Your SlideShare is downloading. ×
Product Overview.doc
Upcoming SlideShare
Loading in...5
×

Thanks for flagging this SlideShare!

Oops! An error has occurred.

×

Introducing the official SlideShare app

Stunning, full-screen experience for iPhone and Android

Text the download link to your phone

Standard text messaging rates apply

Product Overview.doc

475
views

Published on


0 Comments
1 Like
Statistics
Notes
  • Be the first to comment

No Downloads
Views
Total Views
475
On Slideshare
0
From Embeds
0
Number of Embeds
0
Actions
Shares
0
Downloads
14
Comments
0
Likes
1
Embeds 0
No embeds

Report content
Flagged as inappropriate Flag as inappropriate
Flag as inappropriate

Select your reason for flagging this presentation as inappropriate.

Cancel
No notes for slide

Transcript

  • 1. User Manual Mobile Digital Video Recorder NOTICE
  • 2. The information in this manual was current when published. The manufacturer reserves the right to revise and improve its products. All specifications are therefore subject to change without any notice. The purpose of this manual is to kindly aid the user in the installation of the CMS software. The user should have a basic understanding of computer operation and basic knowledge of how to connect peripherals and make some settings. This manual is not intended to train the operation for CMS, Please refer to the Users Manual for CMS operation (B1-CMS-GUI-0-08-A) for the CMS operation information Copyright Under copyright laws, the content of this manual may not be copied, photocopied, reproduced, translated or reduced to any electronic medium or machine- readable form, in whole or in part, without prior written consent of SecuMaster Technology Co., Ltd ©Copyright 2005-2008, SecuMaster Technology, Co., Ltd Environmental Conditions Have a MDVR from SecuMaster working fine with CMS software Have a PC with Windows XP (We strongly recommend XP) and make sure that the PC can go online by WAN. SQL Server. Please install SQL server before install CMS program CMS installation program Correct MDVR setting to make sure CMS can work fine. Page 2, total 43
  • 3. Table of Contents 1.Product Overview...................................................................................................................... 3 1.1Product Views.........................................................................................................................3 2 Installation Guideline................................................................................................................6 2.1Front panel............................................................................................................................... 6 6 2.2Rear Panel...............................................................................................................................7 2.3 Remote Controller.................................................................................................................7 3. System Start-up and login.....................................................................................................10 3.1 System Start-up.................................................................................................................10 3.2 System Login....................................................................................................................11 4. MDVR System Layout..........................................................................................................11 4.1 System Management........................................................................................................12 4.2 Setup................................................................................................................................16 4.3 Playback............................................................................................................................34 4.4 Event Search.....................................................................................................................36 4.5 System information...........................................................................................................38 5.Basic Working Parameter......................................................................................................40 