Cablecatalog
Upcoming SlideShare
Loading in...5
×

Like this? Share it with your network

Share
  • Full Name Full Name Comment goes here.
    Are you sure you want to
    Your message goes here
    Be the first to comment
    Be the first to like this
No Downloads

Views

Total Views
917
On Slideshare
917
From Embeds
0
Number of Embeds
0

Actions

Shares
Downloads
7
Comments
0
Likes
0

Embeds 0

No embeds

Report content

Flagged as inappropriate Flag as inappropriate
Flag as inappropriate

Select your reason for flagging this presentation as inappropriate.

Cancel
    No notes for slide

Transcript

  • 1. Table of Contents Page 1 Table Of Contents Cable Connectors & Accessories Page 2 NEW AND FEATURED PRODUCTS NEW FLEXYGY 8-PAIR SNAKE CABLE Page 43 Cable Connectors & Accessories Introduction Page 44 Neutrik Audio XLR Cable End Connectors Cable Assemblies Page 45 Neutrik Audio XLR Receptacles and Accessories Page 46 Neutrik Audio Jacks and Plugs Page 3 Cable Assemblies Introduction Page 47 Neutrik Audio Jacks and Plugs Page 4 HAVEFlex DB25 8 Channel Audio Snakes Page 48 Neutrik Audio Speakon Connectors Page 5 HAVEFlex 8 Channel Audio Snakes Page 49 Canare Audio Connectors & Impedance Transformers Page 6 HAVEFlex Digital/Optical Audio Cables Page 50 Cannon Multi-pin Audio Connectors Page 7 HAVEFlex Speaker Cables Page 51 D-Sub & EDAC Multi-pin Connectors Page 8 HAVEFlex Mic and Line Cables Page 52 HAVE Audio Connectors & Adapters Page 9 FLEXYGY Mic and Line Cables Page 53 Canare Multi-pin and Triax Connectors, Accessories Page 10 HAVEFlex and FLEXYGY Audio Interconnects Page 54 Canare Video Receptacles and Adapters Page 11 HAVEFlex, FLEXYGY, Canare and Neutrik Audio Page 55 Canare Video Crimp Connectors Patch Cables Page 56 ADC Video Crimp Connectors Page 12 HAVEFlex Y, Insert and Midi Cables. HAVE Value Page 57 Neutrik Video and Data Connectors Audio Cables Page 58 HAVE Video Connectors and Adapters Page 13 Canare Audio Cable Systems Page 14 HAVE Audio Cable Systems Audio/Video Racks & Patchbays Page 15 HAVE’s Guild Custom Cable Shop Page 16 PROFlex VGA Video Cables Page 59 Audio/Video Racks & Patchbays Introduction Page 17 PROFlex Triax Cables Page 60 Audio Accessories Patchbays Page 18 PROFlex Multichannel Video Cables Page 61 Audio Accessories and Neutrik Patchbays Page 19 PROFlex Digital Multichannel Video Cables Page 62 AVP Morph Audio Patchbays Page 20 PROFlex Single Channel Video Cables Page 63 AVP RPT Audio Patchbays Page 21 PROFlex S-Video Cables, S-Video Bulk Cable & Connectors Page 64 ADC Audio & Video Patchbays Page 22 Video Patch Cables. HAVE Value Video Cables Page 65 Canare A/V Bulkhead Panels Page 23 DVI and HDMI Cables Page 66 Canare Mid-Size Video Patchbays, Jacks & Patch Plugs Page 24 Gefen HDTV, Optical DVI, Fiber Optic and Cat-5E Cables Page 67 Canare Video Patchbays, Jacks and Patch Plugs Page 25 PROFlex Data Cables. HAVE Molded VGA, Page 68 AVP Video Patchbays, Blank Panels Computer Cables Page 69 AVP Universal Bulkhead Panels, AVP Video Jacks Page 26 Firewire and USB Cables Page 70 Middle Atlantic Rack Enclosures Page 71 Middle Atlantic Racks and Power Products Bulk Audio & Video Cable Page 72 Middle Atlantic Rack Shelves & Accessories Page 73 Middle Atlantic Rack Cooling Products & Accessories Page 27 Bulk Audio & Video Cable Introduction Page 74 Middle Atlantic Modular Panel Systems Page 28 Canare Audio Microphone and Line Cable Page 75 HAVE Custom Wall Plates & Junction Boxes Page 29 Canare Audio Instrument and Speaker Cable Page 76 Wall Plates & Outlets Page 30 Canare Audio Multichannel Snake Cable Page 31 Canare Digital Audio and Data Cable Tools & Accessories Page 32 FLEXYGY Audio Cable Page 33 Canare Combo Audio/Video Cable Page 77 Tools & Accessories Introduction Page 34 Gepco Audio Cable Page 78 Canare Cable Reels and Cable Rack Page 35 Mogami Audio Cable Page 79 Canare Tool Kits Page 36 Belden Audio Microphone and Snake Cable Page 80 Canare Cable Tools, Cases Page 37 Belden Digital Audio and Speaker Cable Page 81 HAVE, Trompeter and Paladin Cable Tools Page 38 Belden Home Automation, CAT 5, CAT 6, & Data Cable Page 82 AVP Cable Tools, Gaffer’s Tape Page 39 Belden Video Coaxial Cable Page 83 Flexible Sleeving and Heatshrink, Bench Tools Page 40 Canare Video Coaxial Cable Page 84 Solder & Soldering Tools Page 41 Canare Video Multichannel Coaxial Cable Page 85 Cable Ties and Organizers Page 42 Gepco Video Coaxial and Triax Cable Page 86 WireTracks Channel National Order Line: 24 Hour Fax Orderline: West Coast Sales & Service: have@haveinc.com800-999-HAVE (4283) 518-828-2008 661-266-1624 store.haveinc.com
  • 2. Cable Assemblies 3 Why HAVE Cable Assemblies? Experience….Quality….the Personal Touch! Experience, quality and the personal touch, are the reasons why HAVE Cable Assemblies can be found in venues like Lincoln Center or in Olympic arenas, and installed in industry applica- tions from boardrooms and broadcast to Hollywood … All HAVEFlex, PROFlex, custom cables or manufactured products are built with one thing in mind: You the customer, and making sure that the product we make for you doesn’t “just work”, but is PERFECT for your application and OUTSTANDING in every aspect and detail. We strive to keep both eyes on quality and longevity for every cable or product we handcraft… the reason why our entire line of HAVE manufactured cables come with a Lifetime Guarantee. Premium Quality Manufacturing Components HAVE uses only the highest quality components in all our manufactured products. This includes not only the bulk cable and connectors we use, but also the tools, solder, and everything else that goes into making assemblies that LAST and PERFORM. We’re full stocking distributors for the best bulk cable and component manufacturers in the business, ensuring that the assemblies you need will be here and ready when you need them. This also goes for our HAVE manufac- tured wall plates, stage boxes, custom snake assemblies, loaded cable reels, patchbays, YOU NAME IT! Quality Control and Testing Quality control and testing doesn’t begin when the manufac- turing process ends. We rigorously inspect all components visually BEFORE we begin assembly, leaving nothing to chance. When complete, each assembly is again visually inspected, then tested for continuity, and intermittent problems like opens, shorts, and cross wires. We utilize a fully equipped quality control test bench with state-of-the-art testing equipment to ensure that EVERY HAVE cable assembly doesn’t just “work”, it performs to spec each and every time. Turnaround and Delivery We’ve been in the industry since 1977, and really know how CABC0705-9 crucial delivery and lead times are to your business or installa- tion. So whether you need one or one thousand of our off the shelf high performance assemblies, or we’re working with you on design of an intricate custom cable, our sales and manufacturing teams work in concert to seamlessly complete your order on time. Over the next few pages you’ll see just how deep our high performance line of assemblies are...HAVEFlex Audio...Flexygy™ Audio...PROFlex Video. Try them! They’re GREAT!! National Order Line: 24 Hour Fax Orderline: West Coast Sales & Service: have@haveinc.com800-999-HAVE (4283) 518-828-2008 661-266-1624 store.haveinc.com
  • 3. 4 Multichannel Audio Cable Assemblies DB-25 8 Channel Snake Cables What sets HAVE’s premium quality DB25 8-channel snakes apart from all the rest? Hand-assembly in our own Upstate NY guild shop, pride of workmanship, commitment to excellence, and years of experience! Perfect for Pro Tools users and for Digidesign’s I/O systems & consoles. Also great for Tascam and Fostex compatible DA-88 applications to meet all your I/O needs. • Professional quality Neutrik and Canare connectors • Professional heavy duty DB25 pin connectors for great contact and durability • Available in 6, 10, 15, 20, 25, 50, 75, and 100 lengths • Unbalanced DB25-RCA or DB25-1/4” Phone Mono Male also available in 6, 10, 15, 20, 25, and 50 lengths • Custom lengths are available to your specifications • 24AWG copper conductor - 8 twisted pair cable • Your choice of either quality cable: Canare MR202 or Belden 1512C • All come with STANDARD screws. Please specify when ordering if METRIC screws are required. • All come with our HAVEFlex Limited Lifetime Warranty Handcrafted Quality - Dont Compromise! DB25 - DB25 Pin Connector 20DA88512-DB25 DB25 - XLR Female 20DA88512-DB25XJ 20DA88202-DB25 20DA88202-DB25XJ 20DA88512-DB25 Made with Belden 1512C cable. 20DA88202- 20DA88512-DB25XJ Made with Belden 1512C cable. 20DA88202- DB25 made with Canare MR202 cable. DB25XJ made with Canare MR202 cable. ----------------------------------------------------------- ---------------------------------------------------------- ----------------------------------------------------------- ---------------------------------------------------------- DB25 - (8) XLR Male 20DA88512-DB25XP DB25 - (8) 1/4" Stereo 20DA88512-DB25TRS 20DA88202-DB25XP Phone Male T/R/S* 20DA88202-DB25TRS 20DA88512-DB25XP Made with Belden 1512C cable. 20DA88202- 20DA88512-DB25TRS Made with Belden 1512C cable. 20DA88202- DB25XP made with Canare MR202 cable. DB25TRS made with Canare MR202 cable. Typical DB25 Pinout HAVE is proud to be a Digidesign® Development Partner! We offer a full-line of HAVEFlex cables, perfect for Pro Tools® users and for Digidesign’s I/O systems and consoles! All Digidesign images ©2004 Avid Technology, Inc. All rights reserved. All Digidesign trademarks are registered trademarks of Avid Technology, Inc. Digidesign does not test or provide support for HAVE, Inc. products National Order Line: 24 Hour Fax Orderline: West Coast Sales & Service: have@haveinc.com 800-999-HAVE (4283) 518-828-2008 661-266-1624 store.haveinc.com
  • 4. Multichannel Audio Cable Assemblies 5 8 Channel Multichannel Snakes HAVEs handcrafted 8-channel audio snake cables compliment our full line of DB25 snakes for Digidesign and other users. Two full series are available in standard lengths and made with your choice of premium Canare cable optimized for fixed studio applications, or with premium Gepco X-Band cable optimized for portable applications. Both series are made with the best Canare and Neutrik connectors. • Fixed configurations are made with Canare MR202AT series, 25AWG stranded copper conductors, 8 twisted pair cable. Pairs are individually shielded (100% foil) and jacketed. • Portable configurations are made with Gepco X-Band XB408, 24AWG stranded oxygen free copper conductors, 8 twisted pair cable. Pairs are individually shielded (95% braid) and jacketed. • No more jumbles of multitrack cables, and great for DB25 Snake extensions • Color coded for easy and fast identification and bundled under one jacket making leads easy to trace and easy to change • Great for Tascam and Fostex compatible DA-88 applications to meet all your I/O needs • Available in standard 6, 10, 15, 20, 25, 35’, & 50 lengths; balanced configurations also available in 75 and 100 lengths. Custom lengths available to your specifications! • All come with our HAVEFlex Limited Lifetime Warranty Balanced Configuration: Fixed Applications Unbalanced Configuration: Fixed Applications Made with Canare MR202AT cable. Made with Canare MR202AT cable. 208SN202-TRS 1/4" Phone T/R/S - 1/4" Phone T/R/S 208SN202-TS 1/4" Phone T/S - 1/4" Phone T/S 208SN202-TT 1/4" Bantam T/R/S - 1/4" Bantam T/R/S 208SN202-TSRCA 1/4" Phone T/S - RCA 208SN202-XMTT XLR Male - 1/4" Bantam T/R/S 208SN202-RCA RCA - RCA 208SN202-XFTT XLR Female - 1/4" Bantam T/R/S 208SN202-XMRCA XLR Male - RCA 208SN202-XMTRS XLR Male - 1/4" Phone T/R/S 208SN202-XFRCA XLR Female - RCA 208SN202-XFTRS XLR Female - 1/4" Phone T/R/S 208SN202-XMTS XLR Male - 1/4" Phone T/S 208SN202-XMF XLR Male - XLR Female 208SN202-XFTS XLR Female - 1/4" Phone T/S ----------------------------------------------------------- ---------------------------------------------------------- ----------------------------------------------------------- ---------------------------------------------------------- Balanced Configuration: Portable Applications Unbalanced Configuration: Portable Applications Made with Gepco XB408 X-Band cable. Made with Gepco XB408 X-Band cable. 208SN408-TRS 1/4" Phone T/R/S - 1/4" Phone T/R/S 208SN408-TS 1/4" Phone T/S - 1/4" Phone T/S 208SN408-TT 1/4" Bantam T/R/S - 1/4" Bantam T/R/S 208SN408-TSRCA 1/4" Phone T/S - RCA 208SN408-XMTT XLR Male - 1/4" Bantam T/R/S 208SN408-RCA RCA - RCA 208SN408-XFTT XLR Female - 1/4" Bantam T/R/S 208SN408-XMRCA XLR Male - RCA 208SN408-XMTRS XLR Male - 1/4" Phone T/R/S 208SN408-XFRCA XLR Female - RCA 208SN408-XFTRS XLR Female - 1/4" Phone T/R/S 208SN408-XMTS XLR Male - 1/4" Phone T/S 208SN408-XMF XLR Male - XLR Female 208SN408-XFTS XLR Female - 1/4" Phone T/S PRE CABC0705-9 96i National Order Line: 24 Hour Fax Orderline: West Coast Sales & Service: have@haveinc.com800-999-HAVE (4283) 518-828-2008 661-266-1624 store.haveinc.com
  • 5. 6 Digital Audio Cable Assemblies Digital Audio Snakes Precision Coax SPDIF Our HAVEFlex handcrafted 110-ohm digital audio snakes are perfect for multiple channel transmission of 110-ohm AES/EBU digital audio data. Digital Audio Cable Made with Gepco’s flexible precision 5526 series digital snake cable, We handcraft our HAVEFlex Precision 75-ohm SPDIF cables with Neutrik XLR’s and professional quality DB25 connectors. Ideal for multi- Belden 1694A Brilliance digital coax cable because its engineered channel AES breakouts from AD/DA converters, digital mixers, or digital for low signal loss over long distances, and its three layer multi-track recorders. Other configurations including ELCO connectors shielding offers the best protection against EMI and RFI. And we are available as custom, please call with your needs! use Canare RCA connectors for the best possible impedence match with 75-ohm coax cable. 4 XLR Male - 4 XLR Female 204DSN526-XMF SPDIF Digital Audio Cable 208000D-BLA 8 XLR Male - 8 XLR Female 208DSN526-XMF DB25 - 4 XLRM & 4 XLRF 208DSN526-DB25XMF • Made with flexible Belden 1694A and Canare RCA connectors with matching rubber flexible boots. • Gepco 110-ohm AES/EBU twisted pair 5526 series cable. • RG6/U type Brilliance cable, with 18AWG Solid Copper center • Ends are terminated with Neutrik XLR’s and or DB25 D-sub conductor. multipin connectors. • Two foil shields (bonded by polyester tape) and outer copper • Pairs are precision twisted with a non-conductive polyethylene braid shield. filler rod, shielded, and isolated with color-coded pair jackets. • Conductor DCR: 6.4 ohms/1000’ ; Shield DCR: 2.8 ohms/ • Gepco’s cable construction techniques lower attenuation, 1000’; Nominal Capacitance: 16.2 pF/ft. minimize crosstalk, and stabilizes the impedance, reducing • Application: SPDIF Digital Audio Interconnect cable induced bit-errors and jitter. • Color: Black (other colors available by special order, please call • EDAC multi-pin connectors are also available as a custom or e-mail) order, please call! • Standard lengths of 2’, 3’, 6’, 10’, 15’, 25’, 35’, 50’, 75’, • Ideal for multi-channel AES breakout from AD/DA converters, 100’ digital mixers, or digital multi-track recorders. • Standard lengths of 6’, 10’, 15’, 20, 25’, 35’, 50’, 75’, 100’ TOSLINK Digital Optical Cables Shop online! You wont find a better Toslink cable than ours. You’ll love the difference quality makes in your system! Toslink cables are fiber optic store.haveinc.com cables that carry Digital audio data in the form of light pulses rather than using electricity. Light pulses eliminate distortions caused by capacitance, inductance and resistance of wire cables. Digital Optical TOSLINK Digital 110Ω AES/EBU Cable Made with Canare DA206 110 ohm digital audio cable and Neutrik gold XLR connectors. Use this cable between your transport and D/A converter in AES/EBU standard systems, and for digital dubbing and digital audio workstations. This cable is also great in pairs for balanced analog audio for greater resis- tance against noise and for long runs. Color: blue. • Gold Plated metal ends, metal ferrule protects fiber (not plastic XLR Male - XLR Female 201000D like all the others) • Fiber covered with 2 outer jackets (to prevent kinking) • Finest plastic fiber available • Metal Backshell and Highly polished ends • Extremely flexible with bend radius of 17mm or greater • Standard Backshell Color: Silver (Blue, Gold Yellow, Light Brown, Violet, Red available only as a special order) • Available in 1, 2, 3, and 5 meter lengths. (Other lengths available as special order) • Available in standard 2, 6, 10, 15, 25, 50, 75, 100, 200, and 300 lengths. National Order Line: 24 Hour Fax Orderline: West Coast Sales & Service: have@haveinc.com 800-999-HAVE (4283) 518-828-2008 661-266-1624 store.haveinc.com
  • 6. Speaker Cable Assemblies 7 Speaker Cables NEW! HAVEFlex speaker cables are hand-crafted using Canare Star Quad 4S11 and 4S8 4-conductor cable. • Perfect for the most demanding power amplifier to speaker runs, long runs, and power amplifier to passive sub-woofer assemblies • Star Quad virtually eliminates electromagnetic interference • Minimum resistance and excellent frequency response due to low capacitance • Standard configurations of Spade, HAVE Locking Banana, Speakon, 1/4”, Pin, or blunt ends • Some Bi-Wire configurations available, please call • Available in standard lengths of 3’, 6, 10, 15, 25, 35’, 40, 50, 75’, &100 • All come with our HAVEFlex Limited Lifetime Warranty 11AWG Spade - Spade 20SP4S11-SS 13AWG Spade - Spade 20SP4S8-SS HAVE LOCKING BANANAS 20SP4S11-SS also available in bi-wire configuration; replace -SS with -BWSS. ----------------------------------------------------------- ---------------------------------------------------------- 11AWG Tinned - Tinned 20SP4S11-TT 11AWG Banana - Banana 20SP4S11-BB 13AWG Tinned - Tinned 20SP4S8-TT 13AWG Banana - Banana 20SP4S8-BB Made with HAVE Locking Bananas! See Pg 52 20SP4S11-TT also available in bi-wire configuration; replace -TT with 20SP4S11-BB also available in bi-wire configuration; replace -BB -BWTT. with -BWBB. ----------------------------------------------------------- ---------------------------------------------------------- ----------------------------------------------------------- ---------------------------------------------------------- 13AWG Speakon - Speakon 2 Pole 20SP4S8-2P 11AWG Pin - Pin 20SP4S11-PP 13AWG Speakon - Speakon 4 Pole 20SP4S8-4P 13AWG Pin - Pin 20SP4S8-PP 13AWG Banana - Speakon 2 Pole 20SP4S8-2P-B 13AWG Speakon - 1/4" Plug 20SP4S8-2P-TS 13AWG 1/4" Plug - 1/4" Plug 20SP4S8-TS Great for CABC0705-9 Monitors! 20SP4S11-PP also available in bi-wire configuration; replace -PP with -BWPP. Made with Neutrik Speakon NL2FC, NL4FC, and/or Canare 1/4" T/S 11AWG 20SP4S11 made with connectors. Canare4S11 13AWG 20SP4S8 made with We can customize to any length - please call! Canare 4S8 National Order Line: 24 Hour Fax Orderline: West Coast Sales & Service: have@haveinc.com800-999-HAVE (4283) 518-828-2008 661-266-1624 store.haveinc.com
  • 7. 8 Mic & Line Cable Assemblies Professional Mic & Line Cables HAVE manufactures our prized mic and line cables with super flexible Canare Star Quad L-4E6S or Canare L2T2 2-conductor Your choice of cable - cable and Canare and Neutrik connectors. Star Quad 201000 series or • Excellent for mic cables, line level interconnects between 2-conductor 20L200 pro equipment, mixers, or line level patching 0 series! • Canare Star Quad for reduced hum and EMI • Canare L2T2S for total flexibility and low noise • Low resistance, high density shield for superior resistance to electrostatic noise • Special PVC jacket and IPE insulation ensure durability Pro! • Long throw connectors designed for easier handling • Available in standard 2, 6, 10, 15, 25, and 50 lengths. Custom lengths available on request! • 2-conductor L2T2S versions available in black only • Star Quad versions available in all 10 Canare colors** • All come with our HAVEFlex Limited Lifetime Warranty XLR Male - XLR Female 201000 Canare 201000BG Mini T/R/S 20L2000 Lo-Z balanced mic cables, line level interconnect between professional audio and video equipment. Great for camera-mounted mics to camera mic inputs. 201000 made with L4E6S; 201000BG comes with Neutrik T/R/S Neutrik black and gold connectors. 20L2000 made with L2T2S. ----------------------------------------------------------- ---------------------------------------------------------- XLR Male - RCA 201005 Neutrik T/S 20L2005 Canare RCA Connect output of industrial and older equipment to XLR inputs of newer professional equipment and mixers. 201005 made with L4E6S. Neutrik XLR Jacks 20L2005 made with L2T2S. 1/4" T/R/S* - 1/4" T/R/S* 205001 ----------------------------------------------------------- ---------------------------------------------------------- 20L2011 XLR Male - Mini T/S* 201006 Interconnect balanced outputs and inputs of some mixers and 20L2006 audio processors. These can also be used in patch bays, but we Connect output of older portable equipment to inputs of pro recommend our lower profile HAVEFlex long frame series on pg equipment. 201006 made with L4E6S. 20L2006 made with L2T2S. 11. 205001 made with L4E6S. 20L2011 made with L2T2S. ----------------------------------------------------------- ---------------------------------------------------------- ----------------------------------------------------------- ---------------------------------------------------------- XLR Male - 1/4" T/S* 201007 XLR Male - 1/4" T/R/S* 205100 20L2007 20L2001 Connect output of connectored patch bay and some Connect balanced output of equipment to balanced inputs of some mixers to input of newer professional equipment. 201007 mixers, audio processors, and 1/4" connectored low density patch bays. made with L4E6S. 20L2007 made with L2T2S. 205100 made with L4E6S. 20L2001 made with L2T2S. ----------------------------------------------------------- ---------------------------------------------------------- ----------------------------------------------------------- ---------------------------------------------------------- XLR Female - RCA 201008 XLR Female - 1/4" T/R/S* 205200 20L2008 20L2002 Connect output of mics, or pro equipment and mixers to unbalanced Connect balanced output of equipment to balanced inputs of some inputs. 201008 made with L4E6S. 20L2008 made with L2T2S. mixers, audio processors, and 1/4" low density patch bays. 205200 ----------------------------------------------------------- ---------------------------------------------------------- made with L4E6S. 20L2002 made with L2T2S. XLR Female - Mini T/S* 201009 ----------------------------------------------------------- ---------------------------------------------------------- 20L2009 XLR Male - Mini T/R/S* 205300 Connect output of mics, pro equipment, and mixers to mic or line 20L2003 inputs of older equipment. 201009 made with L4E6S. 20L2009 Great for connecting balanced output of equipment to balanced inputs of made with L2T2S. some mixers, audio processors that have mini TRS connectorization. ----------------------------------------------------------- ---------------------------------------------------------- ----------------------------------------------------------- ---------------------------------------------------------- XLR Female - 1/4" T/S* 201010 XLR Female - Mini T/R/S* 205400 20L2010 20L2004 Connect output mics or professional equipment to mic inputs or Great for connecting balanced output of equipment to balanced inputs of unbalanced inputs of 1/4" connectored low density patch bays. some mixers, audio processors that have mini TRS connectorization. 201010 made with L4E6S. 20L2010 made with L2T2S. **Black, red, & blue are stocked colors. Other colors (brown, gray, green, orange, purple, white, & yellow) may require a longer turnaround time. National Order Line: 24 Hour Fax Orderline: West Coast Sales & Service: have@haveinc.com 800-999-HAVE (4283) 518-828-2008 661-266-1624 store.haveinc.com
  • 8. Mic & Line Cable Assemblies 9 Flexygy Mic & Line Cables We’re proud to offer these exciting new FLEXYGY™ audio cable assemblies as part of our exclusive distributorship of the Canare RCA FLEXYGY™ line of cables. Handcrafted with FLEXYGY™ 2T2NTS high-performance 2-conductor microphone cable and premium Neutrik and Canare connectors. The cables 41-strand 24 AWG conductors and high-density spiral tinned-copper shield make these assemblies totally flexible, while magnificently reducing handling noise, the bane of all mic cables. Plus FLEXYGY™ assemblies offer extremely low conductor DCR, facilitating much Canare higher performance. FLEXYGY™ 2T2NTS 2-conductor assemblies Mini T/R/S are dressed in a supple deep purple “Nightshade” jacket, making them perfectly unobtrusive yet elegant on any stage • 24 AWG, 41 strand Tinned Coper conductors for max flexibility and reduced handling noise. Neutrik XLR Jacks • Special compound PVC outer jacket resists cracking even in sub-zero applications. • Conductor DC resistance of 14.3 ohms/1000ft. • Hand assembly with true silver solder • Cadmium & Lead free! NEW! Neutrik T/S • Standard lengths of 2, 6, 10, 15, 25, 50 and 100 Ultra flexible 2-cond • Exclusive NIGHTSHADE color (bordering on stage black) uctor cable. Lead and Cadmium free, Neutrik T/R/S and economical, too! XLR Male - XLR Female 20FLX2000-NTS 20FLX2000BG-NTS Perfect for all microphone use and great for camera-mounted mics to XLR Male - Mini T/S* 20FLX2006-NTS camera mic inputs. BG made with Neutrik black & gold connectors. ----------------------------------------------------------- ---------------------------------------------------------- Perfect for all microphone use and great for connecting output of XLR Male - 1/4" T/R/S* 20FLX2001-NTS older portable equipment to inputs of pro equipment. ----------------------------------------------------------- ---------------------------------------------------------- Perfect for all microphone use and great for connecting balanced XLR Male - 1/4" T/S* 20FLX2007-NTS output of some audio processors, mixers, and low density patch bays to XLR inputs. Perfect for all microphone use and great for output of connectored ----------------------------------------------------------- ---------------------------------------------------------- patch bays and some mixers to input of newer pro equipment. XLR Female - 1/4" T/R/S* 20FLX2002-NTS ----------------------------------------------------------- ---------------------------------------------------------- XLR Female - RCA 20FLX2008-NTS Perfect for all microphone use and great for connecting balanced output of some audio processors, mixers, and low density patch Perfect for all microphone use and great for connecting output of bays to XLR inputs. mics or pro equipment and mixers, to unbalanced inputs. ----------------------------------------------------------- ---------------------------------------------------------- XLR Male - Mini T/R/S* 20FLX2003-NTS XLR Female - Mini T/S* 20FLX2009-NTS Perfect for all microphone use and great for connecting balanced Perfect for all microphone use and great for connecting output of output of equipment to balanced inputs of some mixers, audio mics, pro equipment and mixers to mic or line inputs of older processors that have mini TRS connectorization. equipment. ----------------------------------------------------------- ---------------------------------------------------------- ----------------------------------------------------------- ---------------------------------------------------------- XLR Female - Mini T/R/S* 20FLX2004-NTS XLR Female - 1/4" T/S* 20FLX2010-NTS Perfect for all microphone use and great for connecting balanced Perfect for all microphone use and great for connecting output of CABC0705-9 output of equipment to balanced inputs of some mixers, audio mics, pro equipment and mixers to mic or line inputs of older processors that have mini TRS connectorization. equipment. ----------------------------------------------------------- ---------------------------------------------------------- ----------------------------------------------------------- ---------------------------------------------------------- XLR Male - RCA 20FLX2005-NTS 1/4" T/R/S - 1/4" T/R/S* 20FLX2011-NTS Perfect for all microphone use and great for connecting output of Perfect to interconnect balanced outputs and inputs of some industrial and older pro equipment to XLR inputs of newer pro mixers and audio processors or equipment. (These can also be used equipment and mixers. in patchbays, but for that we recommend our lower profile FLEXYGY™ Longframe series, 20FLX2017B or R, see pg 11.) We can customize to any length. Please call! *T/R/S - Tip/Ring/Sleeve (balanced stereo) T/S - Tip/Sleeve (unbalanced mono) National Order Line: 24 Hour Fax Orderline: West Coast Sales & Service: have@haveinc.com800-999-HAVE (4283) 518-828-2008 661-266-1624 store.haveinc.com
  • 9. 10 Audio Interconnect Cable Assemblies Interconnect/Instrument Cables Instrument/Interconnect Cables NEW! Ultra flexible 2-cond uctor cable! Lead and Cadmium fre e! Your choice of cable - "HAVE" Star Quad , the best 2-conductor, sound from or Music Coax! your instruments and equipment! Our professional interconnect/instrument unbalanced cables are made Made with new Flexygy ultra flexible high performance 2-conductor cable with your choice of flexible Canare L4E6S Star Quad, L2T2S 2-conductor, and Canare & Neutrik connectors. or 18AWG GS-6 coaxial music cable. Canare & Neutrik connectors. • 24 AWG, 41 strand Tinned copper conductors for max • Recommended by music shops for Korg, Yamaha, Kawai, Ensoniq, flexibility and reduced handling noise. Fender, Gibson • Special compound PVC outer jacket resists cracking even in • Available in standard 2, 6, 10, 25, and 50 lengths. Cables made sub-zero applications. with L4E6S or L2T2S also available in 15 standard lengths • Conductor DC resistance of 14.3 ohms/1000ft. • Star Quad versions available in all 10 Canare colors* • Hand assembly with true silver solder • 2-conductor L2T2S versions available in black only • Cadmium & Lead free! • GS-6 versions available in black, blue, & red • Available in standard 2, 6, 10, 15’, 25, and 50 lengths. • Exclusive NIGHTSHADE color (bordering on stage black) Patch Cable: RCA Male - RCA Male 207000 20L2015 1/4" T/S - 1/4" T/S 20FLX2012-NTS 20R603 Connect equipment with unbalanced RCA input/output. 20-7000 made Great for guitars, basses, and keyboards or other instruments with with L4E6S. 20L2015 made with L2T2S. 20R603 made with GS-6. unbalanced TS input/output, to amps, mixers, effects pedals and ----------------------------------------------------------- ---------------------------------------------------------- outboard signal processing gear. Use to interconnect some mixers, Keyboard Cable: Phone Male - 207100 audio processors, or connectored patch bays to recording equip- ment. Phone Male 20L2012 ----------------------------------------------------------- ---------------------------------------------------------- 20P603 1/4" T/S - 1/4" T/S Right Angle 20FLX2013-NTS Use to interconnect some mixers, audio processors, or connectored patch bays to recording equipment. 207100 made with L4E6S. 20L2012 made with L2T2S. 20P603 made with GS-6. Use to interconnect some mixers, audio processors, or connectored ----------------------------------------------------------- ---------------------------------------------------------- patch bays to recording equipment. With it’s handy Right Angle TS connector, also great for guitars, basses, and keyboards or other Interconnect Cable: RCA Male -Phone Male instruments with unbalanced TS input/output to amps, mixers, 207200 effects pedals and outboard signal processing gear. 20L2014 ----------------------------------------------------------- ---------------------------------------------------------- 20RP03 RCA - 1/4" T/S 20FLX2014-NTS Use to interconnect some mixers, audio processors, or connectored patch bays. 207200 made with L4E6S. 20L2014 made with L2T2S. Use to interconnect some mixers, audio processors, or connectored 20RP03 made with GS-6. patch bays. Also used for other equipment with unbalanced TS ----------------------------------------------------------- ---------------------------------------------------------- input/output to RCA input/output. Guitar Cable: Phone Male - 207300 ----------------------------------------------------------- ---------------------------------------------------------- Right Angle Phone Male 20L2013 RCA - RCA 20FLX2015-NTS 20G603 Use to connect guitars, basses, and keyboards to amps, mixers, effects Perfect to interconnect unbalanced RCA outputs like tape recorders, pedals, and outboard signal processing gear. Also available with NP2 RCS VCR’s and amplifiers. Also great for connecting recording equipment slim compact design plugs. Available in black, blue, red, and yellow. to distribution amplifiers. *Black, red and blue are stocked colors. Brown, gray, green, orange, purple, white & yellow may require a longer turnaround time. We can customize to any length. Please call! National Order Line: 24 Hour Fax Orderline: West Coast Sales & Service: have@haveinc.com 800-999-HAVE (4283) 518-828-2008 661-266-1624 store.haveinc.com
  • 10. Audio Patch Cable Assemblies 11 Audio Patch Cables Audio Patch Cables The Pros Choice! Patch Cables 20FLX2016B Great for both digital and analog applications! Made to exacting standards 20FLX2016R using Canare and Neutrik parts, with your choice of Canare Star Quad or 20FLX2017B 2-conductor cable. NEW 20FLX2017R • Use with ADC, Audio Accessories, AVP, Canare, Kings, Neutrik, ReAn, Switchcraft, or any patchbays ! • Available in standard 1, 2, 3, 4 and 5 lengths TT (Bantam) Patch Cables 206001B/R Interface to your panel easily and quickly. Great for use with 20L2016B/R HAVE’s Universal patchbays, and patch bays from Canare, ADC, AVP, Neutrik, Switchcraft and Re-An. 2016 series: Bantam connectors; 2017 series: Long Frame connectors. Lead & Cadmium free! Hand-assembled! The B or R in the part number designates BLACK or RED connector backshell color. Available in standard 1, 2, 3, 4 and 5 lengths. 206001 is made with Canare Star Quad low profile L-4E5C, and 20L2016 is made with Canare L2E5, both available in black only. Black or red shelled Neutrik NP3TTP patch plugs are indicated by final Shop online! letter -B or -R in part ID. ----------------------------------------------------------- ---------------------------------------------------------- store.haveinc.com Longframe (1/4") Patch Cables 206101B/R 20L2017B/R Hand-assembled! Patch Cables Bantam & Longframe Patch Cables NKTT NKTB 206101 is made with Canare Star Quad L-4E6S and is available in all 10 Canare colors.* 20L2017 is made with Canare L2T2S and is available in black only. Black or red shelled Neutrik NP3TB patch plugs are indicated by final letter -B or -R in part ID. Longframe TT Patch Cord Patch Cord Neutriks TT patch cords are made with a flexible yet durable cable See our Full-Size and Mid-Size Patchbay that is manufactured using nickel plated TT plugs (gold plugs are also selection starting on page 59! available). Neutrik was the first worldwide to provide nickel plating as standard to help eliminate problems of corrosion and tarnish build-up. Each TT plug has a hex crimped strain refief to provide the ultimate in stress protection for the solder joints and actual cable. The cords are offered in five colors (red, black, blue, yellow, and Audio Patch Cords green) that are matching between cord and plug sleeve for easy Bantam Patch Cables BC00XM identification. Available in 1, 1.5, 2, 3, and 4 lengths.** The Neutrik professional TB (1/4" long frame) patch cables feature the same craftsmanship and attention to details as their TT cords. CABC0705-9 Standard features include an all metal black or red body with color matched cable, unique Neutrik chuck type strain relief, and nickel plated contacts. Using a flexible long lasting cable you are assured of Neutrik quality with each use. Available in 1, 1.5, 2, 3, and 4 lengths.** Patchcords for use in all balanced audio Bantam patchbays. **Not all lengths or colors are standard stock items Assembled with Canare L-4E5C mini Star Quad cable, and meticulously soldered Nickel and Gold plated TRS Bantam Plugs. Looking for Mogami Patchcords? Visit Available in Black, Blue, Gray, Green, Orange, Red and Yellow. our online store at www.haveinc.com! Each comes with a set of snap in place color id rings. 1, 2, & 3 lengths. *Colors: black, blue, brown, gray, green, orange, purple, red, yellow, & white Not all colors are stock items. Some colors may require longer turnaround time. National Order Line: 24 Hour Fax Orderline: West Coast Sales & Service: have@haveinc.com800-999-HAVE (4283) 518-828-2008 661-266-1624 store.haveinc.com
