PRESENTATION OF PROCEDURE Create by : ADELIA HERLISA X.2 SMA NEGERI 3 UNGGULAN KAYUAGUNG KAB.OKI
<ul><li>HOW TO MAKE </li></ul><ul><li>A ORIGAMI BIRD </li></ul>
<ul><li>While there are many instructions for making the traditional Japanese paper "peace" cranes , these instructions will make a flapping bird - a moving model </li></ul>
INSTRUCTION <ul><li>. 1.Fold the paper from one corner. </li></ul><ul><li>Line up the adjacent sides. </li></ul>2.Cut off the extra
<ul><li>3.Fold both diagonals from </li></ul><ul><li>the same side of the sheet. </li></ul>4.Unfold and turn the paper over
5.Fold horizontally and vertically from the other side. 6. a.Bring the corners together. b.Flatten into a square (along already creased lines)
7. a.Open edge folded to center line. b.Repeat for each open edge. 8.Open your last fold(s)
9. a.Tuck the corner to the inside of the paper, and do this along the creased lines you have made. b.Tuck it fully inside along the previously creased lines. 10.Creation with all four open or "raw" edges tucked inside
11. a.Fold the top point down. b.Flatten it completely downward. 12 a.New "diamond" shape with split point "up". b.Pull a point down and reverse its middle crease.
13. a.Pull down, reverse crease – the base of the point should now be INSIDE the main body of your creation. b.Both points pulled down and reverse creased 14. Pinch the tip of the head point flat (your thumb should be inside the fold), turn it slightly down and reverse its crease to make the head
15.Make your bird flap its "wings“ by holding the chest of the bird with one hand and gently pulling back on the tail. Enjoy! Finished bird
A particular slide catching your eye?
Clipping is a handy way to collect important slides you want to go back to later.