G101/G231 Quick Start Guide

Note 1: Please do not plug WLAN card into CardBus
        port/MiniPCI slot of your computer ...
Step 2: The InstallShield Wizard box will appear, click "Next" to
         continue.




                                2
Step 3:Licence Agreement ,Please choice “I accept the terms in
     the license agreement” and click "Next" to continue.

...
   The driver and utility are Installing




   Don’t care below message and click "Continue Anyway"
    button to conti...
    Click Finish to complete install procedure.




Step5:Insert the G101/G231 WLAN adapter into the PCMCIA
       port/M...
then click “Next” Button to continue.
     Note: Please turn-off computer before you insert G101.




    Please wait whi...
   Please wait while the wizard installs the software.




   Complete device install.

                            7
8
Associating Wireless Device

Note: If you don’t disable the XP’s ‘Wireless Zero
Configuration’, you can’t use the adapter’...
   You can’t use function of the adapter’s utility as below.




                                                        ...
SETP2.   Disable    the   XP’s  ‘Wireless Zero
     Configuration’ and use “TwinMOS Wireless
     LAN Configuration Utilit...
   In “Wireless Network Connection Properties“ screen,
    uncheck the setting “Use Windows to configure my
    wireless ...
   Clicking on the utility icon will start the configuration
    utility.




                                           ...
Using WPA of the Windows XP’s Utility

Note1: Before use the WPA feature, please install
      Windows XP Service Pack 1 w...
Step 1: right click the icon to select “View Available
         Wireless Networks”.




Step 2:Click “Advanced” button fro...
Step3:Click “Configure” button to configure the WPA
      function for the current network.




                         16
  Network Authentication
‧Open – No authentication is needed among the wireless
          network.
‧Shared – Only wireles...
     Data Encryption
    ‧WEP – In WPA or WPA-PSK mode, WEP is also able to be
             the encryption method for the...
Install Driver and Utility for Windows 2000

Step 1: Insert the CD into the CD-ROM device and execute the
         "setup....
Step 3: Licence Agreement ,Please choice “I accept the terms
         in the license agreement” and click "Next" to contin...
   The driver and utility are Installing.




   Click Finish to complete install procedure.




                       ...
Step 5: Insert the G101/G231 WLAN adapter into the PCMCIA
        port/MiniPCI slot of your computer, the system will
    ...
Step 6:Please click “Start-> programs->TwinMOS ->G101_G231
       WLAN Configuration Utility”.




       The TM icon wil...
Install Driver and Utility for Windows 98SE

Step 1: Insert the CD into the CD-ROM device and execute the
         "setup....
Step 3: Licence Agreement ,Please choice “I accept the terms
          in the license agreement” and click "Next" to conti...
   The driver and utility are Installing.




   Click Finish to complete install procedure.


                         ...
Step 5: After running the driver package, the Notebook (or PC)
         with Win98 OS shall be restarted




Step 6: Inser...
   New Hardware Found




Step 7: Please insert the disk labeled "Windows 98 Second
        Edition CD-ROM."




Step 8: ...
Step 9: Copying Files




Step10:Please     click   “Start->    programs->TwinMOS
         ->G101_G231 WLAN Configuration ...
   The TM icon will appear in tray bar..




   The “TwinMOS WLAN Configuration Utility” screen will
    appear.




   ...
Utility Usage for G101/G231 WLAN Adapter
Step 1 Please click “All programs->TwinMOS->G101_G231 WLAN
       Configuration U...
Step 2: This screen shows all Access Points or Adapters
         nearby when operating in Infrastructure. Click
         “...
Install Driver and Utility for Linux

NOTE 1: Before driver install, Please make sure below.
        System Environment:
...
The Station Driver provides IEEE 802.11b/g station functionality.
This document covers its available I/O control commands ...
1.   Installation steps:
     Step 1: Execute "insmod –f IPN2220STA.o "
                  at the directory where the IPN22...
“./iwconfig wlan0 channel N” (N denotes the channel of
          the ad-hoc network you want to create, from 1 to 11)

   ...
(4) To enable WEP that you have set before via (1) or (2)
             or (3), the command is "./iwconfig wlan0 key on".
 ...
Upcoming SlideShare
Loading in...5
×