  • 11. 12 Audio Cable Assemblies Deluxe Y & Insert Cables Economy Audio Cables HAVEFlex Y Adapter cables can be used to send two outputs to a HAVE offers quality audio patch cables that perform great when single input, a single output to two inputs, or as a gender changer budgets are an issue. from one cable to two cables. HAVEFlex insert cables are perfect for connecting outboard gear. • Featuring Canare L-4E5C Star Quad low profile cable and Neutrik Great XLR connectors • Y adapter cables available in standard 6" lengths Value! • Insert cables available in standard 6 and 10 lengths Quality Y Adapter Cables Handy! 20-2112* 2 RCA male to 1 RCA female - 6" 20-2113* 2 RCA female to 1 RCA male - 6" Quality Audio Interconnect Cables 20-2118 Dual RCA male audio cable** - 18" 20-2119 Dual RCA male audio cable** - 3 20-Y01 Y Adapter 20-2121 Dual RCA male audio cable** - 6 2 XLR Females - 1 XLR Male 20-2130 Mini TRS male to Mini TRS female - 6 20-Y02 Y Adapter 2 XLR Males - 1 XLR Female ----------------------------------------------------------- ---------------------------------------------------------- 20-Y03 Y Adapter 2 XLR Males - 1 XLR Male HAVE offers economical low loss audio patch cables as well. A “best 20-Y04 Y Adapter buy” for restricted budgets. 2 XLR Females - 1 XLR Female 20-I01 Insert Cable Best 1 T/R/S 1/4" Phone Male - 2 T/R/S 1/4" Phone Males 20-I02 Insert Cable Buy! 1 T/R/S 1/4" Phone Female - 2 T/R/S 1/4" Phone Males 20-I03 Insert Cable 1 T/S 1/4" Phone Male - 2 T/S 1/4" Phone Males 20-I04 Insert Cable 1 XLR Male - 2 T/S 1/4" Phone Males Economy Y Adapter Cables 20-I05 Insert Cable 20-2012* 2 RCA male to 1 RCA female - 6" 1 XLR Female - 2 T/S 1/4" Phone Males 20-2013* 2 RCA female to 1 RCA male - 6" 20-2013GP 2 RCA female to 1 RCA male – gold plug - 6" 20-2015 2 RCA female to 1 Mini stereo TRS - 6" 20-2016 2 RCA female to 1 - ¼” TS - 6" 20-2017 2 ¼” TS male to 1 ¼” TS female - 6" 20-2018 2 ¼” TS female to 1 ¼” TS male - 6" 20-2028 2 RCA male to 1 Mini Stereo TRS - 6" Midi Cables 20-2060 1 RCA male to 1 Mini TS - 10 HAVE’s DELUXE Midi Cables are made with extremely flexible, low Economy Audio Interconnect Cables capacitance Canare D-403AT midi cable, and Neutrik DIN connectors. 20-2002 RCA male to RCA male - 3 Color: Sepia only. Available lengths: 3’, 6’, 10’, 20’ 20-2003 RCA male to RCA male - 6 Our Economy Midi cables feature flexible, low capacitance cable, with high 20-2004 Mini TS male to Mini TS male - 6 quality 5-pin DIN connectors. Available in Black, White, Blue and Red. 20-2005 Mini TS male to Mini TS female - 6 Available lengths: 3’, 6’, 10’, 20’. 20-2006 Mini TS male to RCA male - 3, 6, & 10 20-2008 ¼” TS male to ¼” TS male - 6 20-2009 ¼” TS male to ¼” TS female - 6 20-2019 Dual RCA male audio cable** - 2 20-2020 Dual RCA male audio cable** - 4 20-2021 Dual RCA male audio cable** - 6 Shop online! Deluxe Midi Cables store.haveinc.com MIDIX-SEP Available in Sepia only, 3, 6, 10, & 20 lengths Economy Midi Cables MIDI Available in Black, White, Blue and Red, 3, 6, 10, & 20 *Low loss cable lengths **Color coded on each end National Order Line: 24 Hour Fax Orderline: West Coast Sales & Service: have@haveinc.com 800-999-HAVE (4283) 518-828-2008 661-266-1624 store.haveinc.com
  • 12. Audio Cable Systems 13 Audio Snake Systems Canare System Components Canare’s Modular Snake Systems, Cable Reel Systems, Connectors and Star Quad Cable have exceeded the design specifications of audio engineers, sound contractors and consultants year after year. Great for touring professionals, sound reinforcement contractors, A/V rental companies, and Remote Trucks. Modular Snake Systems are: • Cost Effective • Customized to your specifications • Can be audio, video or A/V Combo Snake Systems • Sets up and tears down with ease • Mix and Match components to make complete set-ups • Contact our sales department for 12, 24, & 32 ch systems • 2 ch, 4 ch, & DT12 configurations are also available on request Canare Snake Trunks Snake Trunks are made with L-4E3-P Star Quad Cable and terminated at both ends with MIL Spec JAE Cannon multipin male and female connectors, and includes dust cap and chains. Available here in 8 and 16 channel configurations. Please contact our sales department for 12, 24 or 32 channel snake trunks. CAN8C10E3 8 Channel Snake Trunk 10 Meter CAN8C30E3 8 Channel Snake Trunk 30 Meter CAN8C50E3 8 Channel Snake Trunk 50 Meter CAN16C10E3 16 Channel Snake Trunk 10 Meter CAN16C30E3 16 Channel Snake Trunk 30 Meter CAN16C50E3 16 hannel Snake Trunk 50 Meter Canare Fantails Fantails are pre-assembled for easy connection, and numbered for identification. Made with Star Quad L-4E Mic cable wired to JAE Cannon XLR-3’s and multipin bayonet lock connectors. Overall fantail Canare Junction Boxes length is 5’, with each channel sporting a large number collar ring for Typically used at one or both ends of an audio snake, Canare Junction quick identification. Multipin end includes dust cap with chain. Canare Boxes come in lots of XLR configurations. The black anodized chassis is 8 and 16 channel configurations are featured here. We also carry their constructed from thick gauge aluminum making it both STRONG and 12 & 24 channel systems. Visit store.haveinc.com for details! LIGHWEIGHT. All panel mount connectors are secured to the chassis with screws (not pop rivets like some others), making them inter- CAN8S1N2 8 Channel Fantail, 8 XLR Female changeable if necessary. Skid pads and multipin dust caps are included. CAN8S2N1 8 Channel Fantail, 8 XLR Male Available here in 8 and 16 channel single, parallel and feed-through CAN16S1F2 16 Channel Fantail, 16 XLR Female configurations. Please contact our sales department for 12, 24 or 32 CAN16S2F1 16 Channel Fantail, 16 XLR Male channel junction boxes. Canare Cable Reel Snakes Single XLR per channel, Single Multipin Box Cable Reel Systems offer a unique all-in-one design to save time and CAN8B1N2 8 Channel Male Junction Box, 8 XLRF money for Multichannel cable storage and system component CAN8B2N1 8 Channel Female Junction Box, 8 XLRM integration. Assembles with a durable Canare R series Reel, built in CAN16B1F2 16 Channel Male Junction Box, 16 XLRF flange mounted junction box, hardwired Star Quad L-4E3-P Multichan- CAN16B2F1 16 Channel Female Junction Box, 16 XLRM nel cable and multipin female Cannon connector. Allows simple and CABC0705-9 secure mating with standard Canare Snake Trunks, Fantails, Junction Parallel XLR per channel, Single Multipin Box Boxes, or other Cable Reel Snakes. Available here in 8 and 16 channel CAN8J12N2 8 Channel Male Junction Box, 8 XLRF, 8 XLRM configurations. Please contact our sales department for 12 and 24 CAN8J12N1 8 Channel Female Junction Box, 8 XLRF, 8 channel cable reel snakes. XLRM CAN16J12F2 16 Channel Male Junction Box, 16 XLRF, 16 CAN8R30E3 8 Channel Reel Snake, 8 XLR Female, 8 XLR XLRM Male 30 Meters CAN16J12F1 16 Channel Female Junction Box, 16 XLRF, 16 CAN8R50E3 8 Channel Reel Snake, 8 XLR Female, 8 XLR XLRM Male 50 Meters CAN16R30E3 16 Channel Reel Snake, 16 XLR Female, 16 XLR Parallel XLR per channel, Multipin Feed Through Male 30 Meters CAN8J12N12 8 Channel M-F Junction Box, 8 XLRF, 8 XLRM CAN16R50E3 16 Channel Reel Snake, 16 XLR Female, 16 XLR CAN16J12F12 16 Channel M-F Junction Box, 16 XLRF, 16 XLRM Male 50 Meters National Order Line: 24 Hour Fax Orderline: West Coast Sales & Service: have@haveinc.com800-999-HAVE (4283) 518-828-2008 661-266-1624 store.haveinc.com
  • 13. 14 Audio Cable Systems Audio Snake Systems HAVE System Components HAVE handcrafts an entire line of standard and custom audio snake system components to exceed any need. Great for sound reinforcement contractors, A/V rental companies, remote trucks, touring professionals, audio engineers, and general sound contractors. We build a huge variety of standard fantails, snake trunks, junction boxes, and cable reel snakes, and we can also custom build any component you need to YOUR specifications! You could choose one or more of our STANDARD system compo- nents, then add other custom components that are designed specifically for YOUR application! They’ll work together seamlessly! DOES IT FAST AND EASILY! HAVE Modular Snake Systems Advantages: • Standard OR Customized to your Specifications • Faster Turnaround Time and Quality controlled hand assembly • You can choose Audio, OR Video Combos • HAVE components are Cost Effective and Budget Friendly • Mix and match, and set up or tear down easily and quickly • Available in 2, 4, 8, 12, 16, 24, & 32 ch configurations • DT12 configurations also available on request HAVE Snake Trunks HAVE’s Snake Trunks are precision made with Canare L4E3-P cable and hand terminated at both ends with professional quality MIL Spec multipin connectors that include dust caps and chains. • Available in 8, 12, 16, and 24-channel configurations • Available in 25’, 35’, 50’, 75’, 100’, 150’ lengths HAVE Fantails HAVE’s fantails are precision made with the same great cable as our snake trunks for compatibility and are numbered for easy identification. Connectors are hand soldered Neutrik male or Shop online! female XLR’s, and MIL Spec multipins that match our other audio systems components exactly. Multipin connectors include dust store.haveinc.com cap and chain. • Available in 8, 12, 16, and 24-channel configurations • Overall fantail length is 5’ HAVE Cable Reel Snakes HAVE Junction Boxes HAVE’s Cable Reels Snakes work great alone or in synch with any HAVE Junction Boxes are perfect for use at one or both ends of of the other components in our audio snake system series. any of our systems snakes, or with our Cable Reel Snakes. Boxes HAVE reels all-in-one design saves time and effort in set-up and are black anodized heavy-gauge aluminum for extreme strength tear down, storing the built in snake right on the reel. Hand and durability, yet they are very lightweight. All Neutrik panel assembled with quality Canare Reels, hardwired Canare Starquad mount connectors are hand secured with screws, making them L-4E3-P Multichannel cable with Mil Spec multipin connectors, interchangeable when necessary. Multipin connectors at the and built-in flange mounted junction box, you can easily and ends include dust caps with chains. securely mate with any of our Snake Trunks, Fantails, or Junction • Available in 8, 12 and 16 channel SINGLE XLR per channel Boxes. configurations. (all Male XLR, or all Female XLR) • All configurations available in 75’, 100’ and 150’ snake • Available in 8, 12, 16, 24 and 32 channel PARALLEL XLR lengths configurations. (ie. 8 Female and 8 Male XLR in the 8- • Snake terminates with Female Multipin channel box) • Available in 8, 12, 16 and 24 channel XLR configurations (32 • Parallel XLR per channel configurations with Feed-through channel as special order) Multipins are also available as special order. Please contact our sales department National Order Line: 24 Hour Fax Orderline: West Coast Sales & Service: have@haveinc.com 800-999-HAVE (4283) 518-828-2008 661-266-1624 store.haveinc.com
  • 14. s Guild Custom Cable Shop 15 Need ANY type of custom cable? We’ll custom manufacture any cable assembly to your specs, or our experienced cable engineers will help you design whatever you need. Don’t just settle for something that “will work”, get the exact cable you need! Our in-house guild shop is equipped with state-of-the-art equipment and tooling, and MOST IMPORTANTLY, the best trained cable technicians in the industry! We’ve been manufacturing assemblies for over 20 years. Serving our customers with accuracy, fast turnaround, and QUALITY! Our custom cable capabilities are only limited by your imagination! • Audio/Video Snakes • Custom Stage Boxes • Multichannel Assemblies • Custom Fan Lengths • Custom patch boxes and panels • Unusual configurations • Custom Avid or Console Harnesses • Custom Snakes with Reels • Custom Loaded Wall plates • Any standard cable can be made in custom lengths or pin-outs! Use our Custom Cable Fast-Fax Quote page to fax us your needs, and we’ll Fast-Fax you back a price quote and delivery schedule! CABC0705-9 National Order Line: 24 Hour Fax Orderline: West Coast Sales & Service: have@haveinc.com800-999-HAVE (4283) 518-828-2008 661-266-1624 store.haveinc.com
  • 15. 16 VGA/VGA Breakout Cable Assemblies VGA Cables Our handcrafted VGA assembly series encompass any VGA application. Whether your need is flexibility or long run length, we have your VGA! So you can rest assured that HAVEs VGAs will perform! Our Supreme Series are painstakingly handcrafted with brawny double-shielded Canare V5-3CFB cable. You won’t FIND a better performing VGA than these, period. Building these babies is very time intensive and difficult; they also need to be handled with care. But if you want the biggest and best VGA cable made, youll find it WELL worth the effort. YOU’LL SEE THE DIFFERENCE careful hand assembly makes! • >91% TAC braid/100% foil shields • Conductor DCR <17.1Ω/1000 • Shield DCR <4.3Ω/1000 • Capacitance: 17 pf/ft Our High Performance Series VGAs are made with Canare V5-1.5C Micro Coax for EXTREME flexibility, and are perfect for shorter runs up to 75’. • >94% dense braid shield • Conductor DCR <10.1Ω/1000 • Capacitance: 21 pf/ft Supreme VGA Cables Our Supreme VGA series cables are made with Canare V5-3CFB Digital Mini Coax Cable for short OR long runs. Double-shielded inner channels High Performance VGA Cables make this series excellent for longer run HDTV, PC to Display or other Our performance VGA Series cables are handcrafted with Canare very demanding applications. Its the brawniest VGA made! V5-1.5C Micro Coax for shorter run HDTV, PC to display (Plasma, • Available in Black only projector etc.), but still excellent up to the longest length we offer • Standard lengths of 5, 10, 15, 20, 25, 30, 40, 50, 75, 100, in this series! 125, and 150 • Available in Black only • Standard lengths of 5, 10, 15, 20, 25, 30, 40, 50, and 75 30VGA53CFB-15FF 15 pin female to 15 pin female 30VGA53CFB-15MF 15 pin male to 15 pin female 30VGA515C-15FF 15 pin female to 15 pin female 30VGA53CFB-15MM 15 pin male to 15 pin male 30VGA515C-15MF 15 pin male to 15 pin female ----------------------------------------------------------- ---------------------------------------------------------- 30VGA515C-15MM 15 pin male to 15 pin male Supreme VGA Breakout Cables ----------------------------------------------------------- ---------------------------------------------------------- Breakout versions of our Supreme VGA Series that are perfect for High Performance VGA Breakout Cables VGA to 5 output connectors, like high-end projectors. Breakout versions of our Performance VGA Series that are perfect • Available in Black only for VGA to 5 output connectors, like high-end projectors. • Standard lengths of 5, 10, 15, 20, 25, 30, 40, 50, 75, 100, • Available in Black only 125, and 150 • Standard lengths of 5, 10, 15, 20, 25, 30, 40, 50, and 75 30VGA53CFB-15FB 15 pin female to 5 BNC Breakout 30VGA515C-15FB 5 pin female to 5 BNC Breakout 30VGA53CFB-15FR 15 pin female to 5 RCA Breakout 30VGA515C-15FR 15 pin female to 5 RCA Breakout 30VGA53CFB-15MB 15 pin male to 5 BNC Breakout 30VGA515C-15MB 15 pin male to 5 BNC Breakout 30VGA53CFB-15MR 15 pin male to 5 RCA Breakout 30VGA515C-15MR 15 pin male to 5 RCA Breakout High Performance VGA Adapter 30VGA515C-ADAPT1-0015 Our PROFlex™ Performance VGA Adapter cable is designed to enable a longer run 5 channel BNC cable to be used to carry a VGA signal to 5 output signal component BNC’s. Just connect this adapter cable to your VGA output source, connect your 5 channel RGB(HV) cable and away you go! • Available in 18" lengths only National Order Line: 24 Hour Fax Orderline: West Coast Sales & Service: have@haveinc.com 800-999-HAVE (4283) 518-828-2008 661-266-1624 store.haveinc.com
  • 16. 17 CABC0705-9 Also available with Kings Triax connectors - Please call or e-mail for information! Dont forget to check out Shop online! our selection of Cable store.haveinc.com Reels, starting on page 62! National Order Line: 24 Hour Fax Orderline: West Coast Sales & Service: have@haveinc.com800-999-HAVE (4283) 518-828-2008 661-266-1624 store.haveinc.com
  • 17. 18 Multichannel Video Cable Assemblies Analog Multichannel Video Cables When you want only the best RGB Cables, choose HAVE manufactured quality! • Canare V series cable • Canare impedance matched connectors • Your choice of 3 or 5 channel configurations (4 channel configurations available as a special order item) • Made with BNC or RCA connectors, or combinations of both • Custom lengths available to your specifications Broadcast 5C Series - Double Shielded for Long Runs! • >94% braid shield coverage • Conductor DCR <15.5Ω/1000 • Shield DCR <3.7Ω/1000 • Capacitance: 21 pf/ft • Outside Diameters: 3ch-.611"; 4ch-.674"; 5ch-.756" Standard 3C Series - RG59 Flexible Performance! • >97% braid shield coverage • Conductor DCR <32.1Ω/1000 • Shield DCR <3.7Ω/1000 • Capacitance: 21 pf/ft • Outside Diameters: 3ch-.453"; 4ch-.512"; 5ch-.559" Shop online! store.haveinc.com Learn more about Canares VC Series on page 33! Broadcast 5C RGB Multichannel Video Our flexible PROFlex™ Broadcast RGB Video fantails are handcrafted with Canare V3 and V5-5C cable and Canare Connectors. Great double-shielded RG59 Type performance for Standard 3C RGB Multichannel Video extra long cable runs over wide bandwidth RGB component Our lightweight super flexible PROFlex™ Standard RGB Video analog systems. With incredible color accuracy and thoroughly fantails are handcrafted with Canare V3 and V5-3C cable and clear picture detail, these cables are also highly recommended Canare Connectors. Great RG59 performance for short or long for field operations where cable strength and durability are a runs or where conduit size is limited. Incredible color accuracy and must. Great for video projection, video walls or CG thoroughly clear picture detail for RGB broadcast video systems, workstations. component analog video, video projection or computer graphics. • Available in Black jacket • Available in Black jacket • Standard lengths of 5, 10, 15, 20, 25, 30, 40, 50, 75, 100, • Standard lengths of 5, 10, 15, 20, 25, 30, 40, 50, 75, 100, 125, 150, 200, and 300 125, 150, 200, and 300 3 Channel 3 Channel 303VS5C-BB 3 Channel BNC to BNC 303VS3C-BB 3 Channel RGB BNC to BNC 303VS5C-BR 3 Channel BNC to RCA 303VS3C-BR 3 Channel RGB BNC to RCA 303VS5C-RR 3 Channel RCA to RCA 303VS3C-RR 3 Channel RGB RCA to RCA 5 Channel 5 Channel 305VS5C-BB 5 Channel BNC to BNC 305VS3C-BB 5 Channel RGB(HV) BNC to BNC 305VS5C-BR 5 Channel BNC to RCA 305VS3C-BR 5 Channel RGB(HV) BNC to RCA 305VS5C-RR 5 Channel RCA to RCA 305VS3C-RR 5 Channel RGB(HV) RCA to RCA National Order Line: 24 Hour Fax Orderline: West Coast Sales & Service: have@haveinc.com 800-999-HAVE (4283) 518-828-2008 661-266-1624 store.haveinc.com
  • 18. Digital Multichannel Video Cable Assemblies 19 Digital RGB Multichannel Video Our acclaimed Digital Video Fantails are all handcrafted in our own ielded! Double Sh Guild Cable Shop. • Canare V3, V4, & V5 channel CFB series coax cable • Impedance matching Canare connectors • Perfect for: - Serial Digital Video - HDTV upgrades - Hi-Res Video Projection - Broadband facilities - Component Analog Systems • Available in overall Black jacket • Standard lengths of 5, 10, 15, 20, 25, 30, 40, 50, 75, 100, 125, 150, 200, and 300 • Custom lengths available to your specifications Mini Coax Series • >91% TAC braid/100% foil shields • Conductor DCR <17.1Ω/1000 • Shield DCR <4.3Ω/1000 • Capacitance: 17 pf/ft RG59 Series • >93% TAC braid/100% foil shields • Conductor DCR <11.3Ω/1000 • Shield DCR <3.0Ω/1000 • Capacitance: 17 pf/ft RG6 Series Digital RGB Video - RG59 Made with Canare V-4CFB RG59 type low loss Coax cable and • >93% TAC braid/100% foil shields Canare BNC or RCA connectors. Solid conductor 20 AWG inner • Conductor DCR <7.1Ω/1000 channels, double shielding for low loss, and all hand assembled. • Shield DCR <2.1Ω/1000 • Capacitance: 17 pf/ft 3 Channel 303VS4CFB-BB 3 Channel RG59 Coax BNC to BNC Digital RGB Video - Mini Coax 303VS4CFB-BR 3 Channel RG59 Coax BNC to RCA Made with Canare V-3CFB Mini Coax cable and Canare BNC or RCA 303VS4CFB-RR 3 Channel RG59 Coax RCA to RCA connectors. Totally flexible, with 24 AWG solid conductor inner 4 Channel channels, with double shielding resulting in very low capacitance. 304VS4CFB-BB 4 Channel RG59 Coax BNC to BNC 304VS4CFB-BR 4 Channel RG59 Coax BNC to RCA 3 Channel 304VS4CFB-RR 4 Channel RG59 Coax RCA to RCA 303VS3CFB-BB 3 Channel Mini Coax BNC to BNC 5 Channel 303VS3CFB-BR 3 Channel Mini Coax BNC to RCA 305VS4CFB-BB 5 Channel RG59 Coax BNC to BNC 303VS3CFB-RR 3 Channel Mini Coax RCA to RCA 305VS4CFB-BR 5 Channel RG59 Coax BNC to RCA 4 Channel 305VS4CFB-RR 5 Channel RG59 Coax RCA to RCA 304VS3CFB-BB 4 Channel Mini Coax BNC to BNC ----------------------------------------------------------- ---------------------------------------------------------- 304VS3CFB-BR 4 Channel Mini Coax BNC to RCA Digital RGB Video - RG6 304VS3CFB-RR 4 Channel Mini Coax RCA to RCA Made with Canare V-5CFB RG6 Coax cable and Canare BNC or RCA 5 Channel connectors. Brawny 18 AWG solid conductor inner channels, double 305VS3CFB-BB 5 Channel Mini Coax BNC to BNC shielded, hand assembled, and great for long SDI and HD runs. CABC0705-9 305VS3CFB-BR 5 Channel Mini Coax BNC to RCA 305VS3CFB-RR 5 Channel Mini Coax RCA to RCA 3 Channel 303VS5CFB-BB 3 Channel RG6 Coax BNC to BNC 303VS5CFB-BR 3 Channel RG6 Coax BNC to RCA Today’s Serial Digital equipment installations require longer 303VS5CFB-RR 3 Channel RG6 Coax RCA to RCA tie lines and multiple I/O’s, and need serial digital cables 4 Channel designed with matching impedance connectors to maximize 304VS5CFB-BB 4 Channel RG6 Coax BNC to BNC 304VS5CFB-BR 4 Channel RG6 Coax BNC to RCA overall electrical length and achieve optimal results. These 304VS5CFB-RR 4 Channel RG6 Coax RCA to RCA premium cables are designed for serial digital transmission 5 Channel in lengths up to 940 ft. (for the RG6 Series). 305VS5CFB-BB 5 Channel RG6 Coax BNC to BNC 305VS5CFB-BR 5 Channel RG6 Coax BNC to RCA 305VS5CFB-RR 5 Channel RG6 Coax RCA to RCA National Order Line: 24 Hour Fax Orderline: West Coast Sales & Service: have@haveinc.com800-999-HAVE (4283) 518-828-2008 661-266-1624 store.haveinc.com
  • 19. 20 Video Cable Assemblies PROFlex™ Video Cables: handcrafted in our own Guild Cable Shop for over 20 years, with strict attention to detail and performance, and rigorously tested before we allow them out the door. PROFlex Cables are manufactured with the best component names you know like Canare, Belden, Gepco, Mogami, and others. Take a look at the huge variety of video assembly configurations we make as standard cables, in a variety of lengths and colors. We are so confident in the quality of our assemblies that all come with our PROFlex™ Limited Lifetime Warranty. Dont see what you want here? Give us a call or use the Custom Cable Assembly Quote Request form in this catalog or online at www.haveinc.com! Single Channel Video Cables Perfect for Word Standard Broadcast Video Our super flexible PROFlex™ Standard Broadcast Video cables are Clock use! handcrafted with Canare LV61S RG59 cable with matching imped- ance true 75-ohm Canare connectors. Perfect for all video facility equipment interfacing and video patch cord assemblies. • Available in all 10 Canare Colors* PROFlex - When you care about the Very Best! • Standard lengths of 5, 10, 15, 25, and 50 We can customize to any length - please call! Serial Digital Broadcast Video Our flexible PROFlex™ Serial Digital Mini Coax single channel cables are handcrafted with Canare L-3CFB, L-4CFB & L-5CFB cable & Canare 75-ohm Connectors. Select your RG type for length and application. Fantastic color 301001 BNC to BNC accuracy and thoroughly clear picture detail for broadcast high-definition 301010 RCA to RCA video systems, video projection or computer graphics, ENG/EFP, video 301018 BNC to RCA patch cords & inter-rack wiring. Great for Digital or Analog applications. 30FF005 F plug to F plug (not available in 15’ & 50’) ----------------------------------------------------------- ---------------------------------------------------------- • Available in Black, Blue, Green, & Red. L-4CFB & L-5CFB also Precision Broadcast Video available in Purple & Yellow as special order Our amazingly flexible PROFlex™ Precision Broadcast Video Assemblies • Standard lengths of 2’, 3, 5, 10, 15, 25, 35’, 50, 75, 100, 200, are handcrafted with Canare LV77S cable with matching impedance 300, 400, and 500 true 75-ohm Canare connectors. Typically used for longer cable runs between equipment than our Standard Broadcast cables, these cables offer great return loss characteristics and excellent signal isolation. • Available in all 10 Canare Colors* • Standard lengths of 3’, 6, 10, 15, 25, 50, 75, and 100 301L3CFB-BB L-3CFB Mini Coax BNC to BNC 301L3CFB-BR L-3CFB Mini Coax BNC to RCA 301L3CFB-RR L-3CFB Mini Coax RCA to RCA 301L4CFB-BB L-4CFB RG59 Coax BNC to BNC 301L4CFB-BR L-4CFB RG59 Coax BNC to RCA 304001 BNC to BNC 301L4CFB-RR L-4CFB RG59 Coax RCA to RCA 304010 RCA to RCA 301L5CFB-BB L-5CFB RG6 Coax BNC to BNC 304018 BNC to RCA 301L5CFB-BR L-5CFB RG6 Coax BNC to RCA 30FF005 F plug to F plug (not available in 3’, 6’, 15’ & 75’) 301L5CFB-RR L-5CFB RG6 Coax RCA to RCA *Canare Colors - Black, Blue, Borwn, Gray, Green, Orange, Purple, Red, White, Yellow Not all colors are stock items. Some colors may require longer turnaround time. National Order Line: 24 Hour Fax Orderline: West Coast Sales & Service: have@haveinc.com 800-999-HAVE (4283) 518-828-2008 661-266-1624 store.haveinc.com
  • 20. S-Video Cable Assemblies, Bulk Cable & Connectors 21 S-Video Cables S-Video Connectors S-Video Cables 4-Pin Connectors/Adapters Our Deluxe S-Video cables are handcrafted with Belden Dual Coaxial Y/C cable and Premium 4-pin S-Video connectors. Excellent low loss connection for Y/C transmission over both short and long HAVE offe rs th runs, offering outstanding color, contrast, black levels and picture S-Video C e best details. onnectors! • Available in Black only • Standard lengths of 3, 6, 10, 12, 20, 25, 30, 50, 75, 100, and 150 SVMD4CAHD Solder 4 pin deluxe S-Video plug 307106DX 4 pin to 4 pin S4P Solder 4 pin male S-Video connector S-Video Breakout Cables S-Video Breakout Cables Our Deluxe S-Video breakout adapter cables are handcrafted with Belden Dual Coaxial Y/C cable, Premium 4-pin S-Video and Canare BNC connectors. Used together, these adapter cables offer an S4J Solder 4 pin female S-Video connector excellent low loss connection for Y/C signal to travel longer distances over 2 BNC cables between adapters. Use this Y/C to 2 Female BNC at source end of transmission, connect 2 (any length) BNC Male to Female coaxial video cables, then terminate with our 2 Male BNC to Y/C. Offers outstanding color, contrast, black levels and picture details. • Available in 12" lengths only TCS415 Female to female S-Video in-line adapter S4JJP Female to female S-Video panel mount adapter 30S417H 4 pin to 2 BNC female 30S418H 4 pin to 2 BNC male Belden Bulk S-Video Cables Mogami Bulk S-Video Cable 1807A & 1808A S-Video Cables Parallel S-Video Cable These great Belden S-VIDEO cables are VERY flexible. 1807A is a MOGAMI 2947 parallel coaxial cable was developed to satisfy a contra- dual coax cable in a parallel zip construction that provides easy dicted requirement of strict 75W low-loss performance in a small package CABC0705-9 quick termination, while 1808A is in a round jacket for better which fits S-video mini-din connectors for separate Y/C signals. Available aesthetics, and is more rugged. in 500’ and 1000’ roll sizes. 1807A High Flex S-Video Cable – Dual Parallel Zip Type MOG2947 1808A Brilliance S-Video Cable – Round Jacket National Order Line: 24 Hour Fax Orderline: West Coast Sales & Service: have@haveinc.com800-999-HAVE (4283) 518-828-2008 661-266-1624 store.haveinc.com
  • 21. 22 Video Patch Cable Assemblies Mid-Size Patch Cords Mid-Sized Patchcord Canare’s 75-ohm Mid-Size Video Patch Cords are made specifically Our deluxe PROFlex handcrafted Mid-Size Video Patch cables are perfect for use with their mid-size video patchbays. Like their standard size for your most critical applications. Made with 95% shielded Canare LV- brothers, they’re made with super flexible LV-61S cable, and 61S RG59 75-ohm Coax Cable and Canares new Mid-Size Video Patch assembled with Canare’s MVP-C4 mid-size video patch plugs or Plugs. Interface your mid-size patchbays easily and quickly. Great for combined with Canare BCPC4B BNC connector. use with high density mid-size patch bays from AVP, Canare and • Mid-size patch to mid-size patch available in 1’, 2’, and 3’ lengths Switchcraft. See our selection of patchbays on pg. 59. • Mid-size patch to BNC Male available in 6’ and 15’ lengths • Available in all 10 Canare colors* with color matched Canare • Both types available in black, blue, green, red and yellow stress relief boots. • Standard lengths of 1, 1.5, 2, and 3 NEW ! CANMVPC00*F Patch to Patch CANMVPC00*F-BP Patch to BNC Male Shop online! 309501 Mid-Size Patchplug to Mid-Size Patchplug store.haveinc.com Patch Cables 75Ω Video Patch Cords Our handcrafted Video Patch cables are perfect for your most critical applications. Made with Canare LV-61S RG59 75-ohm Coax Cable and Canare (WE .090) 75Ω Patch Cords are the perfect compliment to Canare Patch Plugs. Interface to your patchbays easily and quickly. Great their 75Ω Digital Video Jacks because they are impedance for use with video patch bays from ADC, AVP, Canare and Switchcraft. matched for 1.5GHz performance. Super flexible LV-61S cables See our selection of patchbays on pg. 59. are precisely cut to length and available in all 10 Canare colors* for component analog video systems. To ensure reliability and • Available in all 10 Canare colors* with color matched Canare long life, all cords come assembled with VWP-C4A video plugs stress relief boots. and color-matched CB04 silicon rubber stress relief boots. • Standard lengths of 1, 1.5, 2, 3, 4, 5, 6, 12, and 25 VPC00# patch cords available in 2’, 3’ & 6’ lengths VPC00# 309101 Patchplug to Patchplug *Colors: black, blue, brown, gray, green, orange, purple, red, yellow, & white. 309201 Patchplug to BNC Not all colors are stock items. Some colors may require longer turnaround time. Economy Video Patch Cables HAVE offers quality economy video patch cables for standard applications when your budget or requirements call for economy with quality assurance. • High Quality 75-ohm Coaxial Cable • Shielded Low Loss RG59 • Molded Black Construction Quality Video Patch Cables Economy Video Patch Cables 302101 BNC Male to BNC Male, available in 3’, 6’, 12’, & 25’ lengths 302002 BNC Male to BNC Male, available in 3’, 6’, 12’, & 25’ lengths 302107 RCA Male to RCA Male, available in 6 & 12’ lengths 302007 RCA Male to RCA Male, available in 6’ & 12’ lengths 302113 F Male to F Male, available in 12’ lengths 302013 F Male to F Male, available in 3’, 6’, 12’, & 25’ lengths 302118 BNC Male to RCA Male, available in 6’ & 12’ lengths 302018 BNC Male to RCA Male, available in 6 & 12’ lengths National Order Line: 24 Hour Fax Orderline: West Coast Sales & Service: have@haveinc.com 800-999-HAVE (4283) 518-828-2008 661-266-1624 store.haveinc.com
  • 22. Data Cable Assemblies 23 DVI Data Cables Gefen HDMI Data Cables DVI – Digital Video Interface cables from HAVE provides loss-less Gefen’s High-Definition Multimedia Interface™ HDMI Cables use digital video transmission between PC’s, HDTV Set Tops, DVD a much smaller, user-friendly connector than the DVI connector. players, LCD and Plasma displays, and digital video projectors. The specification handles high-bandwidth, uncompressed video Top quality molded construction, with quality shielded cable and and multi-channel digital audio as well, all in one cable, plus superior long life connectors. standard, enhanced, or high-definition video. HDMI provides an interface between any audio/video source, such as a set-top box, DVI has the ability to employ two links, with each link comprised DVD player, A/V receiver and an audio/video monitor such as a of three data channels for RGB. Each link has a maximum DTV. It transmits all ATSC HDTV standards and supports 8- bandwidth of 165 MHz, therefore Dual link has a maximum channel digital audio, with bandwidth to spare to accommodate bandwidth of 330 MHz. Dual link supports resolutions up to future enhancements and requirements. 2048 x 1536. • Superior, uncompressed digital video and audio quality • All available in 2, 3, & 5 meter lengths • Simple, user-friendly connector that replaces the maze of cabling behind the entertainment center • A new popular interface enabling the transmission of high- definition content • Available in 6’, 10’, 15’ 30’, and 50’ lengths DVD-D Cables with a -D suffix denote DIGITAL ONLY. Available in both single and dual link configurations. DVI-D IS THE BEST QUALITY SIGNAL! GEFCABHDMI HDMI Male to HDMI Male HAV26911 DVI-D Dual Link Male to Male HAV26950 DVI-D Dual Link Male to Female DVD-I Gefen HDMI Mate Adapter Cables with an -I suffix denote an integrated interface containing Gefen’s HDMI Mate provides a simple, economical way to change any the digital and analog signals. With one cable, you can transmit HDMI male connector to an HDMI female connector. Makes any Male- digital to digital or analog to analog (It will NOT turn your analog to-Male HDMI cable an extension cable (50’ maximum for HDMI). Buy signal into a digital signal). Available in both single and dual link. 2 and use 3 Gefen 15’ HDMI cables (above) to extend HDMI 45’ (longer DVI-I is CURRENTLY THE MOST POPULAR configuration, with cable lengths require amplification). many video cards offering DVI-I interface. HAV26948 DVI-I Dual Link Male to Male HAV26946 DVI-I Single Link Male to Male Shop online! GEFADAHDMIFF HDMI Adapter/Extender store.haveinc.com Gefen HDMI to DVI Cables Gefen’s HDMI to DVI cables connect HDMI and DVI interfaces to each other. HDMI and DVI’s superior digital high-definition video signals give viewers the best picture of any available format. And since HDMI is backwards compatible with DVI, you can connect Gefen DVI to VGA Adapter HDMI-capable components and displays to equipment with DVI CABC0705-9 Gefen’s DVI to VGA adapter connects the analog pins from any connections, without having to worry about compatibility. DVI-I connector to VGA Analog displays. Available in 6’, 10’ and 15’ lengths. GEFADA-DVI-2-VGA DVII to VGA Adapter GEFCABDVI2HDMI HDMI to DVID cable National Order Line: 24 Hour Fax Orderline: West Coast Sales & Service: have@haveinc.com800-999-HAVE (4283) 518-828-2008 661-266-1624 store.haveinc.com
