.S. 3193 1/23 1/23 Painting: Polyester powder, black, white, or sand blasted silver, . 4 per W.D. engr. - chromate treatment, resistant to corrosive and saline environments, an U.V stabilized, Lamp holder: In ceramics, 5 if required Electric gear: 240 V/50 HZ power supply with thermal protection 6 Housing / frame: 1 Reflector: In anodized, polished and hammered 99.85 aluminum fixed by 2 screws Glass: Tempered, 5 mm thick, thermal shock and impact resistant [UNI 7142 3 tests, B.S. 3193 2/23 2/23 Painting: Polyester powder, black, white, or sand blasted silver, . 4 per W.D. engr. - chromate treatment, resistant to corrosive and saline environments, an U.V stabilized, Lamp holder: In ceramics, 5 if required Electric gear: 240 V/50 HZ power supply with thermal protection 6 Black, white. In powder 1/23 2/23 3/23 3/23 coated steel used to direct the light beam Black, white, in steel, used 1/23 2/23 4/23 4/23 to reduce dazzle better direct the light beam Black, white, in cationic 1/23 2/23 5/23 5/23 Electro - coatedBOQ 2012 92
  • 93. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section Housing / frame: , 1 internal screws, and stainless steel external screws. Supporting brackets in black painted steel. with cooling fins Reflector: In Oxidized, 2 pure aluminum 99.8% 6/23 6/23 Glass: , installed on 3 the frame with silicone gluing Painting: Epoxy powder coating. Black colour 4 Lamp holder: Up to 500 watt. (R7s), halogen lamp 5 if required Electric gear: 240 V/50 HZ power supply with thermal protection 6 Housing / frame: , 1 internal screws, and stainless steel external screws. Supporting brackets in black painted steel. with cooling fins. But Low electric waste projector with accessories Reflector: In Oxidized, 2 7/23 7/23 pure aluminum 99.8% Glass: , installed on 3 the frame with silicone gluing Painting: , capacitor, igniter 4 and protection fuse Lamp holder: 70 watt. (Rx 7s) / metal halide lamp 5 Black, steel deflector screen with 1/23 2/23 8/23 8/23 orientable fins oven painted with polyester powders Black, steel deflector screen with 1/23 2/23 orientable fins oven painted with polyester powders Black, fixed screen oven 9/23 9/23 painted with polyester powders Black, steel deflector screen with 1/23 2/23 orientable fins oven painted with polyester powders Black, fixed screen oven painted with polyester powders 10/23 10/23 And with Black, powdersBOQ 2012 93
  • 94. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section Housing / frame: Ditto 1 Reflector: Ditto, but 2 2 Glass: Tempered, 5 mm thick, thermal shock and impact resistant [UNI 7142 3 tests B.S. 3193 Painting: Ditto 4 11/23 11/23 Lamp holder: Ditto 5 Electric gear: Ditto 6 Equipment: Ditto, but gasket in silicone rubber material & Integrated control 7 gear Protocol scale: Fixture must equipped with 0 180 8 Security dowels or rack with screw Housing / frame: Ditto 1 Reflector: Ditto, but 2 2 Glass: Tempered, 5 mm thick, thermal shock and impact resistant [UNI 7142 3 tests B.S. 3193 Painting: Ditto 4 12/23 12/23 Lamp holder: Ditto 5 Electric gear: Ditto 6 Equipment: Ditto, but gasket in silicone rubber material & Integrated control 7 gear Protocol scale: Fixture must equipped with 0 180 8 Security dowels or rack with screw Housing / frame: Ditto 1 Reflector: Ditto, but 2 2 Glass: Tempered, 5 mm thick, thermal shock and impact resistant [UNI 7142 3 tests B.S. 3193 Painting: Ditto 4 13/23 13/23 Lamp holder: Ditto 5 Electric gear: Ditto 6 Equipment: Ditto, but gasket in silicone rubber material & Integrated control 7 gear Protocol scale: Fixture must equipped with 0 180 8 Security dowels or rack with screwBOQ 2012 94
  • 95. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section Body: (UNI 5076) with cooling fins. Suspension hooks 1 . Goniometric device for a precise pointing adjustment Painting: Black, polyester powder coating. Other RAL colour shall as per W.D 2 engr. approval Reflector: Oxidized, - 3 14/23 14/23 as per W.D. engr. approval aluminum with symmetrical, or asymmetrical beam Diffuser: (5mm 4 thick) . Water proof silicone rubber sealing gasket Equipment: , containing all electrical parts 5 , Porcelain bulb socket HPF, igniter, . PG 13.5 Body: (UNI 5076) with cooling fins. Suspension hooks 1 . Goniometric device for a precise pointing adjustment Painting: Black, polyester powder coating. Other RAL colour shall as per W.D 2 engr. approval Reflector: Oxidized, - 3 15/23 15/23 as per W.D. engr. approval aluminum with symmetrical, or asymmetrical beam Diffuser: (5mm 4 thick) . Water proof silicone rubber sealing gasket Equipment: , containing all electrical parts 5 , Porcelain bulb socket HPF, igniter, . PG 13.5 Body: (UNI 5076) with cooling fins. Suspension hooks 1 . Goniometric device for a precise pointing adjustment Painting: Black, polyester powder coating. Other RAL colour shall as per W.D 2 engr. approval Reflector: Oxidized, - 3 16/23 16/23 as per W.D. engr. approval aluminum with symmetrical, or asymmetrical beam Diffuser: (5mm 4 thick) . Water proof silicone rubber sealing gasket Equipment: , containing all electrical parts 5 , Porcelain bulb socket HPF, igniter, . PG 13.5BOQ 2012 95
  • 96. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section Housing / frame: Ditto 1 Reflector: Ditto 2 Glass: Ditto 3 Painting: Ditto, but resistant to salty environments 4 Lamp holder: Ditto 5 Electric gear: Ditto, but with maximum allowed lead cross section 4 mm2 6 17/23 17/23 Equipment: Ditto, but retained steel screws with special anticorrosion and anti 7 gripping treatment Regulations: Ditto 8 Ingress protection: IP 65 as a minimum 9 Approval mark: ENEC 10 Wattage: 150, 250,400 watt. (E 40), metal halide/ high pressure sodium lamp 11 Housing / frame: Ditto 1 Reflector: Ditto 2 Glass: Ditto 3 Painting: Ditto, but resistant to salty environments 4 Lamp holder: Ditto 5 Electric gear: Ditto, but with maximum allowed lead cross section 4 mm2 6 18/23 18/23 Equipment: Ditto, but retained steel screws with special anticorrosion and anti 7 gripping treatment Regulations: Ditto 8 Ingress protection: IP 65 as a minimum 9 Approval mark: ENEC 10 Wattage: 150, 250,400 watt. (E 40), metal halide/ high pressure sodium lamp 11 Housing / frame: Ditto 1 Reflector: Ditto 2 Glass: Ditto 3 Painting: Ditto, but resistant to salty environments 4 Lamp holder: Ditto 5 Electric gear: Ditto, but with maximum allowed lead cross section 4 mm2 6 19/23 19/23 Equipment: Ditto, but retained steel screws with special anticorrosion and anti 7 gripping treatment Regulations: Ditto 8 Ingress protection: IP 65 as a minimum 9 Approval mark: ENEC 10 Wattage: 150, 250,400 watt. (E 40), metal halide/ high pressure sodium lamp 11BOQ 2012 96
  • 97. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section Housing / frame: Ditto 1 Reflector: Ditto 2 Glass: Ditto 3 Painting: Ditto, but resistant to salty environments 4 Lamp holder: Ditto 5 Electric gear: Ditto, 6 20/23 20/23 admiralty brass, 2.5mm2 Equipment: Ditto 7 Regulations: Ditto 8 Ingress protection: IP 65 as a minimum 9 Approval mark: ENEC 10 Wattage: 1000 watt. (E 40), metal halide 11 65 20/23 Control gear . Recommended installation at a maximum distance of 3 meters from the fixture 21/23 21/23 Containg: ballast, igniter and capacitor. If the box is placed at a distance of over 3 meters from the fixture, insert the igniter in the flood light housing 23/20 Baffle louver : Black, white, in steel, used to reduce dazzle better direct the light 22/23 22/23 beam 23/20 Protective guard : Black, white , in plastic coated steel rod for protection against 23/23 23/23 impact 23/20 Pole bracket : Bracket for pole mounting 1 to 2 opposite flood lights for Ø 60/76 24/23 24/23 mm poles 23/20 Pole bracket : Bracket for pole mounting 1 to 2 opposite flood lights for Ø 60/76 25/23 25/23 mm poles with Two to 4 opposite flood lightsBOQ 2012 97
  • 98. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section Housing / frame: ENAB 46 100 die cast aluminum with cooling fins Reflector: Anodised and polished aluminum 99.85, with fin for the recovery of unused light Glass: Tempered, 5 mm thick, thermal shock and impact resistant UNI 7142 tests, B.S. 3193 Coating: Black polyester powder applied after a phosphochromate treatment 26/23 26/23 resistant to corrosion and briny mist Lamp holder: Ditto Electric gear: 415 V power supply flexible wire terminated with camps. With fiber glass braid, 2.5mm2 cross section. 2P + T terminal block with maximum allowed lead cross section 4mm2 Supply: Hinge opening from the back of the fixture with airing valve In aluminum box (IP65) with 26/23 Control gear 27/23 27/23 steel removable control gear tray. Contains: ballast and capacitor Baffle louver: Cationic electro -coated 23/26 steel. Used to reduce dazzle And direct the light beam 28/23 28/23 Protective guard : Black, white , in plastic 23/26 coated steel rod. For protection against impact 29/23 29/23 Housing / frame: 1 wide cooling fins Reflector: 99.85 anodised aluminum 2 2 Diffuser: , 4 mm thick, thermal shock and 3 UNI 7142 tests, B.S. 3193 impact resistant. 30/23 30/23 Painting: Epoxy cationic electro coating, upon phosphochromate treatment 4 resistant to corrosion, and Saline environments. The second stage is a U.V stabilizing priming. Finally a rough finish with metallised silver acrylic coating is applied Lamp holder: In ceramics, with silver - plated contacts 5 Electric gear: 240 V /50 HZ power supply, flexible wire terminated with quick 6BOQ 2012 98
  • 99. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section Housing / frame: 1 wide cooling fins Reflector: 99.85 anodised aluminum 2 2 Diffuser: , 4 mm thick, thermal shock and 3 UNI 7142 tests, B.S. 3193 impact resistant. 31/23 31/23 Painting: Epoxy cationic electro coating, upon phosphochromate treatment 4 resistant to corrosion, and Saline environments. The second stage is a U.V stabilizing priming. Finally a rough finish with metallised silver acrylic coating is applied Lamp holder: In ceramics, with silver - plated contacts 5 Electric gear: 240 V /50 HZ power supply, flexible wire terminated with quick 6 1000 Control Gear for HID lamps Ballasts Very short magnetic paths 1 Transverse laminations with no stray field functions 2 Short heat paths 3 32/23 32/23 Winding insulation class H materials 4 Vacuum impregnated core and coil / glass fibre filled nylon 5 coil covers Long service life 6 Low power consumption 7 tw = 130 ( up to 150 watt. lamps ) and tw = 150 (from 250 until 1000 400 Control Gear for HID lamps Ballasts Very short magnetic paths 1 Transverse laminations with no stray field functions 2 Short heat paths 3 33/23 33/23 Winding insulation class H materials 4 Vacuum impregnated core and coil / glass fibre filled nylon 5 coil covers Long service life 6 Low power consumption 7 tw = 130 ( up to 150 watt. lamps ) and tw = 150 (from 250 until 2000BOQ 2012 99
  • 100. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section 2000 Control Gear for HID lamps Ballasts Very short magnetic paths 1 Transverse laminations with no stray field functions 2 Short heat paths 3 34/23 34/23 Winding insulation class H materials 4 Vacuum impregnated core and coil / glass fibre filled nylon 5 coil covers Long service life 6 Low power consumption 7 tw = 130 ( up to 150 watt. lamps ) and tw = 150 (from 250 until 2000 400 Ignitors Mains voltage : 240 V + 10% or 415V +10% 1 Mains frequency: 50 HZ 2 3 Minimizing power consumption 4 35/23 35/23 Low temperature rise, withstand temp. to + 100 5 Fully encapsulated; moiture, saline and oil resistant 6 Fully insulated housing 7 Single point fixing 8 .D engineer approval 1000 Ignitors Mains voltage : 240 V + 10% or 415V +10% 1 Mains frequency: 50 HZ 2 3 Minimizing power consumption 4 36/23 36/23 Low temperature rise, withstand temp. to + 100 5 Fully encapsulated; moiture, saline and oil resistant 6 Fully insulated housing 7 Single point fixing 8 .D engineer approvalBOQ 2012 100
  • 101. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section 2000 Ignitors Mains voltage : 240 V + 10% or 415V +10% 1 Mains frequency: 50 HZ 2 3 Minimizing power consumption 4 37/23 37/23 Low temperature rise, withstand temp. to + 100 5 Fully encapsulated; moiture, saline and oil resistant 6 Fully insulated housing 7 Single point fixing 8 .D engineer approval Capacitor moralized polypropylene Low capacitor loss 1 Self healing 2 In built discharge resister 3 Impregnate free construction 4 38/23 38/23 1000MΩ High insulation resistance 5 Noryl Capacitor can is manufactured from flame retardant polyhenylene oxide 6 Compound Flame class rating UL 94 V 7 Wall thickness 1.5mm as a minimum 8 Certified by British Standards Institute to BSEN 61048, and BSEN 61049, and 9 400 C.W.A Constant Wattage for (HID) Lamps Vacuum impregnated cone and coil 1 Winding insulation class H materials 2 39/23 39/23 typical 75 Delta t 3 tw = 150 4 Made in accordance to international standards 5 IEC 60922 / IEC60923 Capacitor attached to (CWA) shall be of aluminum housingBOQ 2012 101
