Andel ppl oil star tank guard spec sheet

160 views
94 views

Published on

0 Comments
0 Likes
Statistics
Notes
  • Be the first to comment

  • Be the first to like this

No Downloads
Views
Total views
160
On SlideShare
0
From Embeds
0
Number of Embeds
1
Actions
Shares
0
Downloads
1
Comments
0
Likes
0
Embeds 0
No embeds

No notes for slide

Andel ppl oil star tank guard spec sheet

  1. 1. Tel: +44 (0)191 490 1547 Fax: +44 (0)191 477 5371 Email: northernsales@thorneandderrick.co.uk Website: www.heattracing.co.uk www.thorneanderrick.co.uk Andel-PPL Oilstar Tank Guard The Andel-PPL Oilstar Tank Guard overfill and bund leak alarms are for use in all tanks containing oil, fuel oil, DERV and any other non-explosion hazard liquids. The Tank Guard monitors tank filling operations by warning when the maximum level is reached. The maximum level is typically 95% of the maximum volume of the tank. The sensor(s) can also be lowered into the dry cavity or interstitial space of “self-bunded” or “double-skinned” tanks. The operator has no way of seeing into this space so the only way of knowing if the inner tank is leaking or has failed is through an automatic monitoring system such as Tank Guard. The Tank Guard can be configured as 1 or 2 channels and in special cases 3 channels. On site operation could be any of the following configurations: 1 Channel: Overfill only OR bund leak alarm only 2 Channel: Overfill alarm AND bund leak alarm 3 Channel: Any combination of above two options. The Tank Guard unit is easy to install and operate. Built in a high-impact, IP66 rated box it can be mounted internally or externally to suit. Tank Guard Function: Overfill and bund leak warning system Power: 7.5 watts @ 110/230 VAC 50/60Hz Construction: Control Box: IP66 rated polystyrene box, grey (RAL 7035) Dimensions: H182 x W180 x D90 mm Fixing: Fixed to a wall with mounting lugs Sensor probe: Brass/polymer Cable length 10 metres Monitoring: Tank Full- continuous monitoring Bund Alarm - continuous monitoring Status and Alarm Indicators: Led visual display Audible buzzer Controls: Mute button Test Button Outputs: 1. “Volt-free” contact 2A @ 230VAC/30VDC E&OE 11r01 www.pollutionprevention.co.uk Tel: +44 (0) 1484 845 000 Andel Ltd and BSI registered address

×