Quick Start Guide.doc.doc

343

Published on

0 Comments
0 Likes
Statistics
Notes
  • Be the first to comment

  • Be the first to like this

No Downloads
Views
Total Views
343
On Slideshare
0
From Embeds
0
Number of Embeds
0
Actions
Shares
0
Downloads
2
Comments
0
Likes
0
Embeds 0
No embeds

No notes for slide

Quick Start Guide.doc.doc

  1. 1. G101/G231 Quick Start Guide Note 1: Please do not plug WLAN card into CardBus port/MiniPCI slot of your computer until drive setup has completed. Note 2: After driver installed, the PC within Win98SE OS shall be restarted, for Win2000 or WinXP OS the PC doesn’t need to restart. Install Driver and Utility for Windows XP Step 1: Insert the CD into the CD-ROM device and execute the "setup.exe" program for your purchace G101/G231 series to select . 1
  2. 2. Step 2: The InstallShield Wizard box will appear, click "Next" to continue. 2
  3. 3. Step 3:Licence Agreement ,Please choice “I accept the terms in the license agreement” and click "Next" to continue. Step 4: Click "Install" button to continue. 3
  4. 4.  The driver and utility are Installing  Don’t care below message and click "Continue Anyway" button to continue. 4
  5. 5.  Click Finish to complete install procedure. Step5:Insert the G101/G231 WLAN adapter into the PCMCIA port/MiniPCI solt of your computer, the system will automatically find the device and search for its software, 5
  6. 6. then click “Next” Button to continue. Note: Please turn-off computer before you insert G101.  Please wait while the wizard installs the software.  Don’t care below message click "Continue Anyway" button to continue. 6
  7. 7.  Please wait while the wizard installs the software.  Complete device install. 7
  8. 8. 8
  9. 9. Associating Wireless Device Note: If you don’t disable the XP’s ‘Wireless Zero Configuration’, you can’t use the adapter’s utility. Please disable XP’s it and then use G101/G231’s utility. SETP1:If you don’t disable the XP’s ‘Wireless Zero Configuration’, you can not use function of the adapter’s utility.  Clicking on the utility icon.  Click “Yes”,then Radio ON 9
  10. 10.  You can’t use function of the adapter’s utility as below. Useless Useless 10
  11. 11. SETP2. Disable the XP’s ‘Wireless Zero Configuration’ and use “TwinMOS Wireless LAN Configuration Utility”  Double-click the icon marked in red in the taskbar and you may start using the Windows XP’s ‘Wireless Zero Configuration’.  Get into Windows XP’s utility, click "Advanced" button. 11
  12. 12.  In “Wireless Network Connection Properties“ screen, uncheck the setting “Use Windows to configure my wireless network settings“. Note that if you want to change back to the Windows XP built-in utility, check the item again. 12
  13. 13.  Clicking on the utility icon will start the configuration utility. Useful Useful 13
  14. 14. Using WPA of the Windows XP’s Utility Note1: Before use the WPA feature, please install Windows XP Service Pack 1 with Windows XP support patch for Wi-Fi Protected Access program Note2: Configure the card by wireless built-in utility (Wireless Zero Configuration). Note3: All devices in the network should use the same encryption method to ensure the communication. Wi-Fi Protected Access (WPA) is a specification of standards-based, interoperable security enhancements that strongly increase the level of data protection (encryption) and access control (authentication) for existing and future wireless LAN systems. The technical components of WPA include Temporal Key Integrity Protocol (TKIP) for dynamic key exchange, and 802.1x for authentication.  Example : 14
  15. 15. Step 1: right click the icon to select “View Available Wireless Networks”. Step 2:Click “Advanced” button from “Wireless Network Connection”. 15
  16. 16. Step3:Click “Configure” button to configure the WPA function for the current network. 16