  • 102. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section 1000 C.W.A Constant Wattage for (HID) Lamps Vacuum impregnated cone and coil 1 Winding insulation class H materials 2 40/23 40/23 typical 75 Delta t 3 tw = 150 4 Made in accordance to international standards 5 IEC 60922 / IEC60923 Capacitor attached to (CWA) shall be of aluminum housing 2000 C.W.A Constant Wattage for (HID) Lamps Vacuum impregnated cone and coil 1 Winding insulation class H materials 2 41/23 41/23 typical 75 Delta t 3 tw = 150 4 Made in accordance to international standards 5 IEC 60922 / IEC60923 Capacitor attached to (CWA) shall be of aluminum housing 415 C.W.A Constant Wattage for (HID) Lamps Vacuum impregnated cone and coil 1 Winding insulation class H materials 2 42/23 42/23 typical 75 Delta t 3 tw = 150 4 Made in accordance to international standards 5 IEC 60922 / IEC60923 Capacitor attached to (CWA) shall be of aluminum housingBOQ 2012 102
  • 103. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section 415V/50 HZ 1000 C.W.A Constant Wattage for (HID) Lamps Vacuum impregnated cone and coil 1 Winding insulation class H materials 2 43/23 43/23 typical 75 Delta t 3 tw = 150 4 Made in accordance to international standards 5 IEC 60922 / IEC60923 Capacitor attached to (CWA) shall be of aluminum housing 415V/50 HZ 2000 C.W.A Constant Wattage for (HID) Lamps Vacuum impregnated cone and coil 1 Winding insulation class H materials 2 44/23 44/23 typical 75 Delta t 3 tw = 150 4 Made in accordance to international standards 5 IEC 60922 / IEC60923 Capacitor attached to (CWA) shall be of aluminum housing Under water flood light Housing: Electro- polished stainless steel with 1 hole Ø 8 mm 1 Lamps: Two-numbers PAR 36, 12 volts, 25 Watts 2 Cables: Water proof interconnecting cable 2 x 1.5mm2 3 4m between luminaries and transformer & 2 m between flood lights 45/23 45/23 Ingress protection: IP 68 4 Insulation class: III 5 IP 66, class II Safety transformer: According to EN 62558 & DIN VDE 0570 6 with 2 m connecting cable with power plug Coloured disks: Blue, green, yellow, or red 7 Total Diameter: Ø 135 mm 8BOQ 2012 103
  • 104. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section Under water flood light Housing: Electro- polished stainless steel Pg 16 cable gland on recessed body 1 and lamp housing Lamps: One number PAR 56, 12 volts, 300 watts 2 46/23 46/23 Cables: Three meters water proof cable 3 HO7 2 x4mm2 Ingress protection: IP 68 4 Insulation class: III 5 Installation: One cable gland with hose connector on recessed body for soft 6 PVC safety hose Ø 28 x 3.5 mm Under water flood light Housing with frame: 1 Reflector: . In anodized and polished, pressed 2 aluminum 99.85 Cover: Hinge opening in die- cast aluminum with stainless steel latches 3 Diffuser: Tempered glass, 5mm thick, thermal shock and impact resistant [UNI 4 47/23 47/23 .S. 3193], or anti- glare, , 7142 polycarbonate diffuser Painting: Polyester powder applied after a phosphocromate threatmet 5 Lamp holder: In ceramics, 6 Electric gear: 240V/50HZ power supply. Silicone wired terminated with quick 7 connect damps in admiralty brass, fiberglass braid, 1.0mm2 . 2P Under water flood light Housing with frame: 1 Reflector: . In anodized and polished, pressed 2 aluminum 99.85 Cover: Hinge opening in die- cast aluminum with stainless steel latches 3 Diffuser: Tempered glass, 5mm thick, thermal shock and impact resistant [UNI 4 48/23 48/23 .S. 3193], or anti- glare, , 7142 polycarbonate diffuser Painting: Polyester powder applied after a phosphocromate threatmet 5 Lamp holder: In ceramics, 6 Electric gear: 240V/50HZ power supply. Silicone wired terminated with quick 7 connect damps in admiralty brass, fiberglass braid, 1.0mm2 . 2PBOQ 2012 104
  • 105. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section 48/23 Pole adapter Ø 76: In aluminum, to be used to apply the fixture on a Ø 76 pole 49/23 49/23 49/23 Dual connection: , cationic electrocoated, 50/23 50/23 Adapter: , cationic electrocoated, finished aluminum 50/23 Double moun. on mast: . for on 51/23 51/23 mast installation of two fixtures. Connection Ø 60/76 51/23 Wall bracket: In tropicalised steel. Used for wall mounting. Connection Ø 60. Angle 52/23 52/23 15 Under water flood light Housing with frame: Body: 1 Reflector: Bright aluminum 2 Cover: Hinge opening in die- cast aluminum with stainless steel latches 3 Diffuser: Prismatic glass or flat tempered glass 4 Painting: High quality special polyester powder coated body, resistant against 5 53/23 53/23 weather Lamp holder: In ceramics 6 Electric gear: 240 V/ 50 HZ power supply. Silicone wired terminated with quick 7 connect damps in admiralty brass, fiberglass braid, 1.0mm2 . 2P terminal block with maximum allowed lead cross section of 2.5 mm2 Standard supply: 8BOQ 2012 105
  • 106. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section Under water flood light Housing with frame: 1 Reflector: . In anodized and polished, Bright 2 aluminum Cover: Hinge opening in die- cast aluminum with stainless steel latches 3 Diffuser: Prismatic glass or flat tempered glass, 5mm thick, thermal shock and 4 54/23 54/23 impact resistant [UNI 7142 .S. 3193], or anti- glare, Painting: Polyester High quality special polyester powder coated body, resistant 5 against weather Lamp holder: In ceramics, 6 Electric gear: 240 V/ 50 HZ power supply. Silicone wired terminated with quick 7 Housing / cover: 1 Diffuser: , U.V. stabilized, smooth, clear or opal 2 polycarbonate Reflector: In aluminum 99.85 louver 3 Painting: In several stages : grey, or sanded silver epoxy cationic 4 55/23 55/23 electrocoating , upon phosphochromate treatment, resistant to corrosive and Saline environments, followed by UV stabilising priming; lastly , a rough finish of coating is applied Lamp holder: In ceramics, 5 Electric gear: 240V/50HZ supply with thermal protection (if 6 required), silicone insulation; cross- section: 1mm2. 2P terminal block (maximum 55/23 Wall arm: Black, or sanded silver, in aluminum for wall mounting with wall 56/23 56/23 attachments 56/23 Bent arm: Black or sanded silver. Intropicalised black cationic electrocoated steel 57/23 57/23 To be mounted on corona series accessoriesBOQ 2012 106
  • 107. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section 57/23 Corona flange: Black or sanded silver. Epoxy cationic electrocoating , aluminum with 6 arm stop devices to reinforce the composition Corona flange: Black or sanded silver. Epoxy cationic electrocoating , aluminum with 6 arm stop devices to reinforce the composition Ø 125mm 58/23 58/23 Corona: Black or sanded silver: , epoxy cationic electrocoating with rough finish. Designed to enable mounting of bent arm Connection Ø 60mm Diffuser: In vandal resistant and V2 , UV 1 stabilized, , injection molded with a blowing process. The diffuser shall optimum transparency for better transmission of the light flux 59/23 59/23 Colours: Clear or opal 2 Regulations: Produced according to applicable EN 60598 standards, level of 3 protection in compliance with EN 60529 standard Diameter: 450mm , or 500 mm 4 59/23 Lampholder base: Aluminum base, black, white aluminum wiring container 1 painted after phosphochromate treatment. base. Ø 60 connection if supplied with diffuser Ingress protection: IP 65 2 60/23 60/23-A Approval mark: ENEC 3 Insulation class: II 4 Watt. (E27/40), mercury vapours lamp 125 80 Wattage 5 Hint 1: Lamp with built- in igniter to be used for 50/70 watt. , high pressure sodium lamps. Hint 2: The item is supplied with, ballast, starter, capacitor, and lamp - as per W.D. engr. approvalBOQ 2012 107
  • 108. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section 60/23 Lampholder base: Aluminum base, black, white aluminum wiring container 1 painted after phosphochromate treatment. base. Ø 60 connection if supplied with diffuser Ingress protection: IP 65 2 60/23 60/23-B Approval mark: ENEC 3 Insulation class: II 4 Watt 100 Wattage 5 Hint 1: Lamp with built- in igniter to be used for 50/70 watt. , high pressure sodium lamps. Hint 2: The item is supplied with, ballast, starter, capacitor, and lamp - as per W.D. engr. approval 60/23 Lampholder base: Aluminum base, black, white aluminum wiring container 1 painted after phosphochromate treatment. base. Ø 60 connection if supplied with diffuser Ingress protection: IP 65 2 60/23 60/23-C Approval mark: ENEC 3 Insulation class: II 4 Watt. (E27/40), high pressure sodium lamp 70,100 50 Wattage 5 Hint 1: Lamp with built- in igniter to be used for 50/70 watt. , high pressure sodium lamps. Hint 2: The item is supplied with, ballast, starter, capacitor, and lamp - as per W.D. engr. approval 59/23 Lampholder base: Aluminum base, black, white aluminum wiring container 1 painted after phosphochromate treatment. base. Ø 60 connection if supplied with diffuser Ingress protection: IP 65 2 Approval mark: ENEC 3 61/23 61/23 Insulation class: II 4 Watt. (E27/40), mercury vapours lamp 125 80 Wattage 5 Hint 1: Lamp with built- in igniter to be used for 50/70 watt. , high pressure sodium lamps Hint 2: The item is supplied with, ballast, starter, capacitor, and lamp - as per W.D. engr. approvalBOQ 2012 108
  • 109. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section 59/23 Lampholder base: Aluminum base, black, white aluminum wiring container 1 painted after phosphochromate treatment. base. Ø 60 connection if supplied with diffuser Ingress protection: IP 65 2 Approval mark: ENEC 3 62/23 62/23 Insulation class: II 4 Watt. (E27/40), mercury vapours lamp 125 80 Wattage 5 Hint 1: Lamp with built- in igniter to be used for 50/70 watt. , high pressure sodium lamps. Hint 2: The item is supplied with, ballast, starter, capacitor, and lamp - as per W.D. engr. approval Louvre: In 99.85 aluminum. Grey colour which is ideal for better lamp shielding 59/23 Lampholder base: Aluminum base, black, white aluminum wiring container 1 painted after phosphochromate treatment. base. Ø 60 connection if supplied with diffuser Ingress protection: IP 65 2 Approval mark: ENEC 3 63/23 63/23 Insulation class: II 4 Watt. (E27/40), mercury vapours lamp 125 80 Wattage 5 Hint 1: Lamp with built- in igniter to be used for 50/70 watt. , high pressure sodium lamps. Hint 2: The item is supplied with, ballast, starter, capacitor, and lamp - as per W.D. engr. approval Louvre for zone 2 ( UNI 10819 ): In 99.85 aluminum. Grey colour which is ideal 59/23 Lampholder base: Aluminum base, black, white aluminum wiring container 1 painted after phosphochromate treatment. base. Ø 60 connection if supplied with diffuser Ingress protection: IP 65 2 Approval mark: ENEC 3 64/23 64/23 Insulation class: II 4 Watt. (E27/40), mercury vapours lamp 125 80 Wattage 5 Hint 1: Lamp with built- in igniter to be used for 50/70 watt. , high pressure sodium lamps. Hint 2: The item is supplied with, ballast, starter, capacitor, and lamp - as per W.D. engr. approval Ceiling unit: Black, , with steel tube painted by epoxyBOQ 2012 109
  • 110. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section 59/23 Lampholder base: Aluminum base, black, white aluminum wiring container 1 painted after phosphochromate treatment. base. Ø 60 connection if supplied with diffuser Ingress protection: IP 65 2 Approval mark: ENEC 3 65/23 65/23 Insulation class: II 4 Watt. (E27/40), mercury vapours lamp 125 80 Wattage 5 Hint 1: Lamp with built- in igniter to be used for 50/70 watt. , high pressure sodium lamps. Hint 2: The item is supplied with, ballast, starter, capacitor, and lamp - as per W.D. engr. approval Long arm: Black, , , with a rough Globes / Diffusers with base Diffuser: Made of vandal resistant, polycarbonate. Supplied with fiber glass 1 nylon base. Lamp holder: 2 in the base. For installation on Ø 60mm poles or arms Regulations: Produced according to applicable EN 60598 standards. The level 3 66/23 66/23 of protection complies with the EN 60529 standard Ingress protection: IP 65 as a minimum 4 Approval mark: ENEC 5 Insulation class: II 6 Colours: Clear or opal 7 Diameter: 220mm up to 320mm Sphere, Oval, or Trapezezoid 8 66/23 Arm: , with a rough finish Wall Mount: Black, in aluminum, , with 67/23 67/23 a rough finish 67/23 Nylon arm: Black, fiber glass nylon. For wall mounting 68/23 68/23BOQ 2012 110
  • 111. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section Housing: In venal resistant, polycarbonate, , 1 Frame: 2 Reflector: In aluminum or sheet steel, symmetric 3 Diffuser: 4 Painting: In several stage 5 69/23 69/23 First stage: , upon phosphochromate treatment. Resistant to corrosive and saline environments Second stage: , and lastly rough finish with acrylic coating Lamp holder: In polycarbonate, with phosphor bronze contacts 6 Electric gear: 240V/50 Hz power supply. Hard wire 0.50 7 105 Housing / frame: 1 Reflector: Adjustable reflector, anodised, polished aluminum 2 Glass: Clear, tempered, , impact and load resistant (max. 2000 3 Kg as above item Painting: Ditto 4 70/23 70/23 Lamp holder: In ceramics, with silver plated contacts 5 Electric gear: Ditto, (as above item), but with thermal protection 6 Standard supply: With recessed mounting box 7 Equipment: Silicone rubber gasket removable electric gear tray 8 Two cable glands in fiber glass nylon Ø Regulations: Produced in compliance with EN60598- CEI-34-21 standards 9 Housing / frame: In AISI 316 , with 1 convex screen and radial louver frame Reflector: In anodised and polished aluminum 2 Glass: Clear, tempered, lenticular, , impact and load resistant 3 max. 2000 kg 71/23 71/23 as above item Painting: Ditto 4 Lamp holder: In ceramics, with silver plated contacts 5 as above item Electric gear: Ditto 6 Standard supply: Supplied with recessed mounting box 7 as above item Equipment: Ditto 8 as above item Regulations: Ditto 9BOQ 2012 111
