Slide Plates V.2 Webinar

Attention all Attendees…
Welcome!
To listen to the audio portion: 1.) Make sure your speakers or headset are on and turned up.
OR
2.) Dial the phone number listed in your confirmation e-mail:
Thank you for attending. We will be starting shortly.
2:00 pm Time Slot
U.S. #: (1) 516-453-0014
Access Code: 408-126-055
10:00 am Time Slot
U.S. #: (1) 323-417-4600
Access Code: 401-916-669
* If you are located outside the U.S., please refer to your confirmation e-mail for a list of phone numbers to call for your area.

PIPING TECHNOLOGY & PRODUCTS, INC. Webinar: Slide Plates October 22, 2009

PT&P and Subsidiaries Fronek Anchor Darling Ent., Inc. ASME Nuclear Qualified Pipe Shields, Inc. ISO 9001-2000 Certified Sweco Fab, Inc . ASME U-Stamp R-Stamp PIPING TECHNOLOGY & PRODUCTS, INC. Member of MSS, SPED, APFA, U.S. Bellows, Inc. Member of EJMA

Certifications & Manufacturing Facility
EJMA Member
ASME U-Stamp
ASME R-Stamp
ASME NS Certified
ISO 9001:2000 Certified
Minority Business Enterprise (MBE) by City of Houston
Houston Minority Business Council (HMBC)
Houston, Texas USA
450,000 Square Feet of Covered Shop Space on a 35 Acre Property
Located Near the Port of Houston
Certifications Manufacturing Facility

History

Expansion Joints
Multi-Ply Stainless Steel Bellows
Thick Wall (Flanged & Flued Head)
Thin Wall Bellows
Furnace Bags
Rectangular
Slip-Type
Rubber
Fabric
Variable & Constant Spring Supports
Big Ton Spring Supports
Pre-Insulated Pipe Supports
Cold & Hot Shoes
Hydraulic Shocks & Sway Suppressors
Mechanical Snubbers & Sway Braces
Sway Strut Assemblies
ASME Code Pressure Vessels & Tanks
Pig Launchers & Receivers
Products & Services
Pipe Hangers, Clamps and Risers
Saddle Supports and Coverings
Hardware, Rods and U-Bolts
Hold-Down Clamps
Beam Attachments
Clevis Hangers
Slide Bearing Plates
Duct and Transition Pieces
Anchor Bolts and Embeds
Bellmouth Reducers
Instrument Stands
Conical Strainers
Inspection, Analysis & Training
Dampers/Louvers
Product Testing & Stress Analysis
Spectacle and Line Blinds
Spacers and Drip Rings

Introduction Permits Translational Motion Rollers Slide Plates Moves with Supporting Element Low Coefficient of Friction

Trapeze Roller Hanger Rollers —Specifications Base Mounted Roller Chair Hanger Type Roller

Pipe Rollers with a Red Oxide Primer Finish
Maximum Load: 5000 lb.
Pipe Size: 18" Diameter
Rollers —Roller Chair

Rollers —Polyurethane Pipe Rollers Polyurethane Pipe Rollers for Gas Piping

Rollers —Heavy Duty Roller Stands 72" and 60" Heavy Duty Roller Stands for a Cooling Tower

Rollers —Roller Stands Roller Stands for a Company that Manufactures “Fired Heaters” Load Testing at 1000°F

Rollers —Big Ton with Special Rollers Big Ton Spring with Special Rollers 3D Model of Rollers Special Rollers

Rollers —Variables with Rollers Customized Rollers

Rollers —Constants with Roller Bearings U-Type Constant with Cam Follower Roller Bearings

Bronzphite  Slide Plates —Materials Marinite  Graphite PTFE, 25% Glass Filled Stainless Steel

Design When Applying Slide Plates Systems
Full weld for more corrosive environments
Tack weld for less corrosive environments
Backing Plate Low Coefficient of Friction Material Supported Element Supporting Element “ Sandwich” Concept Slide Plates

Slide Plates: PTFE, 25% Glass Filled —Applications
Bridges :
Highway Bridges
Overpasses
Railroad Bridges
Architectural in Wood, Concrete, or Steel :
Cross beam and girder slip joints
Roof slabs and corbels
Vibration pads
Airport hanger doors
Domes
Industrial :
Heat Exchangers
Dust Collectors
Heavy Machinery
Refinery Equipment
Wind Tunnels
Penstocks
Vessels
Pipelines
Air Preheaters
Atomic Energy Applications
Transmission Towers
Storage Tanks
Offshore Drilling Rigs
Common Applications:

For Welding to Mating Surfaces
75 PSI to 2,000 PSI
Temperature: -320°F to +400°F
For Higher Load Capacities
75 PSI to 2,200 PSI
Temperature: -320°F to +400°F
* Alternative backing materials available Slide Plates: PTFE, 25% Glass Filled —Specifications