6.Appearance and interface......................................................................................................41 7.Unit Wiring...............................................................................................................................42 1. Product Overview 1.1 Product Views The mobile DVR is a device which special designed for vehicle surveillance with CIF/HD1 resolution. It adopt to the high speed processor and embedded operation system, intergreated with the latest H.264 video compression/ decompression technology in IT field, network technology and GPS navigation technology. It can do Center monitoring with alarm 、 remote monitoring and playback analysis based on center database. The appearance is very concision、anti high temperature, vibration absorber, flexible installation, strong function, and the system runs very stable. 1.2 Product features 1) Recording Support 1 channel live view H.264 record and 1 channel audio record; Movable HDD storage to read data, The recording definition is CIF/HD1, Page 3, total 43
  • 4. Automatic adjust the recording data according to the sensor info to save HDD space. The playback function supports sensor searching playback, 2) Metadata Support 6 sensors input interface, 2 RS485 interface, 3 RS232 interface, Collect most sensors data of the vehicle, including temperature, speed, brake, back a car etc, and can adjust recording data size. User can search the recording files easily according to metadata. 3) Wireless network function Supports broadband or narrowband application, and can upload the live view, Upload single channel and more channels video’s corresponding frame according to bandwidth limitation, Support CDMA/EDGE/GPRS wirless network application. 1.3 Specification Item Description Parameter OS language Chinese/English System Operation interface OSD GUI Password control User password, admin password Video Iput 1 channel composite input 1.0Vp-p,75Ω BNC 1 channel. Composite video output 1.0Vp- Video Otput p,75Ω BNC Video Video display Single video display PAL system 25F/S CCIR625 Lines 50 Hz Video standard NTSC system 30F/S CCIR525 Lines 60 Hz Audio input Single audio input 600Ω BNC Audio output Single audio output 600Ω BNC  Audio BaBasic output power level 1V – 2V Recording type Audio and video synchronized Audio compress ADPCM Page 4, total 43
  • 5. Video compress H.264 VBR/ CBR Video format CIF/HD1 Video streaming ISO14496-10 standard Video process Audio streaming ADPCM and storage standard CIF: 256Kbps ~ 1.5Mbps 8 grade video Video quality optional 1grade is the best. streaming(kbps) HD1: 600Kbps ~ 2.5Mbps 8 grade video quality optional 1 grade is the best Audio streaming 4Kbytes/s Storage SATA HDD up to 500GB Each channel up to 192 detection zone, Motion detection sensitivity adjustable Alarm Alarm input Can config 4~6 power level input Alarm output Can config 2~4 power level output Serial interface Supports 3 RS232 interface Corresponding Serial interface Supports 2 RS485 interface interface Network interface RJ45 10M/100M auto adapt network interface CDMA Built-in CDMA module optional Wireless EDGE Built-in EDGE module optional correspond GPRS Built-in GPRS module optional Built-in GPS navigation module, GPS info were encoded streaming, it can GPS be wireless upload. Playback video files and analysis the vehicle PC playback analysis info Matchable Live view video by wireless network, software GPS information upload, CMS alarm upload and center command sending, parameter configuration etc. Upgrade USB upgrade, HDD upgrade Power input +8V ~ +36V Power output +12V@2A;+5V@2A The others Working temperature -25----60℃ Working humidity Weight Page 5, total 43
  • 6. 2 Installation Guideline 2.1 Front panel 1. LED indicator lights and status index: 【POWER】Power input status: LED ON confirms that unit is power supplied. 【U DISK】U driver indicator LED: LED ON—U driver in device, LED OFF —means no U driver. 【REC】Video recording status LED: LED ON indicates recording is on. 【VIDEO】Video loss LED: LED ON indicates video input well. LED OFF indicates video loss. 【ERR】Disk faults LED: LED is on-HDD is working wrong; LED is off-HDD is working well. 【SD】For future use, No action now. 2. IR : Remote control IR receiver. 3. DEBUG: Serial port debugging. 4. MCU: MCU upgrading interface 5. USB: U driver and data transfer interface. 6. AUDIO OUT: Audio output 7. VEDIO OUT: Vedio output. Page 6, total 43
