KBS-1400 manual


Published on

  • Be the first to comment

  • Be the first to like this

No Downloads
Total Views
On Slideshare
From Embeds
Number of Embeds
Embeds 0
No embeds

No notes for slide

KBS-1400 manual

  1. 1. Wireless USB adapter 802.11b/g 54M USB 2.0 wireless LAN adapter
  2. 2. Ethernet network attached storage
  3. 3. Ethernet network attached storage Disclaimer • We spared no efforts to make sure that the information in this manual is correct and complete. However no liability is accepted for any errors or omissions. Gembird Electronics reserves the right to change the specifications of the hardware and software described in this manual without prior notice. • No part of this manual may be reproduced, transmitted or translated in any language in any form, by any means, without the prior written permission of Gembird Electronics Ltd. • Gembird Electronics makes no warranties for damages resulting from corrupted or lost data due to a mistaken operation or malfunction of the product, the software, personal computers or peripheral devices. Gembird® is a registered trademark of GMB Tech (Holland) bv. Other names or products not mentioned above may be registered trademarks or trademarks of their respective owners. Copyright © 2007 Gembird Electronics Ltd. All rights reserved.
  4. 4. Ethernet network attached storage NICW-U3 User manual Introduction Thank you for buying the Gembird® 802.11b/g 54M USB 2.0 wireless LAN adapter! This manual will help you install and use it properly. Features • Supports data transfer rate up to 54Mbps • Auto fallback data rate under noisy environment • All modern encryption security standards including 256-bit • Supports Wireless Roaming - can be moved from one access point to another without interruption of connection
  5. 5. Ethernet network attached storage Specification • Complies with IEEE802.11g, IEEE802.11b • Transmit Speed Auto-Negotiation, up to 54M • USB 2.0 connector • Supports Ad-Hoc/Infrastructure modes • Standard / protocol: IEEE 802.11g; IEEE 802.11b; USB2.0; CSMA/CA with ACK • Frequency Range: 2.4-2.4835GHz • Data Rate: 54/48/36/24/18/12/9/6/11/5.5/2/1 Mbps (Auto Rate Sensing for OFDM/CCK/QPSK/BPSK modulation Technology) • Security: WPA; 64/128/256-bit WEP; TKIP/AES, WEP2 • Modulation technology: Orthogonal Frequency Division Multiplexing (OFDM)/Complementary Code Keying (CCK) • Transmitter output power: 20dBm (MAX) • Internal antenna type • Supports Windows 2000/XP/VISTA; Linux(Unix); Mac OS(10.3/10.4) • Size: 82mm x 25mm x 9mm • Weight: 55g
  6. 6. Ethernet network attached storage • Operating temperature: 0 ~ 40C • Storage temperature: -40 ~ 70C • Humidity: 5 ~ 95% non-condensing
  7. 7. Ethernet network attached storage Installation Install illustration: "The CD-ROM installs method" is belong to a method of normal install drive, if appear an unconventionality during the period of installation, Please handle according to "System install method automatically" or "Equipments management machine install method" (the following instruction setup the USB wireless adapter under Windows XP). CD-ROM installs method • First insert the USB wireless to USB port of the computer. After turn on the computer power to enter operation system, the system will show "FOUND NEW HARDWARE WIZARD", and click "cancel" close dialog box.
  8. 8. Ethernet network attached storage
  9. 9. Ethernet network attached storage • Please put the driver CD into the CD-ROM, and double click "Setup.exe". (Fig 3)
  10. 10. Ethernet network attached storage
  11. 11. Ethernet network attached storage • The system appears a dialog box automatically for drive to install. Customer according to "drive to install a wizard to carry on to install gradually". • The installs procedure finished, click "Finish". Note: If at installs procedure doesn’t pass the Microsoft Attestation, click "still continue"
  12. 12. Ethernet network attached storage here.
  13. 13. Ethernet network attached storage System installs method automatically • First time, Refer to "CD-ROM installs method" step 2 to installs driver, the system appear "find out a new hardware wizard" dialog box open automatically, after find out the equipments, the choice "from the software automatically", the Click "next move".
  14. 14. Ethernet network attached storage • In "Please choose your search and installation options" dialog box, Click "Browse" to designate paths of driver, and click "Next". Example: (CD-ROM) E:driverRTL8187WINXP
  15. 15. Ethernet network attached storage • The system appear installs software procedure. • Then installs finished, Click" finish" to complete installs.
  16. 16. Ethernet network attached storage Note: If at installs procedure doesn’t pass the Microsoft Attestation, click" still continue" here.
  17. 17. Ethernet network attached storage Equipments management installs method • First insert the USB wireless adapter to USB port of the computer. After turn on the computer power to enter operation system, the system could show “FOUND NEW HARDWARE WIZARD”, and click "cancel" close dialog box • Use right key to Click "my computer", appear attribute dialog box, choose "properties → hardware → device manger", select “device manger”
  18. 18. Ethernet network attached storage • On “device manger” dialog box, Choose “ Ethernet Controller”
  19. 19. Ethernet network attached storage • Use right key click the equipments , choose " Update driver …". • Appear dialog box, and choose “Install from a list or specific location (Advanced)”, click “Next”. • Last step refer to “The system installs method automatically” step 2 … 4.
  20. 20. Ethernet network attached storage Configuration your wireless adapter • The Wireless Client Configuration Utility screen will appear automatically.
  21. 21. Ethernet network attached storage • Chose Available Network into Available Network dialog box, then click Refresh button to search for available wireless networks.
  22. 22. Ethernet network attached storage • To connect to one of the networks on the list, select the wireless network, and click Add to profile button.
  23. 23. Ethernet network attached storage • Then Click OK button, appear a Wireless network properties dialog box, click OK button back to PROFIL option screen
  24. 24. Ethernet network attached storage • Then click General option screen, View network state on the option screen Congratulations! You’ve successfully configured your wireless adapter!
  25. 25. Ethernet network attached storage