GeoSoftVN ©
 GEOTECHNICAL SOFTWARE SINCE 2001




             USER’S GUIDE
     < LOGman version 8.0.1 up to date 14 - 05...
GeosoftVN                                                 LogMan 8.0 User’s Guide

                      INTRODUCTION TO L...
GeosoftVN                                                  LogMan 8.0 User’s Guide

                              GETTING ...
GeosoftVN                                               LogMan 8.0 User’s Guide
      Add/Remove Programs icon in the Cont...
GeosoftVN                                                LogMan 8.0 User’s Guide




During the registration the program w...
GeosoftVN   LogMan 8.0 User’s Guide




                                      6
GeosoftVN                                             LogMan 8.0 User’s Guide




STEP 3: We will process this order and m...
GeosoftVN                                                LogMan 8.0 User’s Guide


                              MAIN INTE...
GeosoftVN                                                LogMan 8.0 User’s Guide
Tool Bar

The tool bar is located below t...
GeosoftVN                                                LogMan 8.0 User’s Guide

Data table

All most Logman data store i...
GeosoftVN                                          LogMan 8.0 User’s Guide
When Lithology window active then can edit or i...
GeosoftVN                                              LogMan 8.0 User’s Guide
+       Discontinue description

The above ...
GeosoftVN                                               LogMan 8.0 User’s Guide
To delete borehole data, see the ROW DELET...
GeosoftVN                                               LogMan 8.0 User’s Guide




When this window active user can edit ...
GeosoftVN                                                 LogMan 8.0 User’s Guide

- Cross details windows

Used to input ...
GeosoftVN                                                LogMan 8.0 User’s Guide

- Options windows

Used to configs the w...
GeosoftVN                                                 LogMan 8.0 User’s Guide
All change will available after chose “A...
GeosoftVN                                                LogMan 8.0 User’s Guide

Menu Tools:

Used to choose various conf...
GeosoftVN                                              LogMan 8.0 User’s Guide
+ DRAW BOREHOLE LOG: You must be chose a te...
GeosoftVN                                                LogMan 8.0 User’s Guide

      ORDER TO INPUT DATA AND CREATE THE...
GeosoftVN                                                LogMan 8.0 User’s Guide

2. Project information panel

When begin...
GeosoftVN                                                LogMan 8.0 User’s Guide

4. Boreholes list windows

After complet...
GeosoftVN                                                LogMan 8.0 User’s Guide

5. Boreholes detail windows

Input infor...
GeosoftVN                                                LogMan 8.0 User’s Guide



+ The data area must be kept continued...
GeosoftVN                                              LogMan 8.0 User’s Guide
+     Grade of weathering.

+     Hardness ...
GeosoftVN                                                  LogMan 8.0 User’s Guide
+     Core recovery.

+ RQD:(Rock Quali...
GeosoftVN                                                     LogMan 8.0 User’s Guide
When cross windows active, panel “Cr...
GeosoftVN                                                LogMan 8.0 User’s Guide




7. Set configs of drawing

Before est...
GeosoftVN                                               LogMan 8.0 User’s Guide
+ Hatch Immediate: Chose it if Cross data ...
GeosoftVN                                                LogMan 8.0 User’s Guide



                GENERAL PRINCIPLE TO I...
GeosoftVN                     LogMan 8.0 User’s Guide

            SAMPLE DRAWING

               Borehole Log




       ...
GeosoftVN           LogMan 8.0 User’s Guide

            Cross




                                          32
GeosoftVN                 LogMan 8.0 User’s Guide
            Sample list




                                            ...
GeosoftVN                                            LogMan 8.0 User’s Guide



            SHORT CUT KEYS LISTS FROM LOGM...
GeosoftVN                                                LogMan 8.0 User’s Guide

                    FREQUENTLY ASKED QUE...
GeosoftVN                                                  LogMan 8.0 User’s Guide

6/ I do not like blocks in the drawing...
GeosoftVN                                                 LogMan 8.0 User’s Guide

                                TERMS O...
GeosoftVN                                              LogMan 8.0 User’s Guide
VALIDITY OR LEGALITY OF ANY CONTENT OF A LI...
GeosoftVN                                                 LogMan 8.0 User’s Guide

