Asia Pacific Markets for Dental Prosthetics and CAD/CAM 2011

Find Industry reports, Company profiles
ReportLinker and Market Statistics
>> Get this Report Now by email!

Asia Pacific Markets for Dental Prosthetics and CAD/CAM 2011
Published on August 2011

Report Summary

In 2010, the total Asia-Pacific markets for dental prosthetics (made up of Japan, South Korea and Australia) were valued at $6.4
billion, a 0.1% increase over the previous year. The overall market CAD/CAM Prosthetics is estimated to grow at a double-digit rate
over the forecast period.

The market segments covered in this report include:

' Crowns,
' Bridges,
' Inlays/Onlays,
' Veneers,
' Dentures,
' CAD/CAM System,
' CAD/CAM Prosthetics,
' CAD/CAM Blocks

Within the dental prosthetics and CAD/CAM market, companies such as Sirona, Nobel Biocare, 3M Espe and Degudent lead the
market, among many others. This report provides a comprehensive and detailed analysis of market revenues by device type, market
forecasts through 2017, unit sales, average selling prices, market drivers and limiters and a detailed competitive analysis, including
manufacturer market shares and product portfolios.

Table of Content

TABLE OF CONTENTS

EXECUTIVE SUMMARY... 1
1.1 TOTAL ASIA-PACIFIC DENTAL PROSTHETICS AND CAD/CAM DEVICE MARKET....... 1
1.2 CAD/CAM PROSTHETICS MARKET...... 2
1.3 CAD/CAM BLOCK MARKET.... 3
1.4 TREND ANALYSIS BY COUNTRY........... 4
1.5 TREND ANALYSIS BY SEGMENT ........... 5
1.6 DENTURE MARKET ....... 6
1.7 CAD/CAM SYSTEM MARKET .. 7
1.8 COMPETITIVE ANALYSIS .......... 8
RESEARCH METHODOLOGY..... 9
2.1 RESEARCH SCOPE ......... 9

Asia Pacific Markets for Dental Prosthetics and CAD/CAM 2011 (From Slideshare) Page 1/15


2.2 IDATA'S 9-STEP METHODOLOGY ......... 9
Step 1: Project Initiation & Team Selection ... 10
Step 2: Prepare Data Systems and Perform Secondary Research...... 11
Step 3: Preparation for Interviews & Questionnaire Design . 12
Step 4: Performing Primary Research 13
Step 5: Research Analysis: Establishing Baseline Estimates . 15
Step 6: Market Forecast and Analysis 15
Step 7: Identify Strategic Opportunities ......... 17
Step 8: Final Review and Market Release ...... 18
Step 9: Customer Feedback and Market Monitoring.. 19
INTRODUCTION TO DENTAL PROSTHETICS.......... 20
3.1 DENTAL HEALTH STATISTICS IN ASIA-PACIFIC ......... 20
3.2 CROWNS AND BRIDGES........... 21
3.2.1 Crowns...... 21
3.2.2 Bridges...... 21
3.2.2.1 Material Types.........21
3.2.3 Inlays/Onlays ........ 23
3.2.3.1 Material Types.........23
3.2.4 Veneers ..... 23
3.2.4.1 Material Types.........23
3.2.5 Dentures.... 24
3.2.5.1 Full Dentures...........24
3.2.5.2 Partial Dentures ......24
3.2.6 Manufacturing Process and Technological Developments .......... 24
3.2.6.1 Conventional Fabrication....24
3.2.6.2 CAD/CAM Technology ........25
3.2.6.3 Rapid Prototyping....25
3.2.6.4 Intra-Oral Digital Impression-Taking .........26
ASIA-PACIFIC DENTAL PROSTHETIC AND CAD/CAM DEVICE MARKET...... 27
4.1 INTRODUCTION ........... 27
4.2 CURRENCY EXCHANGE RATE. 28
4.3MARKET OVERVIEW... 29
4.4MARKET ANALYSIS AND FORECAST .. 33
4.5MARKET BY SEGMENT 35
4.5.1 Crown and Bridge Market 35
4.5.1.1 CAD/CAM Prosthetics Market ........39
4.5.2 Denture Market..... 41
4.5.3 CAD/CAM System Market 43
4.5.3.1 Full In-Lab CAD/CAM System Market........46
4.5.3.2 Standalone Scanner CAD/CAM System Market ......49
4.5.3.3 Chairside CAD/CAM System Market ..........52
4.6 TREND ANALYSIS BY SEGMENT ......... 55
4.7MARKET DRIVERS AND LIMITERS ...... 57
4.7.1 Total Dental Prosthetics Market... 57
4.7.1.1 Market Drivers.........57
4.7.1.2 Market Limiters .......58
4.7.2.1 Market Drivers.........60



