Your SlideShare is downloading. ×
  • Like
ISOMAT_Plasters & mortars
Upcoming SlideShare
Loading in...5
×

Thanks for flagging this SlideShare!

Oops! An error has occurred.

×

Now you can save presentations on your phone or tablet

Available for both IPhone and Android

Text the download link to your phone

Standard text messaging rates apply

ISOMAT_Plasters & mortars

  • 365 views
Published

 

  • Full Name Full Name Comment goes here.
    Are you sure you want to
    Your message goes here
    Be the first to comment
    Be the first to like this
No Downloads

Views

Total Views
365
On SlideShare
0
From Embeds
0
Number of Embeds
0

Actions

Shares
Downloads
10
Comments
0
Likes
0

Embeds 0

No embeds

Report content

Flagged as inappropriate Flag as inappropriate
Flag as inappropriate

Select your reason for flagging this presentation as inappropriate.

Cancel
    No notes for slide

Transcript

  • 1. I gain durability & style eu PREMIXED PLASTERS & SPECIAL MORTARS
  • 2. MARMOCRET Cement-based plaster Water-repellent · White PREMIXED PLASTERS PROPERTIES - FIELDS OF APPLICATION MARMOCRET is used as the finishing coat of plastering works, to create a white, water-repellent final smooth surface. It requires only the addition of water. It usually replaces the final plaster coat. It is characterized by excelent workability, vapor-permeability and bonding to the substrate. It eliminates the need for facade painting, prevents cracking unlike ordinary cement-lime plasters and allows the building to breathe. It is applied by hand, using a float, or a trowel, or with a plastering machine. Suitable for indoor and outdoor application. It is classified as type GP CS IΙ, W1 mortar according to ΕΝ 998-1. It is supplied in two types: MARMOCRET FINE for the creation of a final smooth surface and MARMOCRET DECOR for the creation of a final coarse-textured surface. PAGKAGING It is avalable in paper bags of 25 kg in white color. Available in other colors on request only (minimum quantity of order 6000 kg). MARMOCRET FINE MARMOCRET DECOR Smooth finish Coarse-textured finish MARMOCRET FINE has a fine-grained aggregate (up to 1.3 mm) for the creation of a final smooth surface. MARMOCRET DECOR has a coarse aggregate (up to 3 mm) for the creation of a coarse-textured final surface. CONSUMPTION CONSUMPTION 2 Approx. 1.40 kg/m /mm. Recommended thickness: 2 - 5 mm. Approx. 1.50 kg/m2/mm. Recommended thickness: 2.5 - 3.5 mm. MARMOCRET GRAFFIATO Polymer-modified, cement-based plaster Extra rough-textured final surface · White · Water-repellent PROPERTIES - FIELDS OF APPLICATION MARMOCRET GRAFFIATO is used to create a white, water-repellent final extra coarse-textured surface on substrates with special demands in elasticity and adhesion. It usually replaces the final coat of plaster. It requires only the addition of water. It is characterized by excelent workability, vapor-permeability and bonding to the substrate. It eliminates the need for facade painting and allows the building to breathe. It is applied by hand, using a float, or a trowel, or with a plastering machine. Suitable for indoor and outdoor application. It is classified as type GP CS IΙI, W1 mortar according to ΕΝ 998-1. In combination with the fibre-reinforced adhesive ISOMAT AK-THERMO it is used as a system for application on thermo-insulation boards. CONSUMPTION Approx. 1.50 kg/m2/mm. Recommended thickness: 3 - 4 mm. PACKAGING Available in paper bags of 25 kg in white color. 1
  • 3. MARMOCRET PLUS Fine PROPERTIES - FIELDS OF APPLICATION MARMOCRET PLUS Fine is a pre-mixed plaster with fine-grained aggregate (up to 1.3 mm), enriched with resins. It requires only the addition of water. It is used to create a white or colored water-repellent final smooth surface on substrates with special demands in elasticity and adhesion. It usually replaces the final coat of plaster. It is characterized by excelent workability, vapor-permeability and bonding to the substrate. It eliminates the need for facade painting, prevents cracking unlike ordinary cement-lime plasters and allows the building to breathe. It is applied by hand, using a float or a trowel, or with a plastering machine. Suitable for indoor and outdoor application. In combination with the fibre-reinforced adhesive ISOMAT AK-THERMO it is used as a system for application on thermo-insulation boards. It is classified as type GP CS IΙ, W2 mortar according to ΕΝ 998-1. Adhesive for thermo-insulation boards Thermo-insulation board Reinforced layer of adhesive for thermo-insulation boards Plastering with MARMOCRET PLUS Fine CONSUMPTION Approx. 1.40 kg/m2/mm. Recommended thickness: 2 - 3 mm. PACKAGING - COLORS It is available in paper bags of 25 kg, in 8 selected colors, as they are indicatively presented at the end of this page. MARMOCRET PLUS Decor Polymer-modified, cement-based plaster Coarse-textured finish · White or colored · Water-repellent PROPERTIES - FIELDS OF APPLICATION MARMOCRET PLUS Decor is a pre-mixed plaster with fine-grained aggregate (up to 3 mm), enriched with resins. It requires only the addition of water. It is used to create a white or colored water-repellent final coarse textured surface on substrates with special demands in elasticity and adhesion. It usually replaces the final coat of plaster. It is characterized by excelent workability, vapor-permeability and bonding to the substrate. It eliminates the need for facade painting, prevents cracking unlike ordinary cement-lime plasters and allows the building to breathe. It is applied by hand, using a float or a trowel, or with a plastering machine. Suitable for indoor and outdoor application. In combination with the fibre-reinforced adhesive ISOMAT AK-THERMO it is used as a system for application on thermo-insulation boards. It is classified as type GP CS IΙ, W2 mortar according to ΕΝ 998-1. PREMIXED PLASTERS Polymer-modified, cement-based plaster Smooth finish · White or colored · Water-repellent Adhesive for thermo-insulation boards Thermo-insulation board Reinforced layer of adhesive for thermo-insulation boards Plastering with MARMOCRET PLUS Decor CONSUMPTION Approx. 1.40 kg/m2/mm. Recommended thickness: 2.5 - 3.5 mm. PACKAGING - COLORS It is available in paper bags of 25 kg, in the following 8 selected colors: White (No 100) Shell (No 207) Soft rose (No 227) Light ochre (No 228) Sand dune (No 230) Corfu (No 308) Amphora (No 325) Sky (No 403) 2