  • 7. 2.2 Rear Panel 1. RJ45: Network card interface 2. RS232: Expand serial 3. RS485 I/O: Expand serial 4. A/V : Audio/video input and output interface 5. POWER: External 12V power supply ( Red cable connect with + , the black cable connect with —, the yellow cable connect with signal cable, three cables must be connected) 6. GPS: GPS antenna port 7. CDMA: CDMA antenna port 2.3 Remote Controller Page 7, total 43
  • 8. Number keys: Use the numbers to input values in the system setup. Navigation Arrows : Use the ARROW to move between selections, input fields and icons. Press Enter to select and EXIT to return. Each MDVR includes a handheld Infra-Red(IR) controller that allows the user to transmit commands to recording module and display on screen control menu on a composite monitor. Remote control key and function introduction: 1. Number keys: 【0-9】keys:During setup, number keys are used to input values. For viewing channels 1,2,3 and 4, use 1,2,3 and 4 on numeric keypad respectively. 【+】 【-】 、 keys:During setup, plus and minus are used to select next or previous values. Page 8, total 43
  • 9. 2. Setup menu navigation: ▲, : Up, Down directional keys: Move selection up and down in setup menu. , : Left, Right directional keys: Move cusor left or right in setup menu. 【Enter】key: During setup, select and save entry During Playback and preview, displays the channel name, text number, driver name, event sensor item and time, year/month/date, time, GPRS/GPS info. on the screen. 3. PTZ(Lens)function control keys 【ZOOM+】、【ZOOM-】:Zoom in/out 【APERTURE+】、【APERTURE-】:IRIS control 【FOCUS +】、【FOCUS-】:Focus in/out 【AUTO】:Auto run with the PTZ pattern 【RECALL】:Recall the set program 【PRESET】:Preset default position 【SWITCH】:To control the brush、lamplight and so on assistant relays. 4. Play function keys 【PLAY】:Starts/Resumes playback from any other mode (FF, RR, Frame by Frame etc) 【SLOW】:Reduces playback speed to 1/2X、1/4X、1/8X、1/16X mode. Press PLAY to return to normal playback speed. 【PAUSE/STEP】:Freezes playback to single frame and can advance one frame at a time. To advance the frame press Pause/Step to move frame by frame. Press EXIT to return to normal playback speed. 【FWD】 Fast forward the video while playback.X1, X2, X3, X4 modes available. PressFWD : to switch, press 【PLAY】to return to normal speed; 【REV】: Reverse the video while playback, 1X,2X,3X,4X four modes are available. Press REW to switch, press【PLAY】 to return to normal speed; 5. The other function keys: 【POWER ON】 Reset the MDVR to Power on and Power off mode. (standby and start up); : 【LOGIN/LOCK】: If the security is enabled in the setup, use LOGIN/LOCK key to enter the user setup. It is important to remember the password due to without restoration function. Log in ( to enter into “User ID select” and “Password” input interface)and lock functions(To exit setup and operation); Page 9, total 43
  • 10. 【QUAD】: Switch between preview and playback; 【PARAMETER】:No function; 【ANALOG】:To adjust the brightness、contrast、chroma、 sensitive of motion detection the when at single channel live view,cooperate with 【+】 【-】 to adjust the 、 parameters; 【EXIT】: Exit to the preview or return to the last menu; 【CF】:To operate CF card when the system with CF card; 【LANGUAGE】:When set the channel name uder the record setting interfac,press this key switch input language of Chinese or English; 【RECORD】:Start manual record; 【STOP】: Stop manual record; 【SETUP】:Enter into setup interface and setup the system parameters; 【F1】:Choose time play of record video; 【F2】:PTZ control,press this key to enter into PTZ control interface when at single live view; 【F3】, 【F4】, 【CHECK】, 【NET】:no use at preset. 3. System Start-up and login 3.1 System Start-up MDVR is in standby status after connecting the MDVR power cable to vehicle DC 12V power supply, MDVR start up is subject to the setup of user. (Please see the details in the Page 10, total 43