  • 23. 24 Gefen Cables & Adapters Gefen HDTV Extender Gefen Optical DVI Extension Gefen’s HDTV Extender revolutionizes DVI/HDMI extension by HDCP/HDMI compliant. Gefen’s ex•tend•it DVI1000HDR extends using inexpensive CAT-5E cables instead of more expensive fiber any DVI or HDTV display up to 1640’ from your HDTV or DVI optic cables or bulky DVI connectors on copper cables. Now you source using 2 fiber optic cables, and 1 CAT-5E cable, between can play your HDTV source or display device up to 150 feet away the DVI1000HDR send and receive units. with no loss in quality and all the conveniences and economy of Features include: CAT-5 cables. Package includes: • Extends any DVI compliant device up to 1640’ (500 meters) • HDTV Extender SEND unit (sits next to your source) from the source (computer, set-top box, or DVD player) • HDTV Extender RECEIVE unit (sits next to your display) • Supports 480P, 720P, 1080I, 1080P, and 1920 x 1200 resolutions • Your choice of HDMI to DVI or HDMI to HDMI cables (to run • Supports DDWG standard for DVI compliant monitors between the source and the send unit, and the receive unit and Package includes: the display) • DVI1000HDR SEND unit (sits next to your source) • One 5VDC Power Supply • DVI1000HDR RECEIVE unit (sits next to your display) All you have to add is 2 equal length CAT-5E cables up to 150’. • One 6’ DVI cable (m-m) to run between the source and send unit • One 12v power supply All you have to add are 2 equal length dual mode LC fiber optic NEW! cables and 1 CAT-5E cable of the same length, to run between the send and receive units. Attention: Contractors and insta llers GEFEXTHDTVCAT5-HDMI/DVI HDMI to DVI connection GEFEXTHDTVCAT5-HDMI/HDMI HDMI to HDMI connection GEFEXTDVI1000HD Send & receive units and power supply ...Or buy the Ready-Made DVI1000HDR Extender Kits Features include: • DVI1000HD Package • Both dual mode LC fiber optic cables • Required CAT-5E cable GEFEXTDVI1000HD60B 60’ Extension Kit with Cables GEFEXTDVI1000HD100B 100’ Extension Kit with Cables GEFEXTDVI1000HD150B 150’ Extension Kit with Cables GEFEXTDVI1000HD300B 300’ Extension Kit with Cables GEFEXTDVI1000HD600B 600’ Extension Kit with Cables Gefen CAT-5E Cables For use with the Gefen HDTV Extender. HDTV Extender requires 2 CAT-5E cables of equal length between the SEND and RECEIVE Gefen LC Fiber Optic Cables for units. DVI 1000HD Features include: • 4 Strand dual mode fiber optic LC – LC cable for DVI 1000HD GEFCABCAT5-025 CAT-5E cable 25’ GEFCABCAT5-050 CAT-5E cable 50’ We can build these GEFCABCAT5-075 CAT-5E cable 75’ GEFLC030 30’ Fiber Optic cable LC for you! GEFLC060 60’ Fiber Optic cable LC GEFCABCAT5-100 CAT-5E cable 100’ GEFLC100 100’ Fiber Optic cable LC GEFCABCAT5-150 CAT-5E cable 150’ GEFLC150 166’ Fiber Optic cable LC GEFCABCAT5-200 CAT-5E cable 200’ GEFLC200 200’ Fiber Optic cable LC GEFCABCAT5-250 CAT-5E cable 250’ GEFLC300 300’ Fiber Optic cable LC GEFCABCAT5-300 CAT-5E cable 300’ GEFLC600 600’ Fiber Optic cable LC National Order Line: 24 Hour Fax Orderline: West Coast Sales & Service: have@haveinc.com 800-999-HAVE (4283) 518-828-2008 661-266-1624 store.haveinc.com
  • 24. Computer, VGA, & Data Cable Assemblies 25 Computer, VGA, & Data Cables Molded VGA Cables Economical... Yet quality is yours with our molded VGA/ Data cables! HAVHD15MM HD15 male - HD15 male VGA Monitor Cable; Available in 6 & 10 lengths HAVHD15MF HD15 male - HD15 female VGA Monitor Cable; Available in 6 & 10 lengths HAVDB9MM DB9 male - DB9 male RS-422 Monitor Cable; Available in 6, 15, 25, & 50 lengths HAVDB9MF DB9 male - DB9 female RS-422 Monitor Cable; Available in 6, 15, 25, & 50 lengths Molded Hook-Up Cables The HAVE “Secret Ingredient” is in all of our handcrafted cables & systems! Data Cables Use our PROFlex RS-422 Data Cables to route your serial data signals and to connect your edit controller to your editing decks. Meticulously HAVDB9F25M DB9 female - DB25 male RS-422 to RS-232 handcrafted with Belden cable and premium quality DB9 connectors. Cable; Available in 6 & 10 lengths • Available in Gray only • Standard lengths of 10, 25, and 50 HAVDB25MM DB25 male - DB25 male RS-232 Cable; Available in 6 & 10 lengths HAVDB25MF DB25 male - DB25 female RS-232 Cable; 306051 DB9 Male - DB9 Male Available in 6 & 10 lengths; extension cable 306053 DB9 Female - DB9 Male Molded Data Cables CABC0705-9 Other Specialty Cables HAVE manufactures many types of specialty cables using the highest quality components and with our HAVE “Secret Ingredient”, just like our HAVEFlex and PROFlex line! If you have need for any type of Specialty Cable – Please CALL US ! HAVMD6MM Male - male 6 pin mini din PS/2 mouse Cable; • Camera Cables Available in 6 & 10 lengths • Data Cables HAVMD6MF Male - female 6 pin mini din PS/2 mouse Cable; • Dub Cables Available in 6 & 12 lengths; extension cable • Power Cables National Order Line: 24 Hour Fax Orderline: West Coast Sales & Service: have@haveinc.com800-999-HAVE (4283) 518-828-2008 661-266-1624 store.haveinc.com
  • 25. 26 Data Cable Assemblies Firewire Data Cables USB Data Cables IEEE 1394 - A very fast external bus standard that supports data transfer USB (Universal Serial Bus) A-Type to B-Type & A-Type to A-Type Cable rates of up to 400 Mbps (1394a) and 800 Mbps (1394b) Products Assemblies for Desktop & Laptop Computers Utilizing the USB Interface. supporting the 1394 standard go under different names, depending on Use A to B to interface a USB device to a USB host or hub. Use A to A the company. Apple, which originally developed the technology, uses to extend cable length. the trademarked name FireWire. Other companies use other names, • Connectors: USB A Male to USB B Male or USB A Male to USB such as i.link and Lynx, to describe their 1394 products. A single 1394 A Female (to extend existing USB A/B cables) can be used to connect up to 63 external devices. In addition to its high • Provides hi-speed data transfer to 480Mbps speed, 1394 also supports isochronous data -- delivering data at a • Compatible with PC and Mac guaranteed rate. This makes it ideal for devices that need to transfer • Ultra-flexible jacket makes installation easy high levels of data in real time, such as video devices. IEEE 1394 • Heavy-duty molded strain relief for durability and increased Firewire is extremely fast and flexible, and like USB, 1394 supports both flexibility plug-and-play and hot plugging, and provides power to peripheral • USB 2.0 compliant devices. • Quality molded construction for durability • Gold plated contacts • All cables are VW-1 Fire Rated and IEEE 1394 compliant • All available in 2, 3 and 4.5 meter lengths HAVUSBAB USB A male to USB B male - available in 1, 2, 3, 4, and 5 meter lengths HAVUSBAA USB A male to USB A female - available in 1, 2, and 3 meter lengths FW66 Firewire 1394a 6pin to 6pin 400Mbps FW64 Firewire 1394a 6pin to 4pin 400Mbps FW44 Firewire 1394a 4pin to 4pin 400Mbps Shop online! FW99 Firewire 1394a 9pin to 9pin 800Mbps store.haveinc.com FW96 Firewire 1394b 9pin to 6pin 800 devices to 1394a ports (available in 2m & 3m lengths only) FW94 Firewire 1394b 9pin to 4pin 800 devices to 1394a ports (available in 2m & 3m lengths only) National Order Line: 24 Hour Fax Orderline: West Coast Sales & Service: have@haveinc.com 800-999-HAVE (4283) 518-828-2008 661-266-1624 store.haveinc.com
  • 26. Bulk Audio & Video Cable 27 You’ve come to the exciting heart of the matter, bulk cable! Most of what we do in the industry revolves around this most basic yet technical element in the all-important task of getting a signal pristinely from one place to another. Con- nectors are shiny and nice for juggling, but don’t amount to much without great cable to partner with. And since you know we build GREAT cable assemblies, you can bet we only carry GREAT cable! (and LOTS of it) Here in our catalog we’re featuring great professional cable from Canare, Belden, Gepco and Mogami. But remember…. CALL US FOR ANY CABLE NEED FROM INDUSTRY LEADERS LIKE : CABC0705-9 National Order Line: 24 Hour Fax Orderline: West Coast Sales & Service: have@haveinc.com800-999-HAVE (4283) 518-828-2008 661-266-1624 store.haveinc.com
  • 27. 28 Bulk Audio Cable BLACK • BLUE • BROWN • GRAY • GREEN • ORANGE • PURPLE • RED • YELLOW • WHITE Our tests show that Mic/Line Level Cable L2T2 specs are comp L-2T2S, L2E5 - 2 Conductor arable with L4E6S A great general purpose microphone cable that has maximum flexibility and reduced handling noise with high density copper braid. Special For use with micropho nes, PVC jacket resists cracking and tearing. L-2E5 is a miniature version of audio rack wiring, PA L-2T2S when small size and light weight are needed. systems, and audio patch cord s CANL2T2S is available in 656 roll size; black, blue*, gray*, orange*, red*, & yellow*. CANL2E5 is available in 656 roll size; black only. Star Quad Mic/Line Level Cable L4E Series L-2B2AT - 2 Conductor STAR QUAD is named for its 4-conductor style. This design minimizes Canares thinnest audio hookup wire. Extremely flexible, the L- the loop area between twists of conductors reducing susceptibility to 2B2AT series is for point to point wiring in fixed installations. electro-magnetically induced noise. SCR dimmer noise (found on stage), Easy Cable prep and soldering efficiency for quick termination. is reduced to less than 1/10 the level found in good 2-conductor mic Foil shield with drain wire. Excellent frequency response. cables. The pairing of conductors yields a 3 point increase in effective gauge. (e.g. L-4E6S used as a balanced single channel cable is effectively CANL2B2AT is available in 656 and 1640 roll sizes; gray & black*. 21 AWG.) Excellent for longer runs! Star Quad Microphone Cable - Braided Shield For the latest specials, helpful hints, news, (For Portable Applications) information, & shopping visit us online! CANL4E6S is 24 gauge with effective 21 AWG of combined twin conductors - available in 656 and 1000 roll sizes; all 10 colors. www.haveinc.com CANL4E5C is 26 gauge with effective 23 AWG of combined twin conductors - available in 656 roll size; black, blue*, gray*, green*, orange*, red*, white*, & yellow*. Star Quad Line Cable - Foil Shield with Drain Wire (For Permanent Applications) See our HAVEFlex Mic/Line Cables made CANL4E5AT is 25 gauge with effective 22 AWG of combined twin with L-4E6S, L-4E5AT, and L-2T2S perfor- conductors - available in 656 roll size; gray & black*. mance cables on pages 3 - 7! CANL4E6AT is 23 gauge with effective 20 AWG of combined twin conductors - available in 656 roll size; gray & black*. Microphone CableM Model Standard Weight Nominal PVC Jacket Brittle Number Insulation Cond. AWG Pitch Shield Cond. Shield Nominal Nominal Nominal Nominal Group Length Std. Length O.D. Nom. Thick. Point of Type (Qty./mil.) Twist Quad Coverage D.C.R. D.C.R. Cap. Cap. Impedance Atten. Delay Time lbs. in. in. ºF Cond. Thick. Cross. Sec. in. W/100 W/1000 pF/ft pF/ft V/1000 mV/1000 (kg) (mm) (mm) (ºC) mil Area (mm) (W/100m) (W/100m) (pF/m) (pF/m) (V/100m) (V/100m) L-4E6S 656/1000 24/35 .236 .044 -56 2 Blue IPE AC-#24 .79 >95% <29.9 <9.1 46 57 44Ω 0.9 1.80 200m/305m 11/16 6.00 1.12 -49 2 White 15.7 40/3.15 20 TAC Braid <9.8 3.0 150 185 0.3 5.9 L-4E5C 656 18 .189 .032 -56 2 Blue IPE AC-#26 .71 >96% <39.7 <7.6 50 61 40Ω 0.9 1.71 200m 8 4.80 0.80 -49 2 White 11.8 30/3.15 18 TAC Braid <13.0 2.5 162 200 0.3 5.6 L-4E5AT 656 16 .197 .039 -22 2 Blue IPE AC-#25 .83 100% <32.7 _ 50 68 37Ω 0.9 1.71 200m 7 5.00 1.03 -30 2 White 12.6 16/4.73 21 AL Tape <10.7 164 222 0.3 5.6 L-4E6AT 656 23 .244 .047 -22 2 Blue IPE AC-#23 .99 100% <19.4 _ 46 64 37Ω 0.6 1.68 200m 10 6.20 1.20 -30 2 White 15.7 12/7.09 25 AL Tape <6.4 150 210 0.2 5.5 Mic/Line Level CableM Model Standard Weight Nominal PVC Jacket Brittle Number Insulation Cond. AWG Pitch Shield Cond. Shield Nominal Nominal Nominal Nominal Group Length Std. Length O.D. Nom. Thick. Point of Type (Qty./mil.) Twist Quad Coverage D.C.R. D.C.R. Cap. Cap. Impedance Atten. Delay Time lbs. in. in. ºF Cond. Thick. Cross. Sec. in. W/100 W/1000 pF/ft pF/ft V/1000 mV/1000 (kg) (mm) (mm) (ºC) mil Area (mm) (W/100m) (W/100m) (pF/m) (pF/m) (V/100m) (V/100m) L-2T2S 656 20 .236 .039 -56 2 IPE AC-#23 <0.79 >94% <19.8 <9.4 22 33 88Ω 0.9 1.83 200m 9 6.0 1.0 -49 19.7 60/3.15 <20 TAC Braid <6.5 3.1 70 106 0.3 6.00 L-2E5 656 20.2 .181 .035 -56 2 IPE AC-#26 <0.79 >96.7% <38.7 <6.7 _ _ _ _ _ 200m 9 4.6 0.9 -49 30/3.15 Braid <12.7 2.2 L-2B2AT 656/1640 6/15 .126 .012 -13 2 IPE AC-#25 <0.99 100% <31.9 _ 23 37 _ _ _ 200m/500m 3/7 3.2 0.3 -25 12.6 16/4.73 <25 AL Tape <10.5 73 120 *Indicates special order colors at no extra charge National Order Line: 24 Hour Fax Orderline: West Coast Sales & Service: have@haveinc.com 800-999-HAVE (4283) 518-828-2008 661-266-1624 store.haveinc.com
  • 28. Bulk Audio Cable 29 Speaker Cable Star Quad - 4S6, 4S8, 4S11 Designed for distribution of signals from power amplifiers to loud-speakers. 4 large conductors can be wired in pairs so Great for electronic resistance is very low for little power loss. The pairing of conduc- instruments, hi-fi tors yields a 3 point increase in effective gauge. Perfect for interconnects, test pr Neutrik NL4FC Speakon connectors. obes, audio patch cords, and amp to ca binet leads CAN4S6 is 20 AWG with effective 17 AWG of combined twin conductors - available in 656 roll size; black & gray. Guitar/Keyboard Cable CAN4S8 is 16 AWG with effective 13 AWG of combined twin GS-6 Oxygen Free Copper conductors - available in 328 and 656 roll sizes; black & gray*. CAN4S11 is 14 AWG with effective 11 AWG of combined twin conductors - available in 328 and 656 roll sizes; gray only. GS-6 connects guitars, basses and other electric instruments to amps, effects units and mixers. Inner conductors are OXYGEN HAVEFlex Speaker Cables made FREE COPPER wire for exceptional flexibility and strength; avoids with 4S11 & 4S8 are on page 3! breakage due to wire fatigue, nicks or oxidizing. Polyethylene conductor insulation provides low capacitance and low series resistance. Double carbon/copper shield reduces microphone handling noise. Tough, flexible PVC jacket can be unpacked from extreme cold and used immediately. 18 AWG. Magnetic Field of 2-Conductor Cable CANGS6 is available in 656 roll size; black, blue, red, yellow*, & orange*. Tech Note: latively GS-4 st accomodate re Speaker cable mu pically tens to hundreds ty high signal levels, wer. Electromagnetic po of watts of RMS can radiate from these Size of magnetic field attenuates I) Interference (EM tly into adjacent low by 1/r² (r: distance from point of ec speaker lines dir crophone, video lines, center line for 2 conductors) . mi voltage cables (i.e this problem by using a Magnetic Field of s GS-4 is a miniature version of GS-6. Good choice for short run unbalanced etc.) Canare solve ad” configuration in all 4-Conductor Cable Qu audio interconnect and general instrumentation cables. 22 AWG. 4-conductor “Star cause every conductor speaker cables. Beme distance from the is located the sa g magnetic fields are CANGS4 is available in 656 roll size; black only. sin center, the oppo ation of magnetic field nu cancelled out. Atte r when compared to a radiation is superio r speaker wire. Size of magnetic field attenuates cto standard 2-condu by 1/r³ (r: distance from point of Some keyboard and guitar shops have tried using intersection of 4 diagonal lines Canares LV-61S or LV-77S video cable as an from 4 center conductors) instrument cable. They report good results and a"brighter sound"! (See page 6) Instrument CableM Model Standard Weight Nominal PVC Jacket Brittle Number Insulation Cond. AWG Dual Shield Chan. Shield Nominal Length Std. Length O.D. Nom. Thick. Point of Type (Qty./mil.) Coverage D.C.R. D.C.R. Cap. CABC0705-9 lbs. in. in. ºF Cond. Thick Cross Sec Area W/100 W/1000 pF/ft@1KHz (kg) (mm) (mm) (ºC) mil. (mil.²) (W/100m) (W/100m) (pF/m@1KHz) GS-6 656 22 .228 .039 -56 1 PE OCF-#18 OCF>92% <5.6 <7.6 49.0 200m 10 5.8 1.0 -49 33.5 127/3.94 Braid + Carbon Sleeve <1.8 <2.5 160 GS-4 656 12 .157 .028 -56 1 PE OCF-#22 OCF>93% <14.7 <9.8 47.0 200m 5 4.0 0.7 -49 19.7 50/3.94 Braid + Carbon Sleeve <4.8 <3.2 154 Speaker CableM Model Standard Weight Nominal PVC Jacket Brittle Number Cond. AWG Pitch Insulation Cond. Nominal Length Std. Length O.D. Nom. Thick. Point of (Qty./mil.) Twist Quad Type D.C.R. Cap. lbs. in. in. ºF Cond. Cross. Sec. in. W/100 pF/ft@1KHz (kg) (mm) (mm) (ºC) Area (mm) (W/100m) (pF/m@1KHz) 4S6 656 24 .252 .032 -56 RED,CLR RED AC#20 <1.78 PE 11.4 38 200m 11 6.4 .8 -49 WT,CLR WT 20/7.09 <20 19.7 3.7 125 4S8 656 42 .327 .043 -56 RED,CLR RED AC#16 <2.76 PE 4.5 44 200m 19 8.3 1.1 -49 50/7.09 <70 19.7 1.5 145 Our friendly, knowledgable staff is ready WT,CLR WT 4S11 656 70 .421 .047 -13 RED,CLR RED AC#14 <4.73 PE 2.6 45 to help answer all your cable questions! 200m 32 10.7 1.2 -25 WT,CLR WT 41/10.24 <120 27.6 0.9 146 *Indicates special order colors National Order Line: 24 Hour Fax Orderline: West Coast Sales & Service: have@haveinc.com800-999-HAVE (4283) 518-828-2008 661-266-1624 store.haveinc.com
  • 29. 30 Bulk Audio Multichannel Cable L-4E Series Snake Cable MR202 Series Snake Cable L-4E3-P Star Quad Braided Copper Shield MR202-AT Multichannel Microphone Cable 4 conductors individually jacketed, surrounded by an overall braided A practical, 100% foil shielded multichannel audio snake cable for shield encased in a color coded PVC outer jacket. Provides superior EMI general purpose applications. Each individually isolated channel consists and RFI noise rejection in problem areas on stage. More flexible than L- of 2 twisted conductors under an easy to strip PVC jacket extruded over 4E4-AT, for use in portable sound reinforcement applications. Black a foil shield and drain wire. Surprisingly flexible, this multichannel cable jacket. is perfect for control room layout and interfacing between equipment racks, audio patchbays, mixers and tape decks. Black jacket. CANL4E3P is available in 2, 4, 8, 12, 16, and 24 channels; 328 and 656 roll sizes. CANMR202AT is available in 2, 4, 8, 12, 16, 24, and 32 channels; 328 and 656 roll sizes. L-4E4-AT Star Quad Aluminum Tape Shield More economical than the braided shield L-4E3-P series, this 100% aluminum tape shielded Canare Star Quad multichannel snake cable is designed for all fixed audio installations. Each four conductor channel is completely isolated, contains Kevlar 29 for tensile pulling strength. The individual foil shield, drain wire and color coded striped PVC jacket strip easy for quick on-site termination. Gray jacket. CANL4E4AT is available in 2, 4, 8, 12, 16, and 24 channels; 328 and 656 roll sizes. Canare Star Quad is specially constructed to minimize the "loop area" between twists of the conductors, reducing susceptibility to electromagnetically induced noise. Excellent frequency response is maintained due to special iradiated polyethylene insulation which provides a low capacitance dielectric. Star Quad cable Our HAVEFlex DB25 cables handcrafted in our with braided shield is super flexible with a special own Guild Cable Shop use Canare MR-202 cable! compound PVC outer jacket. See our DB25 cables on page 4 Star Quad CableM Model Standard Number Weight Nominal PVC Jacket Brittle Number Channel Channel Insulation Cond. AWG Pitch Twist Shield Length of Quad 328/100m O.D. Nom. Thick. Point of Cond. O.D. Jacket Type (Qty./mil.) Quad Coverage Channels lbs. in. in. ºF (4 per in. Nom. Thick. Thick Cross. Sec. Area in. Chan. Drain Wire Q: Why use Canare? (kg) (mm) (ºC) Channel) (mm) mil mil. (mil.²) (mm) (Bundle Drain Wire) L-4E3-2P 328/656 2 18 .350 .032 -22 8 .134 PVC IPE AC-#28 <.63 AC Braid>93% 100m/200m 8 .8 -30 3.4 11.8 10.6 7/4.72 <16 (20 AWG) L-4E3-4P 328/656 4 31 .429 .043 -22 16 .134 PVC IPE AC-#28 <.63 AC Braid>93% A: It gives better sonic per- L-4E3-8P 100m/200m 328/656 8 14 57 .602 1.1 .051 -30 -22 32 3.4 .134 11.8 PVC 10.6 IPE 7/4.72 AC-#28 <16 <.63 (20 AWG) AC Braid>93% formance. It is softer, flexes L-4E4-2AT 100m/200m 328/656 2 26 18 .413 1.3 .051 -30 -22 8 3.4 .146 11.8 PVC 10.6 IPE 7/4.72 AC-#25 <16 <.83 (20 AWG) AL Foil 100% better and lasts longer. And L-4E4-4AT 100m/200m 328/656 4 8 40 .484 1.3 .055 -30 -22 16 3.7 .146 11.8 PVC 12.6 IPE 16/4.73 AC-#25 <21 <.83 (23 AWG) AL Foil 100% HAVE has it in stock for fast 100m/200m 18 1.4 -30 3.7 11.8 12.6 16/4.73 <21 (23 AWG) delivery! L-4E4-8AT 328/656 8 73 .665 .059 -22 32 .146 PVC IPE AC-#25 <.83 AL Foil 100% 100m/200m 33 1.5 -30 3.7 11.8 12.6 16/4.73 <21 (23 AWG) Multichannel CableM Model Standard Number Weight Nominal PVC Jacket Brittle Number Channel Channel Insulation Cond. AWG Pitch Shield Cond. Nominal Nominal Length of Std. Length O.D. Thick. Point of Cond. O.D. Jacket Type (Qty./mil.) of Pairs Coverage D.C.R. Cap. Cap. Channel lbs. in. in. ºF (2 per in. Thick. Thick Cross. Sec. Area in. W/100 pF/ft pF/ft Pairs (kg) (mm) (ºC) Channel) (mm) mil mil. (mil.²) (mm) (W/100m) (pF/m) (pF/m) MR202-2AT 328 2 12 .264 .032 -4 4 .106 11.8 IPE AC-#25 <.99 100% <32.5 23.2 43.3 100m 5 .8 -20 2.7 9.1 7/7.09 <25 AL Tape <10.7 76 142 MR202-4AT 328 4 17 .299 .032 -4 8 .106 11.8 IPE AC-#25 <.99 100% <32.5 23.2 43.3 100m 8 .8 -20 2.7 9.1 7/7.09 <25 AL Tape <10.7 76 142 MR202-8AT 328 8 35 .433 .039 -4 16 .106 11.8 IPE AC-#25 <.99 100% <32.5 23.2 43.3 100m 16 1.0 -20 2.7 9.1 7/7.09 <25 AL Tape <10.7 76 142 National Order Line: 24 Hour Fax Orderline: West Coast Sales & Service: have@haveinc.com 800-999-HAVE (4283) 518-828-2008 661-266-1624 store.haveinc.com
  • 30. Bulk Digital Audio & Data Cable 31 Digital Audio Cable For interconnecting DA206 110Ω Digital audio signals are transmitted at high, video- AES/EBU digital like frequencies and should be handled very differently audio systems than standard analog audio lines. Commonly available XLR-3 microphone cables have various impedance ratings and even in short lengths exhibit poor digital Specially designed to use with all 110Ω AES/EBU XLR-3 type equipment. transmission performance. The result is signal drop Good signal transmission performance allows for longer cable runs out due to severe impedance mis-matching between between equipment because DA206 is impedance matched! For AES/EBU 110Ω equipment: the solution - DA206 or interconnecting all DAW, R-DAT, D1, D2 digital audio I/0 systems. Max. the versatile, economical DA202. recommended AES/EBU length: 360m. The smooth outer jacket and stranded inner conductors give extra flexibility. A high density, basket weave braided shield blocks stray RF and electrostatic noise. Easily fits in all XLR-3 type connectors. Blue jacket. RS-422 Data Cable CANDA206 is 20 gauge. Available in 328 and 656 roll sizes. A2C3 DA202 110Ω The DA202 is a mini version of DA206. Intregal drain wire for easy Usable for RS-422 signals over short haul equipment wiring. Maximum recommended AES/EBU length: 180m. 25 AWG interconnect distances. Data channel uses special Foam PE conductors allow use with Punch Down Block Audio Bays. Blue jacket. insulation for extra low signal loss. A2C3-SS features 92.70% overall spiral shields! CANDA202 is 25 gauge. Available in 328 roll size only. CANA2C3 is available in 656 roll size; black jacket DA202AT 110Ω CANA2C3SS is available in 656 roll size; black jacket DA202AT has a foil shield with drain wire for easy termination, usable for short cable runs. Max. recommended AES/EBU length: 130m. Blue jacket. CANDA202AT is 25 gauge. Available in 656 roll size only. DA202-P 110Ω DA202-P is the Multi Channel version of DA202. Available in 2, 4, & 8 channels pairs. Max. recommended AES/EBU length: 180m. Blue jacket. CANDA202P is 25 gauge. Available in 328 roll sizes only. Toonces warms our laps & our hearts Digital Audio CableM Model Standard Weight Nominal PVC Jacket Brittle Number Insulation Cond. AWG Shield Cond. Shield Nominal Nominal Nominal Length Std. Length O.D. Thick. Point of Type (Qty./mil.) Coverage D.C.R. D.C.R. Cap. Cap. Impedance lbs. in. in. ºF Channels Thick Cross. Sec. Area W/100 W/1000 pF/ft pF/ft (kg) (mm) (mm) (ºC) mil. (mil.²) (W/100m) (W/100m) (pF/m) (pF/m) DA206 328/656 17/35 .287 .035 -56 1 IPE AC-#20 >95% <10.1 <4.3 14.6 22.3 110Ω 100m/200m 8/16 7.3 .9 -49 30.3 7/12.60 Braid <3.3 1.4 48 73 DA202 328 8 .197 .034 -56 1 IPE AC-#25 >95% <32.3 <6.8 _ _ 110Ω 100m 4 5.0 .8 -49 16.9 7/7.09 Braid <10.6 2.2 DA202AT 656 9 .157 .012 -56 1 IPE AC-#25 >95% <32.3 _ _ _ 110Ω 200m 4 4.0 .3 -49 20.9 7/7.09 Braid <10.6 CABC0705-9 DA202-2P 328 26 .421 .043 -56 2 IPE AC-#25 >95% <32.3 <7.0 _ _ 110Ω 100m 12 10.7 1.1 -49 16.9 7/7.09 Braid <10.6 <2.3 DA202-4P 328 42 .496 .047 -56 4 IPE AC-#25 >95% <32.3 <7.0 _ _ 110Ω 100m 19 12.6 1.2 -49 16.9 7/7.09 Braid <10.6 <2.3 DA202-8P 328 77 .646 .051 -56 8 IPE AC-#25 >95% <32.3 <7.0 _ _ 110Ω 100m 35 16.4 1.3 -49 16.9 7/7.09 Braid <10.6 <2.3 RS422 Data CableM Model Standard Weight Nominal Unit Qty. of Cond. Strand AWG Insulation Shield Insul. Channel Jacket Overall Length Std. Length O.D. Channel Unit (Qty./mm) Size Color Strand Type Jacket Nom. Thick. Shield lbs. in. (Cond.) Cross Sec. Area Code (mm/Qty.) in. Coverage (kg) (mm) (mm²) (mm) A Digital 2(4) 7/.127 #28 A1-RED/WHT 0.1/37-47 Foam BLK .032 _ A2C3 656 24 .260 Data TAC 0.09 A1-BLU/WHT Spiral Polyethylene GRY 6.00 200m 11 6.5 C Control 1(3) 11/.16 #24 BLK, BRN Not Vinyl .032 _ TAC 0.22 RED Available Chloride 6.00 A Digital 2(4) 7/.127 #28 A1-RED/WHT 0.1/37-47 Foam BLK .032 92.70% A2C3-SS 656 24 .260 Data TAC 0.09 A1-BLU/WHT Spiral Polyethylene GRY 6.00 200m 11 6.5 C Control 1(3) 11/.16 #24 BLK, BRN Not Vinyl .032 92.70% TAC 0.22 RED Available Chloride 6.00 National Order Line: 24 Hour Fax Orderline: West Coast Sales & Service: have@haveinc.com800-999-HAVE (4283) 518-828-2008 661-266-1624 store.haveinc.com
  • 31. 32 Bulk Audio Cable Available in cuts starting at 50 and full 1000 reels! Meets Cali fornia environme ntal standards! National Order Line: 24 Hour Fax Orderline: West Coast Sales & Service: have@haveinc.com 800-999-HAVE (4283) 518-828-2008 661-266-1624 store.haveinc.com
  • 32. Combo Audio/Video Cable 33 CABLE CROSS SECTION A2V1 A2V2-L A3V2-FB Special fillers in all composite cables prohibit cable component twisting! A/V COMPOSITE CABLE Audio/Video Composite Cable APPLICATIONS A2V1 • OB vans • ENG/EFP • A/V combo snakes • Studio lines For ENG/EFP/OB applications. Lightweight with a very thin profile OD of just .382". Includes two 25AWG balanced Audio lines Shop online! (Canare L-2B2AT type twisted pair with foil shield and drain wire) plus a single 75Ω Video Coax channel (Canare L-3C2V, featuring store.haveinc.com a PE dielectric with Solid Copper Center Conductor). CANA2V1 is available in 328 and 656 roll sizes; black outer jacket. A2V2-L Two balanced Audio lines (Canare L-2B2AT type twisted pair with foil shield and drain wire), two 75Ω Video Coax channel (Canare L-3C2V, featuring a Solid Center Conductor) plus four insulated "intercom/remote control tally lines" to trigger camera, VCR, or other switching functions. OD .433". CANA2V2L is available in 328 and 656 roll sizes; black outer jacket. A3V2-FB For ENG/EFP/OB applications. Lightweight with a reduced OD of just .488". Three balanced Audio channels (25 AWG twisted pair, foil shield Color coordinated boots are available, see page with drain wire) plus two Low Loss 75Ω Video Coax channels (Canare L- 53. See our connector reference chart later in 3CFB, featuring a FOAM core dielectric with Solid Copper Center Conductor and Double Shields; 91% Braid over 100% Foil). this catalog. CANA3V2FB is available in 656 roll size only; black outer jacket. CABC0705-9 Audio/Video Composite CableM Model Standard Nom. Weight Channel Cond. Insulation Shield Channel Channel Nominal Length O.D. Std. Length Unit Strand Type Coverage Jacket Unit OD Impedance in. lbs. Qty./mm PVC in. (mm) (kg) Type x Qty AWG Color Code Color Code (mm) HAVE is the largest full Coax 1/0.5 PE >97% AC Braid BLK .173 75Ω A2V1 328/656 .382 24/48 V 3C-2V x 1 #24 CLEAR (4.4) line stocking distributor in 100m/200m 9.7 11/22 Twisted Pair 16/0.12 IPE 100% AL FOIL GRY/RED,GRY/BLU .126 ___ the United States! This A 2B2-AT x 2 #25 ORN, WHT +TC Drain Wire (3.2) catalog represents Canares Coax 1/0.5 PE >97% AC Braid BLK/YEL,BLK .173 75Ω A2V2-L 328/656 .433 35/70 V 3C-2V x 2 #24 CLEAR (4.4) newest & most popular 100m/200m 11.0 16/32 Twisted Pair 16/0.12 IPE 100% AL FOIL GRY/RED,GRY/BLU .126 ___ A 2B2-AT x 2 #25 ORN, WHT +TC Drain Wire (3.2) products. If you dont see Coax V 3C-FB x 2 1/0.65 FOAM PE >91% TAC Braid YEL,WHT .173 75Ω what you want here, please A3V2-FB 656 .488 75 #24 CLEAR (4.4) 200m 12.4 34 Twisted Pair 16/0.12 IPE 100% AL FOIL GRY/YEL .126 ___ call! A 2B2-AT x 3 #25 ORN, WHT +TC Drain Wire GRY/RED,GRY/BLU (3.2) National Order Line: 24 Hour Fax Orderline: West Coast Sales & Service: have@haveinc.com800-999-HAVE (4283) 518-828-2008 661-266-1624 store.haveinc.com
  • 33. 34 Bulk Audio Cable Gepco Audio Cables Remember, this is just a small representation. We carry the full Consistently High Performance and available in a large variety of line of Gepco audio cable, including Quad Mic cable, Instrument types for all audio applications! Gepco is known for its quality Cable, and Plenum & Direct Burial Multipair Audio cables! construction and innovative features. Mic/Line Analog Audio Cable 20 Colors! Single Pair Digital Audio Cable D61801EZ Series DS Series 110-ohm Thin Profile Single Pair Low Attenuation, Low-Crosstalk and Easy to Strip. Great for Mic and Gepcos DS series of 110Ω AES/EBU digital audio Line Level Balanced Analog Audio. cables features extended bandwidth for high- NEW! • Cond. DCR 15.3 Ohms/1000’ Capacitance 34 pF/ft. resolution sampling rates in a new and extra-flexible construction, and are rated up to 25MHz to meet the GEPD61801EZGF 22AWG dual pair EZ strip. Blue with red stripe. AES3-2003 specifications for transmission of sampling rates up to GEP61801EZ 22AWG EZ strip single pair 100% Foil (bonded) 192kHz. Each pair features minimal attenuation, low-jitter, and a Shield. Now available in 20* colors! 110Ω impedance that remains stable when the cable is bent or ----------------------------------------------------------- ---------------------------------------------------------- flexed. The 26 gage, and 24 gage, thin-profile series is extremely M1042 flexible, easy-to-terminate, and has reduced diameters for use in Durable and rugged, extra low attenuation, heavy gauge conductors high-density terminations or with multi-pin connectors. and all weather jacket for hostile environments and long run mic and • DS601 Cond. DCR 38.5 Ohms/1000, Capacitance 14 pF/ft. line level blanced analog audio. Color: black. • DS401 Cond. DCR 12.8 Ohms/1000, Capacitance 11 pF/ft. • Cond. DCR 10.1 Ohms/1000’ Capacitance 20 pF/ft. GEPDS601 110Ω 26AWG thin profile, easy-to-terminate GEPM1042 20AWG heavy duty single pair GEPDS401 110Ω 24AWG thin profile, easy-to-terminate ----------------------------------------------------------- ---------------------------------------------------------- XB401 X-Band Single Pair Ultra-flexible, sonically transparent and LOW noise! Great for all balanced audio applications! Color: black. Multipair Digital Audio Cable • Cond. DCR 27.5 Ohms/1000’ Capacitance 17.5 pF/ft. DS Series 110-ohm Thin Profile Multipair Wide bandwidth, extended distance, and thin profile GEPXB401 24AWG single pair digital multipair audio cables from Gepco. Who could NEW! ask for more. Rated up to 25MHz to meet the AES3- Multipair Analog Audio Cable X-Band! 2003 specifications for transmission of sampling rates up XB4 X-Band Series to 192kHz. Great for studio interconnects, permanent installs, The X-Band series is ULTRA-FLEXIBLE, sonically transparent, low noise, portable or permanent digital audio snakes. Jacket color: Black. and durable. For use in critical recording studio facilities or live sound • DS6 series Cond. DCR 38.5 Ohms/1000, Capacitance 14 pF/ft. venues. OXYGEN FREE Copper Conductors! Color: black. • DS4 series Cond. DCR 12.8 Ohms/1000, Capacitance 11 pF/ft. • Cond. DCR 27.5 Ohms/1000’ Capacitance 17.5 pF/ft. GEPDS6** 110Ω 26AWG thin profile GEPXB4** 24AWG ultra flexible - **Available in 4, 8, 12, 16 pairs **Available in 4, 8, 12, 16, 24 pairs ----------------------------------------------------------- ---------------------------------------------------------- GEPDS4** 110Ω 24AWG thin profile GA618 Series **Available in 4, 8, 12 pairs The original Gep-Flex Multipair! Designed for low noise & attenuation, this cable is durable, easy to terminate and UL rated. Color: blue. • Cond. DCR 15.3 Ohms/1000’ Capacitance 26 pF/ft. GEPGA618**GFC 22AWG Gep Flex multipair for long runs **Available in 2, 4, 6, 8, 12, 16, 20, 26, 32 pairs ----------------------------------------------------------- ---------------------------------------------------------- GA724 Series Thin Profile version of the original Gep-Flex thin profile multipair Bulk Gepco cable sold starting at 50’ lengths cable. Easy Strip and flexible. Color: black. or in full reels of 1000’ • Cond. DCR 23.8 Ohms/1000’ Capacitance 28 pF/ft. *Colors: Black, Brown, Blue, Navy Blue, Royal Blue, Chrome, GEPGA724**GFC 24AWG Gep Flex multipair for long runs Gray, Green, Lime Green, Mediterranean Green, Orange, **Available in 2, 4, 8, 12, 16, 26, 32 pairs Pink, Plum, Pumpkin, Red, Tan, Teal, Violet, White, Yellow National Order Line: 24 Hour Fax Orderline: West Coast Sales & Service: have@haveinc.com 800-999-HAVE (4283) 518-828-2008 661-266-1624 store.haveinc.com
  • 34. Bulk Audio Cable 35 Mogami Mic/Mini/Console Cable NEGLEX Microphone Cable - 4 Conductor NEGLEX Console Cable - 2 Conductor Quad Cable! A popular standard for high quality digital and analog recording. Use Provides high quality wiring for mixing consoles, rack panels and with unbalanced equipment such as high quality pre-amps, amp inputs electronic studio equipment. Two convenient sizes – 2944 26AWG in or recording decks. Available in black, blue, brown, gray, green, 328’ & 656’ Roll sizes, 2806 22AWG in 328’ & 656’ Roll Size. orange, red, purple, yellow, & white. 328’ and 656’ roll sizes MOG2944 Standard 2 Conductor Console Cable. Available in black, MOG2534 Neglex Quad Mic Cable blue, brown, gray, green, orange, red, purple, yellow, & white. ----------------------------------------------------------- ---------------------------------------------------------- MOG2806 Large 2 Conductor Console Cable. Available in gray only. NEGLEX Mini Microphone Cable - 4 Conductor ----------------------------------------------------------- ---------------------------------------------------------- NEGLEX Console Cable - 4 Conductor Superflexible! Ideal for small hand held mics and quad patch cords. This is a popular cable where small diameter quad cable is required. Quad design is useful in preventing induced noise from electromagnetic Available in black, blue, & red. 328’ & 656’ Roll Size. fields such as transformers, motors, noise generating lights and SCR dimmers. Available in gray only. 2799: 26AWG in 328’ & 656’ Roll MOG2893 Neglex Mini Quad Mic Cable size. 2820: 24AWG in 328’ & 656’ Roll Size. ----------------------------------------------------------- ---------------------------------------------------------- Microphone Cable - 2 Conductor MOG2799 Mini Quad Console Cable Easy to MOG2820 Large Size Quad Console Cable work with! Low-cost, High-Performance and Super Flexible are the claim to fame of this great cable. Great for low impedance balanced mic cables, and its See Mogami S-Video cable on page 21! small diameter, special rubber-like PVC jacket makes it extremely flexible and resistant to rough handling and abrasion. Available in black. 328 & 656 roll sizes. MOG2552 2 Conductor Balanced Mic Cable Mogami Bulk Snake Cable EZ ID Series 2900 - Super Flexible Multi Pair Shop online! Ease of identification, combined with high performance specs make this cable the pro audio installers choice for world class fixed audio store.haveinc.com installations. Mogami’s special XLPE cross linked polyethelene insulation provides superb electrical characteristics and will not melt or shrink back during soldering. The unique spiral-wrap copper shield is combined with a drain wire for each pair to provide maximum protection and ease of termination. MOGAMI EZ Series 2900 – the CABC0705-9 recording studio standard! This is only a small selection of the most popular products from Mogami. We carry the complete Mogami line! MOG2931 4 Channel, available in 328 reels (black jacket) MOG2932 8 Channel, available in 328 reels (black jacket) • Oxygen Free Copper MOG2933 12 Channel, available in 328 reels (black jacket) • Spiral wrap shield for high quality sound and easy prep MOG2934 16 Channel, available in 328 reels (black jacket) MOG2936 24 Channel, available in 328 reels (black jacket) • Years of rugged performance • Unbelievably Flexible Also available in 2, 19, 27, 32 and 48 channel configurations. Please call. • XLPE – Mogami cross linked polyethylene dielectric • Available in full reels, or cuts as special orders Please also call for MOGAMI 3000 series multipair snake CL2 rated version! National Order Line: 24 Hour Fax Orderline: West Coast Sales & Service: have@haveinc.com800-999-HAVE (4283) 518-828-2008 661-266-1624 store.haveinc.com