                              COPYRIGHT...
GeosoftVN                                                LogMan 8.0 User’s Guide

                  OTHER SERVICE OF GEOSO...
Upcoming SlideShare
Loading in …5
×

LogMan 8.0 U S E R G U I D E

559 views

Published on

LogMan 8.0 U S E R G U I D E

0 Comments
1 Like
Statistics
Notes
  • Be the first to comment

No Downloads
Views
Total views
559
On SlideShare
0
From Embeds
0
Number of Embeds
1
Actions
Shares
0
Downloads
7
Comments
0
Likes
1
Embeds 0
No embeds

No notes for slide

LogMan 8.0 U S E R G U I D E

  1. 1. GeoSoftVN © GEOTECHNICAL SOFTWARE SINCE 2001 USER’S GUIDE < LOGman version 8.0.1 up to date 14 - 05 - 2007 > Ü Draw borehole log Ü Draw cross Ü Samples list Ü Data manager GeoSoftVN: 9/A1 Hanoi University of Mining and Geology Dongngac – Tuliem – Hanoi – Vietnam Zip code: 10000 Tel: (84).4.7551119 Website: www.geosoftvn.com E mail: contact@geosoftvn.com
  2. 2. GeosoftVN LogMan 8.0 User’s Guide INTRODUCTION TO LOGMAN LogMan 8.0 (LM8) can be used to quickly create, edit and print geotechnical borehole logs and cross. This software assist the geotechnical investigation in field of geology, engineering geology, geo-environmental engineering, transportation, mining construction. Since the drawings is exported to AutoCAD, the data table is exported(copy) to Microsoft Excell, it can be easily edited to have perfect result. Drawing of borehole, profile create by Autocad the great CAD program. LM8 is a smart(join soil layers), quick, easy to use program. All the data of borehole, cross and other data are stored in only one data file. The number of investigation borehole can be up to thousands (for commercial version), number of Cross in one project, topographical points in one cross, layers, samples, tests are not limited and only depend on your computer system resource. The high drawing speed helps user to have cross and logs printed right away without any edition. The geotechnical cross is drawn by smart algorithm, soil layer are automatically jointed by software. This is only in Logman 5.0 and later version. LOGman has useful interface, user can easy to Copy, Paste data from other program (ex. Microsoft Word, Excel, Notepad) and many format. Even though when the data are in type of drawing (cross section, cross and contour map) the user can easily extract the elevation and distance by utility of topographical data from AutoCad pline. Besides the location of borehole can be put in map quickly and correctly. LOGman have more library of soil and rock pattern. What new in LOGman version 8.0? + Draw graph SPT or RQD in a cross drawing. + Lithology description: Name, color, hardness... Quick select with combo box. 2
  3. 3. GeosoftVN LogMan 8.0 User’s Guide GETTING STARTED Before you begin working with the LM8 program; Check the contents of your distribution package; Make sure you have the necessary equipment; Run the installation program; Then Start the LM8 program Installing LogMan The installation of the LogMan program will depend upon the type of operating system. Before installing the program make sure you have received the entire distribution package and that you have the required equipment. Required Equipment LogMan requires the following hardware and software to run efficiently: · Windows 32 bit 95/98/2000/XP or NT (not include WinME) · At least 32 MB of RAM; · At least 32 MB of hard disk space; · A screen resolution of at least 600 x 800; ( best at 1280x1024) · A CD-ROM drive. Installation –See from LogMan To get LogMan up and running, run the installation program SETUP.EXE on the CD-ROM. For example, to install from drive D: 1. Start Windows 2. Insert the CD-ROM into drive D; 3. Choose File | Run and type D:SETUP.EXE, or double-click on D:SETUP.EXE in Windows Explorer, or double-click on the 3