  • 4. MARMOCRYL Fine PREMIXED PLASTERS Acrylic, pasty, ready-to-use plaster Water-repellent · White or colored · Smooth finish PROPERTIES - FIELDS OF APPLICATION MARMOCRYL Fine is a ready-to-use, pasty, white or colored, acrylic plaster. It is used as the finishing coat of plastering works, to create a water-repellent smooth finish surface (thin layer). It is characterized by high elasticity, vapor-permeability and excellent bonding to the substrate. It offers total water-repellency acc. to EN1062-3. It eliminates the need for facade painting, prevents cracking unlike ordinary cement-lime plasters and allows the building to breathe. It is also resistant to alkalis according to DIN 18556. It is applied by hand, using a smooth stainless metallic spatula, or with a plastering machine. It can be applied on all kinds of building materials like plaster, concrete, cement or gypsum boards etc., outdoors and indoors. It replaces the final plaster coat. Thanks to its high elasticity and its excellent bonding to the substrate it is also an ideal final layer for external thermo-insulated facades. CONSUMPTION Approx. 1.8 kg/m2/mm. Recommended thickness: MARMOCRYL Fine 1 mm: 1 mm. MARMOCRYL Fine 1.5 mm: 1.5 mm. MARMOCRYL Fine 2 mm: 2 mm. PACKAGING - COLORS It is available in plastic containers of 25 kg, in white and 305 selected colors. MARMOCRYL Decor Acrylic, pasty, ready-to-use plaster Water-repellent · White or colored · Coarse textured finish PROPERTIES - FIELDS OF APPLICATION MARMOCRYL Decor is a ready-to-use, pasty, white or colored, acrylic plaster. It is used as the finishing coat of plastering works, to create a water-repellent coarse textured finish surface. It is characterized by high elasticity, vapor-permeability and excellent bonding to the substrate. It offers total water-repellency acc. to EN1062-3. It eliminates the need for facade painting, prevents cracking unlike ordinary cement-lime plasters and allows the building to breathe. It is also resistant to alkalis according to DIN 18556. It is applied by hand, using a smooth stainless metallic spatula, or with a plastering machine. It can be applied on all kinds of building materials like plaster, concrete, cement or gypsum boards etc., outdoors and indoors. It replaces the final plaster coat. Thanks to its high elasticity and its excellent bonding to the substrate it is also an ideal final layer for external thermo-insulated facades. CONSUMPTION Approx. 1.6 kg/m2/mm. Recommended thickness: MARMOCRYL Decor 2 mm: 2 mm. MARMOCRYL Decor 3 mm: 3 mm. PACKAGING - COLORS It is available in plastic containers of 25 kg, in white and 305 selected colors. MARMOCRYL Decor can create coarse-textured decorative surfaces of different texture according to the way of rubbing. 3 Adhesive for thermo-insulation boards Thermo-insulation board Reinforced layer of adhesive for thermo-insulation boards Plastering with MARMOCRYL Fine/Decor
  • 5. MARMOCRYL SILICONE Fine PROPERTIES - FIELDS OF APPLICATION MARMOCRYL SILICONE Fine is a ready-to-use, pasty, white or colored, silicone plaster. It is used as the finishing coat of plastering works, to create a water-repellent smooth finish surface (thin layer). It is characterized by high elasticity and excellent bonding to the substrate. It offers total water-repellency acc. to EN1062-3. It eliminates the need for facade painting and prevents cracking unlike ordinary cement-lime plasters. It is extremely vapor-permeable allowing this way the building to breathe. It is also resistant to alkalis according to DIN 18556. It is applied by hand, using a smooth stainless metallic spatula, or with a plastering machine. It can be applied on all kinds of building materials like plaster, concrete, cement or gypsum boards etc., outdoors and indoors. It replaces the final plaster coat. Thanks to its high elasticity and its excellent bonding to the substrate it is also an ideal final layer for external thermo-insulated facades. CONSUMPTION Approx. 1.8 kg/m2/mm. Recommended thickness: MARMOCRYL SILICONE Fine 1 mm: 1 mm. MARMOCRYL SILICONE Fine 1.5 mm: 1.5 mm. MARMOCRYL SILICONE Fine 2 mm: 2 mm. PACKAGING - COLORS It is available in plastic containers of 25 kg, in white and 227 selected colors. MARMOCRYL SILICONE Decor Silicone, pasty, ready-to-use plaster Water-repellent · Vapor-permeable · Coarse textured finish PREMIXED PLASTERS Silicone, pasty, ready-to-use plaster Water-repellent · Vapor-permeable · Smooth finish PROPERTIES - FIELDS OF APPLICATION MARMOCRYL SILICONE Decor is a ready-to-use, pasty, white or colored, silicone plaster. It is used as the finishing coat of plastering works, to create a water-repellent coarse textured finish surface. It is characterized by high elasticity and excellent bonding to the substrate. It offers total water-repellency acc. to EN1062-3. It eliminates the need for facade painting and prevents cracking unlike ordinary cement-lime plasters. It is extremely vapor-permeable allowing this way the building to breathe. It is also resistant to alkalis according to DIN 18556. It is applied by hand, using a smooth stainless metallic spatula, or with a plastering machine. It can be applied on all kinds of building materials like plaster, concrete, cement or gypsum boards etc., outdoors and indoors. It replaces the final plaster coat. Thanks to its high elasticity and its excellent bonding to the substrate it is also an ideal final layer for external thermo-insulated facades. CONSUMPTION Approx. 1.8 kg/m2/mm. Recommended thickness: MARMOCRYL SILICONE Decor 2 mm: 2 mm. MARMOCRYL SILICONE Decor 3 mm: 3 mm. PACKAGING - COLORS It is available in plastic containers of 25 kg, in white and 227 selected colors. MARMOCRYL SILICONE Decor can create coarse-textured decorative surfaces of different texture according to the way of rubbing. Adhesive for thermo-insulation boards Thermo-insulation board Reinforced layer of adhesive for thermo-insulation boards Plastering with MARMOCRYL SILICONE Fine/Decor 4
  • 6. MARMOCRYL GRANIT Acrylic, pasty coating with a granite-like finish Decorative · Colored · Water-repellent PREMIXED PLASTERS PROPERTIES - FIELDS OF APPLICATION MARMOCRYL Granit is an acrylic, pasty coating with a granite-like finish. It consists of colored aggregates of small particle size, to form a thin decorative final surface. It is used as finishing coat in plastering works (replacing the final plaster coat), to form a colored, water-repellent, coarse-textured surface. It can be applied both outdoors and indoors, such as in entertainment venues, hotels, retail shops etc., and on all kinds of building materials like plaster, concrete, cement or gypsum boards etc. Due to its high elasticity and its excellent bonding to the substrate it is also an ideal final layer for external thermo-insulated facades. CONSUMPTION 1.8 kg/m2/mm. Recommended application thickness: approx. 2 mm. PACKAGING It is supplied in plastic containers of 25 kg in the following 24 color combinations: G_130 G_150 G_160 G_220 G_270 G_300 G_300 G_330 G_380 G_440 G_490 G_500 G_510 G_530 G_550 G_600 G_660 G_710 G_760 G_820 G_870 G_930 G_950 5 G_110 G_980
