• Share
  • Email
  • Embed
  • Like
  • Save
  • Private Content
ISOMAT_Product List_ 2012
 

ISOMAT_Product List_ 2012

on

  • 1,090 views

 

Statistics

Views

Total Views
1,090
Views on SlideShare
1,090
Embed Views
0

Actions

Likes
0
Downloads
8
Comments
0

0 Embeds 0

No embeds

Accessibility

Categories

Upload Details

Uploaded via as Adobe PDF

Usage Rights

© All Rights Reserved

Report content

Flagged as inappropriate Flag as inappropriate
Flag as inappropriate

Select your reason for flagging this presentation as inappropriate.

Cancel
  • Full Name Full Name Comment goes here.
    Are you sure you want to
    Your message goes here
    Processing…
Post Comment
Edit your comment

    ISOMAT_Product List_ 2012 ISOMAT_Product List_ 2012 Document Transcript

    • Product ListIndustrial Floorings Premixed Plasters Repairing Materials Tile Adhesives Concrete & Mortar Waterproofing & Paints & Grouts Additives Materials
    • CONTENTS Page1. Waterproofing Materials1.1 Waterproofing of Basements & Tanks 41.2 Waterproofing of Terraces 61.3 Waterproofing of Walls 91.4 Complementary Waterproofing Products - Reinforcements 111.5 Waterproofing Materials for Joints 131.6 Roofing Membranes 161.7 Drainage Membranes 172. Concrete & Mortar Additives2.1 Concrete Additives 222.2 Mortar Additives 252.3 Auxiliary Concreting Agents 263. Tile Adhesives & Grouts3.1 Tile Adhesives 303.2 Tile Grouts 343.3 Adhesives for Special Applications 393.4 Complementary Products 424. Repairing Materials & Paints4.1 Strengthening & Repairing of Concrete 44 4.1.1 Cement-Based Materials 44 4.1.2 Epoxy-Based Materials 46 4.1.3 Fibre Reinforced Polymers (F.R.P.) 484.2 Construction and Repairing of Masonry Wall 494.3 Putties, Paints & Protective Materials 50 4.3.1 Putties 50 4.3.2 Emulsion Paints & Primers 53 4.3.3 Acrylic Paints & Primers 54 4.3.4 Enamel Paints & Primers 56 4.3.5 Epoxy Paints & Primers 56 4.3.6 Protective materials & Varnishes 584.4 Cleaning Agents 604.5 Elastic Joint Sealants 624.6 Bituminous Repairing Materials 655. Premixed Plasters5.1 Cement-Based Plasters 685.2 Acrylic Plasters 715.3 Silicone Plasters 725.4 Plaster Primers 735.5 Plastering Reinforcement Materials 746. Industrial Floorings6.1 Cement-Based Floorings 766.2 Impregnations for Cement-Based Floorings 776.3 Epoxy-Cement Based Floorings 786.4 Epoxy-Based & Polyurethane-Based Floorings 78AppendixTools & Accessories 84Product Index 86
    • 1. Waterproofing Materials 1.1 Waterproofing of Basements & Tanks 1.2 Waterproofing of Terraces 1.3 Waterproofing of Walls 1.4 Complementary Waterproofing Products - Reinforcements 1.5 Waterproofing Materials for Joints 1.6 Roofing Membranes 1.7 Drainage Membranes 3
    • 1. Waterproofing Materials1.1 Waterproofing of Basements & Tanks PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/BOX PS/E.-PAL. AQUAMAT Cement-based, brushable sealing slurry. It offers total Grey 0317/1 waterproofing against water pressure up to 7 atm according to 25 kg 54 DIN 1048. Ideal for waterproofing basements and reservoir 5 kg 4 160 tanks. Suitable for potable water tanks according to W-347, White ISO 8467. Ideal for the internal (negative side) waterproofing of underground areas, since it can withstand negative water 25 kg 54 pressure. 5 kg 4 160 Color: Grey, white, light blue. Light Blue Cement-based brushable 25 kg 54 sealing slurry Consumption: 2,0-4,0 kg/m2. AQUAMAT-MONOFLEX Flexible, one-component, polymer-modified brushable sealing 18 kg 54 0317/1 slurry. It is used for waterproofing surfaces of concrete, plaster, NEW brick, cement, mosaics etc. Suitable in cases where elasticity of the waterproofing layer is required, such as roofs and bathrooms that will be covered with tiles, inverted roofs, under ground tanks etc. Color: Grey. Flexible, one-component, Consumption: brushable sealing slurry 2,0-4,0 kg/m2 AQUAMAT-FLEX Flexible, two-component brushable sealing slurry (25 kg of Grey 0314/1 cement powder + 8 kg of resin emulsion). Suitable for 33 kg 54(A) waterproofing substrates that show or are expected to show (A+B) 54(B) haircracks due to contractions-expansions or vibrations. Ideal for surfaces that will be covered with tiles, inverted roofs, under ground water tanks etc. Color: Grey. 18 kg 18 Packages: 33 kg (25 kg A+8 kg B), (A+B) (A+B) 18 kg (13,6 kg A+4,4 kg B) Flexible, 2-component, brushable sealing slurry Consumption: 2,0-4,0 kg/m2. AQUAMAT-ELASTIC Elastic, two-component brushable sealing slurry. Suitable for Grey 0338/1 waterproofing substrates that show or are expected to show 35 kg 54(A)(B) haircracks due to contractions-expansions or vibrations. Ideal White for roofs, flower stands, swimming pools, tunnels, above ground water tanks etc. Also, for waterproofing under tiles combined 35 kg 54(A) with the elastic tile adhesive Isomat AK-ELASTIC. (A+B) 54(B) Color: Grey, white. 18 kg 18 Packages: 35 kg (25 kg A+10 kg B), (A+B) (A+B) Elastic, 2-component, 18 kg (12,9 kg A+5,1 kg B) & 7 kg (5 kg A+2 kg B). 7 kg 48 brushable sealing slurry Consumption: 2,0-4,0 kg/m2. (A+B) (A+B) AQUAMAT-PENETRATE Cement-based brushable sealing slurry. It penetrates the mass 20 kg 54 0344/1 of the concrete and waterproofs it. It remains permanent active, and therefore, it continuously protects construction from any water attack presence. It is capable of sealing hair cracks, even if they appear afterwards. It has resistance to both positive and negative water pressure. Suitable for waterproofing basements, foundations, manholes and tanks. Color: Grey. Brushable sealing slurry Consumption: 1,5 kg/m2. with crystallizing effect4
    • Waterproofing of Basements & Tanks PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/BOX PS/E.-PAL. AQUAFIX Rapid setting cement for instant plugging and sealing of water 15 kg 32 0315/1 leaks. 5 kg 4 75 Color: Grey. 1 kg 15 240 Consumption: Approx. 1,6 kg/lit. Rapid-setting cement for instant sealing of water leaks DUROPRIMER-SG Two-component, solvent-free epoxy primer. It is used as a 10 kg 42 0402/2 waterproofing layer on floors that are subjected to coatings (A+B) (A+B) that face problems with rising damp and will be covered with epoxy flooring systems or cement screeds. Moreover, it can be used as a primer under the DUROFLOOR epoxy system on substrates that are still damp or oil contaminated (first, the substrate should be cleaned from oils). Color: Light beige. Two-component epoxy primer for concrete Consumption: floors 600-1000 g/m2. AQUAMAT ADMIX Concrete waterproofing admixture in powder form that is added 20 kg 54 0317/1 during concrete preparation forming insoluble crystalline NEW compounds. Improves resistance to water permeability and does not affect vapor permeability of concrete. It remains permanently active and receives equally well positive and negative hydrostatic pressure. Suitable for waterproofing foundations, basements, tanks, wastewater treatment, swimming pools etc. Color: Grey. Concrete waterproofing admixture with Consumption: 0,8-1,2 kg per 100 kg of cement. crystallizing effect PLASTIPROOF Plasticizer-waterproofing admixture (ASTM C-494, type A, *1000 kg 0120/1 ELOT EN 934-2:T2 & T9). Used for formulating concrete with 240 kg 2 low water permeability and improved physical properties. 20 kg 39 Color: Dark brown. 5 kg 4 72 Consumption: 0,2-0,5 kg per 100 kg of cement. Plasticizer, type A - Concrete waterproofing admixture* Packages marked with an asterisk are available 3 days after reception of order. 5
    • Waterproofing Materials1.2 Waterproofing of Terraces PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/BOX PS/E.-PAL. ISOFLEX Brushable elastomeric liquid membrane possessing high *150 kg 3 0201/1 elasticity and durability. Used for jointless and seamless 25 kg 24 waterproofing of terraces. 15 kg 44 Color: White, redbrown. 5 kg 4 110 Consumption: 1 kg 12 360 1,0-1,5 kg/m2. Brushable elastomeric waterproofing membrane ISOFLEX-T25 Brushable elastomeric liquid membrane possessing high *150 kg 3 0225/1 elasticity and durability even to extreme temperature conditions 25 kg 33 (from -250C to +1200C). Used for the continuous, free of seams 15 kg 42 or joints, elastic, vapor-permeable waterproofing of 5 kg 4 72 terraces. Color: White, redbrown (The redbrown color is available in 1 kg 12 360 1 kg, 5 kg and 15 kg packages.) Brushable elastomeric Consumption: waterproofing membrane 1,0-1,5 kg/m2. ISO-PRIMER Primer of ISOFLEX and ISOFLEX-T25. 20 kg 39 0206/1 Color: White. 5 kg 4 72 1 kg 12 324 Consumption: 0,2-0,3 kg/m2. Primer of brushable elastomeric waterproofing membranes ISOFLEX-PU One-component brushable, polyurethane, liquid membrane. 25 kg 33 0226/1 Used for the continuous, free of seams or joints, elastic, 6 kg 4 120 vapor-permeable waterproofing of terraces. 1 kg 16 320 Color: White. Other colors by order. Consumption: 2 Approx. 1,5 kg/m . Brushable polyurethane waterproofing membrane PRIMER-PU Primer of ISOFLEX-PU. 17 kg 33 0227/1 Color: Transparent. 5 kg 4 120 1 kg 12 360 Consumption: 0,2-0,3 kg/m2. Primer of ISOFLEX-PU6
    • Waterproofing of Terraces PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/BOX PS/E.-PAL.SM-16 Solvent used to dilute polyurethane coatings. Especially suitable 5 lit 4 721407/1 for diluting the brushable polyurethane waterproofing membrane ISOFLEX-PU, when applied by spraying. It can also clean tools used for the application of ISOFLEX-PU and also tools from epoxy coatings residues. Additionally it can be used as a thinner for epoxy coatings. For polyurethane coatings SM- 16 is added in a proportion up to 10% by weight.Special solvent forpolyurethane coatingsAQUAMAT-MONOFLEX Flexible, one-component, polymer-modified brushable sealing 18 kg 540317/1 slurry. It is used for waterproofing surfaces of concrete, plaster, NEW brick, cement, mosaics etc. Suitable in cases where elasticity of the waterproofing layer is required, such as roofs and bathrooms that will be covered with tiles, inverted roofs, under ground tanks etc. Color: Grey.Flexible, one-component, Consumption:brushable sealing slurry 2,0-4,0 kg/m2.AQUAMAT-FLEX Flexible, two-component brushable sealing slurry (25 kg of Grey0314/1 cement powder + 8 kg of resin emulsion). Suitable for 33 kg 54(A) waterproofing substrates that show or are expected to show (A+B) 54(B) haircracks due to contractions-expansions or vibrations. Ideal for surfaces that will be covered with tiles, inverted roofs, under ground water tanks etc. Color: Grey. 18 kg 18 Packages: 33 kg (25 kg A+8 kg B), (A+B) (A+B) 18 kg (13,6 kg A+4,4 kg B)Flexible, 2-component,brushable sealing slurry Consumption: 2,0-4,0 kg/m2.AQUAMAT-ELASTIC Elastic, two-component brushable sealing slurry. Suitable for Grey0338/1 waterproofing substrates that show or are expected to show 35 kg 54(A)(B) haircracks due to contractions-expansions or vibrations. Ideal White for roofs, flower stands, swimming pools, tunnels, above ground 35 kg 54(A) water tanks etc. Also, for waterproofing under tiles combined (A+B) 54(B) with the elastic tile adhesive Isomat AK-ELASTIC. Color: Grey, white. 18 kg 18 Packages: 35 kg (25 kg A+10 kg B), (A+B) (A+B)Elastic, 2-component, 18 kg (12,9 kg A+5,1 kg B) & 7 kg (5 kg A+2 kg B). 7 kg 48brushable sealing slurry Consumption: 2,0-4,0 kg/m2. (A+B) (A+B)ISOGUM P Plastomeric bituminous membrane (APP) reinforced with Roll0801/4 polyester cloth (180 g/m2) with or without mineral chipping. 1m x 10m Fixed by torch welding without using bituminous glue. (10 m2) PLAIN MEMBRANES ISOGUM 4 P (4,0 kg/m2). 25 MEMBRANES WITH MINERAL CHIPPINGPlastomeric bituminous ISOGUM 4 P MIN (4,0 kg/m2). 25membrane (APP) ISOGUM 4,5 P MIN (4,5 kg/m2). 23reinforced with polyestercloth of 180 g/m2 ISOGUM 4,5 P MIN WHITE (4,5 kg/m2). 23 7
    • Waterproofing MaterialsWaterproofing of Terraces PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/BOX PS/E.-PAL. ISOGUM 3V Plastomeric bituminous membrane reinforced with fiberglass Roll 30 0810/4 tissue (50 g/m2). Fixed by torch welding without using 1m x 10m bituminous glue. (10m2) Weight: 3,0 kg/m2. Plastomeric bituminous membrane reinforced with fiberglass tissue (50g/m2) ISODIEN 4 PF ALU Elastomeric bituminous membrane reinforced with polyester Roll 25 0811/4 cloth (150 g/m2) and covered with aluminium sheet. Fixed by 1m x 10m torch welding without using bituminous glue. (10m2) Weight: 4,0 kg/ m2. Elastomeric bituminous membrane covered with aluminium sheet ISOPAST Bituminous emulsion with excellent adhesion and resistance to 19 kg 36 1014/6 acid and alkaline solutions. Used for waterproofing foundations, 5 kg 120 retaining walls, floors, inclined (pitched) roofs etc. Also used as a primer for fixing bituminous membranes. Color: Black. Consumption: Approx. 0,2-1,0 kg/m2/layer. Bituminous emulsion ISOLAC-BT Bituminous waterproofing varnish with solvents. Provides 17 kg 36 1015/6 (former ISOLAC) excellent adhesion to all kinds of substrates and water 5 kg 120 impermeability. Used as a primer for fixing bituminous membranes, as a vapor-barrier in insulations, and for protecting concrete or metal surfaces from moisture (protection against oxidation). It is applied in 1-3 layers by roller or brush. Color: Black. Consumption: On metal surfaces: 100-150 g/m2/layer. Bituminous varnish On concrete surfaces: 250-300 g/m2/layer. ISOMAC Bituminous mastic with excellent adhesion and elasticity. It can 20 kg 36 1018/6 be cold-applied with a smooth trowel. Suitable for sealing joints 5 kg 120 on horizontal and vertical surfaces, for sealing-bridging hair cracks and for flashing (sealing) difficult points during the fixing of bituminous membranes (drainpipes, joints or junctions in parapets etc). Also used for repairing in waterproofing layers formed by bituminous membranes. Color: Black. Bituminous mastic Consumption: 1,2-1,3 kg/lit.8
    • Waterproofing of Terraces PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/BOX PS/E.-PAL. ISOPAST-RUBBER Elastomer bituminous emulsion consisting of high quality 19 kg 36 1014/6 asphalt, resins and special additives. It has high durability in moisture and excellent elasticity. Provides excellent adhesion on various substrates like concrete, metal, wood etc. It is used for waterproofing foundations, retaining walls, terraces, roofs, etc. Color: Brown-black. Elastomer bituminous Consumption: emulsion 0,35-0,50 kg/m2/layer.* Packages marked with an asterisk are available 3 days after reception of order.1.3 Waterproofing of Walls PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/BOX PS/E.-PAL. FLEXCOAT Elastic, waterproofing paint. Offers total water impermeability White 0202/6 for the protection of walls against rain. It has high elasticity and 44 10 lit crack bridging ability on surfaces that show hairline cracks. 3 lit 4 110 Suitable for painting and waterproofing walls, protecting of bituminous layers etc. For exterior and interior use. Colors: White. NCS 266 selected colors NCS pallet (minimum order Pallet quantity 10 lit). 10 lit 44 High quality, elastic, 3 lit 4 110 Coverage: 8-12 m2 per liter. waterproofing paint FLEX-PRIMER Highly penetrative, polymer aqueous emulsion. Used in 20 kg 39 0224/6 combination with the highly elastic waterproofing paint 10 kg 44 FLEXCOAT, it forms an ideal system for the waterproofing of 5 kg 4 72 walls. It is also the ideal primer for the acrylic pasty plaster 1 kg 12 324 MARMOCRYL. Color: White. Coverage: 5-10 m2/kg. The package of 10kg is available in round, plastic container that High quality acrylic is useful for preparing colored primer. A colored primer is water-based primer necessary when the substrates will be covered with acrylic plasters of base D & TR. NAN0-SEAL Highly penetrative, polymer emulsion. Applied on porous 220 kg 2 0228/1 substrates stabilizes and protects them from the humidity and 5 kg 4 72 the creation of salt stains. Nano-seal prevents the growth of 1 kg 12 324 mould and fungi on the surface of the substrate. It can be over- coated with paint. Color: Light blue (transparent after drying). Waterproofing and Consumption: stabilisation of surfaces 100-200 g/m2 depending on the absorptivity of the substrate. 9
    • Waterproofing MaterialsWaterproofing of Walls PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/BOX PS/E.-PAL. PS-20 Ready-to-use, silicone-based, transparent solution with 20 lit 24 (former PROTESIL) solvents for waterproofing. It ensures extremely high water- 3 lit 4 120 0207/1 repellence and long term protection. It can be applied on 1 lit 18 288 various surfaces (natural or synthetic stone, unpainted plaster, exposed masonry, decorative bricks, roof tiles, tiles, exposed concrete etc.) for their protection against rain effect. Also suitable for waterproofing tile joints. Color: Transparent Silicone-based solution for waterproofing Consumption: 0,2-0,4 lit/m2. PS-21 Ready-to-use, silicone-based solution without solvents for 20 lit 39 (former PROTESIL-W) waterproofing. It ensures extremely high water-repellence and 5 lit 4 72 0207/1 long term protection. It is suitable for waterproofing of tile joints 1 lit 12 324 and the protection against rain effect of various surfaces like natural or synthetic stone, plaster, exposed masonry, decorative bricks, roof tiles, tiles, unpolished marble, exposed concrete etc.). It can be used even on slightly wet substrates. Color: White (transparent after drying) Silicone-based solution without solvents for Consumption: 0,2-0,4 lit/m2. waterproofing NANOPRO-C Water-based emulsion with high penetrating ability, based on 220 lit 2 0228/1 nano-molecular structure. Protects porous surfaces from 20 lit 39 moisture and salt stains. Suitable for concrete, masonry, plaster, 5 lit 4 72 tile grouts, gypsum boards, chip boards, natural stones etc. For 1 lit 12 324 indoor and outdoor applications. Color: White (transparent after drying). Consumption: Nano-impregnation for 100-200 ml/m2, depending on the substrates absorptivity. protecting porous surfaces NANOPRO-M Water-based emulsion with highly penetrating ability based on 220 lit 2 0228/1 nano-molecular structure. Protects unporous surfaces, from 20 lit 39 moisture and salt stains. Suitable for polished marbles, granites, 5 lit 4 72 tiles, porcelain etc. For indoor and outdoor applications. 1 lit 12 324 Color: White (transparent after drying) Consumption: Nano-impregnation to 50-70 ml/m2, depending on the substrates absorptivity. protect surfaces against oils NANOPRO-L Water-based emulsion with high penetrating ability, based on 20 lit 39 0228/1 nano-molecular structure. Protects porous and slightly porous 5 lit 4 72 surfaces (marbles, granites etc) from oil stains, moisture and 1 lit 12 324 salt stains and prevents from fungi-mould growth. Suitable for concrete, masonry, plaster, tile grouts, gypsum boards, chip boards, natural stones etc. For indoor and outdoor applications. Color: White (transparent after drying) Nano-impregnation to protect surfaces against Consumption: oils 50-100 ml/m2, depending on the substrates absorptivity.10
    • Waterproofing of Walls PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/BOX PS/E.-PAL. ISOMAT SL 17 Solvent-free elastomeric liquid membrane possessing high 15 kg 44 0523/3 elasticity and durability. Used under tiles for jointless and 5 kg 110 seamless waterproofing of sanitary areas like bathrooms, showers etc. It can be applied by roller or spatula on concrete, plaster, gypsum-board, chipboard etc. Color: Grey. Consumption: Elastomeric liquid 1,0-1,5 kg/m2, depending on the nature of the substrate. membrane for waterproofing under tiles AQUAMAT-F Aqueous silicate solution used against rising damp on walls *170 kg 3 0215/1 made of concrete or masonry. It can be applied either by 25 kg 26 impregnation or by a borehole procedure. 6 kg 4 72 Color: Transparent. Consumption: By boreholes: Approx. 18 kg/m2 of walls cross-section. By impregnation: 200-300 g/m2 of wall’s surface. Damp course against capillary rising damp* Packages marked with an asterisk are available 3 days after reception of order.1.4 Complementary Waterproofing Products - Reinforcements PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/BOX FIBERGLASS MESH 100 cm wide mesh Roll made of fibreglass, for total reinforcing of waterproofing layers 1 m x 50 m FOR (e.g. ISOFLEX membrane) in tough cases of multiple cracking. WATERPROOFING (50 m2) Weight: approx. 65 g/m2. LAYERS Mesh: 1,0 mm x 2,0 mm. 1205/1 Roll 10 cm wide tape 10 cm x 50 m 20 made of the same material as above, used for the local reinforcing of ISOFLEX membrane along cracks or joints. TREVIRA Thin polyester cloth Roll 1203/1 of 30 g/m2, used for reinforcing of waterproofing layers such 1 m x 100 m as ISOFLEX, AQUAMAT-ELASTIC etc. (100 m2) 10 cm wide tape made of the same material as above, used for the local 1 m x 200 m reinforcing of waterproofing layers along cracks, joints or (200 m2) wall-floor junctions. Polyester cloth for Roll reinforcing waterproofing layers 10 cm x 50 m 20 11
