Furnaces for electronic components type 003

Diffusion furnaceThis is a tube-type furnace with 3 or more heating zones. Temperatureaccuracy in the diffusion zone.±- 0.5-1° C. High-precision SOLO tempera-ture control. Maximum temperature 1500° C. The housing is air or watercooled. Programme controller and recorder on request. ",, 1 , ,Furnace for thick filmsFurnace for ceramic condensersThis is a passage furnace for oxidation, reducing, sintering and firing. Firing ofsilver coating on condensers and resistors. Several heating zones. Protectivegas atmosphere for oxidation or oxygen-free atmosphere for reduction. Tempe-rature characteristics in accordance with requirements. Maximum temperature1100-1200° C. Temperature control in accordance with users wishes up to.±- 1° C. Furnace dimensions are adapted to specifie production requirements. .....•• " -... , Ij ,, J / 1.. ~ -, ••••• i~Glass smelting furnace (transistor bases, diodes etc)This is a passage furnace for smelting transistor bases, diodes, etc. Con-trolled protective gas atmosphere for oxidation and reduction over entirefurnace length. Maximum temperature 1100° C. Temperature control asrequired to.±- 1° C. Dimensions are adapted to given production requirements. www.soloswiss.com

l Passage furnace for hard soldering, soldering, degassing, annealing, stabilizing This is a passage furnace with one or several heating zones and operation with protective atmosphere. Maximum temperature 1100° C. Hard soldering and soldering of ferrous and non-ferrous metals without oxidation. Soldering with copper. Annealing, stress-relieving, stabilizing under protective gas. Treatment without any oxidation whatsoever of special steels and stainless steels. Protective gas generator for cracked ammonia incorporated in furnace. 15 standard models with 1 or 2 channels. Protective atmosphere passage furnace up to 1500° C Passage furnaces with several heating zones permit operation in protective atmbsphere (H" 0" N" CO" air) up to 1500° C. Conveyorization by hydraulic longitudinal and transverse movement of ceramic plates permitting continuous operation. Hydraulic system with programming. Temperature control as required to .±- 1° C. Dimensions in accordance with specifie production requirements. Passage furnace for copper Beryllium For hardening or soft annealing of copper Beryllium as bulk goods in tanks. Very accu rate temperature control. Maximum temperature 500° C. This plant is also suitable for structure hardening of steel. We also supply furnaces for hardening by continuous passage method employing copper Beryllium belts.Smelting zone regeneratingfurnace, 1500° C, Drying furnaces Infra-red furnaces Tubular furnaces Special furnaces 1600° C muffle furnace www.soloswiss.com

Furnaces for electronic components type 003

by Thermic Service Ltd on Dec 12, 2011

Accessibility

Categories

Upload Details

Usage Rights

Statistics

Furnaces for electronic components type 003 Document Transcript