4.7.3 Denture Market..... 62
4.7.3.1 Market Drivers.........62
4.7.4.1 Market Drivers.........64
4.8 COMPETITIVE ANALYSIS ........ 67
4.8.1 CAD/CAM Prosthetics Market ..... 67
4.8.1.1 In-Lab CAD/CAM Prosthetics.........67
4.8.1.2 Chairside CAD/CAM Prosthetics Market....68
4.9 CAD/CAM BLOCK MARKET.. 75
4.9.1 Introduction .......... 75
4.9.2 Market Overview... 76
4.9.3 CAD/CAM Block Market By Unit Type .... 79
4.9.3.1 Zirconia .......79
4.9.3.2 Porcelain .....79
4.9.3.3 Acrylic..........79
4.9.3.4 Metal80
4.10MERGERS AND ACQUISITIONS .......... 83
4.10.1 Market Highlights ........... 85
COUNTRY PROFILES...... 86
5.1 INTRODUCTION ........... 86
5.1.1 Population. 86
5.1.2 Median Age........... 86
5.1.3 GDP per Capita .... 86
5.1.4 Crowns and Bridges Placed Per 10,000 Inhabitants........ 87
5.1.5 Price Index 87
5.2 ASIA-PACIFIC DENTAL PROSTHETICS PER CAPITA SUMMARY........... 88
5.3 JAPAN.. 89
5.4 SOUTH KOREA 90
5.5 AUSTRALIA ..... 91
5.6 DENTISTS PER POPULATION.... 92
JAPANESE DENTAL PROSTHETIC AND CAD/CAM DEVICE MARKET 93
6.1 INTRODUCTION ........... 93
6.2MARKET ANALYSIS AND FORECAST .. 94
6.2.1 Dental Prosthetic Device Market.. 94
6.2.2.1 Porcelain-Fused Metal (PFM) Device Market......105
6.2.2.2 Full-Cast Device Market ...107
6.2.2.3 All-Ceramic Device Market...........109
6.2.2.4 Hard-Resin Device Market 111
6.2.3 CAD/CAM Prosthetics Market ... 113
6.2.3.1 Chairside CAD/CAM Prosthetics Market..115
6.2.3.2 In-Lab CAD/CAM Prosthetics Market ......117
6.2.4 Denture Market... 119
6.2.4.1 Full Denture Market ..........123



6.2.4.2 Partial Denture Market .....123
6.2.5 CAD/CAM System Market .......... 125
6.2.5.1 Full In-Lab CAD/CAM System Market......127
6.2.5.2 Standalone Scanner CAD/CAM System Market ....130
6.2.5.3 Chairside CAD/CAM System Market ........133
6.3MARKET DRIVERS AND LIMITERS .... 136
6.3.1 Total Dental Prosthetics Market. 136
6.3.1.1 Market Drivers.......136
6.3.1.2 Market Limiters .....137
6.3.2 Crown and Bridge Market .......... 139
6.4 COMPETITIVE ANALYSIS ...... 146
Sirona.........159
6.5 CAD/CAM BLOCK MARKET 160
6.5.1 Market Overview. 160
6.5.2 : CAD/CAM Block Market by Material Type ..... 163
6.5.2.1 Zirconia .....163
6.5.2.2 Porcelain ...163
6.5.2.3 Acrylic........163
6.5.2.4 Metal..........164
SOUTH KOREAN DENTAL PROSTHETIC AND CAD/CAM DEVICE MARKET.. 167
7.1 INTRODUCTION ......... 167
7.2MARKET ANALYSIS AND FORECAST 168
7.2.2.1 Porcelain-Fused Metal Market......179
7.2.2.2 Full-Cast Market ...181
7.2.2.3 All-Ceramic Market ...........183
7.2.3.1 Chairside CAD/CAM Prosthetics ..187



7.3.1 Total Dental Prosthetic Device Market .. 208
7.4.1 CAD/CAM Prosthetics Market 218
7.4.2 Total CAD/CAM System Market .......... 222
7.5.1 Introduction ........ 233
7.5.2 CAD/CAM Block Market 234
7.5.3 CAD/CAM Block Market by Material Type........ 237
7.5.3.1 Zirconia .....237
7.5.3.2 Porcelain ...237
7.5.3.3 Acrylic........237
7.5.3.4 Metal..........238
AUSTRALIAN DENTAL PROSTHETIC AND CAD/CAM DEVICE MARKET..... 241
8.1 INTRODUCTION ......... 241
8.2MARKET ANALYSIS AND FORECAST 242
8.2.2.1 Porcelain-Fused Metal Market......253
8.2.2.2 Full-Cast Market ...255
8.2.2.3 All-Ceramic Device Market...........257



