A Guide To Designing And Printing Your Laser Labels
Upcoming SlideShare
Loading in...5
×
 

A Guide To Designing And Printing Your Laser Labels

on

  • 504 views

 

Statistics

Views

Total Views
504
Views on SlideShare
504
Embed Views
0

Actions

Likes
0
Downloads
2
Comments
0

0 Embeds 0

No embeds

Accessibility

Categories

Upload Details

Uploaded via as Adobe PDF

Usage Rights

© All Rights Reserved

Report content

Flagged as inappropriate Flag as inappropriate
Flag as inappropriate

Select your reason for flagging this presentation as inappropriate.

Cancel
  • Full Name Full Name Comment goes here.
    Are you sure you want to
    Your message goes here
    Processing…
Post Comment
Edit your comment

A Guide To Designing And Printing Your Laser Labels A Guide To Designing And Printing Your Laser Labels Document Transcript

  • A Guide To Designing And Printing Your Laser LabelsAuthor – Label Planet LtdIntroductionSetting up and printing labels on laser or inkjet printers should be a simple process. As with manythings, when you have done it once then it is really easy. The problem is that when you try and setlabels up for the first time, help can be difficult to find and if the print does not line up it can be hardto assess exactly what has gone wrong. Over the years Label Planet Ltd has assisted thousands of“first time” label printers and this article will hopefully steer you onto the right track and help solvecommon alignment problems.Setting Up The Label DesignNot many people know that within Microsoft® Word there is a simple labelling program which helpsyou to position the print. It is fairly basic but you can insert images and use all the Word formattingfeatures for your text. Advanced users can set up variable fields to be filled later with data from listsor databases. The program works by displaying rectangular cells which represent the labels on thesheet (it’s not sophisticated enough to show circles).The label printing option is under “tools” and then “letters and mailings” on the main toolbar. Youcan select a label layout under “Options” if you know the Avery® template number (choose Avery A4and A5 sizes), or you can generate your own template by typing in the measurements. Once youhave the template you need, we recommend that you enter some text into the window and select“New Document”; this will generate an A4 page displaying the cells.Clearly, if you have a page with say 40 labels on it, you will not want to design the label 40 times! Toavoid this we recommend that you ignore all the cells apart from the cell in the top left corner,design your label here first and then cell copy it into the rest of the page. The “cell copy” function isdescribed below.To generate more rows of text in a cell, simply place your curser at the end of a row and press“enter”. The best way to insert images into the cell is to highlight a row of text and then use the“insert” function. You can also centralise the text in a cell using the centralisation tool. To check howyour design looks when printed, just print it onto plain paper and hold the printed sheet up to the
  • light against a sheet of labels.Once you have perfected the top left cell, then you can use “cell copy” to duplicate the content andposition of your design into all the other cells on the page. Select the top left hand cell by positioningyour curser on the left hand vertical border of the cell until it displays a bold diagonal black arrow.When you see the arrow, left click to select and then right click and choose “copy”. The cell is nowcopied to your clipboard. Move the curser to the top of a column and when you get a bold, blackvertical arrow, left click to select the column, then right click and choose “cell paste”. The contentsof your designed cell will copy into all the cells in that column.Design Hints And TipsLaser and inkjet printers have an accuracy of approximately plus or minus 1mm in the vertical and inthe horizontal, and the paper can also rotate slightly as it goes through the printer. You need to takethis into account when you design your labels. If possible, avoid designing labels with a borderaround them because any inaccuracy will be visible.Laser and inkjet printers do not print right up to the edge of the A4 sheet, so if you have labels withno side border remember that you need to allow 3mm (depending on the printer) as a border.Printing LabelsAlways read the printer manual before printing labels.The Labels SettingMost Laser printers have a “labels” setting; this is because printer manufacturers have theirmachines set up for 80gsm paper as a default setting, but they realise that people may want to printonto labels and other materials. On the screen that appears before you print there is a “properties”or “settings” button and you will find different material settings. The “labels” setting will slow downthe printer and will alter the temperature of the fuser unit, so that more energy is supplied to thelabels.This bonds the toner to the surface of the labels. If you use the normal paper settings then thetoner may rub off easily because there has not been enough energy to bond it correctly.Laser Labels Have Water AddedLaser labels are made from paper, adhesives and backing paper which are specified for laserprinting. For example, the adhesive will be stable right up to 220 degrees (hottest lasers operate at190 degrees; most are below 150 degrees). Laser paper also has some moisture content to help thetoner to bond properly. If you put a sheet through a laser printer twice, then on the second print thetoner may rub off. This is because the moisture has been reduced out on the first pass. It is alsoadvisable to keep unused labels in their packaging in order to retain the water content.Feeding Labels CorrectlyAs label sheets go through a printer, they can rotate slightly if the rollers in the printer are notexactly aligned. Above the main paper tray in most printers is a media bypass slot; you should usethis slot if you can, as fewer rollers will be used and any rotation will be minimised.
  • Also, paper labels have a grain (like wood) which runs from the top to the bottom of the A4 sheet.Therefore they must always be fed narrow edge leading, ie portrait into printers. Feeding the labelslandscape may make the labels release as they go over the rollers, hence jamming the machine.Lining Up The PrintIf the print does not line up it can be difficult to work out exactly what is wrong and how to put itright. When Label Planet gets a call from a customer who needs assistance, we use a simple 4question method to establish what is going wrong. The customer needs to refer to a printed sheet oflabels and answer the following questions:Ignoring all the labels except the top left hand label, how far out is the print in the vertical direction?Ignoring all the labels except the top left hand label, how far out is the print in the horizontaldirection?Ignoring all the labels except the bottom right hand label, how far out is the print in the verticaldirection?Ignoring all the labels except the bottom right hand label, how far out is the print in the horizontaldirection?These 4 values can be used to determine what is wrong and how to correct the position of the print.There could be several problems at the same time and it is best to fix them one at a time, in theorder shown below:Is Your Software Set To A4?If the print finishes 10mm above or below the last row of labels but is aligned correctly at the top ofthe sheet, then you should check that the paper setting in your software is A4 portrait.Do The Margins Need Adjusting?If both vertical figures are similar (within 2mm) then you need to adjust the top margin to eitherpush the print down (increased margin) or to pull the print up (decreased margin). You can do this inthe “page settings” section of word which is under “file” on the top menu bar.Similarly, if both horizontal figures are the same then you need to adjust the side margin.Are You Using The Bypass Slot?If the top horizontal figure is out in one direction but the bottom horizontal figure is out in the otherdirection, then this indicates that the sheet has rotated as it moved through the printer. If you usethe media bypass slot which is above the normal paper tray, the rotation will be reduced becausethe labels will miss out at least one set of rollers. Some cheaper printers have rollers that aremisaligned and will always rotate the labels, so you need to take this into account when you designthe labels, or use a better printer.
  • Is The Template Accurate?If the top vertical figure is different from the bottom vertical figure then either the sheet is slippingin the printer due to a worn feed roller, or the template has the wrong spacing for the labels, or thewrong tool has been used to make the labels. If the error varies from sheet to sheet, it is a wornroller; if the error is the same on each sheet then it is the template that needs adjustment. The bestthing to do is to call Label Planet and we will correct the template for you and update our site; all ofour templates were checked when they were made, so this should not happen.We hope that the above information has been useful and that you will visit us atwww.labelplanet.co.uk to buy your laser labels.