Your SlideShare is downloading. ×
Simpson Strongtie Concrete Repair and Strengthening Systems
Simpson Strongtie Concrete Repair and Strengthening Systems
Simpson Strongtie Concrete Repair and Strengthening Systems
Simpson Strongtie Concrete Repair and Strengthening Systems
Simpson Strongtie Concrete Repair and Strengthening Systems
Simpson Strongtie Concrete Repair and Strengthening Systems
Simpson Strongtie Concrete Repair and Strengthening Systems
Simpson Strongtie Concrete Repair and Strengthening Systems
Simpson Strongtie Concrete Repair and Strengthening Systems
Simpson Strongtie Concrete Repair and Strengthening Systems
Simpson Strongtie Concrete Repair and Strengthening Systems
Simpson Strongtie Concrete Repair and Strengthening Systems
Simpson Strongtie Concrete Repair and Strengthening Systems
Simpson Strongtie Concrete Repair and Strengthening Systems
Simpson Strongtie Concrete Repair and Strengthening Systems
Simpson Strongtie Concrete Repair and Strengthening Systems
Simpson Strongtie Concrete Repair and Strengthening Systems
Simpson Strongtie Concrete Repair and Strengthening Systems
Simpson Strongtie Concrete Repair and Strengthening Systems
Simpson Strongtie Concrete Repair and Strengthening Systems
Simpson Strongtie Concrete Repair and Strengthening Systems
Simpson Strongtie Concrete Repair and Strengthening Systems
Simpson Strongtie Concrete Repair and Strengthening Systems
Simpson Strongtie Concrete Repair and Strengthening Systems
Simpson Strongtie Concrete Repair and Strengthening Systems
Simpson Strongtie Concrete Repair and Strengthening Systems
Simpson Strongtie Concrete Repair and Strengthening Systems
Simpson Strongtie Concrete Repair and Strengthening Systems
Simpson Strongtie Concrete Repair and Strengthening Systems
Simpson Strongtie Concrete Repair and Strengthening Systems
Simpson Strongtie Concrete Repair and Strengthening Systems
Simpson Strongtie Concrete Repair and Strengthening Systems
Simpson Strongtie Concrete Repair and Strengthening Systems
Simpson Strongtie Concrete Repair and Strengthening Systems
Simpson Strongtie Concrete Repair and Strengthening Systems
Simpson Strongtie Concrete Repair and Strengthening Systems
Simpson Strongtie Concrete Repair and Strengthening Systems
Simpson Strongtie Concrete Repair and Strengthening Systems
Simpson Strongtie Concrete Repair and Strengthening Systems
Simpson Strongtie Concrete Repair and Strengthening Systems
Simpson Strongtie Concrete Repair and Strengthening Systems
Simpson Strongtie Concrete Repair and Strengthening Systems
Simpson Strongtie Concrete Repair and Strengthening Systems
Simpson Strongtie Concrete Repair and Strengthening Systems
Simpson Strongtie Concrete Repair and Strengthening Systems
Simpson Strongtie Concrete Repair and Strengthening Systems
Simpson Strongtie Concrete Repair and Strengthening Systems
Simpson Strongtie Concrete Repair and Strengthening Systems
Simpson Strongtie Concrete Repair and Strengthening Systems
Simpson Strongtie Concrete Repair and Strengthening Systems
Simpson Strongtie Concrete Repair and Strengthening Systems
Simpson Strongtie Concrete Repair and Strengthening Systems
Simpson Strongtie Concrete Repair and Strengthening Systems
Simpson Strongtie Concrete Repair and Strengthening Systems
Simpson Strongtie Concrete Repair and Strengthening Systems
Simpson Strongtie Concrete Repair and Strengthening Systems
Simpson Strongtie Concrete Repair and Strengthening Systems
Simpson Strongtie Concrete Repair and Strengthening Systems
Simpson Strongtie Concrete Repair and Strengthening Systems
Simpson Strongtie Concrete Repair and Strengthening Systems
Simpson Strongtie Concrete Repair and Strengthening Systems
Simpson Strongtie Concrete Repair and Strengthening Systems
Simpson Strongtie Concrete Repair and Strengthening Systems
Simpson Strongtie Concrete Repair and Strengthening Systems
Simpson Strongtie Concrete Repair and Strengthening Systems
Simpson Strongtie Concrete Repair and Strengthening Systems
Simpson Strongtie Concrete Repair and Strengthening Systems
Simpson Strongtie Concrete Repair and Strengthening Systems
Upcoming SlideShare
Loading in...5
×

Thanks for flagging this SlideShare!

Oops! An error has occurred.

×
Saving this for later? Get the SlideShare app to save on your phone or tablet. Read anywhere, anytime – even offline.
Text the download link to your phone
Standard text messaging rates apply

Simpson Strongtie Concrete Repair and Strengthening Systems

804

Published on

Published in: Services, Business
0 Comments
0 Likes
Statistics
Notes
  • Be the first to comment

  • Be the first to like this

No Downloads
Views
Total Views
804
On Slideshare
0
From Embeds
0
Number of Embeds
2
Actions
Shares
0
Downloads
43
Comments
0
Likes
0
Embeds 0
No embeds

Report content
Flagged as inappropriate Flag as inappropriate
Flag as inappropriate

Select your reason for flagging this presentation as inappropriate.