Slide Plates 43" Angled Pipe Shoes with PTFE, 25% glass filled slide plates Constant Spring Supports with PTFE, 25% glass filled slide plates welded to the load flange Variable Springs with PTFE, 25% glass filled slide plates welded to the top of the load flange Slide Plates: PTFE, 25% Glass Filled

Slide Plates Slide Plates: PTFE, 25% Glass Filled Structural Steel

Hold Downs (HD) 42" HD-2 with Wedge Support 16" HD-2 6" - 8" HD-2 Slide Plates: PTFE, 25% Glass Filled

Slide Plates: PTFE, 25% Glass Filled —Coefficient of Friction

Slide Plates: Graphite —Specifications Graphite slide plates can be used in place of PTFE, 25% glass filled slide plates for higher temperature applications
High operating temperature
Ease of installation
No setting problems
Low coefficient of friction
No surface treatments, grouting, or expensive mechanical attachment necessary
Chemically inert
Unaffected by weather conditions
Has the ability to absorb dirt and grit within itself
Self-aligning when used in conjunction with elastometric backing pads

Slide Plates: Graphite —Specifications
Standard & Full Weld Assembly:
Loads to 2,000 PSI
Temperature: +1,000 ° F Air & +3,000 ° F Inert

Slide Plates: Graphite Graphite Slide Plates (Bonded) Bolted Design

Slide Plates: Graphite 9 1/2 ' Long Graphite Slide Plates

Slide Plates: Bronzphite® —Applications & Specifications Bronzphite® is best suited for high loads, low velocity applications and in places where the use of oil or grease is undesirable or unfeasible.

Slide Plates: Bronzphite® Bronzphite ® Slide Plates
With solid graphite inserts
For an oil refinery in Texas

Slide Plates: Bronzphite® 13,900 lb. Load Pipe Shoes and Bronzphite ® Slide Plates

Slide Plates: Marinite —Applications & Specifications For High Temperature and Load Bearing
100 PSI to 2,500 PSI
Temperature: ½" Insulator +400°F to +800°F
Coefficient of friction: 0.08 @ minimum pressure 0.06 @ maximum pressure

Marinite Insulated Slide Plate Slide Plates: Marinite

Marinite Slide Plate Assemblies Slide Plates: Marinite

Slide Plates: Marinite —Testing
Thermal Conductivity Test to Verify Applicability of Marinite Sections
Heat probes were used to record the temperature gradient

Compressive Strength Test of Marinite and Enclosure
Very High Load Rating Achieved
Optimization of Enclosure Material
Slide Plates: Marinite —Testing

Used in applications where extreme durability is required
Eliminates the need for separate backing plate
Can readily be affixed to contours (curves, corners, angles, etc.)
Overall Combination:
Thinnest of available slide plate assemblies
Can be modified in the field to suit
Available in variety of surface finishes
Stainless steel is used in extremely corrosive environments and/or extreme temperature conditions Slide Plates: Stainless Steel —Applications & Specifications

Stainless Steel Slide Plate Welded on Face of Big Ton Spring Slide Plates: Stainless Steel

Stainless Steel Slide Plates Slide Plates: Stainless Steel

Stainless Steel and PTFE, 25% Glass Filled Slide Plate with Permali Block Insulation Slide Plates: Stainless Steel

Slide Plates —Installation & Maintenance

Engineering and Design
Piping, pipe support and structural design
3D modeling technology
Pipe Stress Analysis
ANSYS
Finite Element Analysis
Special stress/thermal problems
Pro/E for 3-D Part Design
ANSYS for Mesh Generation + Analysis + Results Analysis
Field Testing
Value-Added Services —Engineering & Design Department

Cold Shoe Testing Constant Testing Marinite Slide Plate Testing Spring Load Testing Anchor Shoe Testing Value-Added Services —Product Testing

On-site installation guidance
On-site inspection/maintenance of pipe supports
On-site snubber inspection
A system of stock standard Items
“ On-call” engineering team
Available 24x7
PT&P’s “On-call” engineering team guarantees a response time of 30 minutes Value-Added Services —Field Services & Emergency Services

> 30,000 spring coils
> 1 million Lb. of standard items
Full year supply of beam, angle, plates, rods…etc.
At Piping Technology & Products, we stock: Value-Added Services —Inventory & Stocking Capabilities

Fatigue Testing Pressure Balanced Expansion Joints FEA: Plate Thickness and Pipe Stress Inspection and Maintenance of Supports “ Over 450 Project Examples” Value-Added Services —Technical Literature at pipingtech.com

PT&P Webinar Featuring Slide Plates Please send any additional questions or inquiries to [email_address] We invite you to visit our Discussion Forum at www.pipingtech.com Thank You for Attending…

Slide Plates V.2 Webinar

by Piping Technology & Products, Inc. on Jun 06, 2011

Accessibility

Categories

Upload Details

Usage Rights

1 Embed 1

Statistics

Slide Plates V.2 Webinar — Presentation Transcript