High Quality HDPE Products You Can Depend OnA PARTNERSHIP YOU CAN DEPEND ONLane’s commitment to quality extends to the services and personalities that support our product . . . technical and responsive services toaid the designer, support the contractor and assure the end user . . . from specification assistance to product submissions, from completeCAD services to application engineering, from total order management to installation consultation . . . a partnership you can depend on.Please contact your local Lane representative to help ensure a successful project.LANE’S HDPE DRAINAGE PIPE PIPE SIZES AND HANDLING WEIGHTSLane’s High Density Polyethylene (HDPE) pipe is a heavy-duty Nominal Actual 1 Single-Wall 2 Double-Wallcorrugated pipe for storm sewers, culverts, storm water storage, and Inside Outside Handling Handlingwater quality applications. Lane’s HDPE pipe is available in diameters Diameter Diameter Weight Weight (in) (in) (lb/ft) (lbs/20ft)ranging from 4” to 48”, in both single and double-wall profiles (i.e. 4 4.75 0.31 3 n/acorrugated or smooth interior). With options for perforated or non- 6 7.05 0.78 20perforated patterns along with standard or custom fabricated fittings, 8 9.40 1.10 30Lane’s HDPE pipe offerings can meet all the subsurface drainage 10 12.00 1.80 40demands of your site, building, roads and pavements. 12 14.50 3.01 60 15 17.50 4.31 100HIGH QUALITY HDPE RESINS 18 24 21.50 28.00 6.01 9.49 120 200State DOT specifications require virgin resins in accordance with AASHTO 30 34.50 n/a 300M252 and M294, while local agencies may permit the use of recycled 36 41.00 n/a 400materials when managing “Green Building” incentives. Whether made 42 47.50 n/a 550from prime virgin resins or material with a recycled content, Lane’s HDPE 48 54.50 n/a 640pipe has the strength and service life needed for your project. AASHTO Type C (Type CP, Class 1 and 2 perforations) 1 AASHTO Type S (Type SP, Class 1 and 2 perforations) 2 AASHTO GRADE RESINS . . . Incoming prime virgin resin contains Available as a re-sale item through Lane 3 a certificate of analysis that indicates the material was made exclusively for the AASHTO M252/M294 market. All AASHTO polyethylene pipe products are manufactured, tested and supplied HEIGHTS OF COVER FOR LANE HDPE PIPE in accordance with the National Transportation Product Evaluation Program (NTPEP), a division of AASHTO. Under this program NTPEP AASHTO Minimum Cover for Vehicular Loading ...............12 inches certifies that Lane pipe products meet or exceed the requirements Minimum Cover for E-80 (Rail Road) Loads.........................24 inches of AASHTO M252/M294. Temporary Cover for Construction Loads1...........................3 to 5 feet AASHTO Maximum Burial Depths2 .......................................+20 feet RECYCLED GRADE RESINS . . . Lane’s recycled grade polyethylene pipe is an engineered compound of high density polyethylene 1 Cover for construction loads depends on the pipe diameter and resins meeting the cell classifications and performance the construction equipment loading. Consult Lane’s HDPE Pipe requirements associated with state highway specifications, Installation Practice for details. and more specifically, ASTM F2648 (see table next page). With 2 Maximum burial depths greater than 20 feet are attainable with a minimum recycled content of 40%, this product is designed to qualify for LEED credits while maintaining a high level of quality embedment materials and good compaction levels. It is performance. recommended to obtain a cover height calculation from Lane using the AASHTO LRFD methodology for the site-specific installation conditions.
SERVICE LIFELane’s HDPE pipe is a tough, durable, chemically inert product that is highly resistantto abrasion and corrosion. AASHTO currently recognizes a 75 year service life forcorrugated HDPE pipe, while some DOT’s have even adopted a 100 year service lifeprotocol for this class of pipe. Coupled with the strength inherent in the corrugatedprofile design, Lane’s HDPE pipe is designed to meet the most challenging service lifecriteria defined for construction projects today.HYDRAULICALLY EFFICIENTThe smooth interior of Lane’s double-wall HDPE pipe creates a hydraulically efficientflow that meets the strictest values specified for gravity drainage. Hydraulic tests performed over the years consistently show aManning’s n in the range of 0.009 to 0.011. The major investigation cited in this regard is the 2005 Utah State University studywhich recognized an effective Manning’s n as low as 0.010. A Manning’s n for design is conservatively factored to 0.012 to accountfor the varying affects of field installations as compared to the laboratory environment.FITTINGS AND CUSTOM FABRICATIONLane’s fitting fabrication shop produces a full assortment of standard fittings and special fabrications in all diameters. These fittingsare used in storm water storage, flow control and water quality applications. Standard and special drawings are available from Laneto aid the designer in the use of corrugated HDPE for related applications.WATER-TIGHT JOINT CONFIGURATIONSBell and spigot couplers are provided on nominal 20 ft pipe lengths for diameters ranging from 6” to 48”. With the inclusion of afactory installed gasket meeting the requirements of ASTM F477, properly installed bell and spigot couplers