    • Waterproofing MaterialsComplementary Waterproofing Products - Reinforcements PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/BOX WATERPROOFING Special parts made of thermoplastic elastomer for waterproofing of moistured places. MATERIALS FOR MOISTURED PLACES 0630/1 Roll Joint sealing tape. 12 cm x 50 m 1 Roll 12 cm x 10 m 1 Inner corner. 14 cm x 14 cm 25 Outer corner. 21 cm x 21cm 25 Wall sealings. 12 cm x 12 cm 25 Bottom sealings. 42,5 cm x 42,5 cm 10 ISOMAT BUTYL TAPE Self-adhesive butyl tape coated with non-woven polypropylene. Roll 0719/1 Used in wet areas for waterproofing under tiles, especially in 8 cm x 10 m 60 places where there are cracks, joints etc. It can be covered with tile adhesives or brushable waterproofing materials. Thickness: 0,9 mm Self adhesive butyl tape12
    • Complementary Waterproofing Products - Reinforcements PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/E.-PAL.WATERPROOFING Suitable for waterproofing and uncoupling of sound and Roll& UNCOUPLING problematics substrates. Especially used in damp areas and on 1 m x 15 m 28 terraces, balconies etc. It can be placed on walls or floors andMEMBRANE on a variety of substrates such as concrete, cement mortars,0719/1 old tile layers, mosaics, masonry etc.1.5 Waterproofing Materials for Joints PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/BOX PS/E.-PAL. TIXOPHALTE Ready-to-use, cold-applied elastoplastic adhesive bituminous Black 0624/6 mastic sealant. Possesses superior permanent flexibility and 310 ml 24 1.440 excellent adhesion to all kinds of materials under various conditions, even underwater. Color: Black. Consumption: Approx.1,4 kg/lit of joint volume. Elastoplastic & adhesive bituminous mastic sealantELASTOTAN Elastomeric sealing and adhesive mastic with exceptional Grey 0607/6 adhesion to all building materials e.g. glass, aluminium, wood, 600 ml 15 PVC etc. It features high mechanical strength and resistance to 280 ml 25 1.125 ageing and weather conditions. Suitable for sealing joints 3 to 50 mm wide. Color: White, grey. White Consumption: 600 ml 15 Joint 10 mm x 10 mm: 1 cartridge/2,8 m of joint length. 280 ml 25 1.125 Elastomeric adhesive Joint 5 mm x 5 mm: 1 cartridge/11,2 m of joint length. mastic sealantDOMOSIL High performance, general-purpose silicone sealant for sealing Transparent 0623/6 joints 3 to 40 mm wide, on surfaces of non-porous materials 280 ml 25 1.125 such as glass, aluminum, porcelain (e.g. tiles), ceramic etc. It cannot be overpainted. White Color: Transparent, white. 280 ml 25 1.125 Consumption: Joint 10 mm x 10 mm: 1 cartridge/3 m of joint length. Joint 5 mm x 5 mm: 1 cartridge/12 m of joint length. General-purpose silicone sealant 13
    • Waterproofing MaterialsWaterproofing Materials for Joints PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/BOX PS/E.-PAL. DOMOSIL-S High performance, mildew resistant silicone sealant for sealing Transparent 0622/6 joints 3 to 40 mm wide, on surfaces of non-porous materials 280 ml 25 1.125 such as glass, aluminum, porcelain (e.g. tiles), ceramic etc. Also suitable for applications in high moisture sanitary areas such as bathrooms and kitchens, as well as in hospital areas, White laboratories etc. Prevents fungi development that creates stains 280 ml 25 1.125 and black spots. It is not recommended for aquariums since it contains fungicide. It cannot be overpainted. Color: Transparent, white. Mildew-resistant silicone Consumption: Joint 10 mm x 10 mm: 1 cartridge/3 m of joint sealant length. Joint 5 mm x 5 mm: 1 cartridge/12 m of joint length. DOMOSIL-MICRO High performance, anti-mould silicone sealant with built-in Transparent 0622/6 Microban® antibacterial protection technology. Remains color 280 ml 12 900 stable even after 10 years. Appropriate for sealing joints of 3- 40mm wide in non-porous materials such as glass, aluminium, White porcelain and non-porous ceramics. It is applied in high humidity areas such as kitchens, bathrooms, etc. It is not 280 ml 12 900 recommended for use in aquariums and cannot be overpainted. Color: Transparent, white. Anti-mould silicone Consumption: Joint 10mm x 10mm: 1 cartridge/3 m of joint sealant with built in length. Joint 5mm x 5mm: 1 cartridge/12 m of joint length. Microban® technology DOMOSIL-POOL Silicone sealant resistant to permanent water immersion such Transparent 0622/6 as swimming pools, aquariums etc. Appropriate for sealing 280 ml 25 1.125 vertical or horizontal joints 3-40mm wide, for indoor and outdoor applications. It has very good adhesion on surfaces such as glass, porcelain, aluminium, ceramics etc. Suitable for sealing joints on boats, glass- structures etc. It cannot be overpainted. Color: transparent. Silicone sealant for Consumption: permanent water Joint 10mm x 10mm: 1 cartridge/3 m of joint length. mmersion Joint 5mm x 5mm: 1 cartridge/12 m of joint length. FLEX PU-20 One-component, solvent-free polyurethane sealing mastic. Ideal Grey 0627/6 for sealing joints where high elasticity is required. Suitable for 600 ml 20 1.000 joints in concrete, brickwork, natural and synthetic stones, steel, 310 ml 12 1.560 aluminium, wood, ceramic tiles, rigid plastic etc. For outdoor and indoor applications. Color: Grey, white. White 600 ml 20 1.000 Consumption: Polyurethane construction Joint 10 mm x 10 mm: 1 cartridge/3 m of joint length. joint sealant Joint 5 mm x 5 mm: 1 cartridge/12 m of joint length. FLEX PU-40 One-component, solvent-free polyurethane sealing and adhesive Grey 0626/6 mastic. Exceptional adhesion to all building materials, e.g. 600 ml 20 1.000 concrete, brickwork, natural and synthetic stones, steel, 310 ml 12 1.560 aluminium, wood, ceramic tiles, rigid plastic etc. For outdoor and indoor applications. White Color: White, grey, brown. 600 ml 20 1.000 310 ml 12 1.560 Consumption: Brown Joint 10 mm x 10 mm: 1 cartridge/3 m of joint length. 600 ml 20 1.000 Polyurethane adhesive Joint 5 mm x 5 mm: 1 cartridge/12 m of joint length. and sealant 310 ml 12 1.56014
    • Roofing Membranes PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/BOX PS/E.-PAL.FLEX PU-30 S One-component, polyurethane sealing mastic with solvents. Grey0626/6 Ideal for sealing joints where high elasticity is required. Suitable 600 ml 15 750 NEW for joints 5-50mm wide in concrete, brickwork, natural and 310 ml 25 1500 synthetic stones, steel, aluminium, wood, ceramic tiles etc. For outdoor and indoor applications. Color: Grey, white. White 600 ml 15 750 Consumption: 310 ml 25 1500Polyurethane sealant Joint 10mm x 10mm: 1 cartridge/3 m of joint length. Joint 5mm x 5mm: 1 cartridge /12 m of joint length.FLEX PU-50 S One-component, polyurethane sealing and adhesive mastic with Grey0626/6 solvents. Exceptional adhesion to all building materials, e.g. 600 ml 15 750 NEW concrete, brickwork, natural and synthetic stones, steel, 310 ml 25 1500 aluminium, wood, ceramic tiles etc. Suitable for joints 5-30mm wide. For outdoor and indoor applications. White Color: Grey, white. 600 ml 15 750 Consumption: 310 ml 25 1500Polyurethane adhesive Joint 10mm x 10mm: 1 cartridge/3 m of joint length.and sealant Joint 5mm x 5mm: 1 cartridge /12 m of joint length.FLEX PU-2K Two-component joint sealant based on polyurethane resins. 5 kg 4(A) 27(A)0633/6 Ideal for sealing horizontal and vertical concrete joints in floors (A+B) 6(B) 18(B) NEW and structures like reservoirs, canals etc. Available in two types: FLEX PU-2KV: For vertical surfaces. FLEX PU-2KH: For horizontal surfaces Color: Grey2-component Consumption: 1,45 kg/lit of joint volumepolyurethane joint sealantFLEX MS-45 Elastomeric sealing and adhesive mastic with excellent bonding Grey0629/6 to any kind of building material such as glass, aluminium, wood, 280 ml 25 1.125 PVC etc. It features high mechanical strength and great endurance to ageing. It is also suitable for slightly wet substrates. It is used for strong, elastic adhesions. Redbrown Color: Grey, redbrown. 280 ml 25 1.125 Consumption:Elastomeric adhesive Indicative consumption: 1 cartridge /10 linear meters.and sealantWATERSTOP 1520 Tape made of special treated bentonite and caoutchouc. Roll0625/6 Suitable for sealing and waterproofing work joints in concrete 30 m/box 30 elements (e.g. work joints between concrete slab and concrete wall). Dimensions: 15 mm x 20 mm.Swelling bentonite tape 15
    • Waterproofing Materials1.6 Roofing Membranes PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/E.-PAL. DELTA-FOL PVG Roofing membrane placed underneath the tile-bearing laths. Roll 0701/4 Provides complete waterproofing, allows breathing of the roof, 1,5 m x 50 m 25 possesses great mechanical strength and it is easily applied 2 due to its light weight (approx. 14,5 kg/roll). (75 m ) It is ideal for application in ventilated roofs with sheathing. Roofing membrane for ventilated roofs DELTA-FOL PVE Roofing membrane placed underneath the tile-bearing laths. Roll 0715/4 Provides complete waterproofing, allows breathing of the roof, 1,5 m x 50 m 32 possesses great mechanical strength and it is easily applied due to its light weight (approx. 12,5 kg/roll). (75 m2) It is ideal for application in ventilated roofs with sheathing. Roofing membrane for ventilated roofs DELTA-VENT S Waterproofing polypropylene roof membrane which is placed Roll 0716/4 underneath the tile-bearing laths. Provides complete 1,5 m x 50 m 25 waterproofing, possesses exceptional vapour-permeability and 2 great mechanical strength and it is easily laid due to its light (75 m ) weight (approx. 10,5 kg/roll). It is ideal for application in non-ventilated roofs with or without sheathing. Roofing membrane for non-ventilated roofs DELTA-VENT N Waterproofing polypropylene roof membrane which is placed Roll 0716/4 underneath the tile-bearing laths. Provides complete 1,5 m x 50 m 32 waterproofing, possesses exceptional vapour-permeability and 2 great mechanical strength and it can be easily laid due to its light (75 m ) weight (approx. 9 kg/roll). It is ideal for application in non-ventilated roofs without sheathing. Roofing membrane for non-ventilated roofs DRAGOFOL Roofing membrane placed underneath the tile-bearing laths. Roll 0717/4 Provides complete waterproofing, allows breathing of the roof, 1,5 m x 50 m 40 possesses great mechanical strength and it is easily applied 2 due to its light weight (approx. 10,5 kg/roll). (75 m ) It is ideal for application in ventilated roofs without sheathing. White roofing membrane for ventilated roofs16
    • Roofing Membranes PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/E.-PAL.DELTA-FOL LP Roofing membrane placed underneath the tile-bearing laths. Roll0710/4 Provides complete waterproofing, allows breathing of the roof, 1,5 m x 50 m 50 possesses great mechanical strength and it is easily applied 2 due to its light weight (approx. 7,5 kg/roll). (75 m ) It is ideal for application in ventilated roofs without sheathing.Transparent roofingmembrane for ventilatedroofsROOF-TOP Bituminous roofing membrane placed underneath the tile- Roll0704/4 bearing laths. Provides complete waterproofing and possesses 1 m x 30 m great mechanical strength. Bears polyester reinforcement and double cover of perforated polyethylene film. (30 m2) ROOF-TOP 800 30 Roll weight: approx. 24 kg. ROOF-TOP 600 36 Roll weight: approx. 18 kg.Bituminous roofingmembrane PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/BOXISOMAT BUTYL TAPE ALU Self-adhesive butyl tape coated with aluminum. Mainly used Roll0719/4 for waterproofing and sealing on roofs and terraces, in places 10 cm x 10 m 60 such as chimney-roof assemblies, roof vents etc. Suitable for repairs on roof tiles, sealing joints on the top of the roof etc. Thickness: 0,6 mmSelf adhesive butyl tapewith aluminum coating1.7 Drainage Membranes PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/E.-PAL.DELTA-NB Drainage membrane made of high density polyethylen Roll0918/5 0,5 mm thick, with dimples 8,0 mm high. 2 m x 20 m 15 (40 m2) 17
    • Waterproofing MaterialsDrainage Membranes PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/E.-PAL. DELTA-MS Drainage membrane made of high density polyethylen Roll 0919/5 0,6 mm thick, with dimples 8,0 mm high. 2 m x 20 m 11 (40 m2) DELTA-NP-DRAIN Drainage membrane made of high density polyethylene Roll 0910/5 0,6 mm thick, with dimples 8,0 mm high and polypropylene 2 m x 20 m 5 geotextile bonded to one side. (40 m2) DELTA-FLORAXX Drainage membrane of high density polyethylene with octagonal Roll 0913/5 shape dimples of 20 mm height. Suitable for garden roofs. 2 m x 20 m 6 (40 m2) Drainage membrane DELTA-FLORAXX TOP Drainage membrane of high density polyethylene with octagonal Roll 0913/5 shape dimples of 20 mm height and attached polypropylene 2 m x 10 m 12 geotextile. Suitable for garden roofs. (20 m2) Drainage membrane DELTA Special termination bars used to cover the top edge of DELTA 20 ps./box drainage membranes in vertical applications. TERMINATION BARS Bar length: 2 m. 0905/518
    • Drainage Membranes PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/E.-PAL.DELTA SCREWS Used for the montage of DELTA drainage membranes as plugs 100 ps./box0907/5 or, in inverse, as bradawls bonded with their self-adhesive head to the substrate.DELTA WASHERS They are applied to the dimples of DELTA drainage membranes 100 ps./bag0908/5 in points where the membrane is screwed, allowing secure installation without tearing. 19
    • Waterproofing Materials20
    • 2. Concrete & Mortar Additives 2.1 Concrete Additives 2.2 Mortar Additives 2.3 Auxiliary Concreting Agents 21
    • 2. Concrete & Mortar Additives2.1 Concrete Additives PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/BOX PS/E.-PAL. PLASTIPROOF Plasticizer-waterproofing admixture (ASTM C-494, type A, *1000 kg 0120/1 ELOT EN 934-2:T2 & T9). Used for formulating concrete with 240 kg 2 low water permeability and improved physical properties. 20 kg 39 Color: Dark brown. 5 kg 4 72 Consumption: 0,2-0,5 kg per 100 kg of cement. Plasticizer, type A - Concrete waterproofing admixture BEVETOL-RD Concrete setting retarder - concrete superplasticizer *1000 kg 0129/1 (ASTM C-494: Type A, D and G, ELOT EN 934-2:T11.1 & 250 kg 2 T11.2). When added to the ready-mixed concrete improves 20 kg 39 its workability and increases its setting time. Suitable for formulating high strength concrete, exposed concrete, pumpable concrete etc. Color: Dark brown. Concrete setting retarder Consumption: and concrete 0,2-0,8 kg per 100 kg of cement. superplasticizer, type G BEVETOL-SPL Concrete superplasticizer (ASTM C-494, type A, D & G, ELOT *1000 kg 0111/1 EN 934-2:T11.1 and T11.2). When added to ready-mixed 250 kg 2 concrete, increases workability without decreasing strength. 20 kg 39 When added during concrete preparation, reduces the amount of water required (reduction of w/c ratio) thus increasing 5 kg 4 72 strength. Color: Dark brown. Concrete superplasticizer, Consumption: type G As superplasticizer (Type G): 0,6-0,8 kg per 100 kg of cement. At smaller dosages acts as plasticizer. REOTOL-SPL Concrete superplasticizer (ASTM C-494, type A & F, ELOT EN *1000 kg 0121/1 934-2:T3.1 and T3.2). When added to ready-mixed concrete, 240 kg 2 increases workability without decreasing strength. When added 20 kg 39 during concrete preparation, reduces the amount of water required (reduction of w/c ratio) thus increasing strength. Color: Dark brown. Concrete superplasticizer, Consumption: type F As superplasticizer (Type F): 0,2-1,4 kg per 100 kg of cement. At smaller dosages acts as plasticizer. ADIUM 110 Liquid polycarboxylic-based admixture acting as concrete *1000 kg 0128/1 superplasticizer according to ELOT EN 934-2:T3.1 and T3.2. *220 kg 2 When added during preparation of concrete, reduces water 20 kg 39 demand up to 20%. When added to the ready-mixed concrete improves significantly its workability (fluid concrete), without need of additional water. Color: Light brown. Broad-use new generation concrete superplasticizer Consumption: 0,60-1,40 kg per 100 kg of cement.22
    • Concrete Additives PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/BOX PS/E.-PAL.ADIUM 130 Liquid polycarboxylic-based admixture acting as as concrete *1000 kg0128/1 superplasticizer according to ELOT EN 934-2:T11.1 and T11.2. *220 kg 2 When added during preparation of concrete, reduces water 20 kg 39 demand up to 20%. When added to the ready-mixed concrete improves significantly its workability (self-compacting concrete) without need of additional water. Ideal for long-distance delivery of ready-mixed concrete when long slump retentionNew generation and workability is required. Color: Dark brown.superplasticizer for long- Consumption:distance delivery of 0,35-0,70 kg per 100 kg of cement.concreteADIUM 132 Liquid polycarboxylic-based admixture acting as as concrete *1000 kg0128/1 superplasticizer according to ELOT EN 934-2:T11.1 and T11.2. *220 kg 2 NEW When added during preparation of concrete, reduces water 20 kg 39 demand up to 20%. When added to the ready-mixed concrete improves significantly its workability (self-compacting concrete) without need of additional water. Ideal for long-distance delivery of ready-mixed concrete when long slump retentionNew generation and workability is required. Color: Brown.superplastisizer for Consumption:concrete with extended 0,35-0,80 kg per 100 kg of cement.slump retention.ADIUM 145 Liquid polycarboxylic-based admixture acting as concrete *1000 kg0128/1 superplasticizer according to ELOT EN 934-2:T3.1 and T3.2. *220 kg 2 NEW When added during preparation of concrete, reduces water 20 kg 39 demand up to 30%. When added to the ready-mixed concrete improves significantly its workability (self-compacting concrete), without need of additional water. Ideal for precast concrete elements.New generation Color: Brown.superplastisizer forprecast concrete Consumption: 0,30-0,70 kg per 100 kg of cement.elements.ADIUM 150 Liquid polycarboxylic-based admixture acting as concrete *1000 kg0128/1 superplasticizer according to ELOT EN 934-2:T3.1 and T3.2. *220 kg 2 When added during preparation of concrete, reduces water 20 kg 39 demand up to 30%. When added to the ready-mixed concrete improves significantly its workability (self-compacting concrete), without need of additional water. Ideal for precast concrete elements.New generation Color: Dark brown.superplasticizer forprecast concrete Consumption: 0,20-0,50 kg per 100 kg of cement.elementsBEVETOL-VZ Concrete setting retarder (ASTM C-494, type B, ELOT EN *250 kg 20112/1 934-2:T8). Increases setting time of concrete (delays setting) 20 kg 39 and improves its workability and its physical properties. Enables delivery of ready-mixed concrete to longer distances. Color: Dark brown. Consumption:Concrete 0,2-0,4 kg per 100 kg of cement.setting retarder 23