  • 35. 36 Belden Bulk Audio Cable Analog Mic/Line Level Cable Analog Multipair Snake Cable 8451 & 9451 1500 Series (CM Rated) Considered to be the standard 2-conductor rack wire. Beldfoil aluminum/polyester shield with drain wire. The most popular 22 Belden’s line of flexible 24 AWG (7x32) audio snake cables are smaller in AWG audio cable made. 9451 version has Bonded Beldfoil. size and easier to handle and install than a 22 AWG cable, yet they Jacket and shield can be removed easily by automated equipment. support audio over the same distance. These CM rated cables are ideal Available in Black & Gray. for interconnecting audio mixing equipment in concert applications, television and radio equipment, and post-production facilities. BEL8451 1 Pair 22AWG analog audio cable, 500’ & 1000’ roll sizes Individual pairs with color coded jackets. Overall black matte PVC jacket BEL9451 1 Pair 22AWG bonded Beldfoil analog audio cable, 1000’ with nylon ripcord. 500’ & 1000’ roll sizes. roll size only ----------------------------------------------------------- ---------------------------------------------------------- BEL1509C 2 Pair 24AWG with BELDFOIL® shield 1504A BEL1510C 4 Pair 24AWG with BELDFOIL® shield BEL1512C* 8 Pair 24AWG with BELDFOIL® shield BEL1513C 12 Pair 24AWG with BELDFOIL® shield BEL1514C 16 Pair 24AWG with BELDFOIL® shield BEL1516C 24 Pair 24AWG with BELDFOIL® shield Stereo dual-channel audio cable in zip-cord construction for ease of installation. Individual jackets, each containing a twisted pair, 1400 Series (Riser Rated) together in a single cable that can be easily separated for individual termination. One pair striped for easy ID. Bonded Beldfoil for easy punch down installation Gray & red jacket. 1000’ roll size. BEL1504A Dual Pair 22AWG analog audio cable Great for Riser Rated analog audio applications and available in a variety ----------------------------------------------------------- ---------------------------------------------------------- of pair choices, with individually shielded and jacketed pairs. Overall 8412 black PVC jacket with nylon rip cord. Bonded Beldfoil for easier prep. 500’ & 1000’ roll sizes. BEL1408R 4 Pair 24AWG with BELDFOIL® shield BEL1410R* 8 Pair 24AWG with BELDFOIL® shield This almost bomb-proof 2-conductor mic cable is considered to BEL1411R 12 Pair 24AWG with BELDFOIL® shield be the toughest cable made. Its EDPM rubber jacket resists most BEL1412R 16 Pair 24AWG with BELDFOIL® shield everything and will stand up to anything you can give it. Avail- BEL1414R 24 Pair 24AWG with BELDFOIL® shield able in Black. 250’, 500’, & 1000’ roll sizes. BEL1416R 32 Pair 24AWG with BELDFOIL® shield BEL8412 20AWG Twisted Pair analog audio mic cable 1900 Series (Flexnake) ----------------------------------------------------------- ---------------------------------------------------------- 1192A Designed to surpass Mogami, this cable gets its flexibility from its 24 AWG (41x40) stranded center conductor and Belden exclusive French Belden 1192A has become a very popular alternative for star braid shield. Durable PVC matte black jacket feels like rubber. Individual quad users. A tight braid and ultra-flexible jacket make this an pairs numbered and color coded. Fits ELCO and EDAC connectors. excellent microphone cable. Black available in 100’, 500’ and 250’, 500’, & 1000’ roll sizes. 1000’ roll sizes. Blue, Gray, Green, Red and Yellow in 1000’ roll size only. BEL1902A 2 Pair 24AWG BEL1904A 4 Pair 24AWG BEL1192A 24 AWG Quad Conductors analog microphone cable BEL1908A* 8 Pair 24AWG BEL1912A 12 Pair 24AWG BEL1916A 16 Pair 24AWG Shop online! BEL1924A 24 Pair 24AWG store.haveinc.com *25-pin D-Sub Connector Compatible National Order Line: 24 Hour Fax Orderline: West Coast Sales & Service: have@haveinc.com 800-999-HAVE (4283) 518-828-2008 661-266-1624 store.haveinc.com
  • 36. Belden Bulk Audio Cable 37 Digital Audio Cable Single Pair Both great 110Ω cables for all AES/EBU digital audio applications. Low capacitance, with Datalene® insulation. BEL1800B AES/EBU, TC conductor, 100% Al foil outer shield. 24AWG Single Pair; Available in gray and violet, 1000’ rolls BEL1800F Riser rated AES/EBU, BC conductor, 95% TC outer shield. 24AWG Single Pair; Available in black only, 500’ rolls Multipair Digital Snake CM rated AES/EBU digital audio multipair snake cable. Available in 500’ & 1000’ roll sizes. BEL1803F 4 Pair 24AWG BEL1805F 8 Pair 24AWG BEL1806F 12 Pair 24AWG Speaker Cable BEL1850F 16 Pair 24AWG BEL1852F 24 Pair 24AWG 1810A & 8477 Belden 1810A speaker cable is great for use with Speakon connectors. Belden 8477 is CL3 Rated 2 conductor speaker cable for in-wall use! We are an OEM manufacturer with Belden cable! We can supply any Belden cable you need: for details about BEL1810A Non-paired high flex 4 conductor – 14AWG; 250’, our complete lineup, contact our sales department 500’ & 1000’ roll sizes BEL8477 2 conductor speaker cable – 12AWG; 500’ & 1000’ roll sizes Belden Audio CableM Part Type AWG/ Number O.D. Cap. Shield Jacket Notes Strand of Pairs (in.) pF/ft BEL8451 Analog Audio 22/7x30 1 0.138 34 100% Beldfoil PVC/CM BEL9451 Analog Audio 22/7x30 1 0.135 34 100% Bonded Foil PVC/CM BEL1504A Analog Audio - Dual Pair 22/19x34 2 .143x.300 57 100% Beldfoil PVC/CM BEL8412 Analog Audio - Mic 20/26x34 1 0.262 30 85% Braid EPDM For XLR BEL1192A Analog Audio/Quad 24/42x40 4 cond. 0.245 39.2 95% Tinned Copper Braid PVC Quad BEL1509C Analog Audio Multipair 24/7x32 2 0.295 31 Beldfoil PVC CM Rated BEL1510C Analog Audio Multipair 24/7x32 4 0.352 31 Beldfoil PVC CM Rated BEL1512C Analog Audio Multipair 24/7x32 8 0.452 31 Beldfoil PVC CM Rated BEL1513C Analog Audio Multipair 24/7x32 12 0.561 31 Beldfoil PVC CM Rated BEL1514C Analog Audio Multipair 24/7x32 16 0.628 31 Beldfoil PVC CM Rated BEL1516C Analog Audio Multipair 24/7x32 24 0.807 31 Beldfoil PVC CM Rated BEL1408R Analog Audio Multipair 24/7x32 4 0.346 31 Beldfoil PVC Riser Rated BEL1410R Analog Audio Multipair 24/7x32 8 0.446 31 Beldfoil PVC Riser Rated BEL1411R Analog Audio Multipair 24/7x32 12 0.555 31 Beldfoil PVC Riser Rated BEL1412R Analog Audio Multipair 24/7x32 16 0.622 31 Beldfoil PVC Riser Rated CABC0705-9 BEL1414R Analog Audio Multipair 24/7x32 24 0.801 31 Beldfoil PVC Riser Rated BEL1416R Analog Audio Multipair 24/7x32 32 0.888 31 Beldfoil PVC Riser Rated BEL1902A Analog Audio Multipair 24/41x40 2 0.33 26 93% French Braid PVC FlexNake BEL1904A Analog Audio Multipair 24/41x40 4 0.372 26 93% French Braid PVC FlexNake BEL1908A Analog Audio Multipair 24/41x40 8 0.482 26 93% French Braid PVC FlexNake BEL1912A Analog Audio Multipair 24/41x40 12 0.602 26 93% French Braid PVC FlexNake BEL1916A Analog Audio Multipair 24/41x40 16 0.683 26 93% French Braid PVC FlexNake BEL1924A Analog Audio Multipair 24/41x40 24 0.825 26 93% French Braid PVC FlexNake BEL1800B Digital Audio 24/7x32 1 0.18 12 95% Braid PVC/CMG 110-ohm AES/EBU BEL1800F Digital Audio 24/24x42 1 0.211 13 95% French Braid PVC 110-ohm AES/EBU BEL1803F Digital Audio Multipair 24/7x32 4 0.485 13 100% Beldfoil PVC CM Rated 110-ohm AES/EBU BEL1805F Digital Audio Multipair 24/7x32 8 0.661 13 100% Beldfoil PVC CM Rated 110-ohm AES/EBU BEL1806F Digital Audio Multipair 24/7x32 12 0.829 13 100% Beldfoil PVC CM Rated 110-ohm AES/EBU BEL1850F Digital Audio Multipair 24/7x32 16 0.944 13 100% Beldfoil PVC CM Rated 110-ohm AES/EBU BEL1852F Digital Audio Multipair 24/7x32 24 1.205 13 100% Beldfoil PVC CM Rated 110-ohm AES/EBU BEL1810A Speaker Cable 14/104x34 0.39 PVC Hi-Flex 4 Cond. Speaker BEL8477 Speaker Cable 12/65x30 0.386 35 PVC Insulated CL3 Rated/Paired (1) National Order Line: 24 Hour Fax Orderline: West Coast Sales & Service: have@haveinc.com800-999-HAVE (4283) 518-828-2008 661-266-1624 store.haveinc.com
  • 37. 38 Belden Bulk Data Cable Home Automation Cable Banana Peel Datatwist Cat5E Installing composite cable is now simpler and more efficient than Belden enhanced Cat 5 DataTwist unshielded twisted pair cables ever. Belden® UL-verified Banana Peel composite cables feature a answer future networking demands today. Theyre the result of a unique Patent Pending design that eliminates the need for an unique, patented design and process which allows stable electrical overall jacket, making these cables easy to handle, easy to performance to 350MHz, more than triple the verified frequency identify, easy to pull and easy to terminate. Just peel the cables range of the TIA/EIA 568-A Category 5 standard. Great for Premise off the center spline, and you’re in business. And since the overall Horizontal Cable, Gigabit Ethernet, 100BaseTX, 100BaseVG jacket has been eliminated, the outer diameter is smaller than ANYLAN, 155ATM, 622ATM, NTSC/PAL Component or Composite other composite cables, improving the overall bend radius for Video, AES/EBU, Digital Video, RS-422, or Noisy Environments. 4 easier installation. The Series 6 coaxes feature Belden’s innovative, Pairs, 24 AWG. Available in blue, red, & yellow; 1000’ Reel. high performance Duobond Plus® shielding. The LANLite® Ethernet grade fiber cables are 62.5 micron tight buffered Datatwist Bonded Cat5E constructions. And because they’re all made by Belden, you can BEL1700A Datatwist Bonded 4 pair Cat 5 cable be sure the performance you pay for is the performance you BEL1701A Datatwist Bonded 4 pair Cat 5 cable Plenum receive. Banana Peel... it may just be nature’s perfect cable. 500’ and 1000’ reels. Datatwist Cat5E BEL1583A Datatwist 4 pair Cat 5E cable; available in blue BEL7914A Homechoice composite cable with overall jacket BEL1585A Datatwist 4 pair Cat 5E cable Plenum with Flamarrest BEL7914S Banana Peel Homechoice composite cable (unjacketed) jacket; available in blue • Two Cat5e 4-pair bonded UTP Cables: UTP verified(UL) to Cat5e 24 AWG Solid Bare Copper polyolefin insulated. Jacket Datatuff® Enhanced Cat5E Cable - Riser Rated Color and Type: Blue & Green Flame Resistant PVC BEL11700A Datatuff 4 pair Cat 5 cable. Great for industrial • Two Series 6 (RG6) Duobond® IV Quad Shield, Swept to ethernet and gigabit ethernet. Built for extreme and noisy 2.25 GHz Jacket Color and Type: Black & White Flame environments! Available in gray and black. Resistant PVC ----------------------------------------------------------- ---------------------------------------------------------- • Gigabit Ethernet-grade fiber 62.5/125/900 micron tight RS232/423 Data Cable buffered fiber. Jacket Color and Type: Orange Flame Resistant PVC Media Twist Belden’s Non-Paired Low Capacitance EIA RS-232/423 9-conductor cable is the right stuff for RS232 computer cables! 1000’ reel. BEL9934 RS232/423 9 conductor data cable Belden MediaTwist® Cat6 UTP Cable Enhanced Category6 Bonded-Pair Cable. Through Media Twist Belden has created a unique cable design which delivers the ultimate in unshielded twisted pair performance. Media Twist utilizes a unique patented design and manufacturing process to produce the ultimate in UTP performance technology. 24 awg solid bare copper conduc- tors, 4 twisted pairs. Cat6 Jacket sequentially marked at two foot intervals. 1000’ Reel Length. BEL1872A Media Twist Cat 6 data/audio/video cable; available in black, blue, gray, orange, red, & yellow BEL1874A Media Twist Cat 6 data/audio/video cable Plenum; available in natural color New Gepco CT504HD Heavy Duty CAT5E cable is now available - call for details! Neutrik Ethercon RJ45 connectors are on pg 57. See the rest of our connector selection on pages 43 - 58! Some of our Pro Products team! National Order Line: 24 Hour Fax Orderline: West Coast Sales & Service: have@haveinc.com 800-999-HAVE (4283) 518-828-2008 661-266-1624 store.haveinc.com
  • 38. Belden Bulk Video Cable 39 Single Channel Video Cable Multichannel Coax Video Cable 8241F 1400 & 1500 Series Great standard 75-Ω analog video coax for use anywhere high quality Great for Riser Rated analog audio applications and available in a variety RG59 is important. Stranded conductor for maximum flexibility! 1000’ of pair choices, with individually shielded and jacketed pairs. Overall roll size; available in black, blue, gray, green, red, white, & yellow. black PVC jacket with nylon rip cord. Bonded Beldfoil for easier prep. 1400 series available in 1000’ roll sizes; 1500 series available in 500’ & BEL8241F Standard analog video coax cable. RG59/U, 22AWG 1000’ roll sizes. stranded conductor; 17.3 pF/ft, 95% braid Hi-flex. ----------------------------------------------------------- ---------------------------------------------------------- BEL1406B RG59 coax snake, 26AWG 3 channel; 17.3 pF/ft, 8281F & 88281 93% Beldfoil shield BEL1407B RG59 coax snake, 26AWG 4 channel; 17.3 pF/ft, 93% Beldfoil shield BEL1417B RG59 coax snake, 26AWG 5 channel; 17.3 pF/ft, 93% Beldfoil shield Precision double-shielded 75-Ω video cable made to tight tolerances for BEL1520A Mini RGB coax snake, 30AWG 3 channel; 17.3 pF/ft, excellent return loss performance. 8281F is a high-flex cable for use in 100% Beldfoil shield difficult rack installations. Great for Analog and Digital, HDTV/SDI, BEL1521A Mini RGB coax snake, 30AWG 4 channel; 17.3 pF/ft, Broadband Coax, Headend/Video Cables. 1000’ roll size 100% Beldfoil shield BEL1522A Mini RGB coax snake, 30AWG 5 channel; 17.3 pF/ft, BEL8281F Precision video coax cable. RG59/U, 22AWG 100% Beldfoil shield stranded conductor; 20.5 pF/ft, 98% double braid Hi-flex; available in black, blue, gray, green, & red We carry MANY more types of Belden MultiChannel 75-Ω video cable, BEL88281 Precision video coax cable. RG59/U, 20AWG Plenum please call! stranded conductor; 19.5 pF/ft, 98% double braid; available in black ----------------------------------------------------------- ---------------------------------------------------------- Shop online! 1505A & 1506A store.haveinc.com See Belden S-Video cable on page 21! For great signal integrity use these 75-Ω precision video cables in critical analog video circuits and high quality applications like live broadcast in network studios and post-production facilities. Tight impedance and Triax Cable attenuation tolerances and great shielding provide no-compromise Triax performance. 1000’ roll size. BEL1505A Precision video coax cable. RG59/U, 20AWG solid conductor; 16.2 pF/ft, 100% Beldfoil shield; available in black, blue, brown, gray, green, orange, red, violet, white, & yellow BEL1506A Precision video coax cable. RG59/U, 20AWG Plenum We offer here, three types of Belden’s many Triaxial cables. The same solid conductor; 16.2 pF/ft, 100% Beldfoil shield, Flamarrest CM ones we use to make our own PROFlex Triax Cable Assemblies (see page rated jacket; available in black, orange, violet, white, & yellow 17) Belden Triax is precisely made, and covers a wide range of ----------------------------------------------------------- ---------------------------------------------------------- applications. 500’ & 1000’ roll sizes. 1694A & 1695A • 1856A Flexible 20 AWG solid copper conductor • 1857A Most popular! High Flex version of 1856A w/ 22 AWG Great for SDI! stranded copper conductor, great for remote/field use • 9267 Flexible 20 AWG solid copper conductor with flame CABC0705-9 resistance rating VW-1 Belden’s RG-6 75-Ω construction provides 20% lower attenuation than • 9267 also suitable for direct burial/rugged use applications traditional precision video cables at current serial digital frequencies. • All 3 offer dual copper braid shields with 95% coverage, gas- And as much as 30% lower attenuation at 1GHz. Great for high injected foam HDPE insulation and low capacitance performance over extended distances. 1000’ roll size, available in black, blue, brown, gray, green, orange, red, violet, white, & yellow. BEL1856A RG59 type triax. 75ohm Flexible 20 AWG; 16.2 pF/ ft; available in black, 1000’ roll size only. BEL1694A Precision video coax cable. RG6/U, 18AWG solid BEL1857A RG59 type triax. 75ohm Flexible 22 AWG; 17.0 pF/ conductor ; 16.3 pF/ft, 100% foil/braid ft; available in black, blue, green, red, violet, & yellow BEL1695A Precision video coax cable. RG6/U, 18AWG Plenum BEL9267 RG59 type triax. 75ohm VW rated 20 AWG; 16.1 pF/ solid conductor ; 16.1 pF/ft, 100% foil/braid (black & red only) ft; available in black, blue, green, red, & yellow National Order Line: 24 Hour Fax Orderline: West Coast Sales & Service: have@haveinc.com800-999-HAVE (4283) 518-828-2008 661-266-1624 store.haveinc.com
  • 39. 40 Video Coaxial Cable BLACK • BLUE • BROWN • GRAY • GREEN • ORANGE • PURPLE • RED • YELLOW • WHITE Coaxial Video Cable Great for Word Cloc 75Ω Serial Digital Cable k, SPDIF, LV-61S field broadcasting, vid L-CFB Series eo patchbays, inter-rack wiring, an alog or digital. Super flexible! Super flexible RG59/U equivalent 75Ω coax cable that is perfect for all Ideal interconnects for long serial digital runs. Terminates to video facility equipment interfacing and video patch cord assemblies. Canare true 75Ω BNC crimp plugs for impedance matched, low Excellent for runs up to 75. VSWR performance. L-5CFB outperforms 8281 by >3dB per ----------------------------------------------------------- ---------------------------------------------------------- 100m @ 400MHz! Double shields: 100% foil tape and 93% CANLV61S RG59/U type 24AWG is available in 500 roll size; all copper braid. Low loss foam PE dielectric coax cable for WIDE- 10 colors. BAND transmission. Solid copper center conductor. LV-77S CANL2.5CFB Micro Coax 24 AWG. 984 roll size; black only. CANL3CFB Micro Coax 22 AWG. 984 roll size; black, blue, green, & red. CANL4CFB RG59 Type 20 AWG. 984 roll size; black, blue, green, red, & yellow. A super flexible, 75Ω 8281 F type double shielded, precision CANL5CFB RG6 Type 18 AWG. 984 roll size; black, blue, video coax. Ideal for long runs over 75. Good return loss green, red, & yellow. characteristics and excellent signal isolation. CANL7CFB RGII Type is 15 AWG. 984 roll size; black only. ----------------------------------------------------------- ---------------------------------------------------------- ----------------------------------------------------------- ---------------------------------------------------------- CANLV77S Double shielded RG59/U type 22AWG is available in Serial Digital HDTV-SDI Cable 500 roll size; all 10 colors. L-CHD Series L-3C-2VS NEW ! Canares 75Ω Precision Serial Digital Coaxial Video Cable is ideal for Thinnest 75Ω coax, light weight and super flexible. Ideal for short transmitting HDTV-SDI signals in fixed installation applications.* Offers run inter-rack control room wiring. the professional broadcaster a high performance, low loss digital coax that meets the demands of Serial Digital Video and HDTV standards. All CANL3C2VS Mini 25AWG standard is available in 656 roll size; 3 types will carry uncompressed HDTV signals over 500 feet. Special 3 black, blue, green, & red. layer insulation for increased strength and humidity resistance. *Not for use where external pressure is unavoidable CANL6CHD 15 AWG. Available in 984 roll size; black only. For Canare RCAP& BNC connectors, see pg 55! CANL7CHD 13 AWG. Available in 984 roll size; black only. CANL8CHD 12 AWG. Available in 984 roll size; black only. Serial Digital CableM Model Standard Weight Nominal Jacket Brittle Cond. AWG Cond. Insul. Insul. Shield Cond. Shield Nominal Nominal Max. SDI Velocity Length Std. Length O.D. Nom. Thick. Point (Qty./mil.) O.D. Type O.D. Inner/Outer D.C.R. D.C.R. Cap. (1KHz) Imp. trans. of lbs. in. (mil) ºF Cross. Sec. Area in. Thick. in. (mil/qty/pitch) W/100 W/1000 pF/ft (10MHz) length @ Prop. (mm) (ºC) (mil.²) (mm) (mm) (mm) Coverage (W/100m) (W/100m) (pF/m) (pF/m) 270MB/s L-2.5CFB 984 17 .157 -22 AC - #25 .02 Foam PE .094 TAC 28.35 <7.3 17 75Ω 614 79% 300m 4.0 -30 .5 2.4 >92% 9.3 <2.4 55 L-3CFB 984 29 .217 -22 AC - #22 .026 Foam PE .122 TAC 16.8 <4.3 17 75Ω 830 79% 300m 5.5 -30 .65 3.1 >91% 5.5 <1.4 55 L-4CFB 984 33 .240 -22 AC - #20 .032 Foam PE .146 TAC 11.0 <3.0 17 75Ω 920 79% 300m 6.1 -30 .80 3.7 >93% 3.6 <1.0 55 L-5CFB 984 49 .303 -22 AC - #18 .041 Foam PE .192 TAC 7.0 <2.1 17 75Ω 1210 79% 300m 7.7 -30 1.05 4.9 >93% 2.3 <.7 55 L-7CFB 984 86 .402 -22 AC - #15 .059 Foam PE .287 TAC 3.1 <1.4 17 75Ω 1660 79% 300m 10.2 -30 1.50 7.3 >96% 1.0 <.5 55 L-6CHB 984 66 .350 .040 -22 BC - #15 .059 Foam PE .240 AL Foil 100% 3.13 <2.35 15 75Ω 505** 89% 300m 8.9 1.0 -30 1.50 6.1 TAC >92% 1.03 <.77 50 L-7CHB 984 87 .401 .040 -22 BC - #13 .071 Foam PE .287 AL Foil 100% 2.16 <1.86 15 75Ω 587 89% 300m 10.2 1.0 -30 1.8 7.3 TAC >92% .71 <.61 50 L-8CHB 984 93 .402 .040 -22 BC - #12 .080 Foam PE .323 AL Foil 100% 1.77 <1.92 15 75Ω 728 89% 300m 10.2 1.0 -30 2.03 8.2 TAC >89% .58 <.63 50 **HDTV length @ 1.485 GB/s Coaxial CableM Model Standard Weight Nominal Jacket Brittle Cond. AWG Cond. Insul. Insul. Shield Cond. Shield Nominal Nominal Nominal Velocity Length Std. Length O.D. Nom. Thick. Point (Qty./mil.) O.D. Type O.D. Inner/Outer D.C.R. D.C.R. Cap. (1KHz) Imp. Atten. of lbs. in. (mil) ºF Cross. Sec. Area in. Thick. in. (mil/qty/pitch) W/100 W/1000 pF/ft (10MHz) dB/1000 Prop. (mm) (ºC) (mil.²) (mm) (mm) (mm) Coverage (W/100m) (W/100m) (pF/m) (pF/m) (dB/100m) L-3C2VS 656 20 .217 PVC -22 AC - #25 .021 PE .122 AC 32.1 <.99 5.8 75Ω 15 66% 200m 5.5 39.4 -30 7/7.09 279 .54 50.4 3.10 4.73/7/16 >94% 10.5 <25 1.9 4.9 LV-61S 500 19 .240 PVC -22 AC - #24 .024 PE .142 AC 25.9 <.99 4.0 75Ω 13 66% 153m 6.1 39.4 -30 7/7.88 341 .60 59.1 3.60 4.73/6/24 >95% 8.5 <25 1.3 4.2 LV-77S 500 32 .303 PVC -22 AC - #22 .031 PE .189 4.73/7/24 >92% 15.3 <.99 _ 75Ω 10 66% 153m 7.7 39.4 -30 7/10.24 574 .78 79.1 4.80 4.73/8/24 >96% 5.0 <25 3.4 National Order Line: 24 Hour Fax Orderline: West Coast Sales & Service: have@haveinc.com 800-999-HAVE (4283) 518-828-2008 661-266-1624 store.haveinc.com
  • 40. Multichannel Coaxial Video Cable 41 75Ω Video Coaxial Cable V-C Series CANV1.5C Ultra-mini micro coax, for excellent flexibility specifically designed for short run RGB fan-out cables. 3, 4, and 5 channel is available in 328 roll size; black outer jacket.* CANV-3C Most popular 75Ω series. Similar to RG59 perfor- mance. Good for limited length cable runs or where conduit size may be restricted.3, 4, and 5 channel is available in 328 and 656 roll sizes; black outer jacket.* CANV-5C 8281 performance with super flexibility in a multichannel cable for extra long cable runs over wide bandwidth RGB compo- nent analog systems. For field operations where cable strength and durability is a must.3, 4, and 5 channel is available in 328 and 656 roll sizes; black outer jacket.* V-CFB Series (Digital) Our PROFlex™ Specifically designed for SERIAL DIGITAL and HDTV facilities. V-5CFB Digital Multichannel cable assemblies are exceeds 8281 performance by >3dB per 100m @ 400MHz. Foam made using Canare cable - see page 19! core PE dielectric. 18 AWG solid copper center conductor double shielded. Use with confidence for super hi-res CG workstation interconnects. 328’ & 984’ roll sizes; black jacket only. Shop online! CANV-3CFB 3, 4, and 5 channel CANV-4CFB 3, 4, and 5 channel store.haveinc.com CANV-5CFB 3, 4, and 5 channel *3 channel inner jackets are red, green, & blue. 4 channel cable also includes white, and 5 channel includes white and yellow inner jackets. Multichannel CableM Cable Std. Wt. Std. Nom. Jacket Number Brittle Indv. Insul. Insul. Cond. - AWG Cond. Shield Cond. DCR Shield DCR Nom. Cap. Nom. Nom. Atten. Chan. Velocity Lng. Lng. O.D. Nom. of Point Chan.O.D. Type* O.D. (Qty./mil.) O.D. (mil/qty/pitch) (1KHz) Imp. Diff. of Prop. (lbs.) (in.) Thick Chanels (ºF) (in.) Thick. (in.) CrossSec.Area (in.) Coverage (W/1000) (W/1000) (pF/ft) (10MHz) (dB/1000) Delay (mm.) (mil.) (ºC) (mm) (mm) (mm) (mil. 2) (mm.) (%) (W/100m) (W/100m) (pF/mt) (dB/100m) (nS) V3-3CFB 31 .453 .035 3 328 93 11.5 .90 V4-3CFB 100m 42 .512 .043 4 -22 .173 FPE .122 AC - #22 .026 TAC >91% <17.1 <4.3 17 75Ω ----- <2.2 79% 984 126 13.0 1.10 -30 4.4 3.1 1/25.6 .65 AL Foil 100% <5.6 <1.4 55 V5-3CFB 300m 51 .559 .043 5 512 153 14.2 1.10 V3-4CFB 40 .508 .039 3 328 120 12.9 1.0 V4-4CFB 100m 51 .567 .043 4 -22 .197 FPE .146 AC - #20 .031 TAC >93% <11.3 <3.0 17 75Ω ----- <2.2 79% 984 153 14.4 1.1 -30 5.0 3.7 1/31.5 .80 AL Foil 100% <3.7 <1.0 55 V5-4CFB 300m 64 .634 .047 5 775 192 16.1 1.2 V3-5CFB 64 .673 .051 3 328 192 17.1 1.3 V4-5CFB 100m 80 .740 .051 4 -22 .256 FPE .192 AC - #18 .041 TAC >93% <7.1 <2.1 17 75Ω ----- <2.2 79% 984 240 18.8 1.3 -30 6.5 4.9 1/41.3 1.05 AL Foil 100% <2.4 <0.7 55 V5-5CFB 300m 102 .831 .059 5 1341 306 21.1 1.5 V3-1.5C 16 .291 .032 3 CABC0705-9 11.5 35.5 V4-1.5C 328 21 .331 .039 4 -22 .102 PE .061 AC - #31 .011 >94% <129.2 <10.1 21 75Ω 29.3 <2.2 66% 100m 8.4 1.0 -30 2.6 1.55 7/3.5 .27 <42.4 <3.3 69 9.6 V5-1.5C 24 .362 .039 5 9.2 1.0 V3-3C 33 .453 .036 3 328 66 11.5 0.9 V4-3C 100m 44 .512 .043 4 -22 .173 PE .122 AC - #25 .021 >97% <32.1 <3.7 21 75Ω 15.0 <2.2 66% 656 88 13.0 1.1 -30 4.4 3.1 7/7.09 .54 <10.5 <1.1 67 4.9 V5-3C 200m 53 .559 .043 5 106 14.2 1.1 V3-5C 51 .611 .047 3 328 102 15.5 1.2 V4-5C 100m 66 .674 .047 4 -22 .237 PE .189 AC - #22 .031 >94% <15.5 <3.7 21 75Ω 10.0 <2.2 66% 656 132 17.1 1.2 -30 6.0 4.8 7/10.24 .78 <5.1 <1.2 67 3.4 V5-5C 200m 84 .756 .055 5 168 19.2 1.4 National Order Line: 24 Hour Fax Orderline: West Coast Sales & Service: have@haveinc.com800-999-HAVE (4283) 518-828-2008 661-266-1624 store.haveinc.com
  • 41. 42 Bulk Video Cable Gepco Video Cables Remember, this is just a small representation. We carry the full line of Gepco Featuring precision specifications, comprehensive quality control and Video Cable, including Plenum Mini RGB Snake, Broadband & Distribu- testing, gas-injected foam dielectrics and precision drawn conductors. tion coax, Precision Video coax, 50 Ohm & conventional analog coax cables. Total quality through and through, and in a wide range of application possibilities including SDI and HDTV. Please call for information about Gepco Composite A/V cables! Coax Video Cable Coax Video Cable Single Channel GEPVS 2001 Series Multichannel Gepco hi def SDI Coax is engineered and expanded to feature a 3GHz Great for hi resolution RBG component analog video, as well as bandwidth for HDTV transmission, gas-injected foam polyethylene standard definition serial digital video applications. Thin profile, full dielectric, excellent crush resistance, easy termination, and a flexible riser copper braid and foil shields, and flexible black Gep-Flex jacket! rated jacket. Gepco miniature SDI Coax features exceptionally low- • Return Loss: >23dB /100kHz-1GHz attenuation for its type, while maintaining a reduced size and weight. • Capacitance: 16.3pF/ft. Plus it features broadband foil and braid shielding. • Cond. DCR: 6.4 Ohms/1000’ Great for high def or standard definition serial digital video, high- GEPVS32001 3 ch 18AWG RG6 hi def SDI multichannel video coax resolution analog video, or digital audio (AESid, SPDIF or Word GEPVS42001 4 ch 18AWG RG6 hi def SDI multichannel video coax Clock). GEPVS52001 5 ch 18AWG RG6 hi def SDI multichannel video coax GEPVDM230 23AWG miniature SDI video coax, available in black, blue, brown, gray, green, orange, red, violet, white, & 10 Channel Coax yellow. • Return Loss: >21dB /1GHz-3GHz • Capacitance: Gepcos 10230 is great for high definition or standard definition serial 16.5pF/ft. • Cond. DCR: 20.3 Ohms/1000’ digital video, as well as high resolution RGB analog video. Ideal for GEPVDM250D 25AWG dual miniature SDI video coax, available extended distance runs! 3GHz Bandwidth for HDTV! in black. • Return Loss: >21dB /1GHz-3GHz • Capacitance: 16.5pF/ft. • Cond. DCR: 30.0 Ohms/1000’ The 102000 is great for portable snakes carrying multichannel digital or GEPVPM2000 20AWG RG59 hi def SDI video coax, available in analog video in remote applications. 3GHz HD bandwidth and with black, blue, brown, gray, green, orange, red, violet, white, & broadband shielding! yellow. • Return Loss: >23dB /1GHz-3GHz • Capacitance: GEPVS10230 23AWG mini hi def SDI 10 channel video coax 16.3pF/ft. • Cond. DCR: 10.2 Ohms/1000’ GEPVS102000 20AWG RG59 hi def SDI 10 channel video coax GEPVPM2000TS 20AWG RG59 plenum hi def SDI video coax, available in white. • Return Loss: >21dB /1GHz-3GHz • Capaci- tance: 16.0pF/ft. • Cond. DCR: 10.2 Ohms/1000’ Triax Video Cable GEPVSD2001 18AWG RG6 hi def SDI video coax, available in black, blue, brown, green, orange, red, violet, white, & yellow. Triax • Return Loss: >23dB /1GHz-3GHz • Capacitance: 16.5pF/ft. Gepco triax features a precision drawn copper conductor and a low-loss • Cond. DCR: 6.4 Ohms/1000’ gas-injected polyethylene dielectric for low attenuation, a precise 75- GEPVSD2001TS 18AWG RG6 plenum hi def SDI video coax, available ohm impedance and low structural return loss. in white. • Return Loss: >23dB /1GHz-3GHz • Capacitance: 16.0pF/ft. • Cond. DCR: 6.4 Ohms/1000’ Flexible Gepco triax cable for studio or remote environments. Excellent for digital or analog video camera to CCU interconnects or for portable cables. RGB Series Multichannel Great for Standard Definition Serial Digital Video, High Resolution RGB GEPLVT61811 Extended distance triax 14AWG RG11 stranded Component Analog Video, or for Studio Interconnects, Portable Snakes, conductor, available in black, blue, green, red, & yellow. • Return or permanent installations. Loss: >22dB /1GHz-3GHz • Capacitance: 16.8pF/ft. • Cond. DCR: 2.8 Ohms/1000’ • Return Loss: >21dB /100kHz-1GHz GEPLVT61859 Thin profile triax 20AWG RG59 solid conductor, • Capacitance: 16.5pF/ft. available in black, blue, green, red, yellow, & violet. • Return • Cond. DCR: 30 Ohms/1000’ Loss: >22dB /1GHz-3GHz • Capacitance: 16.3pF/ft. • Cond. GEPRGB250 3 ch 25AWG low loss thin profile mini coax snake DCR: 10.2 Ohms/1000’ GEPRGBS250 4 ch 25AWG low loss thin profile mini coax snake GEPLVT61859S Thin profile triax 21AWG RG59 stranded GEPRGBSC250 5 ch 25AWG low loss thin profile mini coax snake conductor, available in black, blue, & red. • Return Loss: GEPRGBHVC250 6 ch 25AWG low loss thin profile mini coax snake >22dB /1GHz-3GHz • Capacitance: 17.0pF/ft. • Cond. DCR: 14.3 Ohms/1000’ Bulk Gepco cable sold starting at 50’ lengths or in full reels of 1000’ WE ALSO CARRY GEPCO PERMANENT INSTALL TRIAX CABLE! National Order Line: 24 Hour Fax Orderline: West Coast Sales & Service: have@haveinc.com 800-999-HAVE (4283) 518-828-2008 661-266-1624 store.haveinc.com
  • 42. Cable Connectors & Accessories 43 If Bulk Cable is the heart, then Connectors are the front men/ front women in the industry. Like Bowie, Robert Plant, or Janis Joplin, connectors are shiny and up front in their appearance AND performance. We like to think however that connectors are rather more humble than that, and play very nicely with their friends, bulk cable. Connectors are the beautifully crafted, elegant partners to cable that finish ANY equipment connection wonderfully. We carry a virtual PLETHORA of noble high performance connectors. The selection here comprises the most popular series from our featured manufacturers, but please contact our sales department for ANY connector needs! We carry full lines of audio and video connectors and adapters from all the leading industry brands including: NEW! HAVE Locking Bananas CABC0705-9 National Order Line: 24 Hour Fax Orderline: West Coast Sales & Service: have@haveinc.com800-999-HAVE (4283) 518-828-2008 661-266-1624 store.haveinc.com
  • 43. 44 NEUTRIK® Audio Connectors NOTE: Add NEU- prefix to all Neutrik parts when ordering XLR Cable Connectors NEW - Neutrik XX Series X Series The next generation of the worldwide accepted standard X Series is This series has become the accepted worldwide standard for XLR cable here! New Unique style diecast shell, with internal threads and new connectors. The compact design offers the shortest XLR cable version in the female cage type contacts that increase conductivity and reduce industry. The female features an insert which is completely surrounded by wear between cable and chassis connectors! 3-pin configurations metal for added protection and the shell has a rubber ring for secure mating are all available now! XX SeriesM to a male XLR or microphone. Assembly is quick and easy with no screws # of Nickel Shell Black Chrome Shell Black Chrome Shell Contacts Silver Contacts Silver Contacts Gold Contacts to worry about and includes the unique Neutrik chuck type strain relief. 3 (Male) NC3MXX NC3MXX-BAG NC3MXX-B 3** (Male) NC3MXX-D NC3MXX-BAG-D NC3MXX-B-D X Series MaleM # of Nickel Shell Black Chrome Shell Black Chrome Shell Contacts Silver Contacts Silver Contacts Gold Contacts 3 (Female) NC3FXX NC3FXX-BAG NC3FXX-B 3 NC3MX-CC NEW DIGITAL XLR 3**(Female) NC3FXX-D NC3FXX-BAG-D NC3FXX-B-D 3 NC3MX NC3MX-BAG NC3MX-B 3** NC3MX-D NC3MX-BAG-D NC3MX-B-D 4 NC4MX NC4MX-BAG NC4MX-B RC Series 5 NC5MX NC5MX-BAG NC5MX-B 6 NC6MX NC6MX-BAG NC6MX-B 6* NC6MXS NC6MXS-BAG NC6MXS-B 7 NC7MX NC7MX-BAG NC7MX-B NEW - NC3FX-CC Digital XLR, ideal for These compact, low profile, right angle cable connectors are de- audio digital signal according to AES3! signed to select any of 7x45º positions by rotating the assembled insert into various indents before securing back cover. X Series FemaleM # of Nickel Shell Black Chrome Shell Black Chrome Shell Contacts Silver Contacts Silver Contacts Gold Contacts RC Series MaleM # of Nickel Shell Black Chrome Shell Black Chrome Shell Contacts Silver Contacts Silver Contacts Gold Contacts 3 NC3FX-CC NEW DIGITAL XLR 3 NC3MRC NC3MRC-BAG NC3MRC-B 3 NC3FX NC3FX-BAG NC3FX-B 4 NC4MRC NC4MRC-BAG NC4MRC-B 3** NC3FX-D NC3FX-BAG-D NC3FX-B-D 5 NC5MRC NC5MRC-BAG NC5MRC-B 4 NC4FX NC4FX-BAG NC4FX-B 6 NC6MRC NC6MRC-BAG NC6MRC-B 5 NC5FX NC5FX-BAG NC5FX-B RC Series FemaleM 6 NC6FX NC6FX-BAG NC6FX-B # of Contacts Nickel Shell Silver Contacts Black Chrome Shell Silver Contacts Black Chrome Shell Gold Contacts 6* NC6FXS NC6FXS-BAG NC6FXS-B 3 NC3FRC NC3FRC-BAG NC3FRC-B 7 NC7FX NC7FX-BAG NC7FX-B 4 NC4FRC NC4FRC-BAG NC4FRC-B Accessories include BSX boots and XCR labelling rings for 5 NC5FRC NC5FRC-BAG NC5FRC-B color coding identification, available in ten colors (see page 45)! 6 NC6FRC NC6FRC-BAG NC6FRC-B ** Bulk packaged available in 3 pin only * Switchcraft equivalent Featured Product - EasyCon Series XLR Connectors EasyCon Series The perfect connector for fast "on location" termination! EasyCon Series M/FM Connector Black Chrome Shell Nickel Shell Type Gold Contacts Gold Contacts Male IDC NC3MEZY-B NC3MEZY-AU Male Solder NC3MEZ-B NC3MEZ-AU Available with either IDC or solder contacts, EasyCon is made of Female IDC NC3FEZY-B NC3FEZY-AU only three pieces! There is no set screw or additional parts to drop Female Solder NC3FEZ-B NC3FEZ-AU or lose, making these connectors the fastest way to terminate a cable with an XLR connector on the market today. The IDC version All parts available bulk packaged. Add "-D" to part number of the EasyCon series uses gold tuning fork contacts. BSZ replaceable rubber boots available in ten colors (see pg 3) National Order Line: 24 Hour Fax Orderline: West Coast Sales & Service: have@haveinc.com 800-999-HAVE (4283) 518-828-2008 661-266-1624 store.haveinc.com
