Conveyor belt furnace for little parts of textile machines

1. www.solo.swiss
SOLO Swiss SA
Grandes-Vies 25, 2900 Porrentruy, Switzerland
Tel. +41 32 465 96 00
Fax +41 32 465 96 05
mail@soloswiss.com
www.soloswiss.com
Conveyor belt furnace for little parts of textile machines
REF. TXF9131
Furnace type: SOLO Swiss 322-10/100C
Process: Brazing
Sector: Textile
Country: Tunisia
Technical data
Working Temp.: 1150 °C
Working zone: width 100 mm x height 40 mm x length 1000 mm
Heating power: 10 kW
Atmospheres: H2 + N2 or cracked ammonia NH3
Advantages
No decarburization, no carburization, no scaling, no discoloration or tinting by oxidation
Uniform high hardness, full resistance to tempering
Absolutely bright surfaces: parts do not pass through flames at the exit: Pickling and blasting eliminated
Mild heating: lower stresses, minimized distortion
Constant processing times: always uniform and reproducible results
No poisonous salts, gasses or vapors: no air or water pollution problems, pleasant working conditions
Heating elements exchangeable whilst furnace at temperature: down-times minimized
Genuine modular design: easily adaptable to all production conditions and requirements