Cancel
No notes for slide

Transcript

  • 1. ­(800) 999‑5099 www.strongtie.com Repair, Protection and Strengthening Systems for Concrete and Masonry Product Guide F-R-PG13
  • 2. 2 F‑R‑PG13 ©2013 Simpson Strong‑Tie Company Inc. (800) 999-5099 | strongtie.com Repair Protect Strengthen Repair, Protection and Strengthening Systems for Concrete and MasonryRepair, Protection and Strengthening Systems for Concrete and Masonry
  • 3. 3F‑R‑PG13 ©2013 Simpson Strong‑Tie Company Inc. (800) 999-5099 | strongtie.com A Shared Commitment to Innovation … In 2011, Simpson Strong-Tie acquired Fox Industries, Inc., a company founded in 1969 by Douglas Fox that produces a wide range of products that repair, protect and strengthen concrete, masonry, steel and wood structures. This acquisition supports our ongoing strategy to expand our product offering for the global industrial, commercial and infrastructure markets. Stronger Together Since entering the anchoring industry in 1994, Simpson Strong-Tie has become a trusted manufacturer of chemical, mechanical and direct-fastening product solutions for residential, industrial and commercial markets. Our history and demonstrated expertise in development, testing and manufacturing of highly-technical, performance-critical products are now joined by Fox Industries’ 40+ years of experience of producing innovative, contractor- tested product solutions. This experience, proven track record, and experienced field and technical support allows Simpson Strong-Tie to offer our unique brand of service to customers in industrial, commercial and infrastructure markets. We are proud to introduce our Repair, Protection and Strengthening Systems for Concrete and Masonry. FOX INDUSTRIESE N G I N E E R E D P R O D U C T S ® Repair, Protection and Strengthening Systems for Concrete and Masonry
  • 4. 4 F‑R‑PG13 ©2013 Simpson Strong‑Tie Company Inc. (800) 999-5099 | strongtie.com The Simpson Strong‑Tie Company Inc. was founded in Oakland, California and has been manufacturing wood-to-wood and wood-to-concrete connectors since 1956. Since then, Simpson Strong‑Tie has grown to be the world’s largest manufacturer of construction connectors. In recent years the company’s growth has included expanding its product offering to include pre-manufactured shearwalls, anchor systems for concrete and masonry, collated fastening systems and repair, protection and strengthening systems for concrete and masonry. Simpson Strong-Tie Company Inc. services include: • Quality products value-engineered for the lowest installed cost at the highest rated performance levels. • Most thoroughly tested and evaluated products in the industry. • Strategically-located manufacturing and/or warehouse facilities. • Field Engineering support. • National code agency listings. • National factory sales team. • In-house R&D, and tool and die professionals. • In-house product testing and quality control engineers. • Member of ACI, AITC, ASTM, ASCE, CAMA, CSI, ICC, ICRI, NBMDA, NLBMDA, PATMI, SETMA, STAFDA, NFBA, WTCA and local organizations. • Various D.O.T. approvals. Simpson Strong‑Tie Quality Policy We help people build safer structures economically. We do this by designing, engineering and manufacturing “No Equal” structural connectors and other related products that meet or exceed our customers’ needs and expectations. Everyone is responsible for product quality and is committed to ensuring the effectiveness of the Quality Management System. Karen Colonias Chief Executive Officer Terry Kingsfather President Limited Warranty This Limited Warranty must be read in conjunction with the information and specifications in this catalog and on the www.strongtie.com website, including the General Notes, General Instructions for the Installer, General Instructions for the Designer, General Principles of Products and Services, Building Codes, Corrosion Information and Terms & Conditions of Sale, along with any other information or specifications published by Simpson Strong-Tie Company Inc. This Limited Warranty is effective as of the date of publication of this catalog. Please consult www.strongtie.com for the warranty information applicable on the date of purchase. Unless otherwise noted below, this Limited Warranty applies to all Simpson Strong-Tie® products (“Products”). Simpson Strong-Tie Company Inc. warrants each Product to be free from defects in materials, manufacturing and design when properly specified, installed, and maintained, and when used in accordance with the design limits and the structural, technical, and environmental specifications on the website, in this catalog or on the Product package or label. This warranty is void and does not apply to (a) any Product purchased from an unauthorized dealer, retailer or distributor, (b) deterioration or defects in any Product due to environmental conditions or inadequate or improper maintenance, (c) any failure or defect caused by improper installation, (d) any use of a Product in temperatures and environmental conditions outside the ranges specified for such Product on the website, in this catalog or on the Product package or label, (e) any use of a Product outside of its shelf-life specifications, (f) any failure or damage caused by a third-party product, (g) any use of a Product in a structure that does not comply with all applicable building codes, laws, rules and regulations, or (h) any non-catalog or modified Product Simpson Strong-Tie® Products are designed for a wide variety of structural and non-structural uses. Each Product is designed for the load capacities and uses listed on the website, in this catalog or on the Product package or label. Additional performance limitations for specific Products may be listed on the website, in this catalog or on the Product package or label. All applicable specifications must be carefully reviewed before using any Product. Simpson Strong-Tie Company Inc. assumes no liability for confirming that any Product is appropriate for an intended use, and each intended use of a Product must be reviewed and approved by qualified professionals. Due to the particular characteristics of potential impact events such as earthquakes and high velocity winds, the specific design and location of the structure, the building materials used, the quality of construction, or the condition of the soils or substrates involved, damage may nonetheless result to a structure and its contents even if the loads resulting from the impact event do not exceed Simpson Strong-Tie Company Inc.’s specifications and the Products are properly installed in accordance with applicable building codes, laws, rules and regulations. Product demonstrations and similar services provided by Simpson Strong- Tie Company Inc. are based on Simpson Strong-Tie Company Inc.’s present knowledge and experience, are conducted for illustrative or instructive purposes only, do not constitute a warranty of Product capabilities or specifications and do not modify the applicable warranty set forth herein. Simpson Strong-Tie Company Inc. assumes no liability for any representations or statements during such Product demonstrations or other similar services. In the event of any inconsistency between any information provided during any such demonstration or service, and the information in this catalog, on the Product package or label or on the website, the information in this catalog, on the Product package or label or on the website shall govern. All warranty obligations of Simpson Strong-Tie Company Inc. Shall be limited, at its discretion, to either repairing the defective product or providing a replacement for the defective product. This remedy constitutes Simpson Strong-Tie Company Inc. sole obligation and liability and the sole and exclusive remedy of purchaser. The limited warranty herein is expressly in lieu of all other warranties, and, where lawful, Simpson Strong-Tie Company Inc. Disclaims all other warranties, including but not limited to implied warranties of merchantability and fitness for a particular purpose and warranties arising from course of performance, course of dealing or trade usage. In no event will Simpson Strong-Tie Company Inc. Be liable for incidental, consequential, punitive or special damages or direct or indirect loss of any kind, including but not limited to property damage and personal injury. Simpson Strong-Tie Company Inc. entire liability is limited to the purchase price of the defective product. Some states do not allow limitations on implied warranties, or the exclusion or limitation of incidental or consequential damages, so the above limitations and exclusions may not apply. This limited warranty gives specific legal rights. Other rights that vary from state to state may be applicable. Repair, Protection and Strengthening Systems for Concrete and MasonryRepair, Protection and Strengthening Systems for Concrete and Masonry
  • 5. 5F‑R‑PG13 ©2013 Simpson Strong‑Tie Company Inc. (800) 999-5099 | strongtie.com General Principles Assessment, Planning, Preparation, Execution. . . . . . . . . . . . . . . 6–7 Causes of Concrete Deterioration . . . . . . . . . . . . . . . . . . . . . . . . . 8–9 General Concrete Repair Metal Primers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10–11 Bonding Agents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12–13 Repair Mortars. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14–18 Repair Epoxy. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Admixtures. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Crack Repair Epoxy (Low Viscosity) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21–25 Epoxy (Gel) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Methyl Methacrylate. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 ETI Cartridge Solutions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 ETI Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Non-Structural Injection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30–32 Joint Sealing Primers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Flexible Sealants . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34–36 Semi-Rigid Sealants. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Performance Coating Cementitious Coatings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38–39 Epoxy Coatings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40–46 Water Repellents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47–48 Decorative/Protective. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49–51 Specialty Products Rail. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52–56 Grouts (Cementious). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57–58 Grouts (Epoxy). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 FX‑70® Structural Repair and Protection System. . . . . . . . . . . . 60–61 Underwater. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 Epoxy. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 Fillers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 Solvents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64-65 Curing Compounds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 21–29Crack Repair 52–65Specialty Products 10–20 General Concrete Repair 38–51Performance Coating 33–37 Non-Structural Injection Joint Sealing 30–32 This Product Guide does not provide complete installation and safety information. For detailed information regarding product use, surface preparation, mixing, application, limitations, and safety warnings, refer to the Product Data Sheet(s), Material Safety Data Sheet(s) and other information and specifications available at www.strongtie.com or by calling (800) 999-5099. It is the responsibility of each purchaser and user of each Product to determine the suitability of the Product for its intended use. Prior to using any Product, consult a qualified design professional for advice regarding the suitability and use of the Product, including whether the capacity of any structural building element may be impacted by a repair. As jobsite conditions vary greatly, a small- scale test patch is required to verify product suitability prior to full-scale application. The installer must read, understand and follow all written instructions and warnings contained on the product label(s), Product Data Sheet(s), Material Safety Data Sheet(s) and the www.strongtie.com website prior to use. For industrial use only by qualified applicators. Proposition 65: Products contained within this document contain materials listed by the state of California as known to cause cancer, birth defects, or reproductive harm. KEEP OUT OF REACH OF CHILDREN! Repair, Protection and Strengthening Systems for Concrete and Masonry
  • 6. 6 F‑R‑PG13 ©2013 Simpson Strong‑Tie Company Inc. (800) 999-5099 | strongtie.com Because each jobsite presents a unique challenge, your local Simpson Strong‑Tie representative is available to help you evaluate the condition and develop a customized product selection and repair plan based upon: • Type of failure • Physical access considerations • Downtime or in‑service time requirements • Budget • Site considerations 1. Assessment Before initiating any RPS plan, it is imperative to conduct a thorough evaluation of the substrate or structure to be repaired. Many factors can contribute to the deterioration of concrete and masonry structures, including poor worksmanship or design, cracking, embedded-metal corrosion, delaminations and others. Properly assessing the deterioration and its cause should involve a qualified engineer who can determine if the design capacity of the structure has been impacted and what implications it may have on the repair strategy. Other factors to consider are access to the repair site, time to complete the repair, impact on operations, budget and others. A thorough assessment of all factors will help develop the best repair strategy for the building owner. Repair, protection and strengthening of concrete and masonry is a complex procedure that presents unique challenges on every jobsite. Following the four-step process of assessment, planning, preparation and execution increases the likelihood of an efficient, successful repair. General Principles 2. Planning Repair, Protection and Strengthening Systems for Concrete and MasonryRepair, Protection and Strengthening Systems for Concrete and Masonry
  • 7. 7F‑R‑PG13 ©2013 Simpson Strong‑Tie Company Inc. (800) 999-5099 | strongtie.com A well-executed plan, implemented by well-qualified contractors trained in the application of the products being used will result in a successful repair. Simpson Strong-Tie offers workshop and on-site training and support by field representatives with decades of field experience. Contact your local representative, call 800‑999‑5099, or visit www.strongtie.com for more information. 3. Preparation Execution of these steps will increase the likelihood of a successful and lasting repair. 4. Execution The success of any repair program depends heavily on proper preparation of the site to be repaired. Factors to consider include: • Implementing a safety program • Limiting access to the site • Demolition and removal of damaged building components or systems • Surface preparation of substrate • Proper staging and storage of repair materials • Proper mixing of the selected repair materials Repair, Protection and Strengthening Systems for Concrete and Masonry
  • 8. 8 F‑R‑PG13 ©2013 Simpson Strong‑Tie Company Inc. (800) 999-5099 | strongtie.com In order to effectively assess, plan, prepare and execute a successful repair, protection and strengthening (RPS) strategy for concrete and/or masonry, it is important to understand the root cause of the deterioration. Understanding the service conditions of the structure and matching the appropriate product(s) to the performance requirements of the project will ensure a lasting repair tailored to the specific needs of the owner. The two main factors that influence concrete performance are: • Placement Issues (this page) • Service Condition Issues (see p.9) Concrete failures can be the result of a combination of placement and/or service condition issues. Cracking, spalling, leaking, premature or excessive wear, scaling, settlement, deflection and disintegration are examples of conditions that lead to concrete failure. Understanding these failure modes and their root cause is necessary to develop a successful repair strategy. Placement Issues Proper concrete placement is essential to not only satisfy the design and service requirements of the structure, but also to reduce the potential for premature deterioration and reduction of expected lifespan. Identifying defects in the assessment stage of an RPS project is important in order to develop the proper repair plan to address the specific cause of the damaged concrete. One of the most common defects in concrete is cracking. Cracking can be caused by inadequate substrate or sub- base preparation, high water-to-cement ratio, improper curing methods, poor concrete consolidation, timing of control-joint installation and many other placement factors. Cracking can also be caused by design-related issues such as inadequate reinforcement or insufficient control-joint spacing. Excess water increases the water-to-cement ratio of concrete and increases workability; however, this benefit is not without cost. The additional water eventually evaporates in the hydration (curing) process, leaving a porous network of capillary voids and lower overall strength. Excess water can also lead to segregation, or the settling of large aggregates to the bottom of the matrix, resulting in reduced structural capacity and increased likelihood of cracking. Proper curing involves maintaining an adequate moisture content and temperature in freshly placed concrete to allow for full hydration (curing) of the cement while the concrete develops its intended design strength. The absence of moisture stops the hydration process which can lead to lower strengths. Rapid moisture loss of freshly-placed concrete can also lead to plastic shrinkage cracking, which are random shallow cracks on the surface of the concrete. Poor consolidation can result from improper vibration and/ or poor mix design. If the concrete does not fully consolidate around the reinforcing steel, design capacity may not be reached, and cracking can result. Concrete expands and contracts with temperature changes. When these contraction forces exceed the tensile strength of the concrete, cracking can occur. To influence where this cracking will occur, control joints are installed, but the design and timing of control-joint installation are vital to their effectiveness. Reinforcing steel (rebar) is used to increase the tensile strength of concrete. When tensile forces acting upon a concrete element exceed its tensile strength a crack may occur. Reinforcing steel controls the width of the crack and can prevent complete failure of the element. Causes of Concrete Deterioration When planning an RPS strategy for deteriorated concrete, one must consider and address the following in‑service factors: • Environmental conditions • Chemical exposure • Exposure to water and mobile debris • Concrete properties (strength, type, aggregate, etc.) Common placement issues with concrete: Bug Holes Cause: Entrapment of air bubbles on the formed concrete surface. Effect: Uneven concrete surface, increased porosity due to increased surface area, and poor appearance. Rock Pockets Cause: Improper consolidation between large aggregates and cement mortar during the placement process creates large voids in concrete. Effect: Reduction in strength and increased potential for water intrusion, corrosion of reinforcing steel and reduced abrasion resistance. Honeycombing Cause: Improper consolidation of concrete due to lack of vibration or improper mix design. Effect: Reduction in strength and increased potential for water intrusion, corrosion of reinforcing steel and reduced abrasion resistance. Cold Joints Cause: Delays in concrete placement where the initial lift of concrete hardens before subsequent lifts are placed, resulting in a visible lineation and substandard bond between layers. Effect: Water intrusion through the cold joint and corrosion of reinforcing steel. Repair, Protection and Strengthening Systems for Concrete and MasonryRepair, Protection and Strengthening Systems for Concrete and Masonry
  • 9. 9F‑R‑PG13 ©2013 Simpson Strong‑Tie Company Inc. (800) 999-5099 | strongtie.com Chemical Attack Causes: Exposure to acid rain, de-icing salts, in-service chemicals and naturally occurring sulfates in soils and ground water dissolve the cement matrix which results in aggregate loss. Effects: Loss of concrete cover and subsequent corrosion of reinforcing steel. Assessing potential exposure before construction or repair can prevent premature deterioration. Specific cement types, water-repellent sealers or chemically-resistant barrier coatings are all common preventative measures to protect concrete against chemical attack. Alkali-Aggregate Reaction Cause: A chemical reaction between the alkali in cement and high-silica content aggregate forms a gel around the aggregate, preventing proper bond between the aggregate and cement. Effects: The gel expands in the presence of water, creating tension cracking around surface aggregate and delaminations. Surface cracking promotes water intrusion which can lead to metal corrosion and spalling. Careful selection of aggregates and consideration of silica content can help prevent alkali- aggregate reactions. Erosion/Abrasion Causes: Airborne or waterborne debris moving across the concrete surface. Effects: Progressive section loss can lead to inadequate concrete cover and corrosion of the reinforcing steel, reducing structural capacity. High-strength, dense concrete and specialty abrasion-resistant coatings are the most effective means to resist erosion and abrasion. Service Condition Issues Common service condition issues with concrete: Corrosion of Metals Causes: Chloride intrusion, oxygen-water exposure, corrosive chemical environment surrounding reinforcing steel, drop in alkalinity, improper rebar placement. Effects: Corrosion and subsequent expansion of reinforcing steel leads to cracking and spalling, reducing the structural capacity of the concrete. Using concrete with a low water-to-cement ratio and proper rebar placement with adequate concrete cover are common measures used to prevent metal corrosion. Freeze-Thaw Causes: Water-saturated concrete, combined with temperature cycling above and below 32°F (0°C). Effects: Concrete absorbs water into its pores. When the water in the pores freezes, it expands, causing scaling and delaminations. High-strength concrete mix designs that incorporate air-entraining admixtures yield the best defense against freeze-thaw damage. Specialty coatings and water repellents are also commonly used to minimize water absorption and prevent freeze-thaw damage. Repair, Protection and Strengthening Systems for Concrete and Masonry