  • 112. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section BOLLARD Housing: In extruded aluminum, cylindrical section. In white, black, or silver 1 hammer finish Top: Cast aluminum 2 Base: Cast iron 3 Diffuser: Temperature shock resistant glass diffuser within the deflectors, or 4 72/23 72/23 clear polycarbonate vandal resistant, U.V. Painting: High quality special polyester powder coated body resistant to 5 weather Lamp holder: In polycarbonate (FL), or in ceramics 6 Control gear: Low loss ballasts (FL), class H insulation, and tw: 130 , HPF 7 capacitor with metal casing BOLLARD Housing: , aluminum and stainless steel, cylindrical section 1 In graphite, or silver Diffuser: Shock resistant opal borositicate glass or opal polycarbonate 2 Painting: With corrosion proofing treatment, and powdered paint finish 3 Stainless steel nuts and screws 73/23 73/23 Diameter: ( top 160mm , base 180mm ) as a minimum 4 Height: 700 mm up to 1100mm 5 Ingress protection: IP 54 as a minimum 6 Wattage: 80 watt. , (E27), mercury vaporous 7 watt. , (E27), 70 Sodium lamp with internal igniter BOLLARD Housing: , aluminum and stainless steel, cylindrical section 1 In graphite, or silver Diffuser: Borositicate glass 2 Reflector: Pure anodized aluminum 3 Mounting: With mounting plate for bolting to a foundations 4 74/23 74/23 Standard supply: With galvanized steel anchor bolts. Stainless steel nuts and 5 screws Control gear: HPF control gear to the approval of W.D. engr 6 Diameter: 220 mm. as a minimum 7 Height: 1000 mm 8 Ingress protection: IP 55 as a minimum 9BOQ 2012 112
  • 113. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section Industrial Luminaire Housing: 1 Diffuser: Tempered protective glass, 5 mm thick , thermal shock and impact 2 resistant or clear polycarbonate , prismatic inside, and smooth out side , dust proof and impact resistant , vandal resistant and V2 , 75/23 75/23 Reflector: In pressed prismatic (wide/ narrow beam) 99.85 anodised aluminum 3 polished, for high light efficiency Painting: With polyester powder, black colour , upon phosphochromate 4 treatment , resistant to corrosive and salty environments Lamp holder: In ceramics, 5 Electric gear: 240 V/ 50 Hz power supply with thermal protection. Silicone 6 75/23 Panel ( 600 x 600 mm ): In white sheet steel, for 600 x 600 mm false ceiling panel 76/23 76/23 75/23 Protective guard: In plastic coated black steel rod. Screw mounting 77/23 77/23 75/23 Adjustable bracket: In black, steel adjustable bracket 78/23 78/23 75/23 Baffle louver: In black, 79/23 79/23 Industrial Luminaire Body: , complete with 1 Painting: Black, polyerster powder coating 2 Reflector: Shaped reflector in 99.8 % aluminum oxidized, anode process 3 80/23 80/23 polished for a high light output Diffuser: ( 5 mm 4 thick ), . The diffuser is locked Equipment: 5BOQ 2012 113
  • 114. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section Industrial Luminaire Body: , complete with 1 Painting: Black, polyerster powder coating 2 Reflector: Shaped reflector in 99.8 % aluminum oxidized, anode process 3 81/23 81/23 polished for a high light output Diffuser: ( 5 mm 4 thick ), . The diffuser is locked Equipment: 5 81/23 80/23 82/23 82/23 Protective guard: Galvanized Steel ST. 52-3 to DIN 17100 Shaft: Steel octagonal pole 1 Height: 3 meters 2 Top: 76 mm 3 Bottom: 150 mm. as a minimum 4 83/23 83/23 Thickness: 3 mm 5 ST. 52-3 to DIN 17100 Base plate: 300 x 300 x 20 mm 6 Galvanizing process: Hot dip galvanizing to BS EN 1461 7 Coating thickness: 100 (micro meter) as a minimum 8 Anchor bolts: Four numbers to ASTM grade 90 9 Door opening: With inspection window 10BOQ 2012 114
  • 115. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section Galvanized Steel ST. 52-3 to DIN 17100 Shaft: Steel octagonal pole 1 Height: 4.6 meters 2 Top: 76 mm 3 Bottom: 150 mm. as a minimum 4 Thickness: 3 mm 5 84/23 84/23 Base plate: 300 x 300 x 20 mm 6 Galvanizing process: Hot dip galvanizing to BS EN 1461 7 Coating thickness: 100 (micro meter) as a minimum 8 Anchor bolts: Four numbers to ASTM grade 90 9 Door opening: With inspection window 10 Arm bracket(s) & anchor bolts: Single, double, 3 ways or 4 way 11 Galvanized Steel ST. 52-3 to DIN 17100 Shaft: Steel octagonal pole 1 Height: 6 meters 2 Top: 76 mm 3 Bottom: 156 mm 4 Thickness: 3 mm 5 85/23 85/23 Base plate: Ditto, but 300 x 300 x 20 mm 6 Galvanizing process: Hot dip galvanizing to BS EN 1461 7 Coating thickness: 100 (micro meter) as a minimum 8 Anchor bolts: Four numbers to ASTM grade 90 9 Door opening: With inspection window 10 Arm bracket(s) & anchor bolts: Single, double, 3 ways or 4 way 11 Galvanized Steel ST. 52-3 to DIN 17100 Shaft: Steel octagonal pole 1 Height: 8 meters 2 Top: 90 mm 3 Bottom: 195 mm. as a minimum 4 86/23 86/23 Thickness: 3 mm 5 Base plate: Ditto, but 400 x 400 x 20 mm 6 Galvanizing process: Hot dip galvanizing to BS EN 1461 7 Coating thickness: 100 (micro meter) as a minimum 8 Anchor bolts: Four numbers to ASTM grade 90 9 Door opening: With inspection window 10BOQ 2012 115
  • 116. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section Galvanized Steel ST. 52-3 to DIN 17100 Shaft: Steel octagonal pole 1 Height: 10 meters 2 87/23 87/23 Top: 118 mm 3 Bottom: 240 mm. as a minimum 4 Thickness: 3 mm 5 Galvanized Steel Shaft: Ditto, but design wind speed not less than160 km/h 1 Height: 12 meters 2 Top: 118 mm 3 Bottom: 245 mm 4 88/23 88/23 Thickness: 3 mm 5 Base plate: Ditto, but 400 x 400 x 30 mm 6 Galvanizing process: Ditto, but passivation coating to be applied 7 Coating thickness: 100 (micro meter) as a minimum 8 Anchor bolts: Four numbers to ASTM grade 90 9 Door opening: With inspection window 10 Galvanized Steel Shaft: Ditto, but design wind speed not less than 160 km/h 1 Height: 14 meters 2 Top: 118 mm 3 Bottom: 250mm. as a minimum 4 89/23 89/23 Thickness: 4 mm 5 Base plate: Ditto, but 400 x 400 x 30 mm 6 Galvanizing process: Ditto, but passivation coating to be applied 7 Coating thickness: 100 (micro meter) as a minimum 8 Anchor bolts: Four numbers to ASTM grade 90 9 Door opening: With inspection window 10BOQ 2012 116
  • 117. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section Cast Aluminum Post: Cast Aluminum 1 B.S. 1706 44200 Height: 3/ 3.40 meters 2 Bottom: 360mm 3 Thickness: 6 to 8 mm 4 90/23 90/23 Powder coating: 100 (Micro meter) as a minimum to B.S. 6496, to any 5 approved standard RAL colours Decorative element: 20 ( micrometer ) as a minimum to B.S. 1615 gold 6 anodising shall be on top cap of pole /lantern , top of pole and middle of post and on the top of lantern supports Anchor bolts: The threaded portion of the anchor shall be only hot dip 7 Wall bracket Post: Cast Aluminum 1 B.S. 1706 44200 Height: 3/ 3.40 meters 2 Bottom: 360mm 3 Thickness: 6 to 8 mm 4 91/23 91/23 Powder coating: 100 (Micro meter) as a minimum to B.S. 6496, to any 5 approved standard RAL colours Decorative element: 20 ( micrometer ) as a minimum to B.S. 1615 gold 6 anodising shall be on top cap of pole /lantern , top of pole and middle of post and on the top of lantern supports Anchor bolts: The threaded portion of the anchor shall be only hot dip 7 Ceiling unit Post: Cast Aluminum 1 B.S. 1706 44200 Height: 3/ 3.40 meters 2 Bottom: 360mm 3 Thickness: 6 to 8 mm 4 92/23 92/23 Powder coating: 100 (Micro meter) as a minimum to B.S. 6496, to any 5 approved standard RAL colours Decorative element: 20 ( micrometer ) as a minimum to B.S. 1615 gold 6 anodising shall be on top cap of pole /lantern , top of pole and middle of post and on the top of lantern supports Anchor bolts: The threaded portion of the anchor shall be only hot dip 7BOQ 2012 117
  • 118. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section Cast Aluminum Post: Cast Aluminum 1 B.S. 1706 44200 Height: 3.4 meters as a minimum 2 Bottom: 360mm 3 Thickness: 6 to 8 mm 4 93/23 93/23 Powder coating: 100 (Micro meter) as a minimum to B.S. 6496, to any 5 approved standard RAL colours Decorative element: Ditto. , but with decorative arm brackets 6 Anchor bolts: The threaded portion of the anchor shall be only hot dip 7 galvanized with 2 nuts, 2 washers (500 mm long, Ø 20 mm) as a minimum Fixing screws: Stainless steel grade 304 8 Cast Aluminum Post: Cast Aluminum 1 B.S. 1706 44200 Height: 3/ 3.40 meters 2 Bottom: 360mm 3 Thickness: 6 to 8 mm 4 94/23 94/23 Powder coating: 100 (Micro meter) as a minimum to B.S. 6496, to any 5 approved standard RAL colours Decorative element: Ditto. , bottom of post too 6 Anchor bolts: The threaded portion of the anchor shall be only hot dip 7 galvanized with 2 nuts, 2 washers (500 mm long, Ø 20 mm) as a minimum Fixing screws: Stainless steel grade 304 8 Cast Aluminum Post: Cast Aluminum 1 B.S. 1706 44200 Height: 3/ 3.40 meters 2 Bottom: 360mm 3 Thickness: 6 to 8 mm 4 95/23 95/23 Powder coating: 100 (Micro meter) as a minimum to B.S. 6496, to any 5 approved standard RAL colours Decorative element: 20 ( micrometer ) as a minimum to B.S. 1615 gold 6 anodising shall be on top cap of pole /lantern , top of pole and middle of post and on the top of lantern supports Anchor bolts: The threaded portion of the anchor shall be only hot dip 7BOQ 2012 118
  • 119. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section Cast Iron Post: Composed of elements in UNI EN 1561 cast iron with core in FE 510 1 UNI 7810 steel , 1461 standards Core: Made up of six tubes of different cross sections, welded together at their 2 junctions. Provided with an M10 earthing bolt. With two slots for leading cables 96/23 96/23 into the core, & a slot for installation of a class I insulation terminal board with fuse. (50 cm height) made from composite materials to be applied to the core to protect it irradiated polyolefinic, and butyric mastic from corrosion The cast iron post: Is made up of a number of elements fitted over each other 3 Cast Iron Brackets Description Wall bracket in UNI EN 1561 cast iron 1 Specifications: Wall bracket is composed as follows 2 a. A cast iron bracket with wall plate cast in a single piece and decorated. A wall plate (41 cm height, width 15.5 cm) with three holes (Ø 1 cm) for fixing to the wall with expansion bolts, a collar with two horizontal flutes, a large volute 97/23 97/23 rising up wards from the center of the wall plate, nine leaves, of which three terminate in volutes, two are double, and four are normal, a central fruit motif, and a cymatium at the outer extremity (Ø 7 cm). The bracket is provided with a inches GAS threaded tube with nut and rose in stainless steel for attaching the light fixture and an internal tube for the passage of a power cable. The total height of the wall bracket is 50 cm, with a projection of 49 cm Support For Ceiling Lanterns Description: Made in FE 360 UNI 7810 steel aluminum 1 Specifications 2 a. A rose in steel aluminum (Height 12.5cm, Ø 12.5 cm ) , in the form of a smooth inverted bell decorated with four leaves , fixed to the tube with M 8 stainless steel grubscrew 98/23 98/23 b. A steel support tube (Ø 2.2 cm) with a slot at the upper end for the power cable, . At the top there are holes for securing the tube to the ceiling with an M8 stainless steel bolt c. and a safety grubscrew to lock the light fixture in place The total height of the support is 60 to 100 cm. The max. LoadBOQ 2012 119
  • 120. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section Chandelier Description: Made in FE 360 UNI 7810 steel, UNI EN 1561 cast iron, and UNI 1 EN 1563 nodular cast iron and UNI 4514 aluminum Specifications: The chandelier is composed as follows 2 a. A rose sheet aluminum (height 12.5 cm, diam. 12.5 cm) in the form of a smooth inverted bell, fixed to the tube with an M8 stainless steel grubscrew 99/23 99/23 b. A steel support tube (Ø 2.7 cm) with a slot at the upper and for power cables . At the top are holes for securing the tube to the ceiling with an M 10 stainless steel bolt A decorative sleeve in cast aluminum, height 14.5 cm and decorated with mouldings. The sleeve is fixed to the support tube with an M8 stainless steel grubscrew Lamp Post For Gardens And Gates Description: Lamp post made in UNI EN 1561 cast iron with internal core in 1 galvanized FE 510 UNI 7810 steel Specifications: The chandelier is composed as follows 2 a. A core composed of a tube (Ø 3.4 cm), and a flange (Ø 9 cm) in steel, welded together and over all height 31 cm. It shall be provided with an M8 earting bolt 100/23 100/23 And a lateral whole (Ø 1.5 cm) for leading the earthing cable into the core. The flange has a central whole (Ø 1.5 cm) for the passage of a power cable, and the holes (Ø 8.5 mm) at 120 anchor bolts. thread for attaching the fight fixture b. A base in cast iron, height 5 cm, and diameter 21 cm, tapered and decorated 23/100 23/99 23/98 23/97 23/96 Lantern Materials: The lantern is made throughout in sheet aluminum, cast aluminum 1 UNI 5076, UNI 5079 alloy (UNI 7369/4), Dimensions & weight: Height 70 cm, Ø 47 cm.Weight 8.2 kg (excluding 2 electrical components 101/23 101/23 Structure 3 The lantern is composed of , three uprights and a base section in cast aluminum with a hole for attachment to the support (Ø 28 mmBOQ 2012 120
