Blind handover

4,743 views
4,527 views

Published on

Published in: Technology
0 Comments
1 Like
Statistics
Notes
  • Be the first to comment

No Downloads
Views
Total views
4,743
On SlideShare
0
From Embeds
0
Number of Embeds
0
Actions
Shares
0
Downloads
276
Comments
0
Likes
1
Embeds 0
No embeds

No notes for slide

Blind handover

  1. 1. UMTS WCDMA handover or handoff :: Radio-Electronics.Com Página 1 de 5 Follow us on Twitter Access our news feed Subscribe to our newsletter Search • Home • • Antennas & propagation • Broadcast technology • Cellular telecoms • Circuits & modules • Design principles • Electronic components • Electronics manufacture • Formulae & data • Power management • RF topics & receivers • Satellite technology • Technology history • Telecoms & networks • Test & measurement • Wireless technology • • News • Bookshop • Training & courses • Events & exhibitions • Jobs • • About us • Privacy Policy • Advertise with us Ads by GoogleHandoverGSMCDMA GSMNavigation:: Radio-Electronics.com Home >> Cellular telecoms >> this pagehttp://www.radio-electronics.com/info/cellulartelecomms/umts/umts-wcdma-handove... 21/02/2012
  2. 2. UMTS WCDMA handover or handoff :: Radio-Electronics.Com Página 2 de 5UMTS WCDMA handover or handoff- tutorial, overview of the basics of handover or handoff within UMTS detailing hard handover,soft handover, softer handover and inter-RAT UMTS GSM handover.UMTS WCDMA tutorial includes: • UMTS WCDMA Tutorial • UMTS 3G history • UMTS WCDMA network architecture • UMTS / WCDMA radio or air interface • CDMA multiple access technology • UMTS / WCDMA modulation schemes • UMTS WCDMA channels • UMTS TDD • TD-SCDMA • UMTS WCDMA handover / handoffHandover or handoff is as important for UMTS as any other form of cellular telecommunications system. As with any othercellular telecommunications system it is essential that UMTS handover is performed seamlessly so that the user is notaware of any change. Any failures within the UMTS handover (or UMTS handoff) procedure will lead to dropped callswhich will in turn result in user dissatisfaction and ultimately it may lead to users changing networks, thereby increasing thechurn rate.It is worth noting that the two terms UMTS handover and UMTS handoff have the same meaning. UMTS handover tends isthe terminology that tends to be used within Europe, whereas UMTS handoff is more likely to be used within NorthAmerica.UMTS handover typesWithin UMTS it is possible to define a number of different types of UMTS handover or handoff. With the advent of genericCDMA technology, new possibilities for effecting more reliable forms of handover became possible, and as a result one ofa variety of different forms of handover are available depending upon the different circumstances.For purely inter W-CDMA technology, there are three basic types of handover: • Hard handover: This form of handover is essentially the same as that used for 2G networks where one link is broken and another established. • Soft handover: This form of handover is a more gradual and the UE communicates simultaneously with more than one Node B or base station during the handover process. • Softer handover: Not a full form of UMTS handover, but the UE communicates with more than one sector managed by the same NodeB. • UMTS GSM inter RAT handover: This form of handover occurs when mobiles have to change between Radio Access Technologies.Each of the different types of handover is used on different occasions dependent upon the conditions. Further details of eachtype of UMTS handover are given in the individual sections below.http://www.radio-electronics.com/info/cellulartelecomms/umts/umts-wcdma-handove... 21/02/2012
  3. 3. UMTS WCDMA handover or handoff :: Radio-Electronics.Com Página 3 de 5UMTS hard handoverThe name hard handover indicates that there is a "hard" change during the handover process. For hard handover the radiolinks are broken and then re-established. Although hard handover should appear seamless to the user, there is always thepossibility that a short break in the connection may be noticed by the user.The basic methodology behind a hard handover is relatively straightforward. There are a number of basic stages of a hardhandover: 1. The network decides a handover is required dependent upon the signal strengths of the existing link, and the strengths of broadcast channels of adjacent cells. 2. The link between the existing NodeB and the UE is broken. 