8.4.2.1 Full In-Lab System Market 299
8.5.1 Market Overview. 308
8.5.2 CAD/CAM Block Market by Material Type........ 311
8.5.2.1 Zirconia .....311
8.5.2.2 Porcelain ...311
8.5.2.3 Acrylic........311
8.5.2.4 Metal..........312
ABBREVIATIONS 315

LIST OF FIGURES

EXECUTIVE SUMMARY 1
RESEARCH METHODOLOGY.... 9
INTRODUCTION TO DENTAL PROSTHETICS 20
ASIA-PACIFIC DENTAL PROSTHETIC AND CAD/CAM DEVICE MARKET.. 27
Figure 4-1: Exchanges Rates for the U.S. Dollar, 2010.... 28
Figure 4-2: Total Dental Prosthetic and CAD/CAM Device Market, Asia-Pacific,
2007 ' 2017 (US$M) . 30
Figure 4-3: Total Dental Prosthetic Market, Asia-Pacific, 2007 ' 2017 (US$M) .. 34
Figure 4-4: Crown and Bridge Units Sold by Material Type, Asia-Pacific,
2007 ' 2017... 36
Figure 4-5: Crown and Bridge Market, Asia-Pacific, 2007 ' 2017 (US$) . 38
Figure 4-6: CAD/CAM Prosthetics Market, Asia-Pacific, 2007 ' 2017 (US$) ...... 40
Figure 4-7: Denture Units Sold by Type, Asia-Pacific, 2007 ' 2017 ........ 41
Figure 4-8: Denture Market, Asia-Pacific, 2007 ' 2017 (US$)..... 42



Figure 4-9: CAD/CAM System Market, Asia-Pacific, 2007 ' 2017 (US$M)......... 44
Figure 4-10: Full In-Lab CAD/CAM System Market, Asia-Pacific, 2007 ' 2017
(US$) 47
Figure 4-11: Standalone Scanner CAD/CAM System Market, Asia-Pacific,
2007 ' 2017 (US$)..... 50
Figure 4-12: Chairside CAD/CAM System Market, Asia-Pacific, 2007 ' 2017
(US$) 53
Figure 4-13: Growth Rates by Segment, Total Dental Prosthetic and CAD/CAM
Device Market, Asia-Pacific, 2007 ' 2017...... 56
Figure 4-14: Drivers and Limiters, Total Dental Prosthetics Market,
Asia-Pacific, 2010 ..... 60
Figure 4-15: Drivers and Limiters, Crown and Bridge Market, Asia-Pacific, 2010 62
Figure 4-16: Drivers and Limiters, Denture Market, Asia-Pacific, 2010... 63
Figure 4-17: Drivers and Limiters, CAD/CAM System Market, Asia-Pacific,
2010 .. 66
Figure 4-18: Leading Competitors, Total CAD/CAM Prosthetics Market,
Figure 4-19: Leading Competitors, Total CAD/CAM System Market,
Figure 4-20: CAD/CAM Block Market, Asia-Pacific, 2007 ' 2017 (US$) 77
Figure 4-21: Units Sold by Material Type, CAD/CAM Block Market,
Asia-Pacific, 2007 ' 2017 ...... 81
COUNTRY PROFILES .. 86
Figure 5-1: Price Index, Asia-Pacific, 2010 ........ 87
Figure 5-2: Country Indicators, Asia-Pacific, 2010 ......... 88
Figure 5-3: Population per Dentist, Asia-Pacfic, 2010 ..... 92
JAPANESE DENTAL PROSTHETIC AND CAD/CAM DEVICE MARKET........ 93
Figure 6-1: Total Dental Prosthetic Device Market, Japan, 2007 ' 2017 (US$M) . 95
Figure 6-2: Total Dental Prosthetic Device Market, Japan, 2007 ' 2017 (JP¥M) .. 96
Figure 6-3: Crown and Bridge Market, Japan, 2007 ' 2017 (US$) ........... 99
Figure 6-4: Crown and Bridge Market, Japan, 2007 ' 2017 (JP¥) 99
Figure 6-5: Crown and Bridge Units Sold by Material Type, Japan,
2007 ' 2017. 101
Figure 6-6: PFM Device Market, Japan, 2007 ' 2017 (US$) ...... 106
Figure 6-7: PFM Device Market, Japan, 2007 ' 2017 (JP¥) ....... 106
Figure 6-8: Full-Cast Device Market, Japan, 2007 ' 2017 (US$) ........... 108
Figure 6-9: Full-Cast Device Market, Japan, 2007 ' 2017 (JP¥) 108
Figure 6-10: All-Ceramic Device Market, Japan, 2007 ' 2017 (US$) ..... 110
Figure 6-11: All-Ceramic Device Market, Japan, 2007 ' 2017 (JP¥) ...... 110
Figure 6-12: Hard-Resin Device Market, Japan, 2007 ' 2017 (US$) ...... 111
Figure 6-13: Hard-Resin Device Market, Japan, 2007 ' 2017 (JP¥) ....... 112
Figure 6-14: CAD/CAM Prosthetics Market, Japan, 2007 ' 2017 (US$) 114
Figure 6-15: CAD/CAM Prosthetics Market, Japan, 2007 ' 2017 (JP¥).. 114
Figure 6-16: Chairside CAD/CAM Prosthetics Market, Japan, 2007 ' 2017
(US$) .......... 116
Figure 6-17: Chairside CAD/CAM Prosthetics Market, Japan, 2007 ' 2017
(JP¥) ........... 116
Figure 6-18: In-Lab CAD/CAM Prosthetics Market, Japan, 2007 ' 2017 (US$) . 118