  • 44. NEUTRIK® Audio Connectors 45 NOTE: Add NEU- prefix to all Neutrik parts when ordering XLR Receptacles D-L-1 Series A/B Series This series features a one piece unit with solder cup terminations, male & The smallest XLR panel receptacles available today, the A/B series female fit in the same hole cut out, and are front or rear mountable. RF is extremely cost effective and space saving when receptacles are protected via 3pt coaxial ground contact to shell of the mated connector. mounted side by side. Provides 0.90" center to center. The Accessories include rubber dust covers and DBA blank plastic plate. females feature a revolutionary patented tuning fork contact design and choice of chassis grounding. Hard gold contacts are D-L-1 Series MaleM # of Nickel Shell Black Chrome Shell Black Chrome Shell standard on both the male and female. Available in a variety of Contacts Silver Contacts Silver Contacts Gold Contacts 3 NC3MD-L-1 NC3MD-L-1-BAG NC3MD-L-1-B PC mount versions. An IDC version is also available. 4 NC4MD-L-1 NC4MD-L-1-BAG NC4MD-L-1-B The "A" series is made of a high impact glass reinforced UL94V-0 5 NC5MD-L-1 NC5MD-L-1-BAG NC5MD-L-1-B plastic. The "B" series features a metal (nickel or black chrome) mounting flange which enables continuous circumferential 6 NC6MD-L-1 NC6MD-L-1-BAG NC6MD-L1-B chassis ground contact for complete EMC and RF protection. 6* NC6MDS-L-1 N/A NC6MDS-L-1-B AB Series MaleM Gold Contact Plastic Shell with Shell with 7 NC7MD-L-1 N/A NC7MD-L-1-B Termination Shell Nickel Ring Black Chrome Ring PCB Mount Horizontal NC3MAH NC3MBH NC3MBH-B D-L-1 Series FemaleM # of Nickel Shell Black Chrome Shell Black Chrome Shell PCB Mount Horiz. Contacts Silver Contacts Silver Contacts Gold Contacts Lateral Right NC3MAHR NC3MBHR NC3MBHR-B 3 NC3FD-L-1 NC3FD-L-1-BAG NC3FD-L-1-B PCB Mount Horiz. NC3MAHL NC3MBHL NC3MBHL-B Lateral Left 3 NC3FD-L-1-0 NC3FD-L-1-BAG-0 N/A PCB Mount NC3MAV NC3MBV NC3MBV-B Vertical 4 NC4FD-L-1 NC4FD-L-1-BAG NC4FD-L-1-B IDC NC3MAY NC3MBY NC3MBY-B 5 NC5FD-L-1 NC5FD-L-1-BAG NC5FD-L-1-B A/B Series FemaleM Gold Contact Plastic Shell with Shell with Black Ground 6 NC6FD-L-1 NC6FD-L-1-BAG NC6FD-L-1-B Termination Shell Nickel Ring Chrome Ring PCB Mount NC3FAH-1 NC3FBH-1 NC3FBH-1-B Pin one & ground together 6* NC6FDS-L-1 N/A NC6FDS-L-1-B Horizontal NC3FAH-2 NC3FBH-2 NC3FBH-2-B Pin one & ground seperate PCB Mount Horiz. NC3FAHR-1 NC3FBHR-1 NC3FBHR-1-B Pin one & ground together 7 NC7FD-L-1 N/A NC7FD-L-1-B Lateral Right NC3FAHR-2 NC3FBHR-2 NC3FBHR-2-B Pin one & ground seperate PCB Mount Horiz. NC3FAHL-1 NC3FBHL-1 NC3FBHL-1-B Pin one & ground together Lateral Left N/A N/A N/A Pin one & ground seperate DSS color coded labelling plates available in ten colors! (see below) PCB Mount NC3FAV-1 NC3FBV-1 NC3FBV-1-B Pin one & ground together * Switchcraft equivalent Vertical NC3FAV-2 NC3FBV-2 NC3FBV-2-B Pin one & ground seperate P Series IDC NC3FAY NC3FBHY NC3FBY-B No special ground feature Accessories include ACRF and ACRM color coded rings for identification, available in nine colors! (see below). A/B Series also available in 4 and 5 pin, please call. Color Coded Accessories Neutrik offers color coded accessories for easy identification and match up for a variety of their connectors. Available in ten resistor One piece metal shell panel receptacle with large solder cups. The colors, these accessories can be used on standard 1/4" plugs or "P" Series is front mountable only and has a non-removable insert. Neutricon® connectors (BSP); X series connectors (BSX and XCR); D series, 1/4" locking jack, and NL4MP connectors (DSS); TT size single plugs (BSTP); and now Neutriks A/B series and XLR receptacles. P Series MaleM # of Nickel Shell Black Chrome Shell Black Chrome Shell Contacts Silver Contacts Silver Contacts Gold Contacts 3 NC3MP NC3MP-BAG NC3MP-B Color Coded AccessoriesM Part Description Colors Available Number (white-gray-violet-blue-green-yellow-orange-red-brown-black) 4 NC4MP NC4MP-BAG NC4MP-B BSTP-Color Sleeves for NP3TT-P -WT -GR -V -BL -GN -Y -O -R -BR -BLK CABC0705-9 Bantam size plugs 5 NC5MP NC5MP-BAG NC5MP-B DSS-Color Labelling Plates for D -WT -GR -V -BL -GN -Y -O -R -BR -BLK Series receptacles 6 NC6MP NC6MP-BAG NC6MP-B XCR-Color Ring with flat label -WT -GR -V -BL -GN -Y -O -R -BR -BLK surface for X Series BSE-Color Boots for EtherCon -WT -GR -V -BL -GN -Y -O -R -BR -BLK K Series FemaleM # of Nickel Shell Black Chrome Shell Black Chrome Shell connectors Contacts Silver Contacts Silver Contacts Gold Contacts BSX-Color Boots for X Series -WT -GR -V -BL -GN -Y -O -R -BR -BLK 3 NC3FP-1 NC3FP-1-BAG NC3FP-1-B connectors BSP-Color Boots for all 1/4" -WT -GR -V -BL -GN -Y -O -R -BR -BLK 4 NC4FP-1 NC4FP-1-BAG NC4FP-1-B plugs & Neutricon® Ring for female A/B ACRF-Color** Series receptacles -WT -GR -V -BL -GN -Y -O -R -BR N/A 5 NC5FP-1 NC5FP-1-BAG NC5FP-1-B ACRM-Color Ring for male A/B -WT -GR -V -BL -GN -Y -O -R -BR N/A 6 NC6FP-1 NC6FP-1-BAG NC6FP-1-B Series receptacles LCR-Color Ring for -WT N/A N/A N/A -GN -Y N/A -R N/A N/A 6* NC6FPS-1 NC6FPS-1-BAG Speakon SPX ** also for EtherCon receptacles 7 NC7FP-1 N/A NC7FP-1-B * Switchcraft equivalent National Order Line: 24 Hour Fax Orderline: West Coast Sales & Service: have@haveinc.com800-999-HAVE (4283) 518-828-2008 661-266-1624 store.haveinc.com
  • 45. 46 NEUTRIK® Audio Connectors NOTE: Add NEU- prefix to all Neutrik parts when ordering Jacks & Plugs NP3TT Series NP*C Series These Bantam size miniature stereo plugs have recently been rede- signed to be crimped with any standard RG58 crimp tool for coax These 1/4" professional phone plugs are available in mono (2 cables. The gold contact version when used with Neutriks NJ3TT/2 contacts/TS) or stereo (3 contacts/TRS). Features include a diecast jacks eliminates mating problems due to corrosion or dirt. metal shell and unique Neutrik chuck type strain relief. Straight and right angle versions available. NP3TT SeriesM # of Plastic Sleeve Plastic Sleeve Color Contacts Contacts Silver Contacts Gold Contacts Sleeve The NP*RCS is a slim right angle version of Neutriks standard (NP*C) 3 NP3TT-P-B NP3TT-P-B-AU Black TRS 1/4" professional phone plug featuring a narrow profile and a 3 NP3TT-P-R NP3TT-P-R-AU Red TRS solderless ground wire. 3 NP3TT-2 N/A Black TRS Mono (TS) 1/4" PlugsM # of Nickel Shell Black Chrome Shell Black Chrome Shell Contacts Silver Contacts Silver Contacts Gold Contacts BTSP boots for color coding identification available in ten colors! (see pg 3) 2 NP2C NP2C-BAG NP2C-B 2 N/A NP2C-BAG-D* N/A NJ3FC6 Series 2* NP2C-T10AA NP2C-T10AA-BAG N/A 2 NP2L NP2L-BAG N/A 2 NP2RC NP2RC-BAG N/A 2 NP2RCS N/A N/A BSP boots for color coding identification available in ten colors! (see pg 3) NP2C-T10AA W/1:10 transformer to convert mic level to guitar inputs This series features a securely locking 1/4" jack with latch release. * Bulk packaged - must be ordered in multiples of 500 Mates with all mono or stereo plugs specified to EIA RS-435. Able to handle cable OD up to 8mm Stereo (TRS) 1/4" PlugsM # of Nickel Shell Black Chrome Shell Contacts Silver Contacts Silver Contacts NJ3FC6M # of Nickel Shell Black Chrome Shell Contacts 3 NP3C NP3C-BAG Contacts Silver Contacts Silver Contacts 3 NP3C-D* NP3C-BAG-D* 3 NJ3FC6 NJ3FC6-BAG TRS 3 NP3RC NP3RC-BAG 3 NP3RCS N/A BSP boots for color coding identification available in ten colors! (see pg 3) HAVE is a full-line distributor of Neutrik & * Bulk packaged - must be ordered in multiples of 500 Rean products. This catalog features Neutriks newest and most popular products. If you dont see it here, please contact our sales department! Military Gauge Series NJ3FP6C Series Neutrik offers a variety of plug fingers to meet most mil spec applications. All versions feature a metal shell in black or red and unique Neutrik chuck type strain relief. Assembly is quick with no rivets or screws to worry about. This series of panel mount 1/4" locking jacks with solder terminations Military Gauge SeriesM # of Coated Brass Shell Mil. Spec Contacts Silver Contacts Gauge Diameter is made to mount in the same hole cutout as Neutriks "D" and NL4MP 3-TRS NP3TB-B or -R BPO 316 .250" series of panel mounts. Options include a plastic shell and FastOn® solder tabs versions. 3-TRS NP3TM-B or -R 642/2 .250" # of Nickel Black Cr Shell Plastic Shell NJ3FP6C 2-TS NP2CM-B or -R# 642/4 .250" Contacts Silver Contacts Silver Contacts Silver Contacts Contacts 3-TRS NP3CM-B or -R# 642/5A .206" 3 NJ3FP6C NJ3FP6C-BAG NJ3FP6C-P TRS National Order Line: 24 Hour Fax Orderline: West Coast Sales & Service: have@haveinc.com 800-999-HAVE (4283) 518-828-2008 661-266-1624 store.haveinc.com
  • 46. NEUTRIK® Audio Connectors 47 NOTE: Add NEU- prefix to all Neutrik parts when ordering Product Product Spotlight Spotlight NEW ! NEW! NYS373 Neutriks brand new Tiny Plug is the perfect product for NYS373 RCA plug, professional applications with 3.5 mm stereo plugs, like Mic black chrome shell & color connections on video cameras, wireless headsets, etc. It offers coding ring. RCA connector a slim, space saving all metal design either in nickel or black with chuck cable retention principle, chrome and excellent cable retention values using a chuck type gold plated contacts and black strain relief for cables from 2 - 4.5mm. chrome shell. Packed with two cable protection springs for cables from 3 to 5 Heavy duty right angle, slim profile mm & from 5.1 to 6.1 mm. Metal Shell for durability and harsh environments Chuck strain relief • Oversized solder terminals Your choice of color coding rings: Black, Red, Yellow or White Jacks & Plugs NYS Series - Quality & Economy NYS352 NYS224 NYS215 NYS229 NYS220 NYS322 Neutriks Rean NYS series connectors are designed and manufactured to their high technical standards. Manufactured in various facilities, their competitive cost and excellent performance provide the ideal solution for your audio application requirements. When your budget requires savings, but don’t want to lower your performance and reliability This is just a small representation of Neutrik’s Rean NYS Series! specifications, choose Neutrik NYS! Contact our sales department for the full range of products! • Broad range of connector choices. • Commercial grade construction • Great choice for any permanent studio and sound installations NYS322 5 pin DIN male, cable mount w/cable clamp, metal NYS218 Stereo 1/4" right angle PCB mount female with nut/ housing (3 & 7 pin available) washer (.492") NYS325 5 pin DIN female chassis mount (3 & 7 pin available) NYS218/2 Stereo 1/4" right angle PCB mount female with nut/ NYS352 RCA phono male, w/cable clamp, large cable access washer (.590") NYS354 Right angle PCB phono female NYS224 2 conductor phone male, solder terminals CABC0705-9 NYS355 Phono female to phono female in-line adapter NYS224L 2 conductor phone male, solder terminals, large cable access NYS201 Mono phone male, solder terminal, shielded short handle NYS228 3 conductor phone male, solder terminals, shielded handle (NYS202 = stereo version) NYS229 1/4" phone female, 2 conductor w/insulated washer, NYS204 Stereo phone male, solder terminal, black plastic handle, solder lugs strain relief NYS229 1/4" phone female, 3 conductor w/insulated washer, NYS212 Stereo 1/4" right angle female, contacts switched, with solder lugs nut/washer* NYS230 3 conductor 1/4" phone female, solder lugs, w/insulated NYS216 Stereo right angle PCB mount female, contacts switched, washer plastic nut/washer* NYS231 3.5mm stereo mini phone male, metal handle, heavy duty NYS215 Stereo 1/4" right angle PCB mount female, contacts NYS220 2 conductor 1/4" thick panel female, solder lugs w/strain switched, chrome nut/washer relief clamp (NYS221 = 3 conductor version) * 2 conductor mono version available National Order Line: 24 Hour Fax Orderline: West Coast Sales & Service: have@haveinc.com800-999-HAVE (4283) 518-828-2008 661-266-1624 store.haveinc.com
  • 47. 48 NEUTRIK® Audio Connectors NOTE: Add NEU- prefix to all Neutrik parts when ordering Speakon® Series Lockable Loudspeaker/Amplifier Connectors SPX Series - 4 Pole High Current Easier & STX Series - 4 Pole Metal Shell Faster! NEW ! Neutrik’s NEW SPX Series Speakon connectors feature easier and Neutrik’s NEW STX Series Speakon is the next generation 4 pole faster assembly. Only 3 pieces, with a redesigned insert that connector for loudspeaker and amplifier applications in harsh doesn’t require any special tools. And a new 1-piece strain relief and demanding environments. Touring professionals will that accepts a wide variety of cable diameters. PLUS a conver- appreciate STX features like extremely rugged and durable metal sion kit is available which allows a straight connector to be housing, and built in gaskets to make connectors weatherproof. made right angle WITHOUT disconnecting the cable! PLUS a higher current rating for usage with high-powered speakers and STX SeriesM Model Description amplifiers. Now handles 50 amps! NLT4MX 4 pole cable connector nickel SPX SeriesM Model Description NLT4MXBAG 4 pole cable connector silver NL4FX 4 pole - straight boot* NLT4FP 4 pole female chassis connector NL4FRX 4 pole - right angle boot* NLT4FPBAG 4 pole female chassis connector silver LRX Conversion kit - converts NL4FX to NL4FRX* NLT4MP 4 pole cable male chassis connector NL4MMX Locking Cable to Cable adapter for extended runs NLT4FX 4 pole female cable connector Speakon Connectors & Accessories The Industry Standard! 2-Pole 4-Pole 8-Pole This series of professional speaker and amplifier connectors is SpeakOn panel receptacles with solder terminations also allow recognized as the industry standard. The SpeakOn product line you to use quick disconnect type terminals for ease and reliability now comes in 2, 4, and 8 contact versions. of assembly. PCB vertical and horizontal terminations are also available as is a non air-tight version for amplifier use. Patent Protected, reliable, cost effective, and extremely durable, the SpeakOn system offers the "quick lock" locking system and recently The contacts in this series are touch proof and designed to prevent redesigned inserts on its cable ends. The inserts feature solderless damage from arcing if disconnected under load. Ensuring fail safe connectors using screw type terminals with a captivated pressure plate. conditions for both the equipment and the operator, SpeakOn meets No special tools are required making these connectors 100% field the prevailing safety standards of IEC65, IEC348, CE, CSA, and are UL repairable. rated. Speakon SeriesM Description 2 Pole 4 Pole 8 Pole Cable connector, quickload latch or ring NL2FC NL4FC NL8FC Above, with gold plated contact N/A NL4FC-B N/A Drip boot for NL4FC N/A BSL-WR N/A Chassis connector, air tight, solder terminations NL2MP NL4MP NL8MPR Above, with gold plated contact N/A NL4MP-B N/A See our HAVEFlex NL4MP 40 Amp version with 1/4" FASTON N/A NL4MP-UC N/A Speaker cables made with Speakon NL4MP with screw terminals N/A NL4MP-ST N/A connectors on page 3! Chassis conn., air tight, round flange, solder termination N/A NL4MPR N/A NL8MPR with black chrome metal face N/A N/A NL8MPR-BAG Vertical PCB version, air tight, square flange NL2MD-V NL4MD-V NL8MD-V Vertical PCB version, air tight, round flange N/A NL4MPR-V N/A Horizontal PCB version, air tight NL2MD-H NL4MD-H N/A Coupler for linking (extending) cables N/A NL4MMX NL8MM Adapter to 1/4" 2 pole jack (same dimension as NL4FC) N/A NA4LJ N/A National Order Line: 24 Hour Fax Orderline: West Coast Sales & Service: have@haveinc.com 800-999-HAVE (4283) 518-828-2008 661-266-1624 store.haveinc.com
  • 48. Audio Connectors & Transformers 49 Audio Connectors 110Ω - 75Ω Impedance Transformer Audio Line Plugs In-Line & Panel Mount Transformers CANF-9 CANF-10 CANF-11 RCA male, narrow profile, RCA male, deluxe, Mini phone male, gold plated contacts gold plated contacts 2 cond. T/S BCJ-XJ-TRB BCJ-XJ-A10TRA BCJ-XP-TRB Canare transformers convert 2-channel digital audio signals between balanced XLR connectors and unbalanced 75 ohm BNC connectors. CANF-12 CANF-15 CANF-16 They allow switching from limited length microphone cable to a longer, Mini Phone male, Standard 1/4" phone male Standard 1/4" phone male impedance matched 75 ohm coax cable. Route D1, D2, R-DAT and 3 cond. T/R/S 2 cond. T/S 3 cond. T/R/S DAW signals via 75 ohm CANARE video patchbays, BNC plugs and coaxial cable. Canare offers in-line cable mount audio plugs in a variety of configurations for the discriminating professional. Each model is carefully designed with In-Line a .29" cable access to accomodate small to large O.D. cables. All versions CANBCJXPTRB BNC to XLR Male (In-Line) offer a generous soldering area for easy wiring assembly, good electro- CANBCJXJTRB BNC to XLR Female (In-Line) mechanical characteristics, super performance, and long life durability. CANBCJXJA10TR BNC to XLR Female (In-Line) Just hold one in your hand and youll know that these are among the best made connectors in the world! Panel Mount CANBCJTRBXP3F BNC front, XLR Female back (Panel Mount*) Gold Plated Brass Inner Shaft CANBCJTRBXP3M BNC front, XLR Male back (Panel Mount*) Offers low contact resistance and eliminates CANBCJA10TRAXP3F BNC front, XLR Female back (Panel Mount*) corrosion problems with the mating receptacle CANXJ3MTRBBCJ XLR Male front, BNC back (Panel Mount*) Proprietary 360° Cable Clamp CANXJ3FTRBBCJ XLR Female front, BNC back (Panel Mount*) Ensures long life reliability CANXJ3FA10TRABCJ XLR Female front, BNC back (Panel Mount*) *Panel mount transformers fit all Canare bulkhead receptacles (see page 54). Canare is Nickel Plated Bell Brass Handle Beautiful satin finish has specially designed Design Excellence! Shop online! knurled surface to prevent finger slippage Spring Type Strain Relief Helps prevent damage due to repeated bending store.haveinc.com at connector entry point; cable lasts three times longer than plugs without strain relief. (F-10 Shown) Audio ConnectorsM Model Type Notes Cable Max. Cable Shaft Dielectric Body Insulation Cable Entry I.D. O.D. Material Material Tube Spring in. in. Plating Plating Plating (mm) (mm) F-09 RCA Narrow profile .248 .236 Brass Polyacetal Brass _ Nickel Body extends over contact 6.3 6.0 Gold Nickel F-10 RCA Deluxe clamp and body design .244 .236 Brass PTFE Brass Black PVC Nickel 6.2 6.0 Gold Nickel CABC0705-9 F-11 Mini PhoneTS Tip, Sleeve .244 .236 Gold _ Brass _ Nickel 6.2 6.0 Nickel Nickel F-12 Mini Phone Tip, Ring, Sleeve .248 .236 Gold _ Brass Black PVC Nickel TRS 6.3 6.0 Nickel Nickel F-15 1/4" TS Phone Tip, Sleeve .244 .236 Gold _ Brass Black PVC Nickel 6.2 6.0 Nickel Nickel F-16 1/4" TRS Tip, Ring, Sleeve .244 .236 Gold _ Brass Black PVC Nickel Phone 6.2 6.0 Nickel Nickel TransformersM Model Type Bandwidth Voltage VSWR Insertion Max. Loss BCJ-XP-TRB 110Ω side - XLR (3 pin, male) 75Ω side - BNC receptacle jack 0.1 ~ 6MHz 5V p-p Less than 1.1 (0.1 ~ 6MHz) Less than 0.3 dB BCJ-XJ-TRB 110Ω side - XLR (3 pin, female) 75Ω side - BNC receptacle jack 0.1 ~ 6MHz 5V p-p Less than 1.1 (0.1 ~ 6MHz) Less than 0.3 dB BCJ-XJ-A10TR 110Ω side - XLR (3 pin, female) 75Ω side - BNC receptacle jack 0.1 ~ 6MHz 1V p-p Less than 1.1 (0.1 ~ 6MHz) Less than 0.3 dB National Order Line: 24 Hour Fax Orderline: West Coast Sales & Service: have@haveinc.com800-999-HAVE (4283) 518-828-2008 661-266-1624 store.haveinc.com
  • 49. 50 Multipin Connectors ITT Cannon Multipin Connectors 24 Channel DL Zero Insertion Force Connector ITT Cannon - Known for High Quality! For up to 16 channel balanced or 24 channel unbalanced. Unparalleled for applications demanding high pin-counts and long CANMS3106B32A10S DDK 24ch round multipin female cable end life. Typically used for diagnostic equipment and instrumentation CANMS3102A32A10P DDK 24ch round multipin male panel equipment in medical, computer, and avionics industries. Rated up mount to 100,000 cycles. ----------------------------------------------------------- ---------------------------------------------------------- 32 Channel DL2-96P 96 pin male cable mount DL2-96R 96 pin female panel mount receptacle DL2HANDLE Handle ----------------------------------------------------------- ---------------------------------------------------------- 8 & 12 Channel For up to 24 channel balanced or 32 channel unbalanced. CANMS3106B3673S DDK 32ch round multipin female cable end CANMS3102A3673P DDK 32ch round multipin male cable end For up to 8 channel balanced or 12 channel unbalanced snakes. CANNK27-21C34 Cannon round 27 pin female cable end 3/4 CANNK27-22C34 Cannon round 27 pin male cable end 3/4 CANNK27-32S Cannon round 27 pin female panel mount CANNK27-31S Cannon round 27 pin male panel mount ----------------------------------------------------------- ---------------------------------------------------------- 16 Channel & DT12 Product Spotlight NEW! Amphenol ¼” Male connectors For up to 12 channel balanced, 16 channel unbalanced, or 12 channel individual ground. Amphenol makes very high quality connectors, period. We are featuring these great ¼” male phone connectors as total quality, CANFK37-21C58 Cannon round 37 pin female cable end 5/8 economical alternatives. Give’em a try! They LOOK great too! CANFK37-21C78 Cannon round 37 pin female cable end 7/8 • Diecast satin or black metal construction CANFK37-22C58 Cannon round 37 pin male cable end 5/8 • Silver or Gold contacts CANFK37-22C78 Cannon round 37 pin male cable end 7/8 CANFK37-31S Cannon round 37 pin female panel mount AMPACPMGN ¼” TS Mono Male Silver Contacts CANFK37-32S Cannon round 37 pin male panel mount AMPACPSGN ¼” TRS Stereo Male Silver Contacts AMPACPMGNAU ¼” TS Mono Male Silver, Gold Contacts AMPACPSGNAU ¼” TRS Stereo Male Silver, Gold Contacts Shop online! AMPACPMGBAU AMPACPSGBAU ¼” TS Mono Male Black, Gold Contacts ¼” TRS Stereo Male Black, Gold Contacts store.haveinc.com National Order Line: 24 Hour Fax Orderline: West Coast Sales & Service: have@haveinc.com 800-999-HAVE (4283) 518-828-2008 661-266-1624 store.haveinc.com
  • 50. Multipin Connectors 51 D-Sub Connectors EDAC Multipin Connectors You can buy our professional quality D-Sub connectors as separates or as kits that include the connector, solder pins and hood. (The separate connectors include pins.) • Heavy duty metal connector, with machined pins • All metal durable and rugged hoods • Kits come with connector, pins, hood and captive screws D-Sub 9 Pin EDAC multi pin connectors are great as all-in-one alternatives to multiple ¼” or XLR terminations. Used in snakes or junction boxes, to provide simple and FAST connects and disconnects. One EDAC 120 pin can take the place of up to 40 XLR’s and only take up 2 ¾” of width space. Male and Female EDAC connectors use unisex pins (either crimp 409709MS D-Sub 9 pin solder connector male body or solder). Alignment is ensured by keyways, and connectors lock 409709FS D-Sub 9 pin solder connector female body down on each other with actuating screw and lock nut that 409709HM D-Sub 9 metal hood protect both the connector and the contact pins. 409709MSH D-Sub 9 pin high density male with hood 409709FSH D-Sub 9 pin high density female with hood Hoods are also available for connecting to a cable end, providing ----------------------------------------------------------- ---------------------------------------------------------- excellent strain relief and protection from interference. (Panel D-Sub 15 Pin mounting EDACS do not require hoods.) E038PNF EDAC 38 pin female with locking nut E038PNM EDAC 38 pin male with locking nut E038PSF EDAC 38 pin female with actuating screw E038PSM EDAC 38 pin male with actuating screw E038PH EDAC 38 pin metal hood 409515HDM D-Sub 15 pin high density male body E056PNF EDAC 56 pin female with locking nut 409515HDS D-Sub 15 pin high density female body E056PNM EDAC 56 pin male with locking nut 409515HD D-Sub 15 metal hood E056PSF EDAC 56 pin female with actuating screw 409515HDMH D-Sub 15 pin high density male with hood E056PSM EDAC 56 pin male with actuating screw 409515HDSH D-Sub 15 pin high density female with hood E056PH EDAC 56 pin metal hood ----------------------------------------------------------- ---------------------------------------------------------- D-Sub 25 Pin E090PNF EDAC 90 pin female with locking nut E090PNM EDAC 90 pin male with locking nut E090PSF EDAC 90 pin female with actuating screw E090PSM EDAC 90 pin male with actuating screw E090PH EDAC 90 pin metal hood E120PNF EDAC 120 pin female with locking nut E120PNM EDAC 120 pin male with locking nut E120PSF EDAC 120 pin female with actuating screw 409725MS D-Sub 25 pin solder connector male body E120PSM EDAC 120 pin male with actuating screw 409725FS D-Sub 25 pin solder connector female body E120PH EDAC 120 pin metal hood 409725HM D-Sub 25 metal hood 409725MSH D-Sub 25 pin high density male with hood 409725FSH D-Sub 25 pin high density female with hood 3 Pin Connectors ----------------------------------------------------------- ---------------------------------------------------------- EDAC 3 pin connectors are commonly used on audio patchbays from ADC, AVP, Audio Accessories and others. Unisex crimp or D-Sub 37 Pin solder pins insert into either the female or male connector. CABC0705-9 E03J EDAC 3 pin female E03P EDAC 3 pin male EDAC Pins Connectors Your choice of Solder or Crimp style. Don’t forget to order the 409737MSH D-Sub 37 pin solder connector male with hood Crimp Tool, and Insertion Tool on page 82. 409737FSH D-Sub 37 pin solder connector female with hood EPINS EDAC crimp pins 24 AWG EPINSS EDAC solder pins 24 AWG National Order Line: 24 Hour Fax Orderline: West Coast Sales & Service: have@haveinc.com800-999-HAVE (4283) 518-828-2008 661-266-1624 store.haveinc.com
  • 51. 52 Audio Connectors/Adapters Audio Connectors Speaker Connectors We carry a huge variety of audio connectors and adapters, all with Quality and ECONOMY in mind for you. Mini 3.5mm, Phono RCA, Phone 1/4", banana, spade lugs, audiopins, or combination adapters in tons of configurations, you name it, HAVE HAS IT. • Quality construction, metal or molded NEW! • Designed for demanding applications, DURABLE • Crimp or Solder HAVBANANA** TRUGBA002 SPADE90 AUDIOPIN • Cable end or Chassis mount • ECONOMICAL to save your budget HAVBANANA6MM HAVE locking banana plug 6MM • Our most popular connectors featured here. Call for more options! HAVBANANA8MM HAVE locking banana plug 8MM • Audiophile quality audiopins, spades, and our own locking bananas TRUEGBA002 Compression type banana plugs SPADEHDS3 Gold spade lugs, 8MM opening, 6 AWG Mini (3.5mm) SPADEHDS5 Gold spade lugs, 1/4" opening, 10/12 AWG SPADE90BLA 90 Degree spade lugs, 1/8" opening, black SPADE90RED 90 Degree spade lugs, 1/8" opening, red AUDIOPIN Gold audiopins, red & black id rings (sold in pairs) Our new HAVE Locking Bananas are high performance, 143001 143005 143004 143003 Audiophile quality. We use them in all of our HAVEFlex Banana speaker cables! See our New Product page! 14-3001 Mini plug, cable end 14-3003 14-3004 Mini jack, chassis mount Mini plug, stereo cable end Audio Adapters 14-3005 Mini jack stereo cable end Adapters RCA (Phono) 151013 151005 151012 151007 151010 151018 141001 141002 141003 141003FF 14-1001 RCA plug, cable end 14-1002 RCA jack, cable end 14-1003 RCA jack, chassis mount solder lug 14-1003FF RCA jack to phono jack chassis mount 151021 151020 151018 151017 151019 151011 15-1001 Mini plug to RCA jack 15-1002 Mini plug to 1/4” jack 1/4” (Phone) 15-1003 RCA plug to mini jack 15-1005 1/4” plug to mini jack 15-1006 1/4” plug to RCA jack 15-1007 1/4” jack to 1/4” jack 15-1008 RCA plug to 1/4” jack 15-1010 RCA jack to RCA jack 142001 142004 142002 15-1011 Mini jack to sub-mini plug 15-1012 Stereo 1/4” jack to 1/4” mini plug 15-1013 Mini plug to 1/4” mini jack 14-2001 Standard 1/4" phone plug, cable end 15-1015 Stereo mini jack to stereo 1/4” plug 14-2002 Standard 1/4" phone jack, chassis mount 15-1017 Stereo 1/4” jack to mono 1/4” plug 14-2003 Standard 1/4" phone jack, cable end 15-1018 Stereo mini jack to 1/4” plug 14-2004 Stereo phone plug, cable end with spring-type 15-1019 1/4" stereo 1/4” jack to mono mini plug strain relief 15-1020 Mini jack mono to 1/4” plug 14-2008 Stereo phone jack, chassis mount 15-1021 Mini jack to 1/4” plug - stereo National Order Line: 24 Hour Fax Orderline: West Coast Sales & Service: have@haveinc.com 800-999-HAVE (4283) 518-828-2008 661-266-1624 store.haveinc.com
  • 52. Multi-Pin & Triax Connectors 53 Multi-Pin Connectors Triax Connectors 75Ω Multi-Pin Coax Connectors Tri-KPro Connectors Compatible with Single Connector Kings triax, but for V5-3C costs much less! 5 Channel Cable! Canares 75Ω Multi-Pin connectors feature five modular "Snap n Canares innovative approach to the broadcast market takes triaxial Lock" pins and sockets, are easy to assemble (in the shop or in the interconnects to new heights. The Tri-FPro features a superior design field), require no soldering, and have color coded channel IDs. Uses that insures long lasting performance regardless of extreme environ- standard Canare crimp tools and strippers, and is great for: mental conditions. Easy termination requires no additional tooling, • RGB-HV Snake Systems features a push-lock mechanism, and is compatible for series 5 and • Digital Video Projectors series 10 cables. The Tri-FPro cable compatibility meets North and • SDI Tie Lines South American interconnecting strategy needs. • OB Vans • A/V Multimedia Installers CANCCM4-PK Male cable mount* CANCCF4-JK Female cable mount* CANMCFV5C3 Female bulkhead receptacle. CANCCM4-PKR Male panel mount CANMCMV5C3 Male cable mount. CANCCF4-JKR Female panel mount ----------------------------------------------------------- ---------------------------------------------------------- ----------------------------------------------------------- ---------------------------------------------------------- 75Ω Multi-Pin Replacement Units NEW - Boots & Dust Caps for Tri-K Pro Connectors CANBN9078 Connector unit for male cable mount. CANCB22 Boot for CCM4-PK CANBN9079 Connector unit for female cable mount. CANCB23 Boot for CCF4-JK ----------------------------------------------------------- ---------------------------------------------------------- CANDCM02 Dust cap for female Triax connector. CANDCM03 Dust cap for male Triax connector. Dust Caps for Multi-Pin Coax Connectors *Great for these cables: Canare L-4CTFX, Belden 9267, 1856A, CANDCF01 Dust cap for female panel mount connector. 1857A, and Gepco LVT67859 & VT61859 CANDCM01 Dust cap for male panel mount connector. Accessories Accessories Boots BNC Dust Caps CB Boots Protects all unused BNC bulkhead receptacles from dirt and dust Push-on silicon rubber boots prevent cable damage at the connector CANBCJ-DC sleeve due to flexing and fatigue. The best in boots! • CB03, CB04, & CB05 available in all 10 Canare Colors** Isolation Bushings • CB01, CB24, CB25, & CB26 available in black, blue, green, red, white, & yellow CABC0705-9 For BCP-C Series Connectors CANCB01 For L-1.5C3VS CANCB02 For L-2.5CFB, V-3C (black only) 2-piece expandable isolation bushing available in black, blue, green, CANCB03 For L-3C2VS, L-3CFB, V-3C, V-3CFB red, white, and yellow. High compression ABS plastic accomodates CANCB04 For LV61S, L-4CFB, V-4CFB 1.2mm - 3mm thick panels. Fits double-D hole punch. CANCB05 For LV77S, L-5CFB, V-5C, V-5CFB CANIU-7/16 For MBCP-C, FP-C, & RCAP-C Series Connectors CANCB24 For L-3C2VS, L-3CFB, V-3C, V-3CFB Works with all Canare standoff connectors (see pg 54) CANCB25 For LV61S, L-4CFB, V-4CFB CANCB26 For LV77S, L-5CFB, V-5C, V-5CFB **Colors: black, blue, brown, gray, green, orange, purple, red, yellow, & white. National Order Line: 24 Hour Fax Orderline: West Coast Sales & Service: have@haveinc.com800-999-HAVE (4283) 518-828-2008 661-266-1624 store.haveinc.com
  • 53. 54 Video Receptacles & Adapters Canare Video Receptacles 75Ω RCA Bulkhead Receptacles The Pros Choice! Canares Flush Mount and Standoff Bulkhead Receptacles stand above the rest in design and quality of workmanship. The Pros choice! Flush Mount Stand Off Canare BNC, RCA, and F Bulkhead receptacles all feature: Canares RCA Bulkhead Flush Mount Receptacles are totally isolated • Beryllium Copper center contact material with gold plating from the panel with their built-in isolation bushings. Plus, the recessed • Brass body with Nickel material plating connection means effective protection from damage in high traffic • Diecast Aluminum flange with Nickel material plating areas. Use standoff versions when flush mounts are not necessary. • Standoff Versions all with Double D Hole Punch CANRJBCJRU** 75Ω RCA female to 75Ω BNC female (Flush • Standoff Versions all can use Canare Isolation Bushing IU-7/16 Mount) CANRJRU** 75Ω RCA female to solder cup (Flush Mount) 75Ω BNC Bulkhead Receptacles CANRJBCJR* 75Ω RCA female to 75Ω BNC female (Stand Off) CANRJR* 75Ω RCA female to solder cup (Stand Off) **Insulator colors: Red, green, blue, yellow, and white *Insulator colors: Red, yellow, and white Flush Mount Stand Off ----------------------------------------------------------- ---------------------------------------------------------- Canares unique recessed flush mount receptacles completely 75Ω F Bulkhead Receptacles protect the housed connector, and with built-in panel isolation bushings they can safely reside on panels alongside any audio, power, or intercom lines without crosstalk or grounding problems. Use standoff versions when flush mounts are not necessary. Flush Mount Stand Off CANBCJJRU 75Ω BNC female to 75Ω BNC female (Flush Mount) Canare’s F Bulkhead Flush Mount Receptacles are totally isolated CANBCJRU 75Ω BNC female to solder pin (Flush Mount) from the panel with their built-in isolation bushings. Plus, the CANBCJJR 75Ω BNC female to 75Ω BNC female (Stand Off) recessed connection means effective protection from physical CANBCJR/1 75Ω BNC female to solder pin (Stand Off) damage in high traffic areas. Total Canare Quality THROUGHOUT! CANBCJFJR 75Ω BNC female to 75Ω F female (Stand Off) Use standoff versions when flush mounts are not necessary. ----------------------------------------------------------- ---------------------------------------------------------- CANFJJRU 75Ω F female to 75Ω F female (Flush Mount) 75Ω BNC PC Board Hex Nut Mounted Receptacles CANFJJR 75Ω F female to 75Ω F female (Stand Off) Attention OEMs! HAVE has it! All Canare Receptacles feature bandwidth VSWR Great for Serial Digital Video, Analog Video, and Broadband Telcom. of <1.1 and Return Loss Mounts to any PC or other chassis, with hex nut. DC to 2GHz of >26dB, CANBCJFPLV01/CANBCJ-FPLHA Front chassis mount, right Berylium Copper cen- angle, vertical bayonet studs. Use with IU-7/16 ISO Bushing ter contacts and die cast CANBCJRPLV/CANBCJ-RPLH Rear chassis mount, right angle, AL Nickel flange mate- vertical bayonet studs. Canare receptacles in use on our own Cable Test Bench rial. CANBCJFPC02 Front chassis mount, straight. Use IU-7/16 ISO Bushing CANBCJRPC/1 Rear chassis mount, straight and flat to PCB. Can be mounted horizontally for narrow profile. ----------------------------------------------------------- ---------------------------------------------------------- New BNC Terminators/Adapters BNC Terminators/Adapters Mid-Size Patch Plug to BNC Adapter 75Ω BNC Terminator Plug NEW ! BCJ-MVP Return loss of 26dB or greater at DC-3GHz BCP-TA True 75Ω BNC terminator, <1.1VSWR 75Ω BNC to N Plug Adapter 75Ω Inline Adapter NEW ! BCJ-J 75Ω BNC inline cable extension adapter, jack to jack NCJBCJR BNC female to N female, uses Canare IU-7/16 National Order Line: 24 Hour Fax Orderline: West Coast Sales & Service: have@haveinc.com 800-999-HAVE (4283) 518-828-2008 661-266-1624 store.haveinc.com