3. A new link is established between the new NodeB and the UE.Although this is a simplification of the process, it is basically what happens. The major problem is that any difficulties in re-establishing the link will cause the handover to fail and the call or connection to be dropped.UMTS hard handovers may be used in a number of instances: • When moving from one cell to an adjacent cell that may be on a different frequency. • When implementing a mode change, e.g. from FDD to TDD mode, for example. • When moving from one cell to another where there is no capacity on the existing channel, and a change to a new frequency is required.One of the issues facing UMTS hard handovers was also experienced in GSM. When usage levels are high, the capacity ofa particular cell that a UE is trying to enter may be insufficient to support a new user. To overcome this, it may be necessaryto reserve some capacity for new users. This may be achieved by spreading the loading wherever possible - for exampleUEs that can receive a sufficiently strong signal from a neighbouring cell may be transferred out as the original cell nearsits capacity level.UMTS soft handoverSoft handover is a form of handover that was enabled by the introduction of CDMA. Soft handover occurs when a UE is inthe overlapping coverage area of two cells. Links to the two base stations can be established simultaneously and in this waythe UE can communicate with two base stations. By having more than one link active during the handover process, thisprovides a more reliable and seamless way in which to perform handover.In view of the fact that soft handover uses several simultaneous links, it means that the adjacent cells must be operating onthe same frequency or channel as UEs do not have multiple transmitters and receivers that would be necessary if they wereon different frequencies.When the UE and NodeB undertake a soft handover, the UE receives signals from the two NodeBs and combines themusing the RAKE receiver capability available in the signal processing of the UE.In the uplink the situation is more complicated as the signal combining cannot be accomplished in the NodeB as more thanone NodeB is involved. Instead, combining is accomplished on a frame by frame basis. The best frames are selected aftereach interleaving period. The selection is accomplished by using the outer loop power control algorithm which measuresthe signal to noise ratio (SNR) of the received uplink signals. This information is then used to select the best quality frame.Once the soft handover has been completed, the links to the old NodeB are dropped and the UE continues to communicatewith the new NodeB.As can be imagined, soft handover uses a higher degree of the network resources than a normal link, or even a hardhandover. However this is compensated by the improved reliability and performance of the handover process. Howeverwith around 5 to 10% of handovers falling into this category, network operators need to account for it.Note on the RAKE receiverA RAKE receiver is a form of radio receiver that has been made feasible in many areas by the use of digital signalprocessing, DSP. It is often used to overcome the effects of multipath propagation. It achieves this by using several sub-receivers known as "fingers" which are given a particular multipath component. Each finger then processes its componentand decodes it. The resultant outputs from the fingers are then combined to provide the maximum contribution from eachpath. In this way rake receivers and multipath propagation can be used to improve the signal to noise performance.http://www.radio-electronics.com/info/cellulartelecomms/umts/umts-wcdma-handove... 21/02/2012
  4. 4. UMTS WCDMA handover or handoff :: Radio-Electronics.Com Página 4 de 5UMTS softer handoverA form of handover referred to as softer handover is really a special form of soft handover. It is a form of soft handover thatoccurs when the new radio links that are added are from the same NodeB. This occurs when several sectors may be servedfrom the same NodeB, thereby simplifying the combining as it can be achieved within the NodeB and not require linkingfurther back into the network.UMTS softer handover is only possible when a UE can hear the signals from two sectors served by the same NodeB. Thismay occur as a result of the sectors overlapping, or more commonly as a result of multipath propagation resulting fromreflections from buildings, etc.In the uplink, the signals received by the NodeB, the signals from the two sectors can be routed to the same RAKE