Junger Audio TAP

The reference standard in audio levelling and loudness control introduces: T*AP TM• Level Magic Loudness Control • 5.1 Surround Upmix • Spectral Signature by Junger Audio• SDI Embedded Audio • Dolby® Processing incl. Level Magic II Loudness Control _ Metadata Management Television _ 5.1. Surround Upmix l Television Audio Processor Audio Processor _ Spectral Signature by Junger Audio _ SDI Embedded Audio _ Dolby® Processing & Metadata Management AES/EBU 5.1 Spectral Level AES/EBU t in Upmix Signature Magic out Metadata IF slot 1 Generator t IF slot 1 in out IF slot 2 Dolby® Dolby® t IF slot 2 in decoder encoder out The wide band 8 channel processor (5.1+2 or 4x2) focuses on automatic and adaptive loudness control using Jünger Audio’s renowned LEVEL MAGIC™ algorithm (ITU compliant). It also offers dynamic filters so that the sound can be ‘coloured’ much more easily than one can achieve with a traditio- nal multi band sound processor. Optional Dolby Decoding and Encoding (D, D+, or Pulse), as well as metadata management, are also provided along with 5.1 Downmix and Jünger Audio’s recently introduced UPMIX functionality. www.junger-audio.com • www.jungeraudioasia.com

Television Audio Processor T*AP AES Input BASE UNIT 3G/HD/SD-SDI I/O OPTION Number of channels: 4 x AES/EBU , AES3id Input Electrical SDI input standards (auto sensing) Input impedance: unbalanced, BNC75 Ohm Power Supply: AC 85 … 264 V, 50..60 Hz 3G - SMPTE 424/425M (Level A/B) Input level: 0.3 … 5.0 V pp dual redundant power supply HD - SMPTE 292M Input sample rate: 48 kHz Consumption: max. 46 W without hardware remote SD - SMPTE 259M Sample Rate Converter: max. 58 W with hardware remote formats 1080p23.98, 24, 25, 29.97, 30, 50, 59.95, 60 Input sample rate: 32 kHz ..192 kHz ( total power consumption depends on option boards) 1080i50, 59.94, 60 THD+N: < 130 dB @ 0 dBFS Mechanical 720p23.98, 24, 25, 29.97, 30, 50, 59.94, 60 Resolution: 24 bit Dimensions : 19 „, 1RU, depths: ca. 27 cm 625i50; 525i59.94, … AES Output Weight: connector BNC IEC 169-8); 75 Ohm Number of channels: 4 x AES/EBU , AES3id Ambient return Loss > 15 dB (typ. > 18dB) from 5MHz to 1485 MHz Output impedance: 75 Ohm unbalanced, BNC TTemperature: 0°C to 50°C operating > 10 dB (typ. > 11 dB) from 1485 MHz to 2970 MHz Output level: 1.0 V pp unbalanced @ 75 Ohm -20 ºC to 70 ºC non operating adaptive equalization, typical of Belden 1694A coaxial cable Bypass: power fail relay bypass Humidity: 90%, non condensing 250 m at 270 Mbps; 250 m at 1.485 Gbps; 150 m at 2.97 Gbps jitter tolerance Timing: > 2UI, Alignment: > 0.7 UI SYNC intern: 48 kHz, +- 10 ppm SDI output standards SYNC extern: BNC, ICE 61169-8 A 3G - SMPTE 424/425M (Level A/B) AES3id , 44.1 kHz, 48 kHz HD - SMPTE 292M 1 V ±10% at 75 Ohm SD - SMPTE 259M Wordclock, 44.1 kHz, 48 kHz formats 1080p23.98, 24, 25, 29.97, 30, 50, 59.95, 60 1 V …3 V at 75 Ohm 1080i50, 59.94, 60 Video BB, Tri-Level SD, HD 720p23.98, 24, 25, 29.97, 30, 50, 59.94, 60 0.5…1.0 V at 75 Ohm 625i50; 525i59.94, … SYNC extern via AES input quantization 10Bit Ch1/2, AES3id , 44.1 kHz, 48 kHz connector BNC IEC 169-8); 75 Ohm 1 V ±10% at 75 Ohm return Loss > 15 dB (typ. > 18dB) from 5MHz to 1485 MHz SYNC extern via Option Board > 10 dB (typ. > 11 dB) from 1485 MHz to 2970 MHz SDI: signal level 800 mV +/- 10% 48 kHz, synchronous to video (SD, HD, 3G) D.C. offset 0.0 V +/- 0.5 V 44.1 kHz , 48 kHz asynchronous (HD, 3G) rise and fall time < 135 ps at HD/3G, < 800 ps at SD AES : overshoot < 10% of amplitude 44.1 kHz ,48 kHz, sync to CH1/2 output jitter Timing: < 0.5 UI, Alignment: < 0.2 UI SYNC Output Wordclock, 2 V at 75 Ohm Metadata Input / Output relay bypass (manual or automatic on power fail) Standard: SMPTE RDD6-2008, 15 Frames video delay; 16 channel audio de-embedder / embedder Dolby E Metadata Stream , 115.2 kbps REMOTE VANC (SMPTE 2020-2) de-embedder / embedder; 320 ms audio delay per audio channel Connector Input: Sub-D, 9pol female Electrical Connector Output: Sub-D, 9pol male Power Supply: POE, Power Over Ethernet, IEEE 802.3af AES/EBU I/O OPTION (4x AES I/O [DD 188]) Consumption: 8W connector 25pin Sub-D female Max Cable Lenght 30 m , direct supply from Basic Device inputs 110 Ohm balanced or 75 Ohm unbalanced jumper selection GPI 0.3 V … 5.0 Vpp; sample rate converter 24 Bit, Cable Type : S/FTP CAT.5E 26AWGx Level: +3…+30V, H-active, optocoupler input sample rate 32 kHz … 192 kHz, THD+N < 130 dB @ 0 dBFS Mechanical Connector: 25 pin SUB-D female outputs 110 Ohm balanced or 75 Ohm unbalanced jumper selection Dimensions: 19 „, 1RU, depths: ca. 6 cm GPO 4.0 Vpp balanced, 1.0 Vpp @ 75 Ohm Ambient Level: relay with change over contact power fail relay bypass Temperature: 0°C to 50°C operating Contact rating: 1A 24 V , 0,5 A 42 V -20 ºC to 70 ºC non operating Aux. Voltage Supply: isolated +5 V ANALOGUE I/O OPTION (4x analog I/O [AN 144]) Humidity: 90%, non condensing Connector: 25 pin SUB-D female connector 25pin Sub-D female input impedance: > 10 kOhm, electronically balanced max input level: 0.0 dBu … +24 dBu adjustable in 0.5 dB steps dynamic range: 115 dB THD+N: @ -1 dBFS, 15 dBu: -90 dB frequency response: 20 Hz … 22 kHz (-2.0 dB) crosstalk @ 20 kHz: > 100 dB calibration gain mismatch: < 0.3 dB output impedance: 5 Ohm, electronically balancedRear panel view T*AP with options max. output level @ 0 dBFS: 0.0 dBu … +24 dBu adjustable in 0.5 dB steps dynamic range: 112dB on board: 4x AES/EBU I/O, Sync In, WCLK Out, Ethernet LAN, RS-232 via USB, 8x GPI in, 8x GPO out, Dolby RS-485 in/out THD+N @ -1 dBFS: 92 dB frequency response: 20 Hz … 22 kHz (-2.0 dB) options: 3G/HD/SD-SDI (16ch) • AES/EBU I/O (8ch) • Analogue I/O (4ch) crosstalk @ 20 kHz: > 100 dB Decoder Dolby Digital / Digital+ / E • Encoder Dolby Digital+ / Digital • Encoder Dolby E gain mismatch balanced / unbalanced: < 0.3 dB power fail relay bypass Technical Specifications www.junger-audio.com • www.jungeraudioasia.com Design and specifications are subject to change without notice. All rights reserved. © 2011 Jünger Audio Berlin www.junger-audio.com • www.jungeraudioasia.com