    • 2. Concrete & Mortar AdditivesConcrete Additives PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/BOX PS/E.-PAL. RETADOL Concrete setting retarder with plasticizing properties (ASTM C- *1000 kg 0122/1 494 type D, ELOT EN 934-2:T10). Increases setting time of *250 kg 2 concrete (delays setting) and improves its workability and its 20 kg 39 physical properties. Enables delivery of ready-mixed concrete to longer distances. Color: Dark brown. Consumption: Concrete setting retarder - 0,2-0,3 kg per 100 kg of cement. Plasticizer ADINOL-RAPID Broad-use concrete setting accelerator-antifreezing agent 1400 kg 0124/1 (ELOT EN 934-2:T6). Reduces setting time of concrete 320 kg 2 (accelerates setting) in cases where fast work is required and 20 kg 39 allows safe concreting in low temperatures. Color: Dark yellow. 5 kg 4 72 Consumption: Broad-use concrete 1,0-2,0 kg per 100 kg of cement depending on the desired setting accelerator - setting time. Antifreezing agent ADINOL-RAPID 2H Hardening accelerator for concrete (ELOT EN 934-2:T7). 1400 kg 0124/1 It accelerates the process of growth of initial strength of 290 kg 2 concrete without affecting negatively the final strength. It 20 kg 39 contributes to the fast abstraction of formwork facilitating thus 5 kg 4 72 the fast casting. Color: Dark yellow. Hardening accelerator Consumption: for concrete 1,0-2,0 kg per 100 kg of cement, depending on the desired result. AQUAMAT ADMIX Concrete waterproofing admixture in powder form that is added 20 kg 54 0317/1 during concrete preparation forming insoluble crystalline NEW compounds. Improves resistance to water permeability and does not affect vapor permeability of concrete. It remains permanently active and receives equally well positive and negative hydrostatic pressure. Suitable for waterproofing foundations, basements, tanks, wastewater treatment, swimming pools etc. Color: Grey. Concrete waterproofing admixture with Consumption: 0,8-1,2 kg per 100 kg of cement. crystallizing effect* Packages marked with an asterisk are available 3 days after reception of order.24
    • 2.2 Mortar Additives PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/BOX PS/E.-PAL. DOMOLIT Mortar plasticizer and setting retarder. Replaces lime. 220 kg 2 0103/1 Color: Dark brown. 20 kg 39 5 kg 4 72 Consumption: For masonry and paving mortars: 50 g per 25 kg of cement. 1 kg 12 324 For plastering mortars: 75 g per 25 kg of cement. Mortar plasticizer - Lime replacement DOMOLIT-TR Colorless mortar plasticizer and setting retarder. Replaces lime. *220 kg 2 0103/1 20 kg 39 Consumption: 5 kg 4 72 For masonry and paving mortars: 50 g per 25 kg of cement. Plastering mortars: 75 g per 25 kg of cement. 1 kg 12 324 Transparent mortar plasticizer - Lime replacement ASOLIT-POWDER Mortar plasticizer in powder form. Replaces lime. 30 kg 45 0125/1 Color: Beige. Consumption: 2,0-5,0 kg per mixer batch of half a bag (25 kg) of cement. Mortar plasticizer in powder form - Lime replacement ADINOL-DM Waterproofing admixture for mortars and non reinforced 220 kg 2 0110/1 concrete with plasticizing properties. It is used for water- 20 kg 39 impermeable cement mortars, non-reinforced concrete, 5 kg 4 72 plasters etc. 1 kg 12 324 Color: Dark yellow. Consumption: Waterproofing admixture Cement mortars: 1 kg per 100 kg of cement. for mortars and non Plastering mortars: 1 kg per 100 kg of cement+lime. reinforced concrete Concrete: 0,8 kg per 100 kg of cement. ADIFLEX-B Polymer dispersion - Elastifying agent for waterproofing slurries 150 kg 3 0113/1 (when added to AQUAMAT or cement mortars) or cementitious 20 kg 39 tile adhesives (when added to Isomat AK 20, Isomat AK 10 10 kg 36 etc.). Replaces all or part of the mixing water. Necessary for 5 kg 4 72 applications on dimensionally unstable substrates, subject to vibration or contraction-expansion. 1 kg 12 324 Color: White. Consumption: Elastifying agent 5-10 kg per 25 kg bag of AQUAMAT, Isomat AK 20, Isomat AK 10 etc., depending on the desired elasticity. 25* Packages marked with an asterisk are available 3 days after reception of order.
    • Concrete & Mortar AdditivesMortar Additives PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/BOX PS/E.-PAL. ADIPLAST Polymer latex (SBR). Improves the properties of mortars in 150 kg 3 0114/1 several ways offering, e.g. increased bonding to substrate and 20 kg 39 flexibility, shrinkage reduction, higher resistance to chemical 5 kg 4 72 effects and abrasion, enhanced water impermeability etc. 1 kg 12 324 Ideal for creating the bonding layer between old and new concrete or mortar. Color: White. Consumption: Polymer latex for multiple Added to the mixing water in proportion of ADIPLAST : water improvements of mortars = 1:1 to 1:5. LATEX Polymer latex. When added into the building mortars and 150 kg 3 0127/1 coatings, it increases bonding to the substrate, provides water 20 kg 39 impermeability and elasticity. It is suitable for creating bonding 5 kg 4 72 layers, repairing mortars, floor screeds resistant to abrasion, 1 kg 12 324 waterproof cement mortars, mortars resistant to chemicals, plasters with high strength and water impermeability etc. Color: White. Latex admixture - Consumption: Bonding Agent Added to the mixing water in proportion of LATEX: water = 1:1 to 1:5. DS-99 Additive for tile adhesives and joint grouts. Improves properties 20 kg 39 0116/1 such as bonding to substrate, abrasion resistance, water- 5 kg 4 72 impermeability. 1 kg 12 324 Color: White. Consumption: Added to the mixing water in proportion of DS-99 : water = 1:1 to 1:2. Additive for tile adhesives & joint grouts2.3 Auxiliary Concreting Agents PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/BOX PS/E.-PAL. SPLIT-2000 Deshuttering coating for all types of wooden or steel-faced *140 lit 0211/1 formwork. 20 lit 39 Color: Dark yellow. Consumption: Approx. 60 ml/m2. Formwork deshuttering agent26
    • Auxiliary Concreting Agents PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/BOX PS/E.-PAL. ISOCURE Paraffin-based, water emulsion for protecting fresh concrete 220 kg 2 0223/1 from quick evaporation of mixing water. It ensures the full 20 kg 39 hydration of cement, thus it reduces any drying shrinkage cracks. It is usually applied on large surfaces of exposed concrete such as industrial floorings, parking areas, concrete slabs etc. In case of subsequent layers on the concrete surface, ISOCURE must be removed by water blasting. Concrete curing agent Color: Light yellow. Consumption: 0,15-0,20 kg/m2, depending on application conditions. ISOCURE-A Water-based, acrylic emulsion for protecting fresh concrete 220 kg 2 0223/1 from quick evaporation of mixing water. It ensures the full 20 kg 39 hydration of cement, thus it reduces any drying shrinkage cracks. It is usually applied on large surfaces of exposed concrete such as industrial floorings, parking areas, concrete slabs etc. It is also suitable for vertical surfaces. There is no need of removing ISOCURE- A in case of subsequent layers on Acrylic based concrete the concrete surface. Color: White (transparent after drying). curing agent Consumption: 0,15-0,20 kg/m2, depending on application conditions. POLYPROPYLENE Polypropylene fibers 12 mm long, for reinforcing of concrete Paper bag and mortars. FIBERS 900gr 14 784 1327/6 Consumption: · 600-900 g/m of concrete. 3 Plastic bag · 900-1200 g/m of mortar. 3 600gr 20 1.120* Packages marked with an asterisk are available 3 days after reception of order. 27
    • Concrete & Mortar Additives28
    • 3. Tile Adhesives & Grouts 3.1 Tile Adhesives 3.2 Tile Grouts 3.3 Adhesives for Special Applications 3.4 Complementary Products 29
    • 3. Tile Adhesives & Grouts3.1 Tile Adhesives PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/BOX PS/E.-PAL. ISOMAT AK 9 Cement-based tile adhesive. Suitable for fixing ceramic tiles on Grey 0553/3 walls or floors on surfaces made of concrete, brickwork, plaster 25 kg 54 etc. For indoor and outdoor applications. It is classified as type C1 adhesive according to EN 12004. White Color: Grey, white. 25 kg 54 Consumption: 1,5-4,0 kg/m2. Cement-based tile adhesive C1 ISOMAT AK 10 Cement-based tile adhesive, with no vertical slip. Suitable for Grey 0501/3 fixing ceramic tiles on walls or floors on surfaces made of 25 kg 54 concrete, brickwork, plaster etc. For indoor and outdoor 5 kg 4 160 applications. It is classified as type C1 T adhesive according to EN 12004. Color: Grey, white. White 25 kg 54 Consumption: 5 kg 4 160 Cement-based tile 1,5-4,0 kg/m2. adhesive, with no vertical slip C1 T ISOMAT AK 11 High performance, polymer-modified tile adhesive with Grey 0550/3 extended open time. Suitable for fixing ceramic and porcelain 25 kg 54 tiles on all common substrates, such as concrete, screeds, brickwork, plaster etc. For indoor and outdoor applications, on White walls and floors. It is classified as type C2 E adhesive according to EN 12004. 25 kg 54 Color: Grey, white. High performance, Consumption: polymer-modified tile 1,5-4,0 kg/m2. adhesive C2 E ISOMAT AK 12 High performance, polymer-modified adhesive for ceramic and Grey 0552/3 porcelain tiles on critical substrates. It is characterized by 25 kg 54 extended open time and no vertical slip. Also suitable for fixing tiles on common substrates such as concrete, screeds, White brickwork, plaster. For indoor and outdoor applications, on walls and floors. It offers high initial and final adhesive strength and 25 kg 54 resistance to moisture. It is classified as type C2 TE adhesive according to EN 12004. High performance, Color: Grey, white. polymer-modified tile Consumption: 1,5-4,0 kg/m2. adhesive C2 TE ISOMAT AK 20 High performance, flexible, polymer-modified adhesive for Grey 0558/3 ceramic and porcelain tiles on critical substrates. It is 25 kg 54 characterized by extended open time, no vertical slip and flex flexibility. Also suitable for fixing natural stone and decorative 5 kg 4 160 bricks, on concrete, screeds etc. Recommended for substrates like old tile layers, floors with in-floor heating, swimming pools White etc. For indoor and outdoor applications, on walls and floors. It is 25 kg 54 classified as type C2 TE S1 adhesive according to EN 12004 and 15 kg 90 High performance, EN 12002. Color: Grey, white. 5 kg 4 160 flexible, polymer-modified Consumption: 1,5-4,0 kg/m2. tile adhesive C2 TE S130
    • Tile Adhesives PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/BOX PS/E.-PAL.ISOMAT AK 22 High performance, flexible, polymer-modified adhesive for all Grey0549/3 type of tiles on deformable substrates. It is characterized by 25 kg 54 extended open time, no vertical slip and high flexibility. Also 5 kg 4 160 suitable for fixing tiles on concrete, screeds, gypsum board, olde xtra tile layers, floors with in-floor heating, swimming pools, metallic flex surfaces etc. It is ideal for applications on deformable and White flexible substrates. For indoor and outdoor applications, on walls 25 kg 54 and floors. It is classified as type C2 TE S1 adhesive according 15 kg 90High performance, to EN 12004 and EN 12002. Color: Grey, white. 5 kg 4 160flexible, polymer-modified Consumption: 1,5-4,0 kg/m2.tile adhesive C2 TE S1ISOMAT AK 25 High performance, elastic, polymer-modified adhesive for all type 25 kg 540582/3 of tiles on deformable and vibrative substrates. It is 5 kg 4 160 characterized by extended open time, no vertical slip and elasticity. Also suitable for fixing tiles on concrete, screeds, extra plaster, old tile layers, floors with in-floor heating, swimming flex pools, metallic surfaces, etc. For indoor and outdoor applications, on walls and floors. It is classified as type C2 TE S2 adhesive according to EN 12004 and EN 12002.High performance, Color: White.elastic, polymer-modified Consumption: 1,5-4,0 kg/m2tile adhesive C2 TE S2ISOMAT AK-ECOLIGHT Light-weight, elastic adhesive, for ceramic and porcelain tiles, on 15 kg 540572/3 deformable substrates. It is characterized by extended open time, no vertical slip and high elasticity. Also suitable for fixing natural stone and decorative bricks, on concrete, screeds, extra plaster etc. Ideal wherever elasticity and adhesion strength are flex required like old tile layers, gypsum boards etc. For indoor and outdoor applications, on walls and floors. It is classified as type C2 TE S2 adhesive according to EN 12004 and EN 12002. Light-weight, elastic tile Color: Grey. adhesive C2 TE S2 Consumption: 1,0- 3,0 kg/m2.ISOMAT AK-LIGHT Light-weight, flexible adhesive, for all type of tiles on 18 kg 540572/3 deformable substrates. It is characterized by extended open time, no vertical slip and high flexibility. Also suitable for fixing all type of tiles on concrete, screeds, plaster, old tile layers, extra floors with in-floor heating, swimming pools, metallic surfaces flex etc. For indoor and outdoor applications, on walls and floors. It is classified as type C2 TE S1 adhesive according to EN 12004 and EN 12002. Light-weight, flexible tile Color: White adhesive C2 TE S1 Consumption: 1,0-3,0 kg/m2ISOMAT AK-MEGARAPID Two-component, fast-setting, flexible tile adhesive. It is 33 kg 54(A)0557/3 characterized by extended open time and flexibility. Suitable for (A+B) 54(B) fixing ceramic and porcelain tiles, on concrete, screeds, plaster, mosaic, gypsum boards, terraces, floors with in-floor heating, swimming pools etc. Ideal for areas that must be ready for use within short time. For indoor and outdoor applications, on walls and floors. It is classified as type C2 FE S2 adhesive according to EN 12004 and EN 12002. Package: 33 kg (25 kg A+8 kg B).Two-component, fast- Color: White.setting, flexible tile Consumption: 1,5-4,0 kg/m2adhesive C2 FE S2 31
    • Tile Adhesives & GroutsTile Adhesives PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/BOX PS/E.-PAL. ISOMAT AK-ELASTIC High performance, two-component elastic tile adhesive. It is 35 kg 54(A) 0562/3 characterized by extended open time and exceptional elasticity. (A+B) 54(B) Suitable for fixing ceramic and mosaic tiles wherever elasticity and adhesion strength are required like old tile layers, terraces, swimming pools, floors with in-floor heating etc. For indoor and 7 kg 48 outdoor applications, on walls and floors. It is classified as type (A+B) (A+B) C2 E S2 adhesive according to EN 12004 and EN 12002. Packages: 35 kg (25 kg A+10 kg B) & 7 kg (5 kg A+2 kg B). High performance, Color: White. two-component elastic Consumption: 1,5-4,0 kg/m2. tile adhesive C2 E S2 ISOMAT AK-RAPID Fast-setting, polymer modified cement-based tile adhesive. Grey 0557/3 Suitable for fixing absorptive or non-absorptive tiles on walls or 25 kg 54 floors on surfaces made of concrete, brickwork, plaster etc. Ideal in cases where the surfaces have to be delivered fast for White use, e.g. work areas etc. It is qualified as non-slip (zero slipping of the tile). For indoor and outdoor applications. It is 25 kg 54 classified as type C2 FT adhesive according to EN 12004. 5 kg 4 160 Color: Grey, white. Fast-setting polymer modified tile adhesive Consumption: 1,5-4,0 kg/m2. C2 FT ISOMAT AK-STONE Cement-based tile adhesive for thick layers (up to 15 mm). Grey 0556/3 Suitable for fixing tiles or natural stone on walls or floors on 25 kg 54 surfaces made of concrete, brickwork, plaster etc. Possesses increased open time for application. For indoor and outdoor applications. It is classified as type C1 E adhesive according to White EN 12004. 25 kg 54 Color: Grey, white. Coarse-grained tile and Consumption: natural stone adhesive 2,0-8,0 kg/m2. C1 E ISOMAT AK-GRAND Coarse-grained, polymer modified, cement-based tile adhesive Grey 0543/3 for thick layers (up to 15 mm). Suitable for fixing and pointing 25 kg 54 decorative overlays (artificial stone, slate, decorative bricks etc.) on walls or floors on various surfaces and especially White where high adhesion and moisture resistance are required. Possesses increased open time for application. For indoor and 25 kg 54 outdoor applications. It is classified as type C2 E adhesive according to EN 12004. Color: Grey, white, beige. Beige Polymer modified tile 25 kg 54 adhesive for decorative Consumption: Fixing: 2,0-8,0 kg/m2. Pointing: 1,0-4,0 kg/m2. overlays C2 E ISOMAT AK-MARBLE Fast-setting, polymer modified, cement-based marble and 25 kg 54 0555/3 granite adhesive. Suitable for fixing marble or granite on walls or floors on various surfaces and especially where high adhesion and moisture resistance are required. Prevents staining of sensitive overlays, such as marble layers, due to fast retention of water. Possesses increased open time for application. For indoor and outdoor applications. It is classified as type C2 E adhesive according to EN 12004. Polymer modified marble Color: White. and granite adhesive C2 E Consumption: 1,5-6,0 kg/m2.32
    • Tile Adhesives PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/BOX PS/E.-PAL.ISOMAT AK-FLUX Polymer-modified, cement- based tile adhesive with increased 25 kg 540563/3 open time. After mixing with water, it attains fluid consistency. Suitable for thick layers (up to 20mm). Fields of application: Fixing absorptive and non-absorptive floor tiles on various surfaces. Ideal for fixing large tiles by the full-bed laying method and wherever the leveling and fixing of tiles on irregular substrate is required. For indoor and outdoor applications. It is classified as type C2 E according to EN 12004. Color: Grey.Polymer-modified, Consumption:full-bed leveling tile 2,0-8,0 kg/m2adhesive C2 EISOMAT AK-PRIMER Highly penetrative, polymer emulsion used as adhesion primer 20 kg 390574/3 on smooth, absorbent or non-absorbent substrates, before the 5 kg 4 72 application of cement based tile adhesives. 1 kg 12 324 Color: Light purple. Consumption: 100-200 g/m2, depending on the absorptivity of the substrate.Adhesion primer for tileadhesivesUNI-PRIMER Ready-to-use acrylic water-based primer. Stabilizes weak, 20 kg 390209/1 loose or crumbling plasters. 5 kg 4 72 Color: White. 1 kg 12 324 Consumption: 100-200 g/m2.Acrylic water-basedprimerMULTIFLEX Ready-to-use, pasty tile adhesive based on acrylic resins. It 25 kg 240517/3 provides high initial and final adhesive strength, high elasticity 5 kg 110 and moisture resistance. Ideal for minor repairs due to its fast 1 kg 22 264 and easy application. Fields of application: Suitable for fixing tiles on surfaces such as concrete, plaster, gypsum-plaster, gypsum- board, cement-board, wood etc. Also appropriate for areas with high humidity such as bathrooms, kitchens, etc. It is used indoor on walls and floors and outdoor on walls. It is classified as typeHigh performance, D2T adhesive according to EN 12004. Color: White.ready-to-use, pasty tile Consumption: 1-3 kg/m2.adhesiveISOMAT AK 50 Two-component solvent-free epoxy adhesive. It is suitable for 10 kg 440575/3 fixing every type of tiles to several substrates, on walls or (A+B) floorings. It has high adhesion strength and high chemical resistance. It can also be used for pointing tile joints. 5 kg 110 It is classified as type R2T according to EN 12004. (A+B) Color: Light grey. Consumption:Two-component epoxy Approximately 1,75 kg/m2/mm.tile adhesive 33
    • Tile Adhesives & Grouts3.2 Tile Grouts PRODUCT/CODE DESCRIPTION - APPLICATION COLOR PACKAG. PS/E.-PAL. MULTIFILL Cement-based colored grout for pointing tile 01 White 5 kg 160 0511/3 joints on walls or floors, for indoor and 02 Black 4 bags/ outdoor applications. 03 Grey box It is classified as type CG2 WA tile grout 04 Pearl grey according to EN 13888. 05 Light Grey It is available in 2 types: 06 Bahama Beige 07 Redbrown · MULTIFILL 2-5, suitable for joint width 08 Brown from 2 mm to 5 mm. 09 Light Brown · MULTIFILL 3-15, suitable for joint width 10 Dark Grey from 3 mm to 15 mm. 11 Ivory 0503/3 12 Purple Consumption: 13 Red 0,2-2,0 kg/m2, depending on tile and joint dimensions. 14 Cotto 15 Manhattan Grey 16 Light Ochre 17 Anemone 18 Pearl beige Colored tile grout classified as type 19 Mocha CG2 WA 20 Maroon 21 Caramel 22 Magnolia 23 Oregon 24 Cinnamon 25 Crocus 26 Green 27 Orange 30 Cement Grey 31 Ceramic 32 Mykonos Blue 33 Yellow 34 Mint 35 Tropical Sea 36 Cypress 01 White 2 kg 300 02 Black 10 bags/ 03 Grey box 04 Pearl grey 05 Light Grey 06 Bahama Beige 07 Redbrown 08 Brown 09 Light Brown 10 Dark Grey 11 Ivory 12 Purple 13 Red 14 Cotto34
