How to Make Your
Saturn V
Part 1
Figure
1.1Figure
1.2
Figure 1
Cut out the Figures 1, 1.1 and 1.2 from Page 1.
Glue half of the Figures 1.1 (horizontal) an...
Figure 2
Figure 3
Figure 4
Cut out the Figures 2, 3 and 4 from Page 2.
Fold A, B, C and D part of the Figure 3 along the line in
the middle as shown above.
Cut the all the parts of figure 2 in the center along the red line
shown in the image above.
Be careful while using sharp ...
Now insert the folded Figure 3 in the gap you just cut in
the Figure 2.
Spread out the edges of the Figure 3 as in the image so
it won’t fall out.
Then fold the corners of the Figure 2 as shown.
Now use a cutter to cut the Figure 1 as shown above
Be careful while using sharp objects. Ask your parents for help.
Now use all the Figures of 2+3 and insert their folded parts in
the cut on Figure 1 and stick it with gum.
Repeat the same...
This is how it would look like once you are done with
the above step.
Take this new Figure 1 and roll it in a cylindrical shape
use the other part of Figure 1.2 to join it.
Final Figure 1
Part 2
Figure 5.2
Figure
5.1
Figure 5
Cut out the Figures 5, 5.1 and 5.2 from the Page 3
Stick Figure 5.2 on the edge of Figure 5 horizontally.
Figure
5.2
Figure 5
Stick Figure 5.1 on the edge of figure 5 vertically.
Figure
5.1
Figure
5
Now roll it up in a cylindrical shape and join it like you
did with Figure 1.
Final Figure 5
Part 3
Figure 9.3
Figure 9
Figure 9.2
Figure
9.1
Cut out the Figures 9, 9.1, 9.2 and 9.3 from the Page 4
Stick Figure 9.3 on the edge of Figure 9 horizontally.
Figure 9.3
Figure 9
Now roll it up in a cylindrical shape and join it like you
did with Figure 1.
Final Figure 9
Figure 6
Figure 7
Cut out the Figures 6 and 7 from the Page 3.
Fold the Figure 7 as shown above and use the Figure 6 as its
base.
Final Figure 7
Take the final Figure 9 and insert it inside the final
Figure 7 so it looks like the above image.
Final Figure 9
Final Fig...
Part 4
Figure 10
Figure 8
Figure 11
Figure 11.1
Cut out the Figures 8, 10 11 and 11.1 from Page 4
Stick the Figure 11.1 to the Figure 11 as shown above.
Figure 11
Figure 11.1
Now roll up the Figure 11 as shown above and stick the Figures 8
and 10 on the top and bottom of it.
Final Figure 11
Part 5
Figure 13.1
Figure 13
Figure
13.3
Figure 13.0
Cut out the Figures 13, 13.0, 13.1 and 13.3 from the Page 5
Join the Figures 13.0, 13.1 and 13.3 to the Figure 13 as
shown above.
Figure 13.1
Figure 13
Figure
13.3
Figure 13.0
Cut out the Figures 12,14, 15, 15.1,16, 17 and 18 from
Page 5.
Figure 12
Figure 14
Figure 16
Figure 18
Figure 17
Figure 15...
Roll up the Figures 17 and 16 to make them like the ones on the right hand side.
Figure 17
Figure 16
Figure 15
Figure
15.1
Use the Figure 15.1 to roll up the Figure 15 to
make it look like the image on the right side.
Modified Figure 13 Figure 14 & 12
Use the new Figure 13 you have, roll it up and stick
Figure 14 and 12 on the top and bot...
Now join all the parts on top of each other
and…
Your Very Own Saturn V
Steps to apollo11
Upcoming SlideShare
Loading in …5
×

Steps to apollo11

414 views
343 views

Published on

Published in: Entertainment & Humor
0 Comments
0 Likes
Statistics
Notes
  • Be the first to comment

  • Be the first to like this

No Downloads
Views
Total views
414
On SlideShare
0
From Embeds
0
Number of Embeds
1
Actions
Shares
0
Downloads
1
Comments
0
Likes
0
Embeds 0
No embeds

No notes for slide
  • First cut out the figures 1, 1.1 and 1.2 from the pdf
  • Steps to apollo11