  • 121. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section Extruded aluminum Pole: Cylindrical fluted, anodised by thick tin salt electro coating, U.V 1 stabilised, anti yellowing. Highly resistant to acid and toxic gas corrosion above ground Height: 3 meters 2 Pole Ø: 120 mm 3 Top: 60 mm 4 102/23 102/23 Base plate Ø: ≥ 280 mm 5 Door opening: Made of die-cast inspection window, with protective fuse holder 6 2x16A fuses, 4-pole removable terminal block, and 16 mm sections Ø 20 mm With four numbers bolts 7 Insulation class: I / II 8 Hint: RAL colour shall be as per W .D... engr. approval as well as the accessories Extruded aluminum Pole: Cylindrical fluted, anodised by thick tin salt electro coating, U.V 1 stabilised, anti yellowing. Highly resistant to acid and toxic gas corrosion Height: 4 meters 2 Pole Ø: 120 mm 3 Top: 60 mm 4 103/23 103/23 Base plate Ø: ≥ 280 mm 5 Door opening: Made of die-cast inspection window, with protective fuse holder 6 2x16A fuses, 4-pole removable terminal block, and 16 mm sections Ø 20 mm With four numbers bolts 7 Insulation class: I / II 8 Hint: RAL colour shall be as per W .D... engr. approval as well as the accessories Extruded aluminum Pole: Cylindrical fluted, anodised by thick tin salt electro coating, U.V 1 stabilised, anti yellowing. Highly resistant to acid and toxic gas corrosion Height: 5 meters 2 Pole Ø: 120 mm 3 Top: 60 mm 4 104/23 104/23 Base plate Ø: ≥ 280 mm 5 Door opening: Made of die-cast inspection window, with protective fuse holder 6 2x16A fuses, 4-pole removable terminal block, and 16 mm sections Ø 20 mm With four numbers bolts 7 Insulation class: I / II 8 Hint: RAL colour shall be as per W .D... engr. approval as well as the accessoriesBOQ 2012 121
  • 122. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section Steel Pole: Round tapered shaft (made of galvanized, seamless steel) with 800mm 1 anchorage section (part of shaft) to go under ground in concrete foundation under ground Height: 3.5 meters (above ground) + 800mm 2 Top: 60 mm 3 Bottom: 115 mm 4 105/23 105/23 weight: 35 Kg. as a minimum 5 Door opening: Access door and equipped with mantle terminal for connection to 6 and PE connection in accordance with DIN 49778 Regulations: Dimensions and tensile strengths meet the requirements of 7 European standards DIN EN 40 Connection Box Housing: 1 Pole Ø: ≥ 110 mm dia 2 Fuses: 2 Neazed 16 A 3 Inputs: 2 Nos. 5 x 16mm2 4 106/23 106/23 Outputs: 2Nos. 3 x 2.5mm2 5 Ingress protection: IP 54 as a minimum 6 Insulation class: II 7 Regulations: Tested according to DIN 43628 / VDE 0660 8 Part 505 Hint: All requirements of ADWEA to be fulfilled if required Connection Box Housing: Made of weatherproof galvanized steel 1 107/23 107/23 : 2 Nos. 10A 2 Inputs: 2 Nos. brass glands for incoming cable up to 4x16mm2 3 Outputs: 2 Nos. plastic glands for outgoing flexible up to 3x2.5mm2 4BOQ 2012 122
  • 123. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section Body : Flame retardant ABS Diffuser : Clear/Opal Polycarbonate Mounting : Surface Input Voltage: 240V, 50Hz Duration: 3 hr 1/24 1/24 Battery : 3.6V, 3Ah high temperature nickel cadmium Charger : Constant current Charging Monitor: Red LED Operation Mode: Non-Maintained Recharge Period : 24 Hr Lamp: T5-8Watt Body : (Maintained).Flame retardant ABS Diffuser : Clear/Opal Polycarbonate Mounting : Surface Input Voltage: 240V, 50Hz 2/24 2/24 Duration: 3 hr Battery : 3.6V, 3Ah high temperature nickel cadmium Charger : Constant current Charging Monitor: Red LED Operation Mode: Non-Maintained Recharge Period : 24 Hr Body : Flame retardant ABS Diffuser : Clear/Opal Polycarbonate Mounting : Surface Input Voltage: 240V, 50Hz 3/24 3/24 Duration: 3 hr Battery : 3.6V, 3Ah high temperature nickel cadmium Charger : Constant current Charging Monitor: Red LED Operation Mode: Non-Maintained Recharge Period : 24 HrBOQ 2012 123
  • 124. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section Body : (Maintained) Flame retardant ABS Diffuser : Clear/Opal Polycarbonate Mounting : Surface Input Voltage: 240V, 50Hz 4/24 4/24 Duration: 3 hr Battery : 3.6V, 3Ah high temperature nickel cadmium Charger : Constant current Charging Monitor: Red LED Operation Mode: Non-Maintained Recharge Period : 24 Hr Body : Flame retardant ABS Diffuser : Clear/Opal Polycarbonate Mounting : Surface or Semi-recessed to 40mm depth Input Voltage: 240V, 50Hz 5/24 5/24 Duration: 3 hr Battery : 3.6V, 3Ah high temperature nickel cadmium Charger : Constant current Charging Monitor: Red LED Operation Mode: Non-Maintained Recharge Period : 24 Hr Body : (Exit Legend) Flame retardant ABS Diffuser : Clear/Opal Polycarbonate Mounting : Surface or Semi-recessed to 40mm depth Input Voltage: 240V, 50Hz 6/24 6/24 Duration: 3 hr Battery : 3.6V, 3Ah high temperature nickel cadmium Charger : Constant current Charging Monitor: Red LED Operation Mode: Non-Maintained Recharge Period : 24 HrBOQ 2012 124
  • 125. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section Body : (Cast Aluminum). Flame retardant ABS Diffuser : Clear/Opal Polycarbonate Mounting : Surface Input Voltage: 240V, 50Hz 7/24 7/24 Duration: 3 hr Battery : 3.6V, 3Ah high temperature nickel cadmium Charger : Constant current Charging Monitor: Red LED Operation Mode: Non-Maintained Recharge Period : 24 Hr Body : (Maintained). Flame retardant ABS Diffuser : Clear/Opal Polycarbonate Mounting : Surface Input Voltage: 240V, 50Hz 8/24 8/24 Duration: 3 hr Battery : 3.6V, 3Ah high temperature nickel cadmium Charger : Constant current Charging Monitor: Red LED Operation Mode: Non-Maintained Recharge Period : 24 Hr Body : Flame retardant with ABS end caps and extruded aluminum sides rails Diffuser : Clear/Opal Polycarbonate Mounting : Surface Input Voltage: 240V, 50Hz 9/24 9/24 Duration: 3 hr Battery : 3.6V, 3Ah high temperature nickel cadmium Charger : Constant current Charging Monitor: Red LED Operation Mode: Non-Maintained Recharge Period : 24 HrBOQ 2012 125
  • 126. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section Body : (Maintained) . Flame retardant with ABS end caps and extruded aluminum sides rails Diffuser : Clear/Opal Polycarbonate Mounting : Surface 10/24 10/24 Input Voltage: 240V, 50Hz Duration: 3 hr Battery : 3.6V, 3Ah high temperature nickel cadmium Charger : Constant current Charging Monitor: Red LED Operation Mode: Non-Maintained Body : (Exit Legend). Flame retardant with ABS end caps and extruded aluminum sides rails Diffuser : Clear/Opal Polycarbonate Mounting : Surface 11/24 11/24 Input Voltage: 240V, 50Hz Duration: 3 hr Battery : 3.6V, 3Ah high temperature nickel cadmium Charger : Constant current Charging Monitor: Red LED Operation Mode: Non-Maintained Body : (Double Sided). Flame retardant with ABS end caps and extruded aluminum sides rails Diffuser : Clear/Opal Polycarbonate Mounting : Surface 12/24 12/24 Input Voltage: 240V, 50Hz Duration: 3 hr Battery : 3.6V, 3Ah high temperature nickel cadmium Charger : Constant current Charging Monitor: Red LED Operation Mode: Non-MaintainedBOQ 2012 126
  • 127. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section Body : White powder coated/brass finished sheet steel with slide in flame retardant opalescent polycarbonate legend panel and down light panel Diffuser : Clear/Opal Polycarbonate Mounting : Surface 13/24 13/24 Input Voltage: 240V, 50Hz Duration: 3 hr Battery : 3.6V, 3Ah high temperature nickel cadmium Charger : Constant current Charging Monitor: Red LED Operation Mode: Non-Maintained Body : (Maintained) White powder coated/brass finished sheet steel with slide in flame retardant opalescent polycarbonate legend panel and down light panel Diffuser : Clear/Opal Polycarbonate Mounting : Surface 14/24 14/24 Input Voltage: 240V, 50Hz Duration: 3 hr Battery : 3.6V, 3Ah high temperature nickel cadmium Charger : Constant current Charging Monitor: Red LED Operation Mode: Non-Maintained Body : White powder coated/brass/chrome finished sheet steel Diffuser : Clear/Opal Polycarbonate Mounting : Recessed Input Voltage: 240V, 50Hz 15/24 15/24 Duration: 3 hr Battery : 3.6V, 3Ah high temperature nickel cadmium Charger : Constant current Charging Monitor: Red LED Operation Mode: Non-Maintained Recharge Period : 24 HrBOQ 2012 127
  • 128. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section Body :(Maintained) White powder coated/brass/chrome finished sheet steel Diffuser : Clear/Opal Polycarbonate Mounting : Recessed Input Voltage: 240V, 50Hz 16/24 16/24 Duration: 3 hr Battery : 3.6V, 3Ah high temperature nickel cadmium Charger : Constant current Charging Monitor: Red LED Operation Mode: Non-Maintained Recharge Period : 24 Hr Body : Aluminum casting housing concave reflector Diffuser : Clear/Opal Polycarbonate Mounting : Surface Input Voltage: 240V, 50Hz 17/24 17/24 Duration: 3 hr Battery : 3.6V, 3Ah high temperature nickel cadmium Charger : Constant current Charging Monitor: Red LED Operation Mode: Non-Maintained Recharge Period : 24 Hr Body : Extruded Aluminum with flame retardant ABS end caps suspended from powder coated and anodized ceiling /wall mounted assembly Diffuser : Clear/Opal Polycarbonate Mounting : Surface 18/24 18/24 Input Voltage: 240V, 50Hz Duration: 3 hr Battery : 3.6V, 3Ah high temperature nickel cadmium Charger : Constant current Charging Monitor: Red LED Operation Mode: Non-MaintainedBOQ 2012 128
  • 129. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section Body : (Maintained) Extruded Aluminum with flame retardant ABS end caps suspended from powder coated and anodized ceiling /wall mounted assembly Diffuser : Clear/Opal Polycarbonate Mounting : Surface 19/24 19/24 Input Voltage: 240V, 50Hz Duration: 3 hr Battery : 3.6V, 3Ah high temperature nickel cadmium Charger : Constant current Charging Monitor: Red LED Operation Mode: Non-Maintained Body : White stove-enameled, powder coated/lacquered trim.and anodized ceiling /wall mounted assembly Diffuser : Clear/Opal Polycarbonate Mounting : Recessed 20/24 20/24 Input Voltage: 240V, 50Hz Duration: 3 hr Battery : 3.6V, 3Ah high temperature nickel cadmium Charger : Constant current Charging Monitor: Red LED Operation Mode: Non-Maintained Conversion Kit Inverter/charger module Range of Lamps: Fluorescent: 7, 9, 18; 10W PLC; 18W T8 Battery: 3.6V, 3Ah high temperature nickel cadmium 21/24 21/24 Supply: 240V, 50Hz Charging Monitor: Red LED Standard/Approval: EN60598.2.22-ICELBOQ 2012 129
  • 130. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section Conversion Kit Inverter/charger module Range of Lamps: Fluorescent: 13, 18, 26W PLC; 18, 36W PL; 36-58W T8 Battery: 4.8V, 3Ah high temperature nickel cadmium 22/24 22/24 Supply: 240V, 50Hz Charging Monitor: Red LED Standard/Approval: EN60598.2.22-ICEL Conversion Kit Inverter/charger module Range of Lamps: Fluorescent: 58-70W T8 Battery: 6.0V, 3Ah high temperature nickel cadmium 23/24 23/24 Supply: 240V, 50Hz Charging Monitor: Red LED Standard/Approval: EN60598.2.22-ICEL 8 Inverter/charger module 24/24 24/24 EN60598.2.22 to 58W 3.6V/3AH High-temperature Ni-Cd battery 25/24 25/24 4.8V/3AH High-temperature Ni-Cd battery 26/24 26/24 6.0V/3AH High-temperature Ni-Cd battery 27/24 27/24 Frosted/Clear 15-100W incandescent lamp, E27 1/25 1/25 150W E27 Frosted/Clear incandescent lamp, E27 2/25 2/25 Frosted /Clear 15-40W incandescent lamp, E14 3/25 3/25 150W spot incandescent lamp with reflector, E14/E27 25 4/25 4/25 40W Focused Light Beam Lamp, E14/E27/B22d 30 5/25 5/25 150W 75 Focused Light Beam Lamp, E14/E27/B22d 30 6/25 6/25 E27 120W, 12 -30 , reflector incandescent, E27 60 7/25 7/25 80W 12 -30 , reflector incandescent, E27 60 8/25 8/25 Colored, E27 80W Colored Reflector Lamp, E14/E27 25 9/25 9/25 150W halogen lamp, E27, 48mm dia 60 10/25 10/25 250W halogen lamp, E27, 32mm dia 60 11/25 11/25 B15d 250W halogen lamp, E27, 32mm dia 60 12/25 12/25 18mm dia 60W, tubular clear/frosted halogen lamp, E14 40 13/25 13/25 60W, tubular clear/frosted halogen lamp, E14 40 14/25 14/25 pyramid/Crystal candle clearBOQ 2012 130
