AMU-500 Manual

375 views

Published on

0 Comments
0 Likes
Statistics
Notes
  • Be the first to comment

  • Be the first to like this

No Downloads
Views
Total views
375
On SlideShare
0
From Embeds
0
Number of Embeds
2
Actions
Shares
0
Downloads
2
Comments
0
Likes
0
Embeds 0
No embeds

No notes for slide

AMU-500 Manual

  1. 1. ATake Co., Ltd. Thank you for buying our USB interface LASER office mouse! Please read this user’s guide before installing, setting up, or operating your new mouse. Features: New LASER technology provides 20 times as sensitive as normal optical mouse, no more mechanical movement parts to clean. Easy High Speed Sensitivity Switching between 800 DPI and 1600 DPI by pressing left and right buttons for 3 seconds and release them at the same time. Superior Response Time with an always-on laser that delivers near-zero-lag response time. 3 buttons with scroll wheel allows the end user to define actions. Works perfectly both on glass and on the smooth surface. USB interface. Specifications: Model No. AMN-500 Interface USB Working Voltage 4.5 ~ 5.5V Working Current Less than 50mA Resolution 800DPI / 1600DPI Laser Standard Class 1; 506µW Cable Length 1500±50mm Number of switch 3 buttons + Scrolling Wheel Dimension (LxWxH) 111.0X61.6X38.3 ±2mm Weight 90.6 ±3g System Requirements: Windows 98SE/2000/ME/XP/Vista Macintosh 10.4 or later Processor 233-MHz or faster Available USB port Supplied with the product: 1 USB Laser Mouse 1 User Manual ATake Co., Ltd. ♦ 7F., No. 123, Li-de Street, Jhonghe City, Taipei Country 235, Taiwan ♦ WWW.ATAKE.COM 886 2 2221 4999 ♦ sales@atake.com -1-
  2. 2. ATake Co., Ltd. Thank you for buying our USB interface LASER office mouse! Please read this user’s guide before installing, setting up, or operating your new mouse. To start using the Laser Mouse Installation 1. Turn off your computer 2. Connect the laser mouse to the computer’s USB port, depending on what connection it comes with. 3. Turn on your computer. 4. For Windows 2000/ME/NT/XP/Vista users, the hot keys will work automatically, so there is no need to install drivers. Note: 1. Under some versions of Windows 98 the system, the CD-ROM might be required during the driver installation. 2. This laser mouse is fully compatible with Windows 2000/ ME/ XP/ 2003. If you decide to connect the mouse to a different port on your computer, you may need to reinstall the driver. Sensitivity Settings This laser mouse provides 2 resolutions of 800 and 1600 dpi for different conditions. Just simply press left and right buttons for 3 seconds and release it at the same time to switch between 800 and 1600 dpi for office documentation or gaming environments. Caring for your Mouse Use and store the mouse only in room temperature environments. Don not use the mouse on surfaces made of glass, black velvet, or mirror as these surfaces may disrupt function. Keep the mouse dry; if it gets wet, wipe it dry immediately. Keep the mouse away from dust and dirt, and wipe it with a damp cloth. Do not modify or tamper with your mouse’s internal components. It may cause a malfunction and invalidate its warranty. Handle the mouse carefully; do not drop it. Class 1 Laser Product This device uses a laser light beam and is classified as a CLASS 1 laser product. Do not attempt to disassemble this unit. Do not attempt to disassemble this unit. Laser rays from the optical pickup are dangerous to the eyes. ATake Co., Ltd. ♦ 7F., No. 123, Li-de Street, Jhonghe City, Taipei Country 235, Taiwan ♦ WWW.ATAKE.COM 886 2 2221 4999 ♦ sales@atake.com -2-
  3. 3. ATake Co., Ltd. Thank you for buying our USB interface LASER office mouse! Please read this user’s guide before installing, setting up, or operating your new mouse. Danger. Visible and invisible laser radiation is possible if open or if the interlock fails or is defeated. Avoid direct exposure to the beam. Caution. There are no user-serviceable parts inside this unit. Do not open the top cover. Make sure that pins or other foreign objects do not get inside the mouse. Only a qualified service person should remove the cover or attempt to service this device due to possible eye injury. RF Emissions Information This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult your local ATake store or an experience radio/TV technician for help. If you cannot eliminate the interference, the FCC requires that you stop using your laser mouse. Changes or modifications not expressly approved by ATake may cause interference and void the user’s authority to operate the equipment. FCC DECLARATION OF CONFORMITY This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Limited 180-Day Warranty This product is warranted by ATake against manufacturing defects in material and workmanship under normal use for 180 days from the date of purchase from ATake company-owned stores and authorized ATake agents and dealers. For complete warranty details and exclusions, check with your local stores. ATake Co., Ltd. ♦ 7F., No. 123, Li-de Street, Jhonghe City, Taipei Country 235, Taiwan ♦ WWW.ATAKE.COM 886 2 2221 4999 ♦ sales@atake.com -3-