  • 54. Video Connectors 55 Canare Video Connectors New Items! The Pros Choice! Mid-Size BNC Plugs For use with NEW Canare video connectors are specially engineered to meet the demands of todays high performance video equipment. The Pros Choice for CanaresNew Mid-Size ! quality and reliability. Patch Bays! • Canare BNCs feature true 75-ohm construction, with Gold coated center contact pins and Beyrllium copper external contacts. The Canares newly designed Slim BNC plugs, with the same famous center pin design allows no movement, preventing the most Canare quality of workmanship and performance. For use with common connector failure. Canares new innovative Mid-Size High Density Patchbay. return loss of 20dB or greater at DC-2.4 GHz. 12mm O.D. is ideal for use • Canare RCA connectors also feature Gold plated center shafts with high density integrated devices. and long throw connector bodies for quick & easy handling. • Canares F connectors are the worlds first precision, highly CANMBCPC3F CANMBCPC4F CANMBCPC5F CANMBCPC25F reliable 75-ohm F connector featuring locking center crimp pin for CANMBCPC4 CANMBCPC53 superior pull strength. N Type Connector NEW ! 75Ω BNC Crimp Plugs Canare’s new N type connector designed specifically for their new L-8CHD HDTV-SDI Video Coax cable. This solder type connector is BCP-C BCP-LC compatible with New Canare L-8CHD Cable. Can be adapted to BNC with Canare NCJ-BCJR (N female to BNC female) CANBCPC1 CANBCPC4B CANBCPC55A CANBCPC25F CANNPCH8HD CANBCPC4F CANBCPC5FA CANBCPC3B CANBCPC41 CANBCPLC5F CANBCPC3F CANBCPC5B CANBCPC77A CANBCPLC3F CANBCPC51 CANBCPC7FA CANBCPC32 CANBCPC53A CANBCPC71A CANBCPC6HD CANBCPC7HD CANARE - THE PROS CHOICE! 75Ω RCA Crimp Plugs RCAP-C CANRCAPC3A CANRCAPC4F CANRCAPC5F CANRCAPC3F CANRCAPC5A CANRCAPC77 CANRCAPC4A CANRCAPC53 The connector on the left is a commonly used 50 ohm BNC. Notice that the dielectric (white ring) is 75Ω F Crimp Plugs visable at the top of the outer contact. The Canare plug on the right is a true 75 ohm BNC connector. Its dielectric material is recessed...your visual assurance that there will be proper 75 ohm impedance FP-C matching between the source equipment, intercon- necting cables, patchbay, and load equipment. The CANFPC3 CANFPC5 CANFPC5F CANFPC3F end result: no signal reflections (VSWR) for longer CANFPC51 CANFPC7FA CANFPC4 CANFPC53A cable runs and enhanced system performance. CANFPC71A CANFPC4F CANFPC55A CABC0705-9 Crimp Plug ConnectorsM Model Type Bandwidth Imp. Body Center Outer Dielectric Crimp Crimp Cable Insulation Voltage Contact VSWR Material Contact Contact Pin Sleeve Retention Resistance Rating for Resistance Return Loss Plating Material Plating Material Plating Material Plating Material Plating lbs. (kgs) at 500V DC 1 minute See the BNC & Body Mid-Size Crimp Pin <1.1 >26 dB 75Ω Brass Nickel Brass Gold PTFE Copper Tin >55 >24.9 >1000MΩ 1500V AC (rms) Center: <6mΩ Canare video BNC Crimp Sleeve Outer: <3mΩ cable/connector RCA Body Crimp Pin <1.1 >26 dB Brass Nickel Phosphor Bronze Beryllium Copper PPO Noryl Brass Gold Copper Tin >55 >24.9 >100MΩ 500V AC (rms) <10mΩ cross reference Crimp Sleeve Gold Gold chart! F Dual Crimp <1.1 75Ω Brass Brass PTFE Copper >55 >500MΩ 500V AC (rms) Center: Pin and >26 dB Nickel Gold Tin >24.9 <5mΩ Sleeve Outer: <5mΩ National Order Line: 24 Hour Fax Orderline: West Coast Sales & Service: have@haveinc.com800-999-HAVE (4283) 518-828-2008 661-266-1624 store.haveinc.com
  • 55. 56 ADC Video Connectors ADC Video Connectors Precision 75-Ω BNC Connectors Precision 75-Ω RCA Connectors Many seasoned broadcast engineering professionals say ADCs BNC ADC RCA’s have precision-molded insulators with locking gold-plated Connectors are the most reliable and universally accepted method of center conductors to ensure nominal 75-Ohm characteristic impedance. terminating coaxial cable in the market today. Outstanding electrical ADCs proprietary geometrically molded insulator design result in a performance (up to 3 GHz) is achieved by unique design elements in significant reduction of impedance mismatch and improved transmis- the industrys truest 75-Ohm connector. Precision-molded insulators sion reliability for digital applications. ADC RCA Connector features with locking gold-plated center conductors ensure true 75-Ohm include: characteristic impedance. ADC BNC features include: • Electrical performance up to 3 Ghz • Straight BNC’s, True 75-ohm • 50 micro inch gold-plated locking (not captive) internal center • Improved performance with true 75-ohm characteristic conductor crimps to cable impedance through the entire connector • Exclusive closed-entry center pin contact RCA pin/receptacle • Gold-plated locking center conductor • Nominal 75-ohm characteristic impedance end-to-end • .625” crimp sleeves for greater pull off force and 100% • Compatible with hex, square and 12-point crimp tools and guided mating meets or exceeds MIL-STD-202F requirements • In addition to the .042-inch square pin crimp, all connectors ADCCRCA01 for 734, 1505A, VPM2000 cable type are compatible with a 12 point method of crimping or .042- ADCCRCA05 for 1187A, HEC2, F-HEC59 cable type inch Hex crimp ADCCRCA08 for 1694A, VSD2001, VSD2001TS cable type • Exceeds SMPTE 259, 274 and 292 M standards ADCCRCA13 for 1855A, RGBS250, VDM250D, VDM230 cable type ADCBNC01N for 734, 1505A cable type ----------------------------------------------------------- ---------------------------------------------------------- ADCBNC08N for 1694A, VSD2001, VSD2001TS, 9058 cable type ProAx™ 75-Ω Triax Camera Connectors ADCBNC13N for 1855, RGBS250, VDM250D cable type ----------------------------------------------------------- ---------------------------------------------------------- Precision 75-Ω F Connectors ADCs line of ProAx™ Triaxial Camera Connectors will change the way you think about this component forever. These connectors have innovative features such as field repairable center conductors that ADCs high-performance F connectors are designed for demanding eliminate the need to re-strip, O-rings that protect the signal path digital applications where a high-quality, high-performance F against moisture, fewer parts to assemble, and compatibility with the connector is required. The perfect choice for use in digital head- tooling you already own. ADC ProAx Triax features include: ends, satellite down links, and high performance customer premises • Two-piece center conductor and housing assembly allows applications. ADC F Connector features include: replacement in the field without having to re-strip and re- • True 75-ohm design for performance up to 3Ghz terminate the entire connector • Superior return loss of –30 dB to 3 GHz • Gender parts can be swapped back and forth between males • Gold-plated locking (not captive) center conductor, crimp-on and females in only a few seconds center pin • Patented ProAx connectors can be format reversed between • Diamond knurled crimp hub and long .500” crimp sleeve U.S. and global formats in only seconds • Long 3/8” wrench flats • Designed to fit standard U.S. triax cables as well as global • Exclusive molded Ultem® center conductor insulator metric 8mm, 11mm, and 14mm cables ADCCF01 for 734, 1505A, VPM2000 cable type • Solid outer shield ground maintains the ground no matter ADCCF05 for 1187A, HEC2, F-HEC59 cable type what the conditions ADCCF08 for 1694A, VSD2001, VSD2001TS, 9058 cable type • Sturdy construction with each female ProAx connector being ADCCF13 for 1855A, RGBS250, VDM250D, VDM230 cable type made of machined brass with a stainless steel interior ring • Patented panel mount system with an industry exclusive mounting kit: a unique 45-degree and the standard 90- This is just a small selection of the most popular ADC connectors! degree straight We carry the complete ADC line! • Compatibility with other industry triaxial connectors from Kings Electronics Co. Inc., W.W. Fischer SA, and LEMO SA, as well as standard industry tools and dies ADCTCJB38 Female for 3/8” B (.360) type cable ADCTCPB38 Male for 3/8” B (.360) type cable ADCTCJC12 Female for 1/2” C (.520) type cable ADCTCPC12 Male for 1/2” C (.520) type cable National Order Line: 24 Hour Fax Orderline: West Coast Sales & Service: have@haveinc.com 800-999-HAVE (4283) 518-828-2008 661-266-1624 store.haveinc.com
  • 56. NEUTRIK® BNC Video/Data Connectors 57 NOTE: Add NEU- prefix to all Neutrik parts when ordering Push-Pull/Rear Twist Connectors Bulkhead Jacks 75Ω BNC Video Connectors 75Ω BNC Video Connectors Neutrik offers BNC 75Ω cable connectors in push-pull, rear twist, and Neutriks BNC Bulkhead Jacks, when used in conjunction with the tiny rear twist versions. Featuring a true 75Ω design that meets the Neutrik 75Ω BNC Rear Twist or Push-Pull Cable Connectors, are the stringent requirements of HDTV/DVD, these connectors sustain ideal combination for BNC applications. The recessed bulkhead jacks in consistent impedance at high frequencies up to 3GHz; are easy to the "D" size housing use the same hole cutout size as other Neutrik "D" handle in high density applications such as video patchbays and series sized connectors such as the Speakon NL4MP and the XLR switchers; shows excellent return loss and VWSR; consist of machined Receptacles in the "D-L-1" series. The shell provides flush mounting and parts that are precisely made to Neutriks high standards; and offer a protection of the jacks from damage. The isolated versions solve center pin assembly with a snug fit to provide tactile indication when potential grounding problems and prevent common-mode influence the contact is snapped into position. with other connections conducted over the same panel ground potential. Based on a new production technology, the machined Push-Pull BNCM Part Contact Belden Canare Commscope stainless steel connector body provides an extremely rugged and non- Number Plating Cable Cable Cable NBNC75PDE6 G 1855A 7538 abrasive connection over long term use. NBNC75PFE7 G 46899 Bulkhead JacksM Description Feed Through Feed Through Isolated Grounded NBNC75PGE7 G V-3C Recessed, D-Shape Housing NBB75DFI NBB75DFG NBNC75PIE9 R 1506A 2065V Recessed, Black D-Shape Housing NBB75DFIB NBB75DFGB NBNC75PLE9 R V-4CFB Bulkhead NBB75FI NBB75FG NBNC75PLS9 R 1505A/1426A L-4CFB 5565 NBNC75PNS7 G 8241 LV61-S 5563 See Neutrik Price Sheet for all pricing information NBNC75PQS11 P 1695A 2279V NBNC75PTS11 P 1694A 5765 EtherCon® NBNC75PVS9 R V-5C RJ45 Data Receptacle NBNC75PVS11 P V-5CFB For Harsh & Rear Twist BNCM Part Contact Belden Canare Commscope Number Plating Cable Cable Cable Demanding Condition NBNC75BDD6 G 1855A 7538 s NBNC75BFG7 G 46899 EtherCon is a rugged connector developed to provide solutions for data NBNC75BGG7 G V-3C transfer in harsh and demanding applications. This series of connectors NBNC75BIJ9 R 1506A 2065V is especially applicable for Ethernet networking in audio, commercial, entertainment, live stage production, DMX lighting protocols, industrial, NBNC75BJJ9 R V-4CFB and outdoor Internet access environments. Both male cable end NBNC75BLP7 G 8241 V-61S 5563 carriers and assembled female receptacles are available: the male offers NBNC75BLP9 R 1505A/1426A V-4CFB 5565 a diecast metal shell as a carrier for pre-assembled RJ45 cables, and the female chassis connectors are available based on the current Neutrik "A/ NBNC75BQP11 P 1695A B" series of XLR receptacles with secure latching system (not found on NBNC75BRS9 R V-5C other RJ45 receptacles). Color coded rings & boots are available (see page 45). NBNC75BTU11 P 1694A 5765 NEW - Neutrik now offers a "D" series receptacle, available with either NBNC75BWS11 P V-5CFB IDC Krone or 110 punchouts! CABC0705-9 NBNC75BXY9 R 8281 EtherCon Connectors/ReceptaclesM Description Housing with Housing in chuck and bushing black chromium NBNC75BYY11 P L-5CFB Cable Connector NE8MC NE8MC-B Rear Twist TinyM Part Contact Belden Canare Commscope Number Plating Cable Cable Cable NBTC75BFI4 P 1502A/1521A/1522A Description A Style B Style D Style (All Plastic) (Nickel Ring) NEW ITEM NBTC75BLI4 P L-1.5C2VS Horizontal PCB NE8FAH NE8FBH NBTC75BVV5 R 1406A/1407B/1417B Vertical PCB NE8FAV NE8FBV NBTC75BXX5 R 8218 IDC (110 punchdown) NE8FAV-Y110 NE8FDV-Y100 NBTC75BXX6 G 1865A 7536 IDC (Krone) NE8FAV-YK NE8FDV-YK National Order Line: 24 Hour Fax Orderline: West Coast Sales & Service: have@haveinc.com800-999-HAVE (4283) 518-828-2008 661-266-1624 store.haveinc.com
  • 57. 58 Video Connectors & Adapters Video Connectors Video Adapters BNC Series Premium Interseries Economical Quality 279100 111014 12-1001 BNC male, crimp type for RG59/U 3 piece 11-1014 BNC male to F female crimp center pin 11-1015 BNC male to RCA female 12-1002 BNC male, solder type for RG559/U 11-1016 BNC female to RCA male 12-1003 BNC male, fast fit for for RG59/U, no 11-1017 RCA male to F female soldering or crimping - twists and locks 11-1018 F female to RCA female onto cable 11-1019 Phono female to F male 12-1003RA Right angle version of 12-1003 11-1020 BNC female to F male 12-1004 BNC female, crimp type for RG59/U ----------------------------------------------------------- ---------------------------------------------------------- 12-1006 BNC female, chassis mount Premium RCA ----------------------------------------------------------- ---------------------------------------------------------- RCA Series 123002 11-1008 RCA female to RCA female ----------------------------------------------------------- ---------------------------------------------------------- 12-3001 RCA male, crimp type for RG59/U Premium F Series 12-3002 RCA male, solder type for RG59/U 12-3003 RCA female to female, chassis mount 14-1003 RCA female, chassis mount 111005 Circular Equipment Connectors 11-1005 F female to F male 11-1006 F female to F male push-on adapter 11-1007 F right angle female to male 126001 12-6001 EIAJ 10 pin male, cable end 12-6002 EIAJ 10 pin female, cable end Video Adapters 12-6007 EIAJ 14 pin male, cable end 12-6008 EIAJ 14 pin female, cable end Economy Interseries 12-6017 EIAJ 26 pin female, cable end 12-6018 EIAJ 26 pin male, cable end ----------------------------------------------------------- ---------------------------------------------------------- F Series 112017 11-2014 BNC male to F female 11-2016 BNC female to RCA male 124001 11-2017 RCA male to F female 11-2018 F female to RCA female 11-2019 RCA female to F male 12-4001 F male, crimp type for RG59/U ----------------------------------------------------------- ---------------------------------------------------------- 12-4002 F male, fast fit for RG59/U 12-4003 F female to female, chassis mount with nut Economy BNC Series 12-4004 F female, chassis mount with nut 12-4005 F 75 ohm terminator 12-4006 F male, crimp type with 1/2" attached ring 112002 11-2001 BNC female to BNC female 11-2002 BNC right angle female to male 11-2003 BNC female-male-female National Order Line: 24 Hour Fax Orderline: West Coast Sales & Service: have@haveinc.com 800-999-HAVE (4283) 518-828-2008 661-266-1624 store.haveinc.com
  • 58. Audio/Video Racks & Patchbays 59 Ahh the Patchbay… Arguably the industry’s most awe- some component. With abilities to patch SO many elements together, quietly, professionally, elegantly; and to make the connections… If only patchbays could be involved in the peace process… Alas they cannot, but we can certainly help YOU with patching all YOUR equip- ment, thoroughly, accurately, beautifully, seamlessly. You can count on HAVE for patchbay accessories as well. Custom Panels, Wallplates, Stage Boxes, Switchers, Racks, Mounting Systems, Power Strips and MORE… Here in our catalog we’re featuring great rack & patchbay products from ADC, AVP, Audio Accessories, Canare, Neutrik, and Middle Atlantic, but remember…we have a lineup of so much more! CALL US FOR PRODUCTS FROM INDUSTRY LEADERS LIKE : CABC0705-9 National Order Line: 24 Hour Fax Orderline: West Coast Sales & Service: have@haveinc.com800-999-HAVE (4283) 518-828-2008 661-266-1624 store.haveinc.com
  • 59. 60 Patchbays Audio Accessories Quality Audio Accessories manufactures some of the best jacks and patchbays in the business way up there in southwestern New Hampshire. It’s a place where the moose run free, the humans are pretty frisky themselves, and, most importantly, where quality products are still a way of life. And if you can’t trust someone who goes moose watching before breakfast who can you trust? Audio Accessories have been leaders in the industry for over fifty years, when their founder started manufacturing super-reliable high-end audio patchbays. Ever since then, their patchbays have been the ones audio and video professionals turn to, whether they need one or hundreds of patchbays, on time, on budget, and on spec. Whether you’re dealing with audio, video, or digital patchbays, pre- wired or au naturel, HAVE has your Audio Accessories patchbay. Standard MAXI (1/4” Long-Frame) and MINI (Bantam) patchbays AUDWEP962SH - Shorti Quick-Switch Line ready to ship fast. And their exclusive line of SKINI patchbays that were developed for installations where space is at a real premium. They use traditional 1/4” jacks but can fit up to 32 in a row. Bantam Any of these patchbays can be supplied ready to wire, or prewired to just about anything—including QCP, EDAC, Cannon, AMP, and Krone connectors—just about any which way you From Audio Accessories Shorti Quick-Switch™ Line, with Mini could possibly want. So if you need something other than the Jacks (BANTAM/TT) These exclusively unique patchbays allow you standard prewired Audio Accessories patchbays you see here, to set the individual normals on a per-jack basis simply by moving contact our sales department! the Quick-Switch™ shunt to the desired setting (FN, HN, NN). The TIP, RING and SLEEVE of each jack is brought out to indi- Contact us for all your interface needs! We can make vidual 3-pin EDAC connectors, mounted on the back of a 3-inch deep “SHORTI” box, with cabling support tray behind for your Audio Accessories patchbay completely plug and bundling incoming cables. play by custom assembling any cabling you need or use • 2x48x2RU MINI (Bantam/TT) Patchbay our Flexygy Flat DB25 or HAVEFlex DB25 cables (see • Exclusive Quick-Switch™ Normalling System pg. 4) • 96 3-pin male mating connectors and 288 crimp pins supplied with the panel • Shipped half-normalled unless otherwise specified Shorti Patchbays • For Longframe Version, see AUDWEP261SH AUDWDBP9615SH - Shorti Quick-Switch Line • Total Audio Accessories Quality NEW! Bantam to AUDWEP261SH - Shorti Quick-Switch Line DB25 - Great for ProTools! Longframe The next generation of Shorti Patchbays has arrived from Audio Accessories; this 2x48 audio patchbay is wired to DB25 connectors. Featuring exceptional flexibility with exclusive Quick-Switch normalling From Audio Accessories Shorti Quick-Switch™ Line, with ¼” system located on the rear of the panel, allowing you to set the Longframe jacks. These exclusively unique patchbays allow you individual normals on a per jack basis, simply by moving the Quick- to set the individual normals on a per-jack basis simply by moving Switch™ shunt to the desired setting (FN, HN, NN). The TIP, RING and the Quick-Switch™ shunt to the desired setting (FN, HN, NN). SLEEVE of each jack is brought out to DB25 connectors pinned out for The TIP, RING and SLEEVE of each jack is brought out to indi- ProTools, mounted on the back of a 3-inch deep "SHORTI" box, with vidual 3-pin EDAC connectors, mounted on the back of a 3-inch cabling support tray behind for bundling incoming cables. deep “SHORTI” box, with cabling support tray behind for • 2 x 48 x 1.5 RU Mini (Bantam/TT) Audio Patchbay bundling incoming cables. • Tip, Ring, Sleeve of each jack wired out to a DB25 Female • 2x26x1RU MAXI Long-Frame Patchbay connector (8 jacks in each) • Exclusive Quick-Switch™ Normalling System • DB25 Connector pinned out for ProTools interface. • 52 3-pin male mating connectors and 156 crimp pins • Reconfigurable normals and grounds, located on the rear of the unit supplied with the panel • Cabling support tray for bundling down incoming cables • Shipped half-normalled unless otherwise specified • For use with Analog OR Digital • For Bantam/TT Version, see AUDWEP962SH • Total Audio Accessories Quality • Total Audio Accessories Quality National Order Line: 24 Hour Fax Orderline: West Coast Sales & Service: have@haveinc.com 800-999-HAVE (4283) 518-828-2008 661-266-1624 store.haveinc.com
  • 60. & NEUTRIK® Patchbays 61 Sub-D Patchbays NEUTRIK PatchLink SPL • These patchbays come equipped with Sub-D 25-Pin connectors. 1/4” Audio System Patch Panel We can make your patchbay with just about any Sub-D connector you want—9, 15, 25, 37, 50 or 78. You tell us, we’ll get it for you • These come with D-SUB 25 pin AUD248SUBD25PIN Bantam See our Flexygy DB25 and HAVEFlex DB25 assemblies Neutrik introduces the PatchLink SPL, its third generation of 1/4" patch panels. This newest version of Neutriks popular series offers on pg. 4! improved economy, exceptional versatility, and ease of use in half- normalled or isolated configurations. Configurations are screen printed on top of each panel for easy viewing. The normalled jack 2x48 to Sub-D 25-Pin (most common). This 1RU (1.75”) panel is colored gray for easy identification. has two rows with 48 MINI jacks in each row. Tip, Ring, and Part Description Patchlink SPL/Acc Sleeve only of all jacks are wired out to 25-pin Sub-D connectors Number (8 jacks in each). Normals are strapped internally. These units NEUNYSSPPL 1/4” Modular Patch Panel, 1 RU integrate well with DA-88 machines and ProTools. NEUNYSSPCR Send/Return Split Print Module ----------------------------------------------------------- ---------------------------------------------------------- AUD224SUBD25PIN Longframe NEUNYSSSR8 1/4" Patch Box with 8 send/returns Great for Pro Tools & Tascam DA88 Shop online! machines! store.haveinc.com 2x24 to Sub-D 25-Pin. This 1RU (1.75”) panel has two rows with 24 long-frame jacks in each row. Tip, ring, and sleeve only of all jacks are wired out to 25-pin Sub-D connectors (8 jacks in each). NEUTRIK Easy-Patch Normals are strapped internally. These units integrate well with 96-Bantam (TT) Jack Patch Panel Harrison consoles, and DA-88 machines. ----------------------------------------------------------- ---------------------------------------------------------- Cannon DL Patchbays AUDDLMAXIFN (Full Normal) AUDDLMAXIHN (Half Normal) This updated version of the Neutrik Easy-Patch system is easily programmable for any one of five signal routing configurations (unit ships in the half-normalled, bottom row configuration) and for the grounding system of your choice. Each individual jack can be changed or reconfigured quickly even while the unit is "on air". The Easy-Patch offers two contact points per (TRS) terminal with a The DL Maxi has twenty-four long-frame jacks mounted in each uniquely designed mechanism for the normalling contact. To row of a 1RU (1.75”) two-row panel, with tip, ring, and sleeve change or repair a jack, simply remove the front panel to reveal the only out to the DL connectors. This unit is available in a full- or module, replace or reconfigure the jack(s) and replace the panel. Its half-normalled configuration. that easy! System is 1U high and 7" deep for 19" rack mounting. • Popular with facilities that have SSL consoles Easy-PatchM Part • Typical Cannon units are equipped with DL96R connectors. Number Description Others are available. Contact our sales department for details NEUNPPATTPT patch panel, 2x48 jacks, half normalled, 288 push terminals for easy wiring ----------------------------------------------------------- ---------------------------------------------------------- AUDDLMINIFN (Full Normal) NEUNPPATTE56 patch panel, 2x48 jacks, half normalled, 6x56 pole ELCO male connectors CABC0705-9 AUDDLMINIHN (Half Normal) NEUNPPATTS patch panel, 2x48 jacks, half normalled, 288 solder terminals for fixed installations NEUNJ3TTA4HNB blocks of 2 channels; half normalled bottom row; cover ident color: clear NEUNJ3TTA4HNT blocks of 2 channels; half normalled top row; cover ident color: yellow NEUNJ3TTA4FN blocks of 2 channels; full normalled; cover ident color: green NEUNJ3TTA4P blocks of 2 channels; parallel; cover ident color: blue The DL Mini is available in 2 rows of 48 MINI jacks mounted on a NEUNJ3TTA4I blocks of 2 channels; isolated; cover ident color: orange 1RU (1.75”) panel, with tip, ring, and sleeve only out to the DL connectors. Again, any normalling type can be supplied. Call us for all your Audio Accessories and Neutrik patchbay needs! National Order Line: 24 Hour Fax Orderline: West Coast Sales & Service: have@haveinc.com800-999-HAVE (4283) 518-828-2008 661-266-1624 store.haveinc.com
  • 61. 62 Audio Patchbays & Tools Morph Audio Patchbays AVP Mosaic Morph audio patching components provide unprec- edented functionality and circuit ID standards to simplify design, installation, operation and maintenance. Features include: • Morph Modules can be effortlessly identified, mixed and changed. Entire Racks of jackfields can be re-configured anytime. • Color Coding of EVERY Circuit. • Numbered jack positions for quick and accurate installation and troubleshooting. • Front mount jacks simplify system re-design and maintenance. • GREAT for AES/EBU and Analog applications. • Excellent for Mobile Unit applications and in harsh environments. • Morph Systems short depth allows installation in the tightest spaces. Each Morph Jackfield is shipped complete with crimp- pin mating connector kit and a captive screwdriver. • All with Easy-Tie Pivoting Cable Bar • You’ll need our high-performance HAVEFlex™ Longframe Patch Cords! – Part ID 206101R and 206101B or HAVEFlex™ Bantam Patch Cords! – Part ID 206001R and 206001B (see page 11) Longframe Morph Patchbays - 1RU & 2RU Bantam Morph Patchbays - 1RU & 2RU AVPAMA224E1LFNEO3 2x24 1RU Frame with 24 Dual Full AVPAMB248S1LFNEO3 2x48 1RU Frame with 48 Dual Full Normal Modules, with Mating Connector Kit Normal Modules, with Mating Connector Kit AVPAMA224E2LFNEO3 2x24 2RU Frame with 24 Dual Full AVPAMB248S2LFNEO3 2x48 2RU Frame with 48 Dual Full Normal Modules, with Mating Connector Kit Normal Modules, with Mating Connector Kit AVPAMA224E1LHNEO3 2x24 1RU Frame with 24 Dual Half AVPAMB248S1LHNEO3 2x48 1RU Frame with 48 Dual Half Normal Modules, with Mating Connector Kit Normal Modules, with Mating Connector Kit AVPAMA224E2LHNEO3 2x24 2RU Frame with 24 Dual Half AVPAMB248S2LHNEO3 2x48 2RU Frame with 48 Dual Half Normal Modules, with Mating Connector Kit Normal Modules, with Mating Connector Kit AVPAMA224E1LNNEO3 2x24 1RU Frame with 24 Dual No AVPAMB248S1LNNEO3 2x48 1RU Frame with 48 Dual No Normal Modules, with Mating Connector Kit Normal Modules, with Mating Connector Kit AVPAMA224E2LNNEO3 2x24 2RU Frame with 24 Dual No AVPAMB248S2LNNEO3 2x48 2RU Frame with 48 Dual No Normal Modules, with Mating Connector Kit Normal Modules, with Mating Connector Kit AVP Morph crimp, insertion, & ejection tools are on pg 80. National Order Line: 24 Hour Fax Orderline: West Coast Sales & Service: have@haveinc.com 800-999-HAVE (4283) 518-828-2008 661-266-1624 store.haveinc.com
  • 62. Audio Patchbays & Tools 63 Full Enclosure RPT Audio Patchbays AVP Full Enclosure Standard Audio Jackfields provide unprec- edented functionality and total AVP quality. Features include : • GREAT for AES/EBU and Analog applications. • AVP Circuit Identification System (CIS). For Color Coding of EVERY Circuit. • AVP Rapid Punch Terminal System (RPT) with Lifetime Tip Replacement and easy serviceability. • Front and Rear Panels are removable without moving the unit from the rack. • RPT Pivoting Cable Bar significantly improves accessibility. • RPT Terminals accept larger diameter wire, and properly terminates bulkier 110-ohm Digital Audio Cable. • Terminate different wire gauges even on the same terminal. • RPT Terminals are certified for 300 punch cycles. • Wire Gripper locates and retains the wire before the punch enabling quick termination with just one hand. • You’ll need our high-performance HAVEFlex™ Longframe Patch Cords! (Part ID 206101R and 206101B) or HAVEFlex™ Bantam Patch Cords! (Part ID 206001R and 206001B) Longframe Full Enclosure RPT Patchbays - 1RU & 2RU Bantam Full Enclosure RPT Patchbays - 1RU & 2RU AVPAPA224E1LFNRPT 2x24 Longframe Jacks, 1RU, Full AVPAPB248S1LFNRPT 2x24 Bantam Jacks, 1RU, Full Normals, RPT Punch Block Normals, RPT Punch Block AVPAPA224E2LFNRPT 2x24 Longframe Jacks, 2RU, Full AVPAPB248S2LFNRPT 2x24 Bantam Jacks, 2RU, Full Normals, RPT Punch Block Normals, RPT Punch Block AVPAPA224E1LHNRPT 2x24 Longframe Jacks, 1RU, Half AVPAPB248S1LHNRPT 2x24 Bantam Jacks, 1RU, Half Normals, RPT Punch Block Normals, RPT Punch Block AVPAPA224E2LHNRPT 2 x 24 Longframe Jacks, 2RU, Half AVPAPB248S2LHNRPT 2x24 Bantam Jacks, 2RU, Half Normals, RPT Punch Block Normals, RPT Punch Block AVPAPA224E2LNTRPT 2 x 24 Longframe Jacks, 2RU, Normals AVPAPB248S2LNTRPT 2x24 Bantam Jacks, 2RU, Normals Out (2RU ONLY), RPT Punch Block Out (2RU ONLY), RPT Punch Block CABC0705-9 AVP RPT punch & removal tools are on pg 80. We carry the full line of AVP products - call with your needs! National Order Line: 24 Hour Fax Orderline: West Coast Sales & Service: have@haveinc.com800-999-HAVE (4283) 518-828-2008 661-266-1624 store.haveinc.com
  • 63. 64 ADC Audio & Video Patchbays Pro Patch™ Professional Audio Pro Patch™ Professional Midsize Patchbays Video Patchbays ADC’s Pro Patch™ Programmable bantam modular systems offer ADC’s Pro Patch™ family of products incorporates the ultimate unprecedented reliability and flexibility in a convenient, space- in cable management of video signals. Pro Patch video panels saving size and lightweight package. Specially engineered for come in a wide variety of panel configurations, jack types and every day use in demanding mobile trucks, this series is the even color options. We are featuring 2 of ADC’s most popular industries only bantam panel fully qualified to meet stringent configurations here, but please call with any ADC need! MIL-STD-202F standards for ruggedness, and MIL-J-641E for jack compliance. PPI Series Midsize Panels PPI series patchbays are the ideal solution when you need a Pro Patch Programmable Bantam rugged, full-featured panel that will stand up to the most • Industrys only bantam audio panel fully qualified to meet demanding professional applications. Features include a rugged demanding military standards (MIL-STD 202F) for ruggedness, epoxy powder-coated steel WELDED chassis with a durable and MIL-J-641E for jack compliance molded ABS jack insert, rear silkscreening for port id, and an • High-density 2x48 WECO-compliant bantam jacks on 0.312- adjustable rear cable support bar for superior strain relief, AND inch centers exclusive ADC snap-over designation system that prevents cards • DIP switch selectable circuit normals and grounds and windows from coming loose from the panel as is common • Ultra-shallow five-inch depth with other systems. PPI Panels are covered by an industry- • Fully AES/EBU 110 Ohm digital and analog compliant exclusive 15 year warranty against defects. • Lightweight panels weigh only 6.2 pounds • Modular design allows individual jack access/configuration without affecting other circuits • Grounds can be configured on an individual circuit basis for lift, chassis, sleeve, and common ground • Modules snap into place, tabs lock into chassis WITHOUT REMOVING THE PANEL FROM THE RACK! • Circuit status icons allow users to identify circuit status with colored snap-in icons in eight colors The PPI15232RS-MVJT-BK is a Pro Patch WSI video panel, 1.5 • Designation strips cover tabs to prevent unauthorized access RU, black with 2 rows of 32 midsize super video jacks with 75- to circuit configuration switches Ohm termination. PPI versions include cable management and • Converts to a 1.5 rack unit panel with a patent-pending feature a welded steel frame. escutcheon kit PPI15232RS-MVJT-BK 2.63” 2x32 MVJ-3T Jacks, black • Largest designations on the market, 0.410-inch top and bottom for 1 rack unit, 0.680-inch top and bottom for 1.5 rack unit PPE Series Midsize Panels • New 1.4-inch straddle designation strip kit uses one strip for PPE series patchbays are designed to offer ADC performance on two panels, cutting designation strip labor in half a modest budget. Features include a rugged epoxy powder- coated steel faceplate with a durable molded ABS jack insert. PPE’s do not include rear silkscreening for port id, or cable support bars, but are available with the same jack options as the full-featured PPI series. The PPP1248-E90-HN is a Pro Patch Progammable bantam audio panel, 1 RU with 2x48 modular bantam jacks, rear EDAC 90-pin terminations, and half-normalled audio normalling. PPP1248-E90-HN EDAC 90 Pin, Half Normalled The PPE15232-MVJT-BK is a Pro Patch Enhanced midsize video The PPP1248-E3-HN is a Pro Patch Progammable bantam audio panel, 1.5 RU, black with 2 rows of 32 midsize jacks, MVJ-3 panel, 1 RU with 2x48 modular bantam jacks, rear EDAC 3-pin dual self-normalling super video with 75-Ohm termination. terminations, and half-normalled audio normalling. Includes designation strips. No cable management, with bent PPP1248-E3-HN EDAC 3-Pin, Half Normalled steel frame. Great ADC quality, but more economical than the PPI version. PPE15232-MVJT-BK 2.63” 2x32 MVJ-3T Jacks, 75 OHM Terminated, black This is just a small selection of the most popular ADC patchbays! We carry the complete ADC line! National Order Line: 24 Hour Fax Orderline: West Coast Sales & Service: have@haveinc.com 800-999-HAVE (4283) 518-828-2008 661-266-1624 store.haveinc.com