  • 131. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section 75W, aluminum reflector halogen lamp, E27 50 15/25 15/25 dichroic 75W, aluminum reflector halogen lamp, E27 50 16/25 16/25 reflector 100W halogen lamp, R7s 60 17/25 17/25 150/300W halogen lamp, R7s 60 18/25 18/25 200/300W halogen lamp, R7s 60 19/25 19/25 500W halogen lamp, R7s 60 20/25 20/25 750W halogen lamp, R7s 60 21/25 21/25 1000W halogen lamp, R7s 60 22/25 22/25 2000W W halogen lamp, R7s 60 23/25 23/25 5-90W, 12V halogen lamp, GY6.35, G4, U.V. Reducing Quartz 24/25 24/25 halogen lamp, Reducing Quartz 5 25/25 25/25 50W, 12V halogen lamp, GY6.35 35 90W, 12V halogen lamp, GY6.35 75 26/25 26/25 100W, 24V, GY6.35/G4 20 27/25 27/25 150W, 24V, GY6.35 28/25 28/25 20W, 12V halogen lamp, GY4, 48mm dia 29/25 29/25 24W, 12V halogen lamp, GY4, 48mm dia 30/25 30/25 20 halogen lamp, GY4, 48mm dia 31/25 31/25 50W, 12V halogen lamp, BA15d, 70mm dia 35 halogen lamp, GY4, 48mm dia 32/25 32/25 50W, 6/12V halogen lamp, G53, 111mm dia 75 halogen lamp, GY4, 48mm dia 33/25 33/25 100W, 12V 50W, 12V halogen lamp, GU5.3, 51mm dia 20 34/25 34/25 Titan Reflector Titan halogen lamp, GU5.3, 51mm dia 20 35/25 35/25 50W, 12V With aluminum coated reflector 20 Reflector Titan halogen lamp, GU5.3, 51mm dia 20 36/25 36/25 Without DECO cover Reflector Titan halogen lamp, GU5.3, 51mm dia 20 37/25 37/25 35W, GU4, 35.3mm dia 20 Without DECO cover Reflector 50W, 12V halogen lamp, GU5.3, 51mm dia 20 38/25 38/25 With DECO cover Titan Reflector Titan halogen lamp, GU5.3, 51mm dia 5 20 39/25 39/25 35W, with front glass, GU4 10 With DECO cover ReflectorBOQ 2012 131
  • 132. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section Compact Fluorescent Lamp 3/5/7/11 240V/50Hz, long life energy saver compact fluorescent lamp with 40/25 40/25 integrated electronic control gear (ECG), E14 Compact Fluorescent Lamp 240V/50Hz, long life energy saver compact fluorescent lamp with integrated 3 41/25 41/25 3/5/7/11W, E27/B22d electronic control gear Compact Fluorescent Lamp 15 240V/50Hz, long life energy saver compact fluorescent lamp with integrated 42/25 42/25 electronic control gear (ECG), E14 Compact Fluorescent Lamp 240V/50Hz, long life energy saver compact fluorescent lamp with 20/23W 43/25 43/25 integrated electronic control gear (ECG), E14 Compact Fluorescent Lamp 8/12 240V/50Hz, energy saver compact fluorescent lamp with (ECG), E14 44/25 44/25 E27/B22d Compact Fluorescent Lamp 240V/50Hz, energy saver compact fluorescent lamp with (ECG), E14/ E27/B22d 45/25 45/25 16/21W Compact Fluorescent Lamp 15/20 240V/50Hz, long life high quality decorative globe energy saver compact 46/25 46/25 fluorescent lamp with (ECG), E27/B22d Compact Fluorescent Lamp 15/20 240V/50Hz, high quality electronic energy saver compact fluorescent 47/25 47/25 lamp with combined reflector, E27 Compact Fluorescent Lamp 23 240V/50Hz, electronic, energy saver compact fluorescent lamp with built-in 48/25 48/25 variation, E27 Compact Fluorescent Lamp 15 240V/50Hz, electronic, energy saver compact fluorescent lamp with light 49/25 49/25 sensor, E27/B22d Compact Fluorescent Lamp 13W, super compact single-ended compact fluorescent lamp for conventional 50/25 50/25 control gear (CCG), GX24d-1BOQ 2012 132
  • 133. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section Compact Fluorescent Lamp super compact single-ended compact fluorescent lamp for conventional control 51/25 51/25 18W, GX24d-2 gear Compact Fluorescent Lamp super compact single-ended compact fluorescent lamp for conventional control 52/25 52/25 26W, GX24d-3 gear Compact Fluorescent Lamp super compact single-ended compact fluorescent lamp for conventional control 53/25 53/25 For electronic control gear ECG, GX24d-1 gear , Compact Fluorescent Lamp super compact single-ended compact fluorescent lamp for conventional control 54/25 54/25 18W, GX24q-2 gear -1 Compact Fluorescent Lamp super compact single-ended compact fluorescent lamp for conventional control 55/25 55/25 26W, GX24q-3 gear Compact Fluorescent Lamp super compact single-ended compact fluorescent lamp for conventional control 56/25 56/25 32W, GX24q-4 gear (CCG), Compact Fluorescent Lamp 13W, super compact single-ended compact fluorescent lamp for conventional 57/25 57/25 42W, GX24q-4 control gear (CCG), Compact Fluorescent Lamp compact fluorescent lamp for (CCG), with integral starter and RF suppression 58/25 58/25 capacitor, G24d-1 Compact Fluorescent Lamp . compact fluorescent lamp for (CCG), with integral starter and RF 18W, G24d-2 59/25 59/25 suppression capacitor, G24d-1 Compact Fluorescent Lamp compact fluorescent lamp for (CCG), with integral starter and RF 26W, G24d-3 60/25 60/25 suppression capacitor Compact Fluorescent Lamp 10/13W compact fluorescent lamp for (CCG), with integral starter and RF 61/25 61/25 For electronic control gear (ECG), G24q-1 suppression capacitor, G24d-1 base Compact Fluorescent Lamp compact fluorescent lamp for (CCG), with integral starter and RF suppression 62/25 62/25 18W, G24q-2 capacitor, G24d-1.BOQ 2012 133
  • 134. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section Compact Fluorescent Lamp 26W compact fluorescent lamp for (CCG), with integral starter and RF suppression 63/25 63/25 For electronic control gear (ECG), G24q-1 base capacitor, G24d-1 26W, G24q-3 Compact Fluorescent Lamp 5/7W compact fluorescent lamp for (CCG), with integral starter and RF 64/25 64/25 suppression capacitor, G23 Compact Fluorescent Lamp compact fluorescent lamp for (CCG), with integral starter and RF suppression 65/25 65/25 capacitor, G23 9/11W, G23 Compact Fluorescent Lamp compact fluorescent lamp for (CCG), with integral starter and RF suppression 66/25 66/25 capacitor, G23 9W, Colored G23 Compact Fluorescent Lamp 5/7W compact fluorescent lamp for (CCG), with integral starter and RF 67/25 67/25 For electronic control gear (ECG), G23 base suppression capacitor, G23 Compact Fluorescent Lamp compact fluorescent lamp for (CCG), with integral starter and RF suppression 68/25 68/25 9/11W For electronic control gear (ECG), G23 base capacitor, G23 G23 Compact Fluorescent Lamp 18W, compact fluorescent lamp, 2G11 69/25 69/25 Compact Fluorescent Lamp 70/25 70/25 24W, 2G11 compact fluorescent lamp, 2G11 Compact Fluorescent Lamp 71/25 71/25 36W, 2G11 compact fluorescent lamp, 2G11. Compact Fluorescent Lamp compact fluorescent lamp, 2G11. (40/55W, 2G11, for modular 600 mm 72/25 72/25 luminaires Compact Fluorescent Lamp 73/25 73/25 80W, 2G11 compact fluorescent lamp, 2G11. Compact Fluorescent Lamp 18/24W, compact fluorescent lamp, 2G10 74/25 74/25 Compact Fluorescent Lamp 75/25 75/25 36W, 2G10 18/24W, compact fluorescent lamp, 2G10 76/25 76/25BOQ 2012 134
  • 135. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section Tubular Fluorescent Lamp ECG 21W, 16mm diameter, extremely high luminous tubular fluorescent lamp for 77/25 77/25 operation, G5 Tubular Fluorescent Lamp ECG 28W, 16mm diameter, extremely high luminous tubular fluorescent lamp for 78/25 78/25 operation, G5 Tubular Fluorescent Lamp ECG 35W, 16mm diameter, extremely high luminous tubular fluorescent lamp for 79/25 79/25 operation, G5 Tubular Fluorescent lamp 24W, 16mm diameter, high efficient tubular fluorescent lamp for (ECG) operation 80/25 80/25 G5 Tubular Fluorescent lamp 39W, 16mm diameter, high efficient tubular fluorescent lamp for (ECG) operation 81/25 81/25 G5 Tubular Fluorescent lamp . 16mm diameter, high efficient tubular fluorescent lamp for (ECG) operation 49W 82/25 82/25 G5 Tubular Fluorescent lamp 54W, 16mm diameter, high efficient tubular fluorescent lamp for (ECG) operation 83/25 83/25 G5 Tubular Fluorescent lamp 80W, 16mm diameter, high efficient tubular fluorescent lamp for (ECG) operation 84/25 84/25 G5 Tubular Fluorescent Lamp 4/6W, 16mm diameter, tubular fluorescent lamp, G5 85/25 85/25 Tubular Fluorescent Lamp 8/13W, G5 16mm diameter, tubular fluorescent lamp, G5. 86/25 86/25 Circular Fluorescent Lamp 22W, 16mm diameter, circular fluorescent lamp for (ECG) operation, 2GX13 87/25 87/25 Circular Fluorescent Lamp 40W, 16mm diameter, circular fluorescent lamp for (ECG) operation, 2GX13 88/25 88/25 Circular Fluorescent Lamp 55W, 16mm diameter, circular fluorescent lamp for (ECG) operation, 2GX13 89/25 89/25BOQ 2012 135
  • 136. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section Tubular Fluorescent Lamp 18W, 26mm diameter, tubular fluorescent lamp for (CCG) & (ECG) operation with 90/25 90/25 low loss of luminous flux, G13 Tubular Fluorescent Lamp 36W, 26mm diameter, tubular fluorescent lamp for (CCG) & (ECG) operation with 91/25 91/25 low loss of luminous Tubular Fluorescent Lamp 58W, 26mm diameter, tubular fluorescent lamp for (CCG) & (ECG) operation with 92/25 92/25 low loss of luminous flux, G13 Tubular Fluorescent Lamp 18W, 26mm diameter, tubular fluorescent lamp for (CCG) operation, G13 93/25 93/25 Tubular Fluorescent Lamp 26mm diameter, tubular fluorescent lamp for (CCG) operation, G13,36W 94/25 94/25 Tubular Fluorescent Lamp 58W 26mm diameter, tubular fluorescent lamp for (CCG) operation, G13. 95/25 95/25 Tubular Fluorescent Lamp 30/36/58W, 26mm diameter, tubular fluorescent lamp for (CCG) operation with 96/25 96/25 special colour appearance, G13 U-shaped Fluorescent Lamp ECG 6/11/13W/730-760, 7mm diameter, U-shaped fluorescent lamp for 97/25 97/25 operation, 2G13 base Tubular Fluorescent Lamp 20W/252-305, 38mm diameter, tubular fluorescent lamp for (CCG) operation, G13 98/25 98/25 base Tubular Fluorescent Lamp 40W/252-305, 38mm diameter, tubular fluorescent lamp for (CCG) operation, G13 99/25 99/25 base Tubular Fluorescent Lamp 65W/252-305, 38mm diameter, tubular fluorescent lamp for (CCG) operation, G13 100/25 100/25 baseBOQ 2012 136
  • 137. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section Tubular Fluorescent Lamp 20W, 38mm diameter, tubular fluorescent lamp for (CCG) operation for explosion 101/25 101/25 proof luminaires, Fa6 base Tubular Fluorescent Lamp 40W, 38mm diameter, tubular fluorescent lamp for (CCG) operation for explosion 102/25 102/25 proof luminaires, Fa6 base Tubular Fluorescent Lamp 65W, 38mm diameter, tubular fluorescent lamp for (CCG) operation for explosion 103/25 103/25 proof luminaires, Fa6 base Metal Halide Lamp 73/75W, tubular, UV-reduced, double-ended metal halide lamp with quartz 104/25 104/25 discharge tube, RX7s base Metal Halide Lamp 73/75W, tubular, UV-reduced, double-ended metal halide lamp with quartz 105/25 105/25 discharge tube, (150W, RX7s-24). base Metal Halide Lamp ., tubular, UV-reduced, double-ended metal halide lamp with quartz 250W, Fc2 106/25 106/25 discharge tube, RX7s base Metal Halide Lamp ., tubular, UV-reduced, double-ended metal halide lamp 400W, not UV-reduced 107/25 107/25 with quartz discharge tube, RX7s base Metal Halide Lamp 1000W, tubular, double-ended metal halide lamp without outer bulb, cable 108/25 108/25 connection Metal Halide Lamp 1950W, tubular, double-ended metal halide lamp without outer bulb, cable 109/25 109/25 connection Metal Halide Lamp 2100W, tubular, double-ended metal halide lamp without outer bulb, cable 110/25 110/25 connectionBOQ 2012 137
  • 138. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section Metal Halide Lamp 39/72W, tubular, UV-reduced, single-ended metal halide lamp with ceramic 111/25 111/25 discharge tube, G8.5 base Metal Halide Lamp 39/72W G12 base, tubular, UV-reduced, single-ended metal halide lamp with 112/25 112/25 ceramic discharge tube, G8.5 base Metal Halide Lamp ., tubular, UV-reduced, single-ended metal halide lamp with ceramic 147W 113/25 113/25 discharge tube, G8.5 base Metal Halide Lamp , tubular, UV-reduced, single-ended metal halide lamp with 75W, with quartz tube 114/25 114/25 ceramic discharge tube, G8.5 base Metal Halide Lamp 150W, tubular, UV-reduced, single-ended metal halide lamp with ceramic 115/25 115/25 discharge tube, G8.5 base Metal Halide Lamp 250W, elliptical, UV-reduced, single-ended metal halide lamp with ceramic 116/25 116/25 discharge tube, E40 base. For enclosed luminaries Metal Halide Lamp 420W, elliptical, UV-reduced, single-ended metal halide lamp with ceramic 117/25 117/25 discharge tube, E40 base. For enclosed luminaries Metal Halide Lamp 1000W, elliptical, UV-reduced, single-ended metal halide lamp with ceramic 118/25 118/25 discharge tube, E40 base. For enclosed luminaries Metal Halide Lamp 2000W, elliptical, UV-reduced, single-ended metal halide lamp with ceramic 119/25 119/25 discharge tube, E40 base. For enclosed luminaries Metal Halide Lamp 2000W, elliptical, UV-reduced, single-ended metal halide lamp with ceramic 120/25 120/25 discharge tube, E40 base. For enclosed luminaries Metal Halide Lamp 73/100/150W, elliptical, UV-reduced, clear/coated metal halide lamp with quartz 121/25 121/25 discharge tube, E27 base. For open luminaries Metal Halide Lamp 420W, elliptical, UV-reduced, coated metal halide lamp with quartz discharge tube 122/25 122/25 E40 base. For enclosed luminariesBOQ 2012 138
