This Slide Show is brought to You by
http://allhightech.info/

How to Setup Nintendo Wii
You just got home with your brand new Nintendo Wii, take it out of
the box, and realize that you have no idea how to setup Nintendo
Wii. Well, have no fear this article will walk you through this very
easy process.

Starting to Setup Nintendo Wii
The first step is to figure out how you want your Nintendo Wii to
orient. The Wii can lay one of two ways – horizontally or vertically.
If you decide to place it vertically, you need to place the Wii in the
control plate included with the packaging. When deciding which
way to orient the Wii you have to consider your entertainment
center and what is the best way to lay it out to keep the unit cool.

Plug in your Wii
The next step to setup Nintendo Wii is to plug it into your
television and the wall socket. Check the back, or possibly front of
the television to see what type of audio and visual connectors you
have. Once you determine which connections are available on
your television, setup Nintendo Wii by plugging the right cord into
the Wii then into the television.

AC adapter
Next, take out the AC adapter and plug it into the wall then into the
back of the Wii. This will supply your Wii with power. Make sure
that if you are or plan to travel to Europe that you have the correct
AC adapter. Plugging in the wrong one could cause permanent
damage to your unit, so be careful.

Power and television
Once the power and television are connected to you Wii, the next
step to setup Nintendo Wii is to plug in the sensor bar. Find the
correct jack on the Wii and plug in the cord. You then need to find
a good spot to put the sensor bar so the controllers can properly
orient themselves.

Infrared light
This bar has infrared light emitters in it that need to be picked up
by the controllers, so put it in a spot where there is an
unobstructed line of sight between the controllers and the bar.
Also, make sure that sensor bar is placed in the exact middle of
the television as the controllers will align to this.

Get the controllers working
The next step in to setup Nintendo Wii is to get the controllers
working. Each controller takes 2 double A batteries. Once those
have been placed in the controls, place a game inside the Wii
console and turn it on. Make sure your television is tuned to
channel 3, and that should be it. Follow the onscreen instructions
to set up your controllers and away you go.

This Slide Show is brought to You by
http://allhightech.info/