Process journal

422 views
356 views

Published on

0 Comments
0 Likes
Statistics
Notes
  • Be the first to comment

  • Be the first to like this

No Downloads
Views
Total views
422
On SlideShare
0
From Embeds
0
Number of Embeds
1
Actions
Shares
0
Downloads
4
Comments
0
Likes
0
Embeds 0
No embeds

No notes for slide

Process journal

  1. 1. Moving toy Process Journal Drawing, Measuring Cutting the shape of sea Picture of wearing safety Picture of measuring distances of my Picture of cutting wood coat toy. 20/9/2011 What you did: Today I was really busy, I needed to draw, measure, and cut. First, I woresafety coat. Second, I drew my toy. It was really hard draw sea so I got help from teacher.Third, I measured distances and drew sea again on the another side of wood. Finally, I cutmy wood. It was difficult to use coping saw. It was my first time using coping saw, becauselast year I didn’t make round shapes. I needed to cut many spaces, and the spaces werereally small so it was kind of hard to cut.Emotion: I was really happy to make toy for kids. Also, I was concerned about I can makethis toy well or not.AOI: I chose environment, because I need to save wood so I don’y have to pollute nature.What next: I have to cut all unnecessary spaces, I have to make tree for my toy.Learner profile: I’m a thinker, because I was thinking how to draw sea and how I cut this seashape.Why: I liked to cut the wood, because I liked the sound of cutting and feel of cutting thewood.
  2. 2. Cutting the shape of sea Picture of wearing safety apron Picture of cutting wood by using using coping saw 22/9/2011What I did: I was cutting wood again. It was really hard to cut the wood that shape is sea.There were many curved lines so I needed to cut many spaces. It was kind of difficult to cutoutside of curved lines. I was trying hard to cut outside of curved lines, but sometimes I cutlines. I just used coping saw, because I only cut the wood.Emotion: I was little bit sad that I couldn’t finish one shape. I will try to cut one shape in oneday. I was happy to make difficult shape, because next time I can know what tool I need touse.AOI: AOI is environment, because I’m using wood and wood is part of nature.What next: I have to finish cutting the shape of sea. Then I need to find long round shape tomake tree. I have to cut the shape of sea as quick as I can so I can go to next step.Learner profile: Learner profile is thinker, because I’m thinking which side of angle will begood to cut curved lines. Also, I think I’m a risk taker, because I want to try new tool tomake toy.Why: I liked to cut many things, but I hate to cut curved lines. There are many reasons whyI hate to cut curved lines. First, It’s hard to cut curved lines. Second, if I cut the wood in notgood angle, I need to cut the shape again. Lastly, when I cut curved lines, I need to usecoping saw to cut
  3. 3. Using disk sander, and using half round filesPicture of using half round files to Picture of using disk sander to Picture of cutting my shape ofmake my shape round make my wood round, and sea smooth 26/9/2011 What you did: Today I was doing many things. First, I was cutting my shape of sea. It was hard to cut curved lines, but I did it. Second, I used disk sander to make my shape equal. It was kind of hard to make equal so I had to work on for like 15 minutes. Lastly, it was kind of hard to use half round files. It was hard to use that, because it was not really getting smooth, and getting equal. Also, I forgot write it, I wore safety goggles when I was using disk sander, because wood pieces can go to my eyes. Emotion: I was really happy that I did many things in one day. AOI: AOI is environment, because I’m trying to save wood so that I’m not wasting wood. What next: I have to make my island equal, and round. Then I have to make tree shape. I think it will be really hard to make it, but I will try to make tree shape. Learner profile: I think I am risk taker, because I’m trying new things. Also, I think I am thinker, because I’m thinking about which angle will be good to cut wood. Why: I liked to use disk sander, it’s dangerous machine so I had to be careful. I hate to use half round files, but I had to use for making my toy round, and smooth. Even if I hate to use some tool, I will try to make my toy the best in our class.
  4. 4. Filing my shape of the island27/9/2011What you did: I was filling wood whole time. It was really hard to file mywood, because there were some cut part. It was kind of hard to goodmark from a teacher. I was trying my best to file my wood. I don’t knowwhy I was filing my wood whole time. I used half round files to file mywood.Emotion: I was sad that I couldn’t finish filling my wood. However, I washappy that I’m doing next step next time.AOI: AOI is environment, because I’m trying my best to save wood soI’m not destroying environment.Learner profile: I think I am risk taker, because I’m trying new things thatI haven’t done before.What next: I need to get new wood, and make wood shape. I think it willbe one of the hardest thing in my toy.Why: I liked when I was cutting or disk sanding, but I was really tiredwhen I was filling whole time. I think I need to be better at filling wood.Picture of filling wood Picture of wearing apron