  17. 17.  Network Authentication ‧Open – No authentication is needed among the wireless network. ‧Shared – Only wireless stations using a shared key (WEP Key identified) are allowed to connecting each other. ‧WPA – This mode is for enterprise with an authentication server (Radius Server), WPA-enabled access point, and a WPA-enabled client. Once WPA is enabled, all clients and access points on the network must be WPA-enabled in order to access the network. ‧WPA-PSK – It is a special mode designed for home and small business users who do not have access to network authentication servers. In this mode, known as Pre-Shared Key, the user manually enters the starting password in their access point or gateway, as well as in each PC on the wireless network. WPA takes over automatically from that point, keeping unauthorized users that don't have the matching password from joining the network, while encrypting the data traveling between authorized devices. 17
  18. 18.  Data Encryption ‧WEP – In WPA or WPA-PSK mode, WEP is also able to be the encryption method for the transmission data. ‧TKIP – TKIP (Temporal Key Integrity Protocol) changes the temporal key every 10,000 packets (a packet is a kind of message transmitted over a network.) This insures much greater security than the standard WEP security. ‧AES – AES has been developed to ensure the highest degree of security and authenticity for digital information and it is the most advanced solution defined by IEEE 802.11i for the security in the wireless network. 18
  19. 19. Install Driver and Utility for Windows 2000 Step 1: Insert the CD into the CD-ROM device and execute the "setup.exe" program for your purchace G101/G231 series to select . Step 2: The InstallShield Wizard box will appear, click "Next" to continue. 19
  20. 20. Step 3: Licence Agreement ,Please choice “I accept the terms in the license agreement” and click "Next" to continue. Step4: Click "Install" button to continue. 20
  21. 21.  The driver and utility are Installing.  Click Finish to complete install procedure. 21
  22. 22. Step 5: Insert the G101/G231 WLAN adapter into the PCMCIA port/MiniPCI slot of your computer, the system will automatically find the device and search for its software then the InstallShield Wizard finished installation and the system tray icon is loaded in the taskbar (see illustration below). Note: Please turn-off computer before you insert G101.  Found New Hardware and Installing.  Complete device install. 22
  23. 23. Step 6:Please click “Start-> programs->TwinMOS ->G101_G231 WLAN Configuration Utility”.  The TM icon will appear in tray bar.  The “TwinMOS WLAN Configuration Utility” screen will appear. 23
  24. 24. Install Driver and Utility for Windows 98SE Step 1: Insert the CD into the CD-ROM device and execute the "setup.exe" program for your purchace G101/G231 series to select . Step 2:The InstallShield Wizard box will appear, click "Next" to continue. 24
  25. 25. Step 3: Licence Agreement ,Please choice “I accept the terms in the license agreement” and click "Next" to continue. Step 4: Click "Install" button to continue. 25
  26. 26.  The driver and utility are Installing.  Click Finish to complete install procedure. 26
  27. 27. Step 5: After running the driver package, the Notebook (or PC) with Win98 OS shall be restarted Step 6: Insert the G101/G231 WLAN adapter into the MiniPCI slot/PCMCIA port of your computer, the system will automatically find the device and search for its software then the InstallShield Wizard finished installation and the system tray icon is loaded in the taskbar (see illustration below). Note: Please turn-off computer before you insert G101. 27
  28. 28.  New Hardware Found Step 7: Please insert the disk labeled "Windows 98 Second Edition CD-ROM." Step 8: Choose Windows 98SE folder 28
  29. 29. Step 9: Copying Files Step10:Please click “Start-> programs->TwinMOS ->G101_G231 WLAN Configuration Utility”. 29
  30. 30.  The TM icon will appear in tray bar..  The “TwinMOS WLAN Configuration Utility” screen will appear. 30
  31. 31. Utility Usage for G101/G231 WLAN Adapter Step 1 Please click “All programs->TwinMOS->G101_G231 WLAN Configuration Utility”. Or to double-click on the icon shown below. The “TwinMOS WLAN Configuration” screen will appear.  Or to double click the icon  The “TwinMOS WLAN Configuration Utility” screen will appear. 31
  32. 32. Step 2: This screen shows all Access Points or Adapters nearby when operating in Infrastructure. Click “Rescan” button to collect the SSID and Strength information of all the wireless devices nearby. If you want to connect to any device on the list, double- click the item on the list, and the adapter will automatically connect to the selected device. 32