can provide a water-tight connection (i.e. laboratory pressure tested to 10.8 psi per ASTM D3212). Third party test results are available to certify the pipejoints meet the laboratory water-tight requirements of ASTM D3212.INSTALLATIONCorrugation profiles are designed to produce extremely high strength-to-weight ratios, which makes installation one of the main advantagesover other pipe types. Load carrying capacities increase with the quality ofembedment material and compaction levels. Installations in accordancewith AASHTO, ASTM D2321 or Lane’s published guidelines will ensure properperformance at the minimum and maximum cover heights possible withLane’s corrugated HDPE pipe. SPECIFICATIONS ASSOCIATED WITH LANE’S CORRUGATED HDPE PIPE Specification Description Application AASHTO M2521 Corrugated HDPE Pipe (3” to 10”) Storm Sewers, Culverts and Subsurface Drainage Systems AASHTO M2941 Corrugated HDPE Pipe (12” to 60”) Storm Sewers, Culverts and Subsurface Drainage Systems AASHTO LRFD Bridge Design Specifications (Section 12) Cover Height (Structural) Calculation Procedure AASHTO LRFD Bridge Construction Specifications (Section 30) Standard Practice and Guidelines for Installation ASTM D3212 Joints Using Flexible Elastomeric Seals Watertight Joint Certification (10.8 psi rating) ASTM F477 Elastomeric Seals (Gaskets) for Joining Pipe Gasket Material Required for ASTM D3212 Certification ASTM D3350 Polyethylene Plastics Pipe and Fittings Materials Identification of Polyethylene Material Properties ASTM F23061 Corrugated HDPE Gravity-Flow Storm Sewer (12” to 60”) Storm Sewers and Subsurface Drainage Systems ASTM F4051,2 Corrugated HDPE Pipe and Fittings (3” to 6”) Soil Drainage and Septic Field Leach Beds ASTM F6671,2,3 Corrugated HDPE Pipe and Fittings (8” to 24”) Culverts and Subsurface Drainage Systems ASTM F26481,3 Corrugated HDPE Pipe and Fittings (2” to 60”) Culverts and Subsurface Drainage Systems Specification identifies the material, manufacture and workmanship requirements for the intended application 1 Specification intended for single-wall (internally and externally corrugated) pipe 2 Intended for the agricultural, landfill and forestry markets 3
Special Applications You Can Depend OnLANE’S COIL PIPEConsistent with Lane’s commitment to high quality, coil pipe is produced usingquality resins that ensure high strength and a long service life. Available in 4”, 6”and 8” diameters, in perforated or non-perforated patterns, with a full range offittings, Lane’s coil pipe is made with resins that meet or exceed the standardsset by pertinent DOT, forestry or agricultural agencies. Whether made with primevirgin resins or with a recycled content, Lane’s coil pipe has the strength andservice life needed for your project.Product Options: Perforated Applications:• 4”, 6” and 8” Diameters • Athletic/Recreational Field Drainage• Agricultural or DOT Grade • Agricultural Drainage• Perforated or Solid Wall • Golf Course/Landscape Drainage• Small Coils or Maxi Coils • Retaining Wall Drain• Couplers, Fittings and Appurtenances • Highway Under Drain • Foundation/Basement DrainSolid Wall Applications:• Roof Drains• Downspouts• Driveway Culverts• Rear Yard Sump Mains• Agricultural Mains• Outlet Drains
CFT WATER QUALITY UNITThe Counter Flow Technology (CFT) water quality unit is a cost-effectiveand eco-friendly structural BMP designed to treat the “first flush” of astorm event by intercepting flow, removing pollutants, and re-introducingtreated flow in a manner suitable for today’s storm water regulations.Lane’s CFT is manufactured from high-quality corrugated HDPE pipe andhas no mechanical, moving or replacement parts, and is less costly, morereliable and offers better efficiency then comparable products.STORM WATER MANAGEMENT SYSTEMSLane manufactures Storm Water Management Systems for detention,retention and infiltration purposes. As a manufacturer of both corrugatedmetal and polyethylene pipe, Lane enjoys the unique position of being ableto supply whichever product is better suited for the project. Since Lanealso manages 100% of the fabrication work for both standard and customfittings, the customer can have the same superior quality in every piecedelivered to the site.
• Steel and Aluminum Structural PlateLane enterprises, inc. • Corrugated Steel and Aluminum Pipe3905 Hartzdale Drive,Suite 514 • Spiral Rib PipeCamp Hill, PA 17011717-761-8175 • Corrugated HDPE PipeToll-Free (866) 864-7419Fax 717-761-5055 • Open Top Slotted Drainwww.lane-enterprises.com • Welded Wire Mesh Gabionsnew YorkBallston Spa (518) 885-4385 • Storm Water Management SystemsBath (607) 776-3366 • Water Quality Devicesnorth caroLina • Specialty FabricationsStatesville (704) 872-2471pennsYLvania • Structural Plate HeadwallsBedford (814) 623-1191 • Long Span StructuresCarlisle (717) 249-8342King of Prussia (610) 272-4531 • Powder CoatingsPulaski (724) 652-7747Shippensburg (717) 532-5959virginiaBealeton (540) 439-3201Dublin (540) 674-4645Wytheville (276) 223-1051 “You can Depend on L Lane.” The information contained in this brochure is for general use and should not be used without first securing competent engineering advice as to suitability for any specific application. THE PUBLICATION OF THIS INFORMATION IS NOT INTENDED AS A REPRESENTATION OR WARRANTY INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.