  • 10. 10 F‑R‑PG13 ©2013 Simpson Strong‑Tie Company Inc. (800) 999-5099 | strongtie.com10 METAL PRIMERS Concrete Repair General Where to Use • Priming reinforcing steel to protect against corrosion • As a corrosion‑resistant steel primer for protective coating systems Features • High zinc content provides superior corrosion protection of steel • Excellent bond to steel • Can be shop or field applied • Ready to use, simply stir and apply • Single‑component product • Fast drying Application Rate • 4–5 DFT mils total applied in two coats • 300-400 ft.2 /gal. (7.3-9.8 m2 /L) per coat depending on surface profile • 775–1,000 lin. ft./gal. (60–80 m/L) for #4 rebar • 600–825 lin. ft./gal. (45–65 m/L) for #5 rebar Limitations • Do not apply to surfaces below 45°F (7°C) • Do not apply to surfaces above 95°F (35°C) • Not recommended for use under high‑solvent, low‑solids coatings or lacquer‑type products • Do not apply to damp or wet surfaces FX‑406 Zinc‑Rich Primer FX‑406 Zinc‑Rich Primer is a single‑component, fast‑drying, zinc‑rich coating designed to protect steel from corrosion by combining a barrier coating with the sacrificial galvanic protection of zinc. Packaging / SKU • 1 quart can (FX406‑QT) • 1 gallon can (FX406‑1) Color Gray Storage Store dry between 40–95°F (4–35°C) Shelf Life 2 years in unopened packaging CSI Specification 03 01 20 Maintenance of Concrete Reinforcing
  • 11. 11F‑R‑PG13 ©2013 Simpson Strong‑Tie Company Inc. (800) 999-5099 | strongtie.com Repair, Protection and Strengthening Systems for Concrete and Masonry GeneralConcreteRepair METAL PRIMERS Where to Use • Priming reinforcing steel to protect against corrosion • To prime and protect reinforcing steel subject to immersion conditions • For additional protection of steel in corrosive environments such as marine structures, areas subject to de‑icing salts, chemical plants, etc • As a corrosion‑resistant steel primer for protective coating systems Features • 6-hour pot life at 72°F (22°C) • Can be applied by brush, roller or spray • High performance for immersion applications • Superior chemical and solvent resistance to single‑component zinc primers • High zinc content provides superior corrosion protection of steel • Excellent bond to steel • Can be shop or field applied Application Rate • 4–5 DFT mils total applied in two coats • 375–450 ft.2 /gal. (9.2–11 m2 /L) per coat depending on surface profile. • 950–1,150 lin. ft./gal. (75–90 m/L) for #4 rebar • 775–950 lin. ft./gal. (60–75 m/L) for #5 rebar Limitations • Do not apply to surfaces below 40°F (4°C) • Do not apply to surfaces above 95°F (35°C) • Do not thin • Do not apply to damp or wet surfaces • Do not apply in thickness greater than 5 mils DFT per coat FX‑408 Zinc‑Rich Epoxy Primer FX‑408 Zinc‑Rich Epoxy Primer is a two‑component, zinc‑rich coating designed to protect steel from corrosion by combining a chemical‑resistant epoxy barrier coating with the sacrificial galvanic protection of zinc. Packaging / SKU 1 gallon kit (FX408KT1) Color Gray Mixing Ratio 5A:1B Storage Store dry between 40–95°F (4–35°C) Shelf Life 2 years in unopened packaging CSI Specification 03 01 20 Maintenance of Concrete Reinforcing
  • 12. 12 F‑R‑PG13 ©2013 Simpson Strong‑Tie Company Inc. (800) 999-5099 | strongtie.com Repair, Protection and Strengthening Systems for Concrete and Masonry GeneralConcreteRepair BONDING AGENTS Where to Use • Bonding new concrete or repair mortar to existing concrete • For warm-weather applications • Where longer open times are required Features • Bonds to both damp and dry concrete • Can be applied by brush, roller, spray or squeegee • 60 minute pot life at 70°F (21°C) • 8 hour open time at 70°F (21°C) for repair mortar installation Application Rate • 60–100 ft.2 /gal. (1.5–2.5 m2 /L) depending on substrate porosity and surface profile Limitations • Do not apply to surfaces below 60°F (16°C) • Do not apply to surfaces above 110°F (43°C) • Repair mortars must be applied while FX‑792LPL is still tacky • Material is a vapor barrier after cure, contact Simpson Strong‑Tie for use in exterior on‑grade applications • Existing concrete should be fully cured prior to application FX‑792LPL Long Pot Life Epoxy Bonding Agent FX‑792LPL Long Pot Life Epoxy Bonding Agent is a two-component,100% solids, moisture‑tolerant epoxy resin designed to increase the bond between freshly placed repair mortars or concrete mixes and existing concrete. Specification Compliance FX‑792LPL exceeds the performance requirements of ASTM C 881, Type II, Grade 2, Class C. Packaging / SKU • 3 gallon kit (FX792LPLKT3) • 15 gallon kit (FX792LPLKT15) • 150 gallon kit (FX792LPLKT150) Color Amber Mixing Ratio 2A:1B Storage Store dry between 40–95°F (4–35°C) Shelf Life 2 years in unopened packaging CSI Specification 03 01 00 Maintenance of Concrete Where to Use • Bonding new concrete or repair mortars to existing concrete • Features • Bonds to both damp and dry concrete • 25-minute pot life at 75°F (24°C) • 3-hour open time at 75°F (24°C) for repair mortar installation • Can be applied by brush, roller, spray or squeegee Application Rate • 60–100 ft.2 /gal. (1.5–2.5 m2 /L) depending on substrate profile and porosity Limitations • Do not apply to surfaces below 40°F (4°C) • Do not apply to surfaces above 95°F (35°C) • Material is a vapor barrier after cure, contact Simpson Strong‑Tie for use in exterior on‑grade applications • Repair mortars and concrete mixes must be applied while FX‑752 is still tacky • Existing concrete should be fully cured prior to application FX‑752 Epoxy Bonding Agent FX‑752 All‑Purpose Epoxy Bonding Agent is a 100% solids, two‑component, moisture‑tolerant epoxy system designed to increase the bond between freshly placed repair mortars or concrete mixes and existing concrete. Specification Compliance FX‑752 exceeds the performance requirements of ASTM C 881, Type II, Grade 2, Class B. Packaging / SKU • 1/2 gallon kit (FX752KT2QT) • 2 gallon kit (FX752KT2) • 10 gallon kit (FX752KT10) Color Gray Mixing Ratio 1A:1B Storage Store dry between 40–95°F (4–35°C) Shelf Life 2 years in unopened packaging CSI Specification 03 01 00 Maintenance of Concrete
  • 13. 13F‑R‑PG13 ©2013 Simpson Strong‑Tie Company Inc. (800) 999-5099 | strongtie.com Repair, Protection and Strengthening Systems for Concrete and Masonry GeneralConcreteRepair BONDING AGENTS Where to Use • Bond new concrete or repair mortar to existing concrete • Integral admixture for thinset patching and stucco mixes Features • Not a vapor barrier • Bonds to both damp and dry concrete • Improves adhesion of Portland cement‑based products • Non-emulsifying • Ready to use, simply stir and apply • Water based and non‑toxic • Can be applied by brush, roller, spray or squeegee Application Rate • Bonding Agent: 200–250 ft.2 /gal. (4.9–6.1 m2 /L) depending on substrate profile and porosity • Admixture: Approximately 4 gallons (15.1 L) per 94 lb. (42.6 kg) of Portland cement Limitations • Do not apply to surfaces below 40°F (4°C) • Do not apply to surfaces above 95°F (35°C) • Repair mortars and concrete mixes must be applied while FX‑Bondcrete is still tacky • FX-Bondcrete may increase air content when used as an admixture • Not compatible with solvent-based curing compounds as an admixture • Protect FX‑Bondcrete from freezing; discard if freezing occurs FX‑Bondcrete Latex Bonding Agent and Admixture FX‑Bondcrete Latex Bonding Agent and Admixture is a single‑component product designed to improve the bond between freshly placed repair mortars or concrete mixes and existing concrete. It also improves the bond of thin-set patching, masonry mortars and stucco mixes as an integral admixture. Specification Compliance FX‑Bondcrete exceeds the performance requirements of ASTM C 1059, Type II. Packaging / SKU • 1 gallon jug (FXBONDCRETE‑1) • 5 gallon pail (FXBONDCRETE‑5) • 50 gallon drum (FXBONDCRETE‑50) Color Milky White Storage Store dry between 40–95°F (4–35°C). Protect from freezing. Shelf Life 2 years in unopened packaging CSI Specification 03 01 00 Maintenance of Concrete
  • 14. 14 F‑R‑PG13 ©2013 Simpson Strong‑Tie Company Inc. (800) 999-5099 | strongtie.com Repair, Protection and Strengthening Systems for Concrete and Masonry GeneralConcreteRepair REPAIR MORTARS Where to Use • Parking facilities, industrial plants, walkways, bridges, tunnels, dams, balconies and elevated structures • Horizontal concrete surfaces • Vertical and overhead concrete surfaces as a form‑and‑pour material • Above, below and on‑grade applications • Free‑flowing repair mortar for hard to reach areas • Leveling mortar Features • Ready to use, simply add potable water • Pourable and pumpable • High early strength • High compressive, flexural, and bond strengths • Excellent freeze/thaw resistance • Can be extended with up to 30 lb. (13.6 kg) per bag with 3/8 in. (0.9 cm) coarse aggregate Yield • 0.43 ft.3 (0.012 m3 ) per 50 lb. (22.7 kg) bag (neat) • 0.62 ft.3 (0.018 m3 ) per 50 lb. (22.7 kg) bag (extended) Limitations • Do not apply to surfaces below 40°F (4°C) • Do not apply to surfaces above 90°F (32°C) • Minimum 1/2 in. (1.3 cm) application thickness for vehicular traffic; 1/4 in. (0.6 cm) for foot traffic • Maximum 3 in. (7.6 cm) application thickness neat • Do not mix partial bags • Not compatible with solvent- based curing compounds • Avoid contact with aluminum surfaces FX‑261 Flowable Polymer Repair Mortar FX‑261 Flowable Polymer Repair Mortar is a cementitious, high‑strength, single‑component, polymer‑modified, structural repair mortar enhanced with silica fume for pour and pump applications. Packaging / SKU • 50 lb. bag (FX261) Color Dark gray Storage Store dry between 40–95°F (4–35°C) Shelf Life 1 year in unopened packaging CSI Specification 03 01 00 Maintenance of Concrete Where to Use • Full or partial-depth concrete repairs • On‑grade or below‑grade applications • Horizontal and formed vertical/ overhead applications • Tunnels, roads, balconies, parking decks, elevated structures Features • Pourable and pumpable • Normal set time • High bond strength • Excellent freeze/thaw resistance • Ready to use, just add potable water Yield • 0.50 ft.3 (0.014 m3 ) per 60 lb. (27.2 kg) bag Limitations • Do not apply to surfaces below 40°F (4°C) • Do not apply to surfaces above 90°F (32°C) • Minimum 1 in. (2.5 cm) application thickness • Do not mix partial bags • Avoid contact with aluminum surfaces FX‑32AEC High‑Performance Air‑Entrained Concrete Mix FX‑32AEC High‑Performance Air‑Entrained Concrete Mix is a single‑component concrete that incorporates a corrosion inhibitor, air entrainment and a high‑range water reducer for easy placement and workability. Packaging / SKU • 60 lb. bag (FX32AEC) • 3,000 lb. bulk bag (FX32AEC‑B3000) Color Gray Storage Store dry between 40–95°F (4–35°C) Shelf Life • 60 lb. bag: 1 year in unopened packaging • 3,000 bulk bag: 6 months in unopened packaging CSI Specification 03 01 00 Maintenance of Concrete
  • 15. 15F‑R‑PG13 ©2013 Simpson Strong‑Tie Company Inc. (800) 999-5099 | strongtie.com Repair, Protection and Strengthening Systems for Concrete and Masonry GeneralConcreteRepair REPAIR MORTARS Where to Use • Structural repair material for parking facilities, industrial plants, walkways, bridges, tunnels, dams and elevated structures • Vertical, horizontal and overhead repair • Above, below and on‑grade applications • Piers, sea walls and marine structures • Manholes, wet wells, water treatment facilities, sewers and lift stations Features • High‑early and ultimate strengths • Ideal for wet in-service environments • Silica fume enhanced for low permeability • Minimal rebound in low‑pressure spray applications • May be hand applied • Excellent freeze/thaw resistance • Available in bulk bags for jobsite efficiency • Ready to use, simply add potable water Yield • 0.45 ft.3 (0.013 m3 ) per 55 lb. (24.9 kg) Limitations • Do not apply to surfaces below 45°F (7°C) • Do not apply to surfaces above 90°F (32°C) • Minimum 3/8 in. (0.9 cm) application thickness • Maximum vertical lift thickness of 2 in. (5.1 cm); 1.5 in. (3.8 cm) overhead • Do not mix partial bags • Avoid contact with aluminum surfaces FX‑262 Sprayable Repair Mortar FX‑262 Sprayable Repair Mortar is a cementitious, single‑component, shrinkage‑compensated, fiber‑reinforced, silica fume‑enhanced, structural repair mortar with integral corrosion inhibitor designed for low‑pressure spray and trowel applications. Packaging / SKU • 55 lb. bag (FX262) • 55 lb. pail (FX262P) • 2,500 lb. bulk bag (FX262‑B2500) Color Dark gray Storage Store dry between 40–95°F (4–35°C) Shelf Life • 60 lb. bag: 1 year in unopened packaging • 2,500 bulk bag: 6 months in unopened packaging CSI Specification 03 01 00 Maintenance of Concrete Where to Use • Partial-depth concrete repairs • Above, below or on‑grade applications • Vertical and overhead applications • Tunnels, bridges, balconies, parking decks, elevated structures, water treatment facilities and marine structures Features • Ready to use, simply add potable water • Fiber‑reinforced • High early strength • Can be installed in lifts up to 3 in. (7.6 cm) vertically and 1.5 in. (3.8 cm) overhead • Excellent freeze/thaw resistance • Abrasion resistant • Low permeability Yield • 0.45 ft.3 (0.013 m3 ) per 50 lb. (22.7 kg) bag or pail Limitations • Do not apply to surfaces below 40°F (4°C) • Do not apply to surfaces above 90°F (32°C) • Not compatible with solvent- based curing compounds • Minimum 1/4 in. (0.6 cm) application thickness • Maximum 3 in. (7.6 cm) application thickness per lift • Do not mix partial bags • Avoid contact with aluminum surfaces FX‑263 Rapid‑Hardening Vertical/Overhead Repair Mortar FX‑263 Rapid‑Hardening Vertical/Overhead Repair Mortar is a cementitious, single‑component, fiber‑reinforced, polymer‑modified, silica fume‑enhanced, structural repair mortar with integral corrosion inhibitor designed for vertical and overhead applications. Available in regular and slow-setting (FX-263S) formulations. Packaging / SKU Standard Formulation: • 50 lb. bag (FX263) • 50 lb. pail (FX263P) Slow-Set Formulation: • 50 lb. bag (FX263S) • 50 lb. pail (FX263SP) Color Dark gray Storage Store dry between 40–95°F (4–35°C) Shelf Life 1 year in unopened packaging CSI Specification 03 01 00 Maintenance of Concrete
  • 16. 16 F‑R‑PG13 ©2013 Simpson Strong‑Tie Company Inc. (800) 999-5099 | strongtie.com Repair, Protection and Strengthening Systems for Concrete and Masonry GeneralConcreteRepair REPAIR MORTARS Where to Use • Partial or full‑depth concrete repairs • Above, below and on‑grade applications • Vertical and overhead applications • Tunnels, parking decks, marine structures, manholes, sewers, water treatment facilities • Ideal for large‑scale concrete repairs Features • Ready to use • Pre-mixed with sand • Can be wet or dry applied • Low rebound/less waste • Excellent finishing characteristics • Shrinkage compensated Yield • 0.45 ft.3 (0.013 m3 ) per 55 lb. (24.9 kg) bag Limitations • Do not apply to surfaces below 45°F (7°C) • Do not apply to surfaces above 90°F (32°C) • Minimum 1/4 in. (0.6 cm) application thickness • Maximum 6 in. (15.2 cm) thickness per lift • Do not mix partial bags • Avoid contact with aluminum surfaces FX‑288RTU Ready to use Shotcrete Mortar FX‑288RTU Ready to use Shotcrete Mortar is a cementitious, single‑component, micro silica‑enhanced, fiber‑reinforced, structural repair mortar with air entrainment designed for both wet and dry‑process shotcrete applications. Packaging / SKU • 55 lb. bag (FX288RTU) Color Dark gray Storage Store dry between 40–95°F (4–35°C) Shelf Life 1 year in unopened packaging CSI Specification 03 37 13 Shotcrete Where to Use • Partial or full‑depth concrete repairs • Above, below and on‑grade applications • Vertical and overhead applications • Tunnels, parking decks, marine structures, manholes, sewers, water treatment facilities • Ideal for large‑scale concrete repairs Features • Economical concentrate • Can be wet or dry applied • Low rebound/less waste • Excellent finishing characteristics reduce finish labor cost • Shrinkage compensated Yield • 1.45 ft.3 (0.04 m3 ) per 52 lb. (23.6 kg) when combined with 150 lb. (68 kg) of ASTM C 33 sand Limitations • Do not apply to surfaces below 45°F (7°C) • Do not apply to surfaces above 90°F (32°C) • Minimum 1/4 in. (0.6 cm) application thickness • Maximum 6 in. (15.2 cm) thickness per lift • Sand must meet ASTM C 33 requirements • Do not mix partial bags • Avoid contact with aluminum surfaces FX‑288 Shotcrete Mortar Concentrate FX‑288 Shotcrete Mortar is a cementitious, single‑component, micro silica‑enhanced, fiber‑reinforced, structural repair mortar concentrate with air entrainment designed for both wet‑ and dry‑process shotcrete applications. FX-288 requires 150 lb. (68 kg) ASTM C 33-compliant sand to be added per bag at the jobsite. Packaging / SKU • 52 lb. bag (FX288) Color Dark gray Storage Store dry between 40–95°F (4–35°C) Shelf Life 1 year in unopened packaging CSI Specification 03 37 13 Shotcrete
  • 17. 17F‑R‑PG13 ©2013 Simpson Strong‑Tie Company Inc. (800) 999-5099 | strongtie.com Repair, Protection and Strengthening Systems for Concrete and Masonry GeneralConcreteRepair REPAIR MORTARS Where to Use • Partial‑depth concrete repairs • Above, below and on‑grade applications • Vertical, horizontal and overhead applications • Corrosive environments • Manholes, sewers, and wastewater treatment facilities Features • Ready to use, simply add potable water • High early strength • Does not contain Portland cement • Excellent hydrogen sulfide resistance • Can be applied by hand or by low- pressure spray equipment Yield • 0.5 ft.3 (0.014 m3 ) per 60 lb. (27.2 kg) bag or pail Limitations • Do not apply to surfaces below 32°F (0°C) • Do not apply to surfaces above 90°F (32°C) • Minimum 1/2 in. (1.3 cm) application thickness • Maximum 2 in. (5.1 cm) application thickness per lift • Do not mix partial bags FX‑293 Calcium Aluminate Repair Mortar FX‑293 Calcium Aluminate Repair Mortar is a single‑component, fiber‑reinforced patching mortar designed for hydrogen sulfide resistance in corrosive wastewater applications. Packaging / SKU • 60 lb. bag (FX293) • 60 lb. pail (FX293P) Color Dark gray Storage Store dry between 40–95°F (4–35°C) Shelf Life 1 year in unopened packaging CSI Specification 03 01 00 Maintenance of Concrete Where to Use • Partial‑depth concrete repairs • On‑grade or below‑grade repairs • Horizontal and formed vertical/ overhead applications • Concrete paving repair, roads, bridges, parking structures, runways, overlays, and bridge joint nosing • In-service refrigeration and freezer floors • Post-tension closure pours and keyway grouting Features • Convenient pre‑measured system • Resistant to freeze/thaw cycles • Excellent resistance to sulfates, de‑icing chemicals and acids • Rapid‑curing • Extendable up to 100% by weight for deep patches/overlays • Cold weather patching as low as -15°F (-26°C) Yield • 0.5 ft.3 (0.014 m3 ) per FX826KT1-1 kit • 2.5 ft.3 (0.07 m3 ) per FX286KT5-5 kit Limitations • Do not apply to surfaces below -15°F (-26°C) • Do not apply to surfaces above 90°F (32°C) • Minimum 1/4 in. (0.6 cm) application thickness; maximum 2 in. (5.1 cm) neat • Installations over 2 in. (5.1 cm) thick must be extended between 50-100% with coarse, oven-dried aggregate • Maximum 6 in. (15.2 cm) thickness per lift • Apply only in well‑ventilated areas • Surfaces must be primed with FX‑826 Primer • Do not apply to damp or wet surfaces • Material is a vapor barrier after cure. Concrete surface must not exhibit an active moisture vapor drive. FX‑826 Polymer Mortar FX‑826 Polymer Mortar is a two‑component, flowable, rapid‑hardening, chemical‑resistant, methyl methacrylate (MMA) resin mortar designed for concrete repairs that require high early strength. Packaging / SKU 1 gallon kit (FX826KT1-1) contains: • 1 gallon can of Component “A” (FX826-1A) • (1) 60 lb. bag of Component “B” (FX826-B) 5 gallon (FX286KT5-5) contains: • 5 gallon pail of Component “A” (FX826-5A) • (5) 60 lb. bags of Component “B” (FX826-B) Color Dark tan Storage Store dry between 45–80°F (7–27°C) Shelf Life 3 months CSI Specification 03 01 00 Maintenance of Concrete