  33. 33. Install Driver and Utility for Linux NOTE 1: Before driver install, Please make sure below.  System Environment: Linux kernel 2.4 Wireless tool 16. NOTE 2:  Feature list: 1. Full compliance with IEEE 802.11g standard 2. Support short preamble 3. Support RTS/CTS mechanism 4. Support de-fragmentation at receiving 5. Auto channel selection at system startup 6. Support static WEP keys of 64 and 128 bits  Known issues: 1. Multicast Test is not supported. 2. Power save has not been implemented yet. 3. Data payload has not been tested yet. 4. Support for big-endian platform has not been implemented. 33
  34. 34. The Station Driver provides IEEE 802.11b/g station functionality. This document covers its available I/O control commands on Linux platform. To describe I/O control command support by TwinMOS G101/G231 Station on Linux platform. This can be a user interface developer’s reference to provide users a WEB or command-line based control environment. 34
  35. 35. 1. Installation steps: Step 1: Execute "insmod –f IPN2220STA.o " at the directory where the IPN2220STA.o is located. By default, the STA will find a non-WEP AP with the most powerful signal strength to join. Step 2: Execute "./iwconfig" to display connection status Step 3: Execute "ifconfig wlan0 192.168.xxx.xxx" to assign an IP to STA. Notice that “wlan0” is the device name of our STA.  After step 3, the connection is established. 2. Network related setting:  Item 1: To change the MAC address of IPN2220 station, execute “./ifconfig wlan0 hw ether xxxxxxxxxxxx” (xxxxxxxxxxxx denotes the new MAC address you want to set) before you specify an IP address to the IPN2220 station.  Item 2: To perform site survey, execute "./iwlist wlan0 scanning" to scan all channels and display the scan results. Notice that the wireless-extension version should be at least 15 for iwlist/iwconfig utilities to execute this command.  Item 3: To join a different BSS, execute "./iwconfig wlan0 essid XXX" (XXX denotes the essid of AP you want to join)  Item 4: To specify the channel of the ad-hoc network you want to create, execute, 35
  36. 36. “./iwconfig wlan0 channel N” (N denotes the channel of the ad-hoc network you want to create, from 1 to 11)  Item 5: To change from infrastructure mode to ad-hoc mode, execute "./iwconfig wlan0 mode ad-hoc" then execute "./iwconfig wlan0 essid XXX" (XXX means the essid you want to set/join to the IBSS network)  Item 6: To change from ad-hoc mode to infrastructure mode, execute "iwconfig wlan0 mode managed" then execute "./iwconfig wlan0 essid XXX" (XXX means the essid of AP you want to join)  Item 7: To join different BSS, execute "./iwconfig wlan0 essid XXX" (XXX means the essid of AP you want to join) 3. Network related setting:  To enable WEP or change WEP key, please refer to the instructions below: (1) To set WEP key to key set $i, enable WEP and use key set $i as WEP key, the command is "./iwconfig wlan0 key xxxxxxxxxx [$i]" ,(xxxxxxxxxx denotes WEP key)($i:1~4) (2) If you execute "./iwconfig wlan0 key xxxxxxxxxx" , (xxxxxxxxxx denotes the WEP key) without specifying the key ID "[$i]", then the default WEP key ID will be 1. (3) To disable WEP at any time, the command is "./iwconfig wlan0 key off". 36
  37. 37. (4) To enable WEP that you have set before via (1) or (2) or (3), the command is "./iwconfig wlan0 key on". (5)To enable WEP and use key set $i as WEP key.($i can be 1~4) that you have set before via (1) or (2) or (3), the command is "./iwconfig wlan0 key [$i]"  If you want to join a BSS with different WEP key setting, execute the following two command. (1) "./iwconfig wlan0 key xxxxxxxxxx", (xxxxxxxxxx denotes WEP key) (2) "./iwconfig wlan0 essid XXX", (XXX denotes the essid of AP you want to join) (3) Notice, the executing sequence is unrelated in infrastructure mode. But in ad-hoc mode, you must execute (1) first or you will create an ad-hoc network with the same SSID but different WEP setting. 4. Remove step:  To turn off STA and remove the module, execute "ifconfig wlan0 down" then execute "rmmod IPN2220STA" NOTE: More detail setting please access to User’s Manual on CD. 37

×