Data Sheet No. EGW_EZcall_GuardRFID_Wrapper_Spec_SheetEZcall™ EnterpriseEGW – EZcall™ GuardRFIDWrapperDescriptionThe EZcall™ GuardRFID Wrapper is a bi-directional interface between an EZcall™ system and a GuardRFID RTLS system.The EGW integrates directly with an GuardRFID Argus server using the proprietary GuardRFID XML-based protocol toallow all GuardRFID SafeGuard, TotGuard and AllGuard alarms to be received and processed by EZcall™, as well asallowing an EZcall™ system to dispatch alarm messages to GuardRFID staff tags. Every EGW networks to an EZcall™DCS (Display Control Server) over a standard Ethernet LAN or WAN network using the TCP/IP protocol. A single EZcall™DCS will support up to 10,000 supervised EGW client connections over a network allowing that many systems to benetworked into an enterprise EZcall™ installation. Watchdog signals are used between the DCS and all EGW applicationsto ensure reliable communications.Features • TCP/IP, UDP/IP, RS232, RS485 communications support • Secure encrypted server communications • Secure encrypted Argus server communications • Rapid setup and deployment • Real-time location and alarm information monitoring • Message dispatching to staff tags • May be run as an application or a supervised Windows service • User configurable priorities and messages • Integrated badge tag simulator for testing & troubleshooting • Extensive log reports simplify system troubleshootingSupported Systems/ProductsGuardRFID Argus serverEZcall™ DCS serverSystem RequirementsCPU: Intel Core2 Duo or Equivalent, >180MHzOS: Windows XP, 7, Server 2003, Vista UltimateMemory: 2GB minimum (4GB recommended)LAN/WAN: 10/100 (Gigabit recommended)Hard Disk: 60GbInterface: TCP/IP XML-based protocol 1939 144 Street th Surrey, BC V4A 7M7 T. 604.812.SOFT (7638) E. firstname.lastname@example.org W. www.qbsoft.caSpecifications subject to change without notice. Copyright 2010 – QBsoft Solutions TotGuard, Argus, SafeGuard, AllGuard and GuardRFID are trademarks of GuardRFID Inc.