  • 11. GERNERAL and RECORD of Setup). Normally the vehicle can supply power to MDVR when Ignition is ON or vehicle with laden, the following is the sign of MDVR is power on. When Video out display customer’s LOGO or Setup interface. If vehicle’s power is not off, MDVR record signal is continue, if vehicle power is off, MDVR still can keep working. 3.2 System Login 1) When Password is set disable, press 【Login/Lock】key, then will appear the following interface, input Unit ID and User Name to enter system main menu. 2) When Password is set enable, Press 【Login/Lock】key, then will appear the following interface, input Unit ID, User name and Password to enter system main menu.  Unit ID:The default is 20008  User Name:User can check the record file、sensor menu data only;Admin has the all authorities to operate the all functions;(The default is Admin, press 【Enter】 to switch from general user and admin)  Password:Default admin password is 000000,Default user password is 888888 4. MDVR System Layout Press 【 Login 】 on the IR controller, then login to the system the on-screen menu will be displayed:  Navigate through the option using the ARROW keys.  Select the desired option using 【Enter】key(The system will continue record when users enter into selected item, only when users select playback or modify relevant Page 11, total 43
  • 12. record parameters, then the system will stop record);  To turn to the previous menu from any screen use 【Exit】key 4.1 System Management To use the direction key to select and press【Enter】key,to enter into the management menu which including the system parameter setup. 4.1.1 File Operation The main function is to copy and delete the recording files. The search File search menu display the current month record information, the date with white color means this day with recording file. To search the recording files by the number keys and direction keys on the remote control:  Type:Press【Enter】 to select the searching way:All/Alarm/Motion detection/Power Page 12, total 43
  • 13. on/Manual/Timer。  “(Year)”: The range is 2000~2099,to press number keys to enter.  “(Month)”: The range is 01~12,to input the relevant month to search.  “(Date)”: The range is 01~31,to input the relevant date to search.  “(Hour)”: The range is 00~23,to input the relevant hour to search.  “(Minute)”: The range is 00-59,to input the exact time to search. After inputting the exact start time, move the cursor to “search” button and press 【Enter】to enter into the recording file lists interface: Page 13, total 43
  • 14. To select the recording file by direction keys or【+】 -】 and press Enter】 、 【 , 【 means selected OK(There is a blue dot at the front of the selected recording files)and press【Enter】again the blue dot will disappear that means cancel the select, we can export and delete the recording files after selecting, and press【Exit】to return to the last menu. 4.1.2 Shortcut To be used to copy different types of files. To move the cursor to the relevant option and press【Enter】 the selected option will show a , blue dot at the front, then “Apply”, the selected files will be copy to the USB storage. Page 14, total 43
  • 15. 4.1.3 Format: External device:To select an external device by press 【Enter】to switch , after selecting “External device”, press 【Enter】 to confirm, then will pop up a dialog for selecting “Apply” or “Cancel” to Format. Page 15, total 43
  • 16. 4.2 Setup To press direction keys to select and press【Enter】 when you enter into setup menu , and revise the relevant recording parameters, the system will stop all record, and the setup menu including the system parameter setup. 4.2.1 GENERAL  Press【Enter】to change system setup inforamtion.  To move the cursor to the GENERAL setup and the left column is the GENERAL setup sub-menu.  To move down direction key to sub-menu.  To move the cursor by pressing the up and down direction keys and select the relevant sub-menu, cursor rightward to enter into the sub-menu and select the options to do settings.  Move cursor to APPLY and press Enter】 will save the settings, press 【 key 【Exit】 back will to submenu of GENERAL.  If not press【Enter】key and exit, then the modified setting will not been saved. The GENERAL menu consists of six tabs. Each tab is designed to facilitate the performance adjustments preferred by the user. 1) Date/Time: Page 16, total 43