Concept _ unique “all in one box” solution _ 8ch DSP processing _ 16ch SDI support _ designed for automation control _ flexible audio interface configuration _ Redundant Power Supply _ Detachable Operating Panel _ 2x Interface Option Slots _ all I/O interfaces with power fail bypass function _ Small Size: 19”, 1RU, base unit only 25cm depth operating panel only 4cm depth! _ Eco-friendly Low Power Consumption – below 60VA _ T*AP is Processor Box and detachable Operating Panel _ Single Processor Boxes and Single Operating Panels are available Remote Concept _ PoE (Power over Ethernet) _ Setup and Configuration by Web Interface _ Single Remote (Pool Units) _ Multi Remote (Single Units) _ Intelligent Access Control Audio Processing _ Four Major Processing blocks: _ Three Basic Link Modes: Input Conditioning 4x Stereo 5.1/7.1 Upmix 5.1 Surround & Stereo Effects (inc. Spectral Signature by Jünger Audio) 7.1 Surround Level Magic II Loudness Control Input Conditioner Surround Processor Effects Processor Level Magic1 8 5.1 HPF 5.1 Upmix Center Spectral 4 Band Comp 5.1 Leveler Peak0 5.1 5.1 5.1 5.1 Parametric 5.1 Quasi 5.1 + Delay Ducker Signature Limiter 5.1 Quasi LPF Surround EQ Peak Delay 2 Format/ / Peak Stereo Input TrueI / Fail Over Down St. St. Peak Delay Gain St. Detector St M ON St. True Mix Stereo Peak Loudness O St. UP Stereo Meter N Delay Stereo StereoU 2xC 2x Leveler Ducker St O T Delay 2x CenterT Center P M US Monitor O Stereo T Stereo Monitor Gain N Delay S O Spectral Signature - Fully Automated Dynamic EQ by Jünger Audio - Unique low latency dynamic filter design - Dynamic Equalization Gain according to Reference Mask - Adaptive to Signal Input Level www.junger-audio.com • www.jungeraudioasia.com

Junger Audio TAP

by Radikal Ltd.

Accessibility

Categories

Upload Details

Usage Rights

Statistics

Junger Audio TAP Document Transcript