  • 64. Bulkhead Panels 65 Bulkhead Panels These great Canare bulkhead panels feature isolated BNC, RCA, F, or XLR all on the same panel, using either flush mount or standoff A/V Bulkhead Flush Mount & Standoff Panels style connectors. Made from strong 16 gauge cold rolled steel with top and bottom panel reinforcement folds, and with a matte black powder coat finish. Features also include tapped screw holes (flush mount) and Double-D hole punch (standoff) for connector mounts and clear plastic Desi-strips & channel ID numbers. These total quality panels are great for head ends, multimedia editing suites, master control rooms, or for satellite, telcom, and broadband uses. Flush Mount Style Blank Panels (unloaded) 2RU Bulkhead Panel CAN161U 1RU 16 Hole Flush Mount CAN322U 2RU 32 Hole Flush Mount CAN161U-DD 1RU 16 Hole Standoff CAN322U-DD 2RU 32 Hole Standoff Standoff Style 1RU Bulkhead Panel CANPBP0101 Blank plate for 161U and 322U Shop online! PANEL INFORMATION (LOADED PANELS) store.haveinc.com Model Height Panel Type Jack Qty. Jack Type CAN161U-BJRU 1RU Flush Mount 16 CANBNC-BNC CAN161U-RJRU 1RU Flush Mount 16 RCA-BNC Isolated BNC, RCA, F, XLR on the same panel, flush mount CAN161U-FJRU 1RU Flush Mount 16 F-F CAN161U-X1F 1RU Flush Mount 16 XLRF-Solder or standoff style connectors. See page 54 for Canare, CAN161U-X2F 1RU Flush Mount 16 XLRM-Solder BNC, RCA, and F receptacles. Neutrik “D” XLR receptacles CAN161U-X12F 1RU Flush Mount 8/8 XLRF/XLRM-Solder are on page 45. Canare IV-7/16 Isolation Bushings for CAN322U-BJRU 2RU Flush Mount 32 BNC-BNC standoff panels are available in black, blue, green, red, and CAN322U-RJRU 2RU Flush Mount 32 RCA-BNC yellow on page 53. CAN322U-FJRU 2RU Flush Mount 32 F-F CAN322U-X1F 2RU Flush Mount 32 XLRF-Solder BNC insertion/removal tools are available on pg 78 & 81 CAN322U-X2F 2RU Flush Mount 32 XLRM-Solder CAN322U-X12F 2RU Flush Mount 16/16 XLRF/XLRM-Solder CAN161U-BJR 1RU Standoff 16 BNC-BNC Barrel CAN161U-FJR 1RU Standoff 16 F-F Barrel CAN322U-BJR 2RU Standoff 32 BNC-BNC Barrel Winnie, Max, & Dexter say: CAN322U-FJR 2RU Standoff 32 F-F Barrel Please call for volume discounts! Shop online at store.haveinc.com or give us a cookie! CABC0705-9 National Order Line: 24 Hour Fax Orderline: West Coast Sales & Service: have@haveinc.com800-999-HAVE (4283) 518-828-2008 661-266-1624 store.haveinc.com
  • 65. 66 Mid-Size Video Patchbays Mid-Size Patch Panels 75Ω Mid-Size Video Jacks 75Ω Mid-Size Video Patchbays Mid-Size Dual Video Jacks NEW ! NEW ! At the heart of Canares new innovative Mid-Size Dual Video Jack is a specially designed rotary switch for use with high-frequency signals. It Features dual-contact construction for excellent contact stability. Canares new lightweight, high-density 32 channel Mid-Size video patchbay is ideal for mobile broadcast van applications. Equipped with CANMDVJW Normal through version. Return loss with BNC- newly developed 3GHz compatible (normal through) rotary switch BNC: 20dB or greater (up to 3.0GHz). Return loss with BNC- video jacks. Canares innovatively designed dual video jack requires no Video Patch Through: 18dB or greater (up to 2.4GHz). difficult to reach staggered offset output by reducing the size of their CANMDVJS Straight through version. Return loss with BNC- patch plug and BNC connectors. Video Patch Through: 18dB or greater (up to 2.4GHz). Return loss with BNC-Internal Terminator: 15dB or greater (up to • Panel Size: EIA Panel 1U 2.4GHz). • New 3GHz (normal through) rotary switch is more reliable • 32 channels of input & output into a 1U & 2U size panel • Lightweight aluminum alloy video jacks • Return loss with normal through BNC-BNC: 20dB or greater (up Patch Plugs to 3.0GHz) Mid-Size Video Patch Plugs • Return loss with normal through BNC-video patch through: 18dB NEW or greater (up to 2.4GHz) ! CAN32MD Normal through version. Signal routes between top and bottom BNC without the use of external looping plugs. Inserting a video patch cord into either front WE port auto- Canares new Mid-Size Video Patch Plug is designed specifically for use with matically terminates signal path into a 75Ω load. Canares their industry leading high-density Mid-Size Video Patchbay. most popular DVJ type. CANMVPC4 CAN32MDS Straight through version. Two independent single • Matching cable: LV61S, RG-59B/U jacks in a single housing. Inserting a video patch cord into • Return loss of 20dB or greater at DC-2.4GHz either front WE port breaks the 75Ω termination for a straight • Gold plated center contact pin pass through. Very useful for bringing up auxiliary equipment • Compatible with Canare Mid-Size video jacks to a designated central patchbay location. • Matching Canare boot: CANCB25 • Canare crimp die: CANTCD4C, CANTCD451A CANMVJDCBLA Mid-Size video jack dust cover, black CANMVJDCYEL Mid-Size video jack dust cover, yellow Adapters PROFlex Mid-Size Patch Cords are Mid-Size Patch Plug to BNC Adapter available on page 22! NEW ! CANBCJ-MVP Return loss of 26dB or greater at DC-3GHz 75Ω BNC to N Plug Adapter CANNCJBCJR BNC female to N female, uses Canare IU-7/16 isolation bushings. See page 53. See our Canare tool selection on page 78! National Order Line: 24 Hour Fax Orderline: West Coast Sales & Service: have@haveinc.com 800-999-HAVE (4283) 518-828-2008 661-266-1624 store.haveinc.com
  • 66. Video Patchbays 67 Patch Panels 75Ω Digital Video Jacks and Plugs 75Ω Digital Video Patchbays Dual Video Jacks 2RU Patchbay • Loaded panels feature Canare 75Ω Dual Video Jacks The DVJ-W routes the signal between top and bottom BNC without the • Easy accessibility. Connectors load from the rear but attach to the front use of external looping plugs. Inserting a Canare VPC or PROFlex Video • Sealed microswitch circuit contacts for rugged long-term performance Patch Cord into either front WE port automatically terminates signal • Extended contact life of over 300,000 insertion cycles path into a 75Ω load. The DVJ-S is two independent single jacks in a dual housing. Inserting a Canare VPC or PROFlex Video Patch Cord into Each panel is machined from a single block of 19" wide lightweight either front WE port breaks the 75Ω termination for straight signal pass phenolic material. A smooth textured black suede laminate is applied to through. the front face for a durable non-scratch surface and enhanced rack appearance. All jacks mount from the back, but attach to the front for CANDVJ-W Normal through quick, efficient, and easy access for servicing and module exchange. No CANDVJ-S Straight through more hassles with long screwdrivers behind the rack bay! CANVJ-DC Dust cap for DVJ ports Looping Plug Perfect for serial digital and other high bandwidth applications. These patchbays can also be ordered with all DVJ-S jacks. Partially loaded or with combination Normal/Straight jacks are available, call for pricing. PANEL INFORMATION New 75Ω U-Link is the perfect way to quickly manually normal the Loaded Rack Circuit Row Jack Blank input & output on Canares DVJ-S. 1.5GHz (>20dB Return Loss) Panel Height Type Config. Model Panel impedance matched performance. Available in black, blue, brown,CAN201UDVJAW* 1RU Normal 2x20 DVJ-W VJ2-E20 gray, green, orange, purple, red, white, & yellow.CAN241UDVJAW* 1RU Normal 2x24 DVJ-W VJ2-L24-1U CANLP-1 Looping plugCAN261UDVJAW* 1RU Normal 2x26 DVJ-W VJ2-L26-1UCAN242UDVJAW* 2RU Normal 2x24 DVJ-W VJ2-L24-2U 75Ω WE Video Patch PlugsCAN262UDVJAW* 2RU Normal 2x26 DVJ-W VJ2-L26-2UCAN244UDVJAW* 4RU Normal 2x24 DVJ-W VJ2-E24-4UCAN264UDVJAW* 4RU Normal 2x26 DVJ-W VJ2-E26-4U*Substitute S for W for straight through DVJ ciruit type. Please call for volume discounts! The VWP-C4A is DC to 1.5GHz >20dB Return Loss, matches the electrical and mechanical performance of Canares DVJ-W and DVJ-S Digital Video Jacks. WE (WE.090") gold plated center contact is also compatible with older Canare VWJ2 series Video Jacks. Solder pin, crimp sleeve. The BCJ-VWP is DC to 1.5GHz >20dB Return Loss. WE (WE.090") gold plated center contact pin. Video patch to 75Ω BNC female jack. For use with any Canare BNC Broadcast Video Patch Cords. CABC0705-9 CANVWP-C4A Crimp plug CANBCJ-VWP Patch plug/BNC adapter Shop online! store.haveinc.com Panels in action with HAVEFlex & PROFlex patchcords National Order Line: 24 Hour Fax Orderline: West Coast Sales & Service: have@haveinc.com 800-999-HAVE (4283) 518-828-2008 661-266-1624 store.haveinc.com
  • 67. 68 Video Panels Super HD+ Series Video Panels AVP’s newest Video Jack series and panels are designed for Midsize from AVP! today’s HDTV demands. Super HD+ Dual Video Jacks exceed SMPTE 292M-1998 HDTV specifications. Both Fullsize and Midsize Video Panels - Super HD+ 3.0GHz Jacks Midsize 3.0GHz Jacks are available, and all are compatible with AVP’s exclusive Captive Screw System. Panels are available in both 1RU and 2RU configurations, with the 2RU panel having extra large designation strips. Features include: • AVP’s fullsize 3.0GHz or 1.75GHz, and midsize 3.0GHz Dual Video Jacks are available, in normaled or non-normaled configurations. All 75Ω. • All video jacks offer life cycle rating of 30,000, and are made AVPAVD232E1AMN75 2x32 captive screw panel, 1RU with and assembled in the USA. 32 AMN75 3.0GHZ midsize normaled, terminating jacks • Fullsize versions offer 2x24 inputs, midsize versions offer AVPAVD232E2AMN75 2x32 captive screw panel, 2RU with compact 2x32 inputs 32 AMN75 3.0GHZ midsize normaled, terminating jacks • AVP captive screw system: Easy front of the panel assembly AVPAVD232E1AM75 2x32 captive screw panel, 1RU with 32 and re-arrangement. AM75 3.0GHZ midsize non-normaled, terminating jacks • AVP color identification system. Green jacks, non-normaled. AVPAVD232E2AM75 2x32 captive screw panel, 2RU with 32 Red jacks, normaled. AM75 3.0GHZ midsize non-mormaled, terminating jacks • AVP video panels also accept AVP longframe audio jacks Full Size Video Panels - Super HD+ 3.0GHz Jacks Full Size Video Panels - Super HD+ 1.75GHz Jacks AVPAVC224E1ASN7511 2x24 captive screw panel, 1RU with AVPAVC224E1AN7511 2x24 Captive Screw Panel, 1RU with 24 24 ASN7511 3.0GHZ normaled, terminating jacks AN7511 1.75GHz normaled, terminating jacks AVPAVC224E2ASN7511 2x24 captive screw panel, 2RU with AVPAVC224E2AN7511 2x24 Captive Screw Panel, 2RU with 24 24 ASN7511 3.0GHz normaled, terminating jacks ASN7511 1.75GHz normaled terminating jacks AVPAVC224E1AS7511 2x24 captive screw panel, 1RU with 24 AVPAVC224E1A7511 2x24 Captive Screw Panel, 1RU with 24 AS7511 3.0GHz non-normaled, terminating jacks AN7511 1.75GHz non-normaled, terminating jacks AVPAVC224E2AS7511 2x24 captive screw panel, 2RU with 24 AVPAVC224E2A7511 2x24 Captive Screw Panel, 2RU with 24 ASN7511 3.0GHz normaled terminating jacks AN7511 1.75GHz non-normaled, terminating jacks Need tools? See our selection starting on page 78. Also, don’t forget our HAVEFlex patchcords on page 11 and our racks starting on page 70! Blank (Empty) Panels Full Size Blank Video Panels Midsize Blank Video Panels Load your own quality AVP video patchbays with your choice of Load your own quality AVP midsize video patchbays with your choice video jackfields. 1RU: 1.75" H, 2RU: 3.5" H of midsize video jackfields (see pg 19). 1RU: 1.75" H, 2RU: 3.5" H AVPAVC224E1Z 2x24 captive screw panel, 1RU, empty AVPAVD232E1Z 2x32 captive screw panel, 1RU, empty AVPAVC224E2Z 2x24 captive screw panel, 2RU, empty AVPAVD232E2Z 2x32 captive screw panel, 2RU, empty National Order Line: 24 Hour Fax Orderline: West Coast Sales & Service: have@haveinc.com 800-999-HAVE (4283) 518-828-2008 661-266-1624 store.haveinc.com
  • 68. Universal Panels & Video Jacks 69 Universal Bulkhead Panel System AVP’s Universal Bulkhead Panels are total quality and infinitely configurable. You decide the connector number and configuration that works best for you! AVPWKU116E1Z 1 RU 1x16 • Design your own bulkhead • Extensive selection of connector kits (see below) • Heavy-duty rigid phenolic panels • Attractive textured black semi-gloss finish • Strain relief cable bar is standard on all models • 1RU and 2RU, 16 & 12 position available AVPWKU216E2Z 2RU, 2x16 Universal Panel (no connectors) AVPWKU116E1Z 1RU, 1x16 Universal Panel (no connectors) AVPWKU212E2Z 2RU, 2x12 Universal Panel (no connectors) AVPWKU112E1Z 1RU, 1x12 Universal Panel (no connectors) AVPUCP Universal Cover Plate, Black, with hardware to AVPWKU212E2Z 2 RU 2x12 cover one position AVP CONNECTOR KITS Part Description Part Description Number Number AVPUCP Blank Cover Plate, hardware AVPUDB9-SM DB9 Male, solder, adapter plate(s), hardware AVPURJ45-5E RJ45 CAT5E, tool-less termination, adaptor plate(s), hardware AVPUDB9-SF DB9 Female, solder, adapter plate(s), hardware AVPURJ11 RJ11 6 Pos/ 6 Conductor, IDC interface, adaptor plate(s), hardware AVPUNN320 N Style Feedthrough, adaptor plate(s), hardware AVPUB3-M Banana Jack Triad AVPUNX331 XLR 3 Pin, female, panel mount, hardware AVPUBP1-S Binding Post, standard size, single (green), adaptor plate(s), hardware AVPUNY331 XLR 3 Pin, male, panel mount, hardware AVPUBP2-S Binding Post, standard size, double (red, black), adaptor plate(s), hardware AVPUNX330 XLR 3 Pin, female, black/gold, panel mount, hardware AVPUSVHS-4G SVHS Feedthrough, 4 pin, gold contacts, adaptor plate(s), hardware AVPUNY330 XLR 3 Pin, male, black/gold, panel mount, hardware AVPUSVHS-4N SVHS Feedthrough, 4 pin, nickel contacts, adaptor plate(s), hardware AVPUHF310 F Style Feedthrough, adaptor plate(s), hardware AVPURCA-W RCA Feedthrough, white, adaptor plate(s), hardware AVPUFJ310R F Style Feedthrough, recessed, adaptor plate(s), hardware AVPURCA-R RCA Feedthrough, red, adaptor plate(s), hardware AVPUJJ300 BNC Feedthrough, 3 GHz, AVP JJ300, adaptor plate(s), hardware AVPURCA-Y RCA Feedthrough, yellow, adaptor plate(s), hardware AVPUE3R-C EDAC AVPUJJ300R BNC Feedthrough, 3 GHz, AVP JJ300, recessed, adaptor plate(s), hardware AVPUNL2MP Speakon Connector, 2-Pole, panel mount, hardware AVPUSC-O SC MM Bulkhead, adaptor plate(s), hardware AVPUNL4MP Speakon Connector, 4-Pole, panel mount, hardware AVPUSPJ 1/4" Stereo Phone Jack, panel mount, hardware AVPUNL4MP-B Speakon Connector, 4-Pole, black/gold, panel mount, hardware AVPUB3-M Banana Jack Triad (3), adapter plate(s), hardware AVPUE3R-C 3 Pin EDAC Receptacle with crimp pins, adaptor plate(s), hardware AVPUDB9-CM DB9 Male, pin contacts - crimp, adapter plate(s), hardware AVPUE3R-S 3 Pin EDAC Receptacle with solder pins, adaptor plate(s), hardware AVPUDB9-CF DB9 Female, socket contacts - crimp, adapter plate(s), hardware AVPUHF310 F Super HD Series Dual Video Jackfields AVP’s Super HD+ fullsize and midsize dual video jacks offer We carry the full line of AVP products - call with your needs! complete solutions for HDTV. • All Super HD+ Dual Video Jacks exceed SMPTE 292M-1998 HDTV specifications and are all 3.0GHz. • Fullsize Super HD+ 1.75GHz jacks are a lower cost, high performance alternative Shop online! • All with life cycle rating of 30,000 store.haveinc.com • All made and assembled in the USA Super HD+ Full Size CABC0705-9 Super HD+ Midsize AVPASN7511 3.0GHz normaled terminating AVPAS7511 3.0GHz non-normaled terminating AVPASN11 3.0GHz normaled non-terminating AVPAM75 3.0GHz non-normaled terminating AVPAS11 3.0GHz non-normaled non-terminating AVPAMN75 3.0GHz normaled terminating AVPAN7511 1.75GHz normaled terminating AVPAM 3.0GHz non-normaled non-terminating AVPA7511 1.75GHz non-normaled terminating AVPAMN 3.0GHz normaled non-terminating National Order Line: 24 Hour Fax Orderline: West Coast Sales & Service: have@haveinc.com800-999-HAVE (4283) 518-828-2008 661-266-1624 store.haveinc.com
  • 69. 70 Middle Atlantic Racks MRK Series ERK Series Specify an MRK Series 19” Gangable rack enclosure from Middle Specify an ERK Series 19” rack enclosure from Middle Atlantic when Atlantic when multiple racks need to be joined, or when open sides are economy is required and solid sides are preferable. ERK provides desirable for easy access to cables and components. Slim, space saving unparalleled quality at an aggressive price! design is ideal when floor space is an issue. Fully welded construction combined with 16-gauge steel tops, Fully welded, the MRK series is enhanced by a wider rackrail that bottoms, and sides, provides a 2,500 lb. Weight capacity. provides more room inside than any other rack of this type. • 22” Outside width. Available in 2 outside depths, 20” or 25” • 22” Outside width. Available in 3 outside depths, 26.5”, 31.5” • Fully welded 16-gauge steel tops, bottoms, and sides and 36” • 2,500 lb. Weight capacity • Fully welded 14-gauge steel tops & bottoms (open), 16-gauge • 11-gauge, 10-32 threaded rackrails seamless steel sides (open) with 11-gauge thickness where the • Removable rear plates allow cable bundles to be easily passed rail brackets are welded over or under the ERK standard key-locking rear door • Configurable open top accepts a number of thermal manage- • Superior ventilation, front and side vents optimize heat convection ment options • Grounding and bonding stud mounted in base • All models equipped with laser-cut 1/8th” thick internal braces • Add-A-Bay™ Feature. Laser KO’s in side panels provide cable pass- made from structural steel throughs and ganging holes allow ERK’s to be used in multi-bay • 2,500 lb. Weight capacity configurations without drilling. (35, 40, 44 space models only) • Standard front and rear adjustable 11-gauge, 10-32 threaded wide • Finished in a durable black textured powder coat rackrails with numbered increments to speed equipment mounting • Ships fully assembled • Removable rear plates allow cable bundles to be easily passed over or under the MRK’s standard key-locking rear door Need special enclosures? We can help you with • Finished in a durable black textured powder coat choosing or designing your Middle Atlantic set-ups! • Ships fully assembled We carry the entire Middle Atlantic line! MIDMRK4426 MIDMRK4436 MIDERK4425 series Choose ERK hen &w K series for economy eded Choose MR or solid sides a re ne s for open side joining racks! ERK & MRK Series RacksM Rack Solid Plexi Vented Steel Side Vertical Vented Solid Fan Skirted Additional Racking Overall Useable Overall Overall Door Door Door Panels Pwr Strip Top Top Top Wheelbase Rackrail Height Height Depth Depth Width MIDERK1820 MIDFD18 MIDPFD18 MIDVFD18 S, XS MIDCBSERK20 MIDERKRR18 31.5"(18 SPACE) 35.625" 18.475" 20" 22" MIDERK1825 MIDFD18 MIDPFD18 MIDVFD18 S, XS MIDCBSERK25 MIDERKRR18 31.5"(18 SPACE) 35.625" 23.475" 25" 22" MIDERK2120 MIDFD21 MIDPFD21 MIDVFD21 S MIDCBSERK20 MIDERKRR21 36.75"(21 SPACE) 40.875" 18.475" 20" 22" MIDERK2125 MIDFD21 MIDPFD21 MIDVFD21 S MIDCBSERK25 MIDERKRR21 36.75"(21 SPACE) 40.875" 23.475" 25" 22" MIDERK2720 MIDFD27 MIDPFD27 MIDVFD27 M,S MIDCBSERK20 MIDERKRR27 47.5"(27 SPACE) 51.375" 18.475" 20" 22" MIDERK2725 MIDFD27 MIDPFD27 MIDVFD27 M,S MIDCBSERK25 MIDERKRR27 47.5"(27 SPACE) 51.375" 23.475" 25" 22" MIDERK3520 MIDFD35 MIDPFD35 MIDVFD35 L,M,S MIDERKVT MIDERKST Available* MIDCBSERK20 MIDERKRR35 61.25"(35 SPACE) 65.375" 18.475" 20" 22" MIDERK3525 MIDFD35 MIDPFD35 MIDVFD35 L,M,S MIDERKVT MIDERKST Available* MIDCBDERK25 MIDERKRR35 61.25"(35 SPACE) 65.375" 23.475" 25" 22" MIDERK4020 MIDFD40 MIDPFD40 MIDVFD40 L,M,S,XS MIDERKVT MIDERKST Available* MIDCBSERK20 MIDERKRR40 70"(40 SPACE) 74.125" 18.475" 20" 22" MIDERK4025 MIDFD40 MIDPFD40 MIDVFD40 L,M,S,XS MIDERKVT MIDERKST Available* MIDCBSERK25 MIDERKRR40 70"(40 SPACE) 74.125" 23.475" 25" 22" MIDERK4420 MIDFD44 MIDPFD44 MIDVFD44 L,S MIDERKVT MIDERKST Available* MIDCBSERK20 MIDERKRR44 77"(44 SPACE) 81.125" 18.475" 20" 22" MIDERK4425 MIDFD44 MIDPFD44 MIDVFD44 L,S MIDERKVT MIDERKST Available* MIDCBSERK25 MIDERKRR44 77"(44 SPACE) 81.125" 23.475" 25" 22" MIDMRK2426 MIDFD24 MIDPFD24 MIDVFD24 MIDSPN24267 M,S MIDMWVT MIDMWST Available** MIDCBSMRK26 MIDMVRR24 42"(24 SPACE) 48.125" 24" 26.5" 22" MIDMRK2431 MIDFD24 MIDPFD24 MIDVFD24 MIDSPN24312 M,S MIDMWVT MIDMWST Available** MIDCBSMRK31 MIDMVRR24 42"(24 SPACE) 48.125" 29" 31.5" 22" MIDMRK3726 MIDFD37 MIDPFD37 MIDVFD37 MIDSPN37267 L,S,XS MIDMWVT MIDMWST Available** MIDCBSMRK26 MIDMVRR37 64.75"(37 SPACE) 70.875" 24" 26.5" 22" MIDMRK3731 MIDFD37 MIDPFD37 MIDVFD37 MIDSPN37312 L,S,XS MIDMWVT MIDMWST Available** MIDCBSMRK31 MIDMVRR37 64.75"(37 SPACE) 70.875" 29" 31.5" 22" MIDMRK4026 MIDFD40 MIDPFD40 MIDVFD40 MIDSPN40267 L,M,S,XS MIDMWVT MIDMWST Available** MIDCBSMRK26 MIDMVRR40 70"(40 SPACE) 76.125" 24" 26.5" 22" MIDMRK4031 MIDFD40 MIDPFD40 MIDVFD40 MIDSPN40312 L,M,S,XS MIDMWVT MIDMWST Available** MIDCBSMRK31 MIDMVRR40 70"(40 SPACE) 76.125" 29" 31.5" 22" MIDMRK4426 MIDFD44 MIDPFD44 MIDVFD44 MIDSPN44267 L,S MIDMWVT MIDMWST Available** MIDCBSMRK26 MIDMVRR40 77"(44 SPACE) 83.125" 24" 26.5" 22" MIDMRK4431 MIDFD44 MIDPFD44 MIDVFD44 MIDSPN44312 L,S MIDMWVT MIDMWST Available** MIDCBSMRK31 MIDMVRR44 77"(44 SPACE) 83.125" 29" 31.5" 22" MIDMRK4436 MIDFD44 MIDPFD44 MIDVFD44 MIDSPN4436 L,S MIDMWVT MIDMWST Available** MIDCBSMRK36 MIDMVRR44 77"(44 SPACE) 83.125" 33.6" 36" 22" MIDMRK4436PRO MIDFD44 MIDPFD44 MIDVFD44 MIDSPN4436 L,S MIDMWVT MIDMWST Available** MIDCBSMRK36 MIDMVRR44 77"(44 SPACE) 83.125" 33.6" 36" 22" *MIDERK10FT & MIDERK4FT **MIDMW10FT & MIDMW4FT National Order Line: 24 Hour Fax Orderline: West Coast Sales & Service: have@haveinc.com 800-999-HAVE (4283) 518-828-2008 661-266-1624 store.haveinc.com
  • 70. Middle Atlantic Racks & Power Products 71 RK Series Middle Atlantics RK/BRK series of 19” equipment racks prove that high quality and cost effectiveness are not mutually exclusive. RK/BRK’s are modular, studio-grade components well suited for any permanent installation. Constructed with 5/8th” furniture grade MDF board, each black laminated rack assembles easily with provided allen wrench and driver bit. 11-gauge, 10-32 threaded front rackrail comes preinstalled. Add a castor kit for mobility, or simply use feet provided for stationary applications. Two depths are offered, 16” and 18”. MIDRK2 16”D; 3.5” (2 space) rack height; 5” overall height MIDRK4 16”D; 7” (4 space) rack height; 8.5” overall height MIDRK8 16”D; 14” (8 space) rack height; 15.5” overall height MIDRK12 16”D; 21” (12 space) rack height; 22.5” overall height MIDRK16 16”D; 28” (16 space) rack height; 29.5” overall height MIDRK20 16”D; 35” (20 space) rack height; 36.5” overall height MIDBRK8 18”D; 14” (8 space) rack height; 15.5” overall height MIDBRK12 18”D; 21” (12 space) rack height; 22.5” overall height MIDBRK16 18”D; 28” (16 space) rack height; 29.5” overall height MIDBRK20 18”D; 35” (20 space) rack height; 36.5” overall height MIDRKW Wheel kit – 4 wheels, 2 are locking. (adds 2.75” to height) Power Products Middle Atlantics PD Vertical Power Series is a comprehen- sive line of power strips pre-configured in 4 different sizes. • Stock PD series strips can satisfy many power require- Serial Digital CableM Part ID Fits Racks Circuit Termination Protection # of OD ments right off the shelf Coded Outlets Length • Multiple circuit, amperage and termination choices MIDPD615C S 15 AMP (1) Cord w/NEMA 5-15P Plug Mov Surge+EMI Filter+Breaker 6 26.5" MIDPD615CNS S 15 AMP (1) Cord w/NEMA 5-15P Plug Circuit Breaker 6 26.5" • Termination choices include: cord with plug, metal flex MIDPD620CNS S 20 AMP (1) Cord w/NEMA 5-20P Plug Circuit Breaker 6 26.5" with tails, or J-Box MIDPD620JIG S 20 AMP ISO GROUND (1) J Box None 6 30.5" MIDPD1215JS S 15 AMP (1) J Box None 12 30.5" • UL Listed in the US and Canada MIDPD1015C M 15 AMP (1) Cord w/NEMA 5-15P Plug Mov Surge+EMI Filter+Breaker 10 40" • All are constructed from 16-gauge steel, finished in a MIDPD1015CNS M 15 AMP (1) Cord w/NEMA 5-15P Plug Circuit Breaker 10 40" durable black powder coat MIDPD1020CNS MIDPD1020JIG M M 20 AMP (1) 20 AMP ISO GROUND (1) Cord w/NEMA 5-20P Plug J Box Circuit Breaker None 10 10 40" 44" • All feature unique mounting lances and quick-clips, and MIDPD1215 L 15 AMP (1) 3 Flex w/8" Tails None 12 57" are engineered to attach to the rackrail brackets of all MIDPD1220CNS L 20 AMP (1) Cord w/NEMA 5-20P Plug Circuit Breaker 12 57" MIDPD1220J L 20 AMP (1) J Box None 12 61" Middle Atlantic welded racks MIDPD1220JIG L 20 AMP ISO GROUND (1) J Box None 12 61" MIDPD1415C L 15 AMP (1) Cord w/NEMA 5-15P Plug Mov Surge+EMI Filter+Breaker 14 57" MIDPD1415CNS L 15 AMP (1) Cord w/NEMA 5-15P Plug Circuit Breaker 14 57" MIDPD2X615 L 15 AMP (2) 3 Flex w/8" Tails None 12 57" MIDPD2X620J L 20 AMP (2) J Box None 12 61" Rackmount Power Products PD-915R PDS-615R CABC0705-9 The PD-915R rackmount power distribution unit has 8 rear outlets The PDS-615R rackmount power distribution unit provides 6-step and 1 front outlet. Surge and spike protection is standard, as well sequencing to 6 rear outlets. Adjustable start time delay allows as EMI filtering and a 9’ cord. A generous 9” depth provides easy daisy-chaining of up to 3 PDS-615Rs to act as a single 18 step access to the 15 AMP rear panel outlets, solidly mounted to prevent unit. Sequencing intervals are facilitated via front of panel deflection. An illuminated power switch / circuit breaker is located controls and LED indicators. Also 9” deep and includes a 9’ cord. on the front panel. Black powder coat finish. 1RU high. Black powder coat finish. 1RU high. MIDPD915R Rackmount Power Unit, 15 AMP circuit, 9 outlets MIDPDS615R Rackmount Sequencing Power Unit, 15 AMP (8 rear, 1 front) circuit, 6 rear sequenced outlets National Order Line: 24 Hour Fax Orderline: West Coast Sales & Service: have@haveinc.com800-999-HAVE (4283) 518-828-2008 661-266-1624 store.haveinc.com
  • 71. 72 Middle Atlantic Rack Options, Shelves, & Drawers Universal Enclosure Options Rackmount Storage & Shelves Vertical Lacer Strips UD Series Drawers Highly perforated steel lacer strips mount vertically to rackrail UD Series drawers offer an economical rack storage solution. Full brackets and provide holes for cable ties. Lacer strips can easily extension ball bearing slides smoothly and extend a full 14” to be cut down to smaller sizes. NEW wide 3 ½” versions are now reveal inside dimensions of 15 7/8” w by 14 ½” d. Each comes available in 37 and 44 space heights. Lacer strips sold in packs of with face mounted pull, and finished in black powder coat. A 6, tie saddles come in packs of 9. user-installed latch and keylock are available as well. MIDLACE44LP 3 ½”, 44 space; generous bridge lances for MIDUD2 3 ½” (2 space) hook and loop cable fasteners and cable ties MIDUD3 5 ¼” (3 space) MIDLACE37LP 3 ½”, 37 space; generous bridge lances for MIDUD4 7” (4 space) hook and loop cable Fasteners and cable ties MIDLATCH user installed UD drawer latch MIDLACEP 2”, 44 space MIDKYLK user installed UD drawer keylock MIDLACE37P 2”, 37 space MIDLACE441P 1”, 44 space; tapped for tie saddles Heavy-Duty Sliding Shelf MIDLACE371P 1”, 37 space; tapped for tie saddles MIDTS9 9 tie saddles and hardware Horizontal Lacer Bars MIDLBP-1S MIDLBP-4A Featuring heavy-duty 16-gauge steel construction with a 50 lb. MIDLBP-1R Weight capacity for rugged functionality. Capable of latching in an open or closed position and sliding on ball bearings, this shelf MIDLBP-1R4 extends a full 14”. Occupies slightly more than a single rackspace. Fits in racks with a minimum 14 ¾” useable depth. The economical and effective way to manage cable horizontally. MIDSS 17 ½”W x 14 ¾”D; 50 lbs. capacity Made from ¼” diameter rod with flattened ends or 3/16” thick aluminum, finished in a black powder coat. Or “L” shaped steel with special coating to protect cable, available straight or in new Universal Rackshelves offset shapes. Each bar provides convenient cable tie points. Lacer bars sold in packs of 10. MIDLBP-1R Round Rod; 19” panel width MIDLBP-1S Rectangular Bar; 19” panel width MIDLBP-1A “L” Bar; 19” panel width MIDLBP-1A-23 “L” Bar; 23” panel width These easy-to-install shelves fit all components up to 17 3/8” MIDLBP-2A “L” Bar, 2” offset; 19” panel width wide, to fit ALL your rackmounting needs. Made from 16-gauge MIDLBP-4A “L” Bar, 4” offset; 19” panel width steel and finished in a durable black powder coat. MIDLBP-6A “L” Bar, 6” offset; 19” panel width MIDU1 1 ¾” (1 space)H x 11”D; 35 lbs. capacity MIDLBP-1.5 1 ½”” offset round rod; 19” panel width MIDU2 3 ½” (2 space)H x 14 ¾”D; 50 lbs. capacity MIDLBP-1R4 4” offset round rod; 19” panel width MIDU3 5 ¼” (3 space)H x 14 ¾”D; 70 lbs. capacity MIDU4 7” (4 space)H x 15 ½”D; 85 lbs. capacity Leveling Feet Clamping Rackshelves Adjustable leveling feet fit all Middle Atlantic steel racks and enclosures. Flat-blade and hex drive allows for adjustment. Economical and functional shelves for components that require Leveling feet also work with Middle Atlantic castor bases for the captivation. Equipped with rubber lined clamps that secure compo- MRK series racks. Raises enclosure from 1/8” to 1” off floor. nents from the top, and adjustable “L” brackets secure from the back. Sold in sets of 4. Vented bottoms, 16-gauge steel and durable black powder coat finish. MIDLF Middle Atlantic Leveling Feet set of 4 MIDRC2 3 ½” (2 space)H x 15 ½”D; 1” – 2 3/4” clamping range MIDRC3 5 ¼” (3 space)H x 15 ½”D; 2 ¾” – 4 5/8” clamping range MIDRC4 7” 5 space)H x 15 ½”D; 4 ½” – 6 3/8” clamping range National Order Line: 24 Hour Fax Orderline: West Coast Sales & Service: have@haveinc.com 800-999-HAVE (4283) 518-828-2008 661-266-1624 store.haveinc.com
  • 72. Middle Atlantic Cooling, Panels, & Hardware 73 Rackmount Cooling Products Rack Screws & Hardware Quiet Fan Panels 10/32 Rack Screws Quiet Fan Panels occupy 3 rackspaces and provide quiet cooling • Philips Truss or Trim Head design for demanding environments. Each assembly comes complete • ¾” long with fans and grills installed. Finished in black brushed and • Self-guiding pilot point anodized finish. Cord and plug included. • Factory installed nylon washers MIDQFP1 5 ¼” (3 space) height; <30 dBA; One fan • Heat treated to resist stripping MIDQFP2 5 ¼” (3 space) height; <33 dBA; Two fans • Black oxide finish MIDHP500 Truss 10/32 size; 500 pc. (includes reusable storage jar) Fans MIDHP Truss 10/32 size; 100 pieces Featuring smooth ball bearing design. QFAN quiet fan includes a MIDHW100 Trim 10/32 size; 100 pieces black powder coat finish guard and is great for minimizing noise. Order GUARD-10 for the FAN10 model. Hardware and cord are included with each unit. 12/24 Rack Screws Also heated treated and equipped with captive nylon washers, MIDQFAN 4 ½””; <30 dBA; 50 free air CFM these 12/24 thread, 5/8” long screws are primarily used in MIDFAN10 10”; 46 dBA; 550 free air CFM telecommunications and data. MIDGUARD10 Chrome finish 10” fan guard for MIDFAN10 fan MIDHP24 12/24 thread; 100 pieces; black oxide finish We carry the full line of Middle Atlantic Blank Panels products! HBL/CHBL Series Aesthetically pleasing 11-gauge aluminum construction and your choice of black or silver brushed anodized finish. These blank panels are designed to be EASY to machine. MIDHBL2 MIDHBL1 Black Anodized; 1 ¾” (1 space) height MIDCHBL1 Silver Anodized; 1 ¾” (1 space) height MIDHBL2 Black Anodized; 3 ½” (2 space) height MIDCHBL2 Silver Anodized; 3 ½” (2 space) height MIDHBL3 Black Anodized; 5 ¼” (3 space) height MIDEVT2 MIDCHBL3 Silver Anodized; 5 ¼” (3 space) height MIDHBL4 Black Anodized; 7” (4 space) height MIDCHBL4 Silver Anodized; 7” (4 space) height MIDHBL5 Black Anodized; 8 ¾” (5 space) height MIDCHBL5 Silver Anodized; 8 ¾” (5 space) height MIDHBL6 Black Anodized; 10 ½” (6 space) height CABC0705-9 MIDEVTC2 MIDCHBL6 Silver Anodized; 10 ½” (6 space) height SB Series EVT Vent Panels Textured black powder coat finish, flanged for extra strength, and Nice looking vertical slotted design, and available either in black 16-gauge steel. What more could you ask for? powder coat or brushed anodized black or silver aluminum. MIDSB1 1 ¾” (1 space) height MIDEVT1 Black Powder Coat; 1 ¾” (1 space) height MIDSB2 3 ½” (2 space) height MIDEVTA1 Black Anodized; 1 ¾” (1 space) height MIDSB3 5 ¼” (3 space) height MIDEVTC1 Silver Anodized; 1 ¾” (1 space) height MIDSB4 7” (4 space) height MIDEVT2 Black Powder Coat; 3 ½” (2 space) height MIDSB5 8 ¾” (5 space) height MIDEVTA2 Black Anodized; 3 ½” (2 space) height MIDSB6 10 ½” (6 space) height MIDEVTC2 Silver Anodized; 3 ½” (2 space) height National Order Line: 24 Hour Fax Orderline: West Coast Sales & Service: have@haveinc.com800-999-HAVE (4283) 518-828-2008 661-266-1624 store.haveinc.com
  • 73. 74 Middle Atlantic Modular Systems UCP Modular Custom Panel Systems 1/4", 3/8”, & 7/16” Diameter Punchouts Build your own Custom Connector Panel! This modular system assembles easily and quickly using either a 2 or 4 space frame kit and your choices of an extensive collection of prepunched modules. All you have to do then is select the connectors to install in the finished panel! A single tier of 5 modules bolt across a 2 space 1/4” fits RCA jacks, some switches and LEDs. 3/8” fits phone frame kit, and two tiers of 5 modules bolt across a 4 space frame jacks, attenuators, "F" connectors, some switches. 7/16” fits kit. All visible parts have a black brushed and anodized finish. Switchcraft #11, insulated phone jacks, some switches. Frame Kits MID1/4X2 Has 2 1/4" diameter holes MID1/4X4 Has 4 1/4" diameter holes MID3/8X1 Has 1 3/8" diameter hole MID3/8X2 Has 2 3/8" diameter holes MID3/8X4 Has 4 3/8" diameter holes MID3/8X6 Has 6 3/8" diameter holes Frame kits consist of top and side rails, with hardware to MID3/8X8 Has 8 3/8" diameter holes assemble. MID7/16X4 Has 4 7/16" diameter holes ----------------------------------------------------------- ---------------------------------------------------------- MIDFK2 3 ½” (2 space) Racking Height BNC Punchouts MIDFK4 7” (4 space) Racking Height ----------------------------------------------------------- ---------------------------------------------------------- Blank Modules Available for filling unused spots or drill your own connector mounting pattern. Fits 1/2" and 3/8" diameter BNC shells, most insulated shells and MIDUCPB1 Single width; ¼” thick aluminum fuses MIDUCPB2 Double width; ¼” thick aluminum MIDUCPB3 Triple width; ¼” thick aluminum MID1/2BNC1 Fits 1 1/2" BNC ----------------------------------------------------------- ---------------------------------------------------------- MID1/2BNC2 Fits 2 1/2" BNCs Universal XLR Punchouts MID1/2BNC3 Fits 3 1/2" BNCs MID1/2BNC4 Fits 4 1/2" BNCs MID3/8BNC4 Fits 4 3/8" BNCs ----------------------------------------------------------- ---------------------------------------------------------- Canare BNC Punchouts MIDUNIV series fits Neutrik FP, MP, MDL, FDL, small Speakon, Switchcraft (male XLRs fit as well but leave a small gap on sides). MIDXLRM6 fits Neutrik MP, LNEMP, Switchcraft, & Cannon. MIDUNIV1 Fits 1 XLR Female Fits regular and feedthrough type Canare BNCs. MIDUNIV2 Fits 2 XLR Females MIDUNIV3 Fits 3 XLR Females MIDCANARE4 Fits 4 Canare BNCs MIDUNIV4 Fits 4 XLR Females ----------------------------------------------------------- ---------------------------------------------------------- MIDUNIV6 Fits 6 XLR Females UCP Chassis MIDXLRM6 Fits 6 XLR Males ----------------------------------------------------------- ---------------------------------------------------------- "DB" Style Punchouts 2 space chassis holds 5 modules in the front and 5 modules in the rear. Shipped fully-assembled, each unit is comprised of four threaded FK bars, a pair of ears 9" deep, top and bottom, Fits the popular data multipin. and all necessary module mounting hardware. The top & bottom can be easily removed, leaving the frame intact. MID1DB9 Fits 1 DB9 MID2DB9 Fits 2 DB9s MIDUCP-CH MID3DB9 Fits 3 DB9s ----------------------------------------------------------- ---------------------------------------------------------- MID4DB9 Fits 4 DB9s UCP Cable Tray MID2DB37 Fits 2 DB37s Includes FK2 bars and mounting ears. 5" deep tray provides MID1DB15 Fits 1 DB15 superior cable strain relief with a multitude of wire-tie slots. MID2DB15 Fits 2 DB15s MID1DB25 Fits 1 DB25 MIDUCP-CT MID2DB25 Fits 2 DB25s MID2DB50 Fits 2 DB50s National Order Line: 24 Hour Fax Orderline: West Coast Sales & Service: have@haveinc.com 800-999-HAVE (4283) 518-828-2008 661-266-1624 store.haveinc.com
