New Products from  Cooper Crouse-Hinds  Commercial Products
PRE-formance™ THE Most Complete PRE-fab Offering Available <ul><li>Giving you the convenience of a pre-fabricated product ...
PRE-formance™  <ul><li>PRE-formance  “Basic” </li></ul><ul><ul><li>Consists of standard cataloged boxes with pre-installed...
PRE-formance™ <ul><li>PRE-formance  “Custom” </li></ul><ul><ul><li>PRE-formance custom is a Cafeteria Style Selection of  ...
Custom Examples
PRE-formance™ <ul><li>PRE-formance  “Complete” </li></ul><ul><ul><li>Is the most complete turn key solution for commercial...
PRE-formance™ <ul><li>PRE-formance  “Complete” </li></ul><ul><ul><li>PRE-formance Complete combines innovative and patente...
PRE-formance™ <ul><li>PRE-formance  “Complete” </li></ul><ul><ul><li>Job specific labeling included with every cable run i...
PRE-formance™ <ul><li>Some examples of PRE-formance  “Complete” include: </li></ul><ul><ul><li>Marriott Residence Inns </l...
HomeRunner™ <ul><li>The HomeRunner junction/pull box is another innovative addition that will change the way contractors t...
Series 5 additions <ul><li>New! </li></ul><ul><ul><li>Aluminum covers with integral gaskets </li></ul></ul><ul><ul><li>X a...
LBNEC Mogul Pull Elbows <ul><li>Cooper Crouse-Hinds mogul pulling elbows facilitate wire pulling in 90° bends to allow  ch...
Zinc Die Cast AC/MC Connectors <ul><li>Zinc die cast off-center set-screw type AC/MC connectors are used to terminate armo...
Stainless Steel Conduit Hangers <ul><li>Stainless steel conduit and pipe hangers provide mechanical support to conduit and...
Rigid Conduit Fittings <ul><li>Rigid Couplings </li></ul><ul><ul><li>Rigid conduit couplings are used to join two lengths ...
Commercial Hubs <ul><li>Cooper Crouse-Hinds new line of Commercial hubs (CHB series)  are available to provide a lower cos...
Gangable Masonry Boxes <ul><li>Used in masonry walls (brick, block etc) to mount devices, switches, GFCI’s etc. </li></ul>...
LiQuik™  Liquidtight Fittings  No Disassembly Required! <ul><li>Innovative Labor Saving Patent Pending Product – Unique to...
While-In-Use Weatherproof Covers  with Patented Movable Hinges! <ul><li>Rugged UV resistant polycarbonate cover and back p...
SmartGuard™ <ul><li>SmartGuard is a high impact, router resistant PVC patented protection plate designed by a former drywa...
MetalGuard™ <ul><li>MetalGuard™ protective plates protect commercial and residential electrical boxes and wiring from shee...
TP432VMS  <ul><li>TP432VMS is a 2 1/8” deep box with dedicated ¾” ko’s on the sides and integral bracket for direct attach...
Fan Rated Concrete Box <ul><li>Octagon concrete boxes are used in poured deck applications in high-rises, apartments, cond...
Commercial Products  <ul><li>Fiberglass Enclosures </li></ul><ul><ul><li>Wide range of options to meet any customer prefer...
Commercial Products  Steel Outlet Boxes -  New Product <ul><li>Patented Unimount™ Covers – NEW & Improved </li></ul><ul><u...
New & Improved Uni-Mount Design <ul><li>Uni-Mount ™ Covers </li></ul>Feature Feature Detail Benefit 1 Four Holes <ul><li>A...
Cooper Crouse-Hinds Contractor Corner Click On the Button on our Home Page Check back often to keep up to date on other ne...
Thank You!
Upcoming SlideShare
Loading in...5
×

New Product Presentation 2009 (15MB)

553

Published on

0 Comments
0 Likes
Statistics
Notes
  • Be the first to comment

  • Be the first to like this

No Downloads
Views
Total Views
553
On Slideshare
0
From Embeds
0
Number of Embeds
0
Actions
Shares
0
Downloads
15
Comments
0
Likes
0
Embeds 0
No embeds