    1. 1. How to Make Your Saturn V
    2. 2. Part 1
    3. 3. Figure 1.1Figure 1.2 Figure 1 Cut out the Figures 1, 1.1 and 1.2 from Page 1. Glue half of the Figures 1.1 (horizontal) and 1.2 (vertical) under the edges of Figure 1 along the dotted lines as shown above.
    4. 4. Figure 2 Figure 3 Figure 4 Cut out the Figures 2, 3 and 4 from Page 2.
    5. 5. Fold A, B, C and D part of the Figure 3 along the line in the middle as shown above.
    6. 6. Cut the all the parts of figure 2 in the center along the red line shown in the image above. Be careful while using sharp objects. Ask your parents for help.
    7. 7. Now insert the folded Figure 3 in the gap you just cut in the Figure 2.
    8. 8. Spread out the edges of the Figure 3 as in the image so it won’t fall out.
    9. 9. Then fold the corners of the Figure 2 as shown.
    10. 10. Now use a cutter to cut the Figure 1 as shown above Be careful while using sharp objects. Ask your parents for help.
    11. 11. Now use all the Figures of 2+3 and insert their folded parts in the cut on Figure 1 and stick it with gum. Repeat the same thing with the other Figures of 2+3 as well.
    12. 12. This is how it would look like once you are done with the above step.
    13. 13. Take this new Figure 1 and roll it in a cylindrical shape use the other part of Figure 1.2 to join it. Final Figure 1
    14. 14. Part 2
    15. 15. Figure 5.2 Figure 5.1 Figure 5 Cut out the Figures 5, 5.1 and 5.2 from the Page 3
    16. 16. Stick Figure 5.2 on the edge of Figure 5 horizontally. Figure 5.2 Figure 5
    17. 17. Stick Figure 5.1 on the edge of figure 5 vertically. Figure 5.1 Figure 5
    18. 18. Now roll it up in a cylindrical shape and join it like you did with Figure 1. Final Figure 5
    19. 19. Part 3
    20. 20. Figure 9.3 Figure 9 Figure 9.2 Figure 9.1 Cut out the Figures 9, 9.1, 9.2 and 9.3 from the Page 4
    21. 21. Stick Figure 9.3 on the edge of Figure 9 horizontally. Figure 9.3 Figure 9
    22. 22. Now roll it up in a cylindrical shape and join it like you did with Figure 1. Final Figure 9
    23. 23. Figure 6 Figure 7 Cut out the Figures 6 and 7 from the Page 3.
    24. 24. Fold the Figure 7 as shown above and use the Figure 6 as its base. Final Figure 7
    25. 25. Take the final Figure 9 and insert it inside the final Figure 7 so it looks like the above image. Final Figure 9 Final Figure 7
    26. 26. Part 4
    27. 27. Figure 10 Figure 8 Figure 11 Figure 11.1 Cut out the Figures 8, 10 11 and 11.1 from Page 4
    28. 28. Stick the Figure 11.1 to the Figure 11 as shown above. Figure 11 Figure 11.1
    29. 29. Now roll up the Figure 11 as shown above and stick the Figures 8 and 10 on the top and bottom of it. Final Figure 11
    30. 30. Part 5
    31. 31. Figure 13.1 Figure 13 Figure 13.3 Figure 13.0 Cut out the Figures 13, 13.0, 13.1 and 13.3 from the Page 5
    32. 32. Join the Figures 13.0, 13.1 and 13.3 to the Figure 13 as shown above. Figure 13.1 Figure 13 Figure 13.3 Figure 13.0
    33. 33. Cut out the Figures 12,14, 15, 15.1,16, 17 and 18 from Page 5. Figure 12 Figure 14 Figure 16 Figure 18 Figure 17 Figure 15 Figure 15.1
    34. 34. Roll up the Figures 17 and 16 to make them like the ones on the right hand side. Figure 17 Figure 16
    35. 35. Figure 15 Figure 15.1 Use the Figure 15.1 to roll up the Figure 15 to make it look like the image on the right side.
    36. 36. Modified Figure 13 Figure 14 & 12 Use the new Figure 13 you have, roll it up and stick Figure 14 and 12 on the top and bottom of it.
    37. 37. Now join all the parts on top of each other and…
    38. 38. Your Very Own Saturn V

    ×