Figure 6-19: In-Lab CAD/CAM Prosthetics Market, Japan, 2007 ' 2017 (JP¥) .. 118
List of Figures
© iData Research Inc., 2011 www.idataresearch.net xi
Figure 6-20: Denture Market by Type, Japan, 2007 ' 2017........ 120
Figure 6-21: Denture Market, Japan, 2007 ' 2017 (US$) ........... 121
Figure 6-22: Denture Market, Japan, 2007 ' 2017 (JP¥) 121
Figure 6-23: Denture Units by Type, Japan, 2007 ' 2017 .......... 124
Figure 6-24: CAD/CAM System Market, Japan, 2007 ' 2017 .... 125
Figure 6-25: Full In-Lab CAD/CAM System Market, Japan, 2007 ' 2017 (US$) 128
Figure 6-26: Full In-Lab CAD/CAM System Market, Japan, 2007 ' 2017 (JP¥) . 128
Figure 6-27: Standalone Scanner CAD/CAM System Market, Japan, 2007 ' 2017
(US$) .......... 131
Figure 6-28: Standalone Scanner CAD/CAM System Market, Japan, 2007 ' 2017
(JP¥) ........... 131
Figure 6-29: Chairside CAD/CAM System Market, Japan, 2007 ' 2017 (US$) ... 134
Figure 6-30: Chairside CAD/CAM System Market, Japan, 2007 ' 2017 (JP¥) .... 134
Figure 6-31: Drivers and Limiters, Total Dental Prosthetics Market, Japan,
2010 138
Figure 6-32: Drivers and Limiters, Crown and Bridge Market, Japan, 2010 ....... 140
Figure 6-33: Drivers and Limiters, Denture Market, Japan, 2010 ........... 142
Figure 6-34: Drivers and Limiters, CAD/CAM System Market, Japan, 2010 ...... 145
Figure 6-35: Leading Competitors, CAD/CAM Prosthetics Market, Japan, 2010 147
Figure 6-36: Leading Competitors, CAD/CAM System Market, Japan, 2010...... 151
Figure 6-37: Leading Competitors, Full In-Lab CAD/CAM System Market, Japan,
2010 154
Figure 6-38: Leading Competitors, Standalone Scanner CAD/CAM System
Market, Japan, 2010. 157
Figure 6-39: CAD/CAM Block Market, Japan, 2007 ' 2017 (US$) ........ 161
Figure 6-40: CAD/CAM Block Market, Japan, 2007 ' 2017 (JP¥) ......... 161
Figure 6-41: Units Sold by Material Type, CAD/CAM Block Market, Japan,
2007 ' 2017. 165
SOUTH KOREAN DENTAL PROSTHETIC AND CAD/CAM DEVICE MARKET .... 167
Figure 7-1: Dental Prosthetics Market, South Korea, 2007 ' 2017 (US$M)........ 169
Figure 7-2: Dental Prosthetics Market, South Korea, 2007 ' 2017 (KR'M) ...... 170
Figure 7-3: Crown and Bridge Market, South Korea, 2007 ' 2017 (US$) ........... 173
Figure 7-4: Crown and Bridge market, South Korea, 2007 ' 2017 (KR') ......... 173
Figure 7-5: Crown and Bridge Units Sold by Material Type, South Korea,
2007 ' 2017. 175
Figure 7-6: PFM Device Market, South Korea, 2007 ' 2017 (US$) ........ 180
Figure 7-7: PFM Device Market, South Korea, 2007 ' 2017 (KR') ...... 180
Figure 7-8: Full-Cast Device Market, South Korea, 2007 ' 2017 (US$) . 182
Figure 7-9: Full-Cast Device Market, South Korea, 2007 ' 2017 (KR') ........... 182
Figure 7-10: All-Ceramic Device Market, South Korea, 2007 ' 2017 (US$)....... 184
Figure 7-11: All-Ceramic Device Market, South Korea, 2007 ' 2017 (KR') ..... 184
Figure 7-12: CAD/CAM Prosthetics Market, South Korea, 2007 ' 2017 (US$) .. 186
Figure 7-13: CAD/CAM Prosthetics Market, South Korea, 2007 ' 2017 (KR') 186
Figure 7-14: Chairside CAD/CAM Prosthetics Market, South Korea, 2007 ' 2017
(US$) .......... 188