  • 17. a) Date format:MM/DD/YYYY Press【Enter】to input. b) Current date:MM/DD/YYYY To input by number keys c) Current time:H/M/S To input by numberic keys. d) Sync mode:Manual/Auto Press【Enter】to switch. e) Sync type:NTP/GPS Press【Enter】to switch. f) NTP sync IP:Network service IP address. g) Sync time:H/M/S Number keys input h) Current time zone:GMT+Number Press【Enter】to input. The behind four options get grey when sync mode is manual. Page 17, total 43
  • 18. 2) General: a) Time Mode: ignition/(Time&ignition)/(Time︱Ignition)/Timer, press 【Enter】 key to switch each mode When MDVR in standby status, user setting Time Mode as following:  Ignition: MDVR will be startup/shutdown according to ignition signal.  Timer: MDVR will be startup/shut down at a specific time.  Time&Ignition: MDVR will be startup when ignition on time is same as Startup Time setting, and MDVR will shutdown when ignition off time is same as Shutdown Time setting.  Time︱ Ignition MDVR will start up at Startup Time setting or ignition is on, and MDVR will shutdown at Shutdown Time setting or ignition is off. b) Startup Time: H/M/S Enter with number keys c) Shutdown Time: H/M/S Enter with number keys While use Timer to start up/shutdown MDVR, the time setting rules as following:  When Startup Time is less than Shutdown Time, device start up time is between Startup Time and Shutdown Time.  When Shutdown Time less than Startup Time, device shutdown time is between Shutdown Time and Startup Time. (MDVR startup time is at first day, then shutdown time will be at second day.) d) Shutdown Delay: range is 5~300 minutes, enter with number keys. Allow the system Page 18, total 43
  • 19. continous running when vehicle turn off (ignition signal OFF), after Delay off time, it will shutdown automatically. e) Idle Time: Range is 30~1800 seconds, enter with number keys. when user enter GUI interface, it will be back to preview screen when no operation during this time. f) System Maintenance: On/Off press 【Enter】 to switch 3) System ID a) Unit ID: Use the Numberic keypad to enter the unit ID between 00000 -99999, this ID is used when logging in to the unit (if security is enabled). b) The Company Name, Vehicle No. and Driver Name, press 【Enter 】, enter into keypad interface to input corresponding names. Page 19, total 43
  • 20. 1. Input: Use ARROW key to select the option to input. 2. Type: Chinese, English, Number, press 【Language】 key to switch Page 20, total 43
  • 21. 4) Security: Press 【Enter】 to select On or Off, import password with number keys.  Password  ON: need to input password to login.  Off: Input Unit ID and user name only to access Menu interface, no need to input password.  User Password Correct indicates permission is limited to video, sensor menu. Admin Password correct indicates full access to all Menu of MDVR. No password or simply password will effect not convenient to manage MDVR. Page 21, total 43
  • 22. 5) Default operation  Default Setting: Press【Enter】 to switch between”cancel” and “Apply”, Selecting”Apply” will restore the default factory settings.  Export setting: Press 【Enter】 key will export device configuration file” config.dvr” to U disk root of directory.  Import setting: Press 【Enter】 will import configuration file” config.dvr” from U disk or HDD, and effected. Page 22, total 43
  • 23. 6) Update: Copy update file to U disk, and insert U disk to USB interface, Press 【Enter】key when cursor move to “system upgrade”, then system will be upgraded automatically, then device will be reboot automatically after MDVR updating success. 4.2.2 RECORD setup Press 【Enter】key access to system setup menu. Left column will shows submenu of RECORD when move cursor to Record setup.  Press Right ARROW key to enter record menu. Press Down ARROW key to enter submenu of Record. Press Right Arrow key to switch to the data entry area. Press the Up or Down Arrow key to scroll through the entry fields Press the Enter key to change the value or use the numeric keypad on the handheld controller for data entry areas where the numeric values are used. To save the changes, scroll to APPLY at the bottom screen and press ENTER. Press Exit to quit without saving changes. The RECORD menu consists of four tabs. 1) Record setup Page 23, total 43
  • 24. Page 24, total 43
