Oils And Lubricants By See Lube Technologies Private Limited

COMPANY PROFILE
SEE LUBE TECHNOLOGIES PVT. LTD.
(Under Technical Collaboration with Lyzo Lubes, Denmark)
CORPORATE OFFICE
30, GURU NANAK MARKET, FOCAL POINT, NEAR UPPER INDIA
STEELS, LUDHIANA 141010 ( PB) INDIA
PH NO : +91 161 2675525, 5051296, 4641296, 5004600
EMAIL : info@seelube.com
Web : www.oilandlubricant.com

See Lube was incepted in 2009 with a vision of becoming 100% Indian company
to become full line supplier with world class quality at economical cost to its
customers.
Company was started with single product portfolio, now we have more than 50
products catering to each segment of industry.
Company is having its base in Ludhiana, the Industrial Capital of State Punjab.
In 2017 company got in Technical Collaboration with Lyzo Lubes, Denmark. The
promising European Technology is now available with company.
(Under Technical Collaboration with Lyzo Lubes, Denmark)
Who we are

infrastructure
 3000 MT ANNUAL OIL BLENDING CAPACITY
 2500 MT ANNUAL GREASE MANUFACTURING CAPACITY
 STATE OF ART BLENDING VESSELS & REACTORS
 19000 SQ FEET FLOOR AREA
 2700 SQ FEET OFFICE
 FULLY EQUIPPED LABORATORY

laboratory
Viscosity baths for 400 & 1000 C
Fully Calibrated Viscometers
Hydrometers
Hot Air Ovens
Hot Plates
Oxidation Stability test
equipment
Penetrometer
Emulsion Stability Test
Biological test apparatus for MWF
Ph Meters
TDS Meters
KF Titrimeters
Magnetic Stirrers
Corrosion Inhibition test
Drop Point Test Apparatus
High Speed Mixer
Flash Point Apparatus

IN HOUSE LAB
FACILITIES
VISCOSITY AT 400
C & 1000
C
VISCOSITY INDEX
SP. DENSITY
WATER CONTENTS
EMULSION STABILITY TEST
BIOLOGICAL TEST
FOAMING TEST
C I TEST
INITIAL BOILING POINT
FINAL BOILING POINT
ANILINE POINT
POUR POINT
BDV TEST
DROP POINT OF GREASE
OXIDATION STABILITY
ROLLING STABILITY
PENETRATION
DUST CONTAMINATION TEST
PATCH TEST
EMULSION STABILITY TEST
CONCENTRATE STABILITY TEST
TAN / TBN TEST
FLASH POINT
FIRE POINT

ISO certification

Quality policy
“We, at See Lube Technologies
dedicate our selves to produce quality
products which suits to all the
customer requirements through
continual improvement in Quality
Management Systems”

Environmental
policy
“WE AT SEE LUBE TECHNOLOGIES PVT. LTD. STRIVE TO PERFORM ECO-
FRIENDLY AND HUMAN SAFELY ACTIVITIES FOR MANUFACTURING OF
QUALITY LUBRICANTS AND CONTINUALLY IMPROVE OUR ENDEAVOR
BY:-
MONITORING AND WHERE REQD. CONTROL OF OUR ACTIVITIES TO
PREVENT POLLUTION AND ACCIDENTS AND CONSERVATE RESOURCES.
COMPLY WITH ENVIRONMENT REGULATIONS AND LEGISLATIONS BY
REDUCING THE IMPACT OF OUR ACTIVITIES ON AIR, WATER & LAND.
CREATING AWARENESS TO OUR EMPLOYEES & SOCIETY”

WHY US ???
 OUR OWN RESEARCH & DEVELOPMENT
 OWN TESTING FACILITIES
 HIGHLY EXPERIENCED TEAM IN R & D
 STATE OF THE ART MANUFACTURING FACILITY
 QUALITY ONE STEP AHEAD TO PEERS
 RAW MATERIAL TESTING BEFORE RECEIPT
 INTERMITTENT TESTING
 STRINGENT FINAL TESTING BEFORE DISPATCH
 COMMITTED DELIVERIES
 TAMPER PROOF ATTRACTIVE PACKING
 MORE THAN 1000 SATISFIED CUSTOMERS WITH REPEAT ORDERS
 EXCELLENT AFTER SALES SERVICE
 TOTAL CARE FOR CUSTOMERS

Product portfolio
MAJOR CATAGORIES
1) METAL WORKING FLUIDS
2) HYDRAULIC OILS
3) GEAR OILS
4) GENERAL GREASES
5) SPECIALITY GREASES
6) METAL CLEANERS
7) HOT FORGING LUBRICANTS
8) RUST SOLUTIONS
9) HIGH TEMO CHAIN OILS
10)STAMPING & FORMING OILS
11)EDM OIL
12) MAINTENANCE COATINGS