Figure 7-15: Chairside CAD/CAM Prosthetics Market, South Korea, 2007 ' 2017
(KR') ........ 188
Figure 7-16: In-Lab CAD/CAM Prosthetics Market, South Korea, 2007 ' 2017
(US$) .......... 190
Figure 7-17: In-Lab CAD/CAM Prosthetics Market, South Korea, 2007 ' 2017
(KR') ........ 190
Figure 7-18: Denture Market, South Korea, 2007 ' 2017 (US$). 192
Figure 7-19: Denture Market, South Korea, 2007 ' 2017 (KR') ........... 192
Figure 7-20: Denture Units by Type, South Korea, 2007 ' 2017 195
Figure 7-21: CAD/CAM System Market, South Korea, 2007 ' 2017 ...... 197
Figure 7-22: Full In-Lab CAD/CAM System Market, South Korea, 2007 ' 2017
(US$) .......... 200
Figure 7-23: Full In-Lab CAD/CAM System Market, South Korea, 2007 ' 2017
(KR') ........ 200
Figure 7-24: Standalone Scanner CAD/CAM System Market, South Korea,
2007 ' 2017 (US$)... 203
Figure 7-25: Standalone Scanner CAD/CAM System Market, South Korea,
2007 ' 2017 (KR') . 203
Figure 7-26: Chairside CAD/CAM System Market, South Korea, 2007 ' 2017
(US$) .......... 206
Figure 7-27: Chairside CAD/CAM System Market, South Korea, 2007 ' 2017
(KR') ........ 206
Figure 7-28: Drivers and Limiters, Dental Prosthetics Market, South Korea,
2010 210
Figure 7-29: Drivers and Limiters, Crown and Bridge Market, South Korea,
2010 212
Figure 7-30: Drivers and Limiters, Denture Market, South Korea, 2010. 214
Figure 7-31: Drivers and Limiters, CAD/CAM System Market, South Korea,
2010 217
Figure 7-32: Leading Competitors, CAD/CAM Prosthetics Market, South Korea,
2010 220
Figure 7-33: Leading Competitors, CAD/CAM System Market, South Korea,
2010 224
Figure 7-34: Leading Competitors, Full In-Lab CAD/CAM System Market,
South Korea, 2010 ... 227
Figure 7-35: Leading Competitors, Standalone Scanner CAD/CAM System
Market, South Korea, 2010 .. 230
Figure 7-36: CAD/CAM Block Market, South Korea, 2007 ' 2017 (US$) .......... 235
Figure 7-37: CAD/CAM Block Market, South Korea, 2007 ' 2017 (KR') ........ 235
Figure 7-38: Units Sold by Material Type, CAD/CAM Block Market,
South Korea, 2007 ' 2017.... 239
AUSTRALIAN DENTAL PROSTHETIC AND CAD/CAM DEVICE MARKET 241
Figure 8-1: Total Dental Prosthetics Market, Australia, 2007 ' 2017 (US$M).... 243
Figure 8-2: Total Dental Prosthetics Market, Australia, 2007 ' 2017 (AU$M) ... 244
Figure 8-3: Crown and Bridge Market, Australia, 2007 ' 2017 (US$) .... 247
Figure 8-4: Crown and Bridge Market, Australia, 2007 ' 2017 (AU$) ... 247
Figure 8-5: Crown and Bridge Units Sold by Material Type, Australia,
2007 ' 2017. 249