No notes for slide
  • Typical Markets/Applications include Oil and gas, chemical, food &amp; beverage, waste water, marine, water parks, car washes, Department of Transportation applications This is a natural extensive of the CCH family. We have been in the enclosure &amp; the corrosion resistant businesses for decades!
  • New Product Presentation 2009 (15MB)

    1. 1. New Products from Cooper Crouse-Hinds Commercial Products
    2. 2. PRE-formance™ THE Most Complete PRE-fab Offering Available <ul><li>Giving you the convenience of a pre-fabricated product – plus the flexibility to accommodate job-site requirements </li></ul>
    3. 3. PRE-formance™ <ul><li>PRE-formance “Basic” </li></ul><ul><ul><li>Consists of standard cataloged boxes with pre-installed pigtails. </li></ul></ul><ul><ul><ul><li>A broad offering including 4” square shallow & deep boxes for use with conduit, MC cable or Romex, ceiling boxes, 4 11/16” square boxes and more… </li></ul></ul></ul><ul><li>PRE-formance Assemblies </li></ul><ul><ul><li>Includes commonly ordered assemblies of Patented Uni-Mount Covers, Kick-in brackets, slider brackets, or traditional box support brackets pre-assembled with 4” deep boxes or innovative “Open Back Boxes” with ground screws or clips and pigtail leads & SmartGuard™ protect plates </li></ul></ul>All Available For Immediate Shipment From Factory Stock or assembled from stock components to meet your tightest job schedule requirements!
    4. 4. PRE-formance™ <ul><li>PRE-formance “Custom” </li></ul><ul><ul><li>PRE-formance custom is a Cafeteria Style Selection of mounting brackets, boxes, and plaster rings; including a choice of solid or stranded ground pigtail already installed into the box </li></ul></ul><ul><ul><li>Custom assemblies can be provided with wiring devices, cable leads, fittings, and metallic or patented non-metallic SmartGuard™ protect plates </li></ul></ul><ul><ul><li>Capabilities of other ‘custom” features include special packaging, kitting, and painting. </li></ul></ul><ul><ul><li>Exactly What You Want, When You Want It, Where You Need It! </li></ul></ul>
    5. 5. Custom Examples
    6. 6. PRE-formance™ <ul><li>PRE-formance “Complete” </li></ul><ul><ul><li>Is the most complete turn key solution for commercial construction projects </li></ul></ul><ul><ul><li>Pre-formance complete is Ideal for hotels, condos, commercial and retail offices, apartments, hospitals and assisted living facilities </li></ul></ul><ul><ul><li>Utilizing the customers complete set of engineering electrical drawings “complete” systems are engineered and manufactured to meet project specific requirements for ease of field installations. </li></ul></ul><ul><ul><li>Material is engineered, manufactured and kitted to match your exact job and location requirements. </li></ul></ul>PRE-formance Complete is engineered & manufactured to your exact specifications saving you labor and material costs!
    7. 7. PRE-formance™ <ul><li>PRE-formance “Complete” </li></ul><ul><ul><li>PRE-formance Complete combines innovative and patented products- designed by contractors – for contractors to provide the simplest, most efficient “pre-fab” solution available. </li></ul></ul><ul><ul><li>Suitable for wood or steel stud construction, EMT or MC wiring, complete systems arrive custom engineered and manufactured to meet specific project requirements </li></ul></ul><ul><ul><li>The patent pending open back box process maximizes working area to reduce wiring time and speed up installation and also eliminates the need for disassembly on the job site. </li></ul></ul>Adjustable mud rings SmartGuard Uni-Mount Covers Universal Brackets Open Back Boxes