  5. 5. Using trimmer router to make edges of toy round29/9/2011What you did: I was filing my wood first, and I used trimmer router tomake my toy round. It was kind of hard to use trimmer router, because ifI press so hard, black thing will come out. I needed to get teacher’spermission to use the trimmer router. Also, I had to wear safety gogglesto make my eyes safe.Emotion: I was happy that I used new tool. It was kind of nervous to use,but I was happy to use trimmer router.AOI: AOI is environment, because I’m trying to save wood by not makingmany mistakes.Learner profile: Learner profile is risk taker, because I used new tool thatname is trimmer router.What next: I need to file my wood again to make my wood smooth, thenI need to draw circle on my wood.Why: I was really nervous about using trimmer router, but when I wasusing that I got really fun of using trimer router. I want to use that toolagain. Picture of filing wood Picture of using trimmer router
  6. 6. Using half round files andsand paper to make my toyedges round10/10/2011What you did: Today I was just using half round files and sand paper tomake my toy round and soft. I was just using sand paper about 1hour. Itwas really hard to make my toy round and soft. It was really hard to getgood mark from a teacher. So I had to sand and sand for long time. Iwas really angry, when I need to sand again.Emotion: I was tired, because I need to sand my toy about 1 hour.AOI: AOI is environment, because I’m trying save wood to not harm thenature.Learner profile: Learner profile is risk taker, because I’m trying newthings. Also, I think I am think, because I am thinking which placeneeded to be filed.What next: I need sand more and I need measure and mark out for treeshape.Why: I was really angry when I need to sand for 1 hour. I was really tiredof sanding my toy.Picture of filing wood Picture of wearing apron
  7. 7. ! Sanding my base by using garnet paper 12/10/2011 What you did: Today I was keep sanding my wood. I was really tired of sanding my wood. I was keep sanding my wood, because I needed to make my wood not sharp, and smooth. I used garnet paper to make my wood smooth. Emotion: I was tired of sanding my base. I think I need to improve to finish sanding my wood. AOI: AOI is environment, because I’m trying save wood to not harm the nature. Learner profile: Learner profile is thinker, because I am thinking which angle will be good to sand. What next: I need to find wood that is good for make tree. Why: I liked when I was sanding my wood for 10 minutes, but I was getting tired when I was sanding my wood for 1 hour. I was really tired of sanding my wood. ! Picture of using sand blockPicture of wearing apron
  8. 8. Measuring and mark outwood for tree shape15/10/2011What you did: I found new wood to measure and mark out wood for treeshape. It was hard to make 2 parts same. I was trying my best tomeasure and mark out my wood for tree shape. When I finished markingout, it was time to go so I couldn’t get check.Emotion: I was little bit sad that I couldn’t get check from teacher. I washappy that I was measuring and mark out wood for tree shape.AOI: AOI is environment, because I’m trying to save wood to not harmthe nature.Learner profile: Learner profile is risk taker, because I started tomeasure and mark out wood for tree shape.What next: I need to get check from teacher, and I need to cut wood fortree shape.Why: I was happy to do new thing, but I was in difficulty when I wasmeasuring and marking out wood for tree shape. It was hard to make 2parts same. Measuring and marking out Picture of wearing apron wood for tree shape.
  9. 9. Cutting wood for tree shape17/10/2011What you did: I was keep cutting wood for tree shape. It was really hardto cut, and I broke one coping saw. I cut wood like 30minutes I think.When I finished cutting wood, teacher helped me cut hard parts. Then Iwas filing my wood to make my wood smooth.Emotion: I was happy that I went to next step. Also, I was tired of filingwood again.AOI: AOI is environment, because I’m trying to save to wood to not harmthe nature.Learner profile: Leaner profile is risk taker, because I’m trying new thingsthat I didn’t try in my life. Also, I think I am thinker, because I’m thinkingwhich angle is good to cut.What next: I need to file my wood more, and I need to cut another woodfor tree shape.Why: I was really happy that I started next step. However, I was little bittired when I need to cut wood for 30 minutes. I think I need to be betterand cutting wood. Picture of cutting wood Picture of filing wood