  • 7. ISOMAT AK-T35 Fibre-reinforced adhesive for thermo-insulation boards CONSUMPTION As adhesive: 3.0 - 4.0 kg/m². As reinforced mortar: approx. 1.5 kg/m²/mm. PACKAGING It is supplied in paper bags of 25 kg in grey and white color. ISOMAT AK-T55 Fibre-reinforced adhesive for thermo-insulation boards PROPERTIES - FIELDS OF APPLICATION Fibre-reinforced cement-based adhesive, enriched with polymers (resins). It is suitable for fixing thermo-insulation boards of extruded or expanded polystyrene, mineral wool, polyurethane, cork, etc. on facades made of concrete, render, or masonry. Moreover, when reinforced with fibreglass mesh and applied on the exterior side of fixed thermo-insulation boards, it constitutes the ideal substrate for the subsequent render layer. It is used in combination with MARMOCRET PLUS and MARMOCRYL renders as a system for creating external thermo-insulated facades. It provides high initial and final adhesive strength, elasticity and resistance to moisture. It is classified as a GP CS IV W2 rendering mortar according to EN 998-1 and as a C2 adhesive according to EN 12004. PREMIXED PLASTERS PROPERTIES - FIELDS OF APPLICATION Fibre-reinforced cement-based adhesive, enriched with polymers (resins). It is suitable for fixing thermal insulation polystyrene boards on the facades of buildings. Moreover, when applied reinforced with fiberglass mesh on fixed thermo-insulation boards, it constitutes the ideal substrate for the subsequent plaster. It is used in combination with the plasters MARMOCRET PLUS and MARMOCRYL, as a system for the external thermal insulation of buildings. It provides high initial and final adhesive strength, elasticity and resistance to moisture. It is qualified as absolutely non-slip adhesive with increased open time. CONSUMPTION As adhesive: 3.0 - 4.0 kg/m². As reinforced mortar: approx. 1.5 kg/m²/mm. PACKAGING It is supplied in paper bags of 25 kg in white color. ISOMAT AK-T65 Αdhesive for mineral wool thermo-insulation boards PROPERTIES - FIELDS OF APPLICATION Cement-based adhesive, enriched with polymers (resins). It is suitable for fixing thermo-insulation boards of mineral wool on facades made of concrete, render, or masonry. Moreover, when reinforced with fibreglass mesh and applied on the exterior side of fixed thermo-insulation boards, it constitutes the ideal substrate for the subsequent render layer. It is used in combination with MARMOCRET PLUS and MARMOCRYL renders as a system for creating external thermo-insulated facades. It provides high initial and final adhesive strength, elasticity and resistance to moisture. It is classified as a GP CS IV W2 rendering mortar according to EN 998-1. CONSUMPTION As adhesive: 3.0 - 4.0 kg/m². As reinforced mortar: approx. 1.5 kg/m²/mm. PACKAGING It is supplied in paper bags of 25 kg in grey color. 6
  • 8. ISOMAT AK-THERMO PREMIXED PLASTERS Fibre-reinforced adhesive for thermo-insulation boards PROPERTIES - FIELDS OF APPLICATION Fibre-reinforced cement-based adhesive, enriched with polymers (resins). It is used in combination with MARMOCRET PLUS and MARMOCRYL renders as a system for creating external thermo-insulated facades. It is suitable for fixing thermo-insulation boards of extruded or expanded polystyrene, mineral wool, polyurethane, cork, etc. on facades made of concrete, render, or masonry. Moreover, when reinforced with fibreglass mesh and applied on the exterior side of fixed thermo-insulation boards, it constitutes the ideal substrate for the subsequent render layer. It provides high initial and final adhesive strength, elasticity and resistance to moisture. It is classified as a GP CS IV W2 rendering mortar according to EN 998-1 and as a C2E adhesive according to EN 12004. CONSUMPTION As adhesive: 2.0 - 4.0 kg/m². As reinforced mortar: approx. 1.5 kg/m²/mm. PACKAGING It is supplied in paper bags of 25 kg in white color. ISOMAT AK-THERMO ACRYL Acrylic reinforcing pasty coating for thermo-insulation boards PROPERTIES - FIELDS OF APPLICATION Ready-to-use, pasty, fibre-reinforced coating, based on acrylic resins. It is used as a reinforcing coating for embedding fiberglass mesh on fixed thermo-insulation boards, constituting the ideal substrate for the subsequent organic plaster layer. Moreover, it is used for fixing any kind of thermo-insulation materials, such as extruded or expanded polystyrene boards, stone wool etc., on the exterior surface of buildings, in combination with the acrylic or silicone acrylic plasters MARMOCRYL and MARMOCRYL-SILICONΕ. It is also ideal for the external thermal insulation of buildings. It provides high initial and final bond strength, high elasticity and resistance to moisture. It accelerates and simplifies the application. Certified with the CE marking according to EN 15824 as a V2, W3 render and according to EN 12004 as a D2E adhesive. CONSUMPTION As adhesive: 2.0 - 5.0 kg/m². As reinforced mortar: approx. 3.0 - 4.0 kg/m²/mm. PACKAGING It is supplied in plastic containers of 25 kg in white color. MARMOCRET-S Mortar-binder for the preparation of white water-repellent plasters PROPERTIES - FIELDS OF APPLICATION Pre-mixed compound that replaces cement and lime (i.e. the binding material) for the preparation of white final coat plasters (skim coats). It is mixed with marble-sand and water and offers total water-repellency, excellent workability and bonding onto the substrate. CONSUMPTION One bag of MARMOCRET-S (15 kg), mixed with 70 kg marble-sand, covers approx. 10 m2 in a thickness of 5 mm. PACKAGING It is supplied in paper bags of 15 kg in white color. 7