  • 18. 18 F‑R‑PG13 ©2013 Simpson Strong‑Tie Company Inc. (800) 999-5099 | strongtie.com Repair, Protection and Strengthening Systems for Concrete and Masonry GeneralConcreteRepair REPAIR MORTARS Where to Use • Partial and full‑depth concrete repairs • On‑grade or below‑grade repairs • Horizontal and formed vertical applications • Bridges, roadways, runways, parking decks, elevated structures, water treatment facilities, utilities, powerplants, industrial facilities Features • Ready to use, simply add potable water • High early strength • Excellent workability and finishing characteristics • Freeze/thaw resistant • Provides fast turnaround Yield • 0.5 ft.3 (0.014 m3 ) per 60 lb. (27.2 kg) bag Limitations • Do not apply to surfaces below 40°F (4°C) • Do not apply to surfaces above 90°F (32°C) • Minimum application thickness is 1 in. (2.5 cm) • Maximum installation depth is 6 in. (15.2 cm) • Do not mix partial bags • Avoid contact with aluminum surfaces FX‑928 Fast‑Setting Concrete Mix FX‑928 Fast Setting Concrete Mix is a single‑component, rapid‑hardening concrete mix with integral corrosion inhibitor designed for horizontal and formed vertical repairs where a quick turnaround with minimal downtime is required. Packaging / SKU • 60 lb. bag (FX928CON) • 3,000 lb. bulk bag (FX928CON‑B3000) Color Gray Storage Store dry between 40–95°F (4–35°C) Shelf Life • 60 lb. bag: 1 year in unopened packaging • 3,000 lb. bulk bag: 6 months in unopened packaging CSI Specification 03 01 00 Maintenance of Concrete Where to Use • Active leaking conditions such as bell and spigot joints or storm drains • Honeycomb patching in concrete • Used with injection products as a fast‑setting plug Features • Ready to use, simply add potable water • Fast‑setting repair mortar • May be placed in actively leaking conditions • Forms watertight seal to concrete and masonry base materials Yield • 0.45 ft.3 (0.013 m3 ) per 50 lb. (22.7 kg) bag Limitations • Do not apply to surfaces below 40°F (4°C) • Do not apply to surfaces above 90°F (32°C) • Avoid contact with aluminum surfaces FX‑922 Fast‑Setting Hydraulic Cement Mortar FX‑922 Fast‑Setting Hydraulic Cement Mortar is a rapid‑hardening mortar designed for stopping active leaks in concrete and general patching of concrete and masonry. Packaging / SKU • 50 lb. pail (FX922) Color Gray Storage Store dry between 40–95°F (4–35°C) Shelf Life 1 year in unopened packaging CSI Specification 03 01 00 Maintenance of Concrete
  • 19. 19F‑R‑PG13 ©2013 Simpson Strong‑Tie Company Inc. (800) 999-5099 | strongtie.com Repair, Protection and Strengthening Systems for Concrete and Masonry GeneralConcreteRepair REPAIR EPOXY Where to Use • Joint repairs • Mortar when combined with FX‑701 Graded Silica Filler for heavy‑traffic floor repairs • For vertical and overhead concrete patching • Vertical, horizontal and overhead crack sealing • Securing ports and paste over for pressure injection applications • As a jacket joint sealer and top‑bevel material for the FX‑70® Structural Repair and Protection System Features • Bonds well to most construction materials • Bonds to dry or damp surfaces • Easily applied with trowel or putty knife • Can be feather edged Yield • 231 in.3 /gal. (0.001 m3 /L) neat • 350 in.3 /gal. (0.0015 m3 /L) when mixed 1 part by volume with FX-701 Oven-Dried Graded Silica Filler Limitations • Do not apply to surfaces below 40°F (4°C) • Do not apply to surfaces above 90°F (32°C) • 1 in. (2.5 cm) maximum lift thickness for vertical and overhead repairs • Material is a vapor barrier after cure. Concrete surface must not exhibit an active moisture vapor drive. • Adhesion and product compatibility testing must be performed prior to over‑coating existing coatings • Product may discolor if exposed to direct sunlight • Not recommended for large exterior repairs or applications subject to large thermal change • Not for use as a structural anchoring adhesive • Do not exceed one part by volume FX‑701 Graded Silica Filler for mortar mixes Please note: This product has not been evaluated for resisting long-term sustained loads in anchor applications. Refer to the current Anchoring and Fastening Systems for Concrete and Masonry catalog or www.strongtie.com for code-listed structural anchoring adhesives. FX‑763 Low‑Modulus Trowel‑Grade Epoxy FX‑763 Low‑Modulus Trowel‑Grade Epoxy is a two‑component, 100% solids, moisture‑tolerant, non‑sag epoxy designed for vertical, horizontal, and overhead applications and uses. Specification Compliance FX‑763 exceeds the performance requirements of ASTM C 881, Type I, Grade 3, Class B. Packaging / SKU • 3 gallon kit (FX763KT3) • 15 gallon kit (FX763KT15) Color Mixed Epoxy: Gray Mixing Ratio 2A:1B Storage Store dry between 40–95°F (4–35°C) Shelf Life 2 years in unopened packaging CSI Specification 03 01 00 Maintenance of Concrete
  • 20. 20 F‑R‑PG13 ©2013 Simpson Strong‑Tie Company Inc. (800) 999-5099 | strongtie.com Repair, Protection and Strengthening Systems for Concrete and Masonry GeneralConcreteRepair ADMIXTURES Where to Use • Admixture in concrete mixes where increased slump and workability are desired • Admixture in grout mixes where increased fluidity and minimized shrinkage are desired Features • Improves flowability and workability • Increases initial set time • Contains no calcium chloride, salt, sugar or foaming agents Application Rate • 1/2 to 1 lb. (0.23 to 0.45 kg) of powder or 16-32 fl. oz. (0.45-0.9 L) per 100 lb. (45.4 kg) of cement Limitations • Protect FX‑32CA Liquid from freezing; discard if freezing occurs • Do not exceed recommended dosage rates FX‑32CA High‑Range Water Reducer FX‑32CA Catalytic Agent is a high‑range water‑reducing admixture for Portland cement‑based grouts, mortars and concrete mixes. FX‑32CA allows up to 25% reduction in mix water while maintaining excellent workability and increased set time. Available as a powder or liquid. Specification Compliance FX‑32CA exceeds the performance requirements of ASTM C 494 Type F. Packaging / SKU Powder: • 30 lb. pail (FX32CAP-30P) • 300 lb. drum (FX32CAP-300D) Liquid: • 1 gallon pail (FX32CAL-1) • 5 gallon pail (FX32CAL-5) • 55 gallon drum (FX32CAL-55) Storage Store dry between 40– 95°F (4–35°C). Protect liquid from freezing. Shelf Life 1 year in unopened packaging CSI Specification 03 30 00 Cast-in-Place Concrete Where to Use • As a concrete or grout admixture where increased strength, abrasion resistance and reduced permeability are desired • Where low‑permeability concrete is required • Marine applications, bridge decks, parking decks, grouting • For overlay applications Features • Increases compressive and flexural strength • Reduces permeability • Increases abrasion resistance Application Rate • 1.5–2.5 gallons (5.7–9.5 L) per 100 lbs. (45.4 kg) of cement Limitations • The use of an air-entraining agent is highly recommended in areas where freeze/ thaw conditions may be experienced • For best results, add FX‑32SFA on‑site. In‑transit conditions may adversely affect the performance of FX‑32SFA. • Protect FX‑32SFA from freezing. Discard if freezing occurs • Do not exceed recommended dosage rates FX‑32SFA Micro Silica Fume Admixture FX‑32SFA Micro Silica Fume Admixture is a high‑performance concrete and grout admixture designed to increase compressive and flexural strength, improve abrasion resistance and reduce permeability in concrete and grout mixes. Specification Compliance FX‑32SFA exceeds the performance requirements of ASTM C 1240. Packaging / SKU • 1 gallon pail (FX32SFLIQUID‑1) • 5 gallon pail (FX32SFLIQUID‑5) Storage Store dry between 40–95°F (4–35°C). Protect from freezing Shelf Life 2 years in unopened packaging CSI Specification 03 30 00 Cast-in-Place Concrete
  • 21. 21F‑R‑PG13 ©2013 Simpson Strong‑Tie Company Inc. (800) 999-5099 | strongtie.com Repair Crack EPOXY – LOW-VISCOSITY Where to Use • Pressure injection of static cracks up to 1/4 in. (6.4 mm) • For underwater pressure- injection applications • As a binder for cold‑weather anchor and base plate grouting Features • Structural formulation • Applications as low as 30° (‑1°C) • Low-viscosity over a wide temperature range • Can be used with metered pressure-injection equipment Yield • 231 in.3 /gal. (0.001 m3 /L) neat • 300–600 in.3 /gal. (0.0013–0.0026 m3 /L) when mixed 1-3 parts by volume with FX-701 Oven-Dried Graded Silica Filler Limitations • Do not apply to surfaces below 30°F (1°C) • Do not apply to surfaces above 80°F (27°C) • Material is a vapor barrier after cure. When used as a grout, concrete surface must not exhibit an active moisture vapor drive. • For use in non‑moving cracks only Limitations (cont’d) • Not for use in actively leaking or seeping cracks. Remove active hydrostatic pressure before attempting injection. • For cracks wider than ¼ in. (0.6 cm), consult a qualified engineer • Product may discolor if exposed to direct sunlight • Not recommended for large exterior repairs or applications subject to large thermal change when used as a repair mortar • When used as a base plate grout or repair mortar, minimum application thickness is 1/2 in. (1.3 cm). Maximum installation depth is 3 in. (7.6 cm) • Epoxy grouts can crack due to thermal stress. Do not form more than 4 in. (10.2 cm) beyond the plate to limit thermal cracking. • When used as a binder, use FX‑701 Oven‑Dried, Graded Silica Filler to prevent encapsulating moisture Please note: This product has not been evaluated for resisting long-term sustained loads in anchor applications. Refer to the current Anchoring and Fastening Systems for Concrete and Masonry catalog or www.strongtie.com for code-listed structural anchoring adhesives. FX‑741LV Low‑Viscosity Cold‑Weather Structural Epoxy FX‑741LV Low‑Viscosity Cold‑Weather Structural Epoxy is a fast‑setting, two‑component, 100% solids, moisture‑tolerant structural epoxy designed for pressure injection of cracks and as a grout binder in low‑temperature applications. Specification Compliance FX‑741LV exceeds the performance requirements of ASTM C 881, Type I and IV, Grade 1, Class A and B. Packaging / SKU • 15 oz. side-by- side dual cartridge (FX741LVCTG) • 3 gallon kit (FX741LVKT3) • 15 gallon kit (FX741LVKT15) • 150 gallon kit (FX741LVKT150) Color Mixed Epoxy: Straw Mixing Ratio 2A:1B Mixed Viscosity • 1,800 cps at 40°F (4°C) • 500 cps at 70°F (21°C) Storage Store dry between 40–95°F (4–35°C) Shelf Life 2 years in unopened packaging CSI Specification 03 01 00 Maintenance of Concrete
  • 22. 22 F‑R‑PG13 ©2013 Simpson Strong‑Tie Company Inc. (800) 999-5099 | strongtie.com Repair, Protection and Strengthening Systems for Concrete and Masonry EPOXY – LOW-VISCOSITY CrackRepair Where to Use • Pressure injection of static cracks up to 1/4 in. (0.6 cm) • Underwater pressure injection • As a binder for anchor and base plate grouting Features • Structural formulation • Low viscosity • Moisture tolerant, can be used on dry and damp (SSD) surfaces • Can be used with metered pressure-injection equipment Yield • 231 in.3 /gal. (0.001 m3 /L) neat • 300–600 in.3 /gal. (0.0013–0.0026 m3 /L) when mixed 1-3 parts by volume with FX-701 Oven-Dried Graded Silica Filler Limitations • Do not apply to surfaces below 40°F (4°C) • Do not apply to surfaces above 90°F (32°C) • Material is a vapor barrier after cure. When used as a grout, concrete surface must not exhibit an active moisture vapor drive. • For use in non‑moving cracks only • Not for use in actively leaking or seeping cracks. Remove active hydrostatic pressure before attempting injection. • For cracks wider than ¼ in. (0.6 cm), consult a qualified engineer • Not recommended for large exterior repairs or applications subject to large thermal change when used as a repair mortar • Product may discolor if exposed to direct sunlight • Not recommended for use as a mortar for repairs subject to large thermal change • When used as a base plate grout or repair mortar, minimum application thickness is 1/2 in. (1.3 cm). Maximum installation depth is 3 in. (7.6 cm) • Epoxy grouts can crack due to thermal stress. Do not form more than 4 in. (10.2 cm) beyond the plate to limit thermal cracking • When used as a binder, use FX‑701 Oven‑Dried, Graded Silica Filler to prevent encapsulating moisture Please note: This product has not been evaluated for resisting long-term sustained loads in anchor applications. Refer to the current Anchoring and Fastening Systems for Concrete and Masonry catalog or www.strongtie.com for code-listed structural anchoring adhesives. FX‑751LV Low‑Viscosity Structural Injection Epoxy FX‑751LV Low‑Viscosity Structural Injection Epoxy is a two‑component, 100% solids, moisture‑tolerant, structural epoxy designed for pressure injection of concrete cracks. Specification Compliance FX‑751LV exceeds the performance requirements of ASTM C 881, Type I and IV, Grade 1, Class B. Packaging / SKU • 15 oz. side‑by‑side dual cartridge (FX751LVCTG) • 3 gallon kit (FX751LVKT3) • 15 gallon kit (FX751LVKT15) • 150 gallon kit (FX751LVKT150) Color Mixed Epoxy: Light Straw Mixing Ratio 2A:1B Mixed Viscosity 800 cps at 72°F (22°C) Storage Store dry between 40–95°F (4–35°C) Shelf Life 2 years in unopened packaging CSI Specification 03 01 00 Maintenance of Concrete
  • 23. 23F‑R‑PG13 ©2013 Simpson Strong‑Tie Company Inc. (800) 999-5099 | strongtie.com Repair, Protection and Strengthening Systems for Concrete and Masonry EPOXY – LOW-VISCOSITY CrackRepair Where to Use • Pressure injection of static cracks up to 1/4 in. (0.6 cm) • Underwater pressure injection • Gravity‑feed flood‑coat crack filling on horizontal decks • As a binder for anchor and base plate grouting Features • Structural formulation • Super‑low viscosity • Moisture tolerant, can be used on dry and damp (SSD) surfaces • Penetrates hairline cracks as small as 0.002 in. (0.05 mm) • Can be applied by squeegee or roller for flood‑coat applications • Can be used with metered pressure injection equipment Application Rate/Yield • 231 in.3 /gal. (0.001 m3 /L) neat • 300–600 in.3 /gal. (0.0013–0.0026 m3 /L) when mixed 1-3 parts by volume with FX-701 Oven-Dried Graded Silica Filler • For flood-coat applications: 150–200 ft.2 /gal. (3.6–4.9 m2 /L) depending on surface profile and porosity Limitations • Do not apply to surfaces below 40°F (4°C) • Do not apply to surfaces above 90°F (32°C) • Material is a vapor barrier after cure. When used as a grout or coating, concrete surface must not exhibit an active moisture vapor drive. • Not for use on exterior slab on- grade coating applications • For use in non‑moving cracks only • Product may discolor if exposed to direct sunlight • Not for use in actively leaking or seeping cracks. Remove active hydrostatic pressure before attempting injection. • Not recommended for large exterior repairs or applications subject to large thermal change when used as a repair mortar • For cracks wider than ¼ in. (0.6 cm), consult a qualified engineer • When used as a base plate grout or repair mortar, minimum application thickness is 1/2 in. (1.3 cm). Maximum installation depth is 3 in. (7.6 cm) • When used as a binder, use FX‑701 Oven‑Dried, Graded Silica Filler to prevent encapsulating moisture • Epoxy grouts can crack due to thermal stress. Do not form more than 4 in. (10.2 cm) beyond the plate to limit thermal cracking Please note: This product has not been evaluated for resisting long-term sustained loads in anchor applications. Refer to the current Anchoring and Fastening Systems for Concrete and Masonry catalog or www.strongtie.com for code-listed structural anchoring adhesives. FX‑770SLV Super Low Viscosity Structural Epoxy FX‑770SLV Super Low Viscosity Structural Epoxy is a two‑component, 100% solids, moisture‑tolerant epoxy designed for pressure injection of concrete cracks, gravity‑feed flood‑coat crack filling applications and grout binder. Specification Compliance FX‑770SLV exceeds the performance requirements of ASTM C 881, Type I and IV, Grade 1, Class B. Packaging / SKU • 15 fl. oz. side‑by‑side dual cartridge (FX770SLVCTG) • 3 gallon kit (FX770SLVKT3) • 15 gallon kit (FX770SLVKT15) • 150 gallon kit (FX770SLVKT150) Color Mixed Epoxy: Light Amber Mixing Ratio 2A:1B Mixed Viscosity 150 cps at 75°F (24°C) Storage Store dry between 40–95°F (4–35°C) Shelf Life 2 years in unopened packaging CSI Specification 03 01 00 Maintenance of Concrete
  • 24. 24 F‑R‑PG13 ©2013 Simpson Strong‑Tie Company Inc. (800) 999-5099 | strongtie.com Repair, Protection and Strengthening Systems for Concrete and Masonry CrackRepair EPOXY – LOW-VISCOSITY Where to Use • Pressure injection of static cracks up to 1/4 in. (0.6 cm) • Underwater pressure-injection • Gravity‑feed flood‑coat crack filling on horizontal decks • As a binder for anchor and base plate grouting Features • Low viscosity • Moisture tolerant, can be used on dry and damp (SSD) surfaces • High‑strength formulation • Can be applied by squeegee or roller for flood‑coat applications • Can be used with metered pressure-injection equipment Yield • 231 in.3 /gal. (0.001 m3 /L) neat • 300–600 in.3 /gal. (0.0013–0.0026 m3 /L) when mixed 1-3 parts by volume with FX-701 Oven-Dried Graded Silica Filler • For flood-coat applications: 150–200 ft.2 /gal. (3.6–4.9 m2 /L) depending on surface profile and porosity Limitations • Do not apply to surfaces below 40°F (4°C) • Do not apply to surfaces above 90°F (32°C) • Material is a vapor barrier after cure. When used as a grout or coating, concrete surface must not exhibit an active moisture vapor drive. • Not for use on exterior slab on- grade coating applications • Not recommended for large exterior repairs or applications subject to large thermal change when used as a repair mortar • For use in non‑moving cracks only • Not for use in actively leaking or seeping cracks. Remove active hydrostatic pressure before attempting injection. • For cracks wider than ¼ in. (0.6 cm), consult a qualified engineer • Product may discolor if exposed to direct sunlight • When used as a base plate grout or repair mortar, minimum application thickness is 1/2 in. (1.3 cm). Maximum installation depth is 3 in. (7.6 cm). • When used as a binder, use FX‑701 Oven‑Dried, Graded Silica Filler to prevent encapsulating moisture • Epoxy grouts can crack due to thermal stress. Do not form more than 4 in. (10.2 cm) beyond the plate to limit thermal cracking Please note: This product has not been evaluated for resisting long-term sustained loads in anchor applications. Refer to the current Anchoring and Fastening Systems for Concrete and Masonry catalog or www.strongtie.com for code-listed structural anchoring adhesives. FX‑771LV Low‑Viscosity High‑Modulus Epoxy FX‑771LV Low‑Viscosity High‑Modulus Epoxy is a two‑component, 100% solids, moisture‑tolerant epoxy designed for gravity‑feed flood‑coat or pressure injection of concrete cracks and a grout binder. Specification Compliance FX‑771LV exceeds the performance requirements of ASTM C 881, Type I, Grade 1, Class B. Packaging / SKU • 15 fl. oz. side‑by‑side dual cartridge (FX771LVCTG) • 3 gallon kit (FX771LVKT3) • 15 gallon kit (FX771LVKT15) • 150 gallon kit (FX771LVKT150) Color Mixed Epoxy: Light Amber Mixing Ratio 2A:1B Mixed Viscosity 350 cps at 75°F (24°C) Storage Store dry between 40–95°F (4–35°C) Shelf Life 2 years in unopened packaging CSI Specification 03 01 00 Maintenance of Concrete
  • 25. 25F‑R‑PG13 ©2013 Simpson Strong‑Tie Company Inc. (800) 999-5099 | strongtie.com Repair, Protection and Strengthening Systems for Concrete and Masonry CrackRepair EPOXY – LOW-VISCOSITY Where to Use • Pressure injection of static cracks up to 1/4 in. (0.6 cm) (0.6 cm) • Gravity‑feed flood‑coat crack filling on horizontal decks • For underwater pressure-injection • As a binder for anchor and base plate grouting Features • Low viscosity • Moisture tolerant, can be used on dry and damp (SSD) surfaces • Extended working time permits deep penetration of cracks and porous surfaces • High-strength formulation • Can be applied by squeegee, broom or roller for gravity-feed flood-coat applications • Can be used with metered pressure injection equipment Yield • 231 in.3 /gal. (0.001 m3 /L) neat • 300–600 in.3 /gal. (0.0013–0.0026 m3 /L) when mixed 1-3 parts by volume with FX-701 Oven-Dried Graded Silica Filler • For flood-coat applications: 150–200 ft.2 /gal. (3.6–4.9 m2 /L) depending on surface profile and porosity Limitations • Do not apply to surfaces below 60°F (15°C) • Do not apply to surfaces above 110°F (43°C) • Material is a vapor barrier after cure. When used as a grout or coating, concrete surface must not exhibit an active moisture vapor drive. • Not for use on exterior slab on- grade coating applications • For use in non-moving static cracks only • Not for use in actively leaking or seeping cracks. Remove active hydrostatic pressure before attempting injection. • For cracks wider than 1/4 in. (0.6 cm), consult a qualified engineer • Not recommended for large exterior repairs or applications subject to large thermal change when used as a repair mortar • Product may discolor if exposed to direct sunlight • When used as a base plate grout or repair mortar, minimum application thickness is 1/2 in. (1.3 cm). Maximum installation depth is 3 in. (7.6 cm). • When used as a binder, use FX‑701 Oven‑Dried, Graded Silica Filler to prevent encapsulating moisture • Epoxy grouts can crack due to thermal stress. Do not form more than 4 in. (10.2 cm) beyond the plate to limit thermal cracking. Please note: This product has not been evaluated for resisting long-term sustained loads in anchor applications. Refer to the current Anchoring and Fastening Systems for Concrete and Masonry catalog or www.strongtie.com for code-listed structural anchoring adhesives. FX‑791LVLPL Low-Viscosity Long Pot Life Epoxy FX‑791LVLPL Low-Viscosity Long Pot Life Epoxy is a two-component, 100% solids, moisture- tolerant, long pot life epoxy designed for pressure injection of concrete cracks, gravity-feed flood-coat crack filling applications, and as a grout binder for warm weather applications. Specification Compliance FX‑791LVLPL exceeds the performance requirements of ASTM C 881, Type I, Grade 1, Class C. Packaging / SKU • 3 gallon kit (FX791LVLPLKT3) • 15 gallon kit (FX791LVLPLKT15) • 150 gallon kit (FX791LVLPLKT150) Color Mixed Epoxy: Light Amber Mixing Ratio 2A:1B Mixed Viscosity 400 cps at 75°F (24°C) Storage Store dry between 40–95°F (4–35°C) Shelf Life 2 years in unopened packaging CSI Specification 03 01 00 Maintenance of Concrete