  10. 10. Cutting another wood for tree shape and filing wood 18/10/2011 What you did: I was cutting another wood for tree shape. I was trying my best to cut my wood. It took 20 minutes to finish cutting wood for tree shape. However, I broke one coping saw when I was cutting leaves. It was my second time breaking coping saw. I think I need to be careful when I cut wood. Also, I started filing my two pieces of wood for tree shape. It was kind of hard to make smooth, but I tried my best to make smooth. Emotion: I was little bit sad when I broke one coping saw, but I was happy when I started filing my wood for tree shape. AOI: AOI is environment, because I’m trying save wood to not harm the nature. Learner profile: Learner profile is risk taker, because I’m trying new things. Also, I think I am thinker, because I am thinking which angle will good to cut wood. What next: When I finish filing my wood, I need make turtle shape. I think it will be hard to make turtle shape, but I will try my best to do it. Why: I was happy when I went to next step, but I was little bit sad when I started to file wood. I will try my best to make my toy nice.Picture of cutting another shape of Picture of filing wood for tree shapewood for tree shape.
  11. 11. Filing wood by using halfround files22/10/2011What you did: I was trying to file wood for tree shape in one period. I wasfiling everywhere that I can file. I was using half round file to file woodthat made for tree shape. When I got checked by teacher, teacher saidit’s great. Then I was going to use disk sander to make my woodsmoother, it was time so I couldn’t.Emotion: I was glad that teacher said great, and I was happy that Ifinished filing wood in one period.Learner profile: I think I am thinker, because I’m trying to find how tomake wood smooth.AOI: AOI is environment, because I’m trying to save wood to not harmthe nature.What next: I need to use disk sander to make my wood smooth, and Ineed to file another wood for tree shape.Why: I was trying really hard to get my wood smooth. However, it waslittle bit hard when it came to hard part. Sometimes there is line so I hadto make that line erased. It was kind of hard, but I was trying my best tosand my wood. Picture of using half round files to file wood.
  12. 12. Disk sanding and filingwood28/10/2011 What you did: I was disk sanding my wood to make my wood smooth. Itwas hard when I was disk sanding hard part. Then I was filing anotherwood. It was harder than what I filed before. I think it will took 2 days tofile perfectly. Also, I marked with pencil where I need to disk sand wood.Emotion: I was kind of happy when I finished filing one wood. Also, I waslittle bit tired of filing another wood.AOI: AOI is environment, because I’m trying save wood to not harm thenature.Learner profile: I think I am risk taker, because I’m doing new things thatI didn’t do before.What next: I need to sand my wood a lot, and I need disk sand woodthat made for tree shape. Then I need to make one block to put underthe tree.Why: I was little bit nervous when I was disk sanding, because I thoughtthat is this right way to do it. Also, I was happy when I start to file another wood, but I was tired when I started to file Picture of using disk sander to make wood smooth. wood. Picture of marking where I need to disk sand.
  13. 13. Disk Sanding, filing, and using drill woodto make wood smooth, and make hole31/10/2011What you did: I was filing wood with half round files. It was little bit hardwhen I need to file difficult part. Then I used disk sander to make mywood smooth, and equal. I used pedestal drill to drill holes. It was littlebit nervous, but I did it. Then I was fling wood that for bottom of tree. Itwas not really working, but I was trying to make that wood smooth.Emotion: I was happy, because I did many things, but I was tired when Iwas filing wood again.AOI: I think AOI is environment, because I’m trying to save wood to notharm the nature.Learner profile: Learner profile is risk taker, because I was trying newthings.What next: I need to finish filing wood then I need to stick wood with treeshape wood.Why: I was happy when I finished many things, but I was tired when Ineeded to file again. I hate to file wood, but I was happy when I amgoing next step. Picture of drilled hole ! ! ! Picture of using sand paper to make wood smooth.
  14. 14. Using PVA glue and using screws to make 3 woodsstick.Also, cutting turtle shape wood.4/11/2011What you did: I was using PVA glue to stick 2 tree shape wood, and littleblock. Then, I drilled more to make put screws easier. I was puttingscrews to make woods stick. It was kind of easy, but I heard somebreaking sounds. Then I brought wet cloth to wipe off the2 extra PVAglue. Also, I was filing wood to make wood smooth. One more that I wasusing pedestal drill to drill holes. Then I was cutting wood that is forturtle. It was kind of hard to cut turtle shape wood. I was trying hard tocut the wood.Emotion: I was happy, because I’ve done many things today. I was littlebit tired when I was cutting turtle shape wood.Learner profile: I think I’m risk taker, because I’m doing new things. Ihaven’t done like using pedestal drill to drill holes.AOI: AOI is environment, because I’m trying to save wood not to harmthe nature, so I try not to make mistakes and waste wood. We are usingwood to make toy so it’s connects to environmentWhat next: I should file more, and I need to cut turtle more to get perfect.Then I need to file the turtle shape wood. Also, I need to file tree shapemore to make my wood smooth.Why: I was happy when I finished many processes, but I was little bittired when I need to do more processes. I think I’m really back thanothers. I think I need to speed up to finish quickly.Picture of unfinished cutting Picture of finished stickingturtle shape wood. three woods.