Figure 8-6: Porcelain-Fused Metal Device Market, Australia, 2007 ' 2017
(US$) .......... 254
Figure 8-7: Porcelain-Fused Metal Device Market, Australia, 2007 ' 2017
(AU$).......... 254
Figure 8-8: Full-Cast Device Market, Australia, 2007 ' 2017 (US$) ...... 255
Figure 8-9: Full-Cast Device Market, Australia, 2007 ' 2017 (AU$) ..... 256
Figure 8-10: All-Ceramic Device Market, Australia, 2007 ' 2017 (US$) ........... 257
Figure 8-11: All-Ceramic Device Market, Australia, 2007 ' 2017 (AU$) ........... 258
Figure 8-12: CAD/CAM Prosthetics Market, Australia, 2007 ' 2017 (US$) ....... 259
Figure 8-13: CAD/CAM Prosthetics Market, Australia, 2007 ' 2017 (AU$)....... 260
Figure 8-14: Chairside CAD/CAM Prosthetics Market, Australia, 2007 ' 2017
(US$) .......... 263
Figure 8-15: Chairside CAD/CAM Prosthetics Market, Australia, 2007 ' 2017
(AU$).......... 263
Figure 8-16: In-Lab CAD/CAM Prosthetics Market, Australia, 2007 ' 2017
(US$) .......... 265
Figure 8-17: In-Lab CAD/CAM Prosthetics Market, Australia, 2007 ' 2017
(AU$).......... 265
Figure 8-18: Denture Market, Australia, 2007 ' 2017 (US$)...... 267
Figure 8-19: Denture Market, Australia, 2007 ' 2017 (AU$) ..... 267
Figure 8-20: Units Sold by Type, Denture Market, Australia, 2007' 2017 ......... 270
Figure 8-21: CAD/CAM System Market, Australia, 2007 ' 2017 ........... 271
Figure 8-22: Full In-Lab CAD/CAM System Market, Australia, 2007 ' 2017
(US$) .......... 274
Figure 8-23: Full In-Lab CAD/CAM System Market, Australia, 2007 ' 2017
(AU$).......... 274
Figure 8-24: Standalone Scanner CAD/CAM System Market, Australia,
2007 ' 2017 (US$)... 277
Figure 8-25: Standalone Scanner CAD/CAM System Market, Australia,
2007 ' 2017 (AU$) .. 277
Figure 8-26: Chairside CAD/CAM System Market, Australia, 2007 ' 2017
(US$) .......... 280
Figure 8-27: Chairside CAD/CAM System Market, Australia, 2007 ' 2017
(AU$).......... 280
Figure 8-28: Drivers and Limiters, Dental Prosthetics Market, Australia, 2010 .. 284
Figure 8-29: Drivers and Limiters, Crown and Bridge Market, Australia, 2010 .. 287
Figure 8-30: Drivers and Limiters, Denture Market, Australia, 2010...... 288
Figure 8-31: Drivers and Limiters, CAD/CAM System Market, Australia, 2010 . 290
List of Figures
© iData Research Inc., 2011 www.idataresearch.net xv
Figure 8-32: Leading Competitiors, CAD/CAM Prosthetics Market, Australia,
2010 292
Figure 8-33: Leading Competitors, CAD/CAM System Market, Australia, 2010 297
Figure 8-34: Leading Competitors, Full In-Lab CAD/CAM System Market,
Australia, 2010 ........ 300
Figure 8-35: Leading Competitors, Standalone Scanner System Market, Australia,
2010 303
Figure 8-36: Leading Competitors, Chairside CAD/CAM System Market,



Australia, 2010 ........ 306
Figure 8-37: CAD/CAM Block Market, Australia, 2007 ' 2017 (US$) ... 309
Figure 8-38: CAD/CAM Block Market, Australia, 2007 ' 2017 (AU$) .. 309
Figure 8-39: Units Sold by Material Type, CAD/CAM Block Market, Australia,
2007 ' 2017. 313
ABBREVIATIONS ...... 315

LIST OF CHART S

EXECUTIVE SUMMARY 1
Chart 1-1: Dental Prosthetics and CAD/CAM Device Market, Asia-Pacific,
2007 ' 2017 (US$M) ... 1
Chart 1-2: Percentage of Prosthetics Sold by CAD/CAM Technology versus
Conventional Methods, Asia-Pacific, 2007 ' 2017 ........ 2
Chart 1-3: CAD/CAM Block Unit Share by Material Type, Asia-Pacific, 2010 ...... 3
Chart 1-4: Dental Prosthetics Market by Country, Asia-Pacific, 2010 ........ 4
Chart 1-5: Growth Rates by Segment, Crown and Bridge Market, Asia-Pacific,
2007 ' 2017..... 5
Chart 1-6: Denture Market, Asia-Pacific, 2007 ' 2017 (US$M) ..... 6
Chart 1-7: CAD/CAM System Market, Asia-Pacific, 2007 ' 2017 (US$M) 7
Chart 1-8: Leading Competitors, CAD/CAM System Market, Asia-Pacific, 2010 ... 8
RESEARCH METHODOLOGY.... 9
INTRODUCTION TO DENTAL PROSTHETICS 20
ASIA-PACIFIC DENTAL PROSTHETIC AND CAD/CAM DEVICE MARKET.. 27
Chart 4-1: Total Dental Prosthetic Market, Asia-Pacific, 2007 ' 2017 (US$M) .... 31
Chart 4-2: Total CAD/CAM System Market, Asia-Pacific, 2010 ' 2017 (US$M) . 32
Chart 4-3: Crown and Bridge Units by Material Type, Asia-Pacific, 2007 ' 2017 37
Chart 4-4: CAD/CAM System Market, Asia-Pacific, 2007 ' 2017 (US$M) .......... 45
Chart 4-5: Full In-Lab CAD/CAM System Market, Asia-Pacific, 2007 ' 2017
(US$M) ......... 48
Chart 4-6: Standalone Scanner CAD/CAM System Market, Asia-Pacific,
2007 ' 2017 (US$M) . 51
Chart 4-7: Chairside CAD/CAM System Market, Asia-Pacific, 2007 ' 2017
(US$M) ......... 54
Chart 4-8: Leading Competitors, Total CAD/CAM Prosthetics Market,
Chart 4-9: Leading Competitors, Total CAD/CAM System Market, Asia-Pacific,
2010 .. 74
Chart 4-10: CAD/CAM Block Market, Asia-Pacific, 2007 ' 2017 (US$M) .......... 78
Chart 4-11: Units Sold by Material Type, CAD/CAM Block Market,
Asia-Pacific, 2007 ' 2017 ...... 82
COUNTRY PROFILES .. 86
Chart 5-1: Country Statistics, Japan, 2010 .......... 89
Chart 5-2: Country Statistics, South Korea, 2010 90
Chart 5-3: Country Statistics, Australia, 2010 .... 91
JAPANESE DENTAL PROSTHETIC AND CAD/CAM DEVICE MARKET........ 93
Chart 6-1: Total Dental Prosthetic Device Market, Japan, 2007 ' 2017 (US$M)... 97
Chart 6-2: Crown and Bridge Market, Japan, 2007 ' 2017 (US$M)........ 100