Metal working fluid
Water
Soluble
Neat Oil

Water soluble
Mineral Oil
ST KOOL 729
ST KOOL 72
ST KOOL 725
ST KOOL 750
ST KOOL 74 AL
Semi
Synthetic
ST KOOL ECO
SS
ST KOOL ECO
SPL
Synthetic
ST KOOL 1000
ST KOOL 15 T

NEAT CUTTING OIL
ST KOOL 801
ST KOOL 815
ST KOOL 875
ST KOOL 119 CF

HYDRAULIC OIL
ST KOOL HO IS AVAILABLE IN ISO
VG 32, 46 AND 68
ST KOOL HO AW IS AVAILABLE IN
ISO VG 32, 46 AND 68
NON ISO VISCOSITY GRADES ARE ALSO AVAILABLE ON REQUEST

GEAR OIL
ST KOOL GO IS AVAILABLE IN ISO VG
32, 46, 68, 90, 100, 220, 320, 460 &
680
ST KOOL GO CLP IS AVAILABLE IN ISO
VG 32, 46, 68, 90, 100, 220, 320, 460
& 680
NON ISO VISCOSITY GRADES ARE ALSO AVAILABLE ON REQUEST

General GREASES
ALL PURPOSE
MULTI PURPOSE
EXTREME PRESSURE ( EP)

speciality GREASES
HIGH SPEED GREASES
HIGH TEMPERATURE GREASES
HIGH LOAD GREASES
WATER RESISTANT GREASES
SYNTHETIC GREASES
WIRE ROPE LUBRICANTS
ANTI SEIZE COMPOUND

METAL CLEANERS
ST CLEAN RANGE OF CLEANERS ARE
REPLACEMENT OF SOLVENTS, KEROSENE, DIESEL
& ANY OTHER, WHICH ARE NOT
ENVIRONMENTAL FRIENDLY.
ST CLEAN RANGE OF CLEANERS ARE BIO
DEGRADABLE*, OPERATOR FRIENDLY AND CAN
BE USED IN SPRAY JET MACHINES, ULTRASONIC
MACHINES & WASHING MACHINES.

HOT FORGING
LUBRICANTS
WATER SOLUBLE POLYMER
ST FORGESTAR E
WATER DISPERSIBLE
GRAPHITE ST FORGESTAR G
GRAPHITE SUSPENSION IN
OIL ST FORGESTAR GO

RUST SOLUTIONS
ST CLEAN 301
THE RUST CLEANER
ST RUSTGO 411
THE RUST CONVERTER

HIGH TEMPERATURE
CHAIN OIL
ST KOOL 125
HIGH TEMPERATURE CHAIN OIL, AN ESTER BASED
FORMULATION TO LUBRICATE & PROTECT YOUR
CHAINS, SUBJECTED TO HIGHER TEMPERATURE.
TYPICAL APPLICATION CHAINS OF PAINT BOOTHS.
ST KOOL HTCO
AN ECONOMICAL SEMI SYNTHETIC BASED
FORMULATION TO LUBRICATE & PROTECT YOUR
CHAINS, TYPICAL APPLICATION STENTER.

EDM OIL
ST EDM 250
HIGH FLASH POINT, HIGH B.D.V, NEGLIGIBLE AROMATIC
CONTENTS, CLEAR WHITE, ULTRA THIN, BRIGHT & CLEAR

MAINTENANCE
COATINGS
1)STRIPPABLE PVC COATINGS FOR LONG
TERM PROTECTION
2)PERMANENT CLEAR LACQUER
3)HIGHLY PURE ZINC PAINT
4)HIGH TEMPERATURE ALUMINIUM PAINT

OUR PACKINGS
FOR OILS & CHEMICALS
27 LTRS & 210 LTRS
FOR GREASES
1KG, 5 KG, 18 KG & 180 KGS

OUR MOTTO
YOUR PARTNER IN
INCREASING PROFITS BY
VALUE ENGINEERING

THANKS
30, GURU NANAK MARKET, FOCAL POINT, LUDHIANA 141010 ( PB) INDIA
PH NO : +91 161 2675525, 5051296, 4641296, 5004600
EMAIL : info@seelube.com
Web : www.oilandlubricant.com

Oils And Lubricants By See Lube Technologies Private Limited

Recommended

Recommended

More Related Content

More from IndiaMART InterMESH Limited

More from IndiaMART InterMESH Limited (20)

Recently uploaded

Recently uploaded (20)

Oils And Lubricants By See Lube Technologies Private Limited