  • 25. a) Time insert: On/Off, press 【Enter】 key to input b) File record size: 15/30/45/60 minutes, press 【Enter】 to input. c) Storage overwrite: On/Off, press 【Enter】key to inport d) Record mode: Ignition/Con/Manual/Alarm, press 【Enter】 to input. e) Startup detection: On/Off, press 【Enter】key to import Function: while at Record Mode, chosen” ON”, device will be at “standby” status, when at specific time for recording(set at schedule), then device will be record, and will be shutdown automatically after finishing record task. f) Priority Record: On/Off, press 【Enter】key to input. g) Pre-recording: On/Off, press 【Enter】 to input. h) Duration: range is 1~60 minutes, enter with numberic keys i) Record delay: 30~3600 second, enter with number keys. j) Video System: PAL/NTSC, press 【Enter】to input k) Lock save mode: user setup /Manual, Press 【Enter】to input l) Lock save time: range is 2~60 days, enter with numberic keys 2) Channel setup Page 25, total 43
  • 26.  Name: Press 【Enter】 key to enter keypad, same as System ID setting.  Qua. : Press 【Enter】key to select quality of record image, range is 1~8 level, “1” is for the highest quality record image, and 8 for normal quality image.  Res: select between HD1 and CIF: HD1: Resolution at 720x240(NTSC), 704x288(PAL). CIF: Resolution at 360x240(NTSC), 352x288(PAL).  Fra: Press【Enter】to select frame rate ( frame per second)  Frame per second: 1~30 fps  Aud.: Press 【Enter】 to choice if each channel need to record audio On: Need to record audio, Off: No need to record audio.  Rec: On/Off press 【Enter】to input.  Liveview  On: The camera allowed to liveview on screen. OFF. The camera not allowed to liveview on screen, only show currect interface, or back to login in screen when press”EXIT”.  Dual Encode:  ON: Allow to view monitoring screen at remote network monitor terminal  OFF: Not allow to view mornitoring screen at remote network monitor terminal. Page 26, total 43
  • 27.  Resolution for transmission: network transmission format, select between CIF and QCIF, press 【Enter】key to input. 3) Alarm setup Parameter setup is same as channel settings. Function: when occur alarm event, MDVR will record according this setting. 4) Schedule Page 27, total 43
  • 28. When Record mode is setup as “Con”, need to setup schedule, user can setup the record time schedule as you wish, max can setup SIX periods per day. Type: Con, Event,Alarm, MD,BD Press 【Enter】 to input  Con. Record is subject to time period and Startup/Shutdown Time setting, it is belong to normal record.  Event subject to time period and Startup/Shutdown Time, when event triggerred, the event log will be recorded.  Alarm record won’t subject to Time period and Startup/Shutdown Time, when alarm is triggered, will record alarm video, when Pre-recording and Duration is setting, will create record log.  MD and BD are subject to Time period and Startup/Shutdown Time setting, when detect motion and block, will trigger video record.  Schedule has 9 items, each item for one day, and each item support two periods  Each item can be set as two unrepeatable period of time.  Every day: with effect to one week (seven days), and cannot be repeated with other 8 items of time period settings.  Workday: with effect to working days schedule, cannot repeat with other working days schedule setting. Setup Workday start and end day as you wish, and press 【Enter】 to input. Each period time enter with numberic keys, move cursor to specified time period, and then Page 28, total 43
  • 29. enter with number keys, Period1 setting for first period of anyday of video record, Period2 setting for second period of anyday of video record. When setup as 00:00---23:59, it means 24 hours video record. 4.2.3 NETWORK setup To move the cursor to the NETWORK setup and the left column is the NETWORK sub- menu. To move the cursor by pressing the up and down direction keys and select the relevant sub-menu, cursor rightward to enter into the sub-menu and select the options to do settings. Move cursor to APPLY and press Enter】 will save the settings, press【Exit】 back to 【 key will submenu of GENERAL. If not press【Enter】key and exit, then the modified setting will not been saved. 1) Local IP address Page 29, total 43