    8. 8. PRE-formance™ <ul><li>PRE-formance “Complete” </li></ul><ul><ul><li>Job specific labeling included with every cable run indicates starting & ending position, device type, mounting type, and even cable path reducing job site “engineering” – speeding up installation time- reducing time and labor. </li></ul></ul><ul><ul><li>Complete drawings created from submitted Autocad drawings simplify and speed up installation. Stripped of everything except the required electrical data, complete drawings provide quick and easy point to point reference. </li></ul></ul>
    9. 9. PRE-formance™ <ul><li>Some examples of PRE-formance “Complete” include: </li></ul><ul><ul><li>Marriott Residence Inns </li></ul></ul><ul><ul><li>Hilton Garden Inns </li></ul></ul><ul><ul><li>Hampton Suites </li></ul></ul><ul><ul><li>Candlewood Suites </li></ul></ul><ul><ul><li>Healthcare facilities </li></ul></ul><ul><ul><li>Condos </li></ul></ul><ul><ul><li>Day School </li></ul></ul>
    10. 10. HomeRunner™ <ul><li>The HomeRunner junction/pull box is another innovative addition that will change the way contractors think about wiring their projects.  </li></ul><ul><ul><li>HomeRunner is an 8 x 8 junction/pull box with a patented external clamping system that gives contractors all the features they need to save time, labor and money at the job site! </li></ul></ul><ul><ul><li>Large cubic capacity (177 cu. in.) gives room to run multiple circuits off of a single home-run cable. </li></ul></ul><ul><ul><li>Innovative, patented, labor-saving integral clamping system eliminates the need for contractors to punch holes in the enclosure and install fittings. </li></ul></ul><ul><ul><li>Suitable for use in high-rise hotels and in condominiums, where two large suites or condos can be fed from one HomeRunner box using a single large MC, MCI-A, or conduit home run. </li></ul></ul><ul><li>HomeRunner has numerous, unique features that solve real application problems and the flexibility for use in many types of construction projects. </li></ul><ul><ul><li>HomeRunner is truly an engineered solution! </li></ul></ul><ul><ul><li>Contractors will appreciate its flexibility and its features. </li></ul></ul>
    11. 11. Series 5 additions <ul><li>New! </li></ul><ul><ul><li>Aluminum covers with integral gaskets </li></ul></ul><ul><ul><li>X and TB configurations </li></ul></ul><ul><ul><li>SnapPack ™ with rigid bodies and integral gasketed covers! </li></ul></ul>The broadest, most complete offering of Copper Free aluminum conduit outlet bodies on the market! The only offering listed NEMA 4! (rigid body with integral gasketed cover).
    12. 12. LBNEC Mogul Pull Elbows <ul><li>Cooper Crouse-Hinds mogul pulling elbows facilitate wire pulling in 90° bends to allow changes in conductor direction. </li></ul><ul><li>The pulling elbows can also be used to allow conductor entrance into buildings. </li></ul><ul><li>With the smooth finish and large dome cover, wires can be easily pulled through without compromising the wire insulation. </li></ul><ul><li>The gasketed cover creates a raintight chamber and the copper-free aluminum construction provides increased corrosion resistance, making the mogul pulling elbow ideal for any outdoor application. </li></ul>Available in 1” - 4” trade sizes
    13. 13. Zinc Die Cast AC/MC Connectors <ul><li>Zinc die cast off-center set-screw type AC/MC connectors are used to terminate armored cable in a ½” KO in a box or enclosure. </li></ul><ul><li>These new connectors are listed for use with MC/AC and FMC and are used to secure the cable to a box or enclosure. </li></ul><ul><li>The product is available in 3/8” trade sizes. </li></ul><ul><li>KO size for each connector is ½”. </li></ul>The most cost effective way to terminate AC/MC or FMC in a box or enclosure. Period!
    14. 14. Stainless Steel Conduit Hangers <ul><li>Stainless steel conduit and pipe hangers provide mechanical support to conduit and raceway systems. </li></ul><ul><li>Stainless hangers are made from 301 stainless and are available in ½ - 4” trade sizes and are UL and cUL Listed. </li></ul><ul><li>They can be used for either horizontal or vertical installations. </li></ul><ul><li>They are supplied with round head, square neck stainless bolt and nut (with nut already attached to the bolt) so one handed installation is quick and easy with a ¼-20 (1/2- 2”sizes) or 5/16 -18 (2 ½ -4”sizes) nut driver. </li></ul>Watch For More New Stainless Steel Fittings Coming Soon!