  • 74. HAVE Custom Wall Plates & Junction Boxes 75 Custom Wall Plates Audio & Video Wall Plates HAVE can build any configuration of wall plate that you can imagine, and unlike our standard stainless and anodized wall plates on the previous page, with HAVE Custom you can get many additional styles and materials like: • Stainless Steel (ST), Polished Brass (PB), Satin Brass (SB), Antique "Statuary" Bronze (AZ), Bank Bronze (BZ), Satin Bronze (SZ), and Mirror Chrome (MC). All are stamped extruded .40 gauge plates (nominal size) with matching mounting screws • Anodized, plated, or painted aluminum plates, .125 (1/8") gauge with matching mounting screws. Edges are double beveled .0625 (1/16") at 45-degree angles. - Anodized available in Black, Clear, Gold, and Gray. - Plated available in 24K Gold, or Nickel - Painted in Black, White, Ivory and Gray. - Or painted custom PMS color matching to fit YOUR decor! All above custom plates are available in 1 - 6 gang standard sizes. Includes up to five letters engraving above each device. Custom graphics, engraving or silk-screening also available. Please contact our sales department for details. Custom Junction Boxes Audio & Video Junction Boxes HAVE Custom Junction Boxes are available in many convenient standard sizes (And, of course, CUSTOM sizes upon request). Junction boxes may be custom configured with nearly any type input or output connectors, may be custom engraved or silk screened, and can be delivered hard wired to multi-pair cable (as shown) or provided with a variety of multi-pin connectors, or you can order them unloaded but labeled to your own specifications. Standard sizes: • SMALL will fit up to 9 XLR type connectors • MEDIUM will fit up to 20 XLR type connectors • LARGE will fit up to 36 XLR type connectors For exact box sizes, please contact our sales department. Sizes depend on YOUR connector configuration needs. All with Black Anodized finish. Custom Rack Panels Audio & Video Rack Panels CABC0705-9 HAVE Custom Rack Panels are also available in any configuration or RU size you need. Nearly any type input or output connectors are available, and like our custom wall plates and junction boxes, panels may be custom engraved or silk screened, and can even be delivered hard wired to multi-pair cable or provided with a variety of multi-pin connectors. Or you can order them unloaded but labeled to your own specifications. Options include: • Available in up to 8 RU sizes. (1.75” per RU) • Available in black anodized, powder coat, or custom finish • Engraving or silk screening available to your specs National Order Line: 24 Hour Fax Orderline: West Coast Sales & Service: have@haveinc.com800-999-HAVE (4283) 518-828-2008 661-266-1624 store.haveinc.com
  • 75. 76 Wall Plates & Outlets Wall Plates Neutrik Loaded Wall Plates Audio & Video Wall Plates Loaded Wall Plates HAVE stocks lots of standard wall plates that are infinitely configurable with any connector you need. Our standard plates here come in Stainless or Black Anodized. You can purchase them empty and install your own connectors, or CALL with your needs and we can load them for you! • Single, Double and Triple Gang • Standard DL cutouts • Fits standard electrical boxes • All sizes below available in Black or Stainless • Also available with cut-outs specially for CANARE connectors* WPU1004 Single Gang 1 DL hole, Stainless High quality loaded wall plates from Neutrik USA, Inc.®. Riveted WPU1004BLA Single Gang 1 DL hole, Black offset mounting in stainless steel plates to allow for printing or WPU1013 Single Gang 2 DL hole, Stainless etching. Mounts in a standard single electrical box outlet, screws WPU1013BLA Single Gang 2 DL hole, Black included. The dual configurations can be used either vertically or WPU2009 Double Gang 2 DL hole, Stainless horizontally. WPU2009BLA Double Gang 2 DL hole, Black WPU2011 Double Gang 4 DL hole, Stainless NEU103F w/ 1 NC3FD-L-1 female XLR receptacle WPU2011BLA Double Gang 4 DL hole, Black NEU103M w/ 1 NC3MD-L-1 male XLR receptacle WPU3001 Triple Gang 3 DL hole, Stainless NEU203F w/ 2 NC3FD-L-1 female XLR receptacles WPU3001BLA Triple Gang 3 DL hole, Black NEU203M w/ 2 NC3FD-L-1 male XLR receptacles WPU3002 Triple Gang 6 DL hole, Stainless NEU103P w/ 1 NJ3FP6C female locking ¼” WPU3002BLA Triple Gang 6 DL hole, Black NEU203P w/ 2 NJ3FP6C female locking ¼” * For standard wall plates with cut-outs for Canare connectors, use * For standard wall plates with cut-outs for Canare connectors, use same part numbers with WPUC prefix. same part numbers with WPUC prefix. HAVE can also provide by special order: Also available loaded with 2 and 4 pole Speakon, or single or dual • Up to 6 gang standard and custom sizes Ethercon receptacles. CALL! Minimum order quantities may apply • ½” D Hole, 3/8” Hole, or HD15/DB9 Hole • Custom Engraving available • Anodized and Powder Coat color finishes available Shop online! • OR ANY WALLPLATE/PANEL YOU CAN THINK OF! store.haveinc.com Data/Networking Outlets Modular MultiMedia Outlet Systems Choose from a large selection of Multimedia Modular configurations, including Category 5E and 6 connectors, as well as common A/V and multimedia connectors. Connector modules most commonly configured as female-to-female feed-through or female 110-type punchdown. Available models include: • Modular jacks, RJ45 for voice or data • BNC couplers • CATV, CCTV "F" couplers • ST type fiber optic coupler • Face plates and patch panels National Order Line: 24 Hour Fax Orderline: West Coast Sales & Service: have@haveinc.com 800-999-HAVE (4283) 518-828-2008 661-266-1624 store.haveinc.com
  • 76. Tools & Accessories 77 Men and women cannot live on cable and connectors alone! Accessories and Tools, like water, are necessities of life in this wonderful A/V industry you and we call home! And if you need Tools and Accessories, HAVE HAS IT! We feature great tools and accessories from Canare, HAVE, Paladin and Trompeter here in our catalog. But remember...CALL US FOR ANY TOOL AND ACCESSORY NEED FROM INDUSTRY LEADERS LIKE: CABC0705-9 National Order Line: 24 Hour Fax Orderline: West Coast Sales & Service: have@haveinc.com800-999-HAVE (4283) 518-828-2008 661-266-1624 store.haveinc.com
  • 77. 78 Reels Canare Cable Reels All Reels Stackable! Durable! Moving and laying cable on a tight shedule can be very demanding, not only on personnel, but also on the cable. Canares unique cable reels keep cable stored neatly when not in use, yet allow quick deployment without tangles and twisting. Canare Cable Rack CANCRS-02 Cable Storage Rack • Special 3-position brake lever for versatile use • Extremely durable "E" shaped brace made of heavy duty tubular steel This is a premium cable reel storage rack that can easily accom- • Durable black finish for lasting good appearance and reel protection modate 10 full size Canare Cable spools, like 10ea. 984’ rolls • Heavy duty, permanently lubricated bearings perform like new of L-5CFB! Extra heavy duty gauge steel frame that includes 4 even after years of hard use industrial strength locking casters, so rack stays put when you • Large, robust winding handle for easy rewind pay out cable. Perfect for multiple cable pulls, system installation job sites or professional wire shops. Rugged crinkled powder CANR-300L Small reel, side cutout. Stackable, mounting plate coat blue finish. in hub and flange. Will hold approx. 460 length of L4E6S. CANR-300S Small reel, side cutout for single channel cable ends. Stackable, ideal for ENG/EFP vans. Will hold approx. 450 length of L4E6S. CANR-300BN Small reel, stackable, 75ohm BNC jacks on the hub and the flange. Stackable. Will hold approx. 450 length of L4E6S. CANR-300CN Small reel, Parallel wired male and female XLR connectors on the hub and the flange. Stackable. Will hold approx. 450 length of L4E6S. CANR-380D Medium reel with casters. Ideal for multi-channel snakes or long mic runs. Will hold approx. 1000 length of L4E6S. CANR-380S Medium reel with casters. Large side cutout for cable ends. Ideal for multi-channel snakes or long single- channel mic runs. Will hold approx. 1000 length of L4E6S. CANR-460C Large reel with casters, connector mounting plate on hub, cable cut-out on drum. Will hold approx. 1800 length of L4E6S. CANR-460S Large reel with casters. Large side cutout for cable ends. Ideal for multi-channel snakes or long single-channel mic runs. Will hold approx. 1800 length of L4E6S. We also carry great reels from Contact our Sales Department for info! National Order Line: 24 Hour Fax Orderline: West Coast Sales & Service: have@haveinc.com 800-999-HAVE (4283) 518-828-2008 661-266-1624 store.haveinc.com
  • 78. Tool Kits 79 Pre-Loaded Complete Kits! CABC0705-9 Shop online! store.haveinc.com National Order Line: 24 Hour Fax Orderline: West Coast Sales & Service: have@haveinc.com800-999-HAVE (4283) 518-828-2008 661-266-1624 store.haveinc.com
  • 79. 80 Tools Featured Product Tools Crimp Tools and Dies Canare Coaxial Cable Strippers Hardened Swedish st eel TS-100E construction rated at 50,000 5 in 1 tool! dura-cycle lifespan! Canare cable strippers are well known for their precision and TC-1 Crimp Tool features: craftsmanship. The TS100E is a special "five-in-one" tool that • Interchangeable die sets features 5 factory presets, plus it allows you to create custom • Scissor ratchet action settings. Like the rest of the TS series, it features 3 circular • Emergency release lever blades to precisely cut around the cable without damaging it. • Adjustable crimp force via drag washer The unique V guide aligns the coax to the center of the • Hardened Swedish Steel construction chamber, and Canares "side slit" jacket blade allows you to • Rated at 50,000 dura-cycle lifespan carefully peel off the jacket for consistant and productive cable prep. TCD Die Set features: • 2-piece precision fit design Specially designed hardened steel blades revolve for extra long blade • 2 Hex Bolts for quick handtool loading life. Simply insert cable, rotate cable stripper, pull out cable, peel off • Tight dimensional tolerances jacket, and cable is ready to crimp! For Canare and Belden Cable. • Engraved model ID CANTS-100E 5 in 1 tool good for cables with O.D. from .173" CANTC-1 Crimp tool for all Canare dies to .402". Works on all Canare Cables! CANTC-D-1DB die for C1 plugs CANTS-V3C for V-3C, V-3CFB, A2V1, and A2V2-L CANTC-D-3C die for C3 plugs CANTS-3C for L-3C2VS, L-3CFB, V-4CFB, and Belden 1506A CANTC-D-4C die for C4 plugs CANTS-4C for LV-61S, L-4CFB, V-5C, and Belden 8241, CANTC-D-5CF die for C5F and C77A plugs 8241F, 8279, & 1505A CANTC-D-7CA die for C7F plugs CANTS-31C for Belden 1694A, 9066, 9116, and 9248 CANTC-D-451CA die for C4 and C51 plugs CANTS-5C for LV-77S, L-5CFB, V-5CFB, and Belden 8281, CANTC-D-35CA die for C25, C3, and C5 plugs 88281, & 8281F CANTS-C replacement blade cassette for TS-100E Beware! There are other products available that may Application Note: All Canare stripper models are preset for use look similar to the Canare TC-1 but do not meet the same with Canare BNC, F, & RCA crimp plug dimensions only high quality standard and will not perform as well. Make sure youre using only Canare crimp tools and dies! Tool Case Canare R-5 Tool Case Low cost, lightweight, rugged road case. Accomodates a TC-1 hand tool, 4 TC-D crimp die sets, a box of 100 Canare BNC or RCA crimp plugs, stripping tools, and adapters. Tool case only. BNC Extraction Tools CANR-5 NEW ! Two to choose from: Now available for Mid-Size Patch Bays! Perfect for those hard-to-reach BNC jacks located deep inside rear rack enclosures. Fits all standard MIL-SPEC BNC line plugs and has a tapered channel socket to permit up to and including .405" cable. 12" heavy duty metal with clear blue plastic handle. BET- MNBC is the new Extraction Tool specifically designed for Canares line of Mid-Size BNC connectors. CANBET-12 for BCPC series BNC CANBET-MNBC for BCPCM Mid-Size series BNC - NEW! National Order Line: 24 Hour Fax Orderline: West Coast Sales & Service: have@haveinc.com 800-999-HAVE (4283) 518-828-2008 661-266-1624 store.haveinc.com
  • 80. & Paladin Cable Tools 81 Cable Tools Paladin Cable Tools Crimp Tools The Paladin Tools® brand is recognized industry wide as the leader in selection and quality. Here is a small representation of some of the fine Paladin Tools we carry. Please call for any other Paladin need. (or ANY manufacturer for that matter!) Strippers 17-1010 Crimp tool for RG59 F connectors (12-4001) From the Paladin CST Cassette Strip Tool Line, for stripping cable 17-1011 Crimp tool for BNC connectors (12-1001, 12-1012, 12- diameters of .1” - .315” (2.5 – 8.0 mm) including RG58, RG59, 2001) and RCA connectors (12-3001) RG62, RG174 & Belden 1505A. Interchangeable memory blade ----------------------------------------------------------- ---------------------------------------------------------- cassette holders eliminate need to readjust blades when changing Cable Strippers cable types. Cam adjustment for different cable diameters ensures precise hold on cable. Includes Y block for smaller cable. Blades can be adjusted for precise cutting depths. • Flexible tool for Coax Professionals • Set Cam adjustment for high volume jobs CS8300 Cable stripper for RG-58, -59, & -62 cable • Two sided blades for longer use 17-1051 All purpose wire stripper, cutter, plier, and crimper • Easy to change blade cassettes are slotted to fit into frame for audio cable • Lifetime warranty on frame, one year on cassettes ----------------------------------------------------------- ---------------------------------------------------------- Heat Shrink Gun PAL1240 Strip Dimensions: A=.279, B=.201(Green Cassette) 17-5101 115 VAC. Maximum current draw 4.5 amps. Impact PAL1247 Strip Dimensions: A=.327, B=.146 (Orange Cassette) resistant. Only 1.75 lbs. 700 FPM air velocity. 800° F. UL and PAL1248 Strip Dimensions: A=.344, B=.094 (Black Cassette) CSA certified. Crimp Tools Paladin’s 1300 series, interchangeable-die crimp tool is the Reach Extender Tools answer for precision crimping at an affordable price. These tools crimp the most popular coaxial connectors. See crimp chart for For BNC, TNC, TRB, TRT, TWBNC, TWTNC connectors. Use this tool specific connector and crimp dimensions on our website at for getting connectors into and out of those hard-to-reach places. www.haveinc.com. • Durable tool with triple wide ratchet • Easy to use and maintain • Fully-ratcheting cycle with built-in safety release • Interchangeable dies constructed of heat-treated steel for long life • EZI-Change® die screws make changing dies quick and easy 176006 12" tool length • Ergonomically-designed handles for effortless operation 176007 3" tool length • Foam-lined case available for keeping dies and crimper frame together (P/N 901013) • Choose from complete tool with die set inserted or separate Paladin Cable Tools tool frame and individual die sets • Five-year warranty CATV F Extraction Tool CABC0705-9 The 1908 is a combination tool. Use the hex socket to easily remove and insert F connectors. Use the threaded end to hold the connector while you insert the cable for twist-on connectors. It helps prevent finger injuries. HANDY! PA 1302 Crimper hand tool PA 2041 Die: crimps BNC connectors for RG8, RG59, (Belden 8241), & 62AU PA 2047 Die: crimps BNC connectors (Belden 8281) PAL1908 F Extraction Tool National Order Line: 24 Hour Fax Orderline: West Coast Sales & Service: have@haveinc.com800-999-HAVE (4283) 518-828-2008 661-266-1624 store.haveinc.com
  • 81. 82 Cable Tools & Accessories Full Enclosure RPT Tools HAVE Gaffers Tape AVP Tools especially designed for RPT (Rapid Punch Terminal) Gaffers Tape Systems. Easily terminate cable to your Full Enclosure AVP Patchbay, Popular matte-surface cloth tape used throughout the photography, or service damaged terminals. motion picture, and television industries for a wide range of applications: mounting fixtures/reflectors, moisture and dust- proof sealing of equipment cases and film containers, and Punch Tool with Tip AVP RPT protecting and positioning floor cables. patchbays a re availab on page 62! le • Standard stock in black & gray. Other colors available in case lots only, please call! • Best quality, fairly priced • Vinyl coated cloth tape AVPATRPTPTK • Extra strong ----------------------------------------------------------- ---------------------------------------------------------- • Waterproof Punch Tip (Replacement Tip) • Non-reflective • 13mils thick • High tack natural adhesive • Easy hand tear AVPATRPTTIP 40-1009BLA 3" x 60, Matte black ----------------------------------------------------------- ---------------------------------------------------------- 40-1009GRA 3" x 60, Matte gray Removal Tool Kit 40-1010GRA 2" x 60, Matte gray 40-1012BLA 2" x 60, Matte black Shop online! AVPATRPTRTK For Punch Terminal Removal store.haveinc.com Morph Tools Crimp Tool AVP Morph Permacel Gaffer’s Tape patchbays a re availab Gaffers Tape on page 62! le Permacel’s Gaffer’s tape is highly versatile and popular matte-surface cloth tape, used widely throughout the photo/motion picture/television industry. Great for ANY holding and sealing applications, or temporary mounting of lighting and fixtures, or for moisture and dustproof sealing AVPATLHCT AVP EDAC Hand Crimp Tool. For easy and fast of equipment cases. Also great for bundling and positioning floor crimping of EDAC Connector Mating Kit supplied with each cables, or for floor marking. Preferred by professionals whenever an Morph Patchbay. extra-strong, waterproof and easy-to-use tape is required! ----------------------------------------------------------- ---------------------------------------------------------- • Available in Gray, Black, and White matte, non-reflective colors Insertion Tool • Outstanding conformity to odd-shaped and irregular surfaces • Provides a positive, waterproof and dirt resistant seal… yet permits easy clean removal • Performs over wide range of temperature. Indoors or Out 1G150GR 1" x 150 gray AVPATLIT EDAC Insertion Tool. Handy tool makes it EASY to insert 1G250GRY 2" x 180 gray EDAC connectors on each Morph Module 1G350BLA 3" x 150 black ----------------------------------------------------------- ---------------------------------------------------------- P672WH2 2" x 180 white Ejection Tool PG60BL 2" x 180 black AVPATLET EDAC Ejection Tool. Handy Tool for ejecting EDAC Connectors from Morph Modules National Order Line: 24 Hour Fax Orderline: West Coast Sales & Service: have@haveinc.com 800-999-HAVE (4283) 518-828-2008 661-266-1624 store.haveinc.com
  • 82. Cable Tools & Accessories 83 Cable Accessories Flexible Sleeving Heat Shrink Tubing Braided expandable sleeving for bundling cables, wires, hoses. An economical way to insulate, protect, and harness electrical and Designed for maximum protection from abrasion and damage. electronic components. Durable and lightweight, it resists heat, cold, cuts, and moisture. Unique mesh construction allows easy installation over existing cable ends. Available in black, blue, clear, gray, green, orange, red, white, yellow. Cuts with hot knife. 16-1060-COLOR 3/16", colors (POLY), clear (PVC), 100 roll 161062-COLOR*1/4", colors (POLY), clear (PVC), 100 roll 161070-COLOR*3/8", colors (POLY), 50 & 100 rolls; clear (PVC), 50 roll 161063-COLOR*1/2", colors (POLY), clear (PVC), 50 & 100 rolls 161064-COLOR*3/4", colors (POLY), clear (PVC), 50 & 100 rolls 161065-COLOR*1", colors (POLY), clear (PVC), 50 & 100 rolls Heat Shrink Precuts 161088-COLOR Nominal dia.:1/8"; Size range: (3/32" - 1/4"); 1/8" Diameter 100 (black only), 225, 1000 rolls 161061CLE-1.50IN 1.5" cut, 40 pack 161080-COLOR-200F Nominal dia.: 1/4"; Size range: (1/8" - 7/16"); 3/16" Diameter 100 (black only), 200, 1000 rolls 161069COLOR-8.00IN 8" cut, black or red, 10 pack 161081-COLOR-100 Nominal dia.: 1/2"; Size range: (1/4" - 3/4"); 161069CLE-1.50IN 1.50" cut, clear, 40 pack 100, 500 & 1000 rolls 1/4" Diameter 161082-COLOR-75 Nominal dia.: 3/4"; Size range: (1/2" - 1 1/4"); 161062CLE-1.50IN 1.5" cut, clear, 40 pack 75, 250, 500 rolls 161062COLOR-1.25IN 1.25" cut, black or red, 50 pack 161083-COLOR-50 Nominal dia.: 1 1/4"; Size range (3/4" - 1 3/4"); 161062COLOR-6.00IN 6" cut, black/blue/red/white/yellow, 10 pack 50, 250 rolls 161062COLOR-8.00IN 8" cut, black or red, 10 pack 161086-COLOR-30 Nominal dia.: 1 3/4"; Size range: (1 1/4" - 3/8" Diameter 2 3/4"); 30, 200 rolls 161070CLE-1.50IN 1.5" cut, clear, 40 pack 161070CLE-2.00IN 2" cut, clear, 25 pack Flexible Sleeving - Clean Cut 161070CLE-2.50IN 2.5" cut, clear, 20 pack Cut with ordinary scissors and still maintain an extraordinarily 161070COLOR-1.50IN 1.50" cut, black or red, 50 pack fray-resistant end. IDEAL for field installers where access to a 1/2" Diameter hot knife is not possible. Clean Cuts fray-resistant properties 161063CLE-2.0IN 2" cut, clear, 25 pack allow frequent expansion at the end cut without unraveling. 161063COLOR-2.50IN 2.5" cut, black or red, 20 pack 3/4" Diameter TECCCPT1BLA-1000F 1/8" (1/8" - 1/4") black 1000 roll 161064CLE-2.50IN 2.5" cut, clear, 20 pack TECCCPT2BLA-1000F 1/4" (5/32" - 7/16") black 1000 roll 161064COLOR-2.50IN 2.5" cut, black, 20 pack TECCCPT2.5BLA-0500F 3/8" (3/16" - 5/8") black 500 roll 1" Diameter TECCCPT3BLA-0500F 1/2" (1/4" - 3/4") black 500 roll 161065COLOR-2.00IN 2" cut, black, 25 pack TECCCPT4BLA-0250F 3/4" (5/8" - 1") black 250 roll 161065COLOR-2.50IN 2.5" cut, black, 20 pack TECCCPT6-0250 1 1/4" (1" - 1 1/2") black 250 roll *COLORS: black, blue, clear, gray, green, red, white, yellow. Note: Our part numbers abbreviate COLOR as follows: black BLA, blue BLU, clear CLE, gray GRA, green GRE, red RED, white WHI, yellow YEL TechFlex Tools Bench Mount Hot Knife Hand Held Hot Knife Solder It™ Hot Knife Kit 110 Volt A.C. fast heating, with lighted Doubles as a soldering gun. Inexpensive This tool is a necessity to any field switch. Allows for fast, hands free way to do 2 jobs with one great tool. installer! High quality butane hot knife CABC0705-9 cutting and sealing of Techflex Techflex sleeving cutting and sealing, works great on Techflex sleeving and sleeving. AND soldering! Soldering tip included. doubles as a soldering iron. HKBN Bench Mount Hot Knife HKHH Hand Held Hot Knife/Soldering Iron HKBUT Solder It Hot Knife Kit National Order Line: 24 Hour Fax Orderline: West Coast Sales & Service: have@haveinc.com800-999-HAVE (4283) 518-828-2008 661-266-1624 store.haveinc.com
  • 83. 84 Soldering Tools & Accessories Soldering Tools & Accessories Wonder Solder Solomon Soldering Station Wonder Solder UltraClear™ For the professional or prosumer, this is a terrific, economical station Wonder Solder UltraClear™ is one of the solders we use in our guild that provides performance, reliability, and durability, along with the cable shop to manufacture our HAVEFlex, PROFlex and Flexygy cable affordable price. Weve tested these in our own Guild Cable shop, and assemblies. We use what we sell, and sell only the best! found them to be durable, accurate and trouble free. • Quality soldering station for a wide range of soldering applications • Tip temperature controlled from 300°F to 790°F, with LED readout. • Constant temperature saves production time • Unit is fused and has grounding terminal • Used by professionals the world over • Complete soldering station including soldering iron with Teflon • 16 Gauge - .050" thick, or 21 Gauge - .031” thin insulated holder, replacement fuse & AUX & ground terminal • 1 pound spool • Special formula has a low melting temperature, (380 F). Compared to other solders, it melts sooner, then flows IN- HAV370044 Solomon Soldering Station STANTLY into the joint. Result? Each joint takes far less time than HAV370045 Soldering station, replacement iron other solders. Saving time, labor & money. • Technical superiority: Wonder Solder UltraClear cleans surfaces very well, giving superior adhesion and fusion, while flushing away impurities such as surface oxides from the signal path, Soldering Iron yielding cleaner, more transparent sound. Equally important, This is a high-quality, hand-held iron, designed to control Wonder Solder creates a purer metal solder joint, with less and damage to the tip when left on for long periods of time. No fewer dirty impurities within the joint, than other solders. (dirty temperature control, like a soldering station, but portable, and impurities, such as oxides, distort and degrade the music signal) good for quick fieldwork when necessary. Wonder Solders purity is controlled with fanatical precision (2 parts per million) for key ingredients. Thats a key reason why Wonder Solder sounds so much better than other solders. WONSOLDERFAT1LB Wonder Solder Fat .050" 16GA 1lb Spool WONSOLDERTHIN1LB Wonder Solder Thin .031" 21GA 1lb Spool • 40 Watt high-quality soldering iron, 110 Volt AC • Great for sustained usage, and portable for use in the field HAV370071 40-watt Soldering Iron HAV370022 Replacement Tip for Soldering Iron HAV370066 Replacement Nut for 370022-replacement tip Soldering Toolkits Soldering Toolkits Helping Hands Soldering Center This is a must have, for anyone serious about accurate, hands- free soldering. Leaves both hands free to hold the solder and the iron, plus it comes with an adjustable position magnifying glass, perfect for close up work. • Provides extra hands leaving both hands free to solder or repair • Chassis Holding Clip, and Glass Mag- Why not get all the soldering parts you need, together in one nifier kit, saving you time and money! Here we offer all the essential • Solder Iron Holder and Tip Cleaner soldering tools in combinations to meet your needs. HAV370054 Helping Hands Solder Center HAVSOLDERSTAKIT1 Contains 1lb spool of Wonder Solder Fat, Solomon Soldering Station, and Helping Hands Solder Center HAVSOLDERSTAKIT2 Contains 1lb spool of Wonder Solder Thin, Solomon Soldering Station, and Helping Hands Solder Center Shop online! HAVSOLDERIRONKIT1 Contains 1lb spool of Wonder Solder store.haveinc.com Fat, 40-watt Soldering Iron, and Helping Hands Solder Center HAVSOLDERIRONKIT2 Contains 1lb spool of Wonder Solder Thin, 40-watt Soldering Iron, and Helping Hands Solder Center National Order Line: 24 Hour Fax Orderline: West Coast Sales & Service: have@haveinc.com 800-999-HAVE (4283) 518-828-2008 661-266-1624 store.haveinc.com
  • 84. Cable Ties & Accessories 85 Cable Ties Bongo Ties Velcro Cable Ties Cable Ties Designed by Users! Cost effective, quality velcro, in three popular lengths. Center BongoTies provide a simple and effective new fastener design to loop, removable ties. Colors: black and HAVE purple. Red, tame unruly wires, cables, and power and extension cords for the green, and blue are available by special order. Available in 10 studio, office, industry, or home. BongoTies are made of heavy packs and 100 packs. gauge rubber attached to a patented wooden "Bongo" closure pin. The distinctive, flared end Bongo pin is designed to provide a superior button-type closure. Indented ends assure easy fasten- ing and removal. Available in 10 packs only. Want custom BONGOTIES printed ties? Call fo information! r HV5 3/4" x 5" Velcro Cable Tie HV7 3/4" x 7" Velcro Cable Tie HV10 3/4" x 10" Velcro Cable Tie Easy to use! Velcro Cable Ties Convenient, heavy duty, made to last for years! Prevents cable kinks, installs in seconds, and pulls free with one hand. Colors: black and assorted (black, white, brown, gray, purple, green, blue, yellow, orange, red). Available in 10 packs. Cable Ties & Clips Panduit is known for its quality cable ties and accessories. They offer the largest selection of styles, sizes, and materials, such as nylon and polypropylene and HALAR for plenum applications. These ties are the most popular and many meet military specifications. Permanent or releasable. RIP03 1" x 3" Velcro Cable Tie 10 pack R78IP06 1" x 6" Velcro Cable Tie 10 pack RIP09 1" x 9" Velcro Cable Tie 10 pack RIP14 1" x 14" Velcro Cable Tie 10 pack RIP21 1" x 21" Velcro Cable Tie 10 pack PANPLF1MAC 5" permanent markable cable tie (100 pk) PANPLM2SC 7-1/2" permanent markable cable tie (100 pk) Velcro Cable Catch PANPRT15SC 6" releasable cable tie (100 pk) Durable, flexible industrial velcro organizes cables against a PANPRT3SM 11-1/2" releasable cable tie (100 pk) surface. Permanently adheres to surface, yet allows easy change PANPXO Marker pen, black medium (12 pk) of cables or cords. Colors: black, white, gray. Available in 5 PANSTH2 Cable tie tool packs. We carry a va ri Velcro ties - ety of Cable Organizers Contact us Patch Cord & Cable Organizers for details! Organize your patch cords and cable assemblies for instant selec- tion, within easy reach. Holder mounts quickly on any vertical surface. Cold rolled steel with baked enamel finish. CABC0705-9 RIPC2 1" x 2" Velcro Cable Catch 5 pack RIPC4 1" x 4" Velcro Cable Catch 5 pack RIPC8 1" x 8" Velcro Cable Catch 5 pack Shop online! store.haveinc.com 16-1043 Bantam size 16-1041 1/4" size 16-1040 Large size MIDCLAW Middle Atlantic wall mount cable hanger National Order Line: 24 Hour Fax Orderline: West Coast Sales & Service: have@haveinc.com800-999-HAVE (4283) 518-828-2008 661-266-1624 store.haveinc.com
  • 85. 86 WireTracks WireTracks® Structured Channel WireTracks is a wiring channel system that you install behind Install WireT raks your baseboard molding. WireTracks consists of a wiring behind your channel that is installed in plane with your drywall and a wiring baseboard for a profess channel cover. After you attach standard baseboard molding to ional look! the wiring channel cover, they become an integrated unit. When you want to add new wiring, simply remove the cover, install the wire, and replace the cover. Adding new wiring has never been easier. Made of UL 94 Rated PVC. Applications include: • Home Theater and Stereo • Whole House Audio • Computer Networking • Alarm Systems • Cable Television • Smart House Technologies • Surveillance and Security • Intercom Systems • Music Equipment • Studio Use Original WireTacks The original WireTracks wiring channels are designed to be installed in both new and remodeling applications, but are primarily used for remodeling. They can be used for simple jobs such as getting wiring from the front of a home theater to the back. Or, they can be installed throughout a building to give building owners the ability to run wiring between any two points that are linked by connected walls. 5’ and 8’ Lengths, Adjustable depth ½” to ¾”, height 2 ½”. WIRORIG5 Wiretracks Original for Remodel 5’ WIRORIG8 Wiretracks Original for Remodel 8’ WireTracks NC (New Construction) WireTracks NC wiring channels are similar to the original WireTracks product, except that they are installed before the wallboard and have a shelf that creates a seal and makes wallboard easy to install. Designed to be installed in new homes, condominiums, apartments, and commercial buildings. When installed properly in conjunction with conduit, building owners will be able to add new wiring to any location within a house at any time in the future without damaging the walls. 8’ Lengths, Adjustable depth ½” to ¾”, channel height 2 ½”, wallboard shelf height 2 ¾”. WIRNC8 Wiretracks New Construction 8’ NEW! INNOVATIV E! National Order Line: 24 Hour Fax Orderline: West Coast Sales & Service: have@haveinc.com 800-999-HAVE (4283) 518-828-2008 661-266-1624 store.haveinc.com
  • 86. Ordering Information 87 National Office: 350 Power Avenue, Hudson, New York 12534 National Orderline: 800-999-HAVE (4283) Internet E-Mail: have@haveinc.com Customer Service/ Information: 518-828-2000 Web Site: www.haveinc.com Fax: 24 hour Orderline & Inquiries: 518-828-2008 Catalog Sales Terms & Conditions 1. Prices/Payment Terms: 3-Day • Most prices are "each;" some are by the case or pack quantity. Please see selling unit of measure. • You may pay by Credit Card, Payment In Advance (PIA), or Purchase Order (PO) for approved accounts. Service • Purchase Orders are accepted from major institutions, government agencies and credit approved accounts. Please ask for our Credit Application (3 trade references, 1 bank). 1-1/2% monthly (18% annual) interest will Anywhere be charged for all past due invoices 31 days or over. A $15-$20 bank service charge will be passed on and assessed for all bad checks. within • Minimum Order: $75 by phone, fax, or mail; $25 minimum for web orders. You may use any mix of products the USA! to meet our minimums. • Minimum Cable Cut orders: Some cables are sold only by the full reel sizes. Others we do cuts for: 50 minimum cut length on single channel cables; 25 minimum for multichannel cables. • Prices may be subject to change without notice. 2. Order Confirmation: An order confirmation is faxed after each order is placed, to assure you (and us) that we have entered your order accurately. Please look it over carefully; unless we hear back from you, we will process your order as faxed. 3. Partial Shipments & Back Orders: Occasionally manufacturer’s back orders may necessitate partial shipment to you. We will ship and invoice as soon as those items become available. If your organization is unable to pay for a partial shipment, please indicate so on your Purchase Order or when ordering. We will notify you if there will be an unusual delay, and will keep you informed as to expected shipment date. We reserve the right to ship complete. 4. Shipping: Quick Shipment: Orders received by 3:00 p.m. EST are shipped same day on regularly stocked items. We normally ship UPS ground, FedEx 3 Day Service or Best Way, unless other means are specified. Prices are FOB Hudson. Minimum shipping charge is $6.00. 5. E-mail Tracking: We are pleased to offer you e-mail notification, with tracking information, as soon as your order is shipped. 6. Returns: All returns require a Return Authorization (RA number) which must be clearly marked on each package and on your packing slip. Please contact our Client Service Desk for Information on our Return Policy & instructions prior to sending anything back. A 15% restocking charge may be applicable on certain items. Special & custom cable orders may not be returned. Please ship prepaid. 7. Damaged Merchandise: All damage claims should be filed with the carrier as soon as possible. Retain the original shipping carton. If you need to return the merchandise to us, please call our Customer Service Desk for instructions and an RA #. Merchandise should be returned to us through the carrier only. 8. Lost Merchandise: Please notify us immediately and we will trace the shipment. Upon notification of non-delivery from the carrier, we’ll file a claim and replace your merchandise. If you need an immediate replacement, we will ship and invoice. Upon notification of non-delivery from the carrier, we will credit your account. 9. Claims and Shortages must be claimed within 10 days of shipment. 10. Contract Bid Pricing, Dealers & Installers: We welcome bids, contract clients, dealers and installers. Contact our Sales Department for special pricing. Special offers, premiums and bonuses may not apply to bid and contract sales. 11. All prices, policies, specifications, and conditions are subject to change without notice. HAVE is not responsible for typographical or printing errors. Warranties-Guarantees are as stated on our invoice. Note: No representative or person is authorized to assume on behalf of HAVE, Inc., any other agreement in addition to these conditions without written consent of HAVE, Inc. This catalog does not constitute an offer to sell any of the items herein. All orders CABC0705-9 are subject to approval and acceptance at the offices of HAVE, Inc. Our ABC’s Since 1977 A We believe business can and should be run by the “Golden Rule”, an enduring value, and one shared by all of us at HAVE, Inc. B Our mission is to guide our Clients to the right products and services; ensuring that those products and services are appropriate to their needs and are fairly priced. National Order Line: 24 Hour Fax Orderline: West Coast Sales & Service: have@haveinc.com800-999-HAVE (4283) 518-828-2008 661-266-1624 store.haveinc.com