  • 26. 26 F‑R‑PG13 ©2013 Simpson Strong‑Tie Company Inc. (800) 999-5099 | strongtie.com Repair, Protection and Strengthening Systems for Concrete and Masonry CrackRepair EPOXY – GEL Where to Use • Threaded rod, rebar, dowel and pin anchoring • Securing ports and paste over for pressure-injection applications • Vertical and horizontal crack sealing • Pressure injection in cracks over 1/8 in. (0.3 cm) • Pick‑proof sealant Features • Gel viscosity • Moisture tolerant, can be used on dry and damp (SSD) surfaces • Can be feather edged • Excellent chemical resistance to petroleum products and wastewater exposure • Excellent resistance to freeze/thaw cycles Yield • 231 in.3 /gal. (0.001 m3 /L) neat • 36 in.3 (0.0006 m3 ) per cartridge Limitations • Do not apply to surfaces below 40°F (4°C) • Do not apply to surfaces above 90°F (32°C) • For use in non‑moving cracks only • Not for use in actively leaking or seeping cracks. Remove active hydrostatic pressure before attempting injection. • For cracks wider than ¼ in. (0.6 cm), consult a qualified engineer • Product may discolor if exposed to direct sunlight Please note: This product has not been evaluated for resisting long-term sustained loads in anchor applications. Refer to the current Anchoring and Fastening Systems for Concrete and Masonry catalog or www.strongtie.com for code-listed structural anchoring adhesives. FX‑715 Epoxy Gel FX‑715 Epoxy Gel is a gel‑viscosity, two‑component, high‑solids, moisture‑tolerant, thixotropic epoxy designed for pressure injection of concrete cracks. FX‑715 is suitable for vertical and horizontal crack sealing, securing injection ports, anchoring, doweling, and general concrete repair applications. Specification Compliance FX‑715 exceeds the performance requirements of ASTM C 881 Type I, Grade 3, Class B. Packaging / SKU • 20 oz. side‑by‑side dual cartridge (FX715CTG) • 2 gallon kit (FX715KT2) • 10 gallon kit (FX715KT10) • 100 gallon kit (FX715KT100) Color Mixed: Gray Mixing Ratio 1A:1B Storage Store dry between 40–95°F (4–35°C) Shelf Life 2 years in unopened packaging CSI Specification 03 01 00 Maintenance of Concrete
  • 27. 27F‑R‑PG13 ©2013 Simpson Strong‑Tie Company Inc. (800) 999-5099 | strongtie.com Repair, Protection and Strengthening Systems for Concrete and Masonry CrackRepair METHYL METHACRYLATE Where to Use • Concrete sealer • Gravity‑feed flood‑coat crack sealing • Exterior and unoccupied interior applications • Bridge decks, roads, floors, parking structures, in‑service refrigeration and freezer flooring Features • Fast-curing • Warm and cold weather formulations available • Application temperature as low as 40°F (4°C) for standard formulation, -20°F (-29°C) for winter formulation • Super‑low viscosity • Can be applied by spray, squeegee, broom or roller • UV‑resistant when cured Application Rate • For flood-coat applications: 100 ft.2 /gal. (2.5 m2 /L), depending on surface profile and porosity Limitations • Minimum installation temperature is 40°F (4°C) for standard formulation, ‑20°F (‑29°C) for winter formulation • Maximum installation temperature is 100°F (37°C) for standard formulation and 80°F (26°C) for winter “W” formulation • Surface must be completely dry prior to application • Apply only in well‑ventilated areas • For horizontal use only • For use in non-moving cracks only • When used neat, maximum crack width is 1/8 in. (0.3 cm). Extended with FX‑701 Oven-Dried Graded Silica Filler, maximum crack width is 1/4 in. (0.6 cm). • Material is a vapor barrier after cure. Concrete surface to receive coating must not exhibit an active moisture vapor drive. • FX‑821MMA is designed to penetrate, but will leave a slight gloss finish that will wear over time FX‑821MMA Super Low Viscosity Methyl Methacrylate Resin FX‑821MMA Super Low Viscosity Methyl Methacrylate Resin is a two‑component, fast‑curing, methyl methacrylate (MMA) resin designed for densifying porous concrete and for gravity‑feed flood‑coat treatment of concrete cracks as small as 0.002 in. (0.05 mm). FX‑821MMA is available in both standard and fast‑setting winter “W” versions for cold weather applications. Packaging / SKU Standard Formulation • 1 gallon kit (FX821MMAKT1) • 5 gallon kit (FX821MMAKT5) • 50 gallon kit (FX821MMAKT50) Winter Formulation • 1 gallon kit (FX821WMMAKT1) • 5 gallon kit (FX821WMMAKT5) • 50 gallon kit (FX821WMMAKT50) Color Clear Mixing Ratio Pre-proportioned kit. Use entire contents of all components. Viscosity 6 cps at 75°F (24°C) Storage Store dry between 40–80°F (4–27°C) Shelf Life 6 months in unopened packaging CSI Specification 07 18 00 Concrete Rehabilitation
  • 28. 28 F‑R‑PG13 ©2013 Simpson Strong‑Tie Company Inc. (800) 999-5099 | strongtie.com Repair, Protection and Strengthening Systems for Concrete and Masonry CrackRepair ETI CARTRIDGE SOLUTIONS ETI‑SLV Super‑Low Viscosity Injection Epoxy is a two‑component, high‑solids epoxy formulated for structural repair of cracks in concrete ranging from hairline to 1 ⁄4 in. (6 mm) in width. At 350 cps (mixed), ETI‑SLV may be gravity‑fed or pressure injected with E‑Z‑Click™ injection ports. ETI‑SLV cures to a uniform black color, is packaged in 16 oz. (475 mL) side‑by‑side dual cartridges that includes an Opti‑Mix static mixing nozzle and exceeds the performance requirements of ASTM C 881 Type I and IV, Grade 1, Class B. Uses: Structural repair of cracked concrete, waterproof sealant, suitable for dry or damp (non‑flowing) repairs. ETI‑SLV Super‑Low Viscosity Injection Epoxy ETI‑LV22 Low-Viscosity Injection Epoxy ETI‑LV Low‑Viscosity Injection Epoxy is a two‑component, high‑solids epoxy formulated for structural repair of cracks in concrete ranging from 1 ⁄64 in. (0.4 mm) to 1 ⁄4 in. (6 mm) in width. ETI‑LV has a mixed viscosity of 1,750 cps, may be gravity‑fed or pressure injected with E‑Z‑Click™ injection ports, and is suitable for use in potable water applications. ETI‑LV cures to a uniform amber color, is packaged in 22 oz. (650 mL) side‑by‑side dual cartridges that includes an Opti‑Mix static mixing nozzle, and exceeds the performance requirements of ASTM C 881 Type I and IV, Grade 1, Classes B & C; NSF/ ANSI Standard 61 (22 in.2 ⁄ 1000 gal.). Uses: Structural repair of cracked concrete, waterproof sealant, suitable for dry or damp (non‑flowing) repairs. ETI‑GV Gel‑Viscosity Injection Epoxy is a two‑component, high‑solids epoxy formulated for structural repair of cracks in concrete ranging from 3 ⁄32 in. (2.4 mm) to ¼ in. (6 mm) in width. ETI‑LV has a gel viscosity that reduces under pressure for increased flowability, and may be gravity‑fed or pressure injected with E‑Z‑Click™ injection ports. ETI‑GV cures to a uniform grey color, is packaged in 22 oz. (650 mL) side‑by‑side dual cartridges that include an Opti‑Mix static mixing nozzle, and exceeds the performance requirements of ASTM C 881 Type I and IV, Grade 3, Classes B & C. Uses: Structural repair of cracked concrete, waterproof sealant, suitable for dry or damp (non‑flowing) repairs. ETI‑GV22 Gel-Viscosity Injection Epoxy CIP is a fast‑curing, two‑part epoxy paste‑over material. It is used to seal cracks and to secure injection ports over concrete prior to epoxy or urethane foam injection repair. CIP sets up rigid and can either be left on the concrete or ground or chiseled off at the completion of a crack injection job. Packaged in 22 oz. (650 mL) side‑by‑side dual cartridges that include a static mixing nozzle. CIP Paste Over CIP‑F is a flexible, peelable and fast‑curing polyurea paste‑over material. It is used to temporarily seal cracks and to secure injection ports over concrete prior to epoxy or urethane foam injection repair. CIP‑F can be peeled off at the completion of a crack injection job by pulling on starter tabs placed under the lead edge surface at the time of application or by prying under the paste‑over. Packaged in 22 oz. (650 mL) side‑by‑side dual cartridges that include a static mixing nozzle. CIP‑F Peelable Paste Over PASTE-OVER ADHESIVES
  • 29. 29F‑R‑PG13 ©2013 Simpson Strong‑Tie Company Inc. (800) 999-5099 | strongtie.com Repair, Protection and Strengthening Systems for Concrete and Masonry CrackRepair ETI ACCESSORIES The Opti‑Mix® static mixing nozzle is specifically designed for crack injection epoxies and ensures thorough mixing of epoxy components. For use with both low‑viscosity and gel‑viscosity ETI formulations. Flow regulators ensure that resin and hardener flow at equal rates and prevent mixed epoxy from flowing back out of the nozzle into the cartridge. This ensures thorough mixing and prevents mixed product from curing in the neck of the cartridge, causing blockage. EMNO22 Opti‑Mix® Mixing Nozzle E‑Z‑Click™ Injection System The E‑Z‑Click injection system is comprised of a specially designed fitting and ports that take the mess out of your repair project while allowing you to work faster. The E‑Z‑Click injection fitting installs onto the end of the Opti‑Mix mixing nozzle and clicks onto the E‑Z‑Click™ ports during injection. Maximum installation pressure of 150 psi. • Positive connection eliminates messy leakage, minimizing waste and clean‑up • No drilling of ports: E‑Z‑Click ports perform while pasted to the surface of the concrete. No drilling required for most applications • Disconnect the fitting from the E‑Z‑Click part and the epoxy stops flowing, no leaky mess • After injecting, pull the head of the E‑Z‑Click port out to close it and prevent leakage • One person can work faster without having to hold the tube on the port EDT22S Manual Dispensing Tool for 1:1 and 2:1 Adhesive Cartridges The EDT22S epoxy adhesive tool features a steel carriage and is engineered for high-volume, continuous use. The tool can be easily converted from dispensing a 20 or 22 oz. (570 or 650 mL) 1:1 ratio cartridge to a 16 oz. (475 mL) 2:1 ratio cartridge. EDTA22P Pneumatic Dispensing Tool for 20 and 22 oz. Adhesive Cartridges The EDTA22P tool features an optional suitcase handle adapter for the ultimate in tool configuration and dispensing convenience. The suitcase option enables easier and time-saving ground-level doweling. The heavy-duty tool comes with a custom, blow-molded plastic carrying case.
  • 30. 30 F‑R‑PG13 ©2013 Simpson Strong‑Tie Company Inc. (800) 999-5099 | strongtie.com Injection Non‑Structural Where to Use • Sealing water leaks above and below-grade • Pressure-injection water stopping • Foundations, tunnels, manholes, tanks, sewer pipe joints, dams, mines, reservoirs Features • Expands up to 7 times original volume unrestricted • Non flammable • Can be injected by manual pumps or high‑pressure injection equipment • Gel time can be accelerated with the addition of FX-Accelerator • Non corrosive Limitations • Do not apply to surfaces below 40°F (4°C) • Do not apply to surfaces above 90°F (32°C) • Product will discolor if exposed to direct sunlight • Resistance to in‑service chemical exposure must be confirmed for compatibility prior to application • FX‑3 JETSET is extremely sensitive to moisture. Keep containers tightly closed to prevent moisture from coming into contact with the material as very small amounts can begin the reaction process. • JETSET products are packed under a nitrogen blanket to prevent contact with atmospheric moisture. Once the original packaging has been opened, shelf life can be expected to be significantly reduced. Do not open containers until ready to use and close immediately to protect remaining contents. • Do not exceed 10% by volume addition of FX‑Accelerator FX‑3 JETSET Hydrophilic Polyurethane Injection Grout FX‑3 JETSET is a low‑viscosity, single‑component, moisture‑activated, TDI‑hydrophilic, expanding polyurethane grout designed to stop and prevent water leaks. FX‑3 JETSET reacts with water and expands to form flexible closed‑cell waterproof foam that prevents water infiltration through cracks in concrete. Packaging / SKU • 20 fl. oz. side-by- side dual cartridge (FX3JETSET-CTG) • 1 quart can (FX3JETSET-QT) • 1 gallon can (FX3JETSET‑1) • 5 gallon pail (FX3JETSET‑5) • 50 gallon drum (FX3JETSET‑50) Color Light yellow Viscosity 750 +/- 250 cps at 75°F (24°C) Storage Store dry between 40–95°F (4–35°C) Shelf Life 1 year in unopened packaging CSI Specification 03 64 00 Injection Grouting
  • 31. 31F‑R‑PG13 ©2013 Simpson Strong‑Tie Company Inc. (800) 999-5099 | strongtie.com Repair, Protection and Strengthening Systems for Concrete and Masonry Non‑StructuralInjection NON‑STRUCTURAL INJECTION Where to Use • Sealing water leaks above and below-grade • Pressure-injection water stopping • Foundations, tunnels, manholes, tanks, sewer pipe joints, dams, mines, reservoirs Features • Expands up to 5 times original volume unrestricted • Non flammable • Variable gel times with the addition of FX‑Accelerator • Can be injected by manual pumps or high‑pressure injection equipment • Very low shrinkage in cured state Limitations • Do not apply to surfaces below 40°F (4°C) • Do not apply to surfaces above 90°F (32°C) • Product will discolor if exposed to direct sunlight • Resistance to in‑service chemical exposure must be confirmed for compatibility prior to application • FX‑5 JETSET is extremely sensitive to moisture. Keep containers tightly closed to prevent moisture from coming into contact with the material as very small amounts can begin the reaction process. • JETSET products are packed under a nitrogen blanket to prevent contact with atmospheric moisture. Once the original packaging has been opened, shelf life can be expected to be significantly reduced. Do not open containers until ready to use and close immediately to protect remaining contents. • Proper use of FX‑5 JETSET requires a minimum of 1% by volume addition of FX‑Accelerator to properly react. Do not exceed 10% by volume. FX‑5 JETSET Hydrophobic Polyurethane Injection Grout FX‑5 JETSET is a low‑viscosity, two‑component, MDI‑hydrophobic, expanding polyurethane grout designed to stop and prevent water leaks. FX‑5 JETSET reacts in the presence of water and expands to form a flexible closed‑cell waterproof foam that prevents water infiltration. Packaging / SKU 5 gallon kit (FX5JETSETKT5.25) contains: • 5 gallon pail (FX5JETSET-5) • 1 quart can of FX‑JETSET Accelerator (FXJETACC-QT) Color Light Yellow Viscosity 1,050 +/- 200 cps at 75°F (24°C) Storage Store dry between 40–95°F (4–35°C) Shelf Life 1 year in unopened packaging CSI Specification 03 64 00 Injection Grouting
  • 32. 32 F‑R‑PG13 ©2013 Simpson Strong‑Tie Company Inc. (800) 999-5099 | strongtie.com Repair, Protection and Strengthening Systems for Concrete and Masonry Non‑StructuralInjection NON‑STRUCTURAL INJECTION Where to Use • Sealing water leaks above and below-grade • Pressure-injection water stopping • Foundations, tunnels, manholes, tanks, sewer pipe joints, mines Features • Non‑expanding flexible gel • Variable set times with the addition of FX‑Accelerator • Non flammable • Suitable for use in wet or submerged environments • Can be injected by manual pumps or high‑pressure injection equipment • Super-low viscosity material for maximum penetration • Very-low shrinkage when dry • For use in both static and dynamic cracks Limitations • Do not apply to surfaces below 40°F (4°C) • Do not apply to surfaces above 90°F (32°C) • Product may discolor if exposed to direct sunlight • Resistance to in‑service chemical exposure must be confirmed for compatibility prior to application • FX‑30 JETSET is extremely sensitive to moisture. Keep containers tightly closed to prevent moisture from coming into contact with the material as very small amounts can begin the reaction process. • JETSET products are packed under a nitrogen blanket to prevent contact with atmospheric moisture. Once the original packaging has been opened, shelf life can be expected to be significantly reduced. Do not open containers until ready to use and close immediately to protect remaining contents. • Do not exceed 10% by volume addition of FX‑Accelerator FX‑30 JETSET Super Low Viscosity Hydrophobic Polyurethane Injection Gel FX‑30 JETSET is a super low viscosity, single‑component, MDI‑hydrophobic, non‑expansive polyurethane gel designed to stop and prevent water leaks. FX‑30 JETSET reacts with water to form a permanently flexible closed‑cell waterproof gel that prevents water infiltration. Packaging / SKU • 1 gallon can (FX30JETSET‑1) • 5 gallon pail (FX30JETSET‑5) Color Light yellow Mixed Viscosity 15 cps at 75°F (24°C) Storage Store dry between 40–95°F (4–35°C) Shelf Life 1 year in unopened packaging CSI Specification 03 64 00 Injection Grouting
  • 33. 33F‑R‑PG13 ©2013 Simpson Strong‑Tie Company Inc. (800) 999-5099 | strongtie.com Sealing Joint PRIMERS Where to Use • To increase adhesion between substrate and sealant • Joint sealant applications subject to immersion • Recommended with FX-570/571/572/573 Features • Ready to use • For use with concrete, masonry, and wood • Can be applied by brush, roller or spray • Up to 8-hour open time at 72°F (22°C) Application Rate • 300 ft.2 /gal. (7.4 m2 /L), depending on surface profile and porosity Limitations • Do not apply to surfaces below 40°F (4°C) or if temperatures are expect to fall below minimum temperature for 4 hours following application • Do not apply to surfaces above 100°F (38°C) • Sealant must be installed within 8 hours of primer application. Re‑apply if exceeded FX‑57X Sealant Primer FX‑57X Sealant Primer is a single‑component, fast drying, moisture‑curing primer designed to increase the bond between the substrate and polysulfide sealants. Packaging / SKU • 1 quart can (FX57XPRIMER‑QT) • 1 gallon can (FX57XPRIMER‑1) Color Clear Storage Store dry between 40–95°F (4–35°C) Shelf Life 1 year in unopened packaging CSI Specification 07 92 00 Joint Sealants
  • 34. 34 F‑R‑PG13 ©2013 Simpson Strong‑Tie Company Inc. (800) 999-5099 | strongtie.com Repair, Protection and Strengthening Systems for Concrete and Masonry JointSealing FLEXIBLE SEALANTS Where to Use • Expansion joints in concrete and masonry • Window and door frames • Pipe penetrations, flashings, roofing applications Features • Paintable • UV resistant • Bond to most common construction materials without a primer • For vertical and horizontal applications • Suitable for above and below‑grade applications • Remains flexible after cure • +/‑ 25% movement capability • Non staining Yield • 36 in.3 (0.0006 m3 ) per sausage • 24 lin. ft. (7.3 m) per sausage using ¼ in. deep x ½ in. wide (0.6 cm x 1.3 cm) joint size Limitations • Do not apply to surfaces below 40°F (4°C) • Do not apply to surfaces above 100°F (38°C) • Minimum 1/4 in. (6 mm) installation depth • Maximum 1/2 in. (12.7 mm) installation depth • Surface to receive sealant must be completely dry • An active vapor drive can cause sealant to gas and bubble • Adhesion and product compatibility testing must be performed prior to over‑coating FX‑516 to verify compatibility • Do not wet tool with solvent or soapy water • Horizontal joints subject to traffic should be 1/2 in. (12.7 mm) thick • Not recommended for immersion service applications • Dynamic joints require the use of backer rod or bond-breaker tape FX‑516 Elastomeric Sealant FX‑516 Elastomeric Sealant is a single‑component, non‑sag, moisture‑cured, elastomeric joint sealant designed for 25% movement in dynamic construction joints. FX‑516 bonds well to most common construction materials to provide a watertight seal. Specification Compliance FX-516 exceeds the performance requirements of ASTM C 920 Type S, NS, Class 25; TT-S-00230C; USDA Approved. Packaging / SKU • 20 oz. sausage pack (FX516GRAY‑20S) Color Available in gray, other colors available by special order. Storage Store dry between 40–95°F (4–35°C) Shelf Life 1 year in unopened packaging CSI Specification 07 92 00 Joint Sealants
  • 35. 35F‑R‑PG13 ©2013 Simpson Strong‑Tie Company Inc. (800) 999-5099 | strongtie.com Repair, Protection and Strengthening Systems for Concrete and Masonry JointSealing Where to Use • Expansion joints in concrete and masonry • Precast panels, parking decks, water treatment facilities • Secondary containment with limited chemical exposure • Immersion in-service environments Features • Bond to most common construction materials without a primer • In-service temperature range of ‑40 to 250°F (‑40 to 121°C) • +/-25% movement capacity • Excellent chemical resistance • Long in‑service lifecycle • UV resistant Yield • 346 in.3 (0.0057 m3 ) per kit • 230 lin. ft. (70 m) per kit using ¼ in. deep x ½ in. wide (0.6 cm x 1.3 cm) joint size Limitations • Do not apply to surfaces below 40°F (4°C) • Do not apply to surfaces above 95°F (35°C) • Surface to receive sealant must be completely dry • An active vapor drive can cause sealant to gas and bubble • Do not wet tool with solvent or soapy water • FX‑57X primer is recommended for all installations subject to immersion • Allow FX‑570/571 to cure for a minimum of 7 days prior to placing into immersion service • Adhesion testing is required for all painted or coated substrates to verify adhesion properties prior to use • Horizontal joints subject to traffic should be a minimum of 1/2 in. (1.3 cm) thick • Minimum joint width is 1/4 in. (0.6 cm) • Dynamic joints require the use of backer rod or bond-breaker tape FX‑570/571 Polysulfide Joint Sealants FX‑570/571 Polysulfide Joint Sealants are two‑component, chemically‑cured, elastomeric joint sealants designed to provide a watertight seal in dynamic construction joints. Available in non‑sag (FX‑570) and self‑leveling (FX‑571) versions, FX‑570/571 bond well to most common construction materials, have excellent UV and chemical resistance and long expected service life. Specification Compliance FX-570/571 exceeds the performance requirements of ASTM C 920, Class 25, Grade NS (FX‑570), Grade P (FX‑571); GSA TT‑S‑0227E. Packaging / SKU • 1.5 gallon kit (FX570KT1.5) • 1.5 gallon kit (FX571KT1.5) Color Mixed: Dark gray Mixing Ratio Pre-proportioned kit. Use entire contents of all components. Storage Store dry between 40–95°F (4–35°C) Shelf Life 1 year in unopened packaging CSI Specification 07 92 00 Joint Sealants FLEXIBLE SEALANTS