    15. 15. Rigid Conduit Fittings <ul><li>Rigid Couplings </li></ul><ul><ul><li>Rigid conduit couplings are used to join two lengths of threaded rigid or IMC conduit. </li></ul></ul><ul><ul><li>The rigid conduit couplings are made of galvanized steel to ensure their strength in rigid/IMC applications and are available in ½” – 6” trade sizes. </li></ul></ul><ul><li>Rigid Elbows </li></ul><ul><ul><li>Rigid Elbows (also known as conduit ‘sweeps’) are used to make a 45° or 90° bend between two lengths of threaded rigid or IMC conduit. </li></ul></ul><ul><ul><li>The curvature of the conduit is used to fit specific locations and or make turns or change directions in the installation. </li></ul></ul><ul><ul><li>The rigid elbows are made of steel and are galvanized for corrosion resistance. </li></ul></ul><ul><ul><li>They are available in ½” – 4” trade sizes. </li></ul></ul>A natural extension from the company that invented the Condulet®
    16. 16. Commercial Hubs <ul><li>Cooper Crouse-Hinds new line of Commercial hubs (CHB series) are available to provide a lower cost “contractor grade” hub </li></ul><ul><li>The Commercial Hub provides a light-weight hub that installs quickly and easily, providing a secure termination. </li></ul><ul><li>This new offering is available in ½ - 4” sizes in both a standard and grounded version. Replacement nuts are also available. </li></ul>Commercial Hubs are the perfect choice for price driven applications where the premium features and benefits of the Myers™ offering are not required.
    17. 17. Gangable Masonry Boxes <ul><li>Used in masonry walls (brick, block etc) to mount devices, switches, GFCI’s etc. </li></ul><ul><li>Gangable feature allows the option of creating a multiple gang box from a single gang box by simply removing the combo head screw holding the side with a #2 bit and connecting the two (or more) boxes together re-using the screws. </li></ul><ul><li>Non-metallic Partitions (sold separately) are available for in multi-gang boxes to separate power & control circuits within the same box, as required by the National Electrical Code® </li></ul><ul><li>Standard Wall plates cover the box. </li></ul>Gangable feature offers customers job site flexibility and Maximizes distributor inventory investment!
    18. 18. LiQuik™ Liquidtight Fittings No Disassembly Required! <ul><li>Innovative Labor Saving Patent Pending Product – Unique to Cooper Crouse-Hinds! </li></ul>
    19. 19. While-In-Use Weatherproof Covers with Patented Movable Hinges! <ul><li>Rugged UV resistant polycarbonate cover and back protects device inside from rain, sleet, and snow without cracking or breaking and is non-corrosive and non-conductive </li></ul><ul><li>Versatile product design with movable hinges that reposition for vertical/horizontal mounting. </li></ul><ul><li>Pre-mounted neoprene gasket on the back ensuring the gasket cannot fall off or be improperly positioned during installation – assuring a weatherproof installation every time! </li></ul><ul><li>Available in 1 Gang, Self-Closing cover, Standard (3.25”) & (4.75”) depths and in 2 Gang (3.25”) depth </li></ul><ul><li>Meets and exceeds outdoor lighting requirements </li></ul><ul><li>Lockable cover (with customer added locking device) adds security </li></ul>Extreme Protection for Extreme Weather Conditions
    20. 20. SmartGuard™ <ul><li>SmartGuard is a high impact, router resistant PVC patented protection plate designed by a former drywaller specifically to keep electrical and communication boxes clean and free from debris throughout completion of construction projects. </li></ul><ul><li>See through feature makes inspection quick & easy- including orientation of ground position on devices. </li></ul>SmartGuard is THE most cost effective way to protect rough-in boxes & wiring. There is no equivalent!