    • Tile Grouts PRODUCT/CODE DESCRIPTION - APPLICATION COLOR PACKAG. PS/E.-PAL.MULTIFILL 15 Manhattan Grey 16 Light Ochre 17 Anemone 18 Pearl beige 19 Mocha 20 Maroon 21 Caramel 22 Magnolia 23 Oregon 24 Cinnamon 25 Crocus 26 Green 27 Orange 30 Cement Grey 31 Ceramic 32 Mykonos Blue 33 Yellow 34 Mint 35 Tropical Sea 36 Cypress 01 White 25 kg 54 03 Grey 05 Light Grey 06 Bahama Beige 10 Dark Grey MULTIFILL 2-5 is available in all 34 colors. 21 Caramel MULTIFILL 3-15 is available only in colors marked with an asterisk (*). 30 Cement GreyMULTIFILL Fast-setting, polymer-modified cement-based 01 White 4 kg 160RAPID 1-8 tile grout. It offers high mechanical strength, 03 Grey 4 bags/0520/3 excellent color stability and high water- 05 Light Grey box repellence. It gives smooth and glossy final 06 Bahama Beige surface. Suitable for joint width up to 8 mm. It is classified as type CG2 WA tile grout 10 Dark Grey according to EN 13888. Used for grouting any 15 Manhattan Grey kind of tiles on walls or floors, indoor or 17 Anemone outdoor. 30 Cement GreyFast-setting, cementbased tile grout 2 Consumption: 0,2-2,0 kg/m , depending onenriched with resins the size of the tiles and the width of the joint. 35
    • Tile Adhesives & GroutsTile Grouts PRODUCT/CODE DESCRIPTION - APPLICATION COLOR PACKAG. PS/E.-PAL. MULTIFILL MULTIFILL SMALTO 1-8 is a colored, polymer- 01 White 4 kg 160 SMALTO 1-8 modified, cement-based tile grout. It offers 02 Black 4 bags/ 0511/3 high mechanical strength, superb color 03 Grey box stability and great water-repellence. Contains 04 Pearl grey special bacteriostatic agents, which block the 05 Light Grey formation of bacteria on the grout. It gives a smooth and glossy final surface. Suitable for 06 Bahama Beige joint width from 1 mm to 8 mm. 07 Redbrown It is classified as type CG2 WA tile grout 08 Brown according to EN 13888. 09 Light Brown Tile grout with porcelain 10 Dark Grey effect, water-repellent Consumption: 11 Ivory CG2 WA 0,2-2,0 kg/m2, depending on the tile 12 Purple dimensions and the joint width. 13 Red 14 Cotto 15 Manhattan Grey 16 Light Ochre 17 Anemone 18 Pearl beige 19 Mocha 20 Maroon 21 Caramel 22 Magnolia 23 Oregon 24 Cinnamon 25 Crocus 26 Green 27 Orange 30 Cement Grey 31 Ceramic 32 Mykonos Blue 33 Yellow 34 Mint 35 Tropical Sea 36 Cypress 01 White *2 kg 110 02 Black 03 Grey 04 Pearl grey 05 Light Grey 06 Bahama Beige 07 Redbrown 08 Brown 09 Light Brown 10 Dark Grey 11 Ivory 12 Purple 13 Red 14 Cotto36
    • Tile Grouts PRODUCT/CODE DESCRIPTION - APPLICATION COLOR PACKAG. PS/E.-PAL.MULTIFILL 15 Manhattan GreySMALTO 1-8 16 Light Ochre0511/3 17 Anemone 18 Pearl beige 19 Mocha 20 Maroon 21 Caramel 22 Magnolia 23 Oregon 24 Cinnamon 25 Crocus 26 Green 27 Orange 30 Cement Grey 31 Ceramic 32 Mykonos Blue 33 Yellow 34 Mint 35 Tropical Sea 36 Cypress 01 White 20 kg 54 03 Grey 05 Light Grey *The grout of 2 kg is packed in a plastic container. 06 Bahama BeigeMULTIFILL Colored, fine-grained, polymer-modified, 01 White 4 kg 160 cement-based grout. It offers high mechanical 02 Black 4 bags/MARBLE 0-3 strength, superb color stability and great water-0555/3 NEW 05 Light Grey box repellence. Suitable for joint width up to 3 mm. It is used for grouting marbles, granites, tiles, 06 Bahama Beige glass and marble mosaic, on walls or floors, 17 Anemone indoor or outdoor. It is classified as type CG2 WA grout according to EN 13888.Grout for marbles Consumption: 0,2-1,3 kg/m2, depending on the size of marbles and the joint width.MULTIFILL-STONE Colored polymer-modified cement mortar for 01 White 25 kg 540556/3 building and grouting of natural or artificial 03 Grey stone, on wall and floor. It provides high initial 06 Bahama Beige and final adhesive strength, high mechanical 10 Dark Grey properties and exceptional color stability. 16 Light Ochre Suitable for joint width 5-40mm. Due to the special particle size granulation of the product, the mortar does not withdraw under the weight of the masonry units. It is classified asColored cement mortar type M15 mortar for masonry according tofor the building and EN 998-2 and as type CG2 grout according togrouting of stones EN 13888. 37
    • Tile Adhesives & GroutsTile Grouts PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/BOX PS/E.-PAL. MULTIFILL-ELASTIC One-component, colored, elastic joint sealant. Used for Cartr. 0569/3 pointing tile joints on walls or floors, especially where high 280 ml 25 1.125 elasticity is required (expansion joints etc.). Suitable for indoor and outdoor applications. Color: White, light grey, grey, dark grey, anemone, bahama beige, caramel. Consumption: Colored elastic Joint 5 mm x 5 mm: 1 cartridge/11,2 m of joint length. tile joint sealant MULTIFILL-EPOXY Two-component solvent-free epoxy grout. It is applied where 10 kg 44 THIXO high mechanical and chemical resistance is required. It is (A+B) 0539/3 ideally combined with special tiles for industrial use. It is suitable for pointing wall and floor tile joints in industrial areas, 5 kg 110 pools etc. It has excellent workability and it is easily cleaned before hardening. It is classified as RG type grout according to (A+B) standard EN 13888. Colors: White, grey, light grey, black, bahama beige. Other 2 kg 140 Two-component colored epoxy grout colors by special order (minimum quantity 300 kg). (A+B) Consumption: 0,2-5,0 kg/m2. MULTIFILL-EPOXY Two-component solvent free epoxy grout for floors. It is applied 10 kg 44 FLOW where high mechanical and chemical resistance is required. It (A+B) 0538/3 can be ideally combined with special tiles for industrial use. Due to its fluidity, it is suitable for pointing floor tile joints in 5 kg 110 industrial areas, pools etc. It has excellent workability and is easily cleaned with water before hardening. It is classified as (A+B) RG type grout according to standard EN 13888. Two-component epoxy Color: Light grey. Other RAL colors by special order (minimum grout for floorings quantity 300 kg). Consumption: 0,2-5,0 kg/m2. MULTIFILL-EPOXY Two-component decorative, solvent-free epoxy grout. With the 2 kg 110 GLITTER addition of ISOMAT-GLITTER, a colored decorative grout with (A+B) 0540/3 particular aesthetic effect is created. It is applied where high mechanical and chemical resistance is required. Ideally combined with glass mosaic tiles and tiles with high chemical resistance. Suitable for pointing wall or floor tile joints in residences, clubs, shops, industrial sites etc. It is classified as Decorative RG type grout according to standard EN 13888. Color: 10 Two-component epoxy selected. 2 grout Consumption: 0,1-4,0 kg/m . ISOMAT GLITTER Colored metallic aggregates which when added to the epoxy 200 gr 20 0540/3 grout MULTIFILL-EPOXY GLITTER a colored, decorative grout with particular aesthetic effect is created. ISOMAT-GLITTER is added in a proportion of up to 10% by weight. 100 Silver, 110 Green, 120 Ôurquoise, 130 Violet, 140 Pink, 150 Red, 160 Red Brown, 170 Bronze, 180 Beige, 190 Gold38
    • 3.3 Adhesives for Special Applications PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/BOX PS/E.-PAL.ISOMAT AK-T33 Cement-based adhesive for thermal insulation boards. Suitable 25 kg 540335/3 for fixing thermal insulation polystyrene boards on cement- based substrates. Color: Grey Consumption: 3,0-4,0 kg/m².Adhesive for thermalinsulation boardsISOMAT AK-T35 Fiber-reinforced, polymer-modified, cement-based adhesive. It is Grey0335/3 used in combination with the plasters MARMOCRET PLUS and 25 kg 54 MARMOCRYL, as a system for the external thermal insulation of buildings. Suitable for fixing thermal insulation polystyrene boards on cement-based substrates. Moreover, when reinforced White with fiberglass mesh and applied on the exterior side of fixed 25 kg 54 thermal insulation boards, it constitutes an ideal substrate for the subsequent plaster layer. Color: Grey, white.Fiber-reinforced Consumption: As adhesive: 3-4 kg/m². As a reinforced mortar:adhesive for thermal approx. 1,5 kg/m²/mm.insulation boardsISOMAT AK-T55 Fiber-reinforced, polymer-modified cement-based adhesive. It is Grey0335/3 used in combination with the plasters MARMOCRET PLUS and 25 kg 54 MARMOCRYL, as a system for the external thermal insulation of buildings. Suitable for fixing thermal insulation polystyrene boards on cement-based substrates. Moreover, when reinforced White with fiberglass mesh and applied on the exterior side of fixed 25 kg 54 thermal insulation boards, it constitutes an ideal substrate for the subsequent layer of plaster. Color: Grey, white.Fiber-reinforced adhesive Consumption: As adhesive: 3-4 kg/m². As a reinforced mortar:for thermal insulation approx. 1,5 kg/m²/mm.boardsISOMAT AK-T65 Polymer-modified, cement-based adhesive. It is used in 25 kg 540335/3 combination with the plasters MARMOCRET PLUS and NEW MARMOCRYL SILICONE as a system for the external thermal insulation of buildings. Suitable for fixing mineral wool boards on cement-based substrates. Moreover, when reinforced with fiberglass mesh and applied on the exterior side of fixed mineral wool boards, it constitutes an ideal substrate for the subsequent layer of plaster. Color: Grey 2Adhesive for mineral wool Consumption: As adhesive: 5 kg/m .boards As a reinforced mortar: approx. 1,5 kg/m2/mmISOMAT AK-THERMO Fiber-reinforced, polymer-modified, cement-based non-slip 25 kg 540335/3 adhesive. Suitable for fixing thermal insulation polystyrene boards on cement-based substrates. Moreover, when reinforced with fiberglass mesh and applied on the exterior side of fixed thermal insulation boards, it constitutes an ideal substrate for the subsequent MARMOCRET PLUS or MARMOCRYL layer. Possesses increased open time. Color: White. Consumption:Fiber-reinforced As an adhesive: 2,0-4,0 kg/m2.adhesive for thermal As a reinforced mortar: 1,5 kg/m2/mm.insulation boards 39
    • Tile Adhesives & GroutsAdhesives for Special Applications PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/BOX PS/E.-PAL. ISOMAT AK-THERMO Ready-to-use, pasty coating, based on acrylic resins. It provides 25 kg 24 high elasticity and moisture resistance. Ideal for the external 0335/3 ACRYL thermal insulation of buildings when applied in combination with the organic plasters MARMOCRYL and MARMOCRYL-SILICONÅ. When reinforced with fiberglass mesh and applied on the exterior side of fixed thermal insulation boards, it constitutes an ideal substrate for the subsequent organic plaster. Moreover, it can be used as an adhesive for fixing thermal insulation boards on the Acrylic, fiber-reinforced facade of buildings. Color: White coating for thermal Consumption: As reinforced coat: approx. 3,0-4,0 kg/m². insulation boards As adhesive: 2,0-5,0 kg/m². ISOMAT AK-BLOCK High quality polymer modified cement-based adhesive. Used Grey 0544/3 for fixing aerated concrete elements. It possesses increased 25 kg 54 open time for application. Color: Grey, White. White Consumption: 25 kg 54 Approx. 13 kg for building 1 m3 of aerated concrete wall. Polymer modified adhesive for aerated concrete masonry ISOMAT AK-FIRE Refractory cement-mortar for firebricks. Suitable for laying 25 kg 54 0571/3 and grouting all kinds of firebricks in areas where high 5 kg 4 160 temperatures are developed (fireplaces, wood ovens, stoves, barbecues, chimneys etc.). It provides excellent resistance to high temperatures and extensive temperature changes, high initial and final adhesive strength and resistance to moisture. Color: Grey. Consumption: Refractory mortar for Indicatively, for firebricks with dimensions 20x10x3 cm and laying and grouting joint width 1 cm the consumption is about 5 kg/m2. firebricks ISOMAT AK-GLASS Polymer modified cement-based adhesive for glass-blocks. 25 kg 54 0324/3 Used for fixing and pointing glass-blocks. 5 kg 4 160 Color: White. Consumption: Approx. 13 kg for building 1 m2 of wall with ordinary glass blocks. Polymer modified adhesive for fixing and pointing glass-blocks ISOMAT MT 200 Pre-mixed, cement-based mortar for fixing marbles. It is used 25 kg 54 0577/3 only with the addition of water. It simplifies and accelerates the applications. Color: White. Consumption: Approx. 15 kg/m2/cm. Pre-mixed, cement-based mortar for marbles40
    • Adhesives for Special Applications PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/BOX PS/E.-PAL.ISOMAT AK-EPOXYÕÁËÏÐËÅÃÌÁ Two-component solvent-free epoxy adhesive. Suitable for fixing 20 lit 22NORMAL marbles, granites and most of the building materials to several (A+B) (A+B)0573/3 substrates, on walls or floors. After hardening it has great chemical resistance and high compressive strength. 4 lit 70 Easy to use due to the simple mixing proportion of the two components (A:B = 1:1 by volume) (A+B) (A+B) Color: Light yellow. 1 lit 18Two-component epoxy Consumption: (A+B) (A+B)marble and granite Depends on the dimensions and weight of the bonded material.adhesiveISOMAT AK-EPOXY Two-component solvent-free epoxy adhesive. Suitable for fixing 20 lit 22 marbles, granites and most of the building materials to several (A+B) (A+B)0573/3 substrates, on walls or floors. Suitable for fixing on vertical surfaces due to its fast setting (7 minutes). After hardening it 4 lit 70 has great chemical resistance and high compressive strength. Easy to use due to the simple mixing proportion of the two (A+B) (A+B) components (A:B = 1:1 by volume). Color: Grey-green. 1 lit 18Two-component, fast- Consumption: (A+B) (A+B)setting epoxy marble and Depends on the dimensions and weight of the bonded material.granite adhesiveMONTAGE-S High quality pasty adhesive in a solvent solution. It is based on Cartr.0630/3 caoutchouc and synthetic resins. It is used for fast and powerful 310 ml 25 1.200 bonding on almost all construction materials. No need for drilling, screwing or nailing. Not suitable for bonding mirrors, polystyrene insulation boards or other materials sensitive to solvents. Color: Beige. Consumption:Pasty adhesive for fast Typical consumption: 1 cartridge/12 linear meters.and powerful bondingMONTAGE-W High quality solvent free adhesive based on acrylic emulsion. It Cartr.0630/3 is used for fast and powerful bonding on all kinds of porous 310 ml 25 1.200 substrates, like wood, concrete, masonry, gypsum boards etc. No need for drilling, screwing or nailing. Suitable for bonding polystyrene insulation boards. Color: Aeige. Consumption:Solvent free pasty Typical consumption: 1 cartridge/12 linear meters.adhesive for fast andpowerful bondingISOMAT AK-PARQUET High performance, one-component polyurethane adhesive for 12 kg/can 360631/3 wooden floorings. Suitable for fixing and bonding all types of wooden floorings such as solid, lam parquet, strips, longstrips, planks, on cementious floors, wooden floors, ceramic tiles, marble, mosaic, metal surfaces, etc. Color: Beige. Consumption: 1,2-1,4 kg/m2.Polyurethane adhesivefor wood floorings 41
    • Tile Adhesives & GroutsAdhesives for Special Applications PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/BOX PS/E.-PAL. SUPERBOND-PU High performance one-component polyurethane adhesive, White 0631/3 without solvents. It provides powerful bonding on all 280 ml 25 1.500 construction materials such as wood, concrete, aluminium, tiles etc. It is also suitable for every wood construction and for wood furniture industry. Color: White. Consumption: Indicative consumption: 1 cartridge/12 linear meters. Polyurethane adhesive for powerful bonding3.4 Complementary Products PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/E.-PAL. UNCOUPLING Suitable for uncoupling of sound and problematics substrates. Roll MEMBRANE Allows subsequent coverings to function as independent layers 1 m x 30 m 28 0719/3 in relation with the substrate. Suitable for indoor walls or floors in a variety of substrates such as concrete, cement mortars, old layers of tiles, mosaics, masonry etc. WATERPROOFING Suitable for waterproofing and uncoupling of sound and Roll & UNCOUPLING problematics substrates. Especially used in damp areas and on 1 m x 15 m 28 terraces, balconies etc. It can be placed on walls or floors and MEMBRANE 0719/1 on a variety of substrates such as concrete, cement mortars, old tile layers, mosaics, masonry etc.42
    • 4. Repairing Materials & Paints 4.1 Strengthening & Repairing of Concrete 4.2 Construction & Repairing of Masonry Wall 4.3 Putties, Paints & Protective Materials 4.4 Cleaning Agents 4.5 Elastic Joint Sealants 4.6 Bituminous Repairing Materials 43
    • 4. Repairing Materials & Paints4.1 Strengthening & Repairing of Concrete4.1.1 CEMENT-BASED MATERIALS PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/BOX PS/E.-PAL. FERROSEAL Polymer-modified brushable cement mortar used for 25 kg 32 0331/1 protecting reinforcement elements from corrosion and for 15 kg 32 creating the bonding layer between old and new concrete or 5 kg 6 75 mortar. Color: Redbrown. 1 kg 15 240 Consumption: Cement-based As anticorrosive coating: 0,07-0,13 kg/m of reinforcement anticorrosive coating for element. reinforcement elements - As bonding agent: approx. 2,0 kg/m2. Bonding agent FERROSEAL-MCI Water-based emulsion with highly penetrating ability that acts 20 kg 39 0331/1 as a corrosion inhibitor of steel reinforcement. FERROSEAL-MCI 5 kg 4 72 penetrates the concrete and forms a protective layer on the 1 kg 12 324 surface of the reinforcing steel. Ideal for repairs of reinforced concrete. Also suitable as an anticorrosive protection for structures of reinforced concrete that are exposed on aggressive environment such as bridges, aquaducts etc. Color: Transparent. Impregnation- corrossion inhibitor Consumption: Approx. 0,5 kg/m2. DUROCRET Polymer-modified cement mortar, suitable for patching and Grey 0310/1 repairing concrete, masonry and plaster, formation of grooves 25 kg 54 or ridgepoles etc. 5 kg 4 160 It is classified as PCC R2 mortar according to EN 1504-3. Color: Grey, white, redbrown. White 25 kg 54 Consumption: 5 kg 4 160 Approx. 15,0 kg/m2/cm. Redbrown Groove formation: 1,9-2,7 kg/m. 25 kg 54 Polymer-modified cement mortar 5 kg 4 160 DUROCRET-FAST Fast-setting, polymer-modified cement mortar. It provides high 25 kg 54 0310/1 adhesion to the substrate, excellent workability and abrasion resistance. Suitable for repairing works on concrete, screeds, masonry etc. Workability time: 45 minutes. It is classified as PCC R2 mortar according to EN 1504-3. Color: Grey. Consumption: Fast-setting, repairing Approx. 17 kg/m2/cm of layer thickness. cement mortar For groove formation: 1.9-2.7 kg/m. DUROCRET-DECO Polymer-modified, fiber-reinforced, cement mortar. It provides 25 kg 54 0310/1 excellent adhesion to the substrate, waterproofing and abrasion White NEW resistance. For indoor and outdoor use in a variety of Grey applications, on floors and walls, wherever aesthetic Light Grey intervention is needed (e.g. Cycladic architecture) in homes, shops, hotels etc. Suitable for special structures such as built-in Light Ochre beds, built sanitary ware (sinks, bathtubs, showers etc.) Mocha Colors: white, grey, light grey, mocha, crocus, light ochre. Crocus Cement screed for surface finishing on Consumption: Approx. 1,5 kg/m2/mm. floors and walls44