  • 9. MARMOCRET-BOND Mortar for bonding spatterdash of plaster PROPERTIES - FIELDS OF APPLICATION Pre-mixed, cement-based mortar, that needs only the addition of water. It is used to create the bonding spatterdash (rough cast) on concrete, masonry, thermo-insulation boards etc. for adhesion enhancement of the plaster that follows. It is characterised by excellent workability and bonding onto the substrate. It simplifies and accelerates the application. It can be applied with a plastering machine or by hand using a trowel. Ideal for outdoor and indoor applications. It is classified as type GP CS IV, W1 mortar according to ΕΝ 998-1. PACKAGING It is supplied in paper bags of 25 kg in grey color. MARMOCRET-BASE Base layer plaster PROPERTIES - FIELDS OF APPLICATION Pre-mixed, cement-based plaster, that needs only the addition of water. It is used to create the “basic layer” of plaster. It constitutes the ideal substrate for the subsequent final coat (finishing coat) of plaster when MARMOCRET or MARMOCRET PLUS premixed, colored, water-repellent finish coat plasters are used. It is characterised by excellent workability and bonding onto the substrate. It simplifies and accelerates the application. It allows the building to breathe. It can be applied with a plastering machine or by hand using a trowel. Ideal for outdoor and indoor applications. It is classified as type GP CS IΙ, W0 mortar according to ΕΝ 998-1. PREMIXED PLASTERS CONSUMPTION Approx. 5 kg/m2. CONSUMPTION Approx. 13.5 kg/m2/cm of plaster thickness. PACKAGING It is supplied in paper bags of 25 kg in grey color. MARMOCRET 1 One layer plaster PROPERTIES - FIELDS OF APPLICATION Pre-mixed one layer plaster (skim coat). Its usage needs only the the addition of water. It replaces the two final layers (basic and finishing coat) of common plastering works, applied on maximum thickness of 3 cm. It is used in plastering works both indoors and outdoors and wherever acceleration of application is needed. It is characterised by excellent workability and bonding onto the substrate. It offers excellent vapor permeability to the construction. Ideal for application with a plastering machine. It is classified as type CS IΙ, W1 mortar according to ΕΝ 998-1. CONSUMPTION Approx. 14 kg/m2/cm of plaster thickness. PACKAGING It is supplied in paper bags of 30 kg in grey and white color. 8
  • 10. MARMOCRET-SP Restoration plaster for salt containing and wet walls PROPERTIES - FIELDS OF APPLICATION Pre-mixed, restoration plaster, particularly durable to salts and moisture. Due to its composition, it allows the renovation and protection of moisture attacked and salt damaged masonries. It is particularly suitable for buildings near the sea or in areas exposed to rising damp. Ideal also for areas with high humidity such as bathrooms, basements, etc. It prevents cracking unlike ordinary cement-lime plasters and offers excellent vapor permeability to the construction. Suitable for both indoor and outdoor applications. It is classified as type R CS IΙ according to ΕΝ 998-1. PREMIXED PLASTERS CONSUMPTION Approx. 10 - 11 kg/m2/cm. Recommended application thickness: minimum 1.5 cm - maximum 3 cm. PACKAGING It is supplied in paper bags of 25 kg in white color. ISOMAT ST-1 Impregnation of salt damaged masonry PROPERTIES - FIELDS OF APPLICATION Impregnation of masonry that inactivates salts. It is used for the restoration of salt damaged masonry, in combination with the renovation plaster MARMOCRET-SP. Thanks to its complexity ISOMAT ST-1 transforms water soluble salts (chlorides and sulphates) into insoluble and in that way prevents the invasion of lightly soluble salts into the wet, not yet hydrophobic restoration plaster. Therefore, the restoration plaster, after drying, provides to the masonry the necessary protection from salts. CONSUMPTION Approx. 0.4 - 0.5 kg/m2 for two treatments. PACKAGING It is supplied in plastic containers of 1 kg, 5 kg and 20 kg. UNICRET Mortar for plastering and masonry PROPERTIES - FIELDS OF APPLICATION Pre-mixed mortar suitable for masonry and plastering applications. It is ideal for general repair works, because of its easy and quick application. It requires only the addition of water. It is characterised by very good workability and bonding onto the substrate. It is certified with the CE marking as a GP CS II W0 mortar according to EN 998-1 and according to EN 998-2. CONSUMPTION Approx. 15.5 kg/m2/cm of layer thickness. PACKAGING It is supplied in paper bags of 25 kg in grey and white color. 9
  • 11. UNICRET-FAST Fast-setting, white repairing mortar PROPERTIES - FIELDS OF APPLICATION Fast-setting, white repairing mortar. Ideal for fast plaster repairs in new and old constructions. It replaces the corresponding use of the gypsum in construction works. Its usage requires only the addition of water. It is characterised by excellent bonding onto the substrate and very good workability. it can be rubbed with a sponge-faced float approx. 45 min after the application. It is certified with the CE marking as a GP CS I W0 mortar according to EN 998-1 and according to EN 998-2. Approx. 14.7 kg/m2/cm of layer thickness. PACKAGING It is supplied in plastic bags of 5 kg and paper bags of 25 kg in white color. ISOMAT MT-80 Pre-mixed, cement-based mortar for masonry PROPERTIES - FIELDS OF APPLICATION Pre-mixed, cement-based mortar that is used for building various types of construction materials, such as bricks, blocks, aerated concrete blocks, stone, etc. Its usage requires only the addition of water. It provides high initial and final adhesive strength and has excellent workability. Thanks to the special particle size granulation of the product, the mortar flows slightly but does not collapse under the weight of the masonry units. It can be applied both indoors and outdoors. It is certified with the CE marking, according to EN 998-2. PREMIXED PLASTERS CONSUMPTION CONSUMPTION Indicative consumption 20 kg/m2 of masonry, for bricks of dimensions 6 x 9 x 12 cm. PACKAGING It is supplied in paper bags of 15 kg and 25 kg in grey color. ISOMAT MT-80 S Pre-mixed, cement-based masonry mortar that prevents the formation of salts PROPERTIES - FIELDS OF APPLICATION Pre-mixed, cement-based mortar for masonry. It is used on various types of construction materials such as bricks, blocks, stone, etc., especially when the masonry will be exposed, as it prevents the formation of salts. Its usage requires only the addition of water. It provides high initial and final adhesive strength and has excellent workability. Thanks to the special particle size granulation of the product, the mortar flows slightly but does not collapse under the weight of the masonry units. It can be applied both indoors and outdoors. It is certified with the CE marking, according to EN 998-2. CONSUMPTION Indicative consumption 20 kg/m2 of masonry, for bricks of dimensions 6 x 9 x 12 cm. PACKAGING It is supplied in paper bags of 25 kg in grey color. 10