  • 36. 36 F‑R‑PG13 ©2013 Simpson Strong‑Tie Company Inc. (800) 999-5099 | strongtie.com Repair, Protection and Strengthening Systems for Concrete and Masonry JointSealing Where to Use • Expansion joints in concrete and masonry • Precast panels, parking decks, water treatment facilities • Secondary containment with limited chemical exposure • Immersion in-service environments Features • Bond to most common construction materials without a primer • In‑service temperature range of ‑40 to 250°F (‑40 to 121°C) • Excellent chemical resistance • Long in‑service lifecycle • UV resistant Yield • 346 in.3 (0.0057 m3 ) per kit • 230 lin. ft. (70 m) per kit using ¼ in. deep x ½ in. wide (0.6 cm x 1.3 cm) joint size Limitations • Do not apply to surfaces below 40°F (4°C) • Do not apply to surfaces above 95°F (35°C) • Surface to receive sealant must be completely dry • An active vapor drive can cause sealant to gas and bubble • Do not wet tool with solvent or soapy water • FX‑57X primer is recommended for all installations subject to immersion • Allow FX‑572/573 to cure for a minimum of 7 days prior to placing into immersion service • Adhesion testing is required for all painted or coated substrates to verify adhesion properties prior to use • Horizontal joints subject to traffic should be a minimum of 1/2 in. (1.3 cm) thick • Minimum joint width is 1/4 in. (0.6 cm) • Dynamic joints require the use of backer rod or bond-breaker tape FX‑572/573 Bioactivity‑Resistant Polysulfide Joint Sealants FX‑572/573 Bioactivity‑Resistant Polysulfide Joint Sealants are two‑component, chemically‑cured, elastomeric joint sealants designed to provide a watertight seal in dynamic construction joints with increased resistance to bioactivity encountered in wastewater treatment plants. Available in self‑leveling (FX‑572) and non‑sag (FX‑573) versions, FX‑572/573 bond well to most common construction materials, and have excellent UV and chemical resistance properties to extend their expected in‑service lifecycle. Specification Compliance FX-572/573 exceeds the performance requirements of ASTM C 920, Type M, Class 25, Grade NS (FX‑573), Grade P (FX‑572), Use NT, T, M; GSA TT-S-0227E Type 1 (FX‑572), Type 2 (FX‑573), Class A. Packaging / SKU • 1.5 gallon kit (FX572KT1.5) • 1.5 gallon kit (FX573KT1.5) Color Mixed: Dark gray Mixing Ratio Pre-proportioned kit. Use entire contents of all components. Storage Store dry between 40–95°F (4–35°C) Shelf Life 1 year in unopened packaging CSI Specification 07 92 00 Joint Sealants FLEXIBLE SEALANTS
  • 37. 37F‑R‑PG13 ©2013 Simpson Strong‑Tie Company Inc. (800) 999-5099 | strongtie.com Repair, Protection and Strengthening Systems for Concrete and Masonry JointSealing SEMI-RIGID SEALANTS Where to Use • Warehouses and distribution centers • Industrial and commercial concrete floors • As a rapid‑curing joint filler for non‑moving horizontal joints in concrete Features • Return to full traffic in 1 hour at 70°F (21°C) • Low odor • Self leveling • Excellent chemical and abrasion resistance • Easy to use dual cartridges with static mixing nozzles available • Bulk systems must be installed with metered plural‑dispensing equipment • In‑service temperature range ‑45 to 200°F (‑42‑93°C) • Protects joint edges from edge spalling under load Yield • 231 in.3 /gal. (0.001 m3 /L) neat • 36 in.3 (0.0006 m3 ) per cartridge • 8 lin. ft. (2.4 m) per cartridge at 1 ½ in. deep x ¼ in. wide (3.8 cm x 0.6 cm) • 51 lin. ft. per gallon (4.1 m/L) at 1 ½ in. deep x ¼ in. wide (3.8 cm x 0.6 cm) Limitations • Do not apply to surfaces below 35°F (2°C) • Do not apply to surfaces above 95°F (35°C) • Not for use in dynamic joints • Requires specialty mixing and placing equipment for bulk applications • Must be dispensed through a static mixing system • Surface to receive sealant must be completely dry • Adhesion and product compatibility testing must be performed prior to over‑coating FX‑562 to verify compatibility • For interior use only • For horizontal use only • Floor must be level FX‑562 Rapid‑Curing Polyurea Joint Filler FX‑562 Rapid‑Curing Polyurea Joint Filler is a 100% solids, two‑component, self‑leveling, fast‑curing, semi‑rigid polyurea joint filler designed to fill control joints in commercial and industrial concrete floors subject to heavy forklift traffic and joint edge spalling. Packaging / SKU • 20 oz. side‑by‑side dual cartridge (FX562CTG) • 2 gallon kit (FX562KT2) • 10 gallon kit (FX562KT10) Color Mixed: Light gray Mixing Ratio 1A:1B Storage Store dry between 40–80°F (4–27°C). Shelf Life 1 year in unopened packaging CSI Specification 07 92 00 Joint Sealants
  • 38. 38 F‑R‑PG13 ©2013 Simpson Strong‑Tie Company Inc. (800) 999-5099 | strongtie.com Coating Performance CEMENTITIOUS COATINGS Where to Use • Horizontal and vertical surfaces • Above-grade, on-grade and below-grade applications • Waterproofing and damp‑proofing concrete and masonry • Interior and exterior applications • To protect concrete and masonry from freeze/thaw cycles • To even out surface color variations on newly repaired concrete Features • Trowel or slurry consistency • Convenient pre‑measured kit • Excellent bond strength • Can be applied by brush, roller, spray, or trowel • Not a vapor barrier when used for damp‑proofing Application Rate Damp-proofing: 20 WFT mils total applied in one coat, 80 ft.2 /gal. (2 m2 /L) depending on surface profile and porosity Waterproofing: 40 WFT mils total applied in two coats, 80 ft.2 /gal. (2 m2 /L) per coat depending on surface profile and porosity Limitations • Do not apply to surfaces below 45°F (7°C) or if temperatures are expected to fall below minimum temperature for 24 hours following application • Do not apply to surfaces above 90°F (32°C) • Protect liquid component from freezing; discard if freezing occurs • Protect coating from rain and freezing temperatures for 24 hours following installation • Adhesion and product compatibility testing must be performed prior to over‑coating existing coatings • Do not apply at application rates less than 40 ft.2 /gal. (1 m2 /L) • Service conditions for horizontal applications should be limited to foot traffic • Allow a minimum of 24 hours at 75°F (24°C) air-curing before exposing installed FX-207 to submerged conditions. Lower temperatures will extend required air-curing time • Avoid contact with aluminum surfaces FX‑207 Slurry Seal FX‑207 Slurry Seal is a two‑component, polymer‑modified cementitious coating designed for waterproofing and damp‑proofing concrete and masonry substrates. Packaging / SKU 3.3 gallon kit (FX207KT1-1) contains: • 1 gallon jug of Component “A” (FX207-1A) • 40 lb. bag of Component “B” (FX207B) Color Gray Mixing Ratio Pre-proportioned kit. Use entire contents of all components. Storage Store dry between 40–95°F (4–35°C). Protect from freezing. Shelf Life 1 year in unopened packaging CSI Specification 07 16 00 Cementitous Waterproofing
  • 39. 39F‑R‑PG13 ©2013 Simpson Strong‑Tie Company Inc. (800) 999-5099 | strongtie.com Repair, Protection and Strengthening Systems for Concrete and Masonry CEMENTITIOUS COATINGS PerformanceCoating Where to Use • DOT Applications: Bridges, pilings, parapets, retaining walls • Commercial: pre‑cast and tilt-up wall panels, CMU block, foundations, stucco, parking structures • As a protective and decorative coating for concrete and masonry • Waterproofing and damp‑proofing concrete and masonry • Freeze/thaw and de‑icing salt protection • For vertical and overhead applications • Interior and exterior applications • Above and below-grade applications Features • Fine texture • Good hiding properties • Not a vapor barrier • Durable and abrasion resistant • Excellent weathering properties • Low odor • Non flammable • Easy to apply • Pre‑measured kit Application Rate • 16-32 WFT mils total applied in two coats • 100-200 ft.2 /gal. (2.4-4.9 m2 /L) per coat depending on surface profile and porosity Limitations • Do not apply to surfaces below 45°F (7°C) or if temperatures are expected to fall below minimum temperature for 24 hours following application • Do not apply to surfaces above 90°F (32°C) • Protect FX‑214 from freezing; discard if freezing occurs • Protect coating from rain and freezing temperatures for 24 hours following installation • Adhesion and product compatibility testing must be performed prior to over‑coating existing coatings • Mudcracking may occur if applied in excess of 100 ft.2 /gal. (2.4 m2 /L) per coat • Avoid contact with aluminum surfaces FX‑214 Polymer Cementitious Coating FX‑214 Polymer Cementitious Coating is a two‑component, polymer‑modified, cementitious, protective and decorative coating designed for waterproofing and damp‑proofing concrete and masonry structures. Packaging / SKU 5 gallon kit (FX214xxxKT3-1) contains: • 3 gallons of liquid Component “A” in a 5 gallon pail (FX214-3A) • (1) 45 lb. bag of Component “B” (FX214xxx-B) Color Available in white, tan or gray. Other colors available by special order. Mixing Ratio Pre-proportioned kit. Use entire contents of all components. Storage Store dry between 40–95°F (4–35°C). Protect liquid component from freezing. Shelf Life 1 year in unopened packaging CSI Specification 09 97 23 Coatings for Concrete and Masonry
  • 40. 40 F‑R‑PG13 ©2013 Simpson Strong‑Tie Company Inc. (800) 999-5099 | strongtie.com Where to Use • Commercial and industrial applications requiring moderate chemical resistance • Primary/secondary containment • Water/wastewater: clarifiers, digesters, sludge thickener tanks, lift stations, manholes • Food processing plants: walls, trenches, sumps • Marine applications: protection from salt spray and water intrusion in immersion service applications • Petrochemical applications • Above and below‑grade applications Features • Excellent chemical and abrasion resistance in wastewater and other industiral applicatons • Exceptional resistance to hydrogen sulfide (H2S) gas • Resists abrasion and staining • Suitable for immersion service • Can be applied to damp (SSD) concrete • Self‑priming for most applications • Can be fabric‑reinforced for added durability • Very low odor Application Rate • 16–20 DFT mils total applied in two coats • 160–200 ft.2 /gal. (3.9-4.9 m2 /L) per coat depending on surface profile and porosity Limitations • Do not apply to surfaces below 45°F (7°C) • Do not apply to surfaces above 90°F (32°C) • Material is a vapor barrier after cure. Concrete surface to receive coating must not exhibit an active moisture vapor drive. • Adhesion and product compatibility testing must be performed prior to over‑coating existing coatings • Product may discolor if exposed to direct sunlight • Resistance to in‑service chemical exposure must be confirmed for compatibility prior to applicaton • Installations subject to immersion service must be verified to be holiday free FX‑70‑9® Epoxy Coating FX‑70‑9 Epoxy Coating is a 100% solids, two‑component, moisture‑tolerant, high‑build protective coating designed to protect steel, concrete and wood. Specification Compliance FX-70-9 complies with UDSA Food and Safety Inspection Services acceptance for meat and poultry plants for incidental food contact. Packaging / SKU • 3 gallon kit (FX70‑9xxxKT3) • 15 gallon kit (FX70‑9xxxKT15) Color Available in gray, dark gray, tan and white; other colors available by special order. Mixing Ratio 2A:1B Mixed Viscosity 13,300 +/- 1000 cps at 75°F (24°C) Storage Store dry between 40–95°F (4–35°C) Shelf Life 2 years in unopened packaging CSI Specification 09 96 56 Epoxy Coating EPOXY COATINGS Repair, Protection and Strengthening Systems for Concrete and Masonry PerformanceCoating
  • 41. 41F‑R‑PG13 ©2013 Simpson Strong‑Tie Company Inc. (800) 999-5099 | strongtie.com Repair, Protection and Strengthening Systems for Concrete and Masonry EPOXY COATINGS PerformanceCoating Where to Use • Commercial and industrial applications requiring moderate chemical resistance and high abrasion resistance • Primary/secondary containment • Pond/tank lining system • Water/wastewater: protective lining for steel and concrete tanks, digesters • Marine applications: to protect concrete, steel, and wood piles and other structural marine elements Features • Excellent chemical resistance in wastewater and other tank lining applications • High‑build system • Excellent abrasion resistance • Suitable for in immersion service • Can be applied to damp (SSD) concrete • Self‑priming for most applications • Low odor Application Rate FX 70-9® Epoxy Coating: • 80 WFT mils total applied in two fabric saturant coats and one topcoat FX 70® -10 Fabric: • Applied in  2 layers with all splices overlapped 2 in. (5.1 cm) minimum Fabric Saturant Coats: • FX-70-9® Epoxy Coating at 50 ft.2 /gal. (1.2 m2 /L) with one layer of FX 70® -10 Fabric embedded and back-rolled wet Topcoat: • FX-70-9® Epoxy Coating applied at 80 ft.2 /gal. (2 m2 /L) Limitations • Do not apply to surfaces below 45°F (7°C) • Do not apply to surfaces above 90°F (32°C) • Material is a vapor barrier after cure. Concrete surface to receive coating must not exhibit an active moisture vapor drive. • Adhesion and product compatibility testing must be performed prior to over‑coating existing coatings • Product may discolor if exposed to direct sunlight • Resistance to in‑service chemical exposure must be confirmed for compatibility prior to applicaton • Installations subject to immersion service must be verified to be holiday-free FX‑70® ‑10 Field‑Formed Protective System FX‑70‑10 Field‑Formed Protective System is a high‑build, chemical‑resistant, fabric‑reinforced, multi‑layer protective epoxy coating system designed for high abrasion environments. The FX‑70‑10 Field‑Formed Protective System consists of two layers of fiberglass fabric encapsulated in three coats of FX‑70‑9 Epoxy Coating. Specification Compliance FX-70-10 complies with USDA Food and Safety Inspection Services acceptance for meat and poultry plants for incidental food contact. Packaging / SKU FX-70® -10 Fabric: • 4 in. x 150 ft. (FXGRF4X50) • 6 in. x 150 ft. (FXGRF6X50) • 12 in. x 150 ft. (FXGRF12X50) • 38 in. x 375 ft. (FXGRF38X125) FX‑70® -9 Epoxy Coating: • 3 gallon kit (FX70‑9xxxKT3) • 15 gallon kit (FX70‑9xxxKT15) Color Available in gray, dark gray, tan and white; other colors available by special order. Mixing Ratio 2A:1B Storage Store dry between 40–95°F (4–35°C) Shelf Life • FX‑70® ‑10 Fabric: 4 years in unopened packaging • FX‑70‑9® Epoxy Coating: 2 years in unopened packaging CSI Specification 09 96 56 Epoxy Coatings
  • 42. 42 F‑R‑PG13 ©2013 Simpson Strong‑Tie Company Inc. (800) 999-5099 | strongtie.com Repair, Protection and Strengthening Systems for Concrete and Masonry PerformanceCoating EPOXY COATINGS Where to Use • Above and below-grade applications • Commercial and industrial applications requiring moderate chemical resistance • Primary and secondary containment • Wastewater applications • Marine applications • Petrochemical applications Features • Moderate chemical resistance in wastewater and other industrial applications • Flexible and impact resistant • Suitable for immersion service • Chemical and abrasion resistant • Self‑priming for most applications Application Rate • 16–20 DFT mils total applied in two coats • 135–170 ft.2 /gal. (3.3–4.2 m2 /L) per coat depending on surface profile and porosity Limitations • Do not apply to surfaces below 50°F (10°C) • Do not apply to surfaces above 90°F (32°C) • Material is a vapor barrier after cure. Concrete surface to receive coating must not exhibit an active moisture vapor drive. • Adhesion and product compatibility testing must be performed prior to over‑coating existing coatings • Resistance to in‑service chemical exposure must be confirmed for compatibility prior to application • Installations subject to immersion service must be verified to be holiday-free FX‑420 Coal-Tar Epoxy FX‑420 Coal-Tar Epoxy is a high‑solids, two‑component, coal‑tar epoxy coating designed to protect steel, concrete, and wood from chemical exposure. Specification Compliance FX‑420 exceeds the performance requirements of Corp. of Engineers C‑200, Federal Specification DOD‑P‑23236 (SHIPS), and SSPC 16‑91. Packaging / SKU • 5 gallon kit (FX420KT5) • 25 gallon kit (FX420KT25) Color Mixed: Black Mixing Ratio 1A:4B Mixed Viscosity 6,000 cps at 75°F (24°C) Storage Store dry between 40–95°F (4–35°C) Shelf Life 2 years in unopened packaging CSI Specification 09 96 56 Epoxy Coatings
  • 43. 43F‑R‑PG13 ©2013 Simpson Strong‑Tie Company Inc. (800) 999-5099 | strongtie.com Repair, Protection and Strengthening Systems for Concrete and Masonry EPOXY COATINGS Where to Use • Commercial and industrial applications requiring moderate chemical resistance • Primary and secondary containment • Wastewater applications • Marine applications • Manhole linings • Petrochemical applications Features • Moderate chemical resistance in wastewater and other industrial applications • Suitable for intermittent high- temperature exposure • Flexible and impact resistant • Suitable for immersion service • Chemical and abrasion resistant • Can be spray-applied up to 40 WFT mils in one coat • Self‑priming for most applications Application Rate • 20–80 DFT mils total applied in two coats • 40–160 ft.2 /gal. (1–3.9 m2 /L) per coat depending on surface profile and porosity Limitations • Do not apply to surfaces below 50°F (10°C) • Do not apply to surfaces above 90°F (32°C) • Material is a vapor barrier after cure. Concrete surface to receive coating must not exhibit an active moisture vapor drive. • Adhesion and product compatibility testing must be performed prior to over‑coating existing coatings • Resistance to in‑service chemical exposure must be confirmed for compatibility prior to application • Installations subject to immersion service must be verified to be holiday free FX‑421 High‑Build Coal-Tar Epoxy FX‑421 High‑Build Coal-Tar Epoxy is a 100% solids, two‑component, moisture‑tolerant coal‑tar epoxy coating designed to protect steel, concrete, and wood from chemical exposure. Specification Compliance FX‑421 High Build Coal-Tar Epoxy exceeds the performance requirements of Corp. of Engineers C‑200, Federal Specification DOD‑P‑23236 (SHIPS), and SSPC 16‑91. Packaging / SKU • 5 gallon kit (FX421KT5) • 25 gallon kit (FX421KT25) Color Mixed: Black Mixing Ratio 2A:3B Mixed Viscosity 25,000 cps at 75°F (24°C) Storage Store dry between 40–95°F (4–35°C) Shelf Life 2 years in unopened packaging CSI Specification 09 96 56 Epoxy Coatings PerformanceCoating
  • 44. 44 F‑R‑PG13 ©2013 Simpson Strong‑Tie Company Inc. (800) 999-5099 | strongtie.com Repair, Protection and Strengthening Systems for Concrete and Masonry Where to Use • Epoxy binder for broadcast overlay coating systems • Epoxy binder for floor toppings • Epoxy mortar for rout‑and‑seal crack filler Features • Applications as low as 40°F (4°C) • Self‑priming for broadcast coating applications • Low‑modulus binder for rout‑and‑seal applications • Can be applied by spray, squeegee, roller or trowel • Moisture tolerant, can be applied to damp (SSD) concrete Application Rate/Yield Broadcast System: • 42–46 DFT mils applied in three coats depending on surface profile and porosity Prime Coat: • 150 ft.2 /gal. (3.7 m2 /L) Broadcast Coat: • 100 ft.2 /gal. (2.5 m2 /L) with FX-701 Oven-Dried Graded Silica Filler at a rate of 3/4 lbs. per ft.2 (3.6 kg per m2 ) Seal Coat: • 80–100 ft.2 /gal. (2.0-2.5 m2 /L) Grout/Mortar: • 231 in.3 /gal. (0.001 m3 /L) neat • 300–600 in.3 /gal. (0.0013–0.0026 m3 /L) when mixed 1–3 parts by volume with FX-701 Oven-Dried Graded Silica Filler Limitations • Do not apply to surfaces below 40°F (4°C) • Do not apply to surfaces above 90°F (32°C) • Material is a vapor barrier after cure. Concrete surface to receive coating must not exhibit an active moisture vapor drive. • Not recommended for exterior slab on-grade applications • Adhesion and product compatibility testing must be performed prior to over‑coating existing coatings • Compatible with FX‑701 Oven‑Dried Graded Silica Filler. Alternative aggregates must be oven‑dried • Product may discolor if exposed to direct sunlight FX‑761M Low‑Modulus Epoxy FX‑761M Low‑Modulus Epoxy is a low‑viscosity, two‑component, 100% solids, moisture‑tolerant epoxy designed for broadcast flooring systems, grouting and rout‑and‑seal applications. Specification Compliance FX-761M exceeds the performance requirements of ASTM C 881, Type III, Grade 1, Class B. Packaging / SKU • 3 gallon kit (FX761MKT3) • 15 gallon kit (FX761MKT15) • 150 gallon kit (FX761MKT150) Color Mixed Epoxy: Dark amber Finish Low gloss Mixing Ratio 2A:1B Mixed Viscosity 900 cps at 75°F (24°C) Storage Store dry between 40–95°F (4–35°C) Shelf Life 2 years in unopened packaging CSI Specification 03 01 00 Maintenance of Concrete 07 18 00 Traffic Coatings PerformanceCoating EPOXY COATINGS