  • 139. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section Metal Halide Lamp 250W, elliptical, UV-reduced, coated metal halide lamp with quartz discharge tube 123/25 123/25 E40 base. For enclosed luminaries Metal Halide Lamp 420W, elliptical, UV-reduced, coated metal halide lamp with quartz discharge tube 124/25 124/25 E40 base. For enclosed luminaries Metal Halide Lamp 1000W, elliptical, UV-reduced, coated metal halide lamp with quartz discharge 125/25 125/25 tube, E40 base. For enclosed luminaries Metal Halide Lamp 38/73W, UV-reduced, PAR reflector metal halide lamp with ceramic discharge 126/25 126/25 tube, flood/spot beams, E27 base 50/70W, elliptical, high pressure sodium lamp with/without internal igniter, E27 127/25 127/25 50/70W, elliptical, high pressure sodium lamp with/without internal igniter 128/25 128/25 50/100W,Tubular clear, E27 50/70W, elliptical, high pressure sodium lamp with/without internal 129/25 129/25 150/250W, E40 igniter, 50/70W, elliptical, high pressure sodium lamp with/without internal igniter 130/25 130/25 400/600W, E40 50/70W, elliptical, high pressure sodium lamp with/without internal igniter, (1000W 131/25 131/25 E40 50/70W, elliptical, high pressure sodium lamp with/without internal igniter,(70W 132/25 132/25 double ended RX7s) E27 50/70W, elliptical, high pressure sodium lamp with/without internal igniter,(150W 133/25 133/25 RX7s-24). E27 50/70W, elliptical, high pressure sodium lamp with/without internal 134/25 134/25 igniter,(250/400W,Fc2). E27 Up to 91W, low pressure sodium, 173lm/W, By22d 18 135/25 135/25-A 135W, low pressure sodium, 173lm/W, By22d 18 135/25 135/25-BBOQ 2012 139
  • 140. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section 185W, low pressure sodium, 173lm/W, By22d 18 135/25 135/25-C Up to 127 W, low pressure sodium, 200 lm/W, By22d 27 136/25 136/25 50W, elliptical, coated mercury lamp, E27 137/25 137/25 125W, elliptical, coated mercury lamp, E27 138/25 138/25 250W, elliptical, coated mercury lamp, E40 139/25 139/25 400W, elliptical, coated mercury lamp, E40 140/25 140/25 700W, elliptical, coated mercury lamp, E40 141/25 141/25 1000W, elliptical, coated mercury lamp, E40 142/25 142/25 160W/240V, elliptical, mercury-tungsten lamp, E27 143/25 143/25 250W/240V, elliptical, mercury-tungsten lamp, E40 144/25 144/25 500W/240V, elliptical, mercury-tungsten lamp, E40 145/25 145/25 Thermoplastic lamp holder 146/25 146/25 E 14 ISO 1481 Cover Cap cover cap E14 Thermoplastic lamp holder 147/25 147/25 Metal lamp holder 148/25 148/25 cover cap E14 PBT GF Candle lamp holder 149/25 149/25 cover 149/25 150/25 150/25 Thermoplastic lamp holder 151/25 151/25 E 27 ISO 1481 Cover Cap cover cap E27 Thermoplastic lamp holder 152/25 152/25 E 27 Porcelain lamp holder 153/25 153/25 Metal lamp holder 154/25 154/25 cover cap E27 ISO 1481 PET GF B22d lamp holder 155/25 155/25 Casing Lamp safety catch E40 , Porcelain lamp holder 156/25 156/25 Lamp Holder: G4, GZ4, G 5.3, GX 5.3,G 6.35, GY 6.35, G 53 157/25 157/25 GU4, GU5.3 B15d , BA15d lamp holder 158/25 158/25 steel Cover cap GU 10, GZ 10 lamp holder 159/25 159/25 Contact pin R7s Ceramic lamp holder 160/25 160/25 Cu, silver bulb T5, Ø16mm)) G5 lamp holder 161/25 161/25 Lamp support GX13 2 T5, Ø16mm)) G5 lamp holder 162/25 162/25 T8 , Ø 26mm & T12, Ø 38 mm G13 lamp holder 163/25 163/25BOQ 2012 140
  • 141. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section T8 , Ø 26mm & T12, Ø 38 mm G13 lamp holder 164/25 164/25 Starter attachment G13 T8 , Ø 26mm & T12, Ø 38 mm G13 lamp holder 165/25 165/25 Twin lamp holders G13 lamp holder Twin lamp holders ( T8 , Ø 26mm & T12, Ø 38 166/25 166/25 mm) With PA / PC starter holder 167/25 167/25 varies from 2.7g up to 6.4g Hint: Weight TC-D, TC-T, TC-DEL, TC-TEL G24/Gx 24 Lamp Holder 168/25 168/25 PBT GF PBT GF 2 G 7 lamp holder TC-SEL 169/25 169/25 PBT GF G 23 lamp holder TC-S 170/25 170/25 PBT GF 2G10 lamp holder TC-F 171/25 171/25 PBT GF 2G11 lamp holder TC-L 172/25 172/25 Lamp safety catch E27, Porcelain lamp holder 173/25 173/25 Lamp safety catch E40, Porcelain lamp holder 174/25 174/25 Cu Contact pin Ceramic Rx7s 175/25 175/25 silver bulb Ni Contact Ceramic Fc2 lamp holder 176/25 176/25 Starter Housing: Self-extinguishing insulated housing made of Markrolon Insulation class: II Compensating capacitor: Foil wound capacitor 177/25 177/25 Approval marks: VDE, and carry the ENEC mark Main voltage: 240 Volts Wattage: 4 watt up to 80 watt Starter Housing: Self-extinguishing insulated housing made of Markrolon Insulation class: II Compensating capacitor: Foil wound capacitor 178/25 178/25 Approval marks: VDE, and carry the ENEC mark Main voltage: 240 Volts Wattage: 100 watt up to 140 wattBOQ 2012 141
  • 142. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section Starter Housing: Self-extinguishing insulated housing made of Markrolon Insulation class: II Compensating capacitor: Foil wound capacitor 179/25 179/25 Approval marks: VDE, and carry the ENEC mark Wattage: 15 watt up to 32 watt Safety starter Main voltage: 240 Volts Starter Housing: Self-extinguishing insulated housing made of Markrolon Insulation class: II Compensating capacitor: Foil wound capacitor 180/25 180/25 Approval marks: VDE, and carry the ENEC mark Main voltage: 240 Volts Wattage: 30 watt up to 65 watt.t Safety starter EEI = B2 as a minimum Low power consumption Slim cross-section and compact Low loss core lamination Low magnetic stray field tw =130 Long service life 181/25 181/25 Vacuum impregnation Non-audible noise level Supply voltage: 240 volts as a minimum Performance requirement: To IEC 60921 Insulation class: H +200 Approval marks: Carry the ENEC and kite marks and certified to ISO 9001/9002BOQ 2012 142
  • 143. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section ECG for T8 / Ø 26mm Supply voltage: 240 volts as a minimum / 50 HZ Permitted supply voltage: 198 V up to 264 V Lamp start: Within 2 s Preheating Approval marks: ENEC 10 and VDE Luminous flux: Same at AC or DC operation Mains harmonics: Acc. to EN 61000 - 3-2 182/25 182/25 RFI suppression: Acc. to EN 55015 Immunity: Acc. to EN 61547 Suitable for: Emergency lighting systems acc. to DIN VDE 0108 Over voltage protection: To DIN VDE 160 EOL Safety: Safe shut down of lamps in the event of a defect or at Operating freq: 45 up to 60 KHZ ECG for T8 / Ø 26mm Supply voltage: 240 volts as a minimum / 50 HZ Permitted supply voltage: 198 V up to 264 V Lamp start: Within 2 s Preheating Approval marks: ENEC 10 and VDE Luminous flux: Same at AC or DC operation Mains harmonics: Acc. to EN 61000 - 3-2 183/25 183/25 RFI suppression: Acc. to EN 55015 Immunity: Acc. to EN 61547 Suitable for: Emergency lighting systems acc. to DIN VDE 0108 Over voltage protection: To DIN VDE 160 Safety: Safe shut down of lamps in the event of a defect or at EOL Operating freq: 30 up to 50 KHZ ECG for T8 / Ø 26mm Supply voltage:240 volts as a minimum / 50 HZ Permitted supply voltage: 198 V up to 264 V Lamp start: Within 2 s Preheating Approval marks: ENEC 10 and VDE Luminous flux: Same at AC or DC operation Mains harmonics: Acc. to EN 61000 - 3-2 184/25 184/25 RFI suppression: Acc. to EN 55015 Immunity: Acc. to EN 61547 Suitable for: Emergency lighting systems acc. to DIN VDE 0108 Over voltage protection: To DIN VDE 160 Safety: Safe shut down of lamps in the event of a defect or at EOL Operating freq: 43 KHZBOQ 2012 143
  • 144. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section ECG for T8 / Ø 26mm 50 HZ Supply voltage: 240 volts as a minimum / Permitted supply voltage: 198 V up to 264 V Lamp start: Within 0.3 s (Instant / Cold Approval marks: ENEC 10 and VDE Luminous flux: Same at AC or DC operation Mains harmonics: Acc. to EN 61000 - 3-2 185/25 185/25 RFI suppression: Acc. to EN 55015 Immunity: Acc. to EN 61547 Suitable for: Emergency lighting systems acc. to DIN VDE 0108 Over voltage protection: To DIN VDE 160 EOL Safety: Safe shut down of lamps in the event of a defect or at Operating freq: 40 KHZ ECG for T8 / Ø 26mm 50 HZ Supply voltage: 240 volts as a minimum / Permitted supply voltage: 198 V up to 264 V Lamp start: Within 0.3 s (Instant / Cold Approval marks: ENEC 10 and VDE Luminous flux: Same at AC or DC operation Mains harmonics: Acc. to EN 61000 - 3-2 186/25 186/25 RFI suppression: Acc. to EN 55015 Immunity: Acc. to EN 61547 Suitable for: Emergency lighting systems acc. to DIN VDE 0108 Over voltage protection: To DIN VDE 160 EOL Safety: Safe shut down of lamps in the event of a defect or at Operating freq: 40 KHZ ECG for T8 / Ø 26mm 50 HZ Supply voltage: 240 volts as a minimum / Permitted supply voltage: 198 V up to 264 V Preheating Lamp start: Within 2 s Approval marks: ENEC 10 and VDE Luminous flux: Same at AC or DC operation Mains harmonics: Acc. to EN 61000 - 3-2 187/25 187/25 RFI suppression: Acc. to EN 55015 Immunity: Acc. to EN 61547 Suitable for: Emergency lighting systems acc. to DIN VDE 0108 Over voltage protection: To DIN VDE 160 EOL Safety: Safe shut down of lamps in the event of a defect or at Operating freq: 45 up to 60 KHZBOQ 2012 144
  • 145. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section ECG for T8 / Ø 26mm 50 HZ Supply voltage: 240 volts as a minimum / Permitted supply voltage: 198 V up to 264 V Preheating Lamp start: Within 2 s Approval marks: ENEC 10 and VDE Luminous flux: Same at AC or DC operation Mains harmonics: Acc. to EN 61000 - 3-2 188/25 188/25 RFI suppression: Acc. to EN 55015 Immunity: Acc. to EN 61547 Suitable for: Emergency lighting systems acc. to DIN VDE 0108 Over voltage protection: To DIN VDE 160 EOL Safety: Safe shut down of lamps in the event of a defect or at Operating freq: 43 KHZ ECG for T5 / Ø 16mm 50 HZ Supply voltage: 240 volts as a minimum / Permitted supply voltage: 198 v up to 254 v preheating Lamp start: Within 1 s Approval marks: ENEC 10 and VDE Luminous flux: Same at AC or DC operation Mains harmonics: Acc. to EN 61000 - 3-2 189/25 189/25 RFI suppression: Acc. to EN 55015 Immunity: Acc. to EN 61547 Suitable for: Emergency lighting systems acc. to DIN VDE 0108 Over voltage protection: To DIN VDE 160 EOL Safety: Safe shut down of lamps in the event of a defect or at Operating freq: Approx. 45 up to 50 KHZ ECG for T5 / Ø 16mm 50 HZ Supply voltage: 240 volts as a minimum / Permitted supply voltage: 198 v up to 254 v preheating Lamp start: Within 1 s Approval marks: ENEC 10 and VDE Luminous flux: Same at AC or DC operation Mains harmonics: Acc. to EN 61000 - 3-2 190/25 190/25 RFI suppression: Acc. to EN 55015 Immunity: Acc. to EN 61547 Suitable for: Emergency lighting systems acc. to DIN VDE 0108 Over voltage protection: To DIN VDE 160 EOL Safety: Safe shut down of lamps in the event of a defect or at Operating freq: Approx. 45 up to 50 KHZBOQ 2012 145
  • 146. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section ECG for T5 / Ø 16mm 50 HZ Supply voltage: 240 volts as a minimum / Permitted supply voltage: 198 v up to 254 v preheating Lamp start: Within 1 s Approval marks: ENEC 10 and VDE Luminous flux: Same at AC or DC operation Mains harmonics: Acc. to EN 61000 - 3-2 191/25 191/25 RFI suppression: Acc. to EN 55015 Immunity: Acc. to EN 61547 Suitable for: Emergency lighting systems acc. to DIN VDE 0108 Over voltage protection: To DIN VDE 160 EOL Safety: Safe shut down of lamps in the event of a defect or at Operating freq: Approx. 45 up to 50 KHZ ECG for T5 / Ø 16mm 50 HZ Supply voltage: 240 volts as a minimum / Permitted supply voltage: 198 v up to 254 v preheating Lamp start: Within 1 s Approval marks: ENEC 10 and VDE Luminous flux: Same at AC or DC operation Mains harmonics: Acc. to EN 61000 - 3-2 192/25 192/25 RFI suppression: Acc. to EN 55015 Immunity: Acc. to EN 61547 Suitable for: Emergency lighting systems acc. to DIN VDE 0108 Over voltage protection: To DIN VDE 160 EOL Safety: Safe shut down of lamps in the event of a defect or at Operating freq: Approx. 45 up to 50 KHZ ECG for T5 / Ø 16mm Dimmable from: 1 % up to 100 % luminous flux Supply voltage: 240 volts as a minimum /50 HZ Permitted supply voltage: Low voltage 1 up to 10 V and 198 v up to 264 v preheating Lamp start: Within 0.5 s Approval marks: ENEC 10 and VDE Luminous flux: Same at AC or DC operation 193/25 193/25 Mains harmonics: Acc. to EN 61000 - 3-2 RFI suppression: Acc. to EN 55015 Immunity: Acc. to EN 61547 Suitable for: Emergency lighting systems acc. to DIN VDE 0108 Over voltage protection: To DIN VDE 160 EOL Safety: Safe shut down of lamps in the event of a defect or atBOQ 2012 146
  • 147. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section ECG for T5 / Ø 16mm 50 HZ Supply voltage: 240 volts as a minimum / Permitted supply voltage: 198 v up to 264 v preheating Lamp start: Within 0.5 s Approval marks: ENEC 10 and VDE Luminous flux: Same at AC or DC operation Mains harmonics: Acc. to EN 61000 - 3-2 194/25 194/25 RFI suppression: Acc. to EN 55015 Immunity: Acc. to EN 61547 Suitable for: Emergency lighting systems acc. to DIN VDE 0108 Over voltage protection: To DIN VDE 160 EOL Safety: Safe shut down of lamps in the event of a defect or at Operating freq: Approx. 40 up to 70 KHZ ECG for T5 / Ø 16mm 50 HZ Supply voltage: 240 volts as a minimum / Permitted supply voltage: 198 v up to 264 v Lamp start: Within 0.5 s preheating Approval marks: ENEC 10 and VDE Luminous flux: Same at AC or DC operation Mains harmonics: Acc. to EN 61000 - 3-2 195/25 195/25 RFI suppression: Acc. to EN 55015 Immunity: Acc. to EN 61547 Suitable for: Emergency lighting systems acc. to DIN VDE 0108 Over voltage protection: To DIN VDE 160 EOL Safety: Safe shut down of lamps in the event of a defect or at Operating freq: Approx. 40 up to 70 KHZ ECG for T5 / Ø 16mm 50 HZ Supply voltage: 240 volts as a minimum / Permitted supply voltage: 198 v up to 254 v Lamp start: Within 0.5 s preheating Approval marks: ENEC 10 and VDE Luminous flux: Same at AC or DC operation Mains harmonics: Acc. to EN 61000 - 3-2 196/25 196/25 RFI suppression: Acc. to EN 55015 Immunity: Acc. to EN 61547 Suitable for: Emergency lighting systems acc. to DIN VDE 0108 Over voltage protection: To DIN VDE 160 EOL Safety: Safe shut down of lamps in the event of a defect or at Operating freq: Approx. 40 up to 70 KHZBOQ 2012 147