  • 12. PL-PRIMER PREMIXED PLASTERS Plaster primer - Dehydration barrier PROPERTIES - FIELDS OF APPLICATION Concentrated liquid primer for plasters, used diluted with water on absorptive surfaces to be plastered, like brick walls, lime stone, aerated or gas concrete etc. It provides hydrophobia to the substrate, eliminating the danger of strength decrease of the plaster because of water loss. Especially for MARMOCRET colored plasters, the use of PL-PRIMER is necessary to achieve uniform color on the whole surface. In this case PL-PRIMER is applied on the substrate of the colored plaster (rendering, concrete etc.). PL-PRIMER does not form a skin, therefore it does not affect the adhesion to the substrate or the vapor permeability of the structure. CONSUMPTION 40 - 100 g/m2, depending on the absorptivity of the substrate. PACKAGING It is supplied in plastic containers of 5 kg and 20 kg. ML-PRIMER Acrylic slurry prime coat, white or colored PROPERTIES - FIELDS OF APPLICATION Water-based, white or colored, acrylic slurry prime coat with very fine aggregates. It improves the substrate's roughness before the application of decorative plasters of all types (cement based, acrylic, silicone, silicate). Furthermore it ensures a uniform color shade of the final surface, especially when a dark colored plaster has been selected. It is used as a ready-to-use primer, to create a coarse surface in order to improve the adhesion of the plaster that will be applied subsequently. It is ideal for smooth surfaces such as concrete, cement or gypsum boards etc. and on the base coat of plaster. It is recommended to be used colored in the same shade with the plaster especially when the plasters MARMOCRYL, MARMOCRYL SILICONE and MARMOCRYL SILICATE will be applied. Suitable for interior and exterior applications. CONSUMPTION 150 - 200 g/m2, depending on the absorptivity of the substrate. PACKAGING It is available in plastic containers of 15 kg. FLEX-PRIMER High quality acrylic water-based primer PROPERTIES - FIELDS OF APPLICATION Ready-to-use acrylic water-based primer, suitable for ensuring the proper adhesion of acrylic plasters (MARMOCRYL), water-based paints, tile-adhesives, flexible mortars, brushable elastomeric coatings etc. on porous substrates made of concrete, masonry, plaster, gypsum boards, chip boards etc. It stabilizes weak or crumbling plasters etc. Suitable for indoor and outdoor applications. CONSUMPTION 100 - 200 g/m2, depending on the absorptivity of the substrate. PACKAGING It is supplied in plastic containers of 1 kg, 5 kg, 10 kg and 20 kg. 11
  • 13. SILICONE-PRIMER Adhesion primer for silicone plasters PROPERTIES - FIELDS OF APPLICATION Silicone polymer emulsion, which stabilizes porous substrates and ensures the proper adhesion of silicone plasters. By penetrating inside the pores of the substrate, it acts as a bonding layer between the substrate and the plaster, to be applied. SILICONE-PRIMER is a ready-to-use primer, applied on porous substrates made of concrete, masonry, plaster, gypsum boards, chip boards etc. It stabilizes weak or crumbling plasters etc. Used in combination with MARMOCRYL SILICONE plasters, it forms an ideal system for the covering and decoration of walls. 100 - 200 g/m2, depending on the absorptivity of the substrate. PACKAGING It is supplied in plastic containers of 1 kg, 5 kg, 10 kg and 20 kg. PL-BOND Plaster adhesion primer PROPERTIES - FIELDS OF APPLICATION Ready-made adhesion primer consisting of synthetic resins and quartz sand. It is used on smooth or non-absorptive surfaces instead of the spatterdash (rough cast) layer to increase the adhesion of the subsequent plaster. After its application it creates a coarse surface, resistant to alkaline environment, to ensure adequate roughness on the substrate, so that the adhesion of the subsequent plaster is reinforced. The resultant surface is highly resistant to alkalis and therefore constitutes an ideal substrate for gypsum plasters. Suitable for indoor and outdoor use. PREMIXED PLASTERS CONSUMPTION CONSUMPTION 300 - 350 g/m2, depending on layer thickness. PACKAGING It is supplied in plastic containers of 5 kg and 20 kg. UNI-PRIMER Acrylic water-based primer PROPERTIES - FIELDS OF APPLICATION Ready-to-use acrylic water-based primer suitable for ensuring the adhesion of water-based paints on porous substrates made of concrete, masonry, plaster, gypsum boards, chip boards etc. It stabilizes weak or crumbling plasters etc. It is also used for stabilizing and reducing the water absorption of surfaces formed by gypsum boards or chip boards, on which tile-adhesives, AQUAMAT-ELASTIC (2-component, elastic sealing slurry) or ISOMAT SL 17 (brushable, elastomeric liquid membrane for waterproofing under tiles), are going to be subsequently applied. It is suitable for indoor and outdoor applications. CONSUMPTION 100 - 200 g/m2, depending on the absorptivity of the substrate. PACKAGING It is supplied in plastic containers of 1 kg, 5 kg and 20 kg. 12
  • 14. FERROSEAL Cement-based anticorrosive coating for reinforcement elements - Bonding agent PROPERTIES - FIELDS OF APPLICATION Ready-to-use cement mortar, for the protection of steel reinforcement elements from corrosion and acting as a bonding layer between old and new mortar or concrete in repair works. Its usage requires only the addition of water. It is classified as a product for reinforcement corrosion protection according to EN 1504-7. REPAIRING MATERIALS CONSUMPTION As anticorrosive protection of reinforcement elements: 0.07 - 0.13 kg per running meter of reinforcement element. As bonding layer: approx. 2 kg/m2. PACKAGING It is supplied in buckets of 1 kg, 5 kg and 20 kg. DUROCRET Polymer-modified, repairing cement mortar PROPERTIES - FIELDS OF APPLICATION Pre-mixed, polymer-modified, cement-based mortar, without corrosive ingredients, suitable for indoor and outdoor applications. It is used for concrete or brickwork repair and patching, groove formation etc. A version in redbrown color is suitable for works on tile roofs (ridgepoles). DUROCRET is applied in a thickness of up to 2 cm for large scale applications and of up to 5 cm for localized repairs. It is characterized by excellent bonding onto the substrate, water impermeability and abrasion resistance. Its usage requires only the addition of water. It is classified as a PCC R2 type mortar, for concrete repairs, according to EN 1504-3. CONSUMPTION Approx. 15 kg/m2/cm of layer thickness. PACKAGING It is supplied in plastic bags of 5 kg and paper bags of 25 kg in grey, white and red-brown color. DUROCRET-FAST Fast-setting, repairing cement mortar PROPERTIES - FIELDS OF APPLICATION Fast-setting, fibre-reinforced cementitious repairing mortar, enriched with polymers, without corrosion ingredients, for internal and external applications. Suitable for repairs on concrete, cement mortars, masonry, plasters and generally wherever high strength and fast application is necessary. DUROCRET-FAST is applied in a thickness of up to 3 cm for large scale applications and of up to 5 cm for localized repairs. It is characterised by excellent bonding onto the substrate and abrasion resistance. Its usage requires only the addition of water. It is classified as type PCC R2, repairing cement mortar for concrete, according to EN 1504-3. CONSUMPTION Approx. 17 kg/m2/cm of layer thickness. PACKAGING It is supplied in paper bags of 25 kg in grey color. 13