Chart 6-3: Crown and Bridge Units Sold by Material Type, Japan, 2010 102
Chart 6-4: Crown and Bridge Units Sold by Material Type, Japan, 2017 ........... 103
Chart 6-5: Crown and Bridge Unit Share by Material Type, Japan, 2007 ' 2017 104
Chart 6-6: Denture Market, Japan, 2007 ' 2017 (US$M) ........... 122
Chart 6-7: CAD/CAM System Market, Japan, 2007 ' 2017 (US$M) ...... 126
Chart 6-8: Full In-Lab CAD/CAM System Market, Japan, 2007 ' 2017 (US$M) 129
Chart 6-9: Standalone Scanner CAD/CAM System Market, Japan, 2007 ' 2017
(US$M) ....... 132
Chart 6-10: Chairside CAD/CAM System Market, Japan, 2007 ' 2017 (US$M) . 135
Chart 6-11: Leading Competitors, CAD/CAM Prosthetics Market, Japan, 2010.. 148
Chart 6-12: Leading Competitors, CAD/CAM System Market, Japan, 2010 ...... 152
Chart 6-13: Leading Competitors, Full In-Lab CAD/CAM System Market, Japan,
2010 155
Chart 6-14: Leading Competitors, Standalone Scanner CAD/CAM System
Market, Japan, 2010. 158
Chart 6-15: CAD/CAM Block Market, Japan, 2007 ' 2017 (US$M) ...... 162
Chart 6-16: Units Sold by Material Type, CAD/CAM Block Market, Japan,
2007 ' 2017. 166
SOUTH KOREAN DENTAL PROSTHETIC AND CAD/CAM DEVICE
MARKET .... 167
Chart 7-1: Dental Prosthetics Market, South Korea, 2007' 2017 (US$M) .......... 171
Chart 7-2: Crown and Bridge Market, South Korea, 2007 ' 2017 (US$M) ......... 174
Chart 7-3: Crown and Bridge Market by Material Type, South Korea, 2010 ...... 176
Chart 7-4: Crown and Bridge Market by Material Type, South Korea, 2017 ...... 177
Chart 7-5: Crown and Bridge Unit Share by Material Type, South Korea,
2007 ' 2017. 178
Chart 7-6: Denture Market, South Korea, 2007 ' 2017 (US$M) . 193
Chart 7-7: CAD/CAM System Market, South Korea, 2007 ' 2017 (US$M) ....... 198
Chart 7-8: Full In-Lab CAD/CAM System Market, South Korea, 2007 ' 2017
(US$M) ....... 201
Chart 7-9: Standalone Scanner CAD/CAM System Market, South Korea,
2007 ' 2017 (US$M) ........... 204
Chart 7-10: Chairside CAD/CAM System Market, South Korea, 2007 ' 2017
(US$M) ....... 207
Chart 7-11: Leading Competitors, CAD/CAM Prosthetics Market, South Korea,
2010 221
Chart 7-12: Leading Competitors, CAD/CAM System Market, South Korea,
2010 225
Chart 7-13: Leading Competitors, Full In-Lab CAD/CAM System Market, South
Korea, 2010 . 228
Chart 7-14: Leading Competitors, Standalone Scanner CAD/CAM System
Market, South Korea, 2010 .. 231
Chart 7-15: CAD/CAM Block Market, South Korea, 2007 ' 2017 (US$M) ...... 236
Chart 7-16: Units Sold by Material Type, CAD/CAM Block Market, South
Korea, 2007 ' 2017.. 240
AUSTRALIAN DENTAL PROSTHETIC AND CAD/CAM DEVICE MARKET 241
Chart 8-1: Dental Prosthetics Market, Australia, 2007 ' 2017 (US$M) .. 245
Chart 8-2: Crown and Bridge Market, Australia, 2007 ' 2017 (US$M) .. 248