    21. 21. MetalGuard™ <ul><li>MetalGuard™ protective plates protect commercial and residential electrical boxes and wiring from sheetrock mud, sanding dust, and paint and are perfect when a metallic protective plate is preferred. </li></ul><ul><li>The heavy duty metallic plates are re-usable & help reduce expensive and non-productive call backs and reworks. </li></ul>
    22. 22. TP432VMS <ul><li>TP432VMS is a 2 1/8” deep box with dedicated ¾” ko’s on the sides and integral bracket for direct attachment to the stud. The requirement for a dedicated ¾” ko is common for schools and hospitals where ¾ conduit is the norm. </li></ul><ul><li>The TP432 box also has 2 - ½” and 2 - ½“ & ¾” eccentric ko’s in the bottom of the box as well as a raised ground dimple to eliminate ground screw interference. </li></ul>
    23. 23. Fan Rated Concrete Box <ul><li>Octagon concrete boxes are used in poured deck applications in high-rises, apartments, condominiums and restaurants with outdoor dining areas. </li></ul><ul><li>They are installed on wooden or steel forms and concrete poured around. Upon removal of the forms the box is flush with the concrete. </li></ul><ul><li>The new 4” deep steel octagon box is designed specifically for use with ceiling fans. </li></ul>Fan Rated Concrete Boxes are approved for fans up to 70 pounds & fixtures up to 90 pounds!
    24. 24. Commercial Products <ul><li>Fiberglass Enclosures </li></ul><ul><ul><li>Wide range of options to meet any customer preference (9 series & custom capabilities) </li></ul></ul><ul><ul><li>Extensive selection of durable, industrial non-metallic products that deliver superior performance </li></ul></ul><ul><ul><li>Lighter and easier to handle, but strong enough to hold up under extreme conditions </li></ul></ul><ul><ul><li>Equal to stainless steel in corrosion/chemical resistance, far better than carbon steel </li></ul></ul><ul><ul><li>Non-conductive (an electrical insulator rather than electrical conductor) </li></ul></ul><ul><ul><li>Easier to punch, drill or saw </li></ul></ul>Our ability to customize offers customers another level of solutions to their corrosion problems!
    25. 25. Commercial Products Steel Outlet Boxes - New Product <ul><li>Patented Unimount™ Covers – NEW & Improved </li></ul><ul><ul><li>Combination Device Plate and Box Support in one cover. </li></ul></ul><ul><ul><li>Saves 50% installation time. </li></ul></ul><ul><ul><li>Saves 30% component cost. </li></ul></ul><ul><ul><li>No far side support required. </li></ul></ul><ul><ul><li>Available in single or two device. </li></ul></ul><ul><ul><li>Available 1/2”, 5/8”, and 3/4” raised. </li></ul></ul><ul><ul><li>Approved for Class II (low voltage) applications without a box. </li></ul></ul>Combination Mounting Method & Plaster Ring saves time & material costs!
    26. 26. New & Improved Uni-Mount Design <ul><li>Uni-Mount ™ Covers </li></ul>Feature Feature Detail Benefit 1 Four Holes <ul><li>Allows attachment of another box and use of both sides of the stud </li></ul>2 Rigid Bracket Design <ul><li>Eliminates the need for far-side support </li></ul>3 Viewing Window <ul><li>New, bigger window allows finding the stud locator marks even easier </li></ul>4 Guide Tabs <ul><li>Ensure alignment on studs </li></ul>5 Built-In Plaster Ring <ul><li>Secure box support, can be field assembled with outlet box for power or low-voltage applications </li></ul>1 2 3 4 5
    27. 27. Cooper Crouse-Hinds Contractor Corner Click On the Button on our Home Page Check back often to keep up to date on other new, exciting offerings!
    28. 28. Thank You!
    1. A particular slide catching your eye?

      Clipping is a handy way to collect important slides you want to go back to later.

    ×