  4. 4. GeosoftVN LogMan 8.0 User’s Guide Add/Remove Programs icon in the Control Panel and follow the instructions; 4. Input the requested information in the installation forms, discussed in the next section. On some computer systems, depending on how they are configured, inserting the CD- ROM into the drive will automatically start the SETUP.EXE program. The SETUP program does the following: · Creates one or more directories on your hard disk and copies the contents of the LogMan disk into them; · Creates a Windows application group and installs the LogMan, LogMan help, and Read me icons. Requested Information The installation forms will request the following information in order to store the LogMan program in the proper place and register it in Windows: · The directory to put the LogMan program. · The name of the application group to place the LogMan program icons. Uninstalling LogMan The LogMan program files can be removed from your hard disk using the Add/Remove programs option in the Windows Control Panel. Un-installing the LogMan program will also remove the LogMan icons, and application group. Registering and Unlocking LogMan Before LogMan can be used it must be registered. Prior to registration process the program will run in Demo mode (You can save data file but random number e.g Deep 3.45m may be save for 3.56. All text content “Demo” in drawing). Some message box will alert when you update data. 4
  5. 5. GeosoftVN LogMan 8.0 User’s Guide During the registration the program will be unlocked. When buy a registration version user contact us, purchase and download a program for your computer. Note: A computer is hardware include: CPU, main board, hard disk. User can be updated or changed main board, hard disk. With LogMan one License are one CPU. Some demands for user: Create samples of borehole log as: Create samples of borehole log and cross, maintain and upgrade them every months, We always have helpful policies, survey for organizers of, educating and training. Step by Registered STEP 1: Registered member at GeoSoftVN's Website at www.geosoftvn.com. This Step useful for GeoSoftVN manager user, support, update information and must requires if user Purchase by PayPal. Skip this step if user are already GeoSoftVN’s member. STEP 2: Get your system information by LOGMAN. In this step user must install LOGMAN after run LOGMAN chose menu Help > Registered. Fill user name/ company, E mail then click "Generate Order" to create order information. Mail us "Order" with your require about Template of borehole log, cross. Note: User have to run the demo version in the computer which the registered version to be installed. The computer must have no temporary hardware since the information from your computer is legal base for commercial contract of software to be installed in this computer. See this step in next pages: 5
  6. 6. GeosoftVN LogMan 8.0 User’s Guide 6
  7. 7. GeosoftVN LogMan 8.0 User’s Guide STEP 3: We will process this order and make a LogMan registered version for your computer. STEP 4: Purchase when Email requires STEP 5: Download Logman then Re Install 7
  8. 8. GeosoftVN LogMan 8.0 User’s Guide MAIN INTERFACE Screen Areas When you first start the program the main window below will be displayed. The LogMan window will look like below. This window consists of a title bar, menu bar, optional toolbars, desktop, and a status bar. In addition, popup menus can be displayed by clicking the right mouse button Title Bar The title bar is located at the very top of the window and displays the program name, the currently opened project, and the currently opened borehole log. 8
  9. 9. GeosoftVN LogMan 8.0 User’s Guide Tool Bar The tool bar is located below the menu bar and contains the main level of commands in the program. Menu Bar The menu bar is located below the title bar and contains the main level of commands in the program. It uses standard Windows pull-down menus. You can choose any menu item on any submenu that is not dimmed (You can custom LogMan menu and toolbar and save all changed). When the program is first started new data sheet will appear. Panel Some panel for input data, You can drag, expand, collapse it. 9
  10. 10. GeosoftVN LogMan 8.0 User’s Guide Data table All most Logman data store in Table. That very quick with copy, cut, paste. 1. Lithology windows Lithology window is used to Input general information of strata. 10
  11. 11. GeosoftVN LogMan 8.0 User’s Guide When Lithology window active then can edit or in put some thing in “Project information panel” : PROJECT, LOCATION, LOGER and INSPECTOR. These information will be DEFAULTED when it is added one BOREHOLE LOG or new CROSS. Besides, LOGMAN helps adjusting these information to each BOREHOLE or specific cross. Table LITHOLOGY To input the general information about LITHOLOGIES in surveyed area, including: + LAYER name. + LITHOLOGY DESCRIPTION + WEATHERING + HARDNESS of rock + Soil or rock grade + Symbol 1-4: Patterns of soil and rock will showed on the DRAWING, it’s allowable to have some patterns in one layer. E.g : Organic soil, highly weathered Granite. These PATTERNS are used by Autocad and can be written as order from customer. + Fracture of rock (Discontinue density). 11