Chart 8-3: Crown and Bridge Units Sold by Material Type, Australia, 2010 ..... 250
Chart 8-4: Crowns and Bridge Units Sold by Material Type, Australia, 2017 ..... 251
Chart 8-5: Crown and Bridge Unit Share by Material Type, Australia,
2007 ' 2017. 252
Chart 8-6: CAD/CAM Prosthetics Market, Australia, 2007 ' 2017 (US$M) ....... 261
Chart 8-7: Denture Market Australia, 2007 ' 2017 (US$M)....... 268
Chart 8-8: CAD/CAM System Market, Australia, 2007 ' 2017 (US$M) . 272
Chart 8-9: Full In-Lab CAD/CAM System Market, Australia, 2007 ' 2017
(US$M) ....... 275
Chart 8-10: Standalone Scanner CAD/CAM System Market, Australia,
2007 ' 2017 (US$M) ........... 278
Chart 8-11: Chairside CAD/CAM System Market, Australia, 2007 ' 2017
(US$M) ....... 281
Chart 8-12: Leading Competitors, CAD/CAM Prosthetics, Australia, 2010 ........ 293
Chart 8-13: Leading Competitors, CAD/CAM System Market, Australia, 2010 .. 298
Chart 8-14: Leading Competitors, Full In-Lab CAD/CAM System Market,
Australia, 2010 ........ 301
Chart 8-15: Leading Competitors, Standalone Scanner System Market, Australia,
2010 304
Chart 8-16: Leading Competitors, Chairside CAD/CAM System Market,
Australia, 2010 ........ 307
Chart 8-17: CAD/CAM Block Market, Australia, 2007 ' 2017 (US$M) . 310
Chart 8-18: Units by Material Type, CAD/CAM Block Market, Australia,
2007 ' 2017. 314
ABBREVIATIONS ...... 315


Fax Order Form
To place an order via fax simply print this form, fill in the information below and fax the completed form to:
Europe, Middle East and Africa : + 33 4 37 37 15 56
Asia, Oceania and America : + 1 (805) 617 17 93
If you have any questions please visit http://www.reportlinker.com/notify/contact

Order Information
Please verify that the product information is correct and select the format(s) you require.

Asia Pacific Markets for Dental Prosthetics and CAD/CAM 2011

Product Formats
Please select the product formats and the quantity you require.

Hard Copy--USD 7 995.00 Quantity: _____

1 User License--USD 8 495.00 Quantity: _____

Corporate License--USD 9 995.00 Quantity: _____

Contact Information
Please enter all the information below in BLOCK CAPITALS

Title: Mr Mrs Dr Miss Ms Prof

First Name: _____________________________ Last Name: __________________________________

Email Address: __________________________________________________________________________

Job Title: __________________________________________________________________________

Organization: __________________________________________________________________________

Address: __________________________________________________________________________

City: __________________________________________________________________________

Postal / Zip Code: __________________________________________________________________________

Country: __________________________________________________________________________

Phone Number: __________________________________________________________________________

Fax Number: __________________________________________________________________________


Payment Information
Please indicate the payment method, you would like to use by selecting the appropriate box.

Payment by credit card Card Number: ______________________________________________

Expiry Date __________ / _________

CVV Number _____________________

Card Type (ex: Visa, Amex…) _________________________________

Payment by wire transfer Crédit Mutuel
RIB : 10278 07314 00020257701 89
BIC : CMCIFR2A
IBAN : FR76 1027 8073 1400 0202 5770 189

Payment by check UBIQUICK SAS
16 rue Grenette – 69002 LYON, FRANCE

Customer signature:

Please note that by ordering from Reportlinker you are agreeing to our Terms and Conditions at
http://www.reportlinker.com/index/terms

Please fax this form to:

Europe, Middle East and Africa : + 33 4 37 37 15 56

Asia, Oceania and America : + 1 (805) 617 17 93


Asia Pacific Markets for Dental Prosthetics and CAD/CAM 2011

Recommended

Recommended

More Related Content

More from ReportLinker.com

More from ReportLinker.com (20)

Asia Pacific Markets for Dental Prosthetics and CAD/CAM 2011