  • 45. 45F‑R‑PG13 ©2013 Simpson Strong‑Tie Company Inc. (800) 999-5099 | strongtie.com Repair, Protection and Strengthening Systems for Concrete and Masonry PerformanceCoating EPOXY COATINGS Where to Use • As a binder for anchor and base plate grouting • Repair mortar for dry or damp surfaces and bridge decks • Epoxy mortar for floor toppings • Epoxy binder for broadcast overlay coating systems Features • High strength • Fast cure Application Rate / Yield Broadcast System: • 42–46 DFT mils applied in three coats depending on surface profile and porosity Prime Coat: • 150 ft.2 /gal. (3.7 m2 /L) Broadcast Coat: • 100 ft.2 /gal. (2.5 m2 /L) with FX-701 Oven-Dried Graded Silica Filler at a rate of 3/4 lbs. per ft.2 (3.6 kg per m2 ) Seal Coat: • 80–100 ft.2 /gal. (2.0-2.5 m2 /L) Grout/Mortar: • 231 in.3 /gal. (0.001 m3 /L) neat • 300–600 in.3 /gal. (0.0013–0.0026 m3 /L) when mixed 1–3 parts by volume with FX-701 Oven-Dried Graded Silica Filler Limitations • Do not apply to surfaces below 40°F (4°C) • Do not apply to surfaces above 90°F (32°C) • Material is a vapor barrier after cure. When used as a grout or coating, concrete surface must not exhibit an active moisture vapor drive. • Not recommended for exterior slab on-grade applications • Product may discolor if exposed to direct sunlight • Not recommended for large exterior repairs or applications subject to large thermal change when used as a repair motar • When used as a base plate grout or repair mortar, minimum application thickness is 1/2 in. (1.3 cm). Maximum installation depth is 3 in. (7.6 cm). • Epoxy grouts can crack due to thermal stress. Do not form more than 4 in. (10.2 cm) beyond the plate to limit thermal cracking • When used as an epoxy binder, use FX-701 Oven-Dried, Graded Silica Filler to prevent encapsulating moisture Please note: This product has not been evaluated for resisting long-term sustained loads in anchor applications. Refer to the current Anchoring and Fastening Systems for Concrete and Masonry catalog or www.strongtie.com for code-listed structural anchoring adhesives. . FX‑775 Medium‑Viscosity Epoxy FX‑775 Medium‑Viscosity Epoxy is a two‑component, 100% solids, moisture‑tolerant, medium‑viscosity structural epoxy designed for use as a grout binder and floor coating. Specification Compliance Exceeds ASTM C 881, Types I and IV, Grade 2, Class B. Packaging / SKU • 3 gallon kit (FX775KT3) • 15 gallon kit (FX775KT15) • 150 gallon kit (FX775KT150) Color Light Straw Mixing Ratio 2A:1B Mixed Viscosity 2,500 cps at 72°F (22°C) Storage Store dry between 40–95°F (4–35°C) Shelf Life 2 years in unopened packaging CSI Specification 03 01 00 Maintenance of Concrete 07 18 00 Traffic Coatings
  • 46. 46 F‑R‑PG13 ©2013 Simpson Strong‑Tie Company Inc. (800) 999-5099 | strongtie.com Repair, Protection and Strengthening Systems for Concrete and Masonry PerformanceCoating EPOXY COATINGS Where to Use • Commercial and industrial applications requiring extreme chemical and high-temperature resistance • Primary and secondary containment • Chemical Processing/Petrochemical: tank linings, floors, sumps, trenches • Power: FGD scrubber boxes, condensers, heat exchangers, tank linings, sumps, trenches, floors • Water/wastewater: clarifiers, digesters, sludge thickener tanks, lift stations, manholes • Food-processing plants: walls, ceilings, floors, trenches, sumps Features • Extreme chemical resistance in wastewater and other industrial applications • Excellent resistance to aggressive acids, bases and petroleum products at a wide temperature range (Sulfuric Acid, Sodium Hydroxide, Skydrol) • Can be force-cured to increase chemical resistance • Resists abrasion and staining • Suitable for immersion service • Self‑priming for most applications • Can be fabric reinforced for added durability • Can be applied by brush, roller, or spray applied with plural-component equipment • Very-low odor Application Rate Primary Containment/Immersion Service: • 45–50 DFT mils total applied in two coats • 65–70 ft.2 /gal. (1.6–1.7 m2 /L) per coat depending on surface profile and porosity Secondary Containment: • 30–35 DFT mils total applied in two coats • 90–105 ft.2 /gal. (2.2–2.6 m2 /L) per coat depending on surface profile and porosity Limitations • Do not apply to surfaces below 50°F (10°C) • Do not apply to surfaces above 90°F (32°C) • Material is a vapor barrier after cure. Concrete surface to receive coating must not exhibit an active moisture vapor drive. • Adhesion and product compatibility testing must be performed prior to over‑coating existing coatings • Resistance to in-service chemical exposure must be confirmed for compatibility prior to application • Product may discolor if exposed to direct sunlight • Installations subject to immersion service must be verified to be holiday-free FX‑3110SW Chemical-Resistant Novolac Epoxy FX‑3110SW Chemical‑Resistant Novolac Epoxy is a 100% solids, two‑component, high‑build coating designed to protect steel, concrete, and wood from aggressive chemical exposure in secondary containment and immersion‑service applications. Specification Compliance Complies with USDA Food and Safety Inspection Services acceptance for meat and poultry plants for incidental food contact. Packaging / SKU • 3 gallon kit (FX3110SWxxxKT3) • 15 gallon kit (FX3110SWxxxKT15) Color Gray or tile red, other colors available by special order. Mixing Ratio 2A:1B Mixed Viscosity 15,000 cps at 75°F (24°C) Storage Store dry between 40–95°F (4–35°C) Shelf Life 2 years in unopened packaging CSI Specification 09 96 00 High Performance Coatings
  • 47. 47F‑R‑PG13 ©2013 Simpson Strong‑Tie Company Inc. (800) 999-5099 | strongtie.com Repair, Protection and Strengthening Systems for Concrete and Masonry PerformanceCoating WATER REPELLENTS Where to Use • Damp proofing of new and remedial concrete, masonry, brick, block and stone • Parking decks, bridges and precast panels • Horizontal and vertical surfaces • Exterior applications Features • Single component; Ready to use • Easily applied with hand‑pumped spray equipment • Can be applied by brush, roller, squeegee, or spray • Not a vapor barrier • Helps prevent mold growth and efflorescence Application Rate • Concrete: 100–200 ft.2 /gal. (2.4–4.8 m2 /L) • Brick: 100–200 ft.2 /gal. (2.4–4.8 m2 /L) • CMU: 80–150 ft.2 /gal. (1.9–3.6 m2 /L) Actual application rate may vary due to surface profile and/or porosity. Limitations • Do not apply to surfaces below 40°F (4°C) • Do not apply to surfaces above 100°F (38°C) • Can cause slight variations (darkening) in surface color or appearance on some substrates • Not designed to bridge moving cracks • Do not dilute • Protect from rain for 12 hours following installation • Mask and protect all adjacent surfaces to protect from overspray FX‑425 Penetrating Water Repellant FX‑425 Penetrating Water Repellent is a single‑component, 40% solids, solvent-based sealer which combines a proprietary blend of silane, siloxane, and solvent to provide maximum penetration into concrete, masonry, and stone. FX‑425 is clear, forming an invisible hydrophobic barrier that repels water and protects the substrate from freeze/thaw cycles and chloride intrusion. Packaging / SKU • 1 gallon can (FX425‑1) • 5 gallon pail (FX425‑5) • 50 gallon drum (FX425‑50) Color Clear Storage Store dry between 40–95°F (4–35°C) Shelf Life 1 year in unopened packaging CSI Specification 07 19 23 Water Repellents
  • 48. 48 F‑R‑PG13 ©2013 Simpson Strong‑Tie Company Inc. (800) 999-5099 | strongtie.com Repair, Protection and Strengthening Systems for Concrete and Masonry PerformanceCoating WATER REPELLENTS Where to Use • Damp proofing of new and remedial concrete and masonry • Parking decks, bridges, precast panels, brick, block and stone • Horizontal and vertical surfaces • Interior and exterior applications Features • Does not require masking of windows or painted surfaces • Can be applied by brush, roller, squeegee, or spray • Not a vapor barrier • Easily applied with hand‑pumped spray equipment Application Rate • Concrete: 200–400 ft.2 /gal. (4.8–9.8 m2 /L) • Brick: 200–400 ft.2 /gal. (4.8–9.8 m2 /L) • CMU: 160–300 ft.2 /gal. (3.9–7.3 m2 /L) Actual application rate may vary due to surface profile and/or porosity. Limitations • Do not apply to surfaces below 40°F (4°C) • Do not apply to surfaces above 100°F (38°C) • Can cause slight variations (darkening) in surface color or appearance on some substrates • Not designed to bridge moving cracks • Do not dilute • Protect from rain for 12 hours following installation • Protect all adjacent surfaces from overspray FX‑427 Pure Silane Sealer FX‑427 Pure Silane Sealer is a single‑component, high-solids silane sealer designed to penetrate deeply into concrete and masonry. FX‑427 is clear, forming an invisible hydrophobic barrier that repels water and protects the substrate from freeze/thaw cycles and chloride intrusion. Packaging / SKU • 1 gallon can (FX427‑1) • 5 gallon pail (FX427‑5) • 50 gallon drum (FX427‑50) Color Clear Storage Store dry between 40–95°F (4–35°C) Shelf Life 1 year in unopened packaging CSI Specification 07 19 16 Silane Water Repellents
  • 49. 49F‑R‑PG13 ©2013 Simpson Strong‑Tie Company Inc. (800) 999-5099 | strongtie.com Repair, Protection and Strengthening Systems for Concrete and Masonry PerformanceCoating DECORATIVE/PROTECTIVE Where to Use • Commercial building façades • Concrete and masonry substrates • New and remedial applications • Exterior applications • Vertical and overhead surfaces • Tilt‑wall and precast panels • Block and brick masonry • Retaining walls • Various DOT applications Features • Combination water repellent and architectural coating • Superior weathering resistance • Extended service life • High‑hiding matte finish • Penetrating hydrophobic barrier • Improves freeze/thaw resistance • High vapor transmission rate • Self cleaning/resists chalking • Mold and mildew resistant • Excellent adhesion properties • Water based • Low VOC • Can be applied by brush, roller, or spray Application Rate FX‑460 Topcoat: • 5–8 DFT mils total applied in two coats • 190–300 ft.2 /gal. (4.6–7.4 m2 /L) per coat depending on surface profile and porosity FX‑460 Primer: • 150–300 ft.2 /gal. (3.6–7.4 m2 /L) Limitations • Do not apply to surfaces below 45°F (7°C) or if temperatures are expected to fall below minimum temperature for 4 hours following application • Do not apply to surfaces above 90°F (32°C) • Protect from freezing; discard if freezing occurs • For vertical and overhead applications only • Not designed to bridge moving cracks • Adhesion and product compatibility testing must be performed prior to over‑coating existing coatings • Topcoat must be installed within 14 days of FX‑460 Primer application • Protect coating from rain for 4 hours following installation FX‑460 High‑Performance Breathable Coating System FX‑460 High‑Performance Breathable Coating System is a long‑lasting, self-cleaning, decorative and protective coating combined with a penetrating, water repellent-primer (FX‑460 Primer) for unparalleled protection of concrete and masonry structures. The FX‑460 High‑Performance Breathable Coating System utilizes a technologically advanced water‑based silicone resin backbone that chemically bonds to the substrate to form a tough quartz‑like mineral finish with outstanding weathering characteristics. Packaging / SKU FX‑460 • 1 gallon can (FX460xxx-1) • 5 gallon pail (FX460xxx-5) • 50 gallon drum (FX460xxx-50) FX‑460 Primer • 1/2 gallon can (FX460P-2QT) • 1 gallon can (FX460P-1) • 5 gallon pail (FX460P-5) • 50 gallon drum (FX460P-50) Color Gray, tan and white; other colors available by special order. Storage Store dry between 40–95°F (4–35°C). Protect from freezing. Shelf Life 2 years in unopened packaging CSI Specification 09 97 23 Concrete Masonry Coatings
  • 50. 50 F‑R‑PG13 ©2013 Simpson Strong‑Tie Company Inc. (800) 999-5099 | strongtie.com Repair, Protection and Strengthening Systems for Concrete and Masonry PerformanceCoating DECORATIVE/PROTECTIVE Where to Use • Commercial building façades • Concrete and masonry substrates • New and remedial applications • Exterior applications • Vertical and overhead surfaces • Tilt‑wall and precast panels • Block and brick masonry • Retaining walls • Various DOT applications Features • Bridges hairline cracks • Remains flexible at low temperatures • Excellent color retention • Low dirt pick‑up • Excellent hiding properties • Breathable • Water based • Low VOC • Fast drying • Can be applied by brush, roller, or spray Coverage Rate • 16 DFT mils total applied in two coats • 100 ft.2 /gal. (2.4 m2 /L) per coat depending on surface profile and porosity Limitations • Do not apply to surfaces below 50°F (10°C) or if temperatures are expected to fall below minimum temperature for 6 hours following application • Do not apply to surfaces above 90°F (32°C) • Protect from freezing; discard if freezing occurs • For vertical, overhead and non-traffic bearing horizontal applications • Static cracks larger than 1/32 in. (0.8 mm) must be filled and detailed prior to coating application • Dynamic cracks must be filled with an appropriate joint sealant according to manufacturer's installation instructions • Adhesion and product compatibility testing must be performed prior to over‑coating existing coatings and sealants • Protect coating from rain for 6 hours following installation FX‑501 Elastomeric Coating FX‑501 Elastomeric Coating is a single‑component, flexible, water‑based acrylic elastomer designed as a protective architectural coating with exceptional elongation properties for concrete, masonry and stucco. Packaging / SKU • 1 gallon can (FX501xxx‑1) • 5 gallon pail (FX501xxx‑5) • 50 gallon drum (FX501xxx‑50) Color Gray and white; other colors available by special order. Storage Store dry between 40–95°F (4–35°C). Protect from freezing. Shelf Life 2 years in unopened packaging CSI Specification 09 97 23 Coatings for Concrete and Masonry
  • 51. 51F‑R‑PG13 ©2013 Simpson Strong‑Tie Company Inc. (800) 999-5099 | strongtie.com Repair, Protection and Strengthening Systems for Concrete and Masonry PerformanceCoating DECORATIVE/PROTECTIVE Where to Use • Commercial building façades • Concrete and masonry substrates • New and remedial applications • Exterior applications • Vertical and overhead surfaces • Tilt‑wall and precast panels • Block and brick masonry • Retaining walls • Various DOT applications Features • Excellent color retention • 100% acrylic resin • Good hiding properties • Breathable • Water based • Low VOC • Fast drying • Can be applied by brush, roller or spray Application Rate • 2.5–5 DFT mils total applied in two coats • 275–550 ft.2 /gal. (6.7–13.5 m2 /L) per coat depending on surface profile and porosity Limitations • Do not apply to surfaces below 50°F (10°C) or if temperatures are expected to fall below minimum temperature for 6 hours following application • Do not apply to surfaces above 90°F (32°C) • Protect from freezing; discard if freezing occurs • For vertical and overhead applications only • Not designed to bridge moving cracks • Adhesion and product compatibility testing must be performed prior to over‑coating existing coatings • Protect coating from rain for 6 hours following installation FX‑505 Water‑Based Acrylic Coating FX‑505 Water‑Based Acrylic Coating is a single‑component, fast‑drying, protective architectural coating for concrete, masonry and stucco. Packaging / SKU • 1 gallon can (FX505xxx‑1) • 5 gallon pail (FX505xxx‑5) • 50 gallon drum (FX505xxx‑50) Color Gray and white; other colors available by special order. Storage Store dry between 40–95°F (4–35°C). Protect from freezing. Shelf Life 1 year in unopened packaging CSI Specification 09 97 23 Concrete Masonry Coatings
  • 52. 52 F‑R‑PG13 ©2013 Simpson Strong‑Tie Company Inc. (800) 999-5099 | strongtie.com Products Specialty RAIL Where to Use • Railroad crossings • Embedded rail • Flangeway filler • Applications requiring impact resistance • Transit and port facility rail systems • Gantry rail Features • Field‑mixed and easily placed • Excellent electrical resistance • Impact and freeze/thaw resistant • Impact resistant • Excellent resistance to petroleum products, salts and mild acids • Provides quick turnaround and return to service Application Rate/Yield Primer: • 10–16 WFT mils total applied in one coat • 100–150 ft.2 /gal. (2.5–3.7 m2 /L) per coat depending on surface profile and porosity Mortar: • 1.4 ft.3 (0.04 m3 ) per unit Limitations • Do not apply to surfaces below 40°F (4°C) • Do not apply to surfaces above 90°F (32°C) • Minimum installation thickness 1 in. (2.5 cm) • Maximum 4 in. (10.2 cm) lifts • Material is a vapor barrier after cure. Concrete surface to receive coating must not exhibit an active moisture vapor drive. FX‑120 Elastomeric Mortar System FX‑120 Elastomeric Mortar System is a three‑component elastomeric mortar that combines a specially formulated epoxy and recycled rubber granule aggregate to control stray electrical current, isolate vibration, and dampen noise for embedded rail applications. FX‑120 is chemical‑resistant, unaffected by freeze/thaw cycles and flexes under impact/loading. Used with FX‑120P Primer (sold separately). Packaging / SKU Kit (FX120KT5-2) includes: • 2.5 gallon pail of Component “A” (FX120-2.5A) • 2.5 gallon pail of Component “B” (FX120-2.5B) • (2) 25 lb. bags of Component “C” (FX120-C) FX‑120 Primer • 2 gallon kit (FX120PRIMEKT2) Color Black Mixing Ratio 1A:1B Mortar: 50 lb. Component “C” per 5 gallons mixed epoxy Storage Store dry between 40–95°F (4–35°C) Shelf Life 2 years in unopened packaging CSI Specification 03 01 00 Maintenance of Concrete
  • 53. 53F‑R‑PG13 ©2013 Simpson Strong‑Tie Company Inc. (800) 999-5099 | strongtie.com Repair, Protection and Strengthening Systems for Concrete and Masonry Where to Use • Embedded rail anchorage • Railroad crossings • Flangeway filler • Transit and port facility rail systems • Gantry rail Features • Excellent electrical resistance properties • Impact and vibration resistant • Freeze/thaw resistant • Chemical resistant • Moisture tolerant • Fast curing • Shore A Hardness: 60 Yield • 0.5 ft.3 (0.014 m3 ) per kit Limitations • Do not install on surfaces below 40°F (4°C). • Do not apply to surfaces above 90°F (32°C) • Do not thin or use solvents Please note: This product has not been evaluated for resisting long-term sustained loads in anchor applications. Refer to the current Anchoring and Fastening Systems for Concrete and Masonry catalog or www.strongtie.com for code-listed structural anchoring adhesives. FX‑583 Polyurethane Isolation Grout FX‑583 Polyurethane Isolation Grout is a three‑component anchoring grout designed specifically to isolate stray electrical current and dampen sound and vibration in transit rail applications. FX‑583 is formulated to securely anchor rail in interior or exterior environments, creating a flexible seal. Packaging / SKU Pre-proportioned kit (FX583KT2.1-1) is a 5 gallon pail containing: • 1.85 gallon can of Component “A” (FX583-1.85A) • 1 quart can of Component “B” (FX583-.25B) • 25 lb. (11.3 kg) of Component “C” (FX583-C) Color Gray; other colors available by special order. Mixing Ratio Pre-proportioned kit. Use entire contents of all components Storage Store dry between 40–95°F (4–35°C) Shelf Life 1 year in unopened packaging CSI Specification 03 60 00 Grouting SpecialtyProducts RAIL
  • 54. 54 F‑R‑PG13 ©2013 Simpson Strong‑Tie Company Inc. (800) 999-5099 | strongtie.com Repair, Protection and Strengthening Systems for Concrete and Masonry Where to Use • Embedded rail anchorage • Railroad crossings • Flangeway filler • Bridge header repair • Transit and port facility rail systems • Gantry rail Features • Excellent electrical resistance properties • Impact and vibration resistant • Freeze/thaw resistant • Chemical resistant • Moisture tolerant • Fast curing • Shore A Hardness: 85 Yield • 0.53 ft.3 (0.015 m3 ) per kit Limitations • Do not install on surfaces below 40°F (4°C). • Do not apply to surfaces above 90°F (32°C) • Do not thin or use solvents Please note: This product has not been evaluated for resisting long-term sustained loads in anchor applications. Refer to the current Anchoring and Fastening Systems for Concrete and Masonry catalog or www.strongtie.com for code-listed structural anchoring adhesives FX‑587 High‑Durometer Polyurethane Isolation Grout FX‑587 High‑Durometer Polyurethane Isolation Grout is a three‑component, anchoring grout designed specifically to isolate stray electrical current and dampen sound and vibration in transit rail applications. FX‑587 is formulated to securely anchor rail in interior or exterior environments, creating a flexible seal. Packaging / SKU Pre-proportioned kit (FX587KT2.05-1) consists of: • 1.8 gallon pail of Component “A” (FX587-1.8A) • 1 quart can of Component “B” (FX587-.25B) • (1) 40 lb. bag of Component “C” (FX587-C) Color Black Mixing Ratio Pre-proportioned kit. Use entire contents of all components Storage Store dry between 40–95°F (4–35°C) Shelf Life 1 year in unopened packaging CSI Specification 03 60 00 Grouting SpecialtyProducts RAIL
  • 55. 55F‑R‑PG13 ©2013 Simpson Strong‑Tie Company Inc. (800) 999-5099 | strongtie.com Repair, Protection and Strengthening Systems for Concrete and Masonry SpecialtyProducts Where to Use • Railway anchor bolt grouting Features • Provides fast turnaround • Low temperature applications down to 20°F (‑7°C) • Excellent chemical resistance • Pourable • High strength Yield • 0.175 ft.3 (0.005 m3 ) per 25 lb. (11.3 kg) kit • 0.35 ft.3 (0.01 m3 ) per 50 lb. (22.7 kg) kit Limitations • Do not apply to surfaces below 20°F (‑7°C) • Do not apply to surfaces above 60°F (16°C) Please note: This product has not been evaluated for resisting long-term sustained loads in anchor applications. Refer to the current Anchoring and Fastening Systems for Concrete and Masonry catalog or www.strongtie.com for code-listed structural anchoring adhesives. FX‑816 Low‑Temperature Polyester Grout FX‑816 Low‑Temperature Polyester Grout is a three‑component, 100% solids, fast‑setting, flowable, polyester‑based grout designed for anchoring bolts in rail and track applications where reduced downtime is required. Recommended for applications below 50°F (10°C). Packaging / SKU 25 lb. pre-proportioned kit (FX816KT25) is a 3.5 gallon pail consisting of: • ½ gallon can of Component “A” (FX816-.5A) • 4 fl. oz. jar of Component “B” (FX816-.03B) • 20 lb. bag of Component “C” (FX816-C20) 50 lb. pre-proportioned kit (FX816KT50) is a 5 gallon pail consisting of: • 1 gallon can of Component “A” (FX816-1A) • 8 fl. oz. jar of Component “B” (FX816-.06B) • 40 lb. bag of Component “C” (FX816-C40) Color Tan Mixing Ratio Pre-proportioned kit. Use entire contents of all components. Storage Store dry between 45–80°F (7–27°C). Shelf Life 3 months CSI Specification 03 60 00 Grouting RAIL