  15. 15. Filing and using garnet paper to makewood smooth7/11/2011What you did: I was keep filing wood about 30 minutes, and I was usinggarnet paper for rest of time to make wood smooth. It was kind of tiringand it was kind of boring to sand and file. I was trying hard to file andsand wood to make smooth. I was using half round file to make my woodsmooth.Emotion: I was tired when I needed to file and sand wood. I was happy,because I’ve done many processes.AOI: AOI is environment, because I’m trying to save wood not to harmthe nature, so I try not to make mistakes and waste wood. We are usingwood to make toy so it’s connects to environmentLearner profile: Learner profile is communicator, because I amcommunicating with people to give suggestions of my toy.What next: I need to file and sand wood more and I need to work onturtle shape wood. Then I need to file and sand turtle shape wood again.Why: I was happy when I finished many steps. However, there weremany steps left so I think I need to finish quickly as I can. It is really hardto do one step so I think I need to try my best to finish making toy. Picture of using garnet paper and sanding block to make wood smooth. Picture of using half round file to file wood.
  16. 16. I was using disk sander to make turtle shape wood smooth, and remove extra parts. 8/11/2011 What you did: I was using disk sander to make turtle wood smooth, and I removed extra parts. It was kind of hard, because I needed to change board’s angle so that I can disk sand some difficult parts. Then I was drilling holes in the base, which is island. I was using pedestal drill to drill holes. Then I was putting nails to put stick island and tree. I was concerned with how to put two things in right way, and it was time so I had to do next time. I was filing trees more so I can have trees smooth. I also put woof fill thing to cover a hole. Emotion: I felt little bit tired when I need to screw nails to stick island and trees. AOI: AOI is environment, because I’m trying to save wood not to harm the nature, so I try not to make mistakes and waste wood. We are using wood to make toy so it’s connects to environment Learner profile: I think I am inquirers, because I am curious and enjoy learning tools. What next: I need screw nails to stick island and trees. Then I need to stick trees and turtle. I think it will took long, but I will try to finish making toy. Why: First time it was kind of fun, but now it’s little bit hard. The reason why, because there are many steps to follow. However, I’m trying to make toy perfect to make children play with my toy. I think it will be difficult job, but I will try my best to make toy best.Brown thing is wood filler to cover a Picture of using garnet paper to make wood smooth
  17. 17. Drilling holes in turtle and trees11/11/2011What you did: I was drilling hole in island first to help join the trees andisland. It was kind of hard to drill, but I tried my best. Then I was stickingisland and trees together. However, because of I drilled deep I needed touse another screws to stick together. I was drilling hole and trees too,because I want to stick two together. It was kind of scary when I wasdrilling hole on turtle. I used pedestal drill again to drill hole on the turtleand trees. I used screw driver and screwss to stick island and trees.Emotion: I was little bit nervous when I was drilling holes on turtle. Also, Iwas little bit sad that I’m behind from others.Learner profile: Learner profile is communicator, because I amcommunicating with friends to ask is this looking good or not.AOI: AOI is environment, because I’m trying to save wood not to harmthe nature, so I try not to make mistakes and waste wood. We are usingwood to make toy so it’s connects to environment.What next: I need use PVA glue to stick turtle and trees. Then I need tofile little bit more and I need paint all the woods. I think it will took longtime, but I will try my best to finish my toy.Why: I thought it will took not long, but it took really long time so I think Ineed to finish working on toy quickly. I think I waste my time on filing andcutting. I will try my best to finish the toy and I will try to make my toybeautiful or fantastic. Picture of drilling hole on tree shape wood.