    • Strengthening and Repairing of ConcreteCEMENT-BASED MATERIALS PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/BOX PS/E.-PAL. DUROCRET Repairing and waterproofing cement mortar. It is suitable for 25 kg 54 indoor and outdoor applications on concrete, brickwork, for PENETRATE0310/1 groove formation etc. Also it can be used for the waterproofing of concrete elements, in cases from simple moisture to water pressure. Suitable for waterproofing of basements, foundations, manholes, water tanks, sewage tanks etc. Color: Grey. Consumption: Repairing & waterproofing Approx. 17 kg/m2/cm of layer thickness. cement mortar with For groove formation: 1.9-2.7 kg/m. crystallizing effect RAPICRET Fast-setting cement mortar for patching and repairing concrete 25 kg 54 0316/1 elements, fixing, anchoring, cavity sealing, formation of 5 kg 4 160 grooves etc. and generally when considerable strength and fast work are needed. It is classified as CC R3 mortar according to EN 1504-3. Color: Grey. Consumption: Approx. 17,5 kg/m2/cm. Fast-setting patching mortar MEGACRET-10 High-strength, fibre-reinforced, thixotropic, cementitious 25 kg 54 0334/1 repairing mortar. Suitable for highly demanding repairs of concrete elements. It is applied in layers up to 10 mm thick (per layer), by trowel or gunite machine. It is classified as CC R3 mortar according to EN 1504-3. Color: Grey. Consumption: High-strength fibre- Approx. 17,5 kg/m2/cm. reinforced repairing mortar MEGACRET-40 High-strength, fibre-reinforced, cementitious repairing mortar. 25 kg 54 0322/1 Suitable for highly demanding repairs of concrete elements. It 5 kg 4 160 is applied in layers up to 40 mm thick (per layer), by trowel or gunite machine. It is classified as CC R4 mortar according to EN 1504-3. Color: Grey. Consumption: High-strength fibre- Approx. 17,5 kg/m2/cm. reinforced repairing mortar MEGACRET-40 FAST Fast setting, high strength, fibre-reinforced, cementitious 25 kg 54 0322/1 repairing mortar. Suitable for fast repairs on concrete elements. NEW It is applied in layers up to 40 mm thick (per layer), by trowel or gunite machine. It is classified as CC R4 mortar according to EN 1504-3. Color: Grey. Consumption:Fast-setting, Approx. 17,5 kg/m2/cm.fibre-reinforced,high-strength cementitiousrepairing mortar 45
    • Repairing Materials & PaintsStrengthening and Repairing of ConcreteCEMENT-BASED MATERIALS PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/BOX PS/E.-PAL. MEGAGROUT-100 High-strength, non-shrinking, pourable cast grout for repairs 25 kg 54 0323/1 and strengthening. Suitable for concrete jacketing and filling of cavities and cracks in concrete elements, in a thickness up to 100 mm. It is classified as CC R4 mortar according to EN 1504-3. Color: Grey. High-strength, non- Consumption: shrinking pourable cast Approx. 21,5 kg/m2/cm or 2,1 kg for filling volume of 1 lit. grout for repairs and strengthening MEGAGROUT-101 High-strength, non-shrinking pourable cast grout. Suitable for 25 kg 54 0329/1 machinery founding and tenancy, anchoring, precision grouting of base plates of precision machinery installations. Applied in a maximum thickness of 100 mm. It is classified as CC R4 mortar according to EN 1504-3. Color: Grey. High-strength, non- Consumption: shrinking pourable cast Approx. 21,5 kg/m2/cm or 2,1 kg for filling volume of 1 lit. grout for precision grouting of machinery4.1.2 EPOXY-BASED MATERIALS PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/BOX PS/E.-PAL. EPOMAX-STUCCO Two-component, epoxy putty, extra fine-graded. Ideal for 1 kg 18 216 0429/1 puttying any type of surfaces. It is also used for bonding (A+B) (A+B) concrete, steel, stone, wood etc. as well as for restoring damages on concrete and cement mortars. For limited applications, mixing of less quantity of the components A and B is possible, by keeping ratio 1:1 by volume. Color: Grey. Epoxy putty, Two-component, Consumption: extra-fine graded Approx. 1,35 kg/m2/mm thickness layer. EPOMAX-EK Two-component epoxy putty. Used for bonding concrete and 4 kg 96 0421/1 steel, repairing concrete, filling joints and sealing (A+B) (A+B) cracks that will be injected with EPOMAX-L10, EPOMAX-L20, DUREBOND. Color: Grey. 2 kg 6 96 (A+B) (A+B) (A+B) Consumption: Two-component Approx. 1,85 kg/m2/mm. 1 kg 15 240 epoxy putty (A+B) (A+B) (A+B)46
    • Strengthening and Repairing of ConcreteEPOXY-BASED MATERIALS PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/BOX PS/E.-PAL. EPOMAX-L20 Two-component, injectable, solvent-free epoxy resin. It is used 1 kg 15 180 0424/1 for resin injections in concrete elements with cracks 0,1-1 mm (A+B) (A+B) (A+B) wide, ideal fixing and anchoring of reinforcement rods in concrete elements etc. It can be perfectly applied even on damp substrates. Color: Transparent yellow. Consumption: Two-component, Approx. 1,1 kg for filling volume of 1 lit. injectable epoxy resin for cracks 0,1-1,0 mm wide EPOMAX-L10 Two-component, injectable, solvent-free epoxy resin. It is used 3 kg 6 72 0418/1 for resin injections in concrete elements with cracks 0,5-3,0 mm (A+B) (A+B) (A+B) wide, fixing and anchoring of reinforcement rods in concrete elements etc. It can be perfectly applied even on damp substrates. 1 kg 15 180 Color: Transparent yellow. (A+B) (A+B) (A+B) Consumption: Two-component, Approx. 1,1 kg for filling volume of 1 lit. injectable epoxy resin for cracks 0,5-3,0 mm wide DUREBOND Two-component, solvent-free epoxy resin, for bonding fresh 4 kg 6 72 0416/1 concrete to hardened concrete. Also used as injectable resin (A+B) (A+B) (A+B) mortar for resin injections in concrete elements with cracks 3,0 mm wide or more, fixing and anchoring of reinforcement 1 kg 15 180 rods in concrete elements etc. It can be perfectly applied even on damp substrates. (A+B) (A+B) (A+B) Color: Grey. Two-component, Consumption: injectable epoxy resin for As a bonding agent: approx. 0,6 kg/m2. cracks > 3 mm wide. Approx. 1,5 kg for filling volume of 1 lit. Bonding agent NOZZLES For the injection of EPOMAX-L10, EPOMAX-L20 and 100/ps. DUREBOND epoxy resins into structural elements. FOR EPOXY RESIN INJECTIONS 1308/6 EPOMAX-ANCHOR Two-component polyester based anchoring adhesive. It does not Cartr. 0430/6 contain solvents and styrene. Suitable as an anchoring adhesive 300 ml 12 1.008 for reinforced bars, reinforced rods, threaded rods etc. Color: Dark grey. Consumption: Depending on the application. Fast curing anchoring adhesive for reinforcement rods 47
    • Repairing Materials & PaintsStrengthening and Repairing of ConcreteEPOXY-BASED MATERIALS PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/E.-PAL. PLASTIC SLEEVE Plastic sleeve that is used in combination with EPOMAX- ANCHOR for anchoring reinforcement roads to hollow-blocks. FOR HOLLOW-BLOCKS 0430/6 Type: KSH 12 x 50 10 ps./box Type: KSH 15 x 85 10 ps./box Type: KSH 15 x 130 10 ps./box4.1.3 FIBRE REINFORCED POLYMERS (F.R.P.) PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/E.-PAL. EPOMAX-LD Two-component epoxy resin without solvents. Suitable for the 5 kg 72 1501/1 impregnation and bonding of synthetic fibre fabrics such as (A+B) glass fibre or carbon fibre fabrics etc., Used for the structural strengthening or repairing of construction elements like concrete, masonry, wood etc. Color: Grey. Two-component, epoxy Consumption: 2 impregnation adhesive for 0,7-1,2 kg/m , depending on the application. composite fabrics MEGAWRAP-200 Fabric made of continuous unidirectional carbon fibres. Used Roll 1500/1 for the structural strengthening of construction elements. 60 cm x 50 m 20 2 (30 m ) Carbon fabric for structural strengthening EPOMAX-PL Two-component epoxy resin in pasty form. Suitable for bonding 5 kg 72 1502/1 carbon plates used in the structural strengthening of (A+B) construction elements. Consumption: 1,6-1,7 kg/m2/mm. Two-component, epoxy adhesive paste for composite plates48
    • Strengthening and Repairing of ConcreteFIBRE REINFORCED POLYMERS (F.R.P.) PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/E.-PAL. MEGAPLATE High-strength carbon fibre plate used for structural Roll 1503/1 strengthening of construction elements. Industrial product 5 cm x 100 m manufactured from epoxy resins and unidirectional carbon 5 cm x 50 m fibres. Plate thickness: 1,2 mm. Roll 10 cm x 100 m 10 cm x 50 m Carbon plates for structural strengthening4.2 Construction and Repairing of Masonry Wall PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/BOX PS/E.-PAL. ISOMAT MT 80 Pre-mixed, cement-based mortar for masonry. It is used only 25 kg 54 0576/1 with the addition of water. It simplifies and accelerates the 15 kg 90 applications. Used on various types of building materials such as bricks, blocks, aerated concrete blocks, stone, etc. It is classified as type M5 mortar for masonry according to EN 998-2. Color: Grey. Consumption: Indicative consumption for bricks of dimensions Pre-mixed, cement-based 6x9x12 cm: 20 kg/m2 masonry. mortar for masonry ISOMAT MT-80 S Pre-mixed, cement-based mortar for masonry. Due to its special 25 kg 54 0576/1 formula it prevents the formation of salts on masonries which are exposed to the weather conditions. It is used on various types of building materials such as bricks, blocks, stone, etc. It is classified as type M5 mortar for masonry according to EN 998-2. Color: Grey. Pre-mixed, cement- based mortar for Consumption: Indicative consumption for bricks of dimensions exposed masonry 6x9x12 cm: 20 kg/m2 of masonry. UNICRET Mortar suitable for plastering and masonry works. Grey 0309/1 It is classified as type GP CS II W0 mortar according to 25 kg 54 EN 998-1. Color: Grey, white. White Consumption: 25 kg 54 Approx. 15,5 kg/m2/cm. Mortar for plastering and masonry 49
    • Repairing Materials & PaintsConstruction and Repairing of Masonry Wall PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/BOX PS/E.-PAL. UNICRET-FAST Fast-setting white mortar, ideal for quick plaster repairs in old 25 kg 54 0325/1 and new constructions. Replaces the use of gypsum in 5 kg 4 160 respective applications. It is classified as type GP CS I W0 mortar according to EN 998-1. Color: White. Consumption: Approx. 14,7 kg/m2/cm. Fast-setting, white repairing mortar DOMOLIT Mortar plasticizer and setting retarder. Replaces lime. 220 kg 2 0103/1 Color: Dark brown. 20 kg 39 5 kg 4 72 Consumption: For masonry and paving mortars: 50 g per 25 kg of cement. 1 kg 12 324 For plastering mortars: 75 g per 25 kg of cement. Mortar plasticizer - Lime replacement ASOLIT-POWDER Mortar plasticizer in powder form. Replaces lime. 30 kg 45 0125/1 Color: Beige. Consumption: 2,0-5,0 kg per mixer batch of half a bag (25 kg) of cement. Mortar plasticizer in powder form - Lime replacement4.3 Putties, Paints & Protective Materials4.3.1 PUTTIES PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/BOX PS/E.-PAL. STUCCOCRET Spatula putty for smoothing and preparing wall surfaces to be 20 kg 54 0326/6 covered with paint or other coatings. Suitable for surfaces 10 kg 108 made of concrete or plaster. Replaces oil stuccos and other 4 kg 4 160 similar materials. It is classified as type GP CS II W0 mortar according to EN 998-1. Color: White. Consumption: Spatula putty Approx. 1,1 kg/m2/mm.50
    • Putties, Paints & Protective MaterialsPUTTIES PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/BOX PS/E.-PAL. STUCCOCRET-PLUS Polymer-modified, cement-based putty. It is extra fine-graded 20 kg 54 0326/6 and suitable for smoothing and preparing interior wall surfaces NEW to be covered with paint or other coatings. Suitable for surfaces made of concrete or plaster. Replaces oil stuccos and other similar materials. Due to its low weight it is easy to use and covers up to 18% extra surface compared to the conventional putties. It id classified as type GP CS II W0 mortar according to EN 998-1. Color: White. Polymer-modified spatula Consumption: Approx. 0,9 kg/m2/mm. putty PLANFIX Polymer-modified cement putty for repairing and puttying Grey 0308/1 exposed concrete, fixing of pores or cavities etc. 25 kg 54 Color: Grey, white. 5 kg 4 160 Consumption: Approx. 1,3 kg/m2/mm. White 25 kg 54 Polymer-modified cement putty PLANFIX-FINE Polymer-modified cement putty, extra fine-graded, for repairing Grey 0308/1 and puttying exposed concrete. It can be also applied using a 25 kg 54 gunite machine. Color: Grey, white. White Consumption: 25 kg 54 Approx. 1,3 kg/m2/mm. 5 kg 4 160 Polymer-modified cement putty, extra fine-graded PLANFIX-FINE Polymer modified cement putty, extra fine-graded, easily 25 kg 54 applicable, suitable for repairing and puttying exposed concrete, PROFESSIONAL fixing of pores or cavities etc. Lightweight, it can be applied or 0308/1 NEW sanded easily and has little consumption. It can be applied using a gunite machine. Classified as type PCC R1 mortar for concrete repairs, according to EN 1504-3. Color: White. Consumption: Approx. 1,2 kg/m2/mm. Polymer-modified cement putty, extra fine-graded FLEX-COVER Two-component, flexible putty that consists of a cement-based 2,6 kg 110 0222/6 powder (component A) and a resin emulsion (component B). (A+B) Suitable for sealing and waterproofing joints and cracks, on walls or floors. It can be also used on window recesses, junctions between floors and walls, as well as for puttying surfaces with hair-cracks. To be applied on plaster, cement, gypsum boards, wood etc. Ideal for outdoor applications. Color: White. Two-component, flexible putty, for sealing joints Consumption: Joint 5 mm x 5 mm: 40 g/m of joint length. and cracks Puttying: 1,6 kg/m2/mm. 51
    • Repairing Materials & PaintsPutties, Paints & Protective MaterialsPUTTIES PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/BOX PS/E.-PAL. FAST-COVER Ready to use, lightweight acrylic putty for filling and 5 lit 90 0220/6 patching cracks and holes of any kind, in a single step. It is 1 lit 8 320 applied on plaster, gypsum board, wood etc. at a maximum 0,5 lit 16 576 thickness of 5 cm. It does not crack and it doesn’t need to be rubbed. Painting follows after 30 minutes. For indoor and outdoor application. Color: White. Ready-to use, lightweight acrylic putty GB-COVER Ready-to-use acrylic spatula putty. Suitable for stuccoing 20 kg 33 0219/6 (skim coat puttying) and pointing gypsum boards. Provides a 7 kg 60 new flat and smooth final surface, ready for priming and painting. formula Color: White. Consumption: 2,0-3,0 kg/m2, depending on layer thickness. Pasty acrylic gypsum- board putty JOINT-FILLER Polymer-modified, fibre-reinforced, cement-based joint 20 kg 54 0339/1 compound for cement boards. It features great flexibility, high mechanical strength and superb adhesion to the substrate. It can be applied and rubbed easily. It provides a smooth final surface ready for any additional covering (paint, tiles etc.). Color: Grey. Consumption: Joint compound for 100-150 gr per joint meter. cement boards CEMENT High-strength cement for preparing durable cement mortars. Grey Color: Grey, white. HIGH-STRENGTH 4 kg 4 160 0330/6 White 4 kg 4 16052
    • Putties, Paints & Protective Materials4.3.2 EMULSION PAINTS & PRIMERS PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/BOX PS/E.-PAL. ISOMAT CLASSIC High quality emulsion paint for interior use. It is characterized by White 0212/6 excellent surface coverage and workability as well as superb 10 lit 44 resistance to frequent washing and ageing. Provides strong 3 lit 4 110 adhesion to any kind of old or new substrate like plaster, 0,75 lit 12 360 concrete, gypsum boards etc. It gives a final surface with an excellent mat finish. Ammonia free. NCS Colors: White. Pallet 305 selected colors NCS pallet 10 lit 44 High quality emulsion (minimum order quantity 10 lit). 3 lit 4 110 paint for interior use Coverage: Approx. 12 m2 per liter. 1 lit 12 360ISOMAT ÂÁÔÇ & KITCHEN High quality antimold emulsion paint for indoor use. Drastically White 0229/6 prevents mold and bacteria and is ideal for areas with high 10 lit 44 NEW concentration of moisture and vapors, such as kitchens, 3 lit 4 110 bathrooms, basements, ceilings etc. It has strong adhesion to various substrates such as plaster, concrete, bricks, plaster wood 0,75 lit 12 360 etc. Ammonia free. It gives a uniform mat surface. NCS Colors: White. Pallet 256 selected colors NCS pallet 10 lit 44 High quality antimold (minimum order quantity 10 lit). 3 lit 4 110 emulsion paint Coverage: Approx. 12 m2 per liter. 1 lit 12 360 ISOMAT PROFESSIONAL Emulsion paint for interior use. It is recommended for use in White CLASSIC areas, where frequent painting is required, such as in public 10 lit 44 0213/6 buildings, hotels, hospitals, schools, entertainment venues etc. It 3 lit 4 110 is characterized by great workability and surface coverage, as well as high resistance to washing and ageing. Dries and can be recoated rapidly. NCS Colors: White. Pallet 266 selected colors NCS pallet 10 lit 44 Emulsion paint for interior (minimum order quantity 10 lit). 3 lit 4 110 use Coverage: Approx. 12 m2 per liter. FLEX-PRIMERISOMAT HYDROCHROMA Water-based emulsion paint for interior use. It is recommended White 0214/6 for use on new surfaces or surfaces already coated with water- 9 lit 44 based emulsion paint, where washing and soiling resistance are 3 lit 4 110 not required, such as in ceilings, storage rooms, staircases etc. It is characterized by great workability and surface coverage. Colors: White. NCS 205 selected colors NCS pallet Pallet (minimum order quantity 9 lit). 9 lit 44 Water-based emulsion 3 lit 4 110 paint for interior use Coverage: Approx. 11 m2 per liter. FLEX-PRIMER PRIMER CLASSIC Acrylic, micronized, water based primer. It offers excellent 20 lit 39 0212/6 bonding. Suitable for use on new surfaces, such as plasters, 10 lit 60 concrete, bricks etc., that are going to be coated with emulsion 5 lit 4 72 paints. Thinning: Up to 50% with clean water. For highly 1 lit 12 54 absorbing substrates use it undiluted. Color: Blue Coverage: Acrylic, micronized, About 10-15 m2 per liter, per layer. water based primer 53
    • Repairing Materials & PaintsPutties, Paints & Protective MaterialsEMULSION PAINTS & PRIMERS PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/BOX PS/E.-PAL. CL-MOLD Special cleaning fluid with antifungal activity. Cleans and 1 lit 12 324 1402/1 disinfects surfaces from mold, bacteria and algae. It may NEW however be a precaution to prevent the occurrence of microorganisms in high humidity situations. It is very effective for cleaning surfaces such as walls, ceilings, natural stone, brick, concrete, pools, etc. Furthermore, it can be used for decontamination of fungi and maintain sanitary conditions in places such as kitchens, restaurants, hotels, factories or Antifungal cleaning fluid warehouses food, commercial ovens, etc. Color: Blue.Putties, Paints & Protective Materials4.3.3 ACRYLIC PAINTS & PRIMERS PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/BOX PS/E.-PAL. ISOMAT ACRYL Çigh quality acrylic emulsion paint for exterior use. It is White 0205/6 characterized by high water-repellency, excellent surface coverage 10 lit 44 and durability in harsh weather conditions and ageing. It is also vapor permeable allowing the building to breathe. Provides strong 3 lit 4 110 adhesion to any kind of old or new substrate like plaster, concrete, 0,75 lit 12 360 wood etc. It has an excellent workability and dries quickly. It gives NCS a final surface with an excellent mat finish. Certified as cool paint Pallet Colors: White. 10 lit 44 305 selected colors NCS pallet Çigh quality acrylic emulsion (minimum order quantity 10 lit). 3 lit 4 110 paint for exterior use 2 Coverage: Approx. 12 m per liter. 1 lit 12 360 ISOMAT SILICONE High quality new generation silicone paint for outdoor use. White 0230/6 Characterized by high water and vapor permeability and 10 lit 44 NEW excellent surface coverage. It shows strong adhesion to all types 3 lit 4 110 of new or old substrate, such as plaster, concrete, wood etc. It is ideal for areas with high humidity and extreme weather condition. It gives a uniform mat surface. NCS Colors: White. Pallet 180 selected colors NCS pallet 10 lit 44 (minimum order quantity 10 lit). High quality silicone 2 3 lit 4 110 Coverage: Approx. 12 m per liter. paint FLEXCOAT Elastic, waterproofing paint. Offers total water impermeability White 0202/6 for the protection of walls against rain. It has high elasticity and 44 10 lit crack bridging ability on surfaces that show hairline cracks. 3 lit 4 110 Suitable for painting and waterproofing walls, protecting of bituminous layers etc. For exterior and interior use. Colors: White. NCS 266 selected colors NCS pallet Pallet (minimum order quantity 10 lit). 10 lit 44 High quality, elastic, 3 lit 4 110 Coverage: 8-12 m2 per liter. waterproofing paint54
