Optional demounts: Available as needed by site conditions. (Demounted sections have j-box and flexible whip on either side of demount when electrical is present in that section. All fasteners and gasketing material is shipped loose with the unit for field installation by installing contractor.)
Wet Bulb Energy Recovery United Metal Products is the industry innovator and leader with regards to effective energy recovery in high dry bulb regions. UMP has spent the last fifteen years perfecting the technology called “Wet Bulb Energy Recovery.” The key to super efficient energy recovery efficiency in the high dry bulb regions of the world is moving the temperature exchange at the wet bulb temperature as opposed to the dry bulb level when the air exits the unit. When this cutting edge method is implemented, energy recovery efficiencies of over 100% can be attained. Not only does this translate into a smaller carbon footprint left on the environment, but it can also mean an increase in an organization’s bottom line.
Cross Flow These systems are the most efficient with regards to sensible energy recovery as they can provide up to 75% efficiency. They also have no moving parts, an extremely compact design, and a competitive cost. Heat Wheel These systems run up to 65% efficient with regards to sensible energy recovery. The main advantage of the heat wheel is that it has minimal moving parts. However, the size of the heat wheel determines the size of the unit and this limits design flexibility. Heat Pipes These systems run between 55%-65% efficient with regards to sensible energy recovery. The main advantage of these units is that they have no moving parts which means very little maintenance is necessary. They provide the highest CFM of the energy recovery units and are offered in custom configurations.