  • 56. 56 F‑R‑PG13 ©2013 Simpson Strong‑Tie Company Inc. (800) 999-5099 | strongtie.com56 Repair, Protection and Strengthening Systems for Concrete and Masonry RAIL SpecialtyProducts Where to Use • Railway anchor bolt grouting Features • Provides fast turnaround • For installations between 50°F (10°C) and 90°F (32°C) • Excellent chemical resistance • Pourable • High strength Yield • 0.175 ft.3 (0.005 m3 ) per 25 lb. (11.3 kg) kit • 0.35 ft.3 (0.01 m3 ) per 50 lb. (22.7 kg) kit Limitations • Do not apply to surfaces below 50°F (10°C) • Do not apply to surfaces above 90°F (32°C) Please note: This product has not been evaluated for resisting long-term sustained loads in anchor applications. Refer to the current Anchoring and Fastening Systems for Concrete and Masonry catalog or www.strongtie.com for code-listed structural anchoring adhesives. FX‑830 Polyester Grout FX‑830 Polyester Grout is a three‑component, 100% solids, fast‑setting, flowable, polyester‑based grout designed for anchoring bolts in rail and track applications where reduced downtime is required. Recommended for applications above 50°F (10°C). Packaging / SKU 25 lb. pre-proportioned kit (FX830KT25) is a 3.5 gallon pail consisting of: • ½ gallon can of Component “A” (FX830-.5A) • 4 fl. oz. jar of Component “B” (FX830-.03B) • 20 lb. bag of Component “C” (FX830-C20) 50 lb. pre-proportioned kit (FX830KT50) is a 5 gallon pail consisting of: • 1 gallon can of Component “A” (FX830-1A) • 8 fl. oz. jar of Component “B” (FX830-.06B) • 40 lb. bag of Component “C” (FX830-C40) Color Tan Mixing Ratio Pre-proportioned kit. Use entire contents of all components. Storage Store dry between 40–80°F (4–27°C) Shelf Life 3 months CSI Specification 03 60 00 Grouting
  • 57. 57F‑R‑PG13 ©2013 Simpson Strong‑Tie Company Inc. (800) 999-5099 | strongtie.com Repair, Protection and Strengthening Systems for Concrete and Masonry GROUTS (CEMENTITIOUS) SpecialtyProducts Where to Use • For grouting base plates, column bearings, bridge bearing seats, pump bases, tank bases, generators and compressors • As a pre-stress deck beam keyway grout • Grouting of anchor bolts, rebar and dowel bars • In sulfate-rich environments such as wastewater treatment facilities and marine environments Features • Minimum application thickness of 1/2 in. (1.3 cm) neat • Remains highly fluid for applications requiring extended working time • Initial set time of 4 hours for extended working time • High compressive strengths and high early strengths for quick turnaround • Excellent freeze/thaw resistance • Excellent resistance to oils, water and sulfates • Can be pumped or poured • Can be extended with up to 30 lb. (13.6 kg) per bag with 3/8 in. (0.9 cm) coarse aggregate • Ready to use, simply add potable water Yield • 0.5 ft.3 (0.014 m3 ) per 55 lb. (24.9 kg) bag (neat) • 0.68 ft.3 (0.019 m3 ) per 55 lb. (24.9 kg) bag extended with 30 lbs. (13.6 kg) 3/8 in. (0.9 cm) coarse aggregate Limitations • Do not apply to surfaces below 35°F (2°C) • Do not apply to surfaces above 90°F (32°C) • Maximum 161 fl. oz. (4.76 L) of water per 55 lb. (24.9 kg) bag • Minimum application thickness of 1/2 in. (1.3 cm) • Maximum lift thickness of 3 in. (7.6 cm) neat Please note: This product has not been evaluated for resisting long-term sustained loads in anchor applications. Refer to the current Anchoring and Fastening Systems for Concrete and Masonry catalog or www.strongtie.com for code-listed structural anchoring adhesives. FX‑228® High-Strength Non-Shrink Precision Grout FX‑228® High-Strength Non‑Shrink Precision Grout is a high-performance, non-metallic grout developed for long working time and rapid strength gain. Specification Compliance FX-228 exceeds the performance requirements of ASTM C 1107 Grades A, B and C and Corps of Engineers CRD C 621. Packaging / SKU • 55 lb. bag (FX228) Storage Store dry between 40–95°F (4–35°C) Shelf Life 1 year in unopened packaging CSI Specification 03 62 00 Non-Metallic Non Shrink Grout
  • 58. 58 F‑R‑PG13 ©2013 Simpson Strong‑Tie Company Inc. (800) 999-5099 | strongtie.com Repair, Protection and Strengthening Systems for Concrete and Masonry GROUTS (CEMENTITIOUS) SpecialtyProducts Where to Use • For grouting base plates, column bearings, bridge bearing seats, pump bases, tank bases, generators and compressors • As a pre-stress deck beam keyway grout • Grouting of anchor bolts, rebar and dowel bars • In sulfate-rich environments such as wastewater treatment facilities and marine environments Features • Minimum application thickness of 1/2 in. (1.3 cm) neat • High compressive strengths and high- early strengths for quick turnaround • Excellent freeze/thaw resistance • Excellent resistance to oils, water and sulfates • Can be extended with up to 30 lb. (13.6 kg) per bag with 3/8 in. (0.9 cm) coarse aggregate • Ready to use, simply add potable water Yield • 0.5 ft.3 (0.014 m3 ) per 55 lb. (24.9 kg) bag (neat) • 0.68 ft.3 (0.019 m3 ) per 55 lb. (24.9 kg) bag extended with 30 lb. (13.6 kg) of 3/8 in. (0.9 cm) coarse aggregate Limitations • Do not apply to surfaces below 35°F (2°C) • Do not apply to surfaces above 90°F (32°C) • Maximum 161 fl. oz. (4.76 L) of water per 55 lb. (24.9 kg) bag • Minimum application thickness of 1/2 in. (1.3 cm) • Maximum lift thickness of 3 in. (7.6 cm) neat Please note: This product has not been evaluated for resisting long-term sustained loads in anchor applications. Refer to the current Anchoring and Fastening Systems for Concrete and Masonry catalog or www.strongtie.com for code-listed structural anchoring adhesives. FX‑229 Non-Metallic Non-Shrink Construction Grout FX‑229 Non-Metallic Non‑Shrink Construction Grout is a high-performance, non-metallic grout developed for long working time and rapid strength gain. Packaging / SKU • 55 lb. bag (FX229) Storage Store dry between 40–95°F (4–35°C) Shelf Life 1 year in unopened packaging CSI Specification 03 62 00 Non-Metallic Non Shrink Grout
  • 59. 59F‑R‑PG13 ©2013 Simpson Strong‑Tie Company Inc. (800) 999-5099 | strongtie.com Repair, Protection and Strengthening Systems for Concrete and Masonry GROUTS (EPOXY) SpecialtyProducts Where to Use To seat and support machinery and equipment operating under heavy load, high-impact, torque and other high-stress conditions: • Transportation industry utilities • Grout pads • Crushers • Generators • Anchor bolts • Millers • Steam turbines • Crane rails • Blowers • Transformers • Lathes • Power plants • Oil and gas transmission • Pulp and paper mills • Petrochemical plants • Water and wastewater facilities Features • Pre-proportioned, self-contained package provides consistent results • Moisture tolerant, can be used on dry and damp (SSD) surfaces • Superior chemical resistance compared to cement-based grouts • May be placed up to 3 in. (7.6 cm) thick Yield • 0.5 ft.3 (0.014 m3 ) per kit Limitations • Do not apply to surfaces below 50°F (10°C) • Do not apply to surfaces above 90°F (32°C) • Material is a vapor barrier after cure. Concrete surface to receive grout must not exhibit an active moisture vapor drive. • Minimum application thickness is 1/2 in. (1.3 cm). • Maximum installation depth is 3 in. (7.6 cm). • Epoxy grouts can crack due to thermal stress. Do not form more than 4 in. (10.2 cm) beyond the plate to limit thermal cracking • Resistance to in-service chemical exposure must be confirmed for compatibility prior to application Please note: This product has not been evaluated for resisting long-term sustained loads in anchor applications. Refer to the current Anchoring and Fastening Systems for Concrete and Masonry catalog or www.strongtie.com for code-listed structural anchoring adhesives. FX‑1200 Industrial Epoxy Grout FX‑1200 Industrial Epoxy Grout is a three-component, flowable, self-leveling grout composed of 100% solids epoxy resin and proprietary aggregate. Packaging / SKU Pre-proportioned kit (FX1200KT) is a 6 gallon pail containing: • 1 gallon pail of component “A” (FX1200-1A) • 1/2 gallon can of component “B” (FX1200-.5B) • 50 lb. bag of component “C” (FX1200-C) Storage Store dry between 40–95°F (4–35°C). Protect from freezing. Shelf Life 2 years CSI Specification 03 63 00 Epoxy Grouting
  • 60. 60 F‑R‑PG13 ©2013 Simpson Strong‑Tie Company Inc. (800) 999-5099 | strongtie.com Repair, Protection and Strengthening Systems for Concrete and Masonry FX‑70® STRUCTURAL REPAIR AND PROTECTION SYSTEM SpecialtyProducts Attack of structures at the waterline is commonplace in marine environments. Tidal action, river current, salt water exposure, chemical intrusion, floating debris, marine borers, electrolysis and general weathering are all examples of factors affecting the lifecycle of structures in marine environments addressed by the FX‑70® Structural Repair and Protection System. FX‑70® To protect the structure from external attack, the FX‑70 Structural Repair and Protection System starts with a high-strength fiberglass interlocking jacket. The tongue-and-groove seamed jacket provides a corrosion-resistant shell to the repair site, ranges from 1/8 in. to 1⁄2 in. thickness, and is UV-resistant. High-Strength Grouting Materials FX‑70-6 Hydro-Ester® Multi-Purpose Marine Epoxy Grout and FX‑225 Non-Shrink Non-Metallic Underwater Grout are both high- strength, water-insensitive repair compounds. FX‑70-6 MP provides excellent bond to concrete, steel, wood and other common building materials. These products displace existing water and can easily be placed into the FX‑70 jacket without the costly building of cofferdams or dewatering of the repair site. FX‑70-6 MP is ideal for repairs to structures with less than 25% section loss, and is commonly combined with FX‑225 to reduce material cost on large jobs or to repair structures with greater than 25% section loss. Advantages • Repair damage in-place, no need to dewater or take structure out of service • High-strength materials bond well to various substrate materials • Corrosion-free system prevents deterioration, weathering and erosion • Accommodates piles of various shape and size • System is low-maintenance following repair • Safe for use in marine-life habitats • UV-resistant The State of Maryland chose the FX-70® Structural Repair and Protection System to repair and protect more than 300 damaged piles of the Chesapeake Bay Bridge in the mid-1980s. A follow-up inspection of these piles in 2012 showed no deterioration since installation.
  • 61. 61F‑R‑PG13 ©2013 Simpson Strong‑Tie Company Inc. (800) 999-5099 | strongtie.com Repair, Protection and Strengthening Systems for Concrete and Masonry FX‑70® STRUCTURAL REPAIR AND PROTECTION SYSTEM H-shaped Square Octagon Round Custom sizes Technical Specifications Property Test Method Result Water Absorption ASTM D 570 1% Max Compressive Strength — 18,000 psi min. Ultimate Tensile Strength ASTM D 638 15,000 psi min. Flexural Strength ASTM D 796 25,000 psi min. Flexural Modulus of Elasticity ASTM D 790 700,000 psi min. Barcol Hardness ASTM D 2583 45 +/- 5 Each FX‑70 jacket is custom made to the precise specifications of each repair project. As the pioneer in jacket repair, Fox Industries, Inc. (now a part of Simpson Strong-Tie) has refined production and quality control standards over the past 40 years to ensure only the highest-quality products are shipped to the jobsite. Hand-made and assembled in the U.S.A., the FX‑70 jacket has over 40 years of in- service performance. FX‑70 Jackets are available in the following shapes: • Round H-Pile • Square Octagonal SpecialtyProducts
  • 62. 62 F‑R‑PG13 ©2013 Simpson Strong‑Tie Company Inc. (800) 999-5099 | strongtie.com Repair, Protection and Strengthening Systems for Concrete and Masonry UNDERWATER SpecialtyProducts Where to Use Most underwater applications, including: • Pools • Piers • Concrete aquariums • Sumps and pits Features • Ready to use, simply add potable water • Dry pack by hand, no forming necessary • Excellent bond, even underwater Yield • 0.4 ft.3 (0.011 m3 ) per 50 lb. (22.7 kg) bag Limitations • Do not apply to surfaces below 35°F (2°C) • Do not apply to surfaces above 90°F (32°C) • Condition material to 50°F (10°C) prior to placement FX‑70‑8DP Underwater Repair Mortar FX‑70‑8DP Underwater Repair Mortar is a single‑component, rapid‑hardening, cementitious repair mortar designed for hand‑pack applications underwater. Packaging / SKU • 50 lb. (22.7 kg) bag (FX70‑8DP) Storage Store dry between 40–95°F (4–35°C) Color Gray Shelf Life 1 year in unopened packaging CSI Specification 03 01 00 Maintenance of Concrete Where to Use • Underwater repair of concrete, wood and steel • Non‑structural underwater repair of marine structures Features • May be applied underwater • Hand mixed • Bonds well to wet surfaces • Paste viscosity Limitations • Do not apply to surfaces below 50°F (10°C) • Do not apply to surfaces above 100°F (38°C) • Minimum lift thickness of 1/8 in. (0.3 cm) • Maximum lift thickness of 2 in. (5.1 cm) This product has not been evaluated for resisting long-term sustained loads in anchor applications. Refer to the current Anchoring and Fastening Systems catalog or www.strongtie.com for code-listed structural anchoring adhesives. FX‑764 Splash Zone and Underwater Paste FX‑764 Splash Zone and Underwater Paste is a two‑component, 100% solids, moisture‑tolerant, non‑sag, trowel‑grade epoxy designed for use in underwater applications. FX‑764 is ideal for underwater crack sealing, securing injection ports, anchoring, doweling, pinning, and general repair of concrete, steel and wood. Packaging / SKU • 1/2 gallon kit (FX764KT2QT) • 2 gallon kit (FX764KT2) • 4 gallon kit (FX764KT4) • 10 gallon kit (FX764KT10) Color Gray Mixing Ratio 1A:1B Storage Store dry between 40–95°F (4–35°C) Shelf Life 2 years in unopened packaging CSI Specification 03 01 00 Maintenance of Concrete
  • 63. 63F‑R‑PG13 ©2013 Simpson Strong‑Tie Company Inc. (800) 999-5099 | strongtie.com Repair, Protection and Strengthening Systems for Concrete and Masonry EPOXY SpecialtyProducts Where to Use • Pitted steel repair • Stripped threads • Pump impellers • I‑Beam patching • Pumps and valves Features • Bonds well to most steel surfaces • Heat resistant to 400°F (204°C) • When cured can be machined, drilled, tapped and sanded • Can be mixed by hand Limitations • Do not apply to surfaces below 40°F (4°C) • Do not apply to surfaces above 90°F (32°C) • Do not use in-service conditions above 400°F (204°C) • Allow FX‑738 Metal-Filled Epoxy Paste to fully cure before drilling or machining FX‑738 Metal‑Filled Epoxy Paste FX‑738 Metal‑Filled Epoxy is a two‑component, 100% solids, moisture-tolerant, non‑sag, trowel‑grade epoxy designed to repair most metal surfaces found in transportation, industrial, marine, petrochemical and power generation facilities. Available in standard and slow-set (FX‑738S) versions. Packaging / SKU Standard Set: • 1 kg. kit (FX738KT1KG) • 1 gallon kit (FX738KT1) Slow Set: • 1 kg. kit (FX738SKT1KG) • 1 gallon kit (FX738SKT1) Color Gray Mixing Ratio 3A:1B Storage Store dry between 40–95°F (4–35°C) Shelf Life 2 years in unopened packaging FILLERS Where to Use • For use as a filler in epoxy resin systems • Non‑skid wear course in various broadcast coating systems Features • Oven‑dried prior to packaging • Moisture content 0.1% • Hardness MOH scale: 7 minimum • Consistent gradation • Convenient packaging FX‑701 Oven‑Dried Graded Silica Filler (Medium) FX‑701 Oven‑Dried Graded Silica Filler is a special blend of medium‑sized aggregates designed for use with various epoxy resin systems and broadcast flooring applications. Packaging / SKU 60 lb. bag (FX701‑60) Storage Store dry between 40–95°F (4–35°C) Shelf Life 4 years in unopened packaging
  • 64. 64 F‑R‑PG13 ©2013 Simpson Strong‑Tie Company Inc. (800) 999-5099 | strongtie.com Repair, Protection and Strengthening Systems for Concrete and Masonry SOLVENTS SpecialtyProducts Where to Use • Cleaning of pumps, hoses and injection ports used to inject FX‑JETSET products • To prevent build‑up of FX‑JETSET product in pumping equipment or hoses when job conditions require interruption of injection process Features • Formulated to be compatible with most injection/pumping equipment, gaskets and hoses • Designed not to swell or break down solvent resistant gaskets • Soaking aid for removing urethane build‑up Limitations • FX‑JETSET Cleaner is FLAMMABLE! Keep away from high heat, open flame, or other sources of ignition • Do not apply to surfaces above 100°F (38°C) • Use only in well-ventilated areas • Compatibility with specific pump equipment/ hoses/gaskets must be tested prior to use • Do not use on hot equipment. Allow to cool prior to use. FX‑JETSET Cleaner FX‑JETSET Cleaner is a specially formulated solvent designed to dissolve and remove partially or fully cured FX‑JETSET products from pumping equipment, hoses, ports, and other installation components. Packaging / SKU • 1 gallon can (FXJETCLEAN‑1) • 5 gallon pail (FXJETCLEAN‑5) Color Light Amber Storage Store dry between 40–95°F (4–35°C) Shelf Life 4 years Where to Use • Cleaning of pumps, hoses and injection ports used to inject FX‑JETSET products • To prevent build‑up of FX‑JETSET product in pumping equipment or hoses when job conditions require interruption of injection process Features • Non flammable • Formulated to be compatible with most injection/pumping equipment, gaskets and hoses • Designed not to swell or break down solvent resistant gaskets • Soaking aid for removing urethane build‑up Limitations • Do not apply to surfaces above 100°F (38°C) • Use only in well-ventilated areas • Compatibility with specific pump equipment/ hoses/gaskets must be tested prior to use • Do not use on hot equipment. Allow to cool prior to use FX‑JETSET Safety Cleaner FX‑JETSET Safety Cleaner is a specially formulated, non-flammable solvent designed to dissolve and remove partially or fully cured FX‑JETSET products from pumping equipment, hoses, ports, and other installation components. Packaging / SKU • 1 gallon can (FXJETCLEAN‑S1) • 5 gallon pail (FXJETCLEAN‑S5) Color Light Amber Storage Store dry between 40–95°F (4–35°C) Shelf Life 4 years
  • 65. 65F‑R‑PG13 ©2013 Simpson Strong‑Tie Company Inc. (800) 999-5099 | strongtie.com Repair, Protection and Strengthening Systems for Concrete and Masonry SOLVENTS SpecialtyProducts FX‑Epoxy Cleaner Packaging / SKU • 1 gallon can (FXEC-1) • 5 gallon pail (FXEC-5) Storage Store dry between 40–95°F (4–35°C) Shelf Life 4 years in unopened packaging FX‑Epoxy Cleaner is a specially formulated solvent designed to clean and remove epoxy residue from installation equipment and other surfaces. Where to Use • Cleaning of pumps, hoses, installation and spray equipment Features • Formulated to be compatible with most injection/pumping equipment, gaskets and hoses • Designed not to swell or break down solvent resistant gaskets • Soaking aid for removing epoxy build-up • VOC exempt Limitations • FX-Epoxy Cleaner is FLAMMABLE! Keep away from high heat, open flame, or other sources of ignition. • Do not apply to surfaces above 100°F (38°C) • Use only in well-ventilated areas • Compatibility with specific pump equipment/ hoses/gaskets must be tested prior to use • Do not use on hot equipment. Allow to cool prior to use. Where to Use • Curing and sealing freshly placed concrete • For dust‑proofing concrete • As an economical low‑build clear floor sealer • Suitable for interior or exterior applications Features • Low odor • Quick dry and water cleanup • Can be applied by brush, roller or spray • UV resistant • Low VOC • Non flammable Application Rate • 150 ft.2 /gal. (3.7 m2 /L) as a curing and sealing compound • 200–400 ft.2 /gal. (4.9–9.8 m2 /L) per coat as sealer, 2 coats recommended Limitations • Do not apply to surfaces below 40°F (4°C) • Do not apply to surfaces above 110°F (43°C) • Protect from freezing; discard if freezing occurs. • Protect from rain until fully cured • Use of FX‑15 can impair the adhesioin of subsequent coatings, overlays, toppings, sealants, and penetrating sealers. Test for compatibility to insure system compatibility. • Will not prevent rubber tire marks • Product compatibility testing must be performed prior to over‑coating existing sealers FX‑15 Water‑Based Cure and Seal FX‑15 Water‑Based Cure and Seal is an acrylic emulsion, resistant to yellowing from UV exposure. It is designed to prevent rapid water loss during the curing process of freshly placed concrete. Applied to hardened concrete, FX‑15 has a glossy sheen that protects concrete from staining and reduces dusting. Specification Compliance FX‑15 exceeds the performance requirements of ASTM C 309 and AASHTO M‑148 Type 1, Class B. Packaging / SKU • 5 gallon pail (FX15‑5) • 50 gallon drum (FX15‑50) Color Liquid: White Dry: Clear Storage Store dry between 40–95°F (4–35°C). Protect from freezing. Shelf Life 2 years in unopened packaging CSI Specification 03 39 00 Concrete Curing CURING COMPOUNDS
  • 66. 66 F‑R‑PG13 ©2013 Simpson Strong‑Tie Company Inc. (800) 999-5099 | strongtie.com Repair, Protection and Strengthening Systems for Concrete and Masonry NOTES
  • 67. 67F‑R‑PG13 ©2013 Simpson Strong‑Tie Company Inc. (800) 999-5099 | strongtie.com Repair, Protection and Strengthening Systems for Concrete and Masonry NOTES
  • 68. Don't replace. Repair in place. With 40+ years of proven performance, our FX-70® structural repair and protection system repairs concrete, steel and wood piles and protects against further deterioration. From custom-manufactured fiberglass jackets to underwater epoxies and cementitious grouts, we have cost-effective, practical, long-term solutions for your repair projects. Since 1956, Simpson Strong-Tie has brought innovative solutions to customers’ construction challenges. To learn more about our products that repair, protect and strengthen, call us at 800-999-5099 or visit www.strongtie.com/rps. 800-999-5099 www.strongtie.com This flier is effective until June 30, 2014, and reflects information available as of September 1, 2013. This information is updated periodically and should not be relied upon after June 30, 2014; contact Simpson Strong-Tie for current information and limited warranty or see www.strongtie.com. © 2013 Simpson Strong-Tie Company Inc. • P.O. Box 10789, Pleasanton, CA 94588 F-R-PG13 9/13 exp. 6/14

×