    • Putties, Paints & Protective MaterialsACRYLIC PAINTS & PRIMERS PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/BOX PS/E.-PAL. ISOMAT PROFESSIONAL Acrylic emulsion paint for exterior use. It is recommended for White new or old surfaces that require frequent painting, such as 10 lit 44 ACRYL public buildings, hotels, hospitals, schools as well as surfaces 0208/6 3 lit 4 110 that are tarnished by graffiti. It is characterized by great workability and surface coverage, as well as high resistance to ageing. Dries and can be recoated rapidly. NCS Colors: White. Pallet 266 selected colors NCS pallet (minimum order 10 lit 44 Acrylic emulsion paint quantity 10 lit). 3 lit 4 110 for exterior use Coverage: Approx. 12 m2 per liter. FLEX-PRIMER Highly penetrative, polymer aqueous emulsion. Used in 20 kg 39 0224/6 combination with the highly elastic waterproofing paint 10 kg 44 FLEXCOAT, it forms an ideal system for the waterproofing of 5 kg 4 72 walls. It is also the ideal primer for the acrylic pasty plaster 1 kg 12 324 MARMOCRYL. Color: White. Coverage: 5-10 m2/kg. The package of 10kg is available in round, plastic container that High quality acrylic is useful for preparing colored primer. A colored primer is water-based primer necessary when the substrates will be covered with acrylic plasters of base D & TR. PRIMER ACRYL Silicone acrylic micronized water based primer. It offers 20 lit 39 0205/6 excellent bonding, high penetration as well as durability to 10 lit 60 alkaline surfaces. Protects from rising moisture and salts stains 5 lit 4 72 and stabilizes weak substrates. It is recommended for use on 1 lit 12 324 new or old external porous surfaces that are going to be covered with paints or plasters. Thinning: Up to 50% with clean water. For highly absorbing substrates use it undiluted. Color: Light yellow Silicone acrylic micronized water based primer Coverage: About 10-15 m2 per liter, per layer. PRIMER ACRYL-S Acrylic, solvent based primer. It offers excellent bonding and 15 lit 24 0208/6 high penetration. Penetrates and anchors to the substrate and 5 lit 4 72 stabilizes weak substrates. It is recommended for use on new 1 lit 12 288 or old porous surfaces that are going to be covered with paints or plasters. It dries and is recoated rapidly. Thinning: Up to 100% with SM-18. For highly absorbing substrates use it undiluted. Color: Transparent Acrylic, solvent based primer Coverage: About 10-15 m2 per liter, per layer. SM-18 Special solvent used as a thinner of the primer PRIMER ACRYL-S 20 lit 39 1407/6 and to clean the tools after use. 5 lit 4 72 0,75 lit 12 324 Solvent for PRIMER ACRYL-S* Packages marked with an asterisk are available 3 days after reception of order. 55
    • Repairing Materials & PaintsPutties, Paints & Protective Materials4.3.4 ENAMEL PAINTS & PRIMERS PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/BOX PS/E.-PAL. FLEX-PRIMER ISOLAC ÁQUA Excellent new generation water-based quality enamel paint for White wood surfaces. Suitable for indoor and outdoor use. satin Characterized by high elasticity, excellent coverage and 2,50 lit 4 140 0241/6 NEW 0,75 lit 12 360 outstanding resistance to weathering and aging. It offers strong adhesion and is suitable for repainting surfaces coated with paint or old water solvent enamels (enamel or oil paint). NCS It gives a uniform satin surface. Pallet Colors: White. 2,50 lit 4 140 305 selected colors NCS pallet Premium quality water 0,75 lit 12 360 (minimum order quantity 2,5 lit). enamel. Satin surface Coverage: Approx. 12 m2 per liter. FLEX-PRIMER ISOLAC ÁQUA Excellent new generation water-based quality enamel paint for White wood surfaces. Suitable for indoor and outdoor use. gloss Characterized by high elasticity, excellent coverage and 2,50 lit 4 140 0240/6 NEW 0,75 lit 12 360 outstanding resistance to weathering and time. It offers strong adhesion and is suitable for repainting surfaces coated with paint or old water solvent enamels (enamel or oil paint). NCS It gives a uniform glossy surface. Pallet Colors: White. 2,50 lit 4 140 305 selected colors NCS pallet Premium quality water 0,75 lit 12 360 (minimum order quantity 2,5 lit). enamel. Glossy surface Coverage: Approx. 12 m2 per liter. FLEX-PRIMER ISOLAC PRIMER Acrylic water based primer for wooden surfaces. Suitable for 2,50 lit 4 140 áqua indoor and outdoor use. It provides excellent adhesion to the 0,75 lit 12 360 0240/6 NEW substrate and great coverage. Used in new or old wood surfaces and is the ideal substrate for water-based enamel paint ISOLAC AQUA. It is odorless and environmentally and user friendly. Color: White. Coverage: Acrylic water based Approx. 12 m2 per liter. primer for wooden surfacesPutties, Paints & Protective Materials4.3.5 EPOXY PAINTS & PRIMERS PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/BOX PS/E.-PAL. EPOXYCOAT Two-component, solvent-based epoxy coating. Provides high 8 kg 39 0405/1 resistance to abrasion, chemical effects and weather conditions. (A+B) (A+B) Color: RAL 9016 (white), RAL 7035 (light grey), RAL 7040 (grey), RAL 1015 (beige). Other RAL colors by order (minimum quantity 120 kg). Consumption: 200-300 g/m2/layer. Two-component epoxy coating56
    • Putties, Paints & Protective MaterialsEPOXY PAINTS & PRIMERS PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/BOX PS/E.-PAL. EPOXYCOAT-S Two-component, solvent-based, epoxy coating. Provides high 9,6 kg 39 0406/1 resistance to abrasion, chemical effects and weather conditions, (A+B) (A+B) as well as enhanced flexibility. Ideal for the painting of swimming pools. Color: Blue of the pool, RAL 9003 (white). Other RAL colors by 2 kg 6 72 order (minimum quantity 144 kg). (A+B) (A+B) (A+B) Consumption: Two-component epoxy 200-300 g/m2/layer. coating suitable for swimming poolsEPOXYCOAT-W Two-component, water based epoxy coating. Especially suitable 9 kg 39 0420/1 for priming on wet or fresh (age < 28 days) concrete surfaces. (A+B) (A+B) Provides high resistance to abrasion, chemical effects and weather conditions. Color: RAL 7035 (light grey), RAL 1015 (beige). 3 kg Other RAL colors by order (minimum quantity 120 kg). (A+B) Consumption: Two-component, water- 200-300 g/m2/layer. based epoxy coatingEPOXYCOAT-VSF Two-component, solvent-free epoxy coating. It offers high 10 kg 39 0406/1 hardness and abrasion resistance. It is specially designed for (A+B) (A+B) aggressive chemical environments such as petroleum, high acids, alkalis etc. 2 kg 6 72 Color: RAL 7032 (sand grey). Other RAL colors by special order (A+B) (A+B) (A+B) (minimum quantity 120 kg).Two-component, epoxy Consumption:coating for aggressive 200-300 g/m2/layer.chemical environmentsEPOXYCOAT-AC Two-component, anticorrosive, solvent-based epoxy primer 8 kg 39 0413/1 for metal surfaces. Used alone as a final coat or as an (A+B) (A+B) anticorrosive primer of EPOXYCOAT-W, EPOXYCOAT-VSF, EPOXYCOAT and EPOXYCOAT-S. Color: RAL 3009 (redbrown), RAL 7040 (grey). Other RAL 3 kg 6 72 colors by order (minimum quantity 120 kg). (A+B) (A+B) (A+B) Consumption: Two-component 150-200 g/m2/layer. anticorrosive epoxy coatingDUROFLOOR-BI Two-component, colorless, solvent-based epoxy resin. Used as 10 kg 48 0403/2 an impregnation on cement-based substrates to provide higher (A+B) (A+B) stability and abrasion resistance. Prevents dust creation on floor surface. Also, used as a primer for EPOXYCOAT-VSF, EPOXYCOAT and EPOXYCOAT-S. 4 kg 105 (A+B) (A+B) Two-component, Consumption: colorless epoxy 150-250 g/m2/layer. impregnation 57
    • Repairing Materials & PaintsPutties, Paints & Protective MaterialsEPOXY PAINTS & PRIMERS PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/BOX PS/E.-PAL. SM-14 Thinner for the epoxy coatings EPOXYCOAT, EPOXYCOAT-S 5 lit 4 72 1407/1 and EPOXYCOAT-AC, and cleaner for tools used in applications of the above epoxy materials. Special solvent for epoxy coatingsPutties, Paints & Protective Materials4.3.6 PROTECTIVE MATERIALS & VARNISHES PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/BOX PS/E.-PAL. PS-20 Ready-to-use, silicone-based, transparent solution with 20 lit 24 (former PROTESIL) solvents for waterproofing. It ensures extremely high water- 3 lit 4 120 0207/1 repellence and long term protection. It can be applied on 1 lit 18 288 various surfaces (natural or synthetic stone, unpainted plaster, exposed masonry, decorative bricks, roof tiles, tiles, exposed concrete etc.) for their protection against rain effect. Also suitable for waterproofing tile joints. Color: Transparent Silicone-based solution for waterproofing Consumption: 0,2-0,4 lit/m2. PS-21 Ready-to-use, silicone-based solution without solvents for 20 lit 39 (former PROTESIL-W) waterproofing. It ensures extremely high water-repellence and 5 lit 4 72 0207/1 long term protection. It is suitable for waterproofing of tile joints 1 lit 12 324 and the protection against rain effect of various surfaces like natural or synthetic stone, plaster, exposed masonry, decorative bricks, roof tiles, tiles, unpolished marble, exposed concrete etc.). It can be used even on slightly wet substrates. Silicone-based solution Color: White (transparent after drying) without solvents for waterproofing Consumption: 0,2-0,4 lit/m2. NANOPRO-C Water-based emulsion with high penetrating ability, based on 220 lit 2 0228/1 nano-molecular structure. Protects porous surfaces, from 20 lit 39 moisture and salt stains. Suitable for concrete, masonry, plaster, 5 lit 4 72 tile grouts, gypsum boards, chip boards, natural stones etc. For 1 lit 12 324 indoor and outdoor applications. Color: White (transparent after drying) Consumption: Nano-impregnation for 100-200 ml/m2, depending on the substrates absorptivity. protecting porous surfaces58
    • Putties, Paints & Protective MaterialsPROTECTIVE MATERIALS & VARNISHES PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/BOX PS/E.-PAL. NANOPRO-M Water-based emulsion with highly penetrating ability based on 220 lit 2 0228/1 nano-molecular structure. Protects unporous surfaces, from 20 lit 39 moisture and salt stains. Suitable for polished marbles, granites, 5 lit 4 72 tiles, porcelain etc. For indoor and outdoor applications. 1 lit 12 324 Color: White (transparent after drying) Consumption: 50-70 ml/m2, depending on the substrates absorptivity.Nano-impregnation forprotecting marbles NANOPRO-L Water-based emulsion with high penetrating ability, based on 20 lit 39 0228/1 nano-molecular structure. Protects porous and slightly porous 5 lit 4 72 surfaces (marbles, granites etc) from oil stains, moisture and 1 lit 12 324 salt stains and prevents from fungi-mould growth. Suitable for concrete, masonry, plaster, tile grouts, gypsum boards, chip boards, natural stones etc. For indoor and outdoor applications. Color: White (transparent after drying) Nano-impregnation to Consumption: protect surfaces against 50-100 ml/m2, depending on the substrates absorptivity. oils VS-1 Ready-to-use, transparent acrylic varnish, used to impregnate 10 lit 56 0216/6 and brighten up natural stone (slate or sinter stone etc.) and 4 lit 4 72 artificial building materials (decorative bricks, roof tiles etc). 1 lit 12 288 VS-1 brings out the natural color of the material on which it is applied, protecting at the same time the surfaces from the influence of rainwater, weather effects and atmospheric pollution. It is applied on walls and floors, in indoor or outdoor Acrylic stone varnish areas. Consumption: 150-200 ml/m2 per layer, depending on the absorptivity of the surface. ISOMAT AG 77 Brushable, paraffin-based emulsion. It protects surfaces from 3 lit 96 0221/6 several kinds of stains, such as spray or paint graffiti, 1 lit 8 320 environmental impurities etc. Permitting easy cleaning of the surface, without affecting their structure appearance. It provides great durability in time and weather effects. It can be applied on painted or non-painted surfaces of concrete, plaster, stone, metal etc. Anti-graffiti protection Consumption: emulsion 50-100 ml/m2, depending on the absorptivity of the surface. 59
    • Repairing Materials & Paints4.4 Cleaning Agents PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/BOX PS/E.-PAL. CL-CLEAN Tile and natural stone cleaner. Removes lime residues, plaster, 20 kg 39 1402/1 cement etc. 5 kg 4 72 1 kg 12 324 Tile & natural stone cleaner SM-12 Thinner for epoxy products and cleaner of tools used in epoxy 5 lit 4 72 1401/1 system applications. Used in combination with Isomat AG 77 to clean surfaces from graffiti. Special solvent for epoxy systems SM-16 Solvent used to dilute polyurethane coatings. Especially suitable 5 lit 4 72 1407/1 for diluting the brushable polyurethane waterproofing membrane ISOFLEX-PU, when applied by spraying. It can also clean tools used for the application of ISOFLEX-PU and also tools from epoxy coatings residues. Additionally it can be used as a thinner for epoxy coatings. For polyurethane coatings SM- 16 is added in a proportion up to 10% by weight. Special solvent for polyurethane coatings FD-CLEAN Removes oil and grease residues from concrete floors by 18 kg 39 1403/1 emulsification. 4 kg 4 72 Oil/grease remover from concrete floors CL-MOLD Special cleaning fluid with antifungal activity. Cleans and 1 lit 12 324 1402/1 disinfects surfaces from mold, bacteria and algae. It may NEW however be a precaution to prevent the occurrence of microorganisms in high humidity situations. It is very effective for cleaning surfaces such as walls, ceilings, natural stone, brick, concrete, pools, etc. Furthermore, it can be used for decontamination of fungi and maintain sanitary conditions in places such as kitchens, restaurants, hotels, factories or Antifungal cleaning fluid warehouses food, commercial ovens, etc. Color: Blue.60
    • Cleaning Agents PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/BOX PS/E.-PAL. CL-UNIVERSAL General use liquid cleaner. It is used to remove stains of coffee, *20 lit 39 1402/1 wine, oils, grease and other similar stains from tiles, marbles, 5 lit 4 72 granites, formicas etc. 0,75 lit 12 324 Consumption: 1 lit/15-20m2. General use cleaner CL-GROUT Liquid cleaner for tile grouts. It is used to clean tile grouts from *20 lit 39 1402/1 salts, mould, stains of coffee, wine etc. 5 lit 4 72 0,75 lit 12 324 Consumption: 1 lit/15-20m2. Special cleaner for tile grouts CL-MARBLE Liquid cleaner for marbles and granites.It is used to clean stains *20 lit 39 1402/1 of coffee, wine, oils, nicotine, ash and other stains from marbles 5 lit 4 72 and granites. It does not contain any acid and does not affect 0,75 lit 12 324 the sensitive surfaces. It is applied undiluted on the stained surface and is left to act until the stain is disappeared. It usually takes 24 hours until a stain is removed completely. For difficult stains repeat the same process. Special cleaner for Consumption: marbles and granites 1 lit/15-20m2. CL-INDUSTRY Liquid cleaner for industrial areas.It is used to clean stains of *1000 lit 1402/1 oils, grease and other intense stains from tiles, concrete, walls, *20 lit 39 epoxy floorings, metallic surfaces etc. Due to its effective 5 lit 4 72 formula it is ideal for cleaning stains in industrial areas. 0,75 lit 12 324 Consumption: 1 lit/15-20m2. Special cleaner for industrial floorings CL-EPOXY FLOOR Liquid cleaner for epoxy floorings. It is used to clean stains of *1000 lit 1402/1 oils, grease and other intense stains from epoxy floorings. *20 lit 39 5 lit 4 72 Consumption: 0,75 lit 12 324 1 lit/15-20m2. Special cleaner for epoxy floorings* Packages marked with an asterisk are available by order. 61
    • Repairing Materials & Paints4.5 Elastic Joint Sealants PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/BOX PS/E.-PAL. ISOMASTIC-A Elastoplastic sealant without solvents based on acrylic White 0601/6 polymers. Suitable for sealing work joints, thin expansion joints 280 ml 25 1.125 or plaster cracks in interior or exterior areas. Also suitable for slightly wet surfaces. Easily paintable. Color: White, grey. Consumption: Joint 10 mm x 10 mm: 1 cartridge/2,8 m of joint length. Joint 5 mm x 5 mm: 1 cartridge/11,2 m of joint length. Elastoplastic acrylic sealant DOMOSIL High performance, general-purpose silicone sealant for sealing Transparent 0623/6 joints 3 to 40 mm wide, on surfaces of non-porous materials 280 ml 25 1.125 such as glass, aluminum, porcelain (e.g. tiles), ceramic etc. It cannot be overpainted. Color: Transparent, white. White 280 ml 25 1.125 Consumption: Joint 10 mm x 10 mm: 1 cartridge/3 m of joint length. Joint 5 mm x 5 mm: 1 cartridge/12 m of joint length. General-purpose silicone sealant DOMOSIL-S High performance, mildew resistant silicone sealant for sealing Transparent 0622/6 joints 3 to 40 mm wide, on surfaces of non-porous materials such as 280 ml 25 1.125 glass, aluminum, porcelain (e.g. tiles), ceramic etc. Also suitable for applications in high moisture sanitary areas such as bathrooms and kitchens, as well as in hospital areas, laboratories etc. Prevents fungi White development that creates stains and black spots. It is not 280 ml 25 1.125 recommended for aquariums since it contains fungicide. It cannot be overpainted. Color: Transparent, white. Consumption: Mildew-resistant silicone Joint 10 mm x 10 mm: 1 cartridge/3 m of joint length. sealant Joint 5 mm x 5 mm: 1 cartridge/12 m of joint length. DOMOSIL-MICRO High performance, anti-mould silicone sealant with built-in Transparent ® 0622/6 Microban antibacterial protection technology. Remains color 280 ml 12 900 stable even after 10 years. Appropriate for sealing joints of 3- 40mm wide in non-porous materials such as glass, aluminium, porcelain and non-porous ceramics. It is applied in high humidity White areas such as kitchens, bathrooms, etc. It is not recommended for 280 ml 12 900 use in aquariums and cannot be overpainted. Color: Transparent, white. Anti-mould silicone Consumption: sealant with built in Joint 10mm x 10mm: 1 cartridge/3 m of joint length. Microban® technology Joint 5mm x 5mm: 1 cartridge/12 m of joint length. DOMOSIL-POOL Silicone sealant resistant to permanent water immersion such Transparent 0622/6 as swimming pools, aquariums etc. Appropriate for sealing 280 ml 25 1.125 vertical or horizontal joints 3-40mm wide, for indoor and outdoor applications. It has very good adhesion on surfaces such as glass, porcelain, aluminium, ceramics etc. Suitable for sealing joints on boats, glass-structures etc. It cannot be overpainted. Color: Transparent. Consumption: Silicone sealant for Joint 10mm x 10mm: 1 cartridge/3 m of joint length. permanent water Joint 5mm x 5mm: 1 cartridge/12 m of joint length. immersion62
    • Elastic Joint Sealants PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/BOX PS/E.-PAL.FLEX PU-20 One-component, solvent-free polyurethane sealing mastic. Ideal Grey0627/6 for sealing joints where high elasticity is required. Suitable for 600 ml 20 1.000 joints in concrete, brickwork, natural and synthetic stones, steel, 310 ml 12 1.560 aluminium, wood, ceramic tiles, rigid plastic etc. For outdoor and indoor applications. Color: Grey, white. White 600 ml 20 1.000 Consumption:Polyurethane construction Joint 10 mm x 10 mm: 1 cartridge/3 m of joint length.joint sealant Joint 5 mm x 5 mm: 1 cartridge/12 m of joint length.FLEX PU-40 One-component, solvent-free polyurethane sealing and adhesive Grey0626/6 mastic. Exceptional adhesion to all building materials, e.g. 600 ml 20 1.000 concrete, brickwork, natural and synthetic stones, steel, 310 ml 12 1.560 aluminium, wood, ceramic tiles, rigid plastic etc. For outdoor White and indoor applications. Color: White, grey, brown. 600 ml 20 1.000 310 ml 12 1.560 Consumption: BrownPolyurethane adhesive Joint 10 mm x 10 mm: 1 cartridge/3 m of joint length. 600 ml 20 1.000and sealant Joint 5 mm x 5 mm: 1 cartridge/12 m of joint length. 310 ml 12 1.560FLEX PU-30 S One-component, polyurethane sealing mastic with solvents. Grey0626/6 Ideal for sealing joints where high elasticity is required. Suitable 600 ml 15 750 NEW for joints 5-50mm wide in concrete, brickwork, natural and 310 ml 25 1500 synthetic stones, steel, aluminium, wood, ceramic tiles etc. For outdoor and indoor applications. Color: Grey, white. White 600 ml 15 750 Consumption: 310 ml 25 1500Polyurethane sealant Joint 10mm x 10mm: 1 cartridge/3 m of joint length. Joint 5mm x 5mm: 1 cartridge/12 m of joint length.FLEX PU-50 S One-component, polyurethane sealing and adhesive mastic with Grey0626/6 solvents. Exceptional adhesion to all building materials, e.g. 600 ml 15 750 NEW concrete, brickwork, natural and synthetic stones, steel, 310 ml 25 1500 aluminium, wood, ceramic tiles etc. Suitable for joints 5-30mm wide. For outdoor and indoor applications. White Color: Grey, white. 600 ml 15 750 Consumption: 310 ml 25 1500Polyurethane adhesive Joint 10mm x 10mm: 1 cartridge/3 m of joint length.and sealant Joint 5mm x 5mm: 1 cartridge/12 m of joint length.FLEX PU-2K Two-component joint sealant based on polyurethane resins. 5 kg 4(A) 27(A)0633/6 Ideal for sealing horizontal and vertical concrete joints in floors (A+B) 6(B) 18(B) NEW and structures like reservoirs, canals etc. Available in two types: FLEX PU-2KV: For vertical surfaces. FLEX PU-2KH: For horizontal surfaces Color: Grey2-component Consumption: 1,45 kg/lit of joint volumepolyurethane joint sealant 63