  4. 4. ATake Co., Ltd. Thank you for buying our USB interface LASER office mouse! Please read this user’s guide before installing, setting up, or operating your new mouse. Troubleshooting My wired laser mouse just stopped moving. One accidental kick or tug can pull a mouse connector out of its port or leave it partially inserted. If your mouse connects via a USB port, go ahead and reseat the plug. However, if your mouse connects to a PS/2 (Personal System/2) or serial port, shut down the computer before you reconnect it. Hot-plugging a PS/2 or serial connector can damage your computer or mouse, and the computer usually won’t detect the newly reconnected mouse. Before you restart, check that the mouse’s cord doesn’t have any cuts that may impede the signal. Evenly insert the plug until it securely connects to the port. If you’re using an adapter or third-party device such as a KVM (keyboard video mouse) switch or USB hub, remove the device and directly connect the mouse to its appropriate port. I connected my mouse to a different port, and now it doesn’t work. That particular port may be defective. You can test it by connecting another known good device that uses the same port. If the second device won’t work, that port may be bad and you’ll need to connect the mouse to another port or troubleshoot the port. Check your user’s manual for the types of ports and adapters your mouse supports. For example, a mouse that’s USB-only won’t work when connected via a PS/2 adapter to your computer’s PS/2 mouse port. I installed a new mouse, but Windows won’t recognize it. If you didn't uninstall the previous mouse, it may be causing a hardware or device driver conflict. Windows Device Manager can identify hardware conflicts and device driver problems, as well as remove problem devices from your computer. You can either connect the previous mouse or use your keyboard to open and view the Device Manager. Press the Windows key to bring up the Start menu. Use the arrow keys to highlight Settings and Control Panel and then press ENTER. Select the System icon, press ENTER, and use the arrow keys to select the Hardware tab. Press TAB until you select the Device Manager button and press ENTER. Press TAB and press the Down arrow key until the Mouse icon is highlighted. Use the Right arrow key to display the installed mouse. An exclamation point indicates that a mouse has a driver conflict. My optical or laser mouse works poorly unless I set it on a mouse pad. The type of surface an optical or laser mouse sets on can severely affect its tracking ability. Optical mice detect patterns in an image by using an LED (light-emitting diode) to reflect images back to the mouse’s DSP (digital signal processor). The optical sensors may have trouble on surfaces that are see-through, highly reflective, or on unreflective material such as dark cloth or leather because the sensor cannot accurately read patterns in the changes of reflected light. Wooden desks that have reflective grooves can cause your cursor to jump across the screen because the angled grooves inaccurately reflect light back into the mouse’s sensor. Laser mice work in a similar fashion, but the laser beam returns a high-resolution image that allows laser mice to sense movement on all but the most reflective surfaces. Windows is a registered trademark of Microsoft Corporation. Macintosh is a registered trademark of Apple Computer Inc. All other trademarks are the property of their respective owners. Features and specifications are typical; actual product may vary from the images found in this document. Specifications are subject to change and improvement without notice. © 2008, ATake Co., Ltd. ATake Co., Ltd. ♦ 7F., No. 123, Li-de Street, Jhonghe City, Taipei Country 235, Taiwan ♦ WWW.ATAKE.COM 886 2 2221 4999 ♦ sales@atake.com -4-

×