PGSR Workstation Presentation

Warm
Clean air in
Clean air out
Dry
Carbon ...exhaust filters
Clean
Environmentally ....friendly
Compact
60kg total ...weight
Safe working ....environment
Cost effective

Looking towards the exhaust filter wall

Workstation prepared for rotor placement

Rotor stands awaiting the steam turbine rotor

Steam turbine ready for grit blasting

Protective sheets installed for grit over spray

Grit blasting being conducted on the steam turbine rotor
A noise survey showed 112dB inside and 99dB outside the workstation

Current methods of “clean, warm and dry” environment for generator rotor

With old methods if crane work is to be carried out, licensed scaffolders are required to modify the structure

Workstation floor section for the generator rotor is 11m long and 3 m wide

Workstation inflation is complete in approximately 5 minutes

No licences are required for personnel to erect, modify or move the Workstation

Clear sides allow adequate ambient lighting for safe work conditions

Halogen lamps are used to increase the Workstation temperature

A temperature of 32o C and humidity of 40% has been maintained for over 2 weeks on the turbine deck
A de-humidifier is used to control humidity for ideal generator rotor conditions

Additional heating can be introduced when required

Workstation fan unit and services penetration point

Custom sizes available
Hire Rates
Are available on request
Low transport costs
No erection costs

http://www.pgsr.com.au	210
http://www.pgsr.com.au:80	1
http://translate.googleusercontent.com	1

PGSR Workstation Presentation

by PGSRAustralia on Jan 24, 2011

Accessibility

Categories

Tags

Upload Details

Usage Rights

3 Embeds 212

Statistics

PGSR Workstation Presentation — Presentation Transcript