    • Repairing Materials & PaintsElastic Joint Sealants PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/BOX PS/E.-PAL. FLEX MS-45 Elastomeric sealing and adhesive mastic with excellent bonding Grey 0629/6 to any kind of building material such as glass, aluminium, wood, 280 ml 25 1.125 PVC etc. It features high mechanical strength and great endurance to ageing. It is also suitable for slightly wet substrates. It is used for strong, elastic adhesions. Redbrown Color: Grey, redbrown. 280 ml 25 1.125 Consumption: Elastomeric adhesive Indicative consumption: 1 cartridge /10 linear meters. and sealant ELASTOTAN Elastomeric sealing and adhesive mastic with exceptional Grey 0607/6 adhesion to all building materials e.g. glass, aluminium, wood, 600 ml 15 PVC etc. It features high mechanical strength and resistance to 280 ml 25 1.125 ageing and weather conditions. Suitable for sealing joints 3 to 50 mm wide. Color: White, grey. White Consumption: 600 ml 15 Joint 10 mm x 10 mm: 1 cartridge/2,8 m of joint length. 280 ml 25 1.125 Elastomeric adhesive Joint 5 mm x 5 mm: 1 cartridge/11,2 m of joint length. mastic sealant TIXOPHALTE Ready-to-use, cold-applied elastoplastic adhesive bituminous Black 0624/6 mastic sealant. Possesses superior permanent flexibility and 310 ml 24 1.440 excellent adhesion to all kinds of materials under various conditions, even underwater. Color: Black. Consumption: Approx.1,4 kg/lit of joint volume. Elastoplastic & adhesive bituminous mastic sealant ISOMAT PU FOAM One-component, self-expanding polyurethane foam. It has an 750 ml 12 1.020 0632/6 excellent adhesion on wood, cement, stone, metal etc. It is used for fixing door and window frames, filling holes, sealing voids on roofs and insulating materials etc. One-component moisture cure polyurethane foam ISOMAT PU FOAM Moisture curing, one-component, low expansion polyurethane 750 ml 12 1.020 foam. It offers excellent bond strength to most materials (wood, PROFESSIONAL 0632/6 plaster, concrete, stone, metal, etc.), heat and noise insulation, NEW resistance to moisture and ageing. It is used as an aid to mechanically fixing door and window frames, filling holes, gaps, cracks and cavities to insulating materials, filling gaps around pipes going through walls etc. One-component, low expansion, polyurethane foam64
    • 4.6 Bituminous Repairing Materials PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/BOX PS/E.-PAL.ASPHALTOS Ready-to-use, cold asphalt mixture for patching small 25 kg 361010/6 potholes on asphalt or concrete pavements. It enables high flexibility, without being cracked due to contraction-expansion effects. It has superb adhesion to the substrate and features high resistance to weather conditions and aging. Color: Black. Consumption:Cold asphalt mix for Approx. 21 kg/m2 /cm of layer thickness.instant road repairISOMAC Bituminous mastic with excellent adhesion and elasticity. It can 20 kg 361018/6 be cold-applied with a smooth trowel. Suitable for sealing joints 5 kg 120 on horizontal and vertical surfaces, for sealing-bridging hair cracks and for flashing (sealing) difficult points during the fixing of bituminous membranes (drainpipes, joints or junctions in parapets etc). Also used for repairing in waterproofing layers formed by bituminous membranes.Bituminous mastic Color: Black. Consumption: 1,2-1,3 kg/lit. 65
    • Repairing Materials & Paints66
    • 5. Premixed Plasters 5.1 Cement-Based Plasters 5.2 Acrylic Plasters 5.3 Silicone Plasters 5.4 Plaster Primers 5.5 Plastering Reinforcement Materials 67
    • 5. Premixed Plasters5.1 Cement-Based Plasters PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/BOX PS/E.-PAL.MARMOCRET-BOND Pre-mixed, cement-based plaster, used to create the bonding 25 kg 54 0340/1 spatterdash of the subsequent plaster layer. Suitable for creating the bonding spatterdash (rough cast) on concrete, masonry, thermo-insulation boards etc. in order to enhance the adhesion of the “base layer” of plaster that follows. Needs only the addition of water. Ideal for application with plastering machine. It classified as type CS IV, W1 mortar according to EN 998-1. Color: Grey. Mortar for bonding Consumption: spatterdash of plaster Approx. 5 kg/m . 2 MARMOCRET-BASE Pre-mixed, cement-based plaster, used to create the “base layer” 25 kg 54 0341/1 (brown coat) of plaster. It constitutes the ideal substrate of the colored, water-repellent finish coat plasters application with plastering machine. Needs only the addition of water. It is classified as type CS II, W0 mortar according to EN 998-1. Color: Grey. Consumption: Approx. 13,5 kg/m2/cm of plaster thickness. Pre-mixed plaster for the base layersMARMOCRET 1 Pre-mixed, one layer plaster. Applied on maximum thickness of Grey 0306/1 3 cm per layer. Its usage requires the application of a bonding 30 kg 48 spatterdash (rough cast).Is mixed only with water. The plaster is applied with a plastering machine or by hand, using a float or a White trowel. It is classified as type CS II, W1 mortar according to EN 998-1. 30 kg 48 Color: Grey, white. Consumption: One layer plaster Approx. 15 kg/m2/cm. MARMOCRET Fine Decorative, water-repellent finish coat plaster, for the 25 kg 54 0311/1 preparation of smooth surfaces. Needs only water. It is classified as type CS II, W1 mortar according to EN 998-1. Color: White. Other colors by order (minimum quantity 6.000 kg). Consumption: Approx. 1,4 kg/m2/mm of plaster thickness. Pre-mixed, colored, Recommended thickness: 2-5 mm. water-repellent plaster for smooth final surface MARMOCRET Decor Decorative, water-repellent finish coat plaster, for the 25 kg 54 0312/1 preparation of rough-textured surfaces. Needs only water. It is classified as type CS II, W1 mortar according to AI 998-1. Color: White. Other colors by order (minimum quantity 6.000 kg). Consumption: Approx. 1,5 kg/m2/mm of plaster thickness. Pre-mixed, colored, water- Recommended thickness: 2,5-3,5 mm. repellent plaster, for rough- textured final surface68
    • Cement-Based Plasters PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/BOX PS/E.-PAL.MARMOCRET Fine Decorative, polymer-modified, water-repellent finish-coat White0336/1 plaster, white or colored for smooth final surface. It is applied PLUS on substrates with special demands in elasticity and adhesion. 25 kg 54 MARMOCRET Needs only water. In combination with the fibre-reinforced adhesive Isomat AK-THERMO it is used as a system for Pallet application on facade thermo-insulation boards. It is classified 25 kg 54 as type CS II, W2 mortar according to EN 998-1. Color: White and 7 fixed colors (MARMOCRET pallet). OtherPolymer-modified, colored, Other colors by order (minimum quantity 6.000 kg). 2 colorswater-repellent plaster, for Consumption: Approx. 1,4 kg/m /mm of plaster thickness. Recommended thickness: 2-3 mm. 25 kg 54smooth final surfaceMARMOCRET Decor Decorative, polymer-modified, water-repellent finish-coat White plaster, white or colored for rough-textured final surface. It is0337/1 PLUS 25 kg 54 applied on substrates with special demands in elasticity and adhesion. Needs only water. In combination with the MARMOCRET fibre-reinforced adhesive Isomat AK-THERMO it is used as a Pallet system for application on facade thermo-insulation boards. 25 kg 54 It is classified as type CS II, W2 mortar according to EN 998-1. Color: White and 7 fixed colors (MARMOCRET pallet).Polymer-modified, colored, Other colors by order (minimum quantity 6.000 kg). Otherwater-repellent plaster, for 2 colors Consumption: Approx. 1,4 kg/m /mm of plaster thickness.rough-textured finalsurface Recommended thickness: 2,5-3,5 mm. 25 kg 54MARMOCRET Polymer-modified, water-repellent, cement-based finish coat 25 kg 540341/1 plaster. It consists of aggregate with a special particle size GRAFFIATO granulation, to form an extra coarse-textured decorative surface. It is applied on substrates with special demands in elasticity and adhesion. In combination with the fibre-reinforced adhesive Isomat AK-THERMO it is used as a system for application on thermo-insulation boards. It is classified as type CS III, W2 mortar according to EN 998-1. Color: White.Polymer-modified, water- Consumption: 2repellent plaster, for rough- Approx. 1,5 kg/m /mm of plaster thickness.textured final surface. Recommended thickness: 3-4 mm.MARMOCRET-S Mortar-binder for preparation of white, water-repellent plasters. 15 kg 600304/1 To be mixed with marble sand and water. Color: White. Consumption: 1 bag/10 m2/5 mm.Mortar-binder for thepreparation of whitewater-repellent plastersMARMOCRET-SP Restoration plaster, particularly durable to salts and moisture. 25 kg 540304/1 Suitable for the restoration of renders in buildings located near to the sea or in areas exposed to rising damp. Appropriate also for areas with high humidity such as bathrooms, basements etc. For indoor and outdoor applications. Color: white. Consumption:Restoration plaster for Approximately 10 kg/m2/cm.renovation 69
    • 5. Premixed PlastersCement-Based Plasters PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/BOX PS/E.-PAL. ISOMAT ST-1 Special impregnation for the restoration of salt damaged 20 kg 39 0224/1 masonry. It transforms water soluble salts such as chlorides 5 kg 4 72 and sulphates into insoluble compounds. It is used for the 1 kg 12 324 restoration of salt damaged masonry in combination with the renovation plaster MARMOCRET-SP. Consumption: 0,4-0,5 kg/m2. Impregnation of salt damaged masonry UNICRET Mortar suitable for plastering and masonry works. Grey 0309/1 It is classified as type GP CS II W0 mortar according to 25 kg 54 EN 998-1. Color: Grey, white. White Consumption: 25 kg 54 Approx. 15,5 kg/m2/cm. Mortar for plastering and masonry UNICRET-FAST Fast-setting white mortar, ideal for quick plaster repairs in old 25 kg 54 0325/1 and new constructions. Replaces the use of gypsum in 5 kg 4 160 respective applications. It is classified as type GP CS I W0 mortar according to EN 998-1. Color: White. Consumption: Approx. 14,7 kg/m2/cm. Fast-setting, white repairing mortar ISOMAT MT 80 Pre-mixed, cement-based mortar for masonry. It is used only 25 kg 54 0576/1 with the addition of water. It simplifies and accelerates the 15 kg 90 applications. Used on various types of building materials such as bricks, blocks, aerated concrete blocks, stone, etc. It is classified as type M5 mortar for masonry according to EN 998-2. Color: Grey. Consumption: Indicative consumption for bricks of dimensions Pre-mixed, cement-based 6x9x12 cm: 20 kg/m2 masonry. mortar for masonry ISOMAT MT-80 S Pre-mixed, cement-based mortar for masonry. Due to its special 25 kg 54 0576/1 formula it prevents the formation of salts on masonries which are exposed to the weather conditions. It is used on various types of building materials such as bricks, blocks, stone, etc. It is classified as type M5 mortar for masonry according to EN 998-2. Color: Grey. Pre-mixed, cement-based Consumption: Indicative consumption for bricks of dimensions mortar for exposed 6x9x12 cm: 20 kg/m2 of masonry. masonry70
    • 5.2 Acrylic Plasters PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/BOX PS/E.-PAL.MARMOCRYL Fine Acrylic, ready-to-use, white or colored, water-repellent coat White0345/6 1 mm plaster. Suitable for creating a smooth surface. Aliminates the 25 kg 240346/6 1,5 mm need of facade painting. Due to its high elasticity and its 2,0 mm excellent bonding to the surface MARMOCRYL Fine is also an NCS0347/6 ideal final layer for external thermo-insulated facades. Color: White and 305 selected (NCS pallet). Pallet Other colors by order (minimum quantity 150 kg). 25 kg 24 Recommended thickness: MARMOCRYL Fine 1 mm: 1 mm. White MARMOCRYL Fine 1,5 mm: 1,5 mm. *5 kg 75 MARMOCRYL Fine 2 mm: 2 mm.Acrylic, ready-to-use, NCScolored, water-repellent Consumption: Approx. 1,8 kg/m2/mm Palletplaster for smooth final *5 kg 75surface The colors of MARMOCRYL Fine may present small differences from those of FLEXCOAT and ISOMAT-ACRYL because of the plasters texture. *The package of 5 kg is available only in MARMOCRYL Fine 1,5mm.MARMOCRYL Decor Acrylic, ready-to-use, white or colored, water-repellent finish White0349/6 2 mm coat plaster. Suitable for creating a rough-textured decorative 25 kg 24 surface. Eliminates the need for painting. Due to its high0350/6 3 mm elasticity and its excellent bonding to the surface MARMOCRYL NCS Decor is also an ideal final layer for external thermo-insulated facades. Pallet Color: White and 305 selected (NCS pallet). 25 kg 24 Other colors by order (minimum quantity 150 kg). Recommended thickness: MARMOCRYL Decor 2 mm: 2 mm.Acrylic, ready-to-use, MARMOCRYL Decor 3 mm: 3 mm.colored, water-repellentplaster for rough-textured Consumption: 2final surface Approx. 1,6 kg/m /mm The colors of MARMOCRYL Decor may present small differences from those of FLEXCOAT and ISOMAT-ACRYL because of the plasters texture. PRODUCT/CODE DESCRIPTION - APPLICATION COLOR PACKAG. PS/E.-PAL.MARMOCRYL GRANIT Acrylic, pasty coating with a granite-like finish. G 300 25 kg 240372/6 It is used as a finish coat to create a colored , G 530 water-repellent, coarse-textured finish surface. G 440, G 500 It can be applied on all kinds of building materials such as plaster, concrete, cement G 550 boards, gypsum boards etc. Ideal as a final G 710,G 760,G 820,G 870 coating for the external thermal insulation G 930 composite systems in facades. G 950 Color: 24 selected (MARMOCRYL GRANIT G 660 pallet). G 160, G 980Acrylic, pasty coating Consumption: G 490with a granite-like finish Approximately 1,8 kg/m2/mm. Recommended application thickness: Approx. 2mm. G 510, G 600 G 130,G 150,G 220 71
    • Premixed PlastersAcrylic Plasters PRODUCT/CODE DESCRIPTION - APPLICATION COLOR PACKAG. PS/E.-PAL. MARMOCRYL GRANIT G 380 25 kg 24 0372/6 G 330 G 270 G 1105.3 Silicone Plasters PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/BOX PS/E.-PAL. MARMOCRYL Ready-to-use, white or colored, silicone plaster. Marmocryl White silicone is characterized by its extreme hydrophobia and has 25 kg 24 SILICONE Fine excellent vapor permeability. It is suitable for creating a smooth 0360/6 1 mm surface. Eliminates the need of facade painting. Due to its high 0361/6 1,5 mm NCS elasticity and its excellent bonding to the surface is also an ideal 0362/6 2,0 mm final layer for external thermo-insulated facades. Pallet Color: White and 305 selected (NCS pallet). 25 kg 24 Other colors by order (minimum quantity 150 kg). Recommended thickness: MARMOCRYL SILICONE Fine 1 mm: 1 mm. Ready-to-use, water MARMOCRYL SILICONE Fine 1,5 mm: 1,5 mm. repellent, colored MARMOCRYL SILICONE Fine 2 mm: 2 mm. silicone plaster. Smooth finish Consumption: Approx. 1,8 kg/m2/mm The colors of MARMOCRYL SILICONE Fine may present small differences from those of FLEXCOAT and ISOMAT-ACRYL because of the plasters texture. MARMOCRYL Ready-to-use, white or colored, silicone plaster. Marmocryl White silicone is characterized by its extreme hydrophobia and has 25 kg 24 SILICONE Decor excellent vapor permeability. It is suitable for creating a rough 0364/6 2 mm textured surface. Eliminates the need of facade painting. Due to 0365/6 3 mm its high elasticity and its excellent bonding to the surface is also NCS Pallet an ideal final layer for external thermo-insulated facades. Color: White and 305 selected (NCS pallet). 25 kg 24 Other colors by order (minimum quantity 150 kg). Recommended thickness: MARMOCRYL SILICONE Decor 2 mm: 2 mm. Ready-to-use, water MARMOCRYL SILICONE Decor 3 mm: 3 mm. repellent, colored silicone plaster. Consumption: Approx. 1,6 kg/m2/mm Rough-textured finish The colors of MARMOCRYL SILICONE Decor may present small differences from those of FLEXCOAT and ISOMAT-ACRYL because of the plasters texture.72
    • 5.4 Plaster Primers PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/BOX PS/E.-PAL.PL-PRIMER Concentrated plaster primer-dehydration barrier. It is applied 20 kg 390119/1 upon dilution with water on surfaces that will be subsequently 5 kg 4 72 plastered. It prevents fast absorption of plasters water by the substrate. Suitable for aerated concrete surfaces. Color: Red. Consumption: 40-100 g/m2.Plaster primer -Dehydration barrierPL-BOND Adhesion primer consisting of synthetic resins and quartz sand. 20 kg 240333/1 Used for priming smooth or non-absorptive surfaces, instead of 5 kg 110 spatterdash (rough cast), in order to increase the adhesion of the subsequent plaster. Ideal substrate for gypsum plasters. Suitable for indoor and outdoor use. Consumption:Plaster adhesion 300-350 g/m2, depending on layer thickness.primerFLEX-PRIMER Highly penetrative, polymer aqueous emulsion. Used in 20 kg 390224/6 combination with the highly elastic waterproofing paint 10 kg 44 FLEXCOAT, it forms an ideal system for the waterproofing of 5 kg 4 72 walls. It is also the ideal primer for the acrylic pasty plaster 1 kg 12 324 MARMOCRYL.Color: White. Coverage: 5-10 m2/kg. The package of 10kg is available in round, plastic container thatHigh quality acrylic is useful for preparing colored primer. A colored primer iswater-based primer necessary when the substrates will be covered with acrylic plasters of base D & TR.UNI-PRIMER Ready-to-use acrylic water-based primer. Stabilizes weak, 20 kg 390209/1 loose or crumbling plasters. 5 kg 4 72 Color: White. 1 kg 12 324 Consumption: 100-200 g/m2.Acrylic water-basedprimerSILICONE-PRIMER Silicone polymer aqueous emulsion which stabilizes porous 20 kg 390359/6 substrates and ensures the proper adhesion of silicone plasters 10 kg 44 MARMOCRYL SILICONE. 5 kg 4 72 Color: White. Coverage: 5-10 m2/kg. The package of 10kg is available in round, plastic container that is useful for preparing colored primer. A colored primer isAdhesion primer for necessary when the substrates will be covered with siliconesilicone plasters plasters of base D & TR. 73
    • Premixed Plasters5.5 Plastering Reinforcement Materials PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/BOX PS/PAL. FIBERGLASS MESH High-strength fibreglass mesh for reinforcing plasters or Roll cement mortars that are subject to cracking. FOR PLASTER Blue color, 90 g/m2. 0,25m x 50m 16 1207/1 Mesh: 10,0 mm x 10,0 mm. (12,5 m2) Blue color, 90 g/m2. 1m x 50m 30 Mesh: 10,0 mm x 10,0 mm. (50 m2) Blue color, 120 g/m2. 1m x 50m 30 Mesh: 10,0 mm x 10,0 mm. (50 m2) White color, 90 g/m2. 1m x 50m 30 Mesh: 5,0 mm x 5,0 mm. (50 m2) White color, 145 g/m2. 1m x 50m 30 2 Mesh: 5,0 mm x 5,0 mm. Ideal for facade thermo-insulation works. (50 m ) White color, 160 g/m2. 1m x 50m 30 2 Mesh: 4,0 mm x 4,0 mm. Ideal for facade thermo-insulation works. (50 m ) FIBERGLASS TAPE Self-sticking fibreglass tape for reinforcing gypsum boards, Roll cement sheets etc. Also used for bridging cracks in other 90 m 24 1207/1 repairing works. Tape’s width: 5 cm. Roll 20 m 100 Self-sticking fibreglass tape74
    • 6. Industrial Floorings 6.1 Cement-Based Floorings 6.2 Impregnations for Cement-Based Floorings 6.3 Epoxy-Cement Based Floorings 6.4 Epoxy-Based & Polyurethane-Based Floorings 75