  12. 12. GeosoftVN LogMan 8.0 User’s Guide + Discontinue description The above information can be automatically selected directly by DEFAULT OPTION in the program or can be selected from many available patterns. 2. Boreholes list windows List all boreholes in project include borehole’s header. E.g : Project name, Borehole name, X coordinate, Y coordinate, Depth of borehole… In order input data you may use this windows after have information of lithology and before make a cross which include some borehole. Table BOREHOLES LIST General information about borehole, including : + BOREHOLE NAME: It is required to have a new hole. The boreholes without name or being deleted will not inputted into database. 12
  13. 13. GeosoftVN LogMan 8.0 User’s Guide To delete borehole data, see the ROW DELETE. to copy borehohe data, see COPY BOREHOHE DATA. + ELEVATION + X COORDINATE (or NORTH) + Y COORDINATE (or EAST) X and Y COORDINATE can be used to locate the borehole position onto the plan map. notice: Any item which is kept blank or error will be defaulted as zero. + WATER LEVEL: The stable ground water level in the borehole if any. + DEPTH: The depth of borehole will be automatically updated during entering the data of layers. It’s not required to input or adjust this item. + SCALE: Scale of borehole logging. + STARTED DATE and FINISHED DATE. 3. Windows to input detail data of borehole and cross. In a order, After inputting general information of boreholes, we choose different specific windows to input data of each borehole or cross. - Borehole details windows Used to input and adjust the information of each hole, including 3 tables and one panel: 13
  14. 14. GeosoftVN LogMan 8.0 User’s Guide When this window active user can edit borehole header from “borehole header” panel. Project, State, Section… was default by project data, but you can change it. Remember it may difference with each other. 14
  15. 15. GeosoftVN LogMan 8.0 User’s Guide - Cross details windows Used to input and manage the data of cross There are 2 types crosses : CROSS and FENCE (little cross) with the same data. When this window active user can configs cross from “Cross configs” panel. Hor. scale, Ver. scale, Draw scale bar… 15
  16. 16. GeosoftVN LogMan 8.0 User’s Guide - Options windows Used to configs the way and value to input data, custom interface. 16
  17. 17. GeosoftVN LogMan 8.0 User’s Guide All change will available after chose “Apply” Menu FILE The menu displays a list of commands for controlling file Menu EDIT The menu displays a list of command to manipulate the data in table, e.g: cut, copy, paste, insert row, delete row. Menu View: Used to Show or hide some panel, windows. 17
  18. 18. GeosoftVN LogMan 8.0 User’s Guide Menu Tools: Used to choose various configuration for the program + Enter DIRECTION :choose direction to move the cursor after inputting the data in one cell. + SPLIT BOREHOLE LOGS: permit user to split the borehole log into many pages in case the size of drawing is too large. + Hatch the layer material for cross section: The program will automatically fill layers with pattern(s) when drawing the cross. + Little cross (fence) only Hatch the layer nearly Borehole. e.g 5m, 10m. + Options: Configs the way to input data and user interface. Menu Draw + START AUTOCAD: Run Autocad to make Boreholes or cross if it has not been started. LogMan can be run Autocad itself. 18
  19. 19. GeosoftVN LogMan 8.0 User’s Guide + DRAW BOREHOLE LOG: You must be chose a template, Windows Boreholes list must be active. TEMPLATE A3, A4: often used in hydraulic or water resource project. TEMPLATE 3,4 (with SPT GRAPH and without SPT GRAPH): often used in civil engineering project + DRAW CROSS: All cross available in lists will be create, if Windows cross are active then only select cross will be create. + LITHOLOGY HATCH: hatch the material of strata with pattern(s) by layer or point selection. + LEGEND: helps to create a table of legends for lithology used in Acad drawing. + INSERT SYMBOL OF BOREHOLE: Locates the borehole position onto map together with notation, elevation and depth. + LIST OF SAMPLES: List all sample in project into Excel file. Menu HELP + Content: Lists the subjects assisted in Help + Author: The information of authors copyright. + Registered: input information to register the program 19