  18. 18. Painting my toy14/11/2011What you did: I was painting my wood. It was kind of nervous when Iwas painting. Because if I do mistake, I couldn’t fix it. I was trying mybest, but I got a lot of punishment from teacher. The reason why,because I put cap of bottle, which has paint on the table. Later I didanother mistake so I think I need to be better at painting. Even if I gotmany punishments, I will try my best to paint my toy. I used paint brush,cardboard, and water bottle to paint my toy.Emotion: I was tired when I got many punishments and I was nervouswhen I started to paint my toy.Learner profile: Learner profile is communicator, because I amcommunicating with friends to make my toy better.AOI: AOI is environment, because I’m trying to save wood not to harmthe nature, so I try not to make mistakes and waste wood. I’m usingwood to make toy so it’s connects to environment.What next: I need to paint tree more and I need to paint island. I need tofile when I finished painting my toy. Then I need to connect turtle andtrees with spring.Why: I was tired when I got many punishments, but I will try my best topaint my toy. It could be hard to fix when I do mistake, but I will try toconcentrate on my own work. Picture of not finished painting tree shape wood.
  19. 19. Sanding and painting my toy16/11/2011What you did: I was sanding my toy first to make my toy smooth. Then Iwas painting my toy. I used paint brush, paint, and water to paint my toy.I was trying to paint well,but it’s not working really well. I was paintingnew part, which is island and sea part. I didn’t paint sea part, but I paintisland part. The color tree that I painted was so light, but I wanted tohave dark color. However, this toy is for kids so I will just paint withbrown that is light. I used paint, which is acqualic paint.Emotion: I was little bit sad when I the color of tree is bright. Also, I wastired when I need to paint again and again.AOI: AOI is environment, because I’m trying to save wood not to harmthe nature, so I try not to make mistakes and waste wood. I’m usingwood to make toy so it’s connects to environment.Learner profile: Learner profile is communicator, because I amcommunicating with friends to make my toy better.What next: I need to paint all the parts and I need to sand my toy tomake my toy smooth.Why: I was happy when I feel my toy smooth, but when I paint the woodgot rough. I needed to sand again to make to make smooth. I wasthinking every time when I could finish making my toy. Picture of paint brush Picture of acqualic paint
  20. 20. Sanding my toy and painting my toy again17/11/2011What you did: I was sanding my toy to make wood smooth. It was kind ofeasy, but it was kind of hard to paint. Painting was the hardest job forme, but I was trying hard to paint. There was one accident, which little bitbrown color got on the island so I had to sand really hard. When Ipainted island with yellow paint, the brown color was coming out little bit.Next time, I had to sand really hard again and paint my toy. I think mytoy will finish on tuesday. I was using paint, paint brush, cardboard,water to paint the toy.Emotion: I was happy when I almost finished with my toy. However, Iwas sad that we don’t have much time to finish the toy.AOI: AOI is environment, because I’m trying to save wood not to harmthe nature, so I try not to make mistakes and waste wood. I’m usingwood to make toy so it’s connects to environment.Learner profile: Learner profile is communicator, because I was trying todiscuss with friends about how can I paint well or what paint will beappropriate for this wood. I also think I am risk taker, because I wastrying to use new tools.What next: I need to sand the toy again to make my toy soft. Then Ineed to paint the toy to make the toy pretty. I want to have like 3 days topaint last part, but there is only 2 days so I think I need to work hard.Why: I was happy when I got to last part, but I was sad when have only3 days. I had to stick wood and turtle with spring, but I need to paint andsand. So I think I better be finished on monday. That can make me finishmaking toy on tuesday. Picture of cardboard Picture of garnet paper
  21. 21. Sanding and painting the toy again 21/11/2011 What you did: I was sanding the toy again to make smooth and to paint again. Then I was using paint, paint brush, cardboard and water to paint my toy. I was trying to paint my toy nicely, but it’s not working very well. First I was painting leaves then I was painting island, sea and trees to finish making toy. I need to sand and paint sea again and I need to stick turtle and tree to finish my toy. Emotion: I was little bit happy when I am almost at the last stage. Also, I was tired of sanding and painting the toy again. AOI: AOI is environment, because I’m trying to save wood not to harm the nature, so I try not to make mistakes and waste wood. I’m using wood to make toy so it’s connects to environment. Learner profile: Learner profile is communicator, because I was trying to discuss with friends about how can I paint well or what paint will be appropriate for this wood. I also think I am risk taker, because I was trying to use new tools. What next: I need to sand and paint sea again. Then I need to use some kind of glue to stick trees and turtles. Why: I was happy when I did many steps, but I was tired when I was filing or sanding the wood. I was really tired of doing same job for 2 or 3 periods.Picture of painting leaves Picture of unfinished toy

×