  • 15. DUROCRET-DECO Cement screed for surface finishing on floors and walls CONSUMPTION Approx. 1.5 kg/m2/cm of layer thickness. PACKAGING It is supplied in paper bags of 25 kg in white, grey, light grey, light ochre, mocca and crocus color. DUROCRET-PENETRATE Repairing and waterproofing cement mortar with crystallizing effect PROPERTIES - FIELDS OF APPLICATION Pre-mixed, cement-based mortar, suitable for indoor and outdoor applications. It combines two actions in one product, repair and waterproofing, as its special active chemicals, when in contact with moisture and the present hydroxide of lime, react and form insoluble bonds (crystals). These crystals block the capillary pores and seal the shrinkage cracks inside the concrete, so as to prevent any further water absorption. It is characterised by excellent bonding onto the substrate and abrasion resistance, as well as high compressive and flexural strength. It has excellent bond strength to concrete, under both positive and negative water pressure and protects the construction from corrosion of the reinforcement steel of concrete. It is classified as a CC R2 type mortar, for concrete repairs, according to EN 1504-3. REPAIRING MATERIALS PROPERTIES - FIELDS OF APPLICATION Pre-mixed, polymer-modified, fibre-reinforced, cement-based mortar, without corrosive ingredients, suitable for indoor and outdoor applications. It is used as a cement screed finish over cement based substrates, stairs, floors, walls and also for special constructions such as built-in sanitary articles (washbasins, showers etc.). It can be applied in houses, hotels or wherever an aesthetic intervention is needed. It is characterized by excellent bonding onto the substrate, water impermeability and abrasion resistance. Its usage requires only the addition of water. It is classified as a PCC R2 type mortar, for concrete repairs, according to EN 1504-3. CONSUMPTION Approx. 17 kg/m2/cm of layer thickness. PACKAGING It is supplied in paper bags of 25 kg in grey color. RAPICRET Fast-setting patching mortar PROPERTIES - FIELDS OF APPLICATION Pre-mixed, cement-based, fast-setting repairing mortar, suitable for quick repair of concrete elements, fixing, anchoring, patching of cavities or holes, groove formation etc. and generally wherever high strength and fast application is necessary. RAPICRET may be applied on floors, walls or ceilings. It is characterised by superior workability, excellent bonding onto the substrate and reduced water impermeability. It has short working time of about 15 min. at +20°C. It is classified as a PCC R3 type mortar, for concrete repairs, according to EN 1504-3. CONSUMPTION Approx. 17.5 kg/m2/cm of layer thickness. PACKAGING It is supplied in plastic bags of 5 kg and paper bags of 25 kg in grey color. 14
  • 16. MEGACRET-40 High-strength, fibre-reinforced repairing cement mortar PROPERTIES - FIELDS OF APPLICATION High-strength, fibre-reinforced cementitious repairing mortar. Suitable for demanding repairs to concrete elements. It is applied with a trowel or by gunite machine on floors, walls, or ceilings at the desired thickness, up to 4 cm per layer. It is characterised by superior strength,very good bonding onto the substrate, excellent workability, reduced water permeability and volume stability. Its usage requires only the addition of water. It is classified as a CC R4 mortar for concrete repairs, according to EN 1504-3. REPAIRING MATERIALS CONSUMPTION Approx. 17.5 kg/m2/cm of layer thickness. PACKAGING It is supplied in paper bags of 5 kg and 25 kg in grey color. MEGACRET-40 FAST Fast-setting, high-strength, fibre-reinforced repairing cement mortar PROPERTIES - FIELDS OF APPLICATION High-strength, fibre-reinforced cementitious repairing mortar. Suitable for demanding repairs to concrete elements and generally wherever high strength and fast application is necessary. It is an ideal solution when repair works take place during low ambient temperatures (≥ +5°C) due to its fast setting properties. It is applied with a trowel or by gunite machine on floors, walls, or ceilings at the desired thickness, up to 4 cm per layer. It is characterised by superior strength,very good bonding onto the substrate, excellent workability, reduced water permeability and volume stability. Its usage requires only the addition of water. It is classified as a CC R4 mortar for concrete repairs, according to EN 1504-3. CONSUMPTION Approx. 17.5 kg/m2/cm of layer thickness. PACKAGING It is supplied in paper bags of 25 kg in grey color. MEGACRET-10 High-strength, fibre-reinforced repairing cement mortar for thin layers PROPERTIES - FIELDS OF APPLICATION High-strength, fibre-reinforced cementitious patching mortar enriched with polymers. Suitable for demanding repairs to concrete elements. It is applied with a trowel or by gunning device on floors, walls, or ceilings in a thickness of up to 10 mm per layer. Suitable for demanding repairs to concrete elements. It is applied with a trowel or by gunning device on floors, walls, or ceilings in a thickness of up to 10 mm per layer. It is classified as a CC R3 mortar for concrete repairs, according to EN 1504-3. CONSUMPTION Approx. 17.5 kg/m2/cm of layer thickness. PACKAGING It is supplied in paper bags of 25 kg in grey color. 15