  20. 20. GeosoftVN LogMan 8.0 User’s Guide ORDER TO INPUT DATA AND CREATE THE DRAWING The program is used by the following sequence: · Set configs (for first times only) · Project information panel · Lithology windows · Boreholes list windows · Borehole details windows · Cross windows · Set configs of drawing · Create drawing 1. Set configs For first times to use LogMan 8.0, all configs are default. Set new value if you want, chose menu: Tools > Options. All changed will available at that time. 20
  21. 21. GeosoftVN LogMan 8.0 User’s Guide 2. Project information panel When begin a new project, had better if user fill complete project information. All data will be default for each other borehole or cross. 3. Lithology windows In next step for project user input information describing the general lithology (strata). All data will be default for each other borehole. All boreholes use general lithology description will be update by edit change in this windows. 21
  22. 22. GeosoftVN LogMan 8.0 User’s Guide 4. Boreholes list windows After complete lithology information, user input Boreholes’s header in next step. There are three ways to Input information for each borehole. Complete all boreholes first; move step 5 to input detail of the boreholes or copy borehole data the fix new data. To copy or paste borehole data: Right click on the data row then chose “Copy borehole data” 22
  23. 23. GeosoftVN LogMan 8.0 User’s Guide 5. Boreholes detail windows Input information for each borehole, choose the “borehole data detail” from tool bar or menu View (short cut key is F4) when “borehole windows” active. Chose layer name from Drop down, all soil layer are in project lithology. To add or remove some data, click expand table and user edit change. To update the change, user chose “Update” from toolbar or close this windows. LogMan will ask you want to Update the changed data. Repeat steps 5 with other boreholes. Note: + Update data not mean “Save data” + Logman can Arrange all windows, then quick and easy to input data. + The description of each borehole log can be different from general lithology. Notices: 23
  24. 24. GeosoftVN LogMan 8.0 User’s Guide + The data area must be kept continued and there is no blank (if any blank exists the following rows will be neglected) + The data will only be updated when the name of layer and sample is entered. When we enter the data of boreholes, besides general information about Project, item,... name of layers, and description, etc, some other information can be added for each single borehole. Table 1: Lithology layer : Input data of lithology layer available in the borehole. +Name of layer: Input the name of declared layer in general geological strata. + Bottom of layer: Input the depth of the bottom. + Lithology description : Software will both default value and adjust description. 24
  25. 25. GeosoftVN LogMan 8.0 User’s Guide + Grade of weathering. + Hardness of rock. + Soil and rock grade + Symbol 1-4: If Hatch samples are not valid (Not belong to Autocad ),they will not be drawn) + Discontinuity (Fracture of rock) density + Discontinuity description. LOGman uses maximum available choices while inputting data, therefore it helps to increase the speed and avoid making mistakes. Notice: Borehole log descriptions different from general declaration. If you can put more data to each borehole log if you want. If you want to limit data from the general notices, click SPACE (keyboard) instead of omitting them which helps the program knows that there is no notice here (in order to avoid the case general notices are changed or there is no general notice but you have inputted boreholes data) In that case, the detail data of borehole log have to be changed. Table 2: Samples data Input samples data, including: +Name of samples +Depth from… +Depth to: Depth to is automatically added 0.2 m( It can be define by another ways) Table 3: Text depth data (include SPT data) To Input another information, principles of the depth from…to are required, There can be one or a lot of information in it. + From, To: Depth from ….to… + N1, N2, N3: Blows in SPT standard. 25