    • 6. Industrial Floorings6.1 Cement-Based Floorings PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/BOX PS/E.-PAL. EXTRA-TOP Surface hardener for cement-based floors with quartz Grey 0327/1 aggregates and special admixtures. Suitable for industrial floors, 25 kg 54 basements, auto repair shops, machine shops, parking lots, Ochre warehouses, loading-unloading areas etc. 25 kg 54 Color: Grey, ochre, redbrown, light blue. Redbrown Consumption: 25 kg 54 3-5 kg/m2. Light Blue Surface hardener for 25 kg 54 cement-based floors EXTRA-TOP CR Hardening agent for industrial floors with corundum, quartz 25 kg 54 0327/1 aggregates and special admixtures. Suitable for floors with high demands in mechanical strength such as industrial floor, basements, auto repair shops, machine shops, parking lots, warehouses, loading-unloading areas, isles etc. Color: Grey. Consumption: Hardening agent for 3-5 kg/m2. industrial floors with corundum FLOWCRET 1-10 Self-leveling, polymer-modified cementitious screed, for 25 kg 54 0307/1 smoothing and leveling concrete or mortar floors, before laying finishing materials like carpet, parquet layers, tiles etc. Applied at a thickness of 1-10 mm per layer. Color: Grey. Consumption: Approx. 1,65 kg/m2/mm. Self-leveling, polymer- modified cementitious screed FLOWCRET 1-10 Fast-setting, self leveling, polymer-modified cementitious Grey 0307/1 EXPRESS screed, used for smoothing and leveling concrete or 25 kg 54 mortar floors, before laying finishing materials like ceramic tiles, carpets, parquet, vinyl tiles etc. It can be used in a thickness of 1-10mm. Ideal for quick repairs, as it can be White walkable after 3 hours. Also, it can be covered after 24 hours. 25 kg 54 Color: Grey, White. Fast-setting, self-leveling, Consumption: polymer-modified cementi- Approx. 1,65 kg /m2 /mm of layer thickness. tious screed FLOWCRET 3-30 Fast-setting, self-leveling, polymer-modified compound, used 25 kg 54 0307/1 EXPRESS for the smoothing and leveling of surfaces. It can be applied at a thickness of 3-30mm. Ideal before installing floor coverings such as tiles, carpet, plastic or wooden floor, marbles, natural stones etc. Suitable also for floors with underfloor heating. Color: Grey Fast-setting, self-leveling Consumption: 2 Approx. 1,65 kg/m /mm of layer thickness. compound76
    • Cement-Based Floorings PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/BOX PS/E.-PAL.DUROCRET-DECO Polymer-modified, fiber-reinforced, cement mortar. It provides 25 kg 540310/1 excellent adhesion to the substrate, waterproofing and abrasion White NEW resistance. For indoor and outdoor use in a variety of Grey applications, on floors and walls, wherever aesthetic Light Grey intervention is needed (e.g. Cycladic architecture) in homes, shops, hotels etc. Suitable for special structures such as built-in Light Ochre beds, built sanitary ware (sinks, bathtubs, showers etc.) Mocha Colors: white, grey, light grey, mocha, crocus, light ochre. CrocusCement screed forsurface finishing on Consumption: Approx. 1,5 kg/m2/mm.floors and wallsSCREED-100 Cementitious screed for filling and leveling floors to be covered 25 kg 540328/6 with tiles, marble, parquet etc., as well as for forming slopes on terraces. It replaces non-reinforced concrete or gas-concrete. Applied at a thickness of up to 10 cm per layer. Color: Grey. Consumption: Approx. 14 kg/m2/cm.Floor leveling cementiousscreedSCREED-SX Rapid setting, reinforced mortar that replaces the cement 20 kg 540328/6 (binder) of floor screeds. It consists of special cements and special additives. After mixing with sand and water it is prepared a rapid setting cement mortar with high strength. Suitable for filling and leveling of floors, before laying tiles, marbles, natural stones, parquet, vinyl tiles, floors with underfloor heating system etc. Also for preparing cement mortar grade for terraces and outdoor areas.Rapid setting mortar- Color: Grey.binder for the preparation Consumption: Approx. 2,0-3,5 kg/m2/cm.of floor screeds6.2 Impregnations for Cement-Based Floorings PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/BOX PS/E.-PAL.ISOMAT BI-100 Water-based polymer emulsion with high penetration ability. 20 kg 390224/1 When applied on concrete floors or cement screeds, it hardens 5 kg 4 72 and dustproofs the surface. Suitable for indoor and outdoor use. 1 kg 12 324 Color: White (transparent after drying) Consumption: 100-200 g/m2, depending on the substrates absorption.Concrete hardening anddustproofingimpregnation 77
    • Industrial FlooringsImpregnations for Cement-Based Floorings PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/BOX PS/E.-PAL. DUROFLOOR-BI Two-component, colorless, solvent-based epoxy resin. Used as 10 kg 48 0403/2 an impregnation on cement-based substrates to provide higher (A+B) (A+B) stability and abrasion resistance. Prevents dust creation on floor surface. Also, used as a primer for EPOXYCOAT-VSF, EPOXYCOAT and EPOXYCOAT-S. 4 kg 105 (A+B) (A+B) Consumption: Two-component, 150-250 g/m2/layer. colorless epoxy impregnation6.3 Epoxy-Cement Based Floorings PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/BOX PS/E.-PAL. DUROFLOOR-CMT Three-component, epoxy-cement, self-leveling flooring, solvent- 25 kg 0422/2 free. It is used for repairing and levelling of cement-based floors (A+B+C) NEW that are going to be covered with DUROFLOOR epoxy systems, polyurethane coatings, plastic flooring, wooden flooring etc. It is also applied in cases where the floor is relatively fresh or is stressed by rising damp in order to create the proper substrate for the application of epoxy layer, to avoid problems of detachment. Color (A+B+C): Grey. Three-component, self-leveling Consumption: Approx. 2,1 kg/m2/mm. epoxy-cement flooring6.4 Epoxy-Based & Polyurethane-Based Floorings PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/BOX PS/E.-PAL. DUROFLOOR Two-component, solvent-free, self-leveling epoxy flooring. After 9 kg 39 0401/2 mixing the two components, Q35 quartz sand is added inside in (A+B) (A+B) proportions DUROFLOOR : quartz sand = 1:2 by weight. Color: RAL 7032 (sand grey), RAL 7035 (light grey), RAL 7040 Other (grey), RAL 3009 (redbrown), RAL 1015 (beige), RAL 1013 (white-beige), RAL 6021 (light green), RAL 5024 (pastel blue). colors Other RAL colors by order (minimum quantity 144 kg). 9 kg 39 Consumption: (A+B) (A+B) Two-component, self- DUROFLOOR: 0,6 kg/m2/mm. leveling epoxy flooring Quartz sand: 1,2 kg/m2/mm (mix. ratio:DUROFLOOR:sand=1:2). DUROFLOOR 11 Two-component, solvent-free epoxy flooring. With the addition of 250 kg 0400/2 quartz sand M32 in proportions 1:1 by weight, it can be used (A+B) as a self-leveling epoxy flooring. Also, without adding quartz 16 kg 39 sand, it can be applied as a brushable epoxy coating. Color: (A+B) (A+B) RAL 7032 (sand grey), RAL 7040 (grey). Other RAL colors by order (minimum quantity 160 kg). Consumption: Other As a self-leveling epoxy flooring: 0,85 kg/m2/mm. colors Two-component epoxy Consumption of quartz sand: 0,85 kg/m2/mm. 16 kg 39 flooring As a brushable epoxy coating: 250-300 g/m2/layer. (A+B) (A+B)78
    • Epoxy-Based & Polyurethane Floorings PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/BOX PS/E.-PAL.DUROFLOOR-R Two-component, solvent-free brushable epoxy coating, suitable 275 kg0404/2 for concrete or cement mortar surfaces. (A+B) Color: RAL 7032 (sand grey), RAL 7035 (light grey), RAL 10 kg 39 7040 (grey), RAL 3009 (redbrown), RAL 1015 (beige), RAL 1013 (white-beige), RAL 6021 (light green), RAL 5024 (pastel (A+B) (A+B) blue). Other RAL colors by order (minimum quantity 150 kg). Other Consumption: colorsTwo-component, 250-300 g/m2/layer. 10 kg 39brushable epoxy coating (A+B) (A+B)DUROFLOOR-PU Two-component, colored, polyurethane coating without 10 kg 390431/2 solvents, with excellent resistance to UV radiation. (A+B) (A+B) DUROFLOOR-PU is used as a coating on concrete floors, cement screeds, etc. Color: RAL 7040 (grey). Other RAL colors by order (minimum quantity 150 kg). Consumption: 250-300 g/m2/layer.Two-component,brushable polyurethanecoatingDUROFLOOR-BI Two-component, colorless, solvent-based epoxy resin. Used as 10 kg 480403/2 an impregnation on cement-based substrates to provide higher (A+B) (A+B) stability and abrasion resistance. Prevents dust creation on floor surface. Also, used as a primer for EPOXYCOAT-VSF, EPOXYCOAT and EPOXYCOAT-S. 4 kg 105 (A+B) (A+B) Consumption:Two-component, 150-250 g/m2/layer.colorless epoxyimpregnationDUROFLOOR-C Two-component, solvent-free, self-leveling, conductible epoxy 10 kg 390409/2 flooring, used to eliminate static electricity problems. (A+B) (A+B) Color: RAL 7040 (grey), RAL 1015 (beige). Other RAL colors by order (minimum quantity 150 kg). Other Consumption: colors Approx. 1,5 kg/m2/mm. 10 kg 39 (A+B) (A+B)Two-component, self-leveling, conductibleepoxy flooringDUROFLOOR-CV Two-component, conductible epoxy varnish. To be used before 8 kg 390410/2 DUROFLOOR-C. (A+B) (A+B) Color: Black. Consumption: Approx. 200 g/m2.Two-component,conductibleepoxy varnish 79
    • Industrial FlooringsEpoxy-Based & Polyurethane Floorings PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/BOX PS/E.-PAL. DUROFLOOR-PSF Transparent, two-component, solvent-free epoxy primer. It is 280 kg 0419/2 used as a primer on surfaces that will be subsequently coated (A+B) with epoxy flooring systems, as a binder for preparing epoxy 10 kg 39 mortars with the addition of quartz sand and also for sealing (A+B) (A+B) cementitious floors at industrial areas and warehouses. Color: Light yellow. 5 kg 6(A) 48 Consumption: (A+B) 12(B) (A+B) Two-component, solvent-free epoxy 200-300 g/m2. primer DUROPRIMER-PSF Two-component, solvent-free epoxy primer. It is used as a 10 kg 39 0402/2 primer on surfaces which will be subsequently coated with (A+B) (A+B) epoxy flooring systems and also as a binder for preparing epoxy mortars with addition of quartz sand. Color: Light yellow. Consumption: Two-component, 200-300 g/m2. solvent-free epoxy primer DUROPRIMER Two-component, colorless, solvent-based epoxy primer. It is 200 kg 0402/2 used on substrates to be coated with epoxy layers of the (A+B) DUROFLOOR system. 9 kg 48 Consumption: (A+B) (A+B) 200-300 g/m2. 3 kg 105 (A+B) (A+B) Two-component epoxy primer EPOXYPRIMER-W Two-component, water-based epoxy primer. It is used as a 10 kg 39 0402/2 primer for cement-based substrates, e.g. concrete or (A+B) (A+B) cement-screeds, which will be covered with epoxy layers of DUROFLOOR system. It can also be used as a primer of ISOFLEX-PU when applied over non-absorptive substrates or over old waterproofing layers. Color: Light yellow. Two-component, water- Consumption: based epoxy primer 200-300 g/m2. DUROPRIMER-W Three-component, water-based epoxy primer. It is used for 21 kg 11 0423/2 priming wet or fresh (age < 28 days) concrete floors that will be (A+B+C) (A+B+C) subsequently covered with epoxy layers of the DUROFLOOR system. Color: Dark yellow. Consumption: 250-300 g/m2/layer. Three-component, water-based epoxy primer80
    • Epoxy-Based & Polyurethane Floorings PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/BOX PS/E.-PAL.DUROPRIMER-SG Two-component, solvent-free epoxy system. It is used as a 10 kg 390402/2 primer for oil contaminated, but cleaned concrete surfaces (A+B) (A+B) and for the priming of still damp concrete or screed surfaces which will be covered with epoxy layers of DUROFLOOR system. Color: Light beige. Consumption:Epoxy primer for 600-1000 g/m2.oil contaminated concretefloors and vapour barrier 81
    • Industrial Floorings82
    • APPENDIX! Tools & Accessories! Product Index 83
    • Tools & Accessories PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. WIDTH PS/E.-PAL. CROSS TILE For setting uniform joints, while fixing ceramic tiles. bag/box Packaging: 500 pieces/bag. SPACERS 80 1 mm 1374/6 80 2 mm 40 3 mm 30 4 mm 18 5 mm 14 7 mm 5 10 mm T-SHAPED TILE For setting uniform joints, while fixing ceramic tiles. bag/box SPACERS Packaging: 500 pieces/bag. 60 3 mm 1399/6 30 5 mm 24 7 mm CROSS For setting uniform joints, while fixing glass-blocks. bag/box Packaging: 50 pieces/bag. 6 GLASS-BLOCK SPACERS 1374/6 WEDGES For fixing ceramic tiles. bag/box 1364/6 Packaging: 500 pieces/bag. 100 TROWEL For the application of DUROFLOOR self-leveling epoxy floor. NOTCHED 1311/6 FLOOR FINISH Adjustable floor finish scraper for the application of DUROFLOOR self-leveling epoxy floor. SCRAPER 1329/6 THIXOTROPIC Additive of epoxy layers which increases thixotropy and 1,5 kg decreases fluidity on vertical or sloped surfaces. AGENT 1398/6 SPIKED ROLLER Used on the fresh layer of DUROFLOOR self-leveling epoxy floor 1318/6 immediate after application with the notched trowel, permitting the trapped air to escape and homogenizing the mixture. · 12 mm spikes. SPIKED SHOES Special shoes with spikes used during the application of 1319/6 DUROFLOOR self-leveling epoxy floor.84
    • Tools & Accessories PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. WIDTH PS/E.-PAL.Q35 QUARTZ SAND Quartz sand of special granulometry for manufacturing flooring Bag1370/6 layers with DUROFLOOR. 18 kg 54M32 QUARTZ SAND Quartz sand of special granulometry for manufacturing flooring Bag4061/6 layers with DUROFLOOR 11. 25 kg 53COPPER TAPE Used during application of DUROFLOOR-C conductible epoxy Roll floor. 20 mSELF-ADHESIVE1324/6SPECIAL GUN For mastic cartridges 310 ml.FOR CARTRIDGES1301/6 For mastic sausages 600 ml.EPOXY RESIN Device for the application of injectable epoxy resins.INJECTION POT1308/6METALLIC TROWEL For final surface treatment of plasters.1360/6SPONGE TROWEL For MARMOCRET Fine final surface treatment.1361/6HARD SPONGE Hard sponge for smoothing and emulsifying of MULTIFILL- 101331/6 EPOXY tile gout. Dimensions: 165 x 110 x 50 mm.HARD SPONGE Hard sponge with handle for smoothing and emulsifying of 4WITH HANDLE MULTIFILL-EPOXY tile grout.1332/6 Dimensions: 15 x 30 cm. Spare hard sponge. 10SOFT SPONGE Soft sponge with handle for the final cleaning of MULTIFILL- 4WITH HANDLE EPOXY tile grout.1333/6 Dimensions: 15 x 30 cm. Spare soft sponge. 10 85
    • Product Index PRODUCT PAGE PRODUCT PAGE PRODUCT PAGE ADIFLEX-B 25 DELTA-NP-DRAIN 18 EPOXYCOAT-AC 57 ADINOL-DM 25 DELTA SCREWS 19 EPOXYCOAT-S 57 ADINOL-RAPID 24 DELTA TERMINATION BARS 18 EPOXYCOAT-VSF 57 ADINOL-RAPID 2H 24 DELTA-VENT N 16 EPOXYCOAT-W 57 ADIPLAST 26 DELTA-VENT S 16 EPOXYPRIMER-W 80 ADIUM 110 22 DELTA WASHERS 19 EPOXY RESIN INJECTION POT 85 ADIUM 130 23 DOMOLIT 25, 50 EXTRA-TOP 76 ADIUM 132 23 DOMOLIT-TR 25 EXTRA-TOP CR 76 ADIUM 145 23 DOMOSIL 13, 62 FAST-COVER 52 ADIUM 150 23 DOMOSIL-MICRO 14, 62 FD-CLEAN 60 AQUAFIX 5 DOMOSIL-POOL 14, 62 FERROSEAL 44 AQUAMAT 4 DOMOSIL-S 14, 62 FERROSEAL-MCI 44 AQUAMAT-ADMIX 5 DRAGOFOL 16 FIBERGLASS MESH FOR PLASTER 74 AQUAMAT-ELASTIC 4, 7 DS-99 26 FIBERGLASS MESH FOR WATERPR. 11 AQUAMAT-F 11 DUREBOND 47 FIBERGLASS TAPE 74 AQUAMAT-FLEX 4, 7 DUROCRET 44 FLEXCOAT 9, 54 AQUAMAT-MONOFLEX 4, 7 DUROCRET-DECO 44, 77 FLEX-COVER 51 AQUAMAT-PENETRATE 4 DUROCRET-FAST 44 FLEX MS-45 15, 64 ASOLIT-POWDER 25, 50 DUROCRET-PENETRATE 45 FLEX-PRIMER 9,55,73 ASPHALTOS 65 DUROFLOOR 78 FLEX PU-20 14, 63 BEVETOL-RD 22 DUROFLOOR 11 78 FLEX PU-2K 15, 63 BEVETOL-SPL 22 DUROFLOOR-BI 57,78,79 FLEX PU-30S 15, 63 BEVETOL-VZ 23 DUROFLOOR-C 79 FLEX PU-40 14, 63 CEMENT HIGH-STRENGTH 52 DUROFLOOR-CMT 78 FLEX PU-50S 15, 63 CL-CLEAN 60 DUROFLOOR-CV 79 FLOOR FINISH SCRAPER 84 CL-EPOXY FLOOR 61 DUROFLOOR-PSF 80 FLOWCRET 1-10 76 CL-GROUT 61 DUROFLOOR-PU 79 FLOWCRET 1-10 EXPRESS 76 CL-INDUSTRY 61 DUROFLOOR-R 79 FLOWCRET 3-30 EXPRESS 76 CL-MARBLE 61 DUROPRIMER 80 GB-COVER 52 CL-MOLD 54, 60 DUROPRIMER-PSF 80 HARD SPONGE 85 CL-UNIVERSAL 61 DUROPRIMER-SG 5, 81 HARD SPONGE WITH HANDLE 85 COPPER TAPE SELF-ADHESIVE 85 DUROPRIMER-W 80 ISOCURE 27 CROSS TILE SPACERS 84 ELASTOTAN 13, 64 ISOCURE-A 27 CROSS GLASS-BLOCK SPACERS 84 EPOMAX-ANCHOR 47 ISODIEN 4 PF ALU 8 DELTA-FLORAXX 18 EPOMAX-EK 46 ISOFLEX 6 DELTA-FLORAXX TOP 18 EPOMAX-L10 47 ISOFLEX-PU 6 DELTA-FOL LP 17 EPOMAX-L20 47 ISOFLEX-T25 6 DELTA-FOL PVE 16 EPOMAX-LD 48 ISOGUM 3V 8 DELTA-FOL PVG 16 EPOMAX-PL 48 ISOGUM P 7 DELTA-MS 18 EPOMAX-STUCCO 46 ISOLAC AQUA-GLOSS 56 DELTA-NB 17 EPOXYCOAT 56 ISOLAC AQUA-PRIMER 5686
    • Product Index PRODUCT PAGE PRODUCT PAGE PRODUCT PAGEISOLAC AQUA-SATIN 56 ISOMAT GLITTER 38 MONTAGE-S 41ISOLAC-BT 8 ISOMAT MT-200 40 MONTAGE-W 41ISOMAC 8, 65 ISOMAT MT-80 49, 70 MULTIFILL 34ISOMASTIC-A 62 ISOMAT MT-80 S 49, 70 MULTIFILL-ELASTIC 38ISOMAT-ACRYL 54 ISOMAT PROFESSIONAL ACRYL 55 MULTIFILL-EPOXY FLOW 38ISOMAT-CLASSIC 53 ISOMAT PROFESSIONAL CLASSIC 53 MULTIFILL-EPOXY GLITTER 38ISOMAT AG 77 59 ISOMAT PU-FOAM 64 MULTIFILL-EPOXY THIXO 38ISOMAT AK 9 30 ISOMAT PU FOAM PROFESSIONAL 64 MULTIFILL MARBLE 0-3 37ISOMAT AK 10 30 ISOMAT SILICONE 54 MULTIFILL RAPID 1-8 35ISOMAT AK 11 30 ISOMAT SL 17 11 MULTIFILL SMALTO 1-8 36ISOMAT AK 12 30 ISOMAT ST-1 70 MULTIFILL STONE 37ISOMAT AK 20 30 ISOMAT HYDROCHROMA 53 MULTIFLEX 33ISOMAT AK 22 31 ISOPAST 8 NANO-SEAL 9ISOMAT AK 25 31 ISOPAST-RUBBER 9 NANOPRO-C 10, 58ISOMAT AK 50 33 ISO-PRIMER 6 NANOPRO-L 10, 59ISOMAT AK-BLOCK 40 JOINT-FILLER 52 NANOPRO-M 10, 59ISOMAT AK-ECOLIGHT 31 LATEX 26 NOZZLES 47ISOMAT AK-ELASTIC 32 M32 QUARTZ SAND 85 PLANFIX 51ISOMAT AK-EPOXY FAST 41 MARMOCRET 1 68 PLANFIX-FINE 51ISOMAT AK-EPOXY NORMAL 41 MARMOCRET-BASE 68 PLANFIX-FINE PROFESSIONAL 51ISOMAT AK-FIRE 40 MARMOCRET-BOND 68 PLASTIPROOF 5, 22ISOMAT AK-FLUX 33 MARMOCRET Decor 68 PL-BOND 73ISOMAT AK-GLASS 40 MARMOCRET Decor PLUS 69 PL-PRIMER 73ISOMAT AK-GRAND 32 MARMOCRET Fine 68 PLASTIC SLEEVE 48ISOMAT AK-LIGHT 31 MARMOCRET Fine PLUS 69 POLYPROPYLENE FIBERS 27ISOMAT AK-MARBLE 32 MARMOCRET GRAFFIATO 69 PRIMER ACRYL 55ISOMAT AK-MEGARAPID 31 MARMOCRET-S 69 PRIMER ACRYL-S 55ISOMAT AK-PARQUET 41 MARMOCRET-SP 69 PRIMER CLASSIC 53ISOMAT AK-PRIMER 33 MARMOCRYL Decor 71 PRIMER PU 6ISOMAT AK-RAPID 32 MARMOCRYL Fine 71 PS-20 10, 58ISOMAT AK-STONE 32 MARMOCRYL GRANIT 71 PS-21 10, 58ISOMAT AK-T33 39 MARMOCRYL SILICONE Decor 72 Q35 QUARTZ SAND 85ISOMAT AK-T35 39 MARMOCRYL SILICONE Fine 72 RAPICRET 45ISOMAT AK-T55 39 MEGACRET-10 45 REOTOL-SPL 22ISOMAT AK-T65 39 MEGACRET-40 45 RETADOL 24ISOMAT AK-THERMO 39 MEGACRET-40 FAST 45 ROOF-TOP 17ISOMAT AK-THERMO ACRYL 40 MEGAGROUT-100 46 SCREED-100 77ISOMAT BATH & KITCHEN 53 MEGAGROUT-101 46 SCREED-SX 77ISOMAT BI-100 77 MEGAPLATE 49 SILICONE-PRIMER 73ISOMAT BUTYL TAPE 12 MEGAWRAP-200 48 SM-12 60ISOMAT BUTYL TAPE ALU 17 METALLIC TROWEL 85 SM-14 58 87
    • Product Index PRODUCT PAGE PRODUCT PAGE PRODUCT PAGE SM-16 7, 60 STUCCOCRET 50 UNCOUPLING MEMBRANE 42 SM-18 55 STUCCOCRET-PLUS 51 UNICRET 49, 70 SOFT SPONGE WITH HANDLE 85 SUPERBOND-PU 42 UNICRET-FAST 50, 70 SPECIAL GUN FOR CARTRIDGES 85 THIXOTROPIC AGENT 84 UNI-PRIMER 33, 73 SPIKED ROLLER 84 TIXOPHALTE 13, 64 VS-1 59 SPIKED SHOES 84 TREVIRA 11 WATERPROOFING & UNCOUPLING MEMBRANE 13, 42 SPLIT-2000 26 TROWEL NOTCHED 84 WATERPROOFING MATERIALS 12 SPONGE TROWEL 85 T-SHAPED TILE SPACERS 84 WATERSTOP 1520 15 WEDGES 84Note:In case of ordering products with special colors that are not listed in the price list, explicit agreement about price anddelivery time is required.
    • Notes
    • ISOMAT. Building qualityISOMAT is the potent, liable company that sets new standards inbuilding. The products of ISOMAT are innovative and offer smartsolutions in new constructions, in renovation and in restorationof damages.They are developed in the Research and DevelopmentDepartment with devotion to quality and emphasis in detail.When reaching the market they should be perfect in everyaspect. They should provide radical solutions, be user-friendly,economic and reliable through time. Our satisfied customersfrom the world of construction, industry and commerce are ourbest reference.Nevertheless, ISOMAT moves further on. With a highly qualifiedstaff of engineers, we provide reliable technical support toeveryone concerned. The consultant of ISOMAT is always closeto you in order to advice you on any building issue. Because ISOMATis interested in your success and in the quality of your construction.
    • ISOMAT S.A. BUILDING CHEMICALS AND MORTARS MAIN OFFICES - FACTORY 17th km Thessaloniki - Ag. Athanasios Road P.O. BOX 1043, 570 03 AG. ATHANASIOS, GREECE Tel.: +30 2310 576 000, Fax: +30 2310 722 475 www.isomat.eu info@isomat.eu05/2012