  • 30. IP address: move cursor to this option, Enter with number keys, the static IP address of MDVR, it is used for update media server. Mask: Move cursor to this option. Enter the subnet mask of MDVR. Gateway: Enter the gateway of MDVR MAC address: it is static, cannot be modified. 2)CMS server: cannot support right now. Page 30, total 43
  • 31.  CMS IP: The IP address of CMS.  CMS port: CMS listen port, when connect with CMS server, this port setting must be same as CMS server listen port.  Media Port: CMS server listen port, when connect with CMS, this setting must be same as CMS media listen port. 4.2.4 ALARM Press 【Enter】 key to enter system setup menu. Move cursor to ALARM, the left volumn will shows submenu of ALARM Enter the sunmenu is same as General setting. ALARM is consist of two tabs.. 1) Sensor Page 31, total 43
  • 32.  Name: Connect 6 inputs of sensors S1~S6, user can defines their name Press 【Enter】 key, then access into keypad interface. Page 32, total 43
  • 33.  Enable : ON/OFF Press 【Enter】 key to input Funtion: when Enable is Off, then the sensors signals will not be collected.  Type: Alarm/Event Press 【Enter】 key to input. Alarm: Trigger alarm video record and alarm log. Event: When occur event, will no record video, only record LOG when Enable is on.  PWL ON/OFF, press 【Enter】key to input  OFF: High Leve will trigger alarm  ON: Low Level will trigger alarm.  Lock: Yes/No press 【Enter】 key to input Function: lock record will not be delected automatically, the reserve time can be by user. 2) Speed Setup  Enable: On/Off press 【Enter】key to input.  Alarm/Event: press 【Enter】key to input  Lock: Yes/No, press 【Enter】key to input.  Unit: km/h or mil/h, press 【Enter】 to input  Current: The car current speed collected by GPS. Page 33, total 43
  • 34.  Prompt Limit: Enter with number keys, can be setup by user, the default setting is 80km/h.  Alarm Limit: Enter with number key, the default setting is 120km/h.  Doorswitch: Sensor detect interface for detecting door switch on/off.  D.O. max speed: Door on motion max speed. Enter with numberic key, can be setup by user, the default setting is 5km/h.  Acc. Limit: Acceleration Alarm, enter with number keys. 4.3 Playback Use Arrow key to select 【Enter】to accesss Playback menu,the following screen will pop up: The record search menu will show this monthe vide record information, the date with white color indicate this day with video record. Use ARROW keys and NUMBER keys to search video record.  Event Type: Press 【Enter】 to select search mode: All/ manual / Time /Alarm / MD/ Ignition. Page 34, total 43
  • 35.  Year: Range is 2000 to 2099, only the last 2 digits of the year are changeable (ex.:03 for 2003), also could press + -, enter key to increase and decrease digits.  Month: Range 01~12 for the corresponding month number, also could use +,- Enter key to increase and decrease digits.  Day: Range 01~31 for the corresponding day of the recording, also could use +,- Enter to increase and decrease digits.  Hour: Range 01~23 for the appriopriate hour to begin the search, also could use  Mintues: Range 00~59 to narrow the search, also could use to increase and decrease digits. After entering the start time move cursor to the “Start” and press”Enter” on the handheld IR controller. The recorded video history beginning at the time chosen will be listed on the screen. Use Arrow or 【+】 【-】 、 key to select the video want to view, Press 【Enter】 to play video file, and press 【EXIT】key to return to the previous Menu. Page 35, total 43
  • 36. 4.4 Event Search Move cursor to and press 【 Enter 】 key to access system information menu, the screen below will display: Page 36, total 43
  • 37. When search log information, them menu will display the information of record, the day with white color means that this day with log record. Use Arrow and number keys to search record data.  Type: Press 【Enter】key to select search way, all/sensor/operate/error/card  Sensor event means the signals collected by sensor.  Opearte event: to record users parameter modified operation.  Error&Alarm: Disk error or non-sensor colleted alarm event  Card event: Record the logs of card reader. Year: Range is 2000 to 2099, only the last 2 digits of the year are changeable(ex:03 for 2003), also could use .+ -,enter key to increase and decrease digits. Month: Range 01~12 for the corresponding month number,also could use +,- Enter key to increase and decrease digits.  Day: Range 01~31 for the corresponding day of the recording, also could use +,- Enter to increase and decrease digits.  Hour: Range 01~23 for the appriopriate hour to begin the search, also could use  Mintues: Range 00~59 to narrow the search, also could use to increase and decrease digits. After entering the start time move to the “Start” and press”Enter” on the handheld IR controller. The recorded video history beginning at the time chosen will be listed on the Page 37, total 43