  26. 26. GeosoftVN LogMan 8.0 User’s Guide + Core recovery. + RQD:(Rock Quality Designation) + Time for drilling : started and finished time drilling is split by “–“ + Date for drilling, depth : Date for drilling and depth are split by the “-“ + Water loss + Drilling Method 6. Cross windows Input data for each cross. If only draw boreholes log, go to step 7. Chose “Cross data detail” from toolbar ; from Menu View or key F5. + Choose the cross not in the list to create a new data, or the cross in list to modify. + Input or modify the name of the cross 26
  27. 27. GeosoftVN LogMan 8.0 User’s Guide When cross windows active, panel “Cross configs” available. User can set configs for each cross there. + Options for drawing (vertical and horizontal scale) + Distance every from station and elevation. + Parameter cross : Name of cross, horizontal and vertical scale, scale bar on the left, scale bar on the right, drawing samples, Drawing title block... Cross data table: Input and adjust chosen cross data. + Distance: It is odd distance among surveyed boreholes, station of terrain. + Elevation : is Elevation of drilling or station. + Borehole: Name of boreholes in cross. + Station: terrain station is not necessary to contain. + Remark: Notices in terrain (Sewer, storage, km…) Note: User can input data of terrain by the following ways: - If file formed TEXT, open in Excel, Notepad... then Copy and paste data in cross. - If there are horizontal and vertical drawing files of terrain, user can use by putting data of the terrain. Notices: It’s not acceptable to have any blank row, the rows below the blank row will not be updated. 27
  28. 28. GeosoftVN LogMan 8.0 User’s Guide 7. Set configs of drawing Before establishing a drawing on Autocad, it is necessary to put configuration for the program, Those are choices: + Split borehole: Choose menu Tools > Split borehole 28
  29. 29. GeosoftVN LogMan 8.0 User’s Guide + Hatch Immediate: Chose it if Cross data is simple (and all soil layer join more exactly) + Little Cross: A column of Lithology draw nearly Borehole. Note: LogMan can not join layer with 100% exactly, the cross drawing must be check and fix mistake manual by geo-engineering. After fix mistake Soil layer, user can quick hatch by name or select point from drawing. Chose them from toolbar or menu Draw > Hatch pattern. 8. Create drawing Choose the borehole log drawing or cross drawing command from toolbar or menu. Choose a start point to draw on Acad drawing and wait during running process then you will have drawing. 29
  30. 30. GeosoftVN LogMan 8.0 User’s Guide GENERAL PRINCIPLE TO INPUT DATA The data of the program is very important, If you want the program to run correctly, user has to obey some following principles while inputting data in the table. + Input the data and its value correctly. E.g: It is impossible to input the depth of borehole by the signs such as “abc”, scale as” "def".... + Input enough data for creating a drawing. E.g: The cross must be Horizontal and Vertical .SCALE, the Lithology need have layers… Notices: It’s not acceptable to have any blank row, the rows below the blank row will not be updated. In the drawing which is input incorrectly, the data below the blank will not be updated. +To copy borehole data to a new one, all data rows must be copied.(choose rows from its order). 30
  31. 31. GeosoftVN LogMan 8.0 User’s Guide SAMPLE DRAWING Borehole Log 31
  32. 32. GeosoftVN LogMan 8.0 User’s Guide Cross 32
  33. 33. GeosoftVN LogMan 8.0 User’s Guide Sample list 33
  34. 34. GeosoftVN LogMan 8.0 User’s Guide SHORT CUT KEYS LISTS FROM LOGMAN Shortcut key Function F1 Help Alt + F Open Menu file Ctrl+N Create a new file Ctrl+O Open an available file Ctrl+S Save file Alt + E Open editing Menu Ctrl+Z Undo Edit, Cut, Copy or Paste Ctrl+Y Redo Edit, Cut, Copy or Paste Ctrl+X Cut data Ctrl+C Copy data Ctrl+V Paste data Ctrl+F Find or Replace Ctrl+I Insert rows Ctrl+D Cut rows Alt + V Open View Menu F4 Detail window of borehole F5 Detail window of cross Ctrl+1 Show/hide project panel Ctrl+F3 Show/hide Lithology windows F3 Show/hide Borehole list windows Ctrl+2 Show/hide Borehole header panel Ctrl+3 Show/hide Cross configs panel Alt + T Open Menu Tools Alt + D Open Menu Draw Alt + W Open Menu Window Alt + H Open Menu Help 34