  • 17. MEGAGROUT-100 PROPERTIES - FIELDS OF APPLICATION Pourable, high-strength, non-shrinking cement-based cast grout with special additives. It is applied in thickness of up to 100 mm. Suitable for repairs in damaged concrete elements, grouting in thin concrete jackets at existing concrete elements and filling of cavities and hollows in concrete elements. It is characterised by very good fluidity without segregation, and efficient bonding to steel and concrete. It has high initial and final strength, resistance to impacts and vibrations and low water permeability. Its usage requires only the addition of water. It is classified as a type B grout according to ASTM C 1107-99 and as a CC R4 mortar for concrete repairs, according to EN 1504-3. CONSUMPTION Approx. 21.5 kg/m2/cm of layer thickness, or 2.1 kg for filling 1 lit of volume. PACKAGING It is supplied in paper bags of 25 kg in grey color. MEGAGROUT-101 High-strength, non-shrinking pourable cast grout for precision grouting of machinery PROPERTIES - FIELDS OF APPLICATION Pourable, high-strength, non-shrinking cement-based cast grout with special additives. Suitable for grouting of machinery, anchoring and grouting of bases and bedplates of precision machinery. It is characterised by very good fluidity without segregation, and efficient bonding to steel and concrete. It has high initial and final strength, resistance to impacts and vibrations and low water permeability. Its usage requires only the addition of water. It is classified as a type C grout according to ASTM C 1107-99 and as a CC R4 mortar for concrete repairs, according to EN 1504-3. REPAIRING MATERIALS High-strength, non-shrinking pourable cast grout for repairs and strengthening CONSUMPTION Approx. 21.5 kg/m2/cm of layer thickness, or 2.1 kg for filling 1 lit of volume. PACKAGING It is supplied in paper bags of 25 kg in grey color. 16
  • 18. STUCCOCRET Spatula putty PROPERTIES - FIELDS OF APPLICATION White, extra fine-grained, polymer-modified cement-powder. It is used for smoothing and preparing interior surfaces that are going to be covered with paint or other coatings. It is suitable for surfaces made of concrete or plaster and replaces oil stuccos and other similar materials. Its usage requires only the addition of water. It is classified as type GP CS II, W0 mortar according to EN 998-1. CONSUMPTION PUTTIES Approx. 1.1 kg/m2/mm of layer thickness. PACKAGING It is supplied in plastic bags of 4 kg and paper bags of 10 kg and 20 kg in white color. STUCCOCRET-PLUS Spatula putty, with high coverage PROPERTIES - FIELDS OF APPLICATION White, extra fine-grained, polymer-modified cement-powder. It is used for smoothing and preparing interior surfaces that are going to be covered with paint or other coatings. It is suitable for surfaces made of concrete or plaster and replaces oil stuccos and other similar materials. Due to its small bulk density it easy to apply and covers up to 18% more surface than ordinary putties. Its usage requires only the addition of water. It gives a very smooth and hard final surface. It is classified as type GP CS II, W0 mortar according to EN 998-1. CONSUMPTION Approx. 0.9 kg/m2/mm of layer thickness. PACKAGING It is supplied in paper bags of 20 kg in white color. 17
  • 19. PLANFIX Polymer-modified cement putty PROPERTIES - FIELDS OF APPLICATION Polymer-modified, cement-based, fine-grained mortar, for indoor or outdoor application. Suitable for smoothing and repairing of exposed concrete and for sealing cracks, pores or cavities on concrete surfaces. It is also recommended for total surface smoothing (stuccoing) with very thin layers instead of plastering or cement mortar application. Its usage requires only the addition of water. It is classified as a PCC R2 type mortar, for concrete repairs, according to EN 1504-3. Approx. 1.3 kg/m2/mm of layer thickness. PACKAGING It is supplied in plastic bags of 5 kg in grey color and paper bags of 25 kg in grey and white color. PLANFIX-FINE PUTTIES CONSUMPTION Polymer-modified cement putty, extra fine-graded PROPERTIES - FIELDS OF APPLICATION Polymer-modified, cement-based, extra fine-grained putty mortar, for indoor or outdoor application. Suitable for smoothing and repairing of exposed concrete and for sealing cracks, pores or cavities on concrete surfaces. It is also recommended for total surface smoothing (stuccoing) with very thin layers instead of plastering or cement mortar application. Its usage requires only the addition of water. Because of its particle-size it can also be applied using a gunning device. It is classified as a PCC R2 type mortar, for concrete repairs, according to EN 1504-3. CONSUMPTION Approx. 1.3 kg/m2/mm of layer thickness. PACKAGING It is supplied in plastic bags of 5 kg in white color and paper bags of 25 kg in grey and white color. PLANFIX-FINE PROFESSIONAL Polymer-modified, cement putty, extra fine-graded, ideal for professionals PROPERTIES - FIELDS OF APPLICATION Polymer-modified, cement-based, extra fine-grained putty mortar, for indoor or outdoor application. With the addition of water a paste is formed, having very good workability, suitable for thin layers (e.g. puttying). Suitable for smoothing and repairing of exposed concrete and for sealing cracks, pores or cavities on concrete surfaces. It is also recommended for total surface smoothing (stuccoing) with very thin layers instead of plastering or cement mortar application. Compared to ordinary putties it is light weight and more easy to apply, it is easier to be sanded and has less consumption. Its usage requires only the addition of water. Because of its particle-size it can also be applied using a gunite machine. It is classified as a PCC R2 type mortar, for concrete repairs, according to EN 1504-3. CONSUMPTION Approx. 1.2 kg/m2/mm of layer thickness. PACKAGING It is supplied in paper bags of 25 kg in white color. 18
  • 20. FLEX-COVER 2-component flexible putty PROPERTIES - FIELDS OF APPLICATION 2-component, fibre-reinforced, flexible putty. It provides high elasticity, water impermeability and durability over time. It is used for local sealing and waterproofing of cracks, junctions between floors or ceilings and walls, window recesses etc. in a thickness of up to 5 mm, as well as for puttying surfaces with hair-cracks. It can be applied on plaster, concrete, gypsum boards, cement boards, wood etc. Suitable for indoor and outdoor applications. PUTTIES CONSUMPTION For sealing a 5 x 5 mm joint: 40 g per meter of joint. For surface puttying: 1.6 kg/m2/mm of layer thickness. PACKAGING It is supplied in combined 2.6 kg package (2 kg cement-based powder + 0.6 kg resin emulsion). FAST-COVER Ready-to-use, lightweight acrylic spackling putty PROPERTIES - FIELDS OF APPLICATION Ready-to-use acrylic spackling putty for fast filling and patching of cracks, crevices or holes with a single-step application. It is applied on porous surfaces such as plaster, gypsum board or other drywall structures, wood, etc. in thickness of up to 5 cm. It can be painted after 30 min. It does not crack and it does not need sanding. Suitbale for indoor and outdoor applications. PACKAGING It is supplied in plastic containers of 0.5 lit, 1 lit and 5 lit in white color. GB-COVER Pasty acrylic gypsum board putty - Joint compound PROPERTIES - FIELDS OF APPLICATION Ready-to-use gypsum board putty. It is ideal for gypsum board stuccoing, whereas in combination with joint tapes it is used as a joint compound for pointing and crack filling. It is very convenient in application and rubbing. It provides a flat and smooth final surface, ready for priming and painting. CONSUMPTION 2.0 - 3.0 kg/m², depending on layer thickness. PACKAGING It is supplied in plastic containers of 7 kg and 20 kg. 19