  • 38. screen. Use ARROW Key to select the log file that want to view, press 【Enter】key to select the log file (there will show a blue dot before log file), and press 【Enter】again, the blue dot will disappear, means cancel the selected log file. After selecting log file, then can do export and playback operation, when the log file with video file, then can playback, press 【EXIT】key to return preview menu. 4.5 System information Move cursor to and then press 【Enter】key to access system information menu, the the below screen will be display: Page 38, total 43
  • 39.  Version: This is the device firmware version number, it including firmware interface information, media play type, software version No.  Memory information: It displays HDD capacity and the free spare of HDD.  GPS status: display if the device with or without GPS.  GPS signal status: it displays that if has GPS data currently.  Wirelss module: display if device have GPRS,CDMA/EDGE module.  SIM: display if with SIM card currently. Page 39, total 43
  • 40. 5.Basic Working Parameter Item Parameter Description Input voltage is +8V~+36V,when voltage is less than 8V Input Voltage 8—36V or more than 36V for a long term, then device will shutdown automatically and enter into protection mode. Output Voltage is 12V(+/- 200mV),Maximum current 12V(+/-0.2) is 2A。 Output Voltage is 5V(+/- 200mV),maximum current is Output Voltage 2A。 5V (+/-0.2) Output all with overcurrent protection, when output current is more than 1.2 tims of maximum setting for a long term, Output will be cut off acutomatically, andl will be recovered when load get right. 0—2V Ignition off Ignition signal 5—36V Ignition On Video input 75Ω Each channel video input impendance is 75Ω。 impendance Video output 900mV One channel outuput of 900 mV CVBS analog signals Audio output 12W Audio amplifier output maximum driven ability. power 0—2V Low voltage alarm I/O interface 5V above High voltage alarm RS232 port Reserved port, for expanding RS 232 device. RS485 port Reserved port, for expanding RS485 device. GPS interface connect with GPS antenna GPRS Connect with GPRS antenna. interface Ethernet port Standard RJ45 interface, with indicator light. HDD interface 1.Compatible with kinds of normal commercial U disk. USB interface 2.Hot swap, when device indicates file transfer finished, remove U disk will not damage video file data. working The working circumstance temperature at good ventilation -25----60℃ temperature condition Page 40, total 43
  • 41. 6. Appearance and interface P1 Overview——Movable HDD bay P2 Overview----The front Page 41, total 43
  • 42. 图1 P3 Overview----The rear 7. Unit Wiring Lable connecter Description Details Red connects with vehicle Red is positive wire, Three leads positive terminal of the battery. power input black is negative wire, vehicle power Black connects with vehicle connection cable Yellow is connect with supply connector negative terminal of the battery. vehicle ignition Yellow connects with。 Two RED wires, Red is output positive, +12V OUT Positive with special fuse. two black wires and black is negative V IN0—3 BNC connector Yellow Video input. CVBS OUT BNC connector Yellow Video output. A IN0—3 BNC connector Red Audio input L OUT BNC connector Red Audio output Green, Black is GND Alarm, Event input, each two ALARM IN1—6 alarm use one GND. Page 42, total 43
  • 43. ALARM OUT1--2 Blue, Black is GND Alarm, Event output. Yellow is 485-A RS485-1 and RS485-2 two RS485 White is 485-B group. Green is TX RS232 Yellow is RX Has A、B、C three group Black is GND +5V OUT Palm With special fuse. four leads wire GPS Black Connect with external GPS. square plug SMA Bulkhead GPRS antenna Straight Clamp Black Connect with GPRS port. Crimp Plug Page 43, total 43