  35. 35. GeosoftVN LogMan 8.0 User’s Guide FREQUENTLY ASKED QUESTIONS. 1. What is LOGman used to? LOGman program is used to manage data for engineering geology cross of each project, set up results quickly for those surveys in the from of drawing which assists the geotechnical investigation in field of geology, engineering geology, geo- environmental engineering, transportation, mining construction… 2. Borehole log. Now, LOGman 8.0 does not assist a lot of borehole log samples but depends on customer. 3/ Required system Win 32 bit ( From Win 95 and later) Install Acad 2000 and later version. User should use Logman with speed 400 MHz 64 MB RAM and ( not compulsory) 4/ What should I do to increase the drawing speed. You should start Acad2000 up before running LOGman (However, it is only your feeling) LOGman wastes less time if it is drawn on a new DWG file. User should not run on current file with large size ones. 5/Which orders I need to obey? Input strata data Input data of borehole logs. Establish a name of cross, Input data of terrain, put borehole into cross, update the data of that cross. Establish parameters of the cross. Therefore, draw the cross. 35
  36. 36. GeosoftVN LogMan 8.0 User’s Guide 6/ I do not like blocks in the drawing? The reason is that you are not used to use block, the benefit from block is huge, e.g: it is very simple to rub out the whole of elevation and depth of bottom layer or incase you want all the names of boreholes, elevation, depth, co-ordinate of hand boreholes or enlarger 1,2 on drawing …if you use block and there are a lot of other usefulness from block. 7/ I needn’t use Block? If you use Explode blocks, result only is tag, the value of attribute will have been disappeared. You must use the key Explode attributes to Text on Autocad menu ‘Express >Blocks > Explode attributes to Text’. It is OK.. 8/ I want to input data more than existing rows ? Click right mouse, choose ‘Insert Row’ which is also used to insert sample, other experiment. 9/ How to share data between each other project? Logman 8 is MDI software, but can not work with more project at time, because that simple to manager data for user. The way share data is: Run two or more LogMan at one time then Copy from and Paste each other. 36
  37. 37. GeosoftVN LogMan 8.0 User’s Guide TERMS OF USE GRANT, RESTRICTIONS, AND OWNERSHIP GEOINFORMATICS SOFTWARE SOLUTION and TECHNOLOGY SERVICES., JSC. and its suppliers, as applicable ("GeoSoftVN"), hereby grant you the right to use the content comprising the this document and GeoSoftVN's website (the "Content"). You may print the Content on GeoSoftVN's website intact from within your browser for personal and fair use purposes only. The Content has been compiled by GeoSoftVN from a variety of sources, and is subject to change without notice. SOFTWARE Specifically, but without limitation, any computer software downloadable or otherwise available through GeoSoftVN's website is licensed subject to the terms and conditions of its own applicable license agreement, and specific terms and conditions applicable to Software in download licenses within GeoSoftVN's website or otherwise available through GeoSoftVN's website will supersede the provisions of these Terms Of Use. The use of certain areas of GeoSoftVN's website is further restricted to GeoSoftVN's support customers. You may not copy, adapt, modify, display, perform, or otherwise use the Content (including use the Content on any other web site or networked computer environment) for any other purpose or in any other manner without the prior express written permission of GeoSoftVN's or its suppliers, including without limitation such permission as may appear within GeoSoftVN's website. You agree that the Content is the proprietary information of GeoSoftVN and/or its suppliers, and that you will conform your access, copying, and use of particular Content to the applicable GeoSoftVN's website purposes indicated in association with the particular Content. LINKS WITH OTHER SITES GeoSoftVN's is not responsible for the content of any other web site linked to or from GeoSoftVN's website. If you link to another site, you may leave GeoSoftVN's. If you decide to link to another site, you do so entirely at your own risk. GeoSoftVN may provide links from the website to other sites, but this is done solely as a convenience to you and in no way should be interpreted as a referral or endorsement of any content, sponsor or owner of any other site. ALL WARRANTIES, CONDITIONS OR OTHER TERMS EXPRESS OR IMPLIED AS TO ANY SUCH LINKED SITE, INCLUDING WITHOUT LIMITATION AS TO ACCURACY, OWNERSHIP, 37
