Data Sheet No. TDC_Target_Display_Client_Spec_SheetEZcall™ EnterpriseTDC – Target Display ClientDescriptionThe Target Display Client is a unique output client used to display real-time staff response times or call activity. The TargetDisplay Client is fully configurable to display events from specific areas and allows you to set a specific target responsetime. Only events outside the target time will increment the counter and be displayed. Ideal uses include manager heads-up display for at-a-glance status reporting and worker incentive displays. Every TDC client networks to an EZcall™ DCS(Display Control Server) over a standard Ethernet LAN or WAN network using the TCP/IP protocol. A single EZcall™ DCSwill support up to 10,000 supervised TDC client connections over a network allowing that many systems to be networkedinto a single-node EZcall™ installation. Watchdog signals are used between the DCS and all TDC applications to ensurereliable communications.Features • Attractive display does not take-up the entire screen • Configurable wards or areas – only display the locations that are needed • May be run as an application or a supervised Windows service • Event list display • Lockable to prevent shutting-down or relocating the window • Extensive log reports simplify system troubleshootingSystem RequirementsCPU: Intel Core2 Duo or Equivalent, >180MHzOS: Windows XP, 7, Server 2003, Vista Ultimate, Linux Ubuntu 9.0Memory: 2GB minimum (4GB recommended)LAN/WAN: 10/100 (Gigabit recommended)Hard Disk: 60Gb 1939 144 Street th Surrey, BC V4A 7M7 T. 604.812.SOFT (7638) E. firstname.lastname@example.org W. www.qbsoft.caSpecifications subject to change without notice. Copyright 2010 – QBsoft Solutions All trademarks, and trade names shown here are the property of their relative owners.