  • 148. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section ECG for T5 / Ø 16mm 50 HZ Supply voltage: 240 volts as a minimum / Permitted supply voltage: 198 v up to 264 v Lamp start: Within 0.5 s preheating Approval marks: ENEC 10 and VDE Luminous flux: Same at AC or DC operation Mains harmonics: Acc. to EN 61000 - 3-2 197/25 197/25 RFI suppression: Acc. to EN 55015 Immunity: Acc. to EN 61547 Suitable for: Emergency lighting systems acc. to DIN VDE 0108 Over voltage protection: To DIN VDE 160 EOL Safety: Safe shut down of lamps in the event of a defect or at Operating freq: Approx. 40 up to 70 KHZ ECG for T5 / Ø 16mm 50 HZ Supply voltage: 240 volts as a minimum / Permitted supply voltage: 198 v up to 264 v Lamp start: Within 0.5 s preheating Approval marks: ENEC 10 and VDE Luminous flux: Same at AC or DC operation Mains harmonics: Acc. to EN 61000 - 3-2 198/25 198/25 RFI suppression: Acc. to EN 55015 Immunity: Acc. to EN 61547 Suitable for: Emergency lighting systems acc. to DIN VDE 0108 Over voltage protection: To DIN VDE 160 EOL Safety: Safe shut down of lamps in the event of a defect or at Operating freq: Approx. 40 up to 70 KHZ ECG for T5 / Ø 16mm 50 HZ Supply voltage: 240 volts as a minimum / Permitted supply voltage: 198 v up to 264 v preheating Lamp start: Within 0.5 s Approval marks: ENEC 10 and VDE Luminous flux: Same at AC or DC operation Mains harmonics: Acc. to EN 61000 - 3-2 199/25 199/25 RFI suppression: Acc. to EN 55015 Immunity: Acc. to EN 61547 Suitable for: Emergency lighting systems acc. to DIN VDE 0108 Over voltage protection: To DIN VDE 160 EOL Safety: Safe shut down of lamps in the event of a defect or at Operating freq.: 40 up to 70 KHZBOQ 2012 148
  • 149. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section ECG for T5 / Ø 16mm 50 HZ Supply voltage: 240 volts as a minimum / Permitted supply voltage: 198 v up to 264 v preheating Lamp start: Within 0.5 s Approval marks: ENEC 10 and VDE Luminous flux: Same at AC or DC operation Mains harmonics: Acc. to EN 61000 - 3-2 200/25 200/25 RFI suppression: Acc. to EN 55015 Immunity: Acc. to EN 61547 Suitable for: Emergency lighting systems acc. to DIN VDE 0108 Over voltage protection: To DIN VDE 160 EOL Safety: Safe shut down of lamps in the event of a defect or at Operating freq: Approx. 40 up to 70 KHZ ECG for T5 / Ø 16mm 50 HZ Supply voltage: 240 volts as a minimum / Permitted supply voltage: 198 v up to 254 v preheating Lamp start: Within 2 s Approval marks: ENEC 10 and VDE Luminous flux: Same at AC or DC operation Mains harmonics: Acc. to EN 61000 - 3-2 201/25 201/25 RFI suppression: Acc. to EN 55015 Immunity: Acc. to EN 61547 Suitable for: Emergency lighting systems acc. to DIN VDE 0108 Over voltage protection: To DIN VDE 160 EOL Safety: Safe shut down of lamps in the event of a defect or at Operating freq: Approx. 40 up to 70 KHZ ECG for T5 / Ø 16mm 50 HZ Supply voltage: 240 volts as a minimum / Permitted supply voltage: 198 v up to 254 v.v preheating Lamp start: Within 0.5 s Approval marks: ENEC 10 and VDE Luminous flux: Same at AC or DC operation Mains harmonics: Acc. to EN 61000 - 3-2 202/25 202/25 RFI suppression: Acc. to EN 55015 Immunity: Acc. to EN 61547 Suitable for: Emergency lighting systems acc. to DIN VDE 0108 Over voltage protection: To DIN VDE 160 EOL Safety: Safe shut down of lamps in the event of a defect or at Operating freq: Approx. 40 KHZBOQ 2012 149
  • 150. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section ECG for T5 / Ø 16mm 50 HZ Supply voltage: 240 volts as a minimum / Permitted supply voltage: 198 v up to 254 v.v preheating Lamp start: Within 0.5 s Approval marks: ENEC 10 and VDE Luminous flux: Same at AC or DC operation Mains harmonics: Acc. to EN 61000 - 3-2 203/25 203/25 RFI suppression: Acc. to EN 55015 Immunity: Acc. to EN 61547 Suitable for: Emergency lighting systems acc. to DIN VDE 0108 Over voltage protection: To DIN VDE 160 EOL Safety: Safe shut down of lamps in the event of a defect or at Operating freq: Approx. 40 KHZ ECG for T5 / Ø 16mm 50 HZ Supply voltage: 240 volts as a minimum / Permitted supply voltage: 198 v up to 254 v.v preheating Lamp start: Within 0.5 s Approval marks: ENEC 10 and VDE Luminous flux: Same at AC or DC operation Mains harmonics: Acc. to EN 61000 - 3-2 204/25 204/25 RFI suppression: Acc. to EN 55015 Immunity: Acc. to EN 61547 Suitable for: Emergency lighting systems acc. to DIN VDE 0108 Over voltage protection: To DIN VDE 160 EOL Safety: Safe shut down of lamps in the event of a defect or at Operating freq: Approx. 40 KHZ ECG for T5 / Ø 16mm 50 HZ Supply voltage: 240 volts as a minimum / Permitted supply voltage: 198 v up to 254 v.v preheating Lamp start: Within 0.5 s Approval marks: ENEC 10 and VDE Luminous flux: Same at AC or DC operation Mains harmonics: Acc. to EN 61000 - 3-2 205/25 205/25 RFI suppression: Acc. to EN 55015 Immunity: Acc. to EN 61547 Suitable for: Emergency lighting systems acc. to DIN VDE 0108 Over voltage protection: To DIN VDE 160 EOL Safety: Safe shut down of lamps in the event of a defect or at Operating freq: Approx. 40 KHZBOQ 2012 150
  • 151. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section ECG for T5 / Ø 16mm 50 HZ Supply voltage: 240 volts as a minimum / Permitted supply voltage: 198 v up to 254 v.v preheating Lamp start: Within 0.5 s Approval marks: ENEC 10 and VDE Luminous flux: Same at AC or DC operation Mains harmonics: Acc. to EN 61000 - 3-2 206/25 206/25 RFI suppression: Acc. to EN 55015 Immunity: Acc. to EN 61547 Suitable for: Emergency lighting systems acc. to DIN VDE 0108 Over voltage protection: To DIN VDE 160 EOL Safety: Safe shut down of lamps in the event of a defect or at Operating freq: Approx. 40 KHZ ECG for T5 / Ø 16mm 50 HZ Supply voltage: 240 volts as a minimum / Permitted supply voltage: 198 v up to 254 v.v preheating Lamp start: Within 0.5 s Approval marks: ENEC 10 and VDE Luminous flux: Same at AC or DC operation Mains harmonics: Acc. to EN 61000 - 3-2 207/25 207/25 RFI suppression: Acc. to EN 55015 Immunity: Acc. to EN 61547 Suitable for: Emergency lighting systems acc. to DIN VDE 0108 Over voltage protection: To DIN VDE 160 EOL Safety: Safe shut down of lamps in the event of a defect or at Operating freq: Approx. 40 KHZ ECG for T5 / Ø 16mm 50 HZ Supply voltage: 240 volts as a minimum / Permitted supply voltage: 198 v up to 254 v.v preheating Lamp start: Within 0.5 s Approval marks: ENEC 10 and VDE Luminous flux: Same at AC or DC operation Mains harmonics: Acc. to EN 61000 - 3-2 208/25 208/25 RFI suppression: Acc. to EN 55015 Immunity: Acc. to EN 61547 Suitable for: Emergency lighting systems acc. to DIN VDE 0108 Over voltage protection: To DIN VDE 160 EOL Safety: Safe shut down of lamps in the event of a defect or at Operating freq: Approx. 40 KHZBOQ 2012 151
  • 152. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section ECG for T5 / Ø 16mm 50 HZ Supply voltage: 240 volts as a minimum / Permitted supply voltage: 198 v up to 254 v.v preheating Lamp start: Within 0.5 s Approval marks: ENEC 10 and VDE Luminous flux: Same at AC or DC operation Mains harmonics: Acc. to EN 61000 - 3-2 209/25 209/25 RFI suppression: Acc. to EN 55015 Immunity: Acc. to EN 61547 Suitable for: Emergency lighting systems acc. to DIN VDE 0108 Over voltage protection: To DIN VDE 160 EOL Safety: Safe shut down of lamps in the event of a defect or at Operating freq: Approx. 40 KHZ ECG for T5 / Ø 16mm 50 HZ Supply voltage: 240 volts as a minimum / Permitted supply voltage: 198 v up to 264 v.v preheating Lamp start: Within 0.5 s Approval marks: ENEC 10 and VDE Luminous flux: Same at AC or DC operation Mains harmonics: Acc. to EN 61000 - 3-2 210/25 210/25 RFI suppression: Acc. to EN 55015 Immunity: Acc. to EN 61547 Suitable for: Emergency lighting systems acc. to DIN VDE 0108 Over voltage protection: To DIN VDE 160 EOL Safety: Safe shut down of lamps in the event of a defect or at Operating freq: Approx. 45 up to 100 KHZ ECG for T5 / Ø 16mm 50 HZ Supply voltage: 240 volts as a minimum / Permitted supply voltage: 198 v up to 264 v.v preheating Lamp start: Within 0.5 s Approval marks: ENEC 10 and VDE Luminous flux: Same at AC or DC operation Mains harmonics: Acc. to EN 61000 - 3-2 211/25 211/25 RFI suppression: Acc. to EN 55015 Immunity: Acc. to EN 61547 Suitable for: Emergency lighting systems acc. to DIN VDE 0108 Over voltage protection: To DIN VDE 160 EOL Safety: Safe shut down of lamps in the event of a defect or at Operating freq: Approx. 40up to 100 KHZBOQ 2012 152
  • 153. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section ECG for T5 / Ø 16mm 50 HZ Supply voltage: 240 volts as a minimum / Permitted supply voltage: 198 v up to 264 v.v preheating Lamp start: Within 0.5 s Approval marks: ENEC 10 and VDE Luminous flux: Same at AC or DC operation Mains harmonics: Acc. to EN 61000 - 3-2 212/25 212/25 RFI suppression: Acc. to EN 55015 Immunity: Acc. to EN 61547 Suitable for: Emergency lighting systems acc. to DIN VDE 0108 Over voltage protection: To DIN VDE 160 EOL Safety: Safe shut down of lamps in the event of a defect or at Operating freq: Approx. 40 up to 100 KHZ ECG for T5 / Ø 16mm 50 HZ Supply voltage: 240 volts as a minimum / Permitted supply voltage: 198 v up to 264 v.v preheating Lamp start: Within 0.5 s Approval marks: ENEC 10 and VDE Luminous flux: Same at AC or DC operation Mains harmonics: Acc. to EN 61000 - 3-2 213/25 213/25 RFI suppression: Acc. to EN 55015 Immunity: Acc. to EN 61547 Suitable for: Emergency lighting systems acc. to DIN VDE 0108 Over voltage protection: To DIN VDE 160 EOL Safety: Safe shut down of lamps in the event of a defect or at Operating freq: Approx. 40 up to 100 KHZ ECG for T5 / Ø 16mm 50 HZ Supply voltage: 240 volts as a minimum / Permitted supply voltage: 198 v up to 264 v.v Approval marks: ENEC 10 and VDE Luminous flux: Same at AC or DC operation Mains harmonics: Acc. to EN 61000 - 3-2 RFI suppression: Acc. to EN 55015 214/25 214/25 Immunity: Acc. to EN 61547 Suitable for: Emergency lighting systems acc. to DIN VDE 0108 Over voltage protection: To DIN VDE 160 EOL Safety: Safe shut down of lamps in the event of a defect or at Protection class: I, or II Wattage: 2x24 watt.tBOQ 2012 153
  • 154. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section ECG for T5 / Ø 16mm Supply voltage: 240 volts as a minimum / 50 HZ Approval marks: ENEC 10 and VDE Luminous flux: Same at AC or DC operation Mains harmonics: Acc. to EN 61000 - 3-2 RFI suppression: Acc. to EN 55015 Immunity: Acc. to EN 61547 215/25 215/25 Suitable for: Emergency lighting systems acc. to DIN VDE 0108 Over voltage protection: To DIN VDE 160 Safety: Safe shut down of lamps in the event of a defect or at EOL Protection class: I, or II Wattage: 2x39 watt.t Hint: ECG for T5 / Ø 16mm 50 HZ Supply voltage: 240 volts as a minimum / Approval marks: ENEC 10 and VDE Luminous flux: Same at AC or DC operation Mains harmonics: Acc. to EN 61000 - 3-2 RFI suppression: Acc. to EN 55015 Immunity: Acc. to EN 61547 216/25 216/25 Suitable for: Emergency lighting systems acc. to DIN VDE 0108 Over voltage protection: To DIN VDE 160 EOL Safety: Safe shut down of lamps in the event of a defect or at Operating freq: Approx. 40 up to 100 KHZ Protection class: I, or II Wattage: 2x49 watt.t ECG for T5 / Ø 16mm 50 HZ Supply voltage: 240 volts as a minimum / preheating Lamp start: Within 0.5 s Approval marks: ENEC 10 and VDE Luminous flux: Same at AC or DC operation Mains harmonics: Acc. to EN 61000 - 3-2 RFI suppression: Acc. to EN 55015 217/25 217/25 Immunity: Acc. to EN 61547 Suitable for: Emergency lighting systems acc. to DIN VDE 0108 Over voltage protection: To DIN VDE 160 EOL Safety: Safe shut down of lamps in the event of a defect or at Operating freq: Approx. 40 up to 100 KHZ Protection class: I, or IIBOQ 2012 154
  • 155. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section ECG for T5 / Ø 16mm Supply voltage: 240 volts as a minimum / 50 HZ Permitted supply voltage: 198 up to 254 v Lamp start: Circular Approval marks: ENEC 10 and VDE Luminous flux: Same at AC or DC operation 218/25 218/25 Mains harmonics: Acc. to EN 61000 - 3-2 RFI suppression: Acc. to EN 55015 Immunity: Acc. to EN 61547 Suitable for: Emergency lighting systems acc. to DIN VDE 0108 Over voltage protection: To DIN VDE 160 Safety: Safe shut down of lamps in the event of a defect or at EOL ECG for T5 / Ø 16mm Supply voltage: 240 volts as a minimum / 50 HZ Permitted supply voltage: 198 up to 254 v Lamp start: Within 1 s preheating Approval marks: ENEC 10 and VDE Luminous flux: Same at AC or DC operation 219/25 219/25 Mains harmonics: Acc. to EN 61000 - 3-2 RFI suppression: Acc. to EN 55015 Immunity: Acc. to EN 61547 Suitable for: Emergency lighting systems acc. to DIN VDE 0108 Over voltage protection: To DIN VDE 160 Safety: Safe shut down of lamps in the event of a defect or at EOL ECG for T5 / Ø 16mm Supply voltage: 240 volts as a minimum / 50 HZ Permitted supply voltage: 198 up to 254 v Lamp start: Within 1 s preheating Approval marks: ENEC 10 and VDE Luminous flux: Same at AC or DC operation 220/25 220/25 Mains harmonics: Acc. to EN 61000 - 3-2 RFI suppression: Acc. to EN 55015 Immunity: Acc. to EN 61547 Suitable for: Emergency lighting systems acc. to DIN VDE 0108 Over voltage protection: To DIN VDE 160 Safety: Safe shut down of lamps in the event of a defect or at EOLBOQ 2012 155
