Transcript of "Home Internet Access Installation and Use January 2003 ..."
Home Internet Access Installation
For Macintosh Classic
Minimum hardware Requirements:
PowerPC processor, 32 MB physical RAM
For help and information, contact the Computer Services’ Help Desk at
Updated 16Jan03 1
LCC Home Internet Access for Macintosh Classic
To setup this software you must determine your OS version. To do so, start your com-
puter and go to the colored apple in the upper left corner of your screen, and down to
About This Computer or Macintosh. In the upper right corner of the opened window, it
will show the OS version. You must be running OS 8.5.1 through 9.2.2 to use LCC
Home Internet. Minimum hardware requirements: G3 or better with 64 MB RAM and 4
GB Hard Drive.
Setting up LCC Home Internet
Go to the Apple in the top left corner of your screen, come down to Control Panels, over
to Remote Access and let go. Enter your LCC Home Internet user name (not your
GroupWise name) in the name box and your assigned password (eight jumbled letters,
all lower case) in the password box. Check the box to save the password. Enter the
phone number as 463-4737.
Go to File and Quit. When prompted to save the changes, do so.
Again, go to the Apple in the top left corner of your screen (Apple Menu), pull down to
"Control Panels" and let go. You should now have the "Control Panels" window open.
Click once on the Remote Access control panel, then go to "File" and "Make Alias". You
will now have a "Remote Access" alias. Move this alias to the desktop. You will initiate
your LCC Home Internet session with this icon.
You may want to use a similar process to create an alias for your browser as well.
Setting Up Your Browser
You can use Netscape Communicator (4.7 or later) or Internet Explorer (5.0 or later)
with Lane’s WebMail. Explorer will give you multiple warnings about security, and will
continue to do so. With Netscape, you are presented with only one warning each ses-
If you have just installed Netscape, this section covers setting it up for the first time.
Double-click the icon you created on the desktop. Click the “Connect” button. When you
have connected, launch Netscape. You will be presented with the New profile window.
Profile Name should be your full name
Your email address should be your internet address (e.g. email@example.com)
The outgoing mail server is: mailhost.campus.lanecc.edu
Leave the mail server user name blank
Bypass the incoming mail server
Do not import any mail settings
Go to the Menu Item “Edit” and come down to preferences. On the right side is an area
to set your default home page. Enter http://www.lanecc.edu as shown below.
Click the “OK” button, and then click the “Home” button. The LCC Home Page should
No setup is required with Internet Explorer, but if you want to be able to email from
within your browser, you may have to setup Outlook Express. You will be responsible
for this setup as this is beyond the support provided by Computer Services
Setting up GroupWise WebMail
Once online and at Lane’s Home page, scroll about two-thirds of the way down the
page and click on the "GroupWise Email" link, to the left of the "Search" box.
You will be presented with a series of five windows having to do with our web site’s
security certificate. In the first window, click the “Next” button. Click “Next’ in the second
window. In the third window, select the option to accept the certificate forever then click
“Next”. Click “Next” on the fourth screen and “Finish” on the last screen.
You will not have to repeat the last five screens again. You will be presented with one
more certificate message and you should click the continue button. You will have to do
this each time you login to Banyan Intranet Connect. When at the Login Page, book-
mark it to avoid having to retype the address each time. Help with GroupWise WebMail
is available on Computer Services web page. http://www.lanecc.edu/cs/webcomp1.htm
There is no setup, but you have to OK five to eight security warnings before you get to
your mail (each time).
Using LCC Home Internet
Double-click on the LCC Remote icon on your desktop or go to the “Remote Access”
Click the connect button. Do not change any information in the dialup window.
It has been entered for you.
Wait for the connection process to complete. It will report connection established.
To Use Mail
Double-click the browser icon on your desktop or in your browser folder
Go to Bookmarks and let go on the Novell WebMail link or Lane’s Home Page and click
the Email link
OK the certificate message
Enter your GroupWise user name and password
Click the OK button
Read your mail
When done, click the little door with the arrow on the left side of the window to Log Out
Go to File and Quit your browser
To Disconnect from the College
Click on the disconnect button in the open dial-up window or go back to the “PPP/
Remote Access” control panel and then click on the disconnect button.