  38. 38. GeosoftVN LogMan 8.0 User’s Guide VALIDITY OR LEGALITY OF ANY CONTENT OF A LINKED SITE, ARE HEREBY EXCLUDED. DISCLAIMER THE CONTENT PROVIDED AT THIS WEBSITE IS PROVIDED "AS IS" AND ANY WARRANTY, CONDITION OR OTHER TERM OF ANY KIND INCLUDING WITHOUT LIMITATION ANY WARRANTY OR CONDITION OF MERCHANTABILITY, SATISFACTORY QUALITY, SECURITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE OR NON-INFRINGEMENT OF INTELLECTUAL PROPERTY IS HEREBY EXCLUDED. Applicable law may not allow the exclusion of implied warranties, so the above exclusion may not apply to You. GeoSoftVN does not warrant the accuracy and completeness of the Content on the website. GeoSoftVN takes no responsibility for viruses or other destructive or intrusive computer programs that may damage your computer system or data resulting from your access to or use of the website. LIMITATION OF LIABILITIES IN NO EVENT WILL GEOSOFTVN OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, THOSE RESULTING FROM LOST PROFITS, LOST DATA OR BUSINESS INTERRUPTION) ARISING IN RELATION TO THESE TERMS OF USE AND/OR THE USE, INABILITY TO USE, OR THE RESULTS OF USE OF GEOSOFTVN's WEBSITE, THIS WEBSITE, ANY WEB SITES LINKED TO THIS WEBSITE, OR THE CONTENT CONTAINED AT ANY OR ALL SUCH SITES, WHETHER BASED ON WARRANTY, CONTRACT, TORT OR ANY OTHER LEGAL THEORY AND WHETHER OR NOT GEOSOFTVN IS ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IF ANY OF THE FOREGOING RESULTS IN THE NEED FOR SERVICING, REPAIR OR CORRECTION OF HARDWARE, SOFTWARE AND/OR DATA, YOU ASSUME ALL COSTS RELATED DIRECTLY AND/OR INDIRECTLY THERETO. APPLICABLE LAW MAY NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. However, in accordance with the paragraph of these Terms Of Use entitled SOFTWARE, specific terms and conditions applicable to Software downloadable or otherwise available through GeoSOftVN's website will supersede the provisions of this paragraph. CHANGE "TEAM OF USE" IN FUTURE The Content "TEAM OF USE" has been compiled by GeoSoftVN from a variety of sources, and is subject to change without notice. 38
  39. 39. GeosoftVN LogMan 8.0 User’s Guide COPYRIGHT NOTICE Copyright © 2002 GeoSoftVN., JSC (GeoSoftVN). All rights reserved The software contains proprietary information of GeoSoftVN. It is provided under a license agreement containing restrictions on use and disclosure and is also protected by copyright law. Reverse engineering of the software is prohibited. - User does not allow to present or sell to any one. - User does not change the program. - User only allows to try it on within 30 days, then uninstall program in computer. Due to continued product development this information may change without notice. The information and intellectual property contained herein is confidential between GeoSoftVN and the client and remains the exclusive property of GeoSoftVN. If you find any problems in the documentation, please report them to us in writing. GeoSoftVN does not warrant that this document is error-free. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise without the prior written permission of GeoSoftVN. LogMan is not a registered trademark of GeoSoftVN and it may be change in the future without notice. GeoSoftVN 9/A1 Hanoi University of Mining and Geology Dongngac – Tuliem – Hanoi – Vietnam Zipcode:10000 Tel: (84).4.7551119 Website: www.geosoftvn.com E mail: support@geosoftvn.com 39
  40. 40. GeosoftVN LogMan 8.0 User’s Guide OTHER SERVICE OF GEOSOFTVN: - If Any geological strata, borehole log, other cross samples are ordered, we will be very pleased to give you. - Other programs in geotechnical field. GRAIN 4.3: Soil samples calculator ( mathematics statistics, standard, values according to 2 limited states) - Programs for AutoCad: + ACADplot : Manage printing simply and fast…. + Create Hatch pattern for AutoCAD + Manage block - Web design: + Joomla template : GeoSoftVN design Web template for Joomla’s CMS. Fore more information about Joomla visit www.joomla.com. Thank you for caring about our program. See you again in new version! * * * 40

×