  • 156. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section v 12 : With polyester resin Screw terminals: 0.5 Up to 2.5 mm2 Insulation class: I 221/25 221/25 Regulations: Produced according to EN 61558, and certified acc. to ISO 9001 Approval mark: ENEC / VDE Standard supply: With fuse holder at primary side Mains supply: 240/ 11.5 volts, 50 HZ Wattage: 35 up to 50 watt v 12 : With polyester resin Screw terminals: 0.5 Up to 2.5 mm2 Insulation class: I 222/25 222/25 Regulations: Produced according to EN 61558, and certified acc. to ISO 9001 Approval mark: ENEC / VDE Standard supply: With fuse holder at primary side Mains supply : 240/ 11.5 volts, 50 HZ Wattage: 60 up to 105 watt v 12 : With polyester resin Screw terminals: 0.5 Up to 2.5 mm2 Insulation class: I 223/25 223/25 Regulations: Produced according to EN 61558, and certified acc. to ISO 9001 Approval mark: ENEC / VDE Standard supply: With self- holding protection temperature switch against over heating Mains supply: 240/ 11.5 volts, 50 HZ Wattage: 35 up to 50 wattBOQ 2012 156
  • 157. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts Section v 12 : With polyester resin Screw terminals: 0.5 Up to 2.5 mm2 Insulation class: I Regulations: Produced according to EN 61558, and certified acc. to ISO 9001 224/25 224/25 Approval mark: ENEC / VDE Standard supply: heating 50 HZ Mains supply: 240/ 11.5 volts, Wattage: 60 up to 105 watt v 12 incandescent lamp : With polyester resin Screw terminals: 0.5 Up to 2.5 mm2 Insulation class: II Regulations: Produced acc. to EN 61558, EN 60598 225/25 225/25 Approval mark: ENEC / VDE Standard supply: , and with integrated cord girb 50 HZ Mains supply: 240/ 11.5 volts, Wattage: 35 up to 50 watt Casing: Polycarbonate, encapsulated with electrical resin 12v Casing: Screw terminals: 4mm2 Quantity of screw terminals: 2x2 , and 3x2 Standard supply: With automatic reset thermal cut-out, with integrated cord grip 226/25 226/25 Insulation class: II Dimming: / Approval mark: ENEC / VDE Mains supply: 240 / 11.5 volts Wattage: 50 up to 150 watt Hint: suitable for installation in furniture, and on combustible surfacesBOQ 2012 157
  • 158. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 158
  • 159. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 159
  • 160. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 160
  • 161. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 161
  • 162. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 162
  • 163. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 163
  • 164. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 164
  • 165. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 165
  • 166. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 166
  • 167. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 167
  • 168. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 168
  • 169. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 169
  • 170. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 170
  • 171. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 171
  • 172. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 172
  • 173. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 173
  • 174. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 174
  • 175. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 175
  • 176. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 176
  • 177. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 177
  • 178. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 178
  • 179. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 179
  • 180. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 180
  • 181. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 181
  • 182. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 182
  • 183. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 183
  • 184. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 184
  • 185. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 185
  • 186. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 186
  • 187. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 187
  • 188. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 188
  • 189. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 189
  • 190. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 190
  • 191. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 191
  • 192. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 192
  • 193. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 193
  • 194. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 194
  • 195. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 195
  • 196. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 196
  • 197. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 197
  • 198. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 198
  • 199. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 199
  • 200. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 200
  • 201. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 201
  • 202. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 202
  • 203. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 203
  • 204. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 204
  • 205. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 205
  • 206. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 206
  • 207. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 207
  • 208. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 208
  • 209. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 209
  • 210. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 210
  • 211. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 211
  • 212. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 212
  • 213. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 213
  • 214. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 214
  • 215. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 215
  • 216. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 216
  • 217. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 217
  • 218. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 218
  • 219. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 219
  • 220. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 220
  • 221. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 221
  • 222. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 222
  • 223. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 223
  • 224. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 224
  • 225. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 225
  • 226. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 226
  • 227. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 227
  • 228. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 228
  • 229. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 229
  • 230. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 230
  • 231. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 231
  • 232. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 232
  • 233. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 233
  • 234. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 234
  • 235. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 235
  • 236. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 236
  • 237. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 237
  • 238. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 238
  • 239. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 239
  • 240. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 240
  • 241. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 241
  • 242. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 242
  • 243. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 243
  • 244. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 244
  • 245. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 245
  • 246. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 246
  • 247. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 247
  • 248. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 248
  • 249. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 249
  • 250. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 250
  • 251. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 251
  • 252. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 252
  • 253. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 253
  • 254. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 254
  • 255. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 255
  • 256. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 256
  • 257. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 257
  • 258. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 258
  • 259. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 259
  • 260. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 260
  • 261. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 261
  • 262. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 262
  • 263. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 263
  • 264. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 264
  • 265. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 265
  • 266. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 266
  • 267. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 267
  • 268. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 268
  • 269. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 269
  • 270. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 270
  • 271. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 271
  • 272. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 272
  • 273. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 273
  • 274. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 274
  • 275. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 275
  • 276. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 276
  • 277. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 277
  • 278. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 278
  • 279. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 279
  • 280. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 280
  • 281. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 281
  • 282. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 282
  • 283. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 283
  • 284. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 284
  • 285. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 285
  • 286. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 286
  • 287. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 287
  • 288. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 288
  • 289. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 289
  • 290. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 290
  • 291. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 291
  • 292. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 292
  • 293. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 293
  • 294. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 294
  • 295. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 295
  • 296. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 296
  • 297. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 297
  • 298. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 298
  • 299. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 299
  • 300. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 300
  • 301. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 301
  • 302. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 302
  • 303. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 303
  • 304. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 304
  • 305. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 305
  • 306. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 306
  • 307. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 307
  • 308. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 308
  • 309. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 309
  • 310. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 310
  • 311. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 311
  • 312. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 312
  • 313. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 313
  • 314. UNI TED A R AB EM IR A TE S MIN I STR Y OF INT ER IOR A bu Dha b i Po l ic e G.H.Q Financial & Services General Directorate Engineering Projects Administration Tenders and Contracts SectionBOQ 2012 314