  • 21. FLOWCRET 1-10 Self-leveling, polymer-modified cementitious screed PROPERTIES - FIELDS OF APPLICATION Self-leveling, polymer-modified, cement-based mortar. Ideal for smoothing and leveling concrete, mortar or mosaic floors, before laying finishing materials like ceramic tiles, carpets, parquet, vinyl tiles etc. It is also applied as a final floor overlay in basements, attics, warehouses etc. Suitable for layers 1 - 10 mm thick. It forms a smooth and durable surface. It is classified as CT-C40-F10-AR2 according to EN 13813. CONSUMPTION PACKAGING It is supplied in paper bags of 25 kg in grey color. FLOWCRET 1-10 EXPRESS Fast-setting, self-leveling, polymer-modified cementitious screed PROPERTIES - FIELDS OF APPLICATION Fast-setting, self-leveling cementitious mortar enriched with resins, for interior use. Ideal for fast smoothening and leveling of concrete, screed, mosaic etc. before laying finishing materials like tiles, carpet, parquet etc. and for leveling floors with underfloor heating systems. It may also be left as a final topping layer in basements, attics, warehouses etc. or in residencies. In white color it can be mixed with pigments of iron oxides, to provide a colored final surface. It features high mechanical strength, superb adhesion to the substrate, excellent workability, fast-hardening and slightest shrinkage. Suitable for layers 1 - 10 mm thick. It provides a smooth and durable final surface, that is walkable after 3 hours and can be covered after only 24 hours. It is classified as a screed material CT-C30-F7-AR4 (grey) and CT-C30-F7-AR6 (white) according to EN 13813. FLOORINGS Approx. 1.65 kg /m2 /mm of layer thickness. CONSUMPTION Approx. 1.65 kg /m2 /mm of layer thickness. PACKAGING It is supplied in paper bags of 25 kg in grey and white color. FLOWCRET 3-30 EXPRESS Fast-setting, self-leveling, polymer-modified compound PROPERTIES - FIELDS OF APPLICATION Fast-setting, self-leveling, polymer-modified compound, used for flooring applications indoors. Ideal for fast smoothening and leveling of concrete, screed, mosaic, ceramic tiles etc. before laying finishing materials like ceramic tiles, carpets, parquet, vinyl tiles, marbles, natural stones etc. Suitable for leveling floors with underfloor heating systems. It may be also left as a final topping layer in basements, attics, warehouses etc. It forms a smooth and durable surface. Suitable for layers 3 - 30 mm thick. Recommended for fast applications thanks to its fast-setting property. It is classified as CT-C40-F10AR2 according to EN 13813. CONSUMPTION Approx. 1.65 kg /m2 /mm of layer thickness. PACKAGING It is supplied in paper bags of 25 kg in grey color. 20
  • 22. SCREED-100 Floor leveling cement mortar PROPERTIES - FIELDS OF APPLICATION Pre-mixed cement mortar that replaces non-reinforced concrete or gasconcrete in indoor or outdoor areas. Ideal for filling and leveling of floors to be covered with tiles, marble, wood, parquet etc. It is also used as cement mortar grade for bathrooms, terraces, balconies and other outdoor areas. It has low weight, good strength and excellent workability. It provides a final smooth surface. It can be applied in a thickness of up to to 10 cm per layer. It is classified as CT-C7-F3-A12 according to ΕΝ 13813. FLOORINGS CONSUMPTION Approx. 14 kg/m2/cm of layer thickness. PACKAGING It is supplied in paper bags of 25 kg in grey color. SCREED-SX Fast-setting cement mortar-binder for floor screeds PROPERTIES - FIELDS OF APPLICATION Fibre-reinforced, fast-setting mortar that replaces cement in floor screeds. Ideal for filling and leveling of floors that are going to be covered fast (after only 24 hours) with tiles, marble, wood, parquet, for floors with underfloor heating system etc., since its contained moisture is reduced faster than a screed with normal setting cement. (Approximately 2 - 4 days after the application depending on the mixing ratio with sand and water). It is applied in a thickness of between 2 and 10 cm. It is also used as a cement mortar grade for terraces and other outdoor areas. It can be mixed also with perlite in order to produce light weight screeds. It provides fast hardening and high early strengths, long workability time, fast walkability (after approximately 6 hours), higher mechanical strength than a screed with normal setting cement. It can be pumped for faster application. CONSUMPTION Approx. 2.0 - 3.5 kg/m2/cm. PACKAGING It is supplied in paper bags of 20 kg in grey color. 21
  • 23. EXTRA-TOP Hardening agent for industrial floors PROPERTIES - FIELDS OF APPLICATION Pre-mixed mortar with quartz aggregates and special admixtures for hardening the surface of new industrial floors. It is used in applications with high demands in mechanical strength. It is applied on cementitious substrates like concrete or screeds. It is appropriate for industrial floors, basements, auto repair shops, machine shops, parking lots, warehouses, loading-unloading areas etc. It offers high resistance in abrasion and shocks. It is classified as CT-C70-F7-AR2 according to EN 13813. PACKAGING It is supplied in paper bags of 25 kg in grey, ochre, redbrown and light blue color. EXTRA-TOP CR FLOORINGS CONSUMPTION 3 - 5 kg/m2. Hardening agent for industrial floors with corundum PROPERTIES - FIELDS OF APPLICATION Pre-mixed mortar with corundum, quartz aggregates and special admixtures for hardening the surface of new industrial floors. It is used in applications with very high demands in mechanical strength. It is applied on cementitious substrates like concrete or screeds. It is appropriate for industrial floors, basements, auto repair shops, machine shops, parking lots, warehouses, loading-unloading areas, etc. It offers very high resistance in abrasion and impacts. It is classified as CT-C80-F10-AR1 according to EN 13813. CONSUMPTION 3 - 5 kg/m2. PACKAGING It is supplied in paper bags of 25 kg in grey color. 22
  • 24. 1112 THESSALONIKI, GREECE 17th km Thessaloniki - Ag. Athanasios Road P. O. BOX 1043, 570 03 AG. ATHANASIOS, GREECE Τ +30 2310 576 000, F +30 2310 722 475 ISOMAT S.A. ΒUILDING CHEMICALS & MORTARS www.isomat.eu export@isomat.eu