receiverand then combined to provide an enhanced signal.In the downlink, it is a little more complicated because the different sectors of the NodeB use different scrambling codes.To overcome this, different fingers of the RAKE receiver apply the appropriate de-spreading or de-scrambling codes to thereceived signals. Once this has been done, they can be combined as before.In view of the fact that a single transmitter is used within the UE, only one power control loop is active. This may not beoptimal for all instances but it simplifies the hardware and general operation.Inter-RAT / Intersystem UMTS / GSM handoverIn many instances it is necessary for the UMTS radio access network to handover to the 2G GSM network. Thesehandovers are given a variety of names including Inter-RAT handover as they are handing over between different forms ofRadio Access Technology, Intersystem Handover, and UMTS / GSM Handover. These handovers may be required for oneof a variety of reasons including: • Limited UMTS coverage • UMTS network busy whereas spare capacity is available on GSM networkThe most common form of intersystem or inter-RAT handover is between UMTS and GSM. There are two different typesof inter-RAT handover: • UMTS to GSM handover: There are two further divisions of this category of handover: ◦ Compressed mode handover: Using compressed mode handover the UE uses the gaps in transmission that occur to analyse the reception of local GSM base stations. The UE uses the neighbour list provided by the UMTS network to monitor and select a suitable candidate base station. Having selected a suitable base station the handover takes place, but without any time synchronisation having occurred. ◦ Blind handover: This form of handover occurs when the base station hands off the UE by passing it the details of the new cell to the UE without linking to it and setting the timing, etc of the mobile for the new cell. In this mode, the network selects what it believes to be the optimum GSM based station. The UE first locates the broadcast channel of the new cell, gains timing synchronisation and then carries out non-synchronised intercell handover. • Handover from GSM to UMTS : This form of handover is supported within GSM and a "neighbour list" was established to enable this occur easily. As the GSM / 2G network is normally more extensive than the 3G network, this type of handover does not normally occur when the UE leaves a coverage area and must quickly find a new base station to maintain contact. The handover from GSM to UMTS occurs to provide an improvement in performance and can normally take place only when the conditions are right. The neighbour list will inform the UE when this may happen.UMTS handover methodologyThe decisions about handover are generally handled by the RNC. It continually monitors information regarding the signalsbeing received by both the UE and NodeB and when a particular link has fallen below a given level and another better radiochannel is available, it initiates a handover. As part of this monitoring process, the UE measures the Received Signal CodePower (RSCP) and Received Signal Strength Indicator (RSSI) and the information is then returned to the node B and henceto the RNC on the uplink control channel.<< Previous | Next >>http://www.radio-electronics.com/info/cellulartelecomms/umts/umts-wcdma-handove... 21/02/2012
  5. 5. UMTS WCDMA handover or handoff :: Radio-Electronics.Com Página 5 de 5 Other popular cellular tutorials . . . . . • 3G LTE • LTE Advanced • UMTS / W-CDMA • GSM • 3G HSPA • CDMA2000 • GPRS • EDGE • Femtocells 0 6 Learn 1000 Spanish Words Learn Easy Spanish You Can Use Fast Learn 1000 Spanish Words Instantly shortcuttospanish.com Automated Test & Fixtures Automated Diagnostic Testing Tools Automate Test Equipment Fixturing www.huntron.com Wireless Sensor Systems Wireless Level Sensors, Wireless Sensor systems designed for you. www.deeterelectronicsinc.comRadio-Electronics.com is operated and owned by Adrio Communications Ltd and edited by Ian Poole. All information is ©Adrio Communications Ltd and may not be copied except for individual personal use. This includes copying material inwhatever form into website pages. While every effort is made to ensure the accuracy of the information on Radio-Electronics.com, no liability is accepted for any consequences of using it. By using this site, these terms are accepted.Privacy Policyhttp://www.radio-electronics.com/info/cellulartelecomms/umts/umts-wcdma-handove... 21/02/2012

×