Welcome to the Camfil Farr Training AcademyBy the end of this webinar you will have an update on the newEN779:2012 standar...
EN779:2012 will be arriving       Peter Dyment 07-02-2012
WHEN?The latest indications are the standard will be due for  publication later this year. The situation will be updated  ...
EN779 as a filter test standard has been with us since 1993and was updated in 2002.What is EN779:2012 about and why is it ...
The EN779:2002 test is usually performedby an independent test house on air filtersup to F9 classification and a test repo...
EN779 was revised in 2002 because of the problem regarding the    inconsistent particulate life performance of synthetic m...
Synthetic F7 Class filters have been marketed for many years but some  a have a working particulate efficiency dropping as...
EN779:2012 has set the minimum particulate        efficiency (ME) of 35% on an F7 grade filter. This        will exclude i...
Test standard for coarse and fine air filters                                                                             ...
Indoor Air Quality approach 2012Particulate Efficiency  ME (Minimum Efficiency)        - F7 > 35%        - F8 > 55%       ...
Indoor Air Quality approach 2012   Keep the IAQ level high!   Risk of decreasing efficiency from competitors!             ...
IAQ approach for 2012Recommendations in EN13779: 2007 When the outdoor air quality has been categorized, EN13779:2007 clea...
Indoor Air improvement during 50 years                       2011 filters for good IAQ                       Particulate19...
Indoor Air improvement during 50 years                         2011 filters for good IAQ                              IAQ ...
Indoor Air improvement during 50 years                         2011                         IAQ health                    ...
Indoor Air improvement during 50 years                         2011                         IAQ health                    ...
Why is there a risk during 2012 ?• Glass fibre media F7 >60% efficiency – optimum• The new EN779:2012          ME = 35% fo...
Eurovent Energy Efficiency Rating Programme   Based on……        - EN779:2012   ME        - F7 > 35%        - F8 > 55%     ...
Eurovent Energy Efficiency Rating Programme • ME        - F7 50 > 35%        - F8 70 > 55%        - F9 80 > 70%   dP      ...
Why a is there a risk in 2012 ?• Traditional glass fibre media  F7 > 60% minimum efficiency – in built up environment• Syn...
Check the Indoor Air Quality Factor (IAQ factor)The IAQ factor is found bydividing the LCC by the ME.It tells you have muc...
HVAC Air Filtration                               Hi-Flo F7Synthetic medias                                All medias show...
What is the 2012 HVAC product opportunity?• Synthetic media filters will have to improve to reach 35% minimum  particulate...
THANK YOU                   for attending this webinar session                   ANY QUESTIONS?     Please do not hesitate...
Upcoming SlideShare
Loading in …5
×

Camfil Farr Training Academy - New EN779:2012

1,600 views
1,409 views

Published on

This webinar you will have an update on the new EN779:2012 standard and the opportunity to have clean Indoor
Air Quality and energy efficiency with Low Energy Air Filters.

Published in: Business, Technology
0 Comments
1 Like
Statistics
Notes
  • Be the first to comment

No Downloads
Views
Total views
1,600
On SlideShare
0
From Embeds
0
Number of Embeds
306
Actions
Shares
0
Downloads
21
Comments
0
Likes
1
Embeds 0
No embeds

No notes for slide

Camfil Farr Training Academy - New EN779:2012

  1. 1. Welcome to the Camfil Farr Training AcademyBy the end of this webinar you will have an update on the newEN779:2012 standard and the opportunity to have clean IndoorAir Quality and energy efficiency with Low Energy Air Filters 1
  2. 2. EN779:2012 will be arriving Peter Dyment 07-02-2012
  3. 3. WHEN?The latest indications are the standard will be due for publication later this year. The situation will be updated over the next few months.We are all trusting that a decision to proceed will be forthcoming so that our industry can make progress and plan for the future. 3
  4. 4. EN779 as a filter test standard has been with us since 1993and was updated in 2002.What is EN779:2012 about and why is it important?It is the updated European Standard that gives a laboratory test and class to benchmark HVAC air filter particulate efficiency.It uses a test aerosol of 0.4 micron and ASHRAE dust to load (not test) the filter and increase air filter resistance in stages. 4
  5. 5. The EN779:2002 test is usually performedby an independent test house on air filtersup to F9 classification and a test report isissued. What is new in the 2012 update? EN779:2002 Test Rig 5
  6. 6. EN779 was revised in 2002 because of the problem regarding the inconsistent particulate life performance of synthetic media filters.SINTEF test results Norway (1995) show real lifetime performance losses 6
  7. 7. Synthetic F7 Class filters have been marketed for many years but some a have a working particulate efficiency dropping as low as 10%.EN13779 advises that F7 is the minimum filter class required for cleaning air and thereby making it safe to inhale. Clearly this standard assumes a consistent F7 performance. 7
  8. 8. EN779:2012 has set the minimum particulate efficiency (ME) of 35% on an F7 grade filter. This will exclude inferior synthetic media HVAC filters.MinEffy.35% 8
  9. 9. Test standard for coarse and fine air filters 1) Table 1— Classification of air filters Group Class Final test Average Average Minimum 2) pressure arrestance (Am) efficiency (Em) Efficiency drop of synthetic dust of 0,4 µm particles of 0,4 µm particles Pa % % % Coarse G1 250 50 ≤ Am < 65 - - G2 250 65 ≤ Am < 80 - - G3 250 80 ≤ Am < 90 - - G4 250 90 ≤ Am - - Medium M5 450 - 40 ≤ Em < 60 - M6 450 - 60 ≤ Em < 80 - Fine F7 450 - 80 ≤ Em < 90 35 F8 450 - 90 ≤ Em < 95 55 F9 450 - 95 ≤ Em 70 NOTE 1) The characteristics of atmospheric dust vary widely in comparison with those of the synthetic loading dust used in the tests. Because of this the test results do not provide a basis for predicting either operational performance or life. Loss of media charge or shedding of particles or fibres can also adversely affect efficiency. 2) Minimum efficiency is the lowest efficiency among the initial efficiency, discharged efficiency and the lowest efficiency throughout the loading procedure of the test. 9
  10. 10. Indoor Air Quality approach 2012Particulate Efficiency ME (Minimum Efficiency) - F7 > 35% - F8 > 55% - F9 > 70% Average efficiency – as before with caution - nothing to change 10
  11. 11. Indoor Air Quality approach 2012 Keep the IAQ level high! Risk of decreasing efficiency from competitors! 11
  12. 12. IAQ approach for 2012Recommendations in EN13779: 2007 When the outdoor air quality has been categorized, EN13779:2007 clearly specifies the filter class that is required to achieve preferred indoor air quality: 12
  13. 13. Indoor Air improvement during 50 years 2011 filters for good IAQ Particulate1961 filters for good IAQ 13
  14. 14. Indoor Air improvement during 50 years 2011 filters for good IAQ IAQ / health Particulate Protecting equipment1961 14
  15. 15. Indoor Air improvement during 50 years 2011 IAQ health Particulate 2012 EN779:2012 Protecting equipment1960 15
  16. 16. Indoor Air improvement during 50 years 2011 IAQ health Particulate 2012 Risk ? Possibility! Protecting equipment1961 16
  17. 17. Why is there a risk during 2012 ?• Glass fibre media F7 >60% efficiency – optimum• The new EN779:2012 ME = 35% for F7 (Minimum Efficiency)• Could lead to over 40% less clean air 17
  18. 18. Eurovent Energy Efficiency Rating Programme Based on…… - EN779:2012 ME - F7 > 35% - F8 > 55% - F9 > 70% 18
  19. 19. Eurovent Energy Efficiency Rating Programme • ME - F7 50 > 35% - F8 70 > 55% - F9 80 > 70% dP lower Energy rating higher 19
  20. 20. Why a is there a risk in 2012 ?• Traditional glass fibre media F7 > 60% minimum efficiency – in built up environment• Synthetic F7 charged media – ME = 16-20%• Synthetic media has to improve to reach minimum 35% ME (minimum efficiency) – with increased pressure drop• New glass media >45% efficiency – lower pressure drop 20
  21. 21. Check the Indoor Air Quality Factor (IAQ factor)The IAQ factor is found bydividing the LCC by the ME.It tells you have much filterperformance you are getting foryour money.EG. M7 F7 bag = 24.7 IAQG4 S-Flo-F7 bag = 154.6 IAQIAQ Factor is 6.25 Xper % Minimum Efficiency (ME) 21
  22. 22. HVAC Air Filtration Hi-Flo F7Synthetic medias All medias shownrely on electrostatic at the samecharge for good magnificationparticulate efficiency Synthetic Competitor F7 S-Flo F7 22
  23. 23. What is the 2012 HVAC product opportunity?• Synthetic media filters will have to improve to reach 35% minimum particulate efficiency (ME) – meaning an increased pressure drop• Reduce pressure drop with LEAF – keep minimum efficiency high (ME) usually about 55% to 60% for F7.• Never compromise on filter particulate efficiency !• Save energy – better LCC – Eurovent Energy Classification Programme• That is an improvement opportunity! 23
  24. 24. THANK YOU for attending this webinar session ANY QUESTIONS? Please do not hesitate to contact Camfil Farr for any additional information or to arrange a visit.For more information about clean air solutions, improving air quality, low energy air filters, CRC (Carbon Reduction Commitment), AHUs (Air Handling Units) and the EPBD, visit www.keepthecityout.co.uk www.lowenergyairfilter